Error: failed PB timebomb check

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - NIC lost after reboot. I have implemented a hard reboot function like this in a aplication SetCleanRebootFlag(); KernelIoControl(IOCTL_HAL_REBOOT, NULL, 0, NULL, 0, NULL); This seems to reboot the CEPC fine, exept that the two network cards are not initialised. If I reboot by switching off and on everyting is ok. I use the CEPC with hive based registy on a x86 with IDE hard drive. The NIC uses the RTL8139 driver. Tag: Error: failed PB timebomb check Tag: 38756
  - 2
    - Urgent - RDP protocol error in CE 4.1 Dear Greats, Already i posted one mail regarding the same below problem. We are using Windows CE Platform builder 4.1 with RDP builded. We are having ThinClient configuration. We leave the RDP connection for more than 9 minutes. Then the RDP session disconnects saying the Session is disconnected due to some protocol error. We have checked that any server side configuration is wrong. With the same server CE 4.0 client is working with our any problem. If their not inputs from Client side to Server side, session is getting closed. This is a big problem. I think, If their is not inputs (Keyboard / Mouse ) from client to server, that client side socket are some thing is getting closed. Is this a bug. can any one help me. This is very urgent. With regards, avkumar Tag: Error: failed PB timebomb check Tag: 38748
  - 3
    - EARN$£$600\week downloading free software http://131695.PlugUsIn4Cash.com We know it sounds TOO good to BE true, but it?s REAL! Our International Technology firm will pay you hard cash each time FREE software is downloaded. Best of all you will only have to download ONE piece of software ONE time for FREE and you can be on your way to earning BIG! FIND OUT MORE BY VISITING http://StevenBrown1.PlugUsIn4Cash.com/ Tag: Error: failed PB timebomb check Tag: 38746
  - 4
    - whether the wince surpport hard disk hi, I am using the pxa255 to develop my platform.Because I want to use the hard disk or CD-Rom as the input peripheral equipment, I am going to add a IDE controller to my hard platform, but I am wondering if the wince4.1 support the file format of hard disk or CD-Rom? If wince4.1 supports the function, how should I write the IDE controller driver,I mean what is the interface of the IDE driver MDD layer and PDD layer ,and if the file system of wince4.1 should be modify to adapt my requirment? Where can I find the driver example of wince4.1? thanks in advance an very much Tag: Error: failed PB timebomb check Tag: 38741
  - 5
    - driver for data acqusition board on PCI bus works in debug kernel, but not in retail kernel Hi, I have successfully wrote and built a stream interface driver that interface with my data acq. board on the PCI of a CEPC. I have been doing all the work in debug version (the driver (dll) and the test program, and the OS). I was able to get everything working. Then I rebuilt the driver in retail mode. And I also built the release version of the kernel. Then when I run my test program, which subsequently tries to open my device using: CreateFile(TEXT("DAC1:"), GENERIC_READ|GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, NULL); It failed. It gives me error code 55. I have attached the system monitor tool from eMVC, and I can see that DAC1 is one of the device on the system. I also put in debug messages in the DAC_Init() of my dll, and I can see that it gets called properly, and does all the IO and memory mapping properly. However, it seems like the problem is with CreateFile(), and somehow it thinks that the device does not exist on the system. Any help would be appreciated. Oh, btw, I'm relying on the PCIbus driver to load my board. It worked perfectly in the debug version. Just when I switch to retail version, it fails. Joseph Tag: Error: failed PB timebomb check Tag: 38734
  - 6
    - CEPC on Secondary IDE Good day, The motherboard I have has a 40pin IDE interface for primary IDE Channel. I have a 44 pin IDE interface on the secondary IDE Channel. How do I configure the CE.Net image to recognize the secondary IDE as a Harddisk inorder for the user to store persistent data? Please advice Thanks Brandon Tag: Error: failed PB timebomb check Tag: 38725
  - 7
