Flash demo on EZPAD with CE 4.10?

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - How to write File system filter driver on Windows CE 5.0 Hi there, I am having USB Mass storage feature working on my target (Windows CE 5.0). Also I have boot partition and support for Hive based registry working. I have totally 3 partitions on my internal flash card. ( BINFS partition where in I have stored NK.bin and 1st DOS32 partition has been mounted as root and 2nd DOS32 partition is used for user data storage. I want to expose 2nd DOS32 parition as mass storage. (i.e. Selective partition exposure). Following post says there are couple of ways of doing it. One of them is writing file system filter. http://groups.google.co.in/group/microsoft.public.windowsce.platbuilder/browse_thread/thread/18759b99fcc05bf2/de2258cfaacf12c4?hl=en&lnk=st&q=Selective+partition+exposure#de2258cfaacf12c4 Is there any reference file system filter available in Windows CE 5.0? Any inputs will be helpful! Thanks in advance! Tag: Flash demo on EZPAD with CE 4.10? Tag: 112371
  - 2
    - Error 4309 returned when writing files Hello, We have a WinCE 5.0 Core system running on a 1 Ghz x86 platform. The hard disk drive is set up as a CF card. Our program previously ran on WinCE 4.x with no problems, but now we repeatedly get errors when writing to the disk drive. GetLastError() returns 4309 (resource required). I suspect there is some security issue. We have the NoDefaultUser registry setting set to 0 by default. The platform was started from an internet appliance base and we have omitted all items we dont use in order to adhere to the core licensing agreement. We have no use for any "user" security. We need to be certain it is defeated, yet I haven't yet determine a successful solution. Any suggestions would be appreciated. Thanks, Ken Tag: Flash demo on EZPAD with CE 4.10? Tag: 112361
  - 3
    - IRQ_BULVERDE_MAX CE 6.0 Question Hey all, I am porting a 270 based platform from CE 5.0 to CE 6.0 and have found a discrepancy with the defined value of IRQ_BULVERDE_MAX between the two versions. In CE 5.0 it is defined as follows... #define IRQ_BULVERDE_MAX IRQ_RTCALARM ...where IRQ_RTCALARM = 31. In CE 6.0 it is defined as follows... #define IRQ_BULVERDE_MAX 63 //icmr (32) + icmr2 (32) Is there a reason this was changed? I am defining additional platform specific IRQ values based off of the IRQ_BULVERDE_MAX value, but this paradigm is broken in CE 6.0 because the OALIntrStaticTranslate() routine (common lib, map.c) is comparing against the OAL_INTR_IRQ_MAXIMUM value which is defined as 64 for both versions. What this causes is the IRQ translation in CE 6.0 to be skipped because the compare fails, which in turn causes the SYSINTR to be mapped to the IRQ init value of -1 and then breaks IRQ dependent drivers. Obviously, I can manage to work around the issue, but I just wanted to get the reasoning behind the change to IRQ_BULVERDE_MAX. Tag: Flash demo on EZPAD with CE 4.10? Tag: 112350
  - 4
    - how could i save files in windows folder? can i do it on ce5? or ce6? what's the solution? I know windows mobile can do it,3x Tag: Flash demo on EZPAD with CE 4.10? Tag: 112347
  - 5
    - Compact Framework 3.5 CEC file for Windows CE 5.0 wanted Hello there, I would like to update my platform (Windows CE 5.0), but I'm missing the CEC file for Windows CE 5.0 platform builder. The only thing I found was: http://support.microsoft.com/kb/947560/ I've got a licensed Windows CE Platform Builder, a valid product key for "Windows CE 5.0 Pro" & we are producing Windows CE devices. How do I get hands on QFE updates like the Wincepb50-080115-kb947560-armv4i.msi? Thanks, Armin Sczuka Tag: Flash demo on EZPAD with CE 4.10? Tag: 112344
  - 6
    - How to change the screen color? My platform is Windows CE 6.0. I want to change the screen color during Windows CE boot, the default color is black. Is it possible to do that? -- Regards, Goldbach Tag: Flash demo on EZPAD with CE 4.10? Tag: 112334
  - 7
    - How to change the -- Regards, Goldbach Tag: Flash demo on EZPAD with CE 4.10? Tag: 112333
  - 8
    - WinCE Graphics Hi, Can anyone explain me the basic display operations in Wince like BitBlt etc. Also can anyone tell me the benchmark values for time taken by a particular display driver operation like BitBlt, DrawText etc. I mean what should be the ideal time taken by Display Driver for a particular display operation eg. BitBlt. 1) Are these values documented some where? 2) Are these values platform dependent? Thanks in advance. Regards, Ram P Tag: Flash demo on EZPAD with CE 4.10? Tag: 112332
  - 9
    - explorer ? How kill explorer or no loaded explorer (still keep Standard Shell) Tag: Flash demo on EZPAD with CE 4.10? Tag: 112328
  - 10
    - Problem cloning calibrui CE 5.0: I followed the instructions to clone the touch screen calibration CalibrUi, but my changes in the resources and changes to the code are not making it into the build. I don't understand how the clone gets the resources and the compiled code into the build instead of the original copies, so I'm having trouble tracking down why it doesn't work. Can anyone suggest where to look? Tag: Flash demo on EZPAD with CE 4.10? Tag: 112321
  - 11
    - SMDK2440 USBD suspend/resume problem Hi all I am working with smdk2440 bsp. The Activesync works good through usb_serial function driver. The usb don't connect after resuming from suspend state, it seems that the USB device controller does'nt re-initialize after resume. Any hint will be welcome Thanks -- Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200805/1 Tag: Flash demo on EZPAD with CE 4.10? Tag: 112319
  - 12
    - FAT partition Backup/Restore Hi, I need to create a procedure that will allow the user to backup and restore data from the FAT partition available on our CE 5.0 device's internal NAND flash storage. I basically need to create a mechanism that will create a bin file containing all the data- much like the one Norton Ghost creates on a PC. The entire procedure needs to be implemented in the bootloader. Does anyone have any suggestion on what would be the best approach to do the above? Tag: Flash demo on EZPAD with CE 4.10? Tag: 112315
  - 13
    - Block device auto format prompt I have a problem which seems like it should be simple to solve but I can't work it out. I have developed a block device which is designed to store a file system on a file. This file can then be mounted and unmounted programatically to allow the user access to the filesystem. I've used the technique of using a dummy block device which bootstraps the normal FAT FSD, then the block device can be activated and deactived to bring the file system up and down. However the problem I has is that if the file has just been created it isn't formatted, so I need the option of being able to format it. I want a prompt to ask if the device should be formatted, then the user can decided to format or not to format. My registry keys are: [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MyDisk] "Name"="MyDisk" "Folder"="MountedStorage" "AutoMount"=1 "AutoFormat"=1 "AutoPart"=0 "PartitionDriver"="" "DefaultFileSystem"="FATFS" [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MyDisk\FATFS] "Flags"=4 Strangly it use to prompt me before formatting, but after I added the PartitionDriver entry to the registry the original auto format prompt stopped appearing. But without this key the disk was not being formatted correctly and the MBR/Sector 0 didn't appear to be correct. Previously I could set AutoFormat to 1 and the format was silent, or AutoFormat to 0 and the prompt appeared before mounting and formatting. Now all I get is a silent auto format, or nothing at all. This silent autoformat will cause a problem because the software on the PDA is designed to operate with an existing 2K/XP driver. If this file was created on the desktop and formatted as NTFS rather than FAT then clearly I don't just want the PDA to silently reformat the device and lose all the data. Another possibilty might be if I can programatically format the device. But I don't own the fsd driver so I don't know how to ask it to format the file system (e.g. using FSDMGR_FormatVolume), and I can't open the volume and use IOCTL_DISK_FORMAT_VOLUME or IOCTL_DISK_FORMAT_MEDIA because until it is formatted it won't mount so \MountedStorage\Vol: doesn't exist. Can anyone point of a solution to the auto format prompt, or tell me what I am missing with regard to a programatic format? Jamie Tag: Flash demo on EZPAD with CE 4.10? Tag: 112306
