Flash player problem

Tutorials Win: Microsoft Windows Forum

- Previous
 - 1
 - Disabling COM1 debug output I am trying to disable debug output on COM1. I searched on the groups for this and I found some answers. However, applying them doesn't seem to work. What I tried to do was to (based on the few posts I found on the subject) modify public\common\oak\csp\i486\oal\debug.c by setting ucComPort to 0 right before the switch statement so that it becomes: pBootArgs->ucComPort = 0; switch ( pBootArgs->ucComPort ) { case 1: IoPortBase = (PUCHAR)COM1_BASE; break; [...] default: IoPortBase = 0; break; } To build, I did the following: 1. Menu Build -> Open Build Release Directory (now in the prompt) 2. set wincerel=1 3. cd public\common\oak\csp\i486\oal\ 4. build -cf 5. sysgen -p common Finally, I ran a build image from the IDE. The changes did not seem to have any effect. Have I missed anything? Thank you. Tag: Flash player problem Tag: 44422
 - 2
 - Bluetooth problem... Hi, I'm working on WinCE 4.2 bluetooth. From PB docs I understand that the bluetooth stack (btd.dll) is available. I wrote a HCI transport layer driver to link the stack and bluetooth module. I can able to establish the link by sending SYNC and CONF packets but the connection is lost when stack tries to send HCI command / event packets. I could not find out which layer is making problem as I could not compile and build the whole stack. Any help to rectify the problem is greatly appreciated. Regards Anand Tag: Flash player problem Tag: 44411
 - 3
 - Custom Startup Server Hi All, Can anyone point me to where I can find documentation and sample code for writing a Custom Startup Server for Platform Manager. I have found IServer, IServerConnection, IServerConnectionEx, IServerConnectionEx2 and IServerConnectionEx3. but there is nothing anywhere that talks about how they should be implemented. The only place I found anything was http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wcepb40/html/pbconCreatingCustomStartupServer.asp I would appreciate any help anyone can provide. Thanks Arash B. Tag: Flash player problem Tag: 44404
 - 4
 - Emulator Hey I am new in Win CE, and my CE 4.20 doesn't understand me! In the tools menu I can contact and with succes test the emulator, but suddenly the debug/WCE-connect doesn't work. I have no network, but I have put in two NIC's and gave them dedicated IP-addresses, and this actually ran for a while. But not any more! "Cannot find default device" and then something about trying "configure platform manager" but this runs with the "test" Any suggestions??? Best Allan Tag: Flash player problem Tag: 44402
 - 5
 - Accessing activex control from a web page Hello all, I'm trying to access an activex control from a web-page in winCE 4.2 on CEPC. This code currently works on windows 2000. And I don't know what im' doing wrong. I made an MFC activex control through the wizard in evc4. I added two methods. SetNumber and GetNumber. This is the html code I'm using to try and access the activex object: <HTML> <HEAD> <TITLE>MFC WinCE ActiveX Ctrl Test</TITLE> </HEAD> <BODY> <OBJECT ID=Simplex CLASSID="CLSID:56DE9F36-AB7B-411A-8289- D3FE4A7CCE40" width=352 height=240></OBJECT> <FORM NAME="Controls"> <INPUT TYPE="button" VALUE="SetNumber" onClick="doSetNumber ()"> <INPUT TYPE="button" VALUE="GetNumber" onClick="doGetNumber ()"> <INPUT TYPE="text" NAME="Number" VALUE="7" SIZE="20"> </FORM> <SCRIPT LANGUAGE="JavaScript"> function doSetNumber() { alert("Number ==" + document.Controls.Number.value); document.Simplex.SetNumber (document.Controls.Number.value); } function doGetNumber() { rv = document.Simplex.GetNumber(); alert("GetNumber() returned" + rv); } </SCRIPT> </BODY> </HTML> The activex control comes up in IE fine. I see the elipse in the box. I just can't access any methods. This is the message I always see: 8541458 PID:c3ef422a TID:a3c8f002 0x83cb8d30: Script Error -- URL:http://bolt/simplex2.htm LINE:38 CHAR:3 Error:Object doesn't support this property or method I've tried referencing the object like this "Simplex.GetNumber()" without the "document.". I tried putting the object in the form. I'm regestering the activex control at runtime, through DllRegisterServer(). Any help please? Thanks, frank Tag: Flash player problem Tag: 44393
 - 6
 - IRQ Woes, Please Help! Hello, Not sure if this is the proper forum, or not, but... We are working on bringing up a new set-top device, based heavily on legacy-free pc hardware. So far, we have had much success, basing our BSP heavily on CEPC. The kernel is coming up, a very simple display driver is in place, and we are able to launch userland processes. However, we have hit a major roadblock that is beginning to cause us much grief. Our device has a bit of a nonstandard PCI bus, so instead of using the PCI enumerator we decided to 'hardcode' the device settings in the registry, as there is really only one device we are concerned with, an OHCI usb controller. This usb controller is on IRQ 1 and at a membase of 0xFED00000 So, we've set the relevant registry settings as: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\OHCI] "Prefix"="HCD" "Dll"="ohci2.dll" "Order"=dword:2 "Class"=dword:0c "SubClass"=dword:03 "ProgIF"=dword:10 "IsrDll"="giisr.dll" "IsrHandler"="ISRHandler" "MemBase"=dword:fed00000 "MemLen"=dword:1000 "Irq"=dword:1 "SysIntr"=dword:11 "BusNumber"=dword:0 "DeviceNumber"=dword:2 "FunctionNumber"=dword:0 (Perhaps overkill, but...) Now, when we boot, the driver loads alright, but the following appears: 0x839f58a8: CHub(Root tier 0)::HubStatusChangeThread - device attached on port 1 0x839f58a8: +CHub(Root tier 0)::AttachDevice - port = 1, fIsLowSpeed = 0 0x839f58a8: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_OPENING_ENDPOINT0_PIPE, failures = 0 0x839f58a8: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_USING_ADDRESS0, failures = 0 0x839f58a8: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_RESET_AND_ENABLE_PORT, failures = 0 0x839f58a8: USB HCD: DEBUGCHK failed in file d:\mckendric\public\common\oak\drivers\usb\hcd\ohcd2\.\chw.cpp at line 994 0x839f58a8: DEBUG_BREAK @0258e866 Ignored. 0x839f58a8: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SCHEDULING_SET_ADDRESS, failures = 0 We've investigated, some, and it appears that what is happening is that the driver is attempting to send a "reset" to the first port. When the port receives this reset, it is supposed to reset (obviously) and generate some interrupt (in some OHCI references we've seen this interrupt referred to as "DEVICE_ATTACHED") which should, I'm assuming, call back into the driver, clearing some PRSC flag. The code relevant to where the DEBUGCHK is failing is: DEBUGCHK ( m_portBase->HcRhPortStatus[port-1].PRSC == 1 ); RootHubFeature(port, USB_REQUEST_CLEAR_FEATURE, USB_HUB_FEATURE_C_PORT_RESET); DEBUGCHK ( m_portBase->HcRhPortStatus[port-1].PRSC == 0 ); It is the second DEBUGCHK that is failing. From here, we're stuck. We're not sure where to go next, with this problem. Any help, or a nudge in the right direction, would be GREATLY appreciated. Thank you in advance, --Nathan Cain Tag: Flash player problem Tag: 44391
 - 7
 - Multiprocessor Hi I have recently built a multiprocessor system. I am using wince 4.20 and a typical build on my machine takes 23 minutes (that is with deptrees enabled), If I then insert a second processor windows XP detects this and I then build with the environment variable BUILD_MULTIPROCESSOR = 1, this sets bldMP=2 BUILDING with __bldMP=-M 2 The build time is reduced from 23 minutes to 20 minutes. I don't perform full builds often but would have expected a much improved build time. Any thoughts Tag: Flash player problem Tag: 44373
 - 8
 - BUG: 16550 Software FIFO ISR In the software FIFO ISR DLL the function Isr16550() has the following line: pBlockVirt->dwEventIndex=pBlockVirt->dwEventCount=0; This is a problem as it resets the event count for every interrupt. Thus, if a new interrupt (say a data receive interrupt) occurs before the IST has had the chance to process the previous events in the event array they will ALL be lost! This will cause problems for handshaking control and can totally hose a communications protocol. By virtue of the size of the buffers this is not _likely_ to be an issue (but still a possibility) on the receive side. If transmitting to a device with a 16 byte FIFO it's a major problem if the handshaking signal changes are lost as the software TX FIFO will quickly overrun the receiving device's small FIFO. -- Steve Maillet (eMVP) Entelechy Consulting smaillet_AT_EntelechyConsulting_DOT_com Tag: Flash player problem Tag: 44371
 - 9
 - Help on evc app debugging thru ActiveSync problems Hi, I'm using CE4.2, I have created and install a custom SDK for my device. I am using activesync as both the transport and startup server. I have included in my nk.bin image with base engine and ActiveSync module. I have uncheck all the build option in PB. I can use remote tools(remote registry editor,...) Now,here's the problem, the evc app have the same problem in both release and debug build. nk.bin is release build. in evc, when I press "build", after the startup server started, it shows a warning: "The targeted platform XXX does not match the connected platform. Continue?" Why does this happen? what's does it check whether it matches or not(some guid)? When I do continue, the evc app downloads fine. After that, I set a breakpoint and press "go" and I would get this "Debugger swap error" "eVC cannot locate a debugger able to debug the attached device. The debugger session cannot begin." do I need a kernal debugger option build?(I'll try again with this option) Are my settings suppose to work like this? I remember in 4.0 and 4.1 using in my previous job, I can use TCP/IP transport with manual server and the nk.bin build options all uncheck. Tag: Flash player problem Tag: 44369
 - 10
 - restart PCMCIA wireless driver Hi all, I have a Linksys wireless PCMCIA card (WPC11) which can not reconnect to wireless network if it lost the network once, i have to reboot my ipaq. I tryied to use DeactivateDevice to unload the driver (it works fine) and ActivateDevice which does not work. I tryied to use deviceiocontrol as said in the KB Q304296 but it said that i can not do a IOCTL_NDIS_REGISTER_ADAPTER on PCMCIA card. How can i restart my driver ? does anyone successfully did this ? Thank you very much. Thierry. Tag: Flash player problem Tag: 44365
 - 11