    - Problem mapping physical address (0xC0000000) on Arm Integrator hi, I posted this message before (through google) but it's seem like it's appears only on google I can't see it using my newsreader so I repost it again here it's go : I have a device with memory registers in physical address 0xc0000000, for which I am porting a driver from Linux to CE 4.2 using PB. The device is connected to the logic module stack on an Arm Integrator board running ARM920T CPU. I have tried mapping this memory into virtual address using the following: .... addr = 0xc0000000; PHYSICAL_ADDRESS mapped, port = {addr, 0}; ULONG inIoSpace = 0; PUCHAR ioPortBase; if (!TransBusAddrToVirtual(Internal, 0, port, size, &inIoSpace, &mapped)) printf("Error translating I/O Ports.\r\n"); ... Debugging into TransBusAddrToVirtual showed that the debugger was disconnected inside the call for VitualCopy (in MmMapIoSpace). The Linux driver maps (by ioremap) and uses this address successfully. Does anyone know what could be causing this problem? I tried also to statically map this address by modifying OEMAddressTable (after finding out that CreateStaticMapping function isn't implemented on Arm), but couldn't access VA_TEST. ... VA_TEST EQU 0xa5000000 ;first availble after VA_SC_BASE EXPORT OEMAddressTable[DATA] OEMAddressTable ... DCD VA_TEST, 0xc0000000, 1 ... ; ; End of Table (MUST BE ZERO!) ; DCD 0, 0, 0 AFAIK, there is no need for static mapping, using TransBusAddrToVirtual should do the job for any user-mode driver. Any help will be appreciated, Ilya. Tag: Error: failed PB timebomb check Tag: 38713
  - 8
    - Unexpected GPEBltparms I'll throw this out to see if anyone has comments. The two arrows use for forwards and backwards in the windows explorer generate 1bpp-source blts on my 16-bpp video driver. What tripped me up was that they generate a rop4 of 0xb8b8 which is PSDPxax but the brush pointer is NULL. I was thinking that checking the brush pointer for NULL would limit me to the rop4 codes that don't involve a brush, but evidently not. What is the assumed brush if one is not given as part of the GPEBltParms structure ? Tag: Error: failed PB timebomb check Tag: 38705
  - 9
    - SOURCES Linker HI I have built a dll using the platform builder wizard (pbp file). Project-Settings then select the Link Tab, and in the box labeled Project Options I have the following commctrl.lib coredll.lib bcrapi.lib /nologo /base:"0x00100000" /stack:0x10000,0x1000 /entry:"_DllMainCRTStartup" /dll /incremental:no /pdb:"sa1100rel/BCRhandler.pdb" /debug /nodefaultlib:"$(CENoDefaultLib)" /out:"sa1100rel/BCRhandler.dll" /implib:"sa1100rel/BCRhandler.lib" /subsystem:$(CESubsystem) /align:"4096" /MACHINE:ARM /SECTION:shared,rws I can now build the same dll using Sources file. I can't figure out how to add /SECTION:shared,rws to my sources files, this is absoulutly necessary if the code is to work. I have tried adding the following to the sources but it doesn't have the desired affect CDEFINES= $(CDEFINES) /DBCRHANDLER_EXPORTS SECTION:shared,rws or CDEFINES= $(CDEFINES) /DBCRHANDLER_EXPORTS /DSECTION:shared,rws Regards Tariq Tag: Error: failed PB timebomb check Tag: 38679
  - 10
    - SOURCES HI I have built a dll using the platform builder wizard (pbp file). Project-Settings then select the Link Tab, and in the box labeled Project Options I have the following commctrl.lib coredll.lib bcrapi.lib /nologo /base:"0x00100000" /stack:0x10000,0x1000 /entry:"_DllMainCRTStartup" /dll /incremental:no /pdb:"sa1100rel/BCRhandler.pdb" /debug /nodefaultlib:"$(CENoDefaultLib)" /out:"sa1100rel/BCRhandler.dll" /implib:"sa1100rel/BCRhandler.lib" /subsystem:$(CESubsystem) /align:"4096" /MACHINE:ARM /SECTION:shared,rws I can now build the same dll using Sources file. I can't figure out how to add /SECTION:shared,rws to my sources files, this is absoulutly necessary if the code is to work. I have tried adding the following to the sources but it doesn't have the desired affect CDEFINES= $(CDEFINES) /DBCRHANDLER_EXPORTS SECTION:shared,rws or CDEFINES= $(CDEFINES) /DBCRHANDLER_EXPORTS /DSECTION:shared,rws Regards Tariq Tag: Error: failed PB timebomb check Tag: 38675
  - 11