  - 14
    - FREEZE/PXA255/WindowsCE 5.0 Hi, I have a COMPULab CM-X255 board with a PXA255 with WindowsCE 5.0. I encounter a FREEZE after several hours/days for abot 19 minutes. afterwards it is running normally. Has anyone experienced the same problem ? Has anyone a solution ? regards, Martin Tag: Flash demo on EZPAD with CE 4.10? Tag: 112305
  - 15
    - IRQ_DMAC and auido Hi, i have an audio and wlan driver using dma. audio is mainstoneii wavedev driver but using i2s port to transfer instead of ac97. using dma channels 1,4 and 2,3 (i2s). wlan is using dma channels 13,14. platform is Ce 5, pxa270 i made a modification in OEMInterruptHandler to seperate them. else if(irq == IRQ_DMAC) { volatile BULVERDE_DMA_REG *g_pDMAReg= NULL; g_pDMAReg = (volatile BULVERDE_DMA_REG *) OALPAtoVA(BULVERDE_BASE_REG_PA_DMAC, FALSE); CLRREG32(&g_pICReg->icmr, (1 << irq)); if (g_pDMAReg->dint & DMA_AUDIO_INTR) { sysIntr = SYSINTR_AUDIO; } else if (g_pDMAReg->dint & DMA_WLAN_INTR) { sysIntr = SYSINTR_SSPC_DMA; } } they both work alone. but together when i play an audio it stucks or logs a crash in device.exe OEMInterruptHandler 0x2002 & DMA_AUDIO_INTR) Data Abort: Thread=83f2e240 Proc=81c26300 'device.exe' AKY=ffffffff PC=03fc3994(coredll.dll+0x00053994) RA=033c32a4(wavedev.dll+0x000032a4) BVA=0650fe68 FSR=000004f6 . do you have any suggestion to fix this. Thanks Alli Tag: Flash demo on EZPAD with CE 4.10? Tag: 112303
  - 16
    - How does code in PRIVATE folder get reflected in the final NK.bin Hi, I recently installed the Dec07 cumulative update. In this update there are changes to source code in the PRVATE folder. Also I had a look in the PUBLIC\COMMON\OAK\LIB\ARMV4I folder and found that there are libs present correspondign to some components that have changed in the PRIVATE folder. I could not find all the libs corresponding to all the changed components. So, my question is, will it be fine if I do not install the PRIVATE source code? Is it OK if I get the updated libs in PUBLIC folder only and then build an image? What is the general procedure for including the PRIVATE folder source code into the NK.bin? I dont think the PRIVATE folder would be built ever, instead the corresponding libs from PUBLIC folder woulc be used. Right? - Varun Tag: Flash demo on EZPAD with CE 4.10? Tag: 112299
  - 17
    - pxa270 mainstone 2, ce5.0 usb host hello, I want to turn off the over current protection support in the usb host. I looks like even if I turn it off in PDD, it's somehow turned back on again in MDD. how can I tell the MDD that I am not supporting over current protection? Tag: Flash demo on EZPAD with CE 4.10? Tag: 112295
  - 18
    - What is the reason that trigger the "Network and Dial Up Connections UI"? My WINCE5 device always popped up a dialing dialog just a while after startup. The dialog is the "Network and Dial Up Connections UI". If I set following item in register: [HKEY_CURRENT_USER\ControlPanel\Comm] "AutoCnct"=dword:0 then the dialing dialog will not be showed, but another dialog popped up. The tilte is "communication error" ,and the dialog said that it can not start the communication with PC, and the error number is 608 ... The device did not show the dialog before, and I have not changed the components of OS for a long time. Yes ,there is IE component in the OS which is the dependency of .NET2 , but there is no network service should be started at startup, and I have installed all QFE . Any advice? Thanks. Tag: Flash demo on EZPAD with CE 4.10? Tag: 112294
  - 19
    - pxa255 and the sdram problem dear all, since I posted several days ago about 128 sdram configuration, I did not work it out anymore,there must be some mistakes i have not found yet,so i need u help guys.. okay,the platform is following: CPU : Xscale pxa255 OS : Windows CE .Net 4.2 Flash : 32MB SDRAM : 128MB (32MBX4) well,to configure my 128M sdram,I modified some files below: F:\WINCE420\PLATFORM\XSBase255\INC memmap.inc F:\WINCE420\PLATFORM\XSBase255\INC memdefs.h F:\WINCE420\PLATFORM\XSBase255\FILES config.bib F:\WINCE420\PLATFORM\XSBase255\INC xsc1.inc xsc1.h xsc1bd.inc xsc1bd.h F:\WINCE420\PLATFORM\XSBase255\KERNEL\HAL\ARM fwxsc1.s when all of modifies had done,I download the NK.bin, and the debug information shows: rom_offset=0x0. Found pTOC signature. ROMHDR at Address 800B8044h RomHdr.ulRAMStart=81C50000h RomHdr.physfirst=800B8000h. Done. Writing 0x80076BD8 to flash address 0xB8340000 (length=0xA40). Sector=0x200 (Length=0x6) Block=0x1 (Length=0x1). Handling non-block aligned data... FlashErase: Unlocking flash block(s) [0x1, 0x1] (please wait): Done. Erasing flash block(s) [0x1, 0x1] (please wait): .Done. Writing to flash (please wait): Done. Got EDBG_CMD_JUMPIMG Got EDBG_CMD_CONFIG, flags:0x00000000 Download successful! Jumping to image at physical 0xA00B9000... Begin ****************************************************** ****************************************************** ****************************************************** ****************************************************** ****************************************************** OEMInitDebugSerial using UART2 Windows CE Kernel for ARM Built on Mar 13 2003 at 22:54:19 ProcessorType=02d0 Revision=6 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 800b9ef4 as u see,my system hung at last, if in normal,sp=ffffc7cc should be printed behind OEMAddressTable = 800b9ef4 but now,system hung there.... could u give me some suggestions? thank u in advance. Tag: Flash demo on EZPAD with CE 4.10? Tag: 112292
  - 20
    - Help with PartitionTable Hello, I have an x86 WinCE50 system that uses the ATAPI IDE driver for a system CF card. Currently, I have the CF card partitioned into 2 parts: *Partition1 = Fat16 bootable partition with CEPC Nk.bin *Partition2 = TFAT formatted partition for WinCE use. I am currently trying to mount the partition 2 as root, but having no luck at all. I have tried the following approaches. 1) Use MountAsRoot and AutoMount keys for partitions to set which should mount as root, making sure to set Part1 MountAsBootable=0 so it does not think system/hive files are on the drive. Result: Partition 1 still mounts to root. This seemed to have no effect. Maybe I am messing up the way I use the Profile? (HDProfile \Part00\ see my reg below)? 2) Use the 'cheating' method to set the PartitionTable key 0x04 to invalid FS. (suggested here: http://groups.google.com/group/microsoft.public.windowsce.platbuilder/browse_thread/thread/e122bf548aab3c7c/c61f11d3a810184f) [HKLM\System\StorageManager\PartitionTable] "04"="SYSBOOT" Result: Both partition 1 and 2 do not mount and the system halts after storage manager. To my understanding, the first partition formatted in FAT16 is 0x04. However, shouldn't my TFAT partition be type x0B (MS-DOS 32 bit FAT)? Perhaps I am wrong in my assumptions of how the PartitionTable works. 3) Setting the "PartitionDriverName" to blank in an attempt to load null partition driver [HKLM\System\StorageManager\Profiles\HDProfile\Part00] "PartitionDriverName"="" [HKLM\System\StorageManager\Profiles\HDProfile\Part01] "PartitionDriverName"="MSPART" Result: Both partitions still loaded. Here is where I am at stuck. Can anyone offer advice or help? Thanks in advance -t Below are my current registry settings - some may have been enabled/ disabled per the 3 steps above (which I tried one at a time). [HKLM\System\StorageManager\Profiles\HDProfile] "MountAsRom"=dword:0 "MountAsRoot"=dword:0 "MountAsBootable"=dword:0 "MountPermanent"=dword:0 "Flags"=dword:00080064 [HKLM\System\StorageManager\Profiles\HDProfile\FATFS] "MountAsRom"=dword:0 "MountAsRoot"=dword:0 "MountAsBootable"=dword:0 "MountPermanent"=dword:0 "Flags"=dword:00080064 [HKLM\System\StorageManager\Profiles\HDProfile\Part00] "AutoMount"=dword:0 "AutoFormat"=dword:0 "AutoPart"=dword:0 "DefaultFileSystem"="FATFS" ; "PartitionDriver"="mspart.dll" "PartitionDriver"="" "MountAsRom"=dword:0 "MountAsRoot"=dword:0 "MountAsBootable"=dword:0 "MountPermanent"=dword:0 "Flags"=dword:00080064 [HKLM\System\StorageManager\Profiles\HDProfile\Part01] "AutoMount"=dword:1 "AutoFormat"=dword:0 "AutoPart"=dword:0 "DefaultFileSystem"="FATFS" "PartitionDriver"="mspart.dll" "MountAsRom"=dword:1 "MountAsRoot"=dword:1 "MountAsBootable"=dword:1 "MountPermanent"=dword:0 "Flags"=dword:00080064 Tag: Flash demo on EZPAD with CE 4.10? Tag: 112290