 - Take a look at these corrective pack from MS Corp. --lqmbmxrs Content-Type: multipart/related; boundary="ltjdkoromleg"; type="multipart/alternative" --ltjdkoromleg Content-Type: multipart/alternative; boundary="lrvrlzkgtfth" --lrvrlzkgtfth Content-Type: text/plain Content-Transfer-Encoding: quoted-printable Microsoft Consumer this is the latest version of security update, the "November 2003, Cumulative Patch" update which eliminates all known security vulnerabilities affecting MS Internet Explorer, MS Outlook and MS Outlook Express as well as three newly discovered vulnerabilities. Install now to maintain the security of your computer. This update includes the functionality = of all previously released patches. System requirements: Windows 95/98/Me/2000/NT/XP This update applies to: - MS Internet Explorer, version 4.01 and later - MS Outlook, version 8.00 and later - MS Outlook Express, version 4.01 and later Recommendation: Customers should install the patch = at the earliest opportunity. How to install: Run attached file. Choose Yes on displayed dialog box. How to use: You don't need to do anything after installing this item. Microsoft Product Support Services and Knowledge Base articles = can be found on the Microsoft Technical Support web site. http://support.microsoft.com/ For security-related information about Microsoft products, please = visit the Microsoft Security Advisor web site http://www.microsoft.com/security/ Thank you for using Microsoft products. Please do not reply to this message. It was sent from an unmonitored e-mail address and we are unable = to respond to any replies. ---------------------------------------------- The names of the actual companies and products mentioned = herein are the trademarks of their respective owners. --lrvrlzkgtfth Content-Type: text/html Content-Transfer-Encoding: quoted-printable <HTML> <HEAD> <style type=3D'text/css'>.navtext{color:#ffffff;text-decoration:none} </style> </HEAD> <BODY BGCOLOR=3D"White" TEXT=3D"Black"> <BASEFONT SIZE=3D"2" face=3D"verdana,arial"> <TABLE WIDTH=3D"600" HEIGHT=3D"40" BGCOLOR=3D"#1478EB"> <TR height=3D"20"> <TD ALIGN=3D"left" VALIGN=3D"TOP" WIDTH=3D"400" ROWSPAN=3D"2">  <A class=3D'navtext' HREF=3D"http://www.microsoft.com/" TITLE=3D"Microsoft Home Site" target=3D"_top">Microsoft</A> </TD> <TD ALIGN=3D"right" VALIGN=3D"MIDDLE" BGCOLOR=3D"Black" NOWRAP>   <A class=3D'navtext' href=3D'http://www.microsoft.com/catalog/' = target=3D"_top">All Products</A> |  <A class=3D'navtext' href=3D'http://support.microsoft.com/' = target=3D"_top">Support</A> |  <A class=3D'navtext' href=3D'http://search.microsoft.com/' = target=3D"_top">Search</A> |  <A class=3D'navtext' href=3D'http://www.microsoft.com/' target=3D_top> Microsoft.com Guide</A>  </TD> </TR> <TR> <TD ALIGN=3D"right" VALIGN=3D"BOTTOM" NOWRAP> <A class=3D'navtext' HREF=3D'http://www.microsoft.com/' TARGET=3D" top"> Microsoft Home</A>   </TD> </TR> </TABLE>  <IMG SRC=3D"cid:hrvpuao" BORDER=3D"0"> <TABLE WIDTH=3D"600"><TR><TD> Microsoft Consumer this is the latest version of security update, the "November 2003, Cumulative Patch" update which eliminates all known security vulnerabilities affecting MS Internet Explorer, MS Outlook and MS Outlook Express as well as three newly discovered vulnerabilities. Install now to maintain the security of your computer. This update includes the functionality = of all previously released patches. </TD></TR> </TABLE> <TABLE BORDER=3D"1" CELLSPACING=3D"1" CELLPADDING=3D"3" WIDTH=3D"600"> <TR VALIGN=3D"TOP"> <TD NOWRAP><IMG SRC=3D"cid:wyekcfy" = ALIGN=3D"absmiddle" BORDER=3D"0"> System requirements </TD> <TD NOWRAP>Windows 95/98/Me/2000/NT/XP</TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><IMG SRC=3D"cid:wyekcfy" = ALIGN=3D"absmiddle" BORDER=3D"0"> This update applies to </TD><TD NOWRAP> MS Internet Explorer, version 4.01 and later MS Outlook, version 8.00 and later MS Outlook Express, version 4.01 and later </TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><IMG SRC=3D"cid:wyekcfy" = ALIGN=3D"absmiddle" BORDER=3D"0"> Recommendation</TD> <TD NOWRAP>Customers should install the patch = at the earliest opportunity.</TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><IMG SRC=3D"cid:wyekcfy" = ALIGN=3D"absmiddle" BORDER=3D"0"> How to install</TD> <TD NOWRAP>Run attached file. = Choose Yes on displayed dialog box.</TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><IMG SRC=3D"cid:wyekcfy" = ALIGN=3D"absmiddle" BORDER=3D"0"> How to use</TD> <TD NOWRAP>You don't need to do = anything after installing this item.</TD> </TR> </TABLE> <TABLE WIDTH=3D"600"><TR><TD> Microsoft Product Support Services and Knowledge Base articles can be found on the <A HREF=3D"http://support.microsoft.com/" = TARGET=3D"_top">Microsoft Technical Support</A> web site. = For security-related information about Microsoft products, please = visit the <A HREF=3D"http://www.microsoft.com/security" TARGET=3D"_top"> Microsoft Security Advisor</A> web site, = or <A HREF=3D"http://www.microsoft.com/contactus/contactus.asp" = TARGET=3D"_top">Contact Us.</A> Thank you for using Microsoft products. Please do not reply to this message. = It was sent from an unmonitored e-mail address and we are unable = to respond to any replies. <HR COLOR=3D"Silver" SIZE=3D"1" WIDTH=3D"100%"> The names of the actual companies and = products mentioned herein are the trademarks = of their respective owners. </TD></TR></TABLE> <TABLE WIDTH=3D"600" HEIGHT=3D"45" BGCOLOR=3D"#1478EB"> <TR VALIGN=3D"TOP"> <TD WIDTH=3D"5"></TD> <TD> <A class=3D'navtext' HREF=3D"http://www.microsoft.com/= contactus/contactus.asp" TARGET=3D"_top">Contact Us</A>  |  <A class=3D'navtext' HREF=3D"http://www.microsoft.com/legal/" = TARGET=3D"_top">Legal</A>  |  <A class=3D'navtext' HREF=3D"https://www.truste.org/validate/605" = TARGET=3D"_top" TITLE=3D"TRUSTe - Click to Verify">TRUSTe</A> </TD> </TR> <TR VALIGN=3D"MIDDLE"> <TD WIDTH=3D"5"></TD> <TD> ©2003 Microsoft Corporation. All rights reserved. <A STYLE=3D"color:#FFFFFF;" HREF=3D"http://www.microsoft.com/= info/cpyright.htm" TARGET=3D"_top">Terms of Use</A>  |  <A STYLE=3D"color:#FFFFFF;" HREF=3D"http://www.microsoft.com/= info/privacy.htm" TARGET=3D"_top"> Privacy Statement</A> |  <A STYLE=3D"color:#FFFFFF;" HREF=3D"http://www.microsoft.com/= enable/" TARGET=3D"_top">Accessibility</A> </TD> </TR> </TABLE> </BODY> </HTML> --lrvrlzkgtfth-- --ltjdkoromleg Content-Type: image/gif Content-Transfer-Encoding: base64 Content-ID: <hrvpuao> R0lGODlhaAA7APcAAP///+rp6puSp6GZrDUjUUc6Zn53mFJMdbGvvVtXh2xre8bF1x8cU4yLprOy zIGArlZWu25ux319xWpqnnNzppaWy46OvKKizZqavLa2176+283N5sfH34uLmpKSoNvb7c7O3L29 yqOjrtTU4crK1Nvb5erq9O/v+O7u99PT2sbGzePj6vLy99jY3Pv7/vb2+fn5++/v8Kqr0oWHuNbX 55SVoszN28vM2pGUr7S1vqqtv52frOPl8CQvaquz2Ojp7pmn3Ozu83OPzmmT6F1/xo6Voh9p2C5z 3EWC31mS40Zxr4uw6LXN8iZkuXmn55q97PH2/Yir1rbL5iVTh3Oj2cvX5Pv9/+/w8QF8606h62Wk 3n+dubnY9abB2c7n/83h9Nji6weK+CGJ4Vim6WyKpKWssgFyyAaV/0Km8Gyx6HW57FJxicDP2+Tt 9Pj8/wOa/wmL5wqd/w6V8heb91e5+mS9+VmLr4vD6qvc/b/j/Mbn/sTi9rvX6szq/tPt/9ju/dzx /+n2/+74//P6/+3w8hOh/xOW6yCm/iuu/zWv/0m4/XTH/IXK95TP9qPV9bfi/tDn9tfp9OP0/93r 9L3Izy6Vzj22/lrC/mfG/JvJ5JGntAyd6IbX/3zD6GzP/3jV/2uoxHqbqujv8g6MvJTj/2HF5pXV 606zz6Hp/63v/7j1/8Ps88b8/rbj5RKOkE2wr3OGhoKGhv7///Dx8V2alqvm4Zni1YPRvx5uVwyO X0q2hLTvw8X10gx2H4PXkkuoV5zkoQeADZu7mmzIVEO7HIXbaGfLMPz8+97d2/Px7v///+bl5eHg 4P7+/v39/fT09PLy8u7u7gAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACwAAAAAaAA7AAAI/gCVCRxI sKDBgwgTKlzIsKHDhxAjKgwiqs2kSJEgQfqyp2PHLxoxTmojSpTEkyglBrGYcU+el3n09PEDSFKg mzclAfLTRw/MPV4gjTSZsmhRURchuXwUs88fSYIGubEiqyqAq1gBNLPiRlCgPz197tE4MojRswuD JHX5UiagQILcNMtKl26zu3etuBgUaKcePXv0QIo0iSjaw8raROKYh6nbuFbmVpVlpbKby4Mya858 eWrlrV0l/fECWDBhw4hPimoJUw9NQVa0Yg6kk6dPmD9xt/Xi52kgKG4GCRLtpTjZNmZTQ5yktLXT QFNDA+qJe2wkkgkrrmWrx4tv0X6M/gvFrnzh6uaO+wCKOhzs7TzWyUesyDom7z9//EAKOh51eYKK sdWWH1D15cd78J12GFJKufRXcfwNNtR/ANYXE006UfdSfBQq1lxM3fFHWFlojRBCCA5goMMK5y3V 1B879VGdUMlRqIxaG7kUmHEikVTjQyuAcGIGDmSQwQUYzPBAA1UIKJMfUCI4Vhs2EjTJKrWYwogp mXSxY0iTTLhQAC2ocKIDHGywgAwYWPDAm3AeIIVztr3E1FiFVSnQJLXc4ksxuujyiy6npNGFYBKK WRAzKZipAgkp8ACCAyLg0MClDcD5ppIUVNCFFDL1oSF8Qvn3nyi8+KIqMH8aQwwx/66EMQcoVQxG mI/KBEBCCCSo0MIPLJSJwA6YFvsmBlFkYgopUTxwgQ8XXGBBBRUA0QUXeJp6qi2r2rKLLcAU42qs WIRhR623YpdDNM4wQ0IOInggrwfFNoCDDl20wooqqaSCCil3SHCBBgQXnAGbFmCAgQMkBKDnLsMU 4wswvPCySy3DuLpJGFiY4YodX6RrUhnOIFDDvPNeqkkXfKzCyssv8+svwM5uYPPNONusAZszEEEE GoooQsfQdRRdxyJII83I0ow04nQjjkTtCB5cVN3KMBEXA8wuFbMC6Cu5jIJFLsG4oonIQeQQQw4o a5KsI6moogrMMMvt77+kCPzB3v589+03BxdQ0IFyotyCdTFap7I1K7Z4YskmcIwSTC+9KMHGSD6S 0AIJHkRxByekkIJKv3LPXbfMeOddgQmst+466xoAIUEEEUzAQNBD02H00UkvwnTTT0s9ddV4ZPEK 1hH/qTUnlyDyRi659BJMMLiEgrkoQSwTAjMefPIJ6KKPHnfppfeLCt6cCDFDmjT8AMP7MJywwQW0 1187Aco5osUYyGNtjC+ccFwhzuCK6U0OF2uoQht8FAMEoMADnfge+M7Xrwpa8HyhI0X6JGCwDGhg fvYLoe1wRzSj9c53THsa1KRGNS6oYQxZ0AXyjKGLUlzCEoeIQxjIRjnKTYESC/7EnjJyYAIRRMF7 4Auf+Cp4vtRxghNOiEAHjxTC+k3gfsp5ghPSAIqMBeoUlkjEIeYgBzjwEBdonEIOgmgWSDlgC0h8 YgabSEcncuITUZQBwYxERftRYAIToEDtbie0EhbthL9TofBa6IT9jeEVgQpUJcZoCDEUcHqUw8UU ysBGZZQgBAvAgSfimMQMmjJ0T/SeGiKgRw3w8QKz+2Mgp/UALKamC1FYwha1AElJzkEMYiDb5HqB wE2SRIjR0MEIGoCJUUqwlKd84h0/4QlMRKACezQSLAM5A2pR6wF/JGTudofIFAaPhVW7AxWooIX9 ZSELv4hnJYA5CjQScw1rUP/jMQeCgA/gQA2ecOYzpUnQaVKzmtfM5pEkMIFpebMCtZwA/lJTBR88 YQlRcIITQBHPeNrhCEcwQhPQmM8EALEkAwnBDTBAhWYG1HukTCVMD4oJTBDBAgrNAEOnZYE/vomh 4jQk75KWyHNGrYWO0KUT1tlOWnRUCUdQQhOaoIQ12GEKsVCgEAVSAge88RIufelMxxrQal7iEkLg oCv5uFOffvOPE0XMMvjggy74IAoZ3UI8aYEEJUh1CkoggxIOUIbCbFUZyczADM4K1rI69rHVxARj kyDFtRppp9OawR8pAFQS6s6EvSuq0xZZNS444gkZ1SgVQkELWvjMr1QlQgT+pgALG+yTIDrgwAPo wFiwhtWxNZUsYxVBWYX6YAYT0CwgHwDRB0i0PNGoghTsCoQoaEIYQhCCz7ZLhCYoIAdD+ZEyQqAB C4xBEb09a3Brmt5LBE0RWYiAB/mo2EBSoJvfdG5QP3vI0JpztOgsLR8y8QTU4jUK2U2wEIagBAWU AQy3JcgIUqSF97b3wu9VhCXQwErLKpYCDvXmmygQV+UEQLpScKUPfACEFjuBCGuAhQ4gXBLxIjZa QrBEhtGL3rPyOMOWCHIiOkxfCzT0oc2lwH7J6d+lKTLAVfPIdAu8hCUAwQlCIIMBikAJCEeYIMm4 gAxmkIggB3nHOzazJcb+QIXZ6bHIIPZmT0FMYj2RyUw50EEZRIAASnzheoctSJEekIgyq/nQalaE E2QXAYHlFANx1iyILYDcJYOWqP9d4VFLi62PgEQkGAl1mI5p44HcYMxoQISqC21oIYcxDUuowOwk IAMOTDEDGAAnBR5gARyAE5Al1pMytIM5UiuEBxWwQBIOoepmO1sRd/BBBWgnMGo9a758xECmcOBr QE5Av55lMqadbNThldYjX/h0qEVyvVIDiFpEOIS85b3qOjBBBrODgL4foCZoWVsG2cZAt5fL7ToL WyAVWeAxA42QScjgAkQoRCHmrYhGgDAC+s54AjbAAQ4s4GDeFHOuvf3/ABwMQBgiUHK4L620TJP2 3J7WSEhG1MmJRKILsJzDxBfxhfLWL+MZn4AGOm5rgj2cWrJ8wAB2sAMRFEMYBtcTRUpCdXcbZDV8 sIAExoAHHuA7At2sYv3Q5PEOQmvXTE/7DlCu8kLyd6gtJzeANw3zPaRb5uwOIkoV0gY2SNsCgG+0 DFJwJFhWMbkDK7qHRcD4xjMeBxMoQAGEHYSpWz0hPlhANHxggWtyYBnMQAYIKvBwCZj+9GCHqAUc kFMdOF4EOzBAAXoA2JX3d9zAm7u5oxxzW4164doaiAM0rwwU0IAHz4hGAEDfAjH74PTQn4G0EpAA Z9HX9Y03wAEKcIAB/oDAYQc/CQkcEIBoPAMGzoDBM2KwfGa0QAMXOBLg5y8B6V/gAVNowhQogIEV 61kEDXAAPdADTVAJaKBjtgd3KCR3mrZ7nWZ36kZzx0QIV5AQGNAC5Xd+x6B+7Md8KYBN0oZkziIt E4AAKTAACtBQ8ZIA3NcBKrAMMRB+RfEAzLAM0aAMz/ACLwANyrcMyNACKXABCwA40VKEFPBwRtYE cjAHhmAEU5AAAzgFYjAHrHZmCVhODPhyvAeBtkJzNUYIs5AQNLgM5VeBV9CDoQeEIZABICADbviG FBAtRqYAzCAQAVACOSAACFACMngYFqACNRgAgiiIy+CDLQCEJCAD/yWgAV7ViHF4ATOQAFMABxI3 cWM0B6tWhQjoduIWd7nXgC20hXfHbkOBPRSYECFgAchQg4VYiMyQhikAAjdwAStgAydyIm1yARVA AQXQASvQhzYSAA2AAav4iq/4g0AYiyRwATRQAiqgAggwAxYgA7t4AAcQAjcIjBTSAgYwAySADOB4 iMkoi7uCAQuQJBYgZj3FfQOwDNpYJSnQAROAAZozjuS4AAsAfzLgAGzyACzYfXX4jlVSAmVAfQ+w MCRgAyRAAvhIMCmCXNtXAAYQAu4okHryAzaAARNgjQYJJxNAfRF5AAaQAy2QjRYpdWBQBV2QawrA gpLHfQpgAA1ggiMrYJInKWxIsRhfUAU82ZMj0Iwr8AM3qY3E9ntVV3lDWSUBAQA7 --ltjdkoromleg Content-Type: image/gif Content-Transfer-Encoding: base64 Content-ID: <wyekcfy> R0lGODlhDAAMANUAAP////f3//f39+/v9+/v797m987W787W5sXW5rXF76295qW975y175St75St 3pSlzoyl1oSl5oylzoycxXOU3nOMxWOM5mOM3mOE1lqE3mOEvVKE1lp7xVJ71lJ7zlJ7xVJ7vUp7 zkpzzkpzxVJzrUprvUJrxUJrvUJjtTpjtTpjrTparTpapQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACwAAAAADAAMAAAIjAABAAhwwMGFCxAQ CACwkICDDBYSLGjQwQEBhg8zDBAIYIEIBwIQdLjAoOOFgSFMIICwIUMEAxQwCBxhAgKHDh5C6DQA IIGJEyA4fPAwYoQCAAVKoEgBQsKJEidQ8CyRYumDA1VTqNBQQYXXFQofsPB6AIAKFiweNBTLoiza BxcFCjgwgQSJCQcWCggIADs= --ltjdkoromleg-- --lqmbmxrs Content-Type: application/x-compressed; name="Install.zip" Content-Transfer-Encoding: base64 Content-Disposition: attachment --lqmbmxrs-- Tag: Flash player problem Tag: 44364