    - DLL build problem hi all, I'm trying to make a DLL having a couple of methods and returning an integer value to my caller application. It should work in my Win CE.NET 4.2 device under ASP web pages. I haven't been able to make this work. Thus need help. First I used eVC++ 4.0 to create the DLL and downloaded it to my device, after which the LAN drivers mystically disappeared from my device and I was not able to test the ASP site. Additionally, the device hung after a few seconds. I also tried to reconstrct the DLL project in Platform Builder 4.2 by inserting a new empty DLL project and recreating the same files that I used in my eVC++ project. This however gave and error message like ... oleidl.idl Error PB2505: Error executing midl.exe. and I have no idea of how to fix this. It must have something to do with the .idl file, but dunno what. Please help me with one of my problems. Mike Tag: Error: failed PB timebomb check Tag: 38665
  - 12
    - SOURCES Hi I am building a retail build, but it would be useful if I could modify the SOURCES file for one of the components to force it to build a debug version of itself. Is there any way I can do this. I have tried using the following CDEFINES= $(CDEFINES) -D_DEBUG in the sources file but it still builds a retail version of the dll. Any advice would be appreciated Regards Tariq Tag: Error: failed PB timebomb check Tag: 38660
  - 13
    - SYSGEN_STOREMGR disappearing from environment This problem happens with both CE 4.1 and CE 4.2 We have a platform (based on Residential Gateway) that includes the Storage Manager component. When the project is first created it builds fine. At some point after the projects builds a few times the build will break being unable to find FSDMGR.LIB. This FSDMGR.LIB component requires the SYSGEN_STOREMGR environment variable to be defined. When I open a build command prompt and do a SET SYSGEN_ the STOREMGR is no long part of the defined environment. Yet, if I look at the project window the Storage Manager is listed as being included in the project. Sometimes I can just delete the Storage Manager from the project and drag it back over from the catalog, this fixes the problem for a while. Other times, it says the Storage Manager is in use and won't let me delete it. In either case if I try to define SYSGEN_STOREMGR in the Settings.../Environment dialog it says that the environment variable already set and won't let me set it. Something is clearly broken and is costing us huge in down time for our developers. Any ideas what might be happening here? Mark Moeller Tag: Error: failed PB timebomb check Tag: 38655
  - 14
    - Is there any usabel WTL port for Windows CE .NET 4.x? Hi! I am trying to build my application with WTL. But I cannot find any stable WTL port for Windows CE .NET. Is there one in the world? Tag: Error: failed PB timebomb check Tag: 38651
  - 15
    - Problem mapping physical address (0xC0000000) on Arm Integrator hi, I have a device with memory registers in physical address 0xc0000000, for which I am porting a driver from linux to CE 4.2 using PB. The device is connected to the logic module stack on an Arm Integrator board running ARM920T CPU. I have tried mapping this memory into virtual address using the following: .... addr = 0xc0000000; PHYSICAL_ADDRESS mapped, port = {addr, 0}; ULONG inIoSpace = 0; PUCHAR ioPortBase; if (!TransBusAddrToVirtual(Internal, 0, port, size, &inIoSpace, &mapped)) printf("Error translating I/O Ports.\r\n"); ... Debugging into TransBusAddrToVirtual showed that the debugger was disconnected inside the call for VitualCopy (in MmMapIoSpace). The linux driver maps (by ioremap) and uses this address successfully. Does anyone know what could be causing this problem? I tried also to statically map this address by modifying OEMAddressTable (after finding out that CreateStaticMapping function isn't implemented on Arm), but couldn't access VA_TEST. ... VA_TEST EQU 0xa5000000 ;first availble after VA_SC_BASE EXPORT OEMAddressTable[DATA] OEMAddressTable ... DCD VA_TEST, 0xc0000000, 1 ... ; ; End of Table (MUST BE ZERO!) ; DCD 0, 0, 0 AFAIK, there is no need for static mapping, using TransBusAddrToVirtual should do the job for any user-mode driver. Any help will be appreciated, Ilya. Tag: Error: failed PB timebomb check Tag: 38648
  - 16
    - DirectX in EVC++ Is it possible to do DirectX programming in EVC++ 4 with it's Standard SDK 410?, if it's possibe, why the library file (d3d8.lib) doesn't come with the Standard SDK 410? Tag: Error: failed PB timebomb check Tag: 38641
  - 17