  - 21
    - Help with PartitionTable Hello, I have an x86 WinCE50 system that uses the ATAPI IDE driver for a system CF card. Currently, I have the CF card partitioned into 2 parts: *Partition1 = Fat16 bootable partition with CEPC Nk.bin *Partition2 = TFAT formatted partition for WinCE use. I am currently trying to mount the partition 2 as root, but having no luck at all. I have tried the following approaches. 1) Use MountAsRoot and AutoMount keys for partitions to set which should mount as root, making sure to set part1 MountAsBootable=0. [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile \Part00\FATFS] "AutoMount"=dword:0 "MountAsRoot"=dword:0 "MountAsBootable"=dword:0 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile \Part01\FATFS] "AutoMount"=dword:1 "MountAsRoot"=dword:1 "MountAsBootable"=dword:1 Result: Partition 1 still mounts to root. This seemed to have no effect. Am I messing up the way I use the Profile? (HDProfile \Part00\FATFS)? 2) Use the 'cheating' method to set the PartitionTable key 0x04 to invalid FS. (suggested here: http://groups.google.com/group/microsoft.public.windowsce.platbuilder/browse_thread/thread/e122bf548aab3c7c/c61f11d3a810184f and by others as well): [HKEY_LOCAL_MACHINE\System\StorageManager\PartitionTable] "04"="SYSBOOT" Result: Both partition 1 and 2 do not mount and the system halts after storage manager. To my understanding the first partition formatted in FAT16 is 0x04. However, shouldn't my TFAT partition be type x0B (MS-DOS 32 bit FAT)? Perhaps I am wrong in my assumptions of how the PartitionTable works. 3) Setting the "PartitionDriverName" to blank in an attempt to load null partition driver [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile\Part00] "PartitionDriverName"="" [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile\Part01] "PartitionDriverName"="MSPART" Result: Both partitions still loaded. Here is where I am at stuck. Can anyone offer advice or help? Thanks in advance -t Below are my current registry settings: [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile] "MountAsRom"=dword:0 "MountAsRoot"=dword:0 "MountAsBootable"=dword:0 "MountPermanent"=dword:0 "Flags"=dword:00080064 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile\FATFS] "MountAsRom"=dword:0 "MountAsRoot"=dword:0 "MountAsBootable"=dword:0 "MountPermanent"=dword:0 "Flags"=dword:00080064 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile\Part00] "AutoMount"=dword:0 "AutoFormat"=dword:0 "AutoPart"=dword:0 "DefaultFileSystem"="FATFS" ; "PartitionDriver"="mspart.dll" "PartitionDriver"="" "MountAsRom"=dword:0 "MountAsRoot"=dword:0 "MountAsBootable"=dword:0 "MountPermanent"=dword:0 "Flags"=dword:00080064 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile\Part01] "AutoMount"=dword:1 "AutoFormat"=dword:0 "AutoPart"=dword:0 "DefaultFileSystem"="FATFS" "PartitionDriver"="mspart.dll" "MountAsRom"=dword:1 "MountAsRoot"=dword:1 "MountAsBootable"=dword:1 "MountPermanent"=dword:0 "Flags"=dword:00080064 Tag: Flash demo on EZPAD with CE 4.10? Tag: 112289
  - 22
    - USB Wireless Network Adapters for WinCE? I am currently trying to added wireless support to an existing WinCE OS image. I have added the components to my OS image to support Wi-Fi in Platform builder. I need help trying to find a compatible USB wireless network device that works with WinCE 5.0. My current WinCE OS image is working with the RNDIS USB driver, and I have read the previous posts on the USR5421 Wireless MAXg USB Adapter that is RNDIS complient. The problem is that I don't won't to limit the my customer to using only one type of USB Wireless Network manufacture. Does anyone have a list of USB wireless network devices that is compatible with WinCE 5.0? Tag: Flash demo on EZPAD with CE 4.10? Tag: 112286
  - 23
    - running Microsoft Device Emulator from "Device Emulator Manager" I used PB 5.0 to build an emulator using Microsoft Device Emulator, then I built the SDK. Now I am trying to run it from "Device Emulator Manager" in Visual Studio, I can see it - but its more like a category - the devices I can click are sub items in the category "Pocket PC 2003" for example, but I cannot right click on it to connect. Please help, thanks patrick Tag: Flash demo on EZPAD with CE 4.10? Tag: 112283
  - 24
    - ndis miniport wakeup filter Hi everybody, is there any way to control the wakeup packet filter ? Currently my miniport receives a OID_PNP_ADD_WAKE_UP_PATTERN with a filter pattern. I don't know where it comes from; I presume from protocol driver. I would like to configure or explicity send my specific wakeup packet filter. Best regards, PaoloC Tag: Flash demo on EZPAD with CE 4.10? Tag: 112280
  - 25
    - CreateEvent and SetEvent in WinCE6.0 Hi, I am a newbie to Windows Embedded CE. Try to understand Embedded :) I have a wince 5.0 based Application which creates a unnamed event and sends an IOCTL to driver. Upon completion of requested IO, driver uses setevent on event handle passed by APP. The whole thing works fine on WinCE 5.0 Now I have this driver in wince6.0 for a different platform, when i run the APP (built using wince 5.0), i see exception "Abort data" in driver (setevent, driver built using wince 6.0) using unnamed events is not allowed in WinCE6.0? If so, is there a work around for this instead of using named events? Any information on this would be of great help --Thanks in advance Vikranth Tag: Flash demo on EZPAD with CE 4.10? Tag: 112272
- Next
  - 1
    - DDKReg_GetWindowInfo() returns ERROR_INVALID_PARAMETER Hi all, I have written a simple device driver that is loaded at boot time. The driver needs to read MemBase and MemLen from the registry when initialised. I use the pointer that I receive in XXX_Init( PVOID Context) to open the device key ( hnd = OpenDeviceKey( (LPCTSTR)Context ); ) and that seems to work. However, when I call DDKReg_GetWindowinfo() with the returned handle it returns ERROR_INVALID_PARAMETER. According to MSDN this "Indicates a problem with the populated DDKWINDOWINFO structure." What does this mean? My registry entry looks like this: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\GDU] "MemBase"=dword:40100000 "MemLen"=dword:40 "Prefix"="GDU" "Dll"="gdudev.dll" "Order"=dword:22 Any ideas are much appreciated. Thanks, Rickard Tag: Flash demo on EZPAD with CE 4.10? Tag: 112271
  - 2
    - Wi-Fi Authentication Test... hi! I was checking the wifi authentication test.(I am using WinCE 6.0) Here when i checked the Prerequisites for authentication tests, it requires. Tux.exe kato.dll Authmatrix.dll Enroll.exe Netall.dll Apcontrol.exe I am able to find every thing except Apcontrol.exe Can any one say where i can find this application. Thanks. Tag: Flash demo on EZPAD with CE 4.10? Tag: 112270
  - 3
    - Ethernet Throughput Too Slow for Wince 5.0 I am running wince 5.0 with an AMD AU1100 processor running at 396MHz. I am integrating a RTL8305SC ethernet switch within the hardware platform. I am currently getting around 16.5 Mbps throughput uploading a 40Meg file to a server, and 23.5Mbps downloading a file from a server. This seems extremely slow for WinCE 5.0. On the desktop I can get almost 80% of the 100MBps link speed. Is the ndis.dll driver at a low priority such that it is not able to buffer up packets and send them out faster than the current rate I am experiencing? How can I speed up the throughput? Tag: Flash demo on EZPAD with CE 4.10? Tag: 112250
  - 4