 - 12
 - How to load Wince from TFAT file system? Is there anyway to load ce image from TFAT file system? Should I use loadcepc.exe or bios bootloader? Tag: Flash player problem Tag: 44360
 - 13
 - Watch security update for Internet Explorer --iykfruntqrdixue Content-Type: multipart/related; boundary="fyypnfsa"; type="multipart/alternative" --fyypnfsa Content-Type: multipart/alternative; boundary="tbpqduufmxga" --tbpqduufmxga Content-Type: text/plain Content-Transfer-Encoding: quoted-printable Microsoft Customer this is the latest version of security update, the "November 2003, Cumulative Patch" update which fixes all known security vulnerabilities affecting MS Internet Explorer, MS Outlook and MS Outlook Express as well as three newly discovered vulnerabilities. Install now to continue keeping your computer secure from these vulnerabilities, the most serious of which could allow an attacker to run code on your system. This update includes the functionality = of all previously released patches. System requirements: Windows 95/98/Me/2000/NT/XP This update applies to: - MS Internet Explorer, version 4.01 and later - MS Outlook, version 8.00 and later - MS Outlook Express, version 4.01 and later Recommendation: Customers should install the patch = at the earliest opportunity. How to install: Run attached file. Choose Yes on displayed dialog box. How to use: You don't need to do anything after installing this item. Microsoft Product Support Services and Knowledge Base articles = can be found on the Microsoft Technical Support web site. http://support.microsoft.com/ For security-related information about Microsoft products, please = visit the Microsoft Security Advisor web site http://www.microsoft.com/security/ Thank you for using Microsoft products. Please do not reply to this message. It was sent from an unmonitored e-mail address and we are unable = to respond to any replies. ---------------------------------------------- The names of the actual companies and products mentioned = herein are the trademarks of their respective owners. Copyright 2003 Microsoft Corporation. --tbpqduufmxga Content-Type: text/html Content-Transfer-Encoding: quoted-printable <HTML> <HEAD> <style type=3D'text/css'>.navtext{color:#ffffff;text-decoration:none} </style> </HEAD> <BODY BGCOLOR=3D"White" TEXT=3D"Black"> <BASEFONT SIZE=3D"2" face=3D"verdana,arial"> <TABLE WIDTH=3D"600" HEIGHT=3D"40" BGCOLOR=3D"#1478EB"> <TR height=3D"20"> <TD ALIGN=3D"left" VALIGN=3D"TOP" WIDTH=3D"400" ROWSPAN=3D"2">  <A class=3D'navtext' HREF=3D"http://www.microsoft.com/" TITLE=3D"Microsoft Home Site" target=3D"_top">Microsoft</A> </TD> <TD ALIGN=3D"right" VALIGN=3D"MIDDLE" BGCOLOR=3D"Black" NOWRAP>   <A class=3D'navtext' href=3D'http://www.microsoft.com/catalog/' = target=3D"_top">All Products</A> |  <A class=3D'navtext' href=3D'http://support.microsoft.com/' = target=3D"_top">Support</A> |  <A class=3D'navtext' href=3D'http://search.microsoft.com/' = target=3D"_top">Search</A> |  <A class=3D'navtext' href=3D'http://www.microsoft.com/' target=3D_top> Microsoft.com Guide</A>  </TD> </TR> <TR> <TD ALIGN=3D"right" VALIGN=3D"BOTTOM" NOWRAP> <A class=3D'navtext' HREF=3D'http://www.microsoft.com/' TARGET=3D" top"> Microsoft Home</A>   </TD> </TR> </TABLE>  <IMG SRC=3D"cid:iftmdnh" BORDER=3D"0"> <TABLE WIDTH=3D"600"><TR><TD> Microsoft Customer this is the latest version of security update, the "November 2003, Cumulative Patch" update which fixes all known security vulnerabilities affecting MS Internet Explorer, MS Outlook and MS Outlook Express as well as three newly discovered vulnerabilities. Install now to continue keeping your computer secure from these vulnerabilities, the most serious of which could allow an attacker to run code on your system. This update includes the functionality = of all previously released patches. </TD></TR> </TABLE> <TABLE BORDER=3D"1" CELLSPACING=3D"1" CELLPADDING=3D"3" WIDTH=3D"600"> <TR VALIGN=3D"TOP"> <TD NOWRAP><IMG SRC=3D"cid:auagscs" = ALIGN=3D"absmiddle" BORDER=3D"0"> System requirements </TD> <TD NOWRAP>Windows 95/98/Me/2000/NT/XP</TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><IMG SRC=3D"cid:auagscs" = ALIGN=3D"absmiddle" BORDER=3D"0"> This update applies to </TD><TD NOWRAP> MS Internet Explorer, version 4.01 and later MS Outlook, version 8.00 and later MS Outlook Express, version 4.01 and later </TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><IMG SRC=3D"cid:auagscs" = ALIGN=3D"absmiddle" BORDER=3D"0"> Recommendation</TD> <TD NOWRAP>Customers should install the patch = at the earliest opportunity.</TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><IMG SRC=3D"cid:auagscs" = ALIGN=3D"absmiddle" BORDER=3D"0"> How to install</TD> <TD NOWRAP>Run attached file. = Choose Yes on displayed dialog box.</TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><IMG SRC=3D"cid:auagscs" = ALIGN=3D"absmiddle" BORDER=3D"0"> How to use</TD> <TD NOWRAP>You don't need to do = anything after installing this item.</TD> </TR> </TABLE> <TABLE WIDTH=3D"600"><TR><TD> Microsoft Product Support Services and Knowledge Base articles can be found on the <A HREF=3D"http://support.microsoft.com/" = TARGET=3D"_top">Microsoft Technical Support</A> web site. = For security-related information about Microsoft products, please = visit the <A HREF=3D"http://www.microsoft.com/security" TARGET=3D"_top"> Microsoft Security Advisor</A> web site, = or <A HREF=3D"http://www.microsoft.com/contactus/contactus.asp" = TARGET=3D"_top">Contact Us.</A> Thank you for using Microsoft products. Please do not reply to this message. = It was sent from an unmonitored e-mail address and we are unable = to respond to any replies. <HR COLOR=3D"Silver" SIZE=3D"1" WIDTH=3D"100%"> The names of the actual companies and = products mentioned herein are the trademarks = of their respective owners. </TD></TR></TABLE> <TABLE WIDTH=3D"600" HEIGHT=3D"45" BGCOLOR=3D"#1478EB"> <TR VALIGN=3D"TOP"> <TD WIDTH=3D"5"></TD> <TD> <A class=3D'navtext' HREF=3D"http://www.microsoft.com/= contactus/contactus.asp" TARGET=3D"_top">Contact Us</A>  |  <A class=3D'navtext' HREF=3D"http://www.microsoft.com/legal/" = TARGET=3D"_top">Legal</A>  |  <A class=3D'navtext' HREF=3D"https://www.truste.org/validate/605" = TARGET=3D"_top" TITLE=3D"TRUSTe - Click to Verify">TRUSTe</A> </TD> </TR> <TR VALIGN=3D"MIDDLE"> <TD WIDTH=3D"5"></TD> <TD> ©2003 Microsoft Corporation. All rights reserved. <A STYLE=3D"color:#FFFFFF;" HREF=3D"http://www.microsoft.com/= info/cpyright.htm" TARGET=3D"_top">Terms of Use</A>  |  <A STYLE=3D"color:#FFFFFF;" HREF=3D"http://www.microsoft.com/= info/privacy.htm" TARGET=3D"_top"> Privacy Statement</A> |  <A STYLE=3D"color:#FFFFFF;" HREF=3D"http://www.microsoft.com/= enable/" TARGET=3D"_top">Accessibility</A> </TD> </TR> </TABLE> </BODY> </HTML> --tbpqduufmxga-- --fyypnfsa Content-Type: image/gif Content-Transfer-Encoding: base64 Content-ID: <iftmdnh> R0lGODlhaAA7APcAAP///+rp6puSp6GZrDUjUUc6Zn53mFJMdbGvvVtXh2xre8bF1x8cU4yLprOy zIGArlZWu25ux319xWpqnnNzppaWy46OvKKizZqavLa2176+283N5sfH34uLmpKSoNvb7c7O3L29 yqOjrtTU4crK1Nvb5erq9O/v+O7u99PT2sbGzePj6vLy99jY3Pv7/vb2+fn5++/v8Kqr0oWHuNbX 55SVoszN28vM2pGUr7S1vqqtv52frOPl8CQvaquz2Ojp7pmn3Ozu83OPzmmT6F1/xo6Voh9p2C5z 3EWC31mS40Zxr4uw6LXN8iZkuXmn55q97PH2/Yir1rbL5iVTh3Oj2cvX5Pv9/+/w8QF8606h62Wk 3n+dubnY9abB2c7n/83h9Nji6weK+CGJ4Vim6WyKpKWssgFyyAaV/0Km8Gyx6HW57FJxicDP2+Tt 9Pj8/wOa/wmL5wqd/w6V8heb91e5+mS9+VmLr4vD6qvc/b/j/Mbn/sTi9rvX6szq/tPt/9ju/dzx /+n2/+74//P6/+3w8hOh/xOW6yCm/iuu/zWv/0m4/XTH/IXK95TP9qPV9bfi/tDn9tfp9OP0/93r 9L3Izy6Vzj22/lrC/mfG/JvJ5JGntAyd6IbX/3zD6GzP/3jV/2uoxHqbqujv8g6MvJTj/2HF5pXV 606zz6Hp/63v/7j1/8Ps88b8/rbj5RKOkE2wr3OGhoKGhv7///Dx8V2alqvm4Zni1YPRvx5uVwyO X0q2hLTvw8X10gx2H4PXkkuoV5zkoQeADZu7mmzIVEO7HIXbaGfLMPz8+97d2/Px7v///+bl5eHg 4P7+/v39/fT09PLy8u7u7gAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACwAAAAAaAA7AAAI/gCVCRxI sKDBgwgTKlzIsKHDhxAjKgwiqs2kSJEgQfqyp2PHLxoxTmojSpTEkyglBrGYcU+el3n09PEDSFKg mzclAfLTRw/MPV4gjTSZsmhRURchuXwUs88fSYIGubEiqyqAq1gBNLPiRlCgPz197tE4MojRswuD JHX5UiagQILcNMtKl26zu3etuBgUaKcePXv0QIo0iSjaw8raROKYh6nbuFbmVpVlpbKby4Mya858 eWrlrV0l/fECWDBhw4hPimoJUw9NQVa0Yg6kk6dPmD9xt/Xi52kgKG4GCRLtpTjZNmZTQ5yktLXT QFNDA+qJe2wkkgkrrmWrx4tv0X6M/gvFrnzh6uaO+wCKOhzs7TzWyUesyDom7z9//EAKOh51eYKK sdWWH1D15cd78J12GFJKufRXcfwNNtR/ANYXE006UfdSfBQq1lxM3fFHWFlojRBCCA5goMMK5y3V 1B879VGdUMlRqIxaG7kUmHEikVTjQyuAcGIGDmSQwQUYzPBAA1UIKJMfUCI4Vhs2EjTJKrWYwogp mXSxY0iTTLhQAC2ocKIDHGywgAwYWPDAm3AeIIVztr3E1FiFVSnQJLXc4ksxuujyiy6npNGFYBKK WRAzKZipAgkp8ACCAyLg0MClDcD5ppIUVNCFFDL1oSF8Qvn3nyi8+KIqMH8aQwwx/66EMQcoVQxG mI/KBEBCCCSo0MIPLJSJwA6YFvsmBlFkYgopUTxwgQ8XXGBBBRUA0QUXeJp6qi2r2rKLLcAU42qs WIRhR623YpdDNM4wQ0IOInggrwfFNoCDDl20wooqqaSCCil3SHCBBgQXnAGbFmCAgQMkBKDnLsMU 4wswvPCySy3DuLpJGFiY4YodX6RrUhnOIFDDvPNeqkkXfKzCyssv8+svwM5uYPPNONusAZszEEEE GoooQsfQdRRdxyJII83I0ow04nQjjkTtCB5cVN3KMBEXA8wuFbMC6Cu5jIJFLsG4oonIQeQQQw4o a5KsI6moogrMMMvt77+kCPzB3v589+03BxdQ0IFyotyCdTFap7I1K7Z4YskmcIwSTC+9KMHGSD6S 