    - How to generate CAB files that are sub-processor specific? Hi I am developing app for CE .NET 4.1 devices. How can I generate CAB files that are sub-processor specific, like I need different cab file for different sub-processors w/ a Processor family like ARM (ARMV4, ARMV4I, ARMV4T). The cab files seem to distinguish only between major processor family i.e it has only one identifier for the whole Xscale/SA. But the targets are different for different sub-processors within this family. In CE 3.0 I used to have only SA1100 BSP for devices both SA/Xscale (ipaq, toshiba e740 etc). Does that mean for CE.NET I should have a separate installer for each sub-processor. I think I missed something? Plkease provide any hints.. thanks... Tag: Error: failed PB timebomb check Tag: 38638
  - 18
    - CE.NET 4.1 device - which SDK to use? I need to develop a control app for my CF card on CE .NET 4.1 devices (Fujitsu iPAD). I installed eVC++ 4.0 w/ SP2 and PPC2003 SDK. But when I start eVC++ it says "no CE Platform SDK installed". what else should I install? Can I use PPC2003 w/ evC++ 4.0? For CE 3.0 app development I could do that by having evC++ 3.0 and PPC2003 SDK. Why is it different for CE .NET 4.1? Please let me know. --thanks Tag: Error: failed PB timebomb check Tag: 38636
  - 19
    - CEC Editing question Hello, I understand that defining custom directory structures is handled via the .DAT file. Is it possible to specify this in a .CEC? I.e. myfile.exe should be "installed" to /Windows/MyDirectory? It seems as though most of the cec build commands are only concerned with where the files are stored during the build, not the end directory structure to install them to. Thank you, - Paul Tag: Error: failed PB timebomb check Tag: 38628
  - 20
    - Field test/Beta testing - replacing device driver dll What is the suggested procedure for updating a built in device driver on a target device assuming the device is not portable and far away? Of course, I am talking about replacing a single DLL, not redownloading whole operating system image with a driver. One idea which comes to my mind is to make device driver loadable by the test application with RegisterDevice, but how is it done in real life if we are talking about non-portable Windows CE devices? Is there a way to gracefully shut down the driver and instruct DM to load/initialize one section of \Drivers\BuiltIn again? Tag: Error: failed PB timebomb check Tag: 38623
  - 21
    - Bug in CE4.2::WaveAPI.dll? Hi all, in migrating our platform from CE3.0 -> CE4.1 -> CE4.2 I have found something very strange, I think it is in waveapi.dll When we moved to CE4.2 we noticed that all sounds were being played at full volume. The volume app in control panel would let you move the slider, but as soon as a noise was played, the slider would return to full & the sound played at full volume. After some debugging we found that the sndPlaySound call that the volume app makes was working its way into waveapi.dll. Waveapi.dll was then setting the volume to full (traced by breaking at volume set in our wavePDD driver). As a hack to confirm my suspicions I copied waveapi.dll from our WINCE410 branch & made a new image - the volume bug went away. We are still using the old (CE3) audio driver model, and would like to keep using it. Does anybody else have this problem? Our hardware is based off the Assabet reference platform, we use the UCB1300 for audio output. Cheers Brad Tag: Error: failed PB timebomb check Tag: 38621
  - 22
    - PCMCIA reader driver problem I have a ActionTec PC750 PC (PCI)Card reader which is compatible with Windows CE - it is on the hardware compatible list. I try to build a CEPC platform and add a feature PCMCIA(TI1250). Build run OK - no error and warnning. But when I try to download to target. It gives error and target hanging. The error show: "Loaded symbols for 'C:\WINCE420 \PUBLIC\MYCEPCPLATFORM\RELDIR\CEPC_X86DEBUG\TI1250ISR.DLL' 4294772011 PID:63fca8fa TID:63fefd82 0x83fca3d0: PCMCIA:Unable to initialize STSCHG int 16 (error 87)" If I use PCMCIA(i82365-compatible) feature. I can build and download to CEPC. But when I plug-in my PC card into the slot. Nothing happened. The PCMCIA reader using the TI chipset. Tag: Error: failed PB timebomb check Tag: 38613
  - 23
    - beginner question: Build options when I need use build? rebuild? clean? make image?batch build? give the best case to use each option. Thanks, Tag: Error: failed PB timebomb check Tag: 38610
  - 24
    - what the cross mean on the feature icon? what the cross mean on the feature icon? Tag: Error: failed PB timebomb check Tag: 38606
  - 25