    - WLAN sample code Hi all, Is any WLAN Driver Sample code is available on net? or any body know from where i take reference for WLAN Driver. I am using Wireless CF card on WINCE 5.0. I required sample code for that. So please if any body know then help us. Thanks in advance Swapnil Tag: Flash demo on EZPAD with CE 4.10? Tag: 112244
  - 5
    - How to strip down image of headless device (no display)? Hi, I would like to get rid of many unneeded components for a headless device. However, I cannot uncheck many catalog items because the Platform Builder thinks it is needed. For example: how can I get rid of the Tahoma fonts? Is there any method for this or do I have to apply brute force such as modifying common.bib? Thank you, Peter Tag: Flash demo on EZPAD with CE 4.10? Tag: 112241
  - 6
    - ConnMgrRegisterForStatusChangeNotification - #include <connmgr_status.h> problem Hi all, I have subroject where I would like to use "ConnMgrRegisterForStatusChangeNotification" which is declared in connmgr_status.h (according to MSDN). Ther is no such file in WINCE600 folder structure. None of files contains declaration of "ConnMgrRegisterForStatusChangeNotification". I see that it is delay loaded from cellcore.dll (public\cellcore\simtkit\dllload.cpp). I have checked cellcore.dll (ARM emulator build) (using dependancy walker - depend.exe) but it does not export "ConnMgrRegisterForStatusChangeNotification" function. I have installed "Shared source, ARMV4I and X86" OS. Subproject build fails with error: Error 6 fatal error C1083: Cannot open include file: 'connmgr_status.h': No such file or directory. How to use it in WinCE 6? Zdenko Tag: Flash demo on EZPAD with CE 4.10? Tag: 112234
  - 7
    - SD card and File System in WinCE 5....? Hi all I am developing SD card driver (SD Host,SD Bus, SD Client), the SD Bus and SD Client Drivers are got from \PUBLIC\COMMON\OAK\DRIVERS\SDCARD\... Now ,I am facing a serial problem, and have no idea to solve it. The condition is: When system suspend and resume , we dont want unload and reload SD Cleint Driver,the reason is if the App is running and read/write data from/to SD card, we hope the App is keeping running, not broken by resume system.(Unload or reload will cause system to broadcast a device changed message, we dont want to get it) In SD host driver,my method is when system resume ,I call the function SDHCDIndicateSlotStateChange(m_pHCContext, 0, SlotResetRequest); And I do a test , that is "I do a file copy/paste by File Explore", but it always failed. I check the data of SD card, it is integrity and identical , nothing lose. And I do other test, that I execute a App(the App is a multimedia tool) to read/write data to SD. When reading/writing from/to SD card, I suspend and resume the system , the App is keeping playing. So I am confused, what happened to it? I really have no idea about it... Could some one help me? ... BRs Jack Tag: Flash demo on EZPAD with CE 4.10? Tag: 112231
  - 8
    - Emulator performances I am experiencing a big difference in performances between a Windows CE emulator image generated by me as part of an SDK and the emulator images provided with the Windows Mobile 6.0 SDK. To be more specific, the problem is related to the startup time of a .NET 2.0 application. The application loads many bitmaps at startup and has a startup time of around a minute in release and two or more minutes in debug on my emulator image. That startup time decreases a bit when I include in the image CF 3.5 instead of 2.0 (the application is still CF 2.0 based) bu it's still twice or more of the amount required to start the same application inside the WM6 emulator, provided with the Windows Mobile 6 SDK. The overral performances of the application inside the WM os image seem to be better than those on my own OS image, but the difference in startup times is quite noticeable. Both OS images use the same amount of memory inside the emulator (256MB) and the amount of free memory before the application is started is the same on both emulator instances and the application allocates the same amount of memory etc. Also the screen resolution is the same on both emulator istances (800x480). My OS image include the .NET framework dependencies, the standard shell and not much more. No services or other applications that may "eat" CPU time in background and no KITL or debugging support. I suppose that the WM6 image runs some more drivers in background (for phone emulation, at least) and that the WM shell is, at least, comparable to the standard shell in terms of CPU and memory usage. My OS image is based on CE 6, while the WM6 image is 5.something, but the new kernel should improve performances... and not having the limit of the 32MB slot may allow the .NET application to allocate more memory without requiring a garbage collector compacting operation, so I expect better performances on my OS image than on the WM6 emulator or, at least, the same level of performances... The application executable is installed in \Program Files so it's loaded from RAM on my OS image and does not access external data files etc. It loads some DLLs (most of them are .NET managed code and native code interaction is limited to some API calls). There are some "tweaks" that can be used to enhance device emulator performances? I used the device emulator BSP provide with CE 6 Platform Builder. There are other releases of that BSP available? Most of my customers still use CE 5, so I don't have a direct comparison of the same application running on the same device on the two OS releases. Someone else noticed big performance issues using the .NET framework on CE 6? -- Valter Minute www.fortechembeddedlabs.it Training, support and development for Windows CE (the reply address of this message is invalid) Tag: Flash demo on EZPAD with CE 4.10? Tag: 112229
  - 9
    - How to test parallel port in WINCE Dear sir, I use X86 architecture which has a parallel port to develop WINCE platform. Do anyone have idea to test parallel port ? BR, Wiles Tag: Flash demo on EZPAD with CE 4.10? Tag: 112215
  - 10
    - RTL 8139 is not working on Wince 5.0 Hello Pls help me if anybody using the rtl 8139 pci card on wince 5.0. Becoz i was tried last 3 weeks, my rtl 8139 card driver is not working. Pls give me the fixed solution . thank you. Tag: Flash demo on EZPAD with CE 4.10? Tag: 112206
  - 11
    - register dumping I'm a begginer to device driver. Now I'm trying to set a gpio register and check if it is set correctly. Following is my code. RETAILMSG(1, (TEXT("v_pIOPregs->GPBCON is %ud - %p\r\n", *(v_pIOPregs->GPBCON), v_pIOPregs->GPBCON))); v_pIOPregs->GPBCON = 0x155555; RETAILMSG(1, (TEXT("v_pIOPregs->GPBCON is %ud - %p\r\n", *(v_pIOPregs->GPBCON), v_pIOPregs->GPBCON))); But the result is not same as my expection. 14034 PID:34c9fc6 TID:34ad6ca v_pIOPregs->GPBCON is 2202309720d - 0 14034 PID:34c9fc6 TID:34ad6ca v_pIOPregs->GPBCON is 2202309720d - 60010 Although I set 0x155555 to GPBCON, the retailmsg printed 60010. What's wrong with my code? Please help me. Tag: Flash demo on EZPAD with CE 4.10? Tag: 112204
  - 12
    - How to add WZC? Hi all, I am using WINCE 5.0 i am working on wireless Prism2 WLAN driver. Normally when i downloaded image(nk.abf) on board and after that when i inserted Wireless Compact Flash Card it ask for "Enter Driver name" when i given "ISLP2NDS.DLL" name Then on Hyper Terminal it shows some msgs are comming and after some time it will stop in taht msg the driver islp2nds.dll is LOADED and after some seconds it is UNLOADED. I don't know due to why it is unloaded driver. I read some posts in that they written Adding WZC support is done by adding the Wireless LAN (802.11)... item from the catalog. All that will do, of course, is add support for it. The second piece is a wireless LAN adapter that supports WZC. CE 5 includes support for several: Cisco 350-series (PC Card), Intersil Prism2 (chipset, usually PC Card), RNDIS (USB). Is any body know how to add WZC in our BSP or in pbxml? and How it will work?? Thanks in advance Swapnil Tag: Flash demo on EZPAD with CE 4.10? Tag: 112199
  - 13