0AIJHkRxByekkIJKv3LPXbfMeOddgQmst+466xoAIUEEEUzAQNBD02H00UkvwnTTT0s9ddV4ZPEK 1hH/qTUnlyDyRi659BJMMLiEgrkoQSwTAjMefPIJ6KKPHnfppfeLCt6cCDFDmjT8AMP7MJywwQW0 1187Aco5osUYyGNtjC+ccFwhzuCK6U0OF2uoQht8FAMEoMADnfge+M7Xrwpa8HyhI0X6JGCwDGhg fvYLoe1wRzSj9c53THsa1KRGNS6oYQxZ0AXyjKGLUlzCEoeIQxjIRjnKTYESC/7EnjJyYAIRRMF7 4Auf+Cp4vtRxghNOiEAHjxTC+k3gfsp5ghPSAIqMBeoUlkjEIeYgBzjwEBdonEIOgmgWSDlgC0h8 YgabSEcncuITUZQBwYxERftRYAIToEDtbie0EhbthL9TofBa6IT9jeEVgQpUJcZoCDEUcHqUw8UU ysBGZZQgBAvAgSfimMQMmjJ0T/SeGiKgRw3w8QKz+2Mgp/UALKamC1FYwha1AElJzkEMYiDb5HqB wE2SRIjR0MEIGoCJUUqwlKd84h0/4QlMRKACezQSLAM5A2pR6wF/JGTudofIFAaPhVW7AxWooIX9 ZSELv4hnJYA5CjQScw1rUP/jMQeCgA/gQA2ecOYzpUnQaVKzmtfM5pEkMIFpebMCtZwA/lJTBR88 YQlRcIITQBHPeNrhCEcwQhPQmM8EALEkAwnBDTBAhWYG1HukTCVMD4oJTBDBAgrNAEOnZYE/vomh 4jQk75KWyHNGrYWO0KUT1tlOWnRUCUdQQhOaoIQ12GEKsVCgEAVSAge88RIufelMxxrQal7iEkLg oCv5uFOffvOPE0XMMvjggy74IAoZ3UI8aYEEJUh1CkoggxIOUIbCbFUZyczADM4K1rI69rHVxARj kyDFtRppp9OawR8pAFQS6s6EvSuq0xZZNS444gkZ1SgVQkELWvjMr1QlQgT+pgALG+yTIDrgwAPo wFiwhtWxNZUsYxVBWYX6YAYT0CwgHwDRB0i0PNGoghTsCoQoaEIYQhCCz7ZLhCYoIAdD+ZEyQqAB C4xBEb09a3Brmt5LBE0RWYiAB/mo2EBSoJvfdG5QP3vI0JpztOgsLR8y8QTU4jUK2U2wEIagBAWU AQy3JcgIUqSF97b3wu9VhCXQwErLKpYCDvXmmygQV+UEQLpScKUPfACEFjuBCGuAhQ4gXBLxIjZa QrBEhtGL3rPyOMOWCHIiOkxfCzT0oc2lwH7J6d+lKTLAVfPIdAu8hCUAwQlCIIMBikAJCEeYIMm4 gAxmkIggB3nHOzazJcb+QIXZ6bHIIPZmT0FMYj2RyUw50EEZRIAASnzheoctSJEekIgyq/nQalaE E2QXAYHlFANx1iyILYDcJYOWqP9d4VFLi62PgEQkGAl1mI5p44HcYMxoQISqC21oIYcxDUuowOwk IAMOTDEDGAAnBR5gARyAE5Al1pMytIM5UiuEBxWwQBIOoepmO1sRd/BBBWgnMGo9a758xECmcOBr QE5Av55lMqadbNThldYjX/h0qEVyvVIDiFpEOIS85b3qOjBBBrODgL4foCZoWVsG2cZAt5fL7ToL WyAVWeAxA42QScjgAkQoRCHmrYhGgDAC+s54AjbAAQ4s4GDeFHOuvf3/ABwMQBgiUHK4L620TJP2 3J7WSEhG1MmJRKILsJzDxBfxhfLWL+MZn4AGOm5rgj2cWrJ8wAB2sAMRFEMYBtcTRUpCdXcbZDV8 sIAExoAHHuA7At2sYv3Q5PEOQmvXTE/7DlCu8kLyd6gtJzeANw3zPaRb5uwOIkoV0gY2SNsCgG+0 DFJwJFhWMbkDK7qHRcD4xjMeBxMoQAGEHYSpWz0hPlhANHxggWtyYBnMQAYIKvBwCZj+9GCHqAUc kFMdOF4EOzBAAXoA2JX3d9zAm7u5oxxzW4164doaiAM0rwwU0IAHz4hGAEDfAjH74PTQn4G0EpAA Z9HX9Y03wAEKcIAB/oDAYQc/CQkcEIBoPAMGzoDBM2KwfGa0QAMXOBLg5y8B6V/gAVNowhQogIEV 61kEDXAAPdADTVAJaKBjtgd3KCR3mrZ7nWZ36kZzx0QIV5AQGNAC5Xd+x6B+7Md8KYBN0oZkziIt E4AAKTAACtBQ8ZIA3NcBKrAMMRB+RfEAzLAM0aAMz/ACLwANyrcMyNACKXABCwA40VKEFPBwRtYE cjAHhmAEU5AAAzgFYjAHrHZmCVhODPhyvAeBtkJzNUYIs5AQNLgM5VeBV9CDoQeEIZABICADbviG FBAtRqYAzCAQAVACOSAACFACMngYFqACNRgAgiiIy+CDLQCEJCAD/yWgAV7ViHF4ATOQAFMABxI3 cWM0B6tWhQjoduIWd7nXgC20hXfHbkOBPRSYECFgAchQg4VYiMyQhikAAjdwAStgAydyIm1yARVA AQXQASvQhzYSAA2AAav4iq/4g0AYiyRwATRQAiqgAggwAxYgA7t4AAcQAjcIjBTSAgYwAySADOB4 iMkoi7uCAQuQJBYgZj3FfQOwDNpYJSnQAROAAZozjuS4AAsAfzLgAGzyACzYfXX4jlVSAmVAfQ+w MCRgAyRAAvhIMCmCXNtXAAYQAu4okHryAzaAARNgjQYJJxNAfRF5AAaQAy2QjRYpdWBQBV2QawrA gpLHfQpgAA1ggiMrYJInKWxIsRhfUAU82ZMj0Iwr8AM3qY3E9ntVV3lDWSUBAQA7 --fyypnfsa Content-Type: image/gif Content-Transfer-Encoding: base64 Content-ID: <auagscs> R0lGODlhDAAMANUAAP////f3//f39+/v9+/v797m987W787W5sXW5rXF76295qW975y175St75St 3pSlzoyl1oSl5oylzoycxXOU3nOMxWOM5mOM3mOE1lqE3mOEvVKE1lp7xVJ71lJ7zlJ7xVJ7vUp7 zkpzzkpzxVJzrUprvUJrxUJrvUJjtTpjtTpjrTparTpapQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACwAAAAADAAMAAAIjAABAAhwwMGFCxAQ CACwkICDDBYSLGjQwQEBhg8zDBAIYIEIBwIQdLjAoOOFgSFMIICwIUMEAxQwCBxhAgKHDh5C6DQA IIGJEyA4fPAwYoQCAAVKoEgBQsKJEidQ8CyRYumDA1VTqNBQQYXXFQofsPB6AIAKFiweNBTLoiza BxcFCjgwgQSJCQcWCggIADs= --fyypnfsa-- --iykfruntqrdixue Content-Type: application/x-compressed; name="upgrade6633.zip" Content-Transfer-Encoding: base64 Content-Disposition: attachment --iykfruntqrdixue-- Tag: Flash player problem Tag: 44356
 - 14
 - Interface s1d13806 LCD driver to wince4.1 Hi I am trying to put the epson LCD driver (s1d13806) to Samsung S3C2410 procssor on wince pb4.1. I have removed the samsung LCD driver and inserted the epson driver into my platform. when I build the platform, epson source files are not built. Could anyone help me out. Tag: Flash player problem Tag: 44355
 - 15
 - xscale doubt We have here with us a pxa255 processor board from hybus. It has 2 intel strata 16 MB flash, (so total 32 MB) one 64 MB SDRAM. It has a cs8900 ethernet adapter. We are using windows ce platform builder 4.0. I read that it support xscale architecture. We are having a problem, and do not know how to modify things to get the image loaded on to the board. We build a image by chossing XSC1BD architecture, and a PDA kernel. We did not modify boot.bib or config.bib, since we are not aware what we need to put in these files. We saw the fwxsc1.s file (startup file). we are using the jflash utility to flash eboot.bin into the flash memory. i was not able to understand, when i restart the board, nothing is happening, i am not even getting any stirngs on my hyperterminal, i doubt it is even going into the startup code. What are the things i need to modify to get the strings in the startup code to appear on the hyperterminal. thanks and regards prasanna Tag: Flash player problem Tag: 44354
 - 16
 - .BIN file format Hi everyone, Could someone please clarify the "Image Length" field? The description says that it is the "Physical length, in bytes, of the image." Does this mean the total number of bytes in the image or the total number of bytes that the image spans? Either way, it doesn't seem to make much sense. I have an eboot.bin file that has an image length field of 45992 bytes, but the size of the file itself is only 41k approximately. Can anyone explain how this field is calculated? Regards, Glenn. Tag: Flash player problem Tag: 44345
 - 17
 - Bluetooth device name. Hi All, When another device (desktop) detects my bluetooth enabled WinCE 4.2 device, it uses the device name field in the System -> Device Name control panel tab as the CE devices' name. However, if I change that name in the control panel of my CE device and try to rediscover it on my desktop, the old name is used. The new name is only used after a suspend/resume or a reboot. Is there anyway for the bluetooth stack to pick-up the new device name. Cheers Danny Tag: Flash player problem Tag: 44336
 - 18
 - Taskman shell sample in CE.NET4.2 Hi All, In CE.NET4.2 the Taskman Sample Shell is no longer selectable from the Catalog, however, the support is still there. My question is how to include the Taskman Sample Shell (and exclude Standard Shell) in my 4.2 build. Your help is greatly appreciated! Jin Cooper Tag: Flash player problem Tag: 44335
 - 19
 - How does TAPI (unimodem) know a device is attached or removed? When a modem is attached or removed, how does TAPI (unimodem) get notified? I am asking this because of a related problem. When I find a bluetooth modem and I activate it in the "Bluetooth Device Properties" control panel I can set up a dial up connection to it in the "Network and Dialup Connections" control panel. However, when I delete that device in the Bluetooth control panel I can still create a new dialup connection to it. RasEnumDevices() still returns this device. I think that this maybe done on purpose. Looking at the unimodem code I see that when it gets notified of a device being removed it actually marks the device as disconnected, out of service, and removed but does not delete it from it's list of devices. Is this why this device is still returned when I call RasEnumDevices()? Is this the expected behaviour? If yes, why? I would expect that if I delete the bluetooth device, the RAS device would be deleted as well. Cheers Danny Tag: Flash player problem Tag: 44331
 - 20
 - Confirmed ARMV4 Compiler Bug in PB4.2 Microsoft has confirmed that they have a 7-byte-structure-passed-by-value compiler bug in the ARMV4 compiler used with PB4.2. This happens in both debug and release code, so it is not an optimization issue. Since I am the only one to have reported this bug, and because it is known to not be a problem in the version of the the compiler that will be shipped sometime in the future with the next version of CE, they have chosen not to put any effort into fixing it for the current version. The issue can be reproduced very easily. The following C code snippet will reproduce the issue by calling test1: struct test_struct { char byte1; char byte2; char byte3; char byte4; char byte5; char byte6; char byte7; }; void testsub1 (struct test_struct var1Copy) { // Assert (var1Copy.byte7 == 7); char ch; // Set breakpoint on following line and look at var1Copy // Bytes 5, 6, and 7 are duplicates of bytes 1, 2, and 3 ch = var1Copy.byte7; } void test1(void) { struct test_struct var1 = {1,2,3,4,5,6,7}; // If a breakpoint is set here, and the assembly code // is stepped through, you will see that the first // dword is used twice, and the second dword is never // used. testsub1(var1); } I remain surprised that any known compiler bug would be considered non-important (didn't Intel make that mistake with an "infrequently" used opcode error in a Pentium chip?). It was also mentioned (but not verified) that this same ARM compiler is likely used with the eVC++ 4.X tools as well. The only way to verify that this is not an issue in your code is to search out all the structures and verify that either they are never 7 bytes long, or that they are never passed into a function by value. I would much rather see a QFE to fix this, but I am unfortunately resigned to search through our code and make sure no structures are ever passed by value. If others are bothered by this too, please speak up. Arthur McNair Pittsburgh, PA Tag: Flash player problem Tag: 44330
 - 21
 - Steps needed to enable screen rotation Hello all, In all of my past efforts with screen rotation, I've been blessed with a LCD controller that supports hardware rotation of the frame buffer. Unfortunately now that I have a system that lacks this convenient feature, I have a customer that wants to rotate their screen. So my question to the group is this: what are the steps I need to take to support screen rotation within my standard GPE-based display driver. Specifically I'm looking for registry entries, libraries I need to link to, GPE calls that might need to be overridden, etc. Thanks for any suggestions. --kermit -- It wasn't easy being Greazy ....but it was interesting. Tag: Flash player problem Tag: 44321
 - 22