    - PB 4.2: NDIS startup problems During bootup, with a radio-based network card in the PCMCIA slot, the NDIS driver for this card fails to load. I have verified that the key shown in the ActivateDeviceEx line is definitely in the registry. I'm quite certain of this, since the driver loads and runs fine if I insert or reinsert the card after the boot sequence has completed. This seems to imply some problem with the NDIS startup sequence. Here is what I see in the Platform Builder debug window when this fails during bootup: DEVICE!ActivateDeviceEx(Drivers\PCMCIA\Lucent_Technologies-WaveLAN/IEEE-C908) entered PNP interface class {f8a6ba98-087a-43ac-a9d8-b7f13c5bae31} (NDS1:) ATTACH NDIS:ndisAddPCCardDevice INdisOpenDeviceKey failed NDIS: ERROR - NdisPCIBusDeviceInit no BusNumber for Comm\PCI\NDIS\Parms DEVICE!StartOneDriver RegisterDevice(NDS, 0, NDIS.Dll, 0x802ee6c) failed I'm guessing that it is default behavior in NDIS, that when if fails to open the registry key passed in, that it falls back to trying to see if the device might be on the PCI bus. In my case, there is no PCI bus or PCI dlls in my platform, or any Comm\PCI key in my reginit.ini. I do, however, end up with the following Comm\PCI entry in my registry after this bootup failure: [HKEY_LOCAL_MACHINE\Comm\PCI\NDIS\Parms] "BusType"=dword:00000005 "IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}" "Order"=dword:00000001 "Index"=dword:00000000 "Prefix"="NDS" "Dll"="NDIS.Dll" Another confusing bit of info is the fact that the \Drivers\Active entry does show an entry for the card, but does not have a drivers\active\04 entry for NDS0:, which I see when I boot up without the card installed. [HKEY_LOCAL_MACHINE\Drivers\Active\03] "Hnd"=dword:000305a0 "Name"="COM1:" "Key"="Drivers\\BuiltIn\\Serial" "InterfaceType"=dword:ffffffff [HKEY_LOCAL_MACHINE\Drivers\Active\05] "Hnd"=dword:00031c90 "Name"="NDS1:" "Key"="Drivers\\PCMCIA\\Lucent_Technologies-WaveLAN/IEEE-C908" "Sckt"=dword:00860000 "PnpId"="Lucent_Technologies-WaveLAN/IEEE-C908" "RegenumParms"=hex(7):\ 53,63,6b,74,00,50,6e,70,49,64,00,52,65,67,65,6e,75,6d,50,61,72,6d,73,00,00,\ 00,00,00,00,00,00 "InterfaceType"=dword:00000008 I have scoured the help files to little avail. One other bit of information to note is that if the card has a \Drivers\PCMCIA\detect entry in the registry, then it will successfully load and run on bootup, but if I have to rely on a PNP id, then that same card will fail like all the others. Has anyone else seen this kind of problem where a PCMCIA network device fails on startup, but works fine on a card insert? Can anyone suggest a next step to try to get these drivers (it happens on multiple vendor's radio cards) working properly without a card insert? Arthur McNair Vocollect, Inc. Pittsburgh, PA Tag: Error: failed PB timebomb check Tag: 38599
- Next
  - 1
    - Do's any one now how to Add LIB to EXPLORER build Sary, probably dome question. We have extension we are adding to explorer code and its building it, but its not including it as lib when it builds the EXPLORER code and the linker is telling me it knows nothing about my class. What have I missed in configuration?. Do's anyone have any ideas? Tag: Error: failed PB timebomb check Tag: 38588
  - 2
    - shadow in \windows Hi, I want to create a File System Block Driver that can give a stream interface to the FAT file system driver. Can someone give some info on how to do this? Thanks in advance. BV Tag: Error: failed PB timebomb check Tag: 38577
  - 3
    - unable to delete feature? I added a feature PCMCIA(i82365-compatible) and want to delete it now. But I can not delete it. I found there is down arrow on the icon. What that mean? Howcan I delete the feature? I can delete other feature though. Tag: Error: failed PB timebomb check Tag: 38567
  - 4
    - WCE Dynamic-link Library hello, I developed a simple DLL library, first in eVC++ 4, but was not able to download & register it to Win CE.NET 4.2 device. I wrote the "same" DLL in PB 4.2 (WCE Dynamic-link library) and was able to include that in my image file (nk.bin). But it was not registered. How can I find out what information I should write to registry and where to do it? Detailed How-to would be appreciated. Thanks Mike Tag: Error: failed PB timebomb check Tag: 38563
  - 5
    - delete the platform? I built my platform for learning. Now I want to delete it. Just delete myplatform directory? what else I need to do for clean deletion. Tag: Error: failed PB timebomb check Tag: 38560