    - Does HyperTerminal support CE6 RDP serial port ? Is there anyone knows that whether HyperTerminal Applet, which is on Windows 2003 RDP server, support RDP serial port redirection application? I connect a RDP session with serial port redirection check box selected, and then open HyperTerminal Applet, set COM2( redirected from terminal device) 9600 bps, data bit:8, Parity:None, stop bits: 1, Flow control: None. Unfortunately, it couldn't work well, it had no response when sending or receiving data. Be surprising, the serial port communication works well with other serial communication tool for test. Could you explain why? Does HyperTerminal Applet not support CE6 RDP serial port ? Tag: Flash demo on EZPAD with CE 4.10? Tag: 112198
  - 14
    - CE6 R2: RDP Licenses problem. Excuse me, I found two RDP license problem in my CE6 R2 image: 1) After RDP client connected to RDP Server (Windows server 2003, and Windows Server 2008), I could not see the Licenses in "Terminal Server Client Licenses" list of control panel. I check the source code of licinfo.cpl, found that the function InitializeLicenseInfo() failed because it called LSInitCertutilLib() and failed. 2ï¿½ï¿½In RDP server, I opened "TS Licensing Manager", the issued Licenses list show the terminal device name is "Unkown". My terminal device has specified name, not "Unkown". Could you help me why they happened? How could I fix up? Tag: Flash demo on EZPAD with CE 4.10? Tag: 112195
  - 15
    - VS2008 PlugIn Hi, do you know if there will be a PB 6.0 Plugin for Visual Studio 2008? Regards -- Javier Grijalba www.contendosystems.com Embedded Systems J.Grijalba at Contendosystems dot com Tag: Flash demo on EZPAD with CE 4.10? Tag: 112194
  - 16
    - CE6 R2: How to restore RDP session password? Excuse me, my CE6 R2 image is Ram-Based, and includes RDP. I set the registry: [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\Terminal Services] "DisablePasswordSaving"=dword:0[HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows NT\Terminal Services] "DisablePasswordSaving"=dword:0 I check the "Save my password" check box when connecting to RDP server. the connection can remember the password and auto-logon next time without reboot. But the RDP session password couldn't be restored after reboot, and I have to retype the password again. By the way, I am sure that I saved the registry before reboot in my own way. The MSDN says that "This build variable, WBT_USEAUTOLOGON, was disabled by default to reduce security risk." So I tried set the WBT_USEAUTOLOGON, and then build and sysgen the image, but still could not restore the password after reboot. Could you give me some advice? Thank you very much. Tag: Flash demo on EZPAD with CE 4.10? Tag: 112192
  - 17
    - Dereferencing environment variables in PB5 Hello, In Platform Builder 5.0 you have a dialog "Platform Settings" where you can also define environment variables. I need to dereference an existing variable. That means I want to define something like TEMP_STORAGE that is defined by the value of the TEMP environment variable. If the TEMP variable is defined as "C:\tmp" the variable should be "C:\tmp\my_storage". You can define this in a batch file with "set TEMP_STORAGE=%TEMP%\my_storage". You can dereference the variable in make files and several Platform Build files in this way: "$(TEMP)\my_storage". But no approach works, neither in Platform Builder GUI nor when opening the command line build window. The existing variable value is never used. How can I use the value of an environment variable to define a new one inside Platform Builder? Best regards, Helge -- Time is an ocean but it ends at the shore. Tag: Flash demo on EZPAD with CE 4.10? Tag: 112191
  - 18
    - ril suspend / resume Hi, I am using the ril driver from the public root, and using wavecom modem... The RIL hang the system on resume.... Any ideas? Best regards, J -- Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200805/1 Tag: Flash demo on EZPAD with CE 4.10? Tag: 112189
  - 19
    - IoBase conflict in seiral port Hi, I test WinCE5.0 at x86 platform. One strange thing in serial port confused me. Per my past experience , serial driver get IoBase address according to the IoBase value in platform.reg. [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial2] "SysIntr"=dword:14 "IoBase"=dword:02F8 But, when I adjust IO address of COM2 to 3F8h (another value) in BIOS setup, COM2 still can work. Right now, the IoBase in BIOS setup conflicts with IoBase value in platform.reg. I didn't modify platform.reg. Why serial port can work well ? thanks Rick Tag: Flash demo on EZPAD with CE 4.10? Tag: 112187
  - 20
    - Query on Windows CE Video Renderer related to MaxBackBuffers! Hi All, We developed a hw assisted decode filter which gets connected with the video renderer. We have enabled DirectDraw support in the display driver. We have accelerated blitting for the RGB offscreen surfaces allocated by the display driver. When video renderer uses DirectDraw RGB offscreen surfaces, it is just creating a single surface. Setting the MaxBackBuffers registry does not seem to have any effect on the number of RGB offscreen surfaces created by it. Does Video Renderer use MaxBackBuffers setting at all when it is working in DDraw mode? If not, is there any way to increase the number of RGB offscreen surfaces created for video render so that decoder thread does not get blocked in m_pAllocator->GetBuffer? Regards Tag: Flash demo on EZPAD with CE 4.10? Tag: 112182
  - 21
    - internal serial ports on CE4.2 vs CE5.0 I have a PC-104 RF transceiver plug-in module that requires a normal serial port configuration in order to communicate. I had been using the following serial port setup in my platform.reg for CE4.2: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial5] "SysIntr"=dword:1e "IoBase"=dword:0300 "IoLen"=dword:8 "DeviceArrayIndex"=dword:4 "Prefix"="COM" "Dll"="Com16550.Dll" "Order"=dword:0 "Index"=dword:5 [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial5\Unimodem] "Tsp"="Unimodem.dll" "DeviceType"=dword:0 "FriendlyName"="RF_PORT 5" ;19,200 baud "DevConfig"=hex: 10,00, 00,00, 05,00,00,00, 00,01,00,00, 00,4B,00,00, 00,00, 08, 00, 00, 00,00,00,00 This worked fine in CE4.2, but I can't get the same trick to work in CE 5.0. It appears that, by enabling interrupts to the CE5.0 port, I can transmit, but I cannot receive any information back. Below is the code for the CE5.0 serial ports, COM3 and COM4. COM 3 is a serial port provided on the VersaLogic Python board, I can communicate with a hyperterminal connection fine. COM 4 then is my attempt to construct a serial port for my RF plug-in device: ; COM3 [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial3] "Index"=dword:3 "SysIntr"=dword:13 "IoBase"=dword:03E8 "IoLen"=dword:8 "DeviceArrayIndex"=dword:2 "Prefix"="COM" "IClass"="{CC5195AC-BA49-48a0-BE17-DF6D1B0173DD}" "Dll"="Com16550.Dll" "Order"=dword:0 ; Turn on follows for Installable ISR (isr16550 supporting SOFTWARE FIFO) "Irq"=dword:3 "IsrDll"="isr16550.dll" "IsrHandler"="ISRHandler" [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial3\Unimodem] "Tsp"="Unimodem.dll" "DeviceType"=dword:0 "FriendlyName"="COM3:" ; byte 9 = 0 for NONE, 10 for HDW handshake. Bytes 13-16 control baudrate (reverse order, i.e. 00004b00 = 19.2kb) "DevConfig"=hex: 10,00, 00,00, 05,00,00,00, 00,01,00,00, 00,4B,00,00, 00,00, 08, 00, 00, 00,00,00,00 ; COM4 [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial4] "Index"=dword:4 "SysIntr"=dword:1a "IoBase"=dword:0300 "IoLen"=dword:8 "DeviceArrayIndex"=dword:3 "Prefix"="COM" "IClass"="{CC5195AC-BA49-48a0-BE17-DF6D1B0173DD}" "Dll"="Com16550.Dll" "Order"=dword:0 "Priority"=dword:0 ; Turn on follows for Installable ISR (isr16550 supporting SOFTWARE FIFO) "Irq"=dword:a "IsrDll"="isr16550.dll" "IsrHandler"="ISRHandler" [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial4\Unimodem] "Tsp"="Unimodem.dll" "DeviceType"=dword:0 "FriendlyName"="RF_PORT_4:" "DevConfig"=hex: 10,00, 00,00, 05,00,00,00, 00,01,00,00, 00,4B,00,00, 00,00, 08, 00, 00, 00,00,00,00 I tried with and without interrupts, with and without the "IClass" statement (what is this?), but nothing has worked. Any ideas or assistance would be greatly appreciated. Thanks, Pat Harris Tag: Flash demo on EZPAD with CE 4.10? Tag: 112179