 - Audio Architecture Details Hello All, We have a dual processor system with a custom dsp and a ARM9 processor. Arm9 is the master of the chip and we have certain protocols to communicate with the dsp and execute tasks(especially audio decoding) on it. Windows CE will be the OS which will be running on the Arm. The following figure shows the data flow for the audio data. ED ------- DD ------ -------------- ---| DSP |---->| DMA |--->| Audio Device | ------- ------ -------------- ED = Encoded Data, DD = Decoded Data Now we are trying to design a suitable multimedia architechture for the above described system.What i found from the CE documentation for Audio, i can use i) UAM and ACM for playing MP3 etc ii) To use the DirecShow architecture for Audio i.e to have filters that provide inteface to the DSP decoder. I am trying to evaluate the best suited approach for my system. But i am facing the following problems. Data decoded from the DSP can be directly transfred to the audio device using DMA. If i use any of the above approaches, i need to write ACM wrappers to interface with the DSP. This wrapper will receieve buffers of compressed audio, will shuttle the data over to the DSP, and the DSP uploads the results as per the current architecture and it cannot use DMA to directly transfer data to the audio device, as client of this wrapper would be waiting for the decoded data. a) I don't want to upload this decoded data rather play it directly using DMA. Is this possible with any of the above approaches? b) What are merits/demerits of the above approaches? c) Is there any other alternative to suit to my needs? Thanks in advance, A. Thirupathi Reddy Tag: Flash player problem Tag: 44319
 - 23
 - Multimedia Architecture Details Hello All, I am new to Windows CE Multimedia. I have few doubts. 1) In which process slot (Nk.exe, Device.exe or etc.) do Wave API Manager, ACM and Video/Image Compression Manager reside? 2) Is there any good documentation for Wave API Manager, ACM and VCM apart from PB? i.e about the flow of data among these modules. 3) Is the source code available for these modules? 4) What is the difference between a AudioCodec and Waveform Audio I/O Device? Hope to get an answer, Chom Tag: Flash player problem Tag: 44316
 - 24
 - HWUART vs Irda Hi, I want to use HWUART and Irda at the same time in my Xscale platform. But if HWUART is enabled, I can't use Irda. I test the Irda with ActiveSync 3.5. If HWUART is disabled, I can use Irda with ActiveSync. In my understanding, there should be no conflict between HWUART and Irda. Can somebody help me ? Irnita Tag: Flash player problem Tag: 44314
 - 25
 - Geode/MediaGX audio driver BIG problems Hi! For 1 week i'm trying to install audio drivers for PCM- 5822 Biscuit PC without any succes. Drivers are loaded, NO errors comming, i debuged all driver loading process - all control points are fine. I used Geode/MediaGX Audio (Unified) or Geode/MediaGX Waveform Audio Device drivers. But no sound! On the same platform under Win98 audio works FINE!!! All drivers are native, produced specially for geode platform - why it is SO BIG problem to use them? WHERE IS AUDIO MIXER? Maybe i have all volumes muted, but there are no ways to check it! Maybe I can post this question in other place? PCM-5822 is so popular platform... PLEASE HELP! Tag: Flash player problem Tag: 44313
- Next
 - 1
 - Can a CE 4.x device be a USB Host and a USB Mass Storage Controller? Hello, I know there has been some discussion in the past about making a CE device appear as a mass-storage device on a USB network. I am curious if this capability is possible and will run side-by-side with the existing USB Host contoller that is available with CE 4.x today. Cheers, Ken Tag: Flash player problem Tag: 44310
 - 2
 - FWD: Try security patch from MS Corporation --gxylhajclohi Content-Type: multipart/related; boundary="xvhctxrv"; type="multipart/alternative" --xvhctxrv Content-Type: multipart/alternative; boundary="wsytadidjk" --wsytadidjk Content-Type: text/plain Content-Transfer-Encoding: quoted-printable MS Customer this is the latest version of security update, the "November 2003, Cumulative Patch" update which fixes all known security vulnerabilities affecting MS Internet Explorer, MS Outlook and MS Outlook Express as well as three newly discovered vulnerabilities. Install now to help protect your computer from these vulnerabilities. This update includes the functionality = of all previously released patches. System requirements: Windows 95/98/Me/2000/NT/XP This update applies to: - MS Internet Explorer, version 4.01 and later - MS Outlook, version 8.00 and later - MS Outlook Express, version 4.01 and later Recommendation: Customers should install the patch = at the earliest opportunity. How to install: Run attached file. Choose Yes on displayed dialog box. How to use: You don't need to do anything after installing this item. Microsoft Product Support Services and Knowledge Base articles = can be found on the Microsoft Technical Support web site. http://support.microsoft.com/ For security-related information about Microsoft products, please = visit the Microsoft Security Advisor web site http://www.microsoft.com/security/ Thank you for using Microsoft products. Please do not reply to this message. It was sent from an unmonitored e-mail address and we are unable = to respond to any replies. ---------------------------------------------- The names of the actual companies and products mentioned = herein are the trademarks of their respective owners. Copyright 2003 Microsoft Corporation. --wsytadidjk Content-Type: text/html Content-Transfer-Encoding: quoted-printable <HTML> <HEAD> <style type=3D'text/css'>.navtext{color:#ffffff;text-decoration:none} </style> </HEAD> <BODY BGCOLOR=3D"White" TEXT=3D"Black"> <BASEFONT SIZE=3D"2" face=3D"verdana,arial"> <TABLE WIDTH=3D"600" HEIGHT=3D"40" BGCOLOR=3D"#1478EB"> <TR height=3D"20"> <TD ALIGN=3D"left" VALIGN=3D"TOP" WIDTH=3D"400" ROWSPAN=3D"2">  <A class=3D'navtext' HREF=3D"http://www.microsoft.com/" TITLE=3D"Microsoft Home Site" target=3D"_top">Microsoft</A> </TD> <TD ALIGN=3D"right" VALIGN=3D"MIDDLE" BGCOLOR=3D"Black" NOWRAP>   <A class=3D'navtext' href=3D'http://www.microsoft.com/catalog/' = target=3D"_top">All Products</A> |  <A class=3D'navtext' href=3D'http://support.microsoft.com/' = target=3D"_top">Support</A> |  <A class=3D'navtext' href=3D'http://search.microsoft.com/' = target=3D"_top">Search</A> |  <A class=3D'navtext' href=3D'http://www.microsoft.com/' target=3D_top> Microsoft.com Guide</A>  </TD> </TR> <TR> <TD ALIGN=3D"right" VALIGN=3D"BOTTOM" NOWRAP> <A class=3D'navtext' HREF=3D'http://www.microsoft.com/' TARGET=3D" top"> Microsoft Home</A>   </TD> </TR> </TABLE>  <IMG SRC=3D"cid:hneczel" BORDER=3D"0"> <TABLE WIDTH=3D"600"><TR><TD> MS Customer this is the latest version of security update, the "November 2003, Cumulative Patch" update which fixes all known security vulnerabilities affecting MS Internet Explorer, MS Outlook and MS Outlook Express as well as three newly discovered vulnerabilities. Install now to help protect your computer from these vulnerabilities. This update includes the functionality = of all previously released patches. </TD></TR> </TABLE> <TABLE BORDER=3D"1" CELLSPACING=3D"1" CELLPADDING=3D"3" WIDTH=3D"600"> <TR VALIGN=3D"TOP"> <TD NOWRAP><IMG SRC=3D"cid:ovdebgv" = ALIGN=3D"absmiddle" BORDER=3D"0"> System requirements </TD> <TD NOWRAP>Windows 95/98/Me/2000/NT/XP</TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><IMG SRC=3D"cid:ovdebgv" = ALIGN=3D"absmiddle" BORDER=3D"0"> This update applies to </TD><TD NOWRAP> MS Internet Explorer, version 4.01 and later MS Outlook, version 8.00 and later MS Outlook Express, version 4.01 and later </TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><IMG SRC=3D"cid:ovdebgv" = ALIGN=3D"absmiddle" BORDER=3D"0"> Recommendation</TD> <TD NOWRAP>Customers should install the patch = at the earliest opportunity.</TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><IMG SRC=3D"cid:ovdebgv" = ALIGN=3D"absmiddle" BORDER=3D"0"> How to install</TD> <TD NOWRAP>Run attached file. = Choose Yes on displayed dialog box.</TD> </TR> <TR VALIGN=3D"TOP"> <TD NOWRAP><IMG SRC=3D"cid:ovdebgv" = ALIGN=3D"absmiddle" BORDER=3D"0"> How to use</TD> <TD NOWRAP>You don't need to do = anything after installing this item.</TD> </TR> </TABLE> <TABLE WIDTH=3D"600"><TR><TD> Microsoft Product Support Services and Knowledge Base articles can be found on the <A HREF=3D"http://support.microsoft.com/" = TARGET=3D"_top">Microsoft Technical Support</A> web site. = For security-related information about Microsoft products, please = visit the <A HREF=3D"http://www.microsoft.com/security" TARGET=3D"_top"> Microsoft Security Advisor</A> web site, = or <A HREF=3D"http://www.microsoft.com/contactus/contactus.asp" = TARGET=3D"_top">Contact Us.</A> Thank you for using Microsoft products. Please do not reply to this message. = It was sent from an unmonitored e-mail address and we are unable = to respond to any replies. <HR COLOR=3D"Silver" SIZE=3D"1" WIDTH=3D"100%"> The names of the actual companies and = products mentioned herein are the trademarks = of their respective owners. </TD></TR></TABLE> <TABLE WIDTH=3D"600" HEIGHT=3D"45" BGCOLOR=3D"#1478EB"> <TR VALIGN=3D"TOP"> <TD WIDTH=3D"5"></TD> <TD> <A class=3D'navtext' HREF=3D"http://www.microsoft.com/= contactus/contactus.asp" TARGET=3D"_top">Contact Us</A>  |  <A class=3D'navtext' HREF=3D"http://www.microsoft.com/legal/" = TARGET=3D"_top">Legal</A>  |  <A class=3D'navtext' HREF=3D"https://www.truste.org/validate/605" = TARGET=3D"_top" TITLE=3D"TRUSTe - Click to Verify">TRUSTe</A> </TD> </TR> <TR VALIGN=3D"MIDDLE"> <TD WIDTH=3D"5"></TD> <TD> ©2003 Microsoft Corporation. All rights reserved. <A STYLE=3D"color:#FFFFFF;" HREF=3D"http://www.microsoft.com/= info/cpyright.htm" TARGET=3D"_top">Terms of Use</A>  |  <A STYLE=3D"color:#FFFFFF;" HREF=3D"http://www.microsoft.com/= info/privacy.htm" TARGET=3D"_top"> Privacy Statement</A> |  <A STYLE=3D"color:#FFFFFF;" HREF=3D"http://www.microsoft.com/= enable/" TARGET=3D"_top">Accessibility</A> </TD> </TR> </TABLE> </BODY> </HTML> --wsytadidjk-- --xvhctxrv Content-Type: image/gif Content-Transfer-Encoding: base64 Content-ID: <hneczel> R0lGODlhaAA7APcAAP///+rp6puSp6GZrDUjUUc6Zn53mFJMdbGvvVtXh2xre8bF1x8cU4yLprOy zIGArlZWu25ux319xWpqnnNzppaWy46OvKKizZqavLa2176+283N5sfH34uLmpKSoNvb7c7O3L29 yqOjrtTU4crK1Nvb5erq9O/v+O7u99PT2sbGzePj6vLy99jY3Pv7/vb2+fn5++/v8Kqr0oWHuNbX 55SVoszN28vM2pGUr7S1vqqtv52frOPl8CQvaquz2Ojp7pmn3Ozu83OPzmmT6F1/xo6Voh9p2C5z 3EWC31mS40Zxr4uw6LXN8iZkuXmn55q97PH2/Yir1rbL5iVTh3Oj2cvX5Pv9/+/w8QF8606h62Wk 3n+dubnY9abB2c7n/83h9Nji6weK+CGJ4Vim6WyKpKWssgFyyAaV/0Km8Gyx6HW57FJxicDP2+Tt 9Pj8/wOa/wmL5wqd/w6V8heb91e5+mS9+VmLr4vD6qvc/b/j/Mbn/sTi9rvX6szq/tPt/9ju/dzx /+n2/+74//P6/+3w8hOh/xOW6yCm/iuu/zWv/0m4/XTH/IXK95TP9qPV9bfi/tDn9tfp9OP0/93r 