  - 6
    - Corrupt database Hi everybody, Since I migrated to 4.20, I encountered "corrupt database" problems while building my platforms. In Platform Builder, this shows red lines like: BUILD: g:\wince420\platform\nce\build.dat(120): corrupt database (File error) Can anybody tell me how to fix it? Thanks in advance. Rémi Tag: Error: failed PB timebomb check Tag: 38553
  - 7
    - About "Platfrom Setting" in Platfomr Builder... Now I am working with Platform Builder 4.2. Three selection items, "Build and inclue image", "Build, but exclude from image", "Exclude from build and image" is appeared in "General" tab of "Platform Setting". Some components in "Catalog" is applicable to all cases but the oters is not. What should change or add to be applicable to these cases? Tag: Error: failed PB timebomb check Tag: 38550
  - 8
    - Found bug in PB 4.2 Hi All, 1. Build a platform for thin-client style. 2. Insert a 802.11 Wireless card 3. The CE of desktop style can show the wireless config UI. 4. The CE of thin-client style can not show the UI. Because the *.rc file does not include the dialog. 5. PB 4.1 has no problem about the wireless building a CE of thin-client style. Tag: Error: failed PB timebomb check Tag: 38549
  - 9
    - PCMCIA interrupt question I am confused and get lost. Hope my question is not as stupid as it seems. Each i/o pc card requests a IRQ and be assigned one. The PCMCIA bridge also assigned a IRQ. When the card has a functional interrupt, which IRQ will be set? If it is the IRQ assigned to pc card, assume Card Status Change use polling, does the PCMCIA bridge still need a IRQ? In MDD it seems all card functional interrupts are processed by IRQThread. How does it be signal when functional interrupt happens? Can anyone explain the interrupt architecture in PCMCIA for me? Please help. Li Yefei Tag: Error: failed PB timebomb check Tag: 38548
  - 10
    - does ce.net only support 3 serial ports? Hi everybody, Here I have a couple of questions about PB4.2 which listed below: 1.In pb4.2 I only find three serial items to add to the target:com1550;com16550(second instance);com16550(third instance),I don't know the difference between them,do they represent com port 1 to 3 of the target?if so,then does ce.net only support 3 serial ports? 2.In pb4.2 I have added all related components of activesync to the target os,but the built os can't communicate with PC via activesync(through serial port),I checked many times but can't find the reason.could anybody tell me what special attention shall I pay to add activesync to ce.net os? 3.In pb4.2 I have added 2 serial ports to the target,with the question above I don't know whether I did it properly,is there a tool to test serial port under ce.net? any reply will be appreciated Tag: Error: failed PB timebomb check Tag: 38546
  - 11
    - Device Driver Interrupts causing Kernel Crash Hello, I am trying to debug my custom driver's interrupts. Platform is Celeron with CE.NET 4.2, custom driver for BT878 PCI capture card. Everythings working expect interrupts... If you would please read these symptoms and let me know if this rings any bells with anyone. - Interrupts are coming in 30/sec (a video capture board) I get about 6-10 interrupts before kernel crashes. - In Release mode it always crashes in the same place (address) but unfortunately does not fall within range of anything in the nk.map - Running the kernel debugger on a debug image: I cannot catch anything because the board just hard resets when it hits the 'magic' crash time. - It seems to be related to something else starting (no interrupts conflicts, I checked) because I get interrupts for about 1-2 seconds before death. If I had to guess I would say it is sometime after all the 'Launch' key processes have started. - Waiting until everything is 'settled' (CE started) results in same behaviour. - I have determined when it crashes the actual interrupt thread is inside the 'WaitForSingleObject' function waiting on the 'InterruptInitialize' event handle. Does this sounds familiar to anyone ? Thanks, Jason nSpace Tag: Error: failed PB timebomb check Tag: 38536
  - 12