  - 22
    - Mouse pointer in Windows Ce 5.0 Hello, is there a option in Windows Ce 5.0 to change the mouse pointer for the whole system? There has to be a bitmap somewhere, that can be changed before building my run-time-image!?! Any suggestions? Thanks for help. Tag: Flash demo on EZPAD with CE 4.10? Tag: 112177
  - 23
    - new vs. LocaAlloc when determining heap memory size Hi, Using the ToolHelp functions and the Remote Performance Monitor I've been trying to determine the Heap memory size in my application. This does not seem to work when using 'new' to allocate memory from the heap, however when using 'LocalAlloc' I can monitor the changes. What is the difference in using new or LocalAlloc when it comes to the functions described above? In which way can I monitor the heap memory if I use the 'new' operator? Many thanks! // Nicklas Tag: Flash demo on EZPAD with CE 4.10? Tag: 112175
  - 24
    - problem booting a hive based registry Hi all I'm trying to startup a hive based registry on a customer board. I have set everything (i suppose) in common.reg and platform.reg as below ******************************* common.reg: ******************************* ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\init\BootVars] "SystemHive"="system.hv" ; "ProfileDir"="Documents and Settings" "Flags"=dword:1 "Start DevMgr"=dword:1 ; END HIVE BOOT SECTION *********************************** platform.reg *********************************** IF BSP_NAND_FMD ; HIVE BOOT SECTION ; ; Use Device Manager to load the NAND FMD driver as a built-in block driver. ; This can be used for both WinCE and Windows Mobile builds. ; ; Note: We support Windows Mobile Image Update build for SmartPhone, ; and the registry settings below get conflicts with the ones needed by Image Update. ; So we will overwrite them and setup Storage Manager Autoload keys in SmartPhone section ; to load NAND FMD driver as persistent storage during the early boot phases. ; [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\NANDFMD] "Dll"="nandfmd.dll" "Prefix"="DSK" "Profile"="FlashDisk" "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" "FriendlyName"="Freescale NAND Flash Driver" "Order"=dword:1 IF IMGTPC "MemBase"=dword:80000000 "MemLen"=dword:8000000 ; 128 MB of NAND flash on MX31 ADS. "ReservedBlocks"=dword:1 ; Reserve 1 512 kB block for compaction. "CompactionPrio256"=dword:ff "CompactionCritPrio256"=dword:ffffffff ENDIF ; IMGTPC ; Override names in default profile. These settings are also required to ; support the automatic mounting and creation of the "NAND Flash" folder. ; [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\FlashDisk] "DriverPath"="Drivers\\BuiltIn\\NANDFMD" "Name"="NAND FLASH" "Folder"="NAND Flash" "DefaultFileSystem"="FATFS" #if (defined BSP_SMARTPHONE || defined BSP_POCKETPC) "PartitionDriver"="" ; Explicitly specify the use of the TFAT filesystem for NAND flash. ; [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\FlashDisk\FATFS] "Flags"=dword:00000014 "FormatTfat"=dword:1 ; Format partitions to be TFAT "MountAsRom"=dword:0 "MountAsHidden"=dword:0 "MountAsBootable"=dword:1 #endif ; BSP_SMARTPHONE || BSP_POCKETPC ; END HIVE BOOT SECTION ENDIF ; BSP_NAND_FMD Then booting the board I get the following messages ************************************* Debug boot loog ************************************* Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DITRONECASHER\RELDIR\DITRON_TROUBLE_DEBUG\NK.EXE' Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DITRONECASHER\RELDIR\DITRON_TROUBLE_DEBUG\KD.DLL' Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DITRONECASHER\RELDIR\DITRON_TROUBLE_DEBUG\OSAXST1.DLL' Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DITRONECASHER\RELDIR\DITRON_TROUBLE_DEBUG\OSAXST0.DLL' Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DITRONECASHER\RELDIR\DITRON_TROUBLE_DEBUG\HD.DLL' 4294767306 PID:ffdf002 TID:ffdf266 0x8ffdf024: first = 01ce0000, last = 02000000, SharedDllBase = 02100000 4294767327 PID:ffdf002 TID:ffdf266 0x8ffdf024: >>> Loading module coredll.dll at address 0x03F00000-0x03FF2000 (RW data at 0x01FFE000-0x01FFF7A5) Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DITRONECASHER\RELDIR\DITRON_TROUBLE_DEBUG\COREDLL.DLL' 4294767344 PID:ffc4596 TID:ffc4572 0x8ffc4330: >>> Loading module coredll.dll at address 0x03F00000-0x03FF2000 (RW data at 0x01FFE000-0x01FFF7A5) 4294767346 PID:ffc4596 TID:ffc4572 0x8ffc4330: >>> Loading module filesys.exe at address 0x04010000-0x040A5000 Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DITRONECASHER\RELDIR\DITRON_TROUBLE_DEBUG\FILESYS.EXE' 4294767349 PID:ffc4596 TID:ffc4572 0x8ffc4330: CertMod.dll not found, using old OEM Trust Model 4294767357 PID:ffc4596 TID:ffc4572 0x8ffc4330: FileSystem Starting - starting with clean file system 4294767360 PID:ffc4596 TID:ffc4572 0x8ffc4330: FS: initializing ROM/RAM file system 4294767360 PID:ffc4596 TID:ffc4572 0x8ffc4330: SC_CreateAPIHandle: pvData == NULL 4294767360 PID:ffc4596 TID:ffc4572 0x8ffc4330: FS: Registering file system ROM, index 2, flags 0x00000031 4294767360 PID:ffc4596 TID:ffc4572 0x8ffc4330: FS: Mount complete (ROM, index 2, flags 0x00000031) 4294767363 PID:ffc4596 TID:ffc4572 0x8ffc4330: OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35 4294767365 PID:ffc4596 TID:ffc4572 0x8ffc4330: FSVOL: Opening existing volume 4294767367 PID:ffc4596 TID:ffc4572 0x8ffc4330: FSVOL: Volume heap already initialized 4294767367 PID:ffc4596 TID:ffc4572 0x8ffc4330: FSREG: Mounted ROM portion of boot registry 4294767367 PID:ffc4596 TID:ffc4572 0x8ffc4330: FSVOL: Creating clean virtual volume 4294767367 PID:ffc4596 TID:ffc4572 0x8ffc4330: FSVOL: Initializing volume heap 4294767376 PID:ffc4596 TID:ffc4572 0x8ffc4330: FSREG: Mounted RAM portion of boot registry 4294767379 PID:ffc4596 TID:ffc4572 0x8ffc4330: FS: Creating signal event SYSTEM/DevMgrApiSetReady 4294767380 PID:ffc4596 TID:ffc4572 0x8ffc4330: FS: Creating signal event SYSTEM/PowerManagerReady 4294767380 PID:ffc4596 TID:ffc4572 0x8ffc4330: FS: Creating signal event SYSTEM/GweApiSetReady 4294767380 PID:ffc4596 TID:ffc4572 0x8ffc4330: FS: Creating signal event ReleaseFSD 4294767380 PID:ffc4596 TID:ffc4572 0x8ffc4330: FILESYS: Starting storage manager. 4294767387 PID:ffc4596 TID:ffc4572 0x8ffc4330: >>> Loading module fsdmgr.dll at address 0x03C10000-0x03C3E000 (RW data at 0x01FD3000-0x01FD3808) Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DITRONECASHER\RELDIR\DITRON_TROUBLE_DEBUG\FSDMGR.DLL' 4294767389 PID:ffc4596 TID:ffc4572 0x8ffc4330: FS: Registering file system StoreMgr, index 3, flags 0x00000001 4294767390 PID:ffc4596 TID:ffc4572 0x8ffc4330: InitSharedHeap: 48200000 10000 c 4294767390 PID:ffc4596 TID:ffc4572 0x8ffc4330: InitSharedHeap: return 48200060 4294767391 PID:ffc4596 TID:ffc4572 0x8ffc4330: FILESYS: Restarting storage manager. 4294767396 PID:ffc4596 TID:ffc4572 0x8ffc4330: >>> Loading module relfsd.dll at address 0x03DF0000-0x03DFB000 (RW data at 0x01FEB000-0x01FEBADC) Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DITRONECASHER\RELDIR\DITRON_TROUBLE_DEBUG\RELFSD.DLL' 4294767401 PID:ffc4596 TID:ffc4572 0x8ffc4330: FS: Registering file system Release, index 4, flags 0x00000000 4294767401 PID:ffc4596 TID:ffc4572 0x8ffc4330: Mounted ReleaseFSD volume '\Release' 4294767410 PID:ffc4596 TID:ffc4572 0x8ffc4330: size of 'dbglist.txt' = 00000000 4294767411 PID:ffc4596 TID:ffc4572 0x8ffc4330: FS: Mount complete (Release, index 4, flags 0x00000000) 4294767411 PID:ffc4596 TID:ffc4572 0x8ffc4330: FILESYS: Starting device and waiting for boot file system. 