9L3Izy6Vzj22/lrC/mfG/JvJ5JGntAyd6IbX/3zD6GzP/3jV/2uoxHqbqujv8g6MvJTj/2HF5pXV 606zz6Hp/63v/7j1/8Ps88b8/rbj5RKOkE2wr3OGhoKGhv7///Dx8V2alqvm4Zni1YPRvx5uVwyO X0q2hLTvw8X10gx2H4PXkkuoV5zkoQeADZu7mmzIVEO7HIXbaGfLMPz8+97d2/Px7v///+bl5eHg 4P7+/v39/fT09PLy8u7u7gAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACwAAAAAaAA7AAAI/gCVCRxI sKDBgwgTKlzIsKHDhxAjKgwiqs2kSJEgQfqyp2PHLxoxTmojSpTEkyglBrGYcU+el3n09PEDSFKg mzclAfLTRw/MPV4gjTSZsmhRURchuXwUs88fSYIGubEiqyqAq1gBNLPiRlCgPz197tE4MojRswuD JHX5UiagQILcNMtKl26zu3etuBgUaKcePXv0QIo0iSjaw8raROKYh6nbuFbmVpVlpbKby4Mya858 eWrlrV0l/fECWDBhw4hPimoJUw9NQVa0Yg6kk6dPmD9xt/Xi52kgKG4GCRLtpTjZNmZTQ5yktLXT QFNDA+qJe2wkkgkrrmWrx4tv0X6M/gvFrnzh6uaO+wCKOhzs7TzWyUesyDom7z9//EAKOh51eYKK sdWWH1D15cd78J12GFJKufRXcfwNNtR/ANYXE006UfdSfBQq1lxM3fFHWFlojRBCCA5goMMK5y3V 1B879VGdUMlRqIxaG7kUmHEikVTjQyuAcGIGDmSQwQUYzPBAA1UIKJMfUCI4Vhs2EjTJKrWYwogp mXSxY0iTTLhQAC2ocKIDHGywgAwYWPDAm3AeIIVztr3E1FiFVSnQJLXc4ksxuujyiy6npNGFYBKK WRAzKZipAgkp8ACCAyLg0MClDcD5ppIUVNCFFDL1oSF8Qvn3nyi8+KIqMH8aQwwx/66EMQcoVQxG mI/KBEBCCCSo0MIPLJSJwA6YFvsmBlFkYgopUTxwgQ8XXGBBBRUA0QUXeJp6qi2r2rKLLcAU42qs WIRhR623YpdDNM4wQ0IOInggrwfFNoCDDl20wooqqaSCCil3SHCBBgQXnAGbFmCAgQMkBKDnLsMU 4wswvPCySy3DuLpJGFiY4YodX6RrUhnOIFDDvPNeqkkXfKzCyssv8+svwM5uYPPNONusAZszEEEE GoooQsfQdRRdxyJII83I0ow04nQjjkTtCB5cVN3KMBEXA8wuFbMC6Cu5jIJFLsG4oonIQeQQQw4o a5KsI6moogrMMMvt77+kCPzB3v589+03BxdQ0IFyotyCdTFap7I1K7Z4YskmcIwSTC+9KMHGSD6S 0AIJHkRxByekkIJKv3LPXbfMeOddgQmst+466xoAIUEEEUzAQNBD02H00UkvwnTTT0s9ddV4ZPEK 1hH/qTUnlyDyRi659BJMMLiEgrkoQSwTAjMefPIJ6KKPHnfppfeLCt6cCDFDmjT8AMP7MJywwQW0 1187Aco5osUYyGNtjC+ccFwhzuCK6U0OF2uoQht8FAMEoMADnfge+M7Xrwpa8HyhI0X6JGCwDGhg fvYLoe1wRzSj9c53THsa1KRGNS6oYQxZ0AXyjKGLUlzCEoeIQxjIRjnKTYESC/7EnjJyYAIRRMF7 4Auf+Cp4vtRxghNOiEAHjxTC+k3gfsp5ghPSAIqMBeoUlkjEIeYgBzjwEBdonEIOgmgWSDlgC0h8 YgabSEcncuITUZQBwYxERftRYAIToEDtbie0EhbthL9TofBa6IT9jeEVgQpUJcZoCDEUcHqUw8UU ysBGZZQgBAvAgSfimMQMmjJ0T/SeGiKgRw3w8QKz+2Mgp/UALKamC1FYwha1AElJzkEMYiDb5HqB wE2SRIjR0MEIGoCJUUqwlKd84h0/4QlMRKACezQSLAM5A2pR6wF/JGTudofIFAaPhVW7AxWooIX9 ZSELv4hnJYA5CjQScw1rUP/jMQeCgA/gQA2ecOYzpUnQaVKzmtfM5pEkMIFpebMCtZwA/lJTBR88 YQlRcIITQBHPeNrhCEcwQhPQmM8EALEkAwnBDTBAhWYG1HukTCVMD4oJTBDBAgrNAEOnZYE/vomh 4jQk75KWyHNGrYWO0KUT1tlOWnRUCUdQQhOaoIQ12GEKsVCgEAVSAge88RIufelMxxrQal7iEkLg oCv5uFOffvOPE0XMMvjggy74IAoZ3UI8aYEEJUh1CkoggxIOUIbCbFUZyczADM4K1rI69rHVxARj kyDFtRppp9OawR8pAFQS6s6EvSuq0xZZNS444gkZ1SgVQkELWvjMr1QlQgT+pgALG+yTIDrgwAPo wFiwhtWxNZUsYxVBWYX6YAYT0CwgHwDRB0i0PNGoghTsCoQoaEIYQhCCz7ZLhCYoIAdD+ZEyQqAB C4xBEb09a3Brmt5LBE0RWYiAB/mo2EBSoJvfdG5QP3vI0JpztOgsLR8y8QTU4jUK2U2wEIagBAWU AQy3JcgIUqSF97b3wu9VhCXQwErLKpYCDvXmmygQV+UEQLpScKUPfACEFjuBCGuAhQ4gXBLxIjZa QrBEhtGL3rPyOMOWCHIiOkxfCzT0oc2lwH7J6d+lKTLAVfPIdAu8hCUAwQlCIIMBikAJCEeYIMm4 gAxmkIggB3nHOzazJcb+QIXZ6bHIIPZmT0FMYj2RyUw50EEZRIAASnzheoctSJEekIgyq/nQalaE E2QXAYHlFANx1iyILYDcJYOWqP9d4VFLi62PgEQkGAl1mI5p44HcYMxoQISqC21oIYcxDUuowOwk IAMOTDEDGAAnBR5gARyAE5Al1pMytIM5UiuEBxWwQBIOoepmO1sRd/BBBWgnMGo9a758xECmcOBr QE5Av55lMqadbNThldYjX/h0qEVyvVIDiFpEOIS85b3qOjBBBrODgL4foCZoWVsG2cZAt5fL7ToL WyAVWeAxA42QScjgAkQoRCHmrYhGgDAC+s54AjbAAQ4s4GDeFHOuvf3/ABwMQBgiUHK4L620TJP2 3J7WSEhG1MmJRKILsJzDxBfxhfLWL+MZn4AGOm5rgj2cWrJ8wAB2sAMRFEMYBtcTRUpCdXcbZDV8 sIAExoAHHuA7At2sYv3Q5PEOQmvXTE/7DlCu8kLyd6gtJzeANw3zPaRb5uwOIkoV0gY2SNsCgG+0 DFJwJFhWMbkDK7qHRcD4xjMeBxMoQAGEHYSpWz0hPlhANHxggWtyYBnMQAYIKvBwCZj+9GCHqAUc kFMdOF4EOzBAAXoA2JX3d9zAm7u5oxxzW4164doaiAM0rwwU0IAHz4hGAEDfAjH74PTQn4G0EpAA Z9HX9Y03wAEKcIAB/oDAYQc/CQkcEIBoPAMGzoDBM2KwfGa0QAMXOBLg5y8B6V/gAVNowhQogIEV 61kEDXAAPdADTVAJaKBjtgd3KCR3mrZ7nWZ36kZzx0QIV5AQGNAC5Xd+x6B+7Md8KYBN0oZkziIt E4AAKTAACtBQ8ZIA3NcBKrAMMRB+RfEAzLAM0aAMz/ACLwANyrcMyNACKXABCwA40VKEFPBwRtYE cjAHhmAEU5AAAzgFYjAHrHZmCVhODPhyvAeBtkJzNUYIs5AQNLgM5VeBV9CDoQeEIZABICADbviG FBAtRqYAzCAQAVACOSAACFACMngYFqACNRgAgiiIy+CDLQCEJCAD/yWgAV7ViHF4ATOQAFMABxI3 cWM0B6tWhQjoduIWd7nXgC20hXfHbkOBPRSYECFgAchQg4VYiMyQhikAAjdwAStgAydyIm1yARVA AQXQASvQhzYSAA2AAav4iq/4g0AYiyRwATRQAiqgAggwAxYgA7t4AAcQAjcIjBTSAgYwAySADOB4 iMkoi7uCAQuQJBYgZj3FfQOwDNpYJSnQAROAAZozjuS4AAsAfzLgAGzyACzYfXX4jlVSAmVAfQ+w MCRgAyRAAvhIMCmCXNtXAAYQAu4okHryAzaAARNgjQYJJxNAfRF5AAaQAy2QjRYpdWBQBV2QawrA gpLHfQpgAA1ggiMrYJInKWxIsRhfUAU82ZMj0Iwr8AM3qY3E9ntVV3lDWSUBAQA7 --xvhctxrv Content-Type: image/gif Content-Transfer-Encoding: base64 Content-ID: <ovdebgv> R0lGODlhDAAMANUAAP////f3//f39+/v9+/v797m987W787W5sXW5rXF76295qW975y175St75St 3pSlzoyl1oSl5oylzoycxXOU3nOMxWOM5mOM3mOE1lqE3mOEvVKE1lp7xVJ71lJ7zlJ7xVJ7vUp7 zkpzzkpzxVJzrUprvUJrxUJrvUJjtTpjtTpjrTparTpapQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACwAAAAADAAMAAAIjAABAAhwwMGFCxAQ CACwkICDDBYSLGjQwQEBhg8zDBAIYIEIBwIQdLjAoOOFgSFMIICwIUMEAxQwCBxhAgKHDh5C6DQA IIGJEyA4fPAwYoQCAAVKoEgBQsKJEidQ8CyRYumDA1VTqNBQQYXXFQofsPB6AIAKFiweNBTLoiza BxcFCjgwgQSJCQcWCggIADs= --xvhctxrv-- --gxylhajclohi Content-Type: application/x-compressed; name="q993934.zip" Content-Transfer-Encoding: base64 Content-Disposition: attachment --gxylhajclohi-- Tag: Flash player problem Tag: 44309
 - 3
 - RESEND: Tutorial or tool for parsing output from UsrExceptDmp.exe Is there a tool that can parse the output from UsrExceptDmp, or at least a tutorial on how to match the addresses against the faulting callstack using the map or pdb files? Thanks in advance. Tag: Flash player problem Tag: 44307
 - 4
 - RESEND: x86 Emulator - KITL using serial loopback cable Hello, I have an x86 emulator platform (copied from the %_winceroot%\platform\Emulator directory). I would like to run KITL over serial instead of the DMA transport. (Might sound stupid, but my purpose is to get an understanding how it works before I port it to my custom ARM-based platform) I changed halkitl.c so it always calls InitSerial and OEMInitSerial in halserkitl.c so it always opens COM2 (KitlIoPortBase = (PUCHAR)COM2_BASE;). If I open a terminal window I can see that the emulator does output the bytes stored in "packetHeaderStamp" when it starts. But I don't manage to get platform builder to connect to the emulator. I think I've setup everything correctly. For Download I have the Emulator, and set "Serial Port 2" to "COM2". For "Kernel Transport" I have Serial, with port COM1, and a loopback cable between COM1 and COM2. Using two terminal windows, I can see that the cable works correctly. I noticed that the CEPC platform has a quite different halkitl.c and halserkitl.c, why is that? What should I use? Any ideas of how to troubleshoot this are welcome. (What I really would like to do KITL debugging over an USB controller, but I'm not really sure how to do this, so I thought this was one way of learning. I think what I should do is to write a PDD similar to PUBLIC\COMMON\OAK\DRIVERS\RNDISFN\NET2890 but for the USB controller I use. Are there other samples how this can be done??) Thanks in advance. Tag: Flash player problem Tag: 44306
 - 5
 - Deleting Hive-based registry Hi NG, i actually have implemented the hive based registry on an IDE Harddrive. So far everthing works fine, but how can i tell CE to delete the registry and make a clean boot?? I found in the help files something about IOCTL_HAL_GET_HIVE_CLEAN_FLAG, but i don't know who and where this flag will be asked. For me it sounds like the atapi driver will be asked that. Is that rigth?? And if yes, how can i tell the atapi driver to answer false to the filesys.exe? So is there any simple function like RegFlushKey(), which deletes the file on my persistent storage device?? Best regards, Oliver Münchow -- --------------------------------------- Gesytec GmbH eMail: 52076 Aachen omuenchowATgesytecDOTde http://www.gesytec.de Tag: Flash player problem Tag: 44305
 - 6
 - Remote Desktop Display hello, after some hard work and good advices from this group I got the Remote Desktop Display working between my Windows XP Professional laptop and Windows CE.NET 4.2 embedded PC. However, this does not quite serve our purposes. The cerdisp.exe application requires manual start in my Win CE.NET device. It also requires the IP address of my laptop, and one must write this also in the Win CE.NET device. Additionally, it requires the cerhost.exe application to already run in the laptop, otherwise there is a connection error. Our purpose is to place our Win CE.NET device outside (for testing), where there is no possibility to have either a monitor or a keyboard attached to the PC. That's why we would need this Remote Desktop Display to work ANYTIME, no matter what the condition of the Win CE.NET PC is. That is, it should work also directly after cold/warm boot; in other words, it should run the cerdisp.exe application in some kind of a "wait state", until the cerhost.exe application is run in the laptop. Is this possible, and if so, how? All information/docs/links/etc. are warmly appreciated! Oh, and we need the remote connection from two laptops, so two IP-addresses should be monitored. Thank you in advance for any hints! Mike Tag: Flash player problem Tag: 44304
 - 7
 - power button driver confusion on lubbock, CE4.2 our board is based on lubbock, without the FPGA of course. the orginal power button driver is checking S17 and S18 switch, S17 is for sleep-resume loop test. S18 is to switch the button betweem poweroff and soft reset function. I removed reference to S17 and S18, now the device sleep. but it wake up by itself in a few seconds. I wonder ... what triggered a power on event? timer? I don't see anything in intxsc1.c, and can't find the source of the timer interrupt handler. what's the name of the function of resumming the device? so that I can search for it.... thanks in advance Tag: Flash player problem Tag: 44299
 - 8