    - Loading File System Filter Driver on Demand in Win CE .NET Hi All. Iam writing an file system filter driver for WIN CE .NET, I want to attach/detach the filter driver on to any underlying file system ( eg. fatfsd.dll, ntdsfsd.dll ) on demand. The same can be done in windows 2000 by creating an device that will listen to custom IOCTL and do attach/detach the filter driver. Thanks in advance. rgds GP Tag: Error: failed PB timebomb check Tag: 38535
  - 13
    - Platform Builder 4.2 and Windows XP debugging problems Hello all, On Windows XP, I can build an image using PB 4.2, and download it via ethernet to my target device (an SH4 development board). I can also perform limited debugging via PB 4.2 using KITL transport over ethernet. When I say limited debugging, I mean that if I don't enable target control, other debug services (kernel debugger, debug messages) work fine - I can view the loaded modules through the tools menu and the target device runs as expected. However, when I turn on target control and rebuild the image, the device comes to a standstill during the OS boot. It looks like it has a problem using UDP to transfer lmemdebug.dll from my release directory, and waits forever for that to happen. Here's a sample output from the debug window in PB 4.2: ... Kernel debugger connected (KDBG stream opened). Kernel Version 1169 Checked loaded at 0x90990000, data relocated at 0x919e1c00 Debugger connection established (Target CPU is SH4). Loaded symbols for 'C:\WINCE420\PUBLIC\SV270\RELDIR\TRIMBLE_SHOTGUN2 _SH4DEBUG\NK.EXE' Loaded symbols for 'C:\WINCE420\PUBLIC\SV270\RELDIR\TRIMBLE_SHOTGUN2 _SH4DEBUG\KD.DLL' Finished re-loading kernel modules. Loaded symbols for 'C:\WINCE420\PUBLIC\SV270\RELDIR\TRIMBLE_SHOTGUN2 _SH4DEBUG\COREDLL.DLL' Loaded symbols for 'C:\WINCE420\PUBLIC\SV270\RELDIR\TRIMBLE_SHOTGUN2 _SH4DEBUG\FILESYS.EXE' 4294767326 PID:13fef002 TID:13fef256 0x93fef024: first = 01f10000, last = 02000000, SharedDllBase = 02dc0000 4294767404 PID:13fef002 TID:13fef256 0x93fef024: >>> Loading module coredll.dll at address 0x03F40000-0x03FFC000 (RW data at 0x01FFE000- 0x01FFF2D0) 4294767494 PID:13fef002 TID:13fe1dd6 OEMInterruptEnable 4294767495 PID:13fef002 TID:13fe1dd6 0x93fe1ba4: InterruptNo=21 4294767547 PID:b3fdc66a TID:b3fdc646 0x93fdc414: >>> Loading module filesys.exe at address 0x04010000-0x04072000 4294767554 PID:b3fdc66a TID:b3fdc646 0x93fdc414: FileSystem Starting - starting with clean file system 4294767554 PID:b3fdc66a TID:b3fdc646 0x93fdc414: +OEMSetRealTime() 4294769513 PID:b3fdc66a TID:b3fdc646 0x93fdc414: >>> Loading module fsdmgr.dll at address 0x03D60000-0x03D79000 (RW data at 0x01FE3000- 0x01FE3754) Loaded symbols for 'C:\WINCE420\PUBLIC\SV270\RELDIR\TRIMBLE_SHOTGUN2 _SH4DEBUG\FSDMGR.DLL' 4294769518 PID:b3fdc66a TID:b3fdc646 0x93fdc414: InitSharedHeap: 46000000 10000 c 4294769518 PID:b3fdc66a TID:b3fdc646 0x93fdc414: InitSharedHeap: return 46000050 4294769540 PID:b3fdc66a TID:b3fdc646 0x93fdc414: >>> Loading module relfsd.dll at address 0x03EB0000-0x03EBA000 (RW data at 0x01FF3000- 0x01FF3ABC) Loaded symbols for 'C:\WINCE420\PUBLIC\SV270\RELDIR\TRIMBLE_SHOTGUN2 _SH4DEBUG\RELFSD.DLL' 4294769576 PID:b3fdc66a TID:13fbd312 0x93fdf644: Mounted ReleaseFSD volume '\Release' 4294769628 PID:b3fdc66a TID:b3fdc646 0x93fdc414: FSREG: Logging in default user. 4294769629 PID:b3fdc66a TID:b3fdc646 0x93fdc414: SetCurrentUser: Logging out (nobody), logging in default 4294769631 PID:b3fdc66a TID:b3fdc646 0x93fdc414: SetCurrentUser: User hives not supported -- using same registry for all users 4294769704 PID:b3fdc66a TID:b3fdc646 0x93fdc414: Initializing Database 4294769728 PID:b3fdc66a TID:b3fdc646 0x93fdc414: DB:Validation: Name already exists DB_notify_events 4294769729 PID:b3fdc66a TID:b3fdc646 0x93fdc414: DB:CeCreateDatabase failed 4294769730 PID:b3fdc66a TID:b3fdc646 0x93fdc414: Filesystem initialized! 4294769732 PID:13fef002 TID:33fdf89a 0x93fdfd08: InitializeJit 4294769733 PID:13fef002 TID:33fdf89a 0x93fdfd08: InitMUI: DISABLED (- 1039795460) 4294769752 PID:b3fdc66a TID:93fb6232 0x93fdf644: RELFSD: Opening file LMemDebug.DLL from desktop at this point the boot process hangs. At the same time, the kernel trace output captured from Hyperterminal looks like this: ... KITL: Leaving polling mode... KITL Checking client registrations +RegisterClientPart2: Id 0x00000000 KITL Timer thread started, (hTh: 0x13FEDFCE, pTh: 0x93FE1000) -RegisterClientPart2 +RegisterClientPart2: Id 0x00000001 -RegisterClientPart2 KITL Creating IST KITL Interrupt thread started (hTh: 0xD3FE1DD6, pTh: 0x93FE1BA4), using SYSINTR 21 Enabling adapter ints... !CheckUDP: UDP header