4294767417 PID:2ff85dca TID:2ff85da6 0x8ff85b64: >>> Loading module coredll.dll at address 0x03F00000-0x03FF2000 (RW data at 0x01FFE000-0x01FFF7A5) 4294767428 PID:2ff85dca TID:2ff85da6 0x8ff85b64: >>> Loading module pm.dll at address 0x03E90000-0x03EB3000 (RW data at 0x01FF6000-0x01FF6708) Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DITRONECASHER\RELDIR\DITRON_TROUBLE_DEBUG\PM.DLL' 4294767430 PID:2ff85dca TID:2ff85da6 0x8ff85b64: >>> Loading module devmgr.dll at address 0x03EE0000-0x03EF9000 (RW data at 0x01FFC000-0x01FFC6B4) Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DITRONECASHER\RELDIR\DITRON_TROUBLE_DEBUG\DEVMGR.DLL' 4294767432 PID:2ff85dca TID:2ff85da6 0x8ff85b64: >>> Loading module device.exe at address 0x06010000-0x06014000 Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DITRONECASHER\RELDIR\DITRON_TROUBLE_DEBUG\DEVICE.EXE' 4294767436 PID:2ff85dca TID:2ff85da6 0x8ff85b64: InitSharedHeap: 48200000 0 c 4294767436 PID:2ff85dca TID:2ff85da6 0x8ff85b64: InitSharedHeap: return 48200060 4294767437 PID:ffc4596 TID:ffc4572 0x8ffc4330: FS: Waiting for device to signal BootPhase1 completion 4294767441 PID:2ff85dca TID:2ff85da6 0x8ff85b64: *** DLL_PROCESS_ATTACH - Current Process: 0x42, ID: 0x2ff85dca *** 4294767441 PID:2ff85dca TID:2ff85da6 0x8ff85b64: +InitDeviceFileSystems 4294767441 PID:ffc4596 TID:2ff85da6 0x8ff85b64: FS: Registering file system $device, index 5, flags 0x00000001 4294767441 PID:ffc4596 TID:2ff85da6 0x8ff85b64: FS: Registering file system $bus, index 6, flags 0x00000001 4294767441 PID:2ff85dca TID:2ff85da6 0x8ff85b64: -InitDeviceFileSystems: status is 1 4294767441 PID:2ff85dca TID:2ff85da6 0x8ff85b64: >>> Loading module ceddk.dll at address 0x03B50000-0x03B59000 (RW data at 0x01FC7000-0x01FC70C4) Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DITRONECASHER\RELDIR\DITRON_TROUBLE_DEBUG\CEDDK.DLL' 4294767443 PID:2ff85dca TID:2ff85da6 0x8ff85b64: Ceddk!CalibrateStallCounter: Enter 4294767444 PID:2ff85dca TID:2ff85da6 0x8ff85b64: Ceddk!CalibrateStallCounter: Could not find stall counter 4294767444 PID:2ff85dca TID:2ff85da6 0x8ff85b64: Ceddk!BeginCalibration: min(16626) max(18473) 4294767463 PID:2ff85dca TID:2ff85da6 0x8ff85b64: Ceddk!BeginCalibration: Elapsed is 18433 4294767463 PID:2ff85dca TID:2ff85da6 0x8ff85b64: Ceddk!BeginCalibration: Delay is 27 4294767476 PID:2ff85dca TID:2ff85da6 0x8ff85b64: DEVICE!DevloadInit 4294767476 PID:2ff85dca TID:2ff85da6 0x8ff85b64: DEVICE!InitDevices: Root Key is Drivers\BuiltIn. 4294767476 PID:2ff85dca TID:2ff85da6 0x8ff85b64: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\Prefix) returned 2 4294767477 PID:2ff85dca TID:2ff85da6 0x8ff85b64: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\BusPrefix) returned 2 4294767483 PID:2ff85dca TID:2ff85da6 0x8ff85b64: >>> Loading module busenum.dll at address 0x03EC0000-0x03ECA000 (RW data at 0x01FF8000-0x01FF851C) Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DITRONECASHER\RELDIR\DITRON_TROUBLE_DEBUG\BUSENUM.DLL' 4294767489 PID:2ff85dca TID:2ff85da6 0x8ff85b64: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\NANDFMD\BusPrefix) returned 2 4294767489 PID:2ff85dca TID:2ff85da6 0x8ff85b64: >>> Loading module cspddk.dll at address 0x02150000-0x0215D000 (RW data at 0x01E80000-0x01E800B0) Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DITRONECASHER\RELDIR\DITRON_TROUBLE_DEBUG\CSPDDK.DLL' 4294767490 PID:2ff85dca TID:2ff85da6 0x8ff85b64: >>> Loading module nandfmd.dll at address 0x01DA0000-0x01DB4000 Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DITRONECASHER\RELDIR\DITRON_TROUBLE_DEBUG\NANDFMD.DLL' 4294767495 PID:2ff85dca TID:2ff85da6 0x8ff85b64: FLASHDRV.DLL:BuildupMappingInfo() - Enter. 4294767496 PID:2ff85dca TID:2ff85da6 0x8ff85b64: FLASHDRV.DLL:L2P_GetPhysicalSectorAddr() - Secondary table doesn't exist for logical sector 0x0!!! 4294767665 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: >>> Loading module mspart.dll at address 0x03C00000-0x03C0E000 (RW data at 0x01FD1000-0x01FD14AC) Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DITRONECASHER\RELDIR\DITRON_TROUBLE_DEBUG\MSPART.DLL' 4294767667 PID:ffc4596 TID:ffc4572 0x8ffc4330: FILESYS: Starting device and waiting for boot file system. 4294767683 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: Loading partition driver mspart.dll hModule=8FF178C8 4294767683 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: Driver mspart.dll loaded 4294767683 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: Opened the store hStore=000C4DB0 4294767683 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: NumSec=32704 BytesPerSec=512 FreeSec=0 BiggestCreatable=0 4294767683 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: Partition Part00 NumSectors=32702 4294767683 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: MSPART!PD_OpenPartition: dwStoreId=000C4DB0, PartName=Part00 4294767683 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: >>> Loading module fatfsd.dll at address 0x03E30000-0x03E63000 (RW data at 0x01FF2000-0x01FF265C) Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DITRONECASHER\RELDIR\DITRON_TROUBLE_DEBUG\FATFSD.DLL' 4294767689 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: FSD_MountDisk: mounting volumes for hDsk=000C6490 4294767689 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: FATFS!OpenVolume: access time updates disabled 4294767689 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: FATFS!OpenVolume: event logging enabled 4294767689 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: FATFS!OpenVolume: automatic scanning disabled 4294767689 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: FATFS!OpenVolume: write verify disabled 4294767689 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: FATFS!OpenVolume: extra FAT on format disabled 4294767689 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: FATFS!OpenVolume: force write through enabled 4294767689 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: FATFS!OpenVolume: Codepage = 1 4294767689 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: FATFS!OpenVolume: Number of path cache entries = 50 4294767689 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: >>> Loading module diskcache.dll at address 0x03E20000-0x03E29000 (RW data at 0x01FF0000-0x01FF04F4) Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DITRONECASHER\RELDIR\DITRON_TROUBLE_DEBUG\DISKCACHE.DLL' 4294767717 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: CreateCache: Successful. Cache Size: 16 KB, Start: 1, End: 32. 4294767717 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: CreateCache: Successful. Cache Size: 32 KB, Start: 33, End: 32701. 4294767728 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: FATFS!InitVolume: FAT version: 16 4294767728 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: FATFS!InitVolume: Cluster Size (Sectors): 4 4294767729 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: FATFS!InitVolume: TFAT enabled: FALSE 4294767730 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: FS: Registering file system NAND Flash, index 7, flags 0x00000000 4294767730 PID:ffc4596 TID:4ff8afce 0x8ffc76ac: FS: Mount complete (NAND Flash, index 7, flags 0x00000000) The persistent storage media is a NAND that works fine. The mount process seems to be closed but then the FileSys hangs up and never goes on. Please help me to understand better. Any help will be appreciated fabio antonini kasko networks Tag: Flash demo on EZPAD with CE 4.10? Tag: 112173
  - 25
    - Problem in WinCE 6.0 USB Composite Driver I am Porting USB Composite Driver in WinCE 6.0, I am using Two Composite Client Device(Composite Driver Child Device) 1. USB_Serial Client and 2. Mass_Storage_Device Client I can able to get the Mass_Storage_Device, but I am facing problem while using Activesync, when i Connect the USB Client Cable of the WinCE Device to My PC, initially it is detecting the ActiveSync after 10 seconds it is automattically getting disconnected with Error Message AUTORAS:: Dialer notifies: [2] [Dialer Terminate] Endpoint Zero FAILED SETUP udccsr=0x90. Sent STALL But i can able to get both working when i do like this: 1.Disabled ActiveSync in PC. 2.Connected the USB Client Cable of Win CE Device to PC. 3.After the Mass storage Device mounted ,i have enabled the ActiveSync in PC. In this case i am able to get both working, but Why it is(Activesync) getting Terminated, when both(mass storage & Acitvesync) are working simultaneously? Please help me in solving the issue. Thanks in advance. Tag: Flash demo on EZPAD with CE 4.10? Tag: 112170