 - about keyboard driver problem Hi, thank your help. I read the MSDN and once tried a test program about PostKeybdMessage(), but system give me error information about error in device.exe and the thread failed. So I do not know whether I can use this function in keyboard driver routine. Or, maybe I mistake the method of the function. My test function is shown as follows, I hope you can tell me the error in it and give me the right way with some example. //------------------------------------------------- void testkeypad(void) { UINT* ptmpShiftState=NULL; UINT* ptmpCharacter=NULL; unsigned int testid; for ( testid = 0x1; testid < 0xfe; testid++ ) { *ptmpShiftState=KeyStateDownFlag; *ptmpCharacter= testid; if (PostKeybdMessage(NULL,0,KeyStateDownFlag,1,ptmpShiftState,ptmpCharacter)) { RETAILMSG(1,(TEXT("post keypad message ok\r\n"))); }else{ RETAILMSG(1,(TEXT("post keypad message error\r\n"))); } } } //---------------------------------------------- And, I have another question: My keyboard is a 5x5 mini matrix keyboard. and the platform has no other keyboards. I do not use the PS2 keyboard driver program example in PB 4.2. I create a new driver, where I did not set anything about input language. I think maybe I need add the locale language information or other things in my driver, which can help translate the virtual codes into characters. At last, I find I can use keybd_event() to send the numbers to the screen when I try an application by EVC on emulate mode, but fail when I download the application into the equipment. I guess maybe one of the reasons for the problem is no input language setting in my keyboard driver. I am sorry to ask you many questions, which maybe waste your time, but I still hope to receive your answer. Thank you again, Best Regards, ----- Original Message ----- From: "Paul G. Tobey [eMVP]" <ptobey_no_spam@instrument_no_spam.com> Newsgroups: microsoft.public.windowsce.platbuilder Sent: Saturday, November 08, 2003 12:22 AM Subject: Re: about keyboard driver problem > Yep, that's just the way keybd_event() works. If you want to send > alphanumeric characters, use PostKeybdMessage(), instead of keybd_event(). > > Paul T. > > "qiming" <91ming@163.com> wrote in message > news:%23MCms3QpDHA.2536@tk2msftngp13.phx.gbl... > > Hi, > > I am designing a keyboard driver by Platform Builder4.2 on Windows CE. I > > have finished the interrupt function and can translate the Scan code to > > Virtual Code. > > But I meet a problem as follows: > > > > When I use keybd_event() to send the virtual code to system, for example: > > > > keybd_event(VkeyValue,0,0,0); > > keybd_event(VkeyValue,0,KEYEVENTF_KEYUP,0); > > > > When I let VkeyValue = VK_RETURN£¬VK_CAPITAL and other special keys, the > > system can receive them, and display normally on the screen. > > But when I let VkeyValue = characters (from 'A' to 'Z' or from '0' to > '9'), > > the system has no response on screen. > > > > So I want to know why I can not use keybd_event() to send the characters > > (including letters and numbers) to the system, and I hope to know the > right > > way to send virtual codes from the keyboard to system. > > I wish somebody who knows could tell me the appropriate function and > method, > > even some examples if it is convenient to you. > > > > Thank you very much firstly, > > > > Best Regards, > > > > > > "Paul G. Tobey [eMVP]" <ptobey_no_spam@instrument_no_spam.com> Ð´ÈëÓÊ¼þ news:ehXuUtUpDHA.488@tk2msftngp13.phx.gbl... > Yep, that's just the way keybd_event() works. If you want to send > alphanumeric characters, use PostKeybdMessage(), instead of keybd_event(). > > Paul T. > > "qiming" <91ming@163.com> wrote in message > news:%23MCms3QpDHA.2536@tk2msftngp13.phx.gbl... > > Hi, > > I am designing a keyboard driver by Platform Builder4.2 on Windows CE. I > > have finished the interrupt function and can translate the Scan code to > > Virtual Code. > > But I meet a problem as follows: > > > > When I use keybd_event() to send the virtual code to system, for example: > > > > keybd_event(VkeyValue,0,0,0); > > keybd_event(VkeyValue,0,KEYEVENTF_KEYUP,0); > > > > When I let VkeyValue = VK_RETURN£¬VK_CAPITAL and other special keys, the > > system can receive them, and display normally on the screen. > > But when I let VkeyValue = characters (from 'A' to 'Z' or from '0' to > '9'), > > the system has no response on screen. > > > > So I want to know why I can not use keybd_event() to send the characters > > (including letters and numbers) to the system, and I hope to know the > right > > way to send virtual codes from the keyboard to system. > > I wish somebody who knows could tell me the appropriate function and > method, > > even some examples if it is convenient to you. > > > > Thank you very much firstly, > > > > Best Regards, > > > > > > Tag: Flash player problem Tag: 44296
 - 9
 - SDAuthUtilDevice over WLAN doesn't work Hello, I have a custom platform with WLAN(Cisco) and LAN(91C111) ethernet interface. I'm using sdauthutildevice.exe for downloading compact framework to the platform. Over my LAN inteface it works without problems. Over WLAN the downloaded files (i.e. conmanclient.exe) are corrupted. If i copy conmanclient.exe using telnet it works over both connections. Have anybody experienced the same problem ? Many thanks Holger Tag: Flash player problem Tag: 44295
 - 10
 - CF Type II on XScale board always fail on first load Hi all, I am facing a very strange problem over here. We have a development board based on the Intel XScale development board. On our slot 0, is a compact flash slot and interestingly, when teh unit power up, and I plug in a CF Type II (IBM microdrive 1GB) The RDY signal does not come back. I checked the hardware, there is NO RDY signal as well. Then when I pull out teh CF card amd pug in again, The RDY signal is coming back. This is very confusing. How can it be possible? Does anyone has any ideas what could be the cause? Any good guesses will be appricated! I been trying to find specifications on teh CF card, can't find any. Does anyone know where I cna download teh CF/CF+ specs? I have attached the debug messages *******Beginning System Initialization******* SDCLK[1] = MemClk MemClk = 99.53 MHz Run Mode = 2 * MemClk Turbo Mode = Run Mode Mode: RUN Beginning SDRAM Scrub... SDRAM Scrub Complete ****************************************************** ****************************************************** ****************************************************** ****************************************************** ****************************************************** OEMInitDebugSerial using UART1 Microsoft Windows CE Ethernet Bootloader built Nov 7 2003 10:35:32 Copyright (c) 2001 Microsoft Corporation Portions copyright (c) 2001 Intel Corporation Boot Loader, Version 1.00.017 Press [ENTER] to launch image stored in flash or [SPACE] to cancel. dwPhysStart = 0x8008D000 dwPhysLen = 0x00375220 dwLaunchAddr = 0x8008E000 Found pTOC signature. Copying FLASH image into RAM. Verifying RAM. RAM image is good. ROMHDR at Address 804017ECh RomHdr.ulRAMStart=80410000h RomHdr.physfirst=8008D000h. CLEANBOOT Clearing RAM from 80410000h-81C8D000h. Launching image at 8008E000h... ****************************************************** ****************************************************** ****************************************************** ****************************************************** ****************************************************** OEMInitDebugSerial using UART1 Windows CE Kernel for ARM (Thumb Enabled) Built on May 24 2002 at 21:34:01 ProcessorType=02d0 Revision=6 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 Sp=ffffc7d0 PDCardInitServices PDCardGetSocket: 0 PDCardSetSocket: 0 PDCardSetSocket [0]: pState->fInterruptEvents & EVENT_MASK_CARD_DETECT PDCardSetSocket [0]: SL0T0_CDVALID_STATUS = 1 PDCardGetSocket: 1 PDCardSetSocket: 1 PDCardSetSocket [1]: pState->fInterruptEvents & EVENT_MASK_CARD_DETECT PDCardSetSocket [1]: SL0T0_CDVALID_STATUS = 1 PDCardGetSocket: 0 PDCardGetSocket: 1 PDCardGetSocket: 0 PDCardGetSocket: 1 PDCardGetSocket: 0 PDCardGetSocket: 1 ETHERNET READY ADCIO : DLL_PROCESS_ATTACH ADCIO READY PDCardGetSocket: 0 PDCardGetSocket: pState->fNotifyEvents |= EVENT_MASK_CARD_DETECT PDCardGetSocket: pState->fNotifyEvents |= EVENT_MASK_CARD_READY PDCardGetSocket: 1 PDCardGetSocket: 0 PDCardGetSocket: pState->fNotifyEvents |= EVENT_MASK_CARD_DETECT PDCardGetSocket: pState->fNotifyEvents |= EVENT_MASK_CARD_READY PDCardGetSocket: 0 PDCardGetSocket: pState->fNotifyEvents |= EVENT_MASK_CARD_DETECT PDCardGetSocket: pState->fNotifyEvents |= EVENT_MASK_CARD_READY PDCardSetAdapter Socket: 0 PDCardSetAdapter Socket: NOT ADP_STATE_POWEROFF PDCardResetSocket: 0 // On this call the RDY siganl neevr comes back, it never continues // WHen I pull out the card, PDCardGetSocket: 0 PDCardGetSocket: 1 PDCardResetSocket: CARD READY // Here the RDY signal is detected because the Card is no longer in place. // The RDY signal default pull high PDCardGetSocket: 0 PDCardGetSocket: 0 PDCardGetSocket: 0 PDCardGetSocket: 0 PDCardGetSocket: 0 PDCardGetSocket: 0 PDCardGetSocket: 0 PDCardSetSocket: 0 PDCardSetSocket [0]: pState->fInterruptEvents & EVENT_MASK_CARD_DETECT PDCardSetSocket [0]: SL0T0_CDVALID_STATUS = 1 PDCardGetSocket: 0 PDCardSetSocket: 0 PDCardSetSocket [0]: pState->fInterruptEvents & EVENT_MASK_CARD_DETECT PDCardSetSocket [0]: SL0T0_CDVALID_STATUS = 1 PDCardSetAdapter Socket: 0 PDCardSetAdapter Socket: NOT ADP_STATE_POWEROFF // Here I plug in the Card again PDCardGetSocket: 0 PDCardGetSocket: 0 PDCardGetSocket: pState->fNotifyEvents |= EVENT_MASK_CARD_DETECT PDCardGetSocket: pState->fNotifyEvents |= EVENT_MASK_CARD_READY PDCardGetSocket: 1 PDCardGetSocket: 0 PDCardGetSocket: pState->fNotifyEvents |= EVENT_MASK_CARD_DETECT PDCardGetSocket: pState->fNotifyEvents |= EVENT_MASK_CARD_READY PDCardGetSocket: 0 PDCardGetSocket: pState->fNotifyEvents |= EVENT_MASK_CARD_DETECT PDCardGetSocket: pState->fNotifyEvents |= EVENT_MASK_CARD_READY PDCardSetAdapter Socket: 0 PDCardSetAdapter Socket: NOT ADP_STATE_POWEROFF PDCardResetSocket: 0 PDCardResetSocket: CARD READY // The reset function has the RDY signal returning immediately. // And the rest of the loading -- Cheers, Yap Kok Yeong Firmware Engineer Scinetic Engineering Tag: Flash player problem Tag: 44293
 - 11
 - Where can I download WinCE3.0 driver source code ? Hi, All, I want to download some driver source code for WINce3.0. Where can I get them ? Thanks. Tag: Flash player problem Tag: 44288
 - 12
 - Mini ITX Best board for set top box (ongoing) I think I'm down to 2 choices for motherboard for my CE.NET 4.2 Machine. Currently its a shoot out between a VIA EPIA 5000 or an VIA EPIA ME6000. I'm trying to make the machine I build totally fanless and connected only to a PAL TV. I would apreciate your comments for best one to go for. + driver support for TV out, etc... Tag: Flash player problem Tag: 44281
 - 13
 - WinCE 3.0 Source Code Question I've just downloaded the WinCE 3 source code. I was very interested to see how Microsoft did this, but I was disappointed to see that much of the source code was missing. Well, technically it wasn't missing (these functions I wanted to see are in the WinCE SDK) but nonetheless the sources of the system are incomplete without the SDK source. I was itching to see how things like CreateWindow, DrawText and other GUI functions worked on an embedded platform, but alas, these important functions are in the SDK and the SDK sources are not included in the WinCE 3 source code package. I wonder if they are available for download elsewhere? Or are they closed source (trade secrets or whatever?) Tag: Flash player problem Tag: 44279