I wanted to run a flash demo (SWF file) on an EZPAD EP8402 running CE
4.10.
I can't find a version of flash that I can install. Unsuccessfully
tried fpc_ppc_en.cab.
Is this going to be possible or should I give it up?

Thanks
** Posted from http://www.teranews.com **

Top

Re: Flash demo on EZPAD with CE 4.10? by Paul

Paul
Tue May 13 12:30:11 PDT 2008

No, you can't. You have to license that. Contact BSquare.

Paul T.

"Tom" <Tom@nomail.com> wrote in message
news:rvoj245gm8dlvp43qt0dt122hgfp255m3f@4ax.com...
>I wanted to run a flash demo (SWF file) on an EZPAD EP8402 running CE
> 4.10.
> I can't find a version of flash that I can install. Unsuccessfully
> tried fpc_ppc_en.cab.
> Is this going to be possible or should I give it up?
>
> Thanks
> ** Posted from http://www.teranews.com **

Top

Re: Flash demo on EZPAD with CE 4.10? by Valter

Valter
Wed May 14 02:54:07 PDT 2008

Tom <Tom@nomail.com> wrote in
news:rvoj245gm8dlvp43qt0dt122hgfp255m3f@4ax.com:

> I wanted to run a flash demo (SWF file) on an EZPAD EP8402 running
> CE 4.10.
> I can't find a version of flash that I can install.
> Unsuccessfully tried fpc_ppc_en.cab.
> Is this going to be possible or should I give it up?

There is no easy way to install flash player on a WinCE (and not
Windows Mobile) based machine, AFAIK.

But if you plan to use Flash as your main device UI you may consider
Flash Lite that is a version of Flash player meant to be used (and
ported) to embedded devices and may be licensed to run on your
device.

Adobe unveiled plans to port also AIR on the embedded world and
microsoft released (or announced?) a mobile version of Silverlight,
so the situation is changing quickly in this market.

--
Valter Minute
www.fortechembeddedlabs.it
Training, support and development for Windows CE
(the reply address of this message is invalid)

Top