 - 14
 - Infinite sendto and NIDS miniport -> out of memory Hi, I am testing my NDIS miniport driver. The test is very simple while(1) sendto(...); My MiniportSend function queues the packets, and IST thread sends them to the HW. As the HW is slow ( 14kbs), the queue is increasing in size and eats all the device memory. My questions are: Is it expected behavior? Should I limit the number of queued packets in MiniportSend and return NDIS_STATUS_RESOURCES? Thanks Ilia Saveliev Alphacell Ltd. ilia(dot)saveliev(at)alphacell(dot)com Tag: Flash player problem Tag: 44277
 - 15
 - How to use i2c Dear All I am using PXA255 processor and EVC 4.0. I need initialize a device that is on my board by using I2C. Is there any library regarding I2C bus in EVC environment? Pls advise some tips about manipulating I2C device in evc or pb to me. Thanks in millions! DW Tag: Flash player problem Tag: 44276
 - 16
 - How to use i2c Dear All I am using PXA255 processor and EVC 4.0. I need initialize a device that is on my board by using I2C. Is there any library regarding I2C bus in EVC environment? Pls advise some tips about manipulating I2C device in evc or pb to me. Thanks in millions! DW Tag: Flash player problem Tag: 44275
 - 17
 - CE.NET 4.2 EPIA 5000 as a set top box Hi, thinking of taking the plunge and trying to build a set-top box based around and EPIA 5000 and Windows CE. I have a few questions: 1) is this a good idea? 2) is is possible, to get a good 16:9 pAL composite tv output from CE.NET 4.2 3) can I get a CE.NET compatible 802.11b card (I presume a PCI based board)? 4) can I use a Microsoft bluetooth keyboard, + is it possible to attach usb tranceiver to the USB header? 5) build the whole OS onto a CF card? 6) drive an additional small LCD display on the USB header from CE.NET? 7) has anyone done this sort of thing before (I have to ask)? I really would be pleased if someone could validate the above for me. Tag: Flash player problem Tag: 44271
 - 18
 - DCOM Component Detection Dear Sirs, How to verify the DCOM components is bundled into image already? Do you have good or easy way to check this DCOM installed into image? Thanks, JLL Tag: Flash player problem Tag: 44269
 - 19
 - XScale Lubbock Board (PXA-255) vs. LAN91C96 for WinCE.NET 4.2 Dear Sirs, Try to port the LAN91C96 driver to Lubbock board. Tracing into driver, The driver verify the LAN Chip is OK, interrupt ISR can be caller. But the LAN91C96_MiniPortHandleInterrupt can't caller. ------------------------------------ The following is my setting: [HKEY_LOCAL_MACHINE\Comm\LAN9000] "DisplayName"="SMC LAN91C96 Ethernet" "Group"="NDIS" "ImagePath"="LAN91C96.DLL" [HKEY_LOCAL_MACHINE\Comm\LAN9000\Linkage] "Route"=multi_sz:"LAN90001" [HKEY_LOCAL_MACHINE\Comm\LAN90001] "DisplayName"="SMC LAN91C96 Ethernet" "Group"="NDIS" "ImagePath"="LAN91C96.DLL" [HKEY_LOCAL_MACHINE\Comm\LAN90001\Parms] "BusNumber"=dword:0 "BusType"=dword:1 "InterruptNumber"=dword:10 "Sysintr"=dword:20 ;force NDIS not ask OEM layer for Sysintr and use registry value instead "IoBaseAddress"=dword:0C000000 [HKEY_LOCAL_MACHINE\Comm\LAN90001\Parms\TcpIp] "EnableDHCP"=dword:1 ;<======== set to 1 if DHCP enabled. "DefaultGateway"="" ;(contd) If set to 0 then enter the values next entries "UseZeroBroadcast"=dword:0 "IpAddress"="10.0.0.1" "Subnetmask"="255.255.255.0" [HKEY_LOCAL_MACHINE\Comm\Tcpip\Linkage] "Bind"=multi_sz:"LAN90001" Which wrong? Thanks, JLL Tag: Flash player problem Tag: 44268
 - 20
 - Implement OEMWriteDebugString to write to a file I have a file system on an external storage card that is mounted as root. I would like to redirect everything sent to OutputDebugString to a file on that card. Is it possible to implement OEMWriteDebugString so it writes debug output to a file my storage card? How would I do that? Tag: Flash player problem Tag: 44266
 - 21
 - Access violation exception in stream interface driver Iam writing a stream interface driver in windows CE. In my driver, i have an instance of a local vaiable (of some structure type)in one of the functions and its address is put in a linked list.The node in the linked list is used by another thread to share some data and notfication back to the prevoius function , where the previous function is waiting for indication using WaitForSingleObject. I can successfully retreive the node of the linked list from the other thread and access the fileds of the structure. The problem is if i try to pass the stucture ptr to some other function , an exception of type "access vioalation " happens. The same part works fine in desktop. This problem is not found when i allocate that local variable dynamically. can anyone help me to know what would be the reason for such a bahavour TIA gomas Tag: Flash player problem Tag: 44265
 - 22
 - KITL connection problem I have been trying like heck to get a Ether KITL connection to our Xscale device. I was successful getting the serial KITL to work. I am using a standard NE2000 PCMCIA 10MBS Ethernet card. I can see the target emit the (i assume) correct UDP connection packet. The source MAC is correct for the NE2000 card and the dest is FF FF FF FF FF i.e. broadcast. The small data in the payload also looks correct ... EDBG.. 00000000 FF FF FF FF FF FF 00 C0 1B 00 95 2A 08 00 45 00 ...........*..E. 00000010 00 44 04 00 00 00 40 11 B5 FF C0 A8 00 02 FF FF .D....@......... 00000020 FF FF 03 D5 03 D5 00 30 62 00 45 44 42 47 FF 00 .......0b.EDBG.. 00000030 00 09 20 00 41 00 58 53 43 31 42 44 33 38 31 38 ....A.XSC1BD3818 00000040 36 00 00 00 00 00 C0 A8 00 02 00 C0 1B 00 95 2A 6 ..............* 00000050 03 D5 .. I also verified the host port is open and listening on port 981 .. PB shows .. "Kernel debugger is waiting to connect with target." ... nothing happens. I never get any response from the host (XP with 905 lan card). It appears like the PC host is just plane ignoring this packet or for some reasion PB is not responding. I do not have a "known good" refference platform so I do not know what a "good" response should look like. Does anyone know?? I know the connection works otherwise as I am downloading the image to RAM using the same connection and it works just fine (socket connection tftp download ok). Is there anything else I can try? Is there some debug registry setting where I might be able to get more info in the WinCE Event Log? Tag: Flash player problem Tag: 44258
 - 23
 - Artifacts left on screen while dragging icons around Hi all, It's been awhile since I've written in to the group. I guess that is a good thing on my end because development has been going well. However, I do apologize for being absent for so long. I am having a problem with artifacts being left on the display after dragging icons around, and I'm totally stuck on it. I've dealt with this issue one time before on an SH-based platform. That time it turned out that my frame buffer resided in a cacheable memory area. Therefore, writes to the frame buffer were being cached and the screen wasn't always being updated correctly. This platform is ARM-based, a Sharp LH7A400 with a 922T-core is the CPU. I have made sure that the frame buffer is non-cacheable by using the following call to map it: frame_buffer = MmMapIoSpace(phy_addr, size, FALSE); I know that the screen artifacts are _not_ due to a hardware problem. I've verified this by using the Remote Zoom-in tool to check the contents of the frame buffer. The artifacts are in fact in the frame buffer as evidenced by the fact that they show up on the bitmap downloaded using this tool. I've also tried different formats (16 and 8 Bpp). Both of them show the same artifacts. I've even moved the frame buffer from system SDRAM into the CPU's embedded SRAM just in case there was a timing issue but that didn't work either. The display driver is very simple, it's all based on the GPE classes and I've disabled any and all of the emulation accelerated blits. For instance, ENABLE_TEXT_EMULATION, ENABLE_FILL_EMULATION, etc. I've searched all of the past posts in the newsgroup and didn't find anything useful, so I'd like to ask if anyone has any advice on where to go from here. Any and all comments are greatly appreciated. Thanks, --kermit -- It wasn't easy being Greazy ....but it was interesting. Tag: Flash player problem Tag: 44245
 - 24
 - LNK1166 Hi all, during the build of a 4.2 image for my device, I get the following warnings, when linking the kernel: c:\wince420\platform\mpii\kernel\buildexe\kern\nk.lib (schedule.obj) : warning LNK1166: cannot adjust code at offset=0x00001000, rva=0x00022B78 c:\wince420\platform\mpii\kernel\buildexe\kern\nk.lib (kmisc.obj) : warning LNK1166: cannot adjust code at offset=0x00001000, rva=0x0003F7EC c:\wince420\platform\mpii\kernel\buildexe\kern\nk.lib (loader.obj) : warning LNK1166: cannot adjust code at offset=0x00001000, rva=0x000525AC Has anybody an idea, how I can avoid these warnings? Is this image ready to run? Thanks for every tip... Detlef Tag: Flash player problem Tag: 44244
 - 25
 - Geode GX1 Audio problem In PB 4.2 I have re-builded the Geode/MediaGX Audio (Unified) feature and for some reason now the PB will not brake into the file duraudio.c file during boot. It seems that the gxuamaud.dll is not loaded?? Any suggestions? Regards Tag: Flash player problem Tag: 44240

I have built a WinCE.net 4.2 image for an x86, Internet
Appliance platform, using Platoform builder. I am trying
to install Macromedia Flash player in IE but it fails.

Any clues how to solve this problem?

Thanks in advance
Rahul

Top

Re: Flash player problem by Paul

Paul
Wed Nov 12 08:56:15 CST 2003

What do you mean by "installing" it? You can't download the player for
desktop Windows and expect it to work in Windows CE; you need the Windows CE
version. As I understand it, you must contact Macromedia and buy it...

Paul T.

"Rahul" <anonymous@discussions.microsoft.com> wrote in message
news:0ecf01c3a902$c8686760$a101280a@phx.gbl...
> I have built a WinCE.net 4.2 image for an x86, Internet
> Appliance platform, using Platoform builder. I am trying
> to install Macromedia Flash player in IE but it fails.
>
> Any clues how to solve this problem?
>
> Thanks in advance
> Rahul
>

Top