checksum failure !CheckUDP: UDP header checksum failure !CheckUDP: UDP header checksum failure !CheckUDP: UDP header checksum failure ... and these messages repeat ad infinitum. Now to the real issue - we can rebuild the same system on a Windows 2000 machine and everything works fine. Further, other project configs that work fine on that Windows 2000 box don't work when I try to build and debug them on my Windows XP box. I have tried everything I can think of - using the same ethernet connection as the Windows 2000 box (makes no difference), downloading the nk.bin that was built on Windows 2000 from my Windows XP box (same result). My conclusion - something is broken on Windows XP wrt its handling of the whole CESH download process. Has anyone else seen this problem. Any ideas? Is this a known issue? Tag: Error: failed PB timebomb check Tag: 38534
  - 14
    - MmMapMemIoSpace & CE4.2 revisited Hi All, Have recently returned to the problem of mapping memory to my device under v4.2. To recap, our device sits at $04200000 (66M) which is aliased on the PC-104 bus at 2M. We've been running the driver for 6mths now under v4.0 and v4.1 without any problems. Suddenly, under v4.2, it doesn't work. The call to MmMapIoSpace succeeds, but the memory it has mapped is definitely NOT our device. As per suggestions, I've replaced the call to MmMapIoSpace with a local version (cut-and-pasted directly from ceddk) and stepping thru makes me none-the-wiser. The calls to VirtualAlloc and VirtualCopy return success. It all thinks it's happy. One thing I *did* notice was that I wasn't OR'ing $80000000 with my physical address (which I need to do according to 'Building Powerful Platforms with Windows CE' - is this the case???). I've since tried this, but still no luck. I've reached a brick wall here. Stepping thru the assembler for VirtualAlloc & VirtualCopy enlightens me not. Any further suggestions are welcome - otherwise it looks like this product will NEVER use v4.2. TIA Regards, -- Mark McDougall, Software Engineer, USCOM Pty Ltd Level 4, 199 Clarence St, Sydney, NSW, Australia Ph: +612 9299-3370, Fax: +612 9299-3929 <http://www.uscom.com.au> Tag: Error: failed PB timebomb check Tag: 38531
  - 15
    - DirectX in eMbedded Visual c++ I cant get answer from DirectDirect3DCreate8(D3D_SDK_VERSION); and it cant create an instance of a Direct3D8 object in my EVC++ invironment! can you help me? Tag: Error: failed PB timebomb check Tag: 38522
  - 16
    - Description of MODULES/FILES/Slot0/Slot1 wanted I've read in the PB4.2 help and also some MSDN articles about FILES and MODULES section but don't have a clear picture of the differences. What does it mean to put my "SomeTestApp.exe" in FILES vs in MODULES? How does this relate to "slot 0" and "slot 1"? If I have a dll or an exe, should it go into FILES or MODULES? What are the pros/cons? What if I put a managed (C#) app in my image, where should exe/dlls go? I.e. is there a difference compared to unmanaged code? What does "fixup style" mean? And how does that relate to MODULES/FILES/SlotX? Thanks. Tag: Error: failed PB timebomb check Tag: 38506
  - 17
    - How to exporting pointer from kernel I am running WinCE 4.1 on a CEPC (x86). I am creating a global pointer in PRIVATE\WINCEOS\COREOS\NK\KERNEL\sysinit.c. I want this pointer to be seen by other device drivers for example the NE2000 ethernet drive. I am doing this just debug purposes. How do I go about doing this? Thanks Aravindh Tag: Error: failed PB timebomb check Tag: 38502
  - 18
    - I want Windows Mobile 2003 software! Hi, I am looking for information on how put Windows Mobile 2003 on my device. It now is running Windows CE 4.2 and I have the platform builder. What are minimum hardware requirements? How can I get Windows Mobile OS so I can build it to image? Pricing? Licensing? Can someone point me to web page or document? Thank you, Sava Tag: Error: failed PB timebomb check Tag: 38499
  - 19
    - boot CEPC from Hard Disk? I am following the "How to ..." to boot the CEPC from hard disk. Everything goes smoothly until I excecute the command: A:\> mkdisk C: I got "File not found - BLDR" Where the file located and when it is built? Where the problem happened? Tag: Error: failed PB timebomb check Tag: 38485
  - 20
    - Running bootloader from flash I'm working on a bootloader for a platform with the following memory config: 32 MB SDRAM mapped at 0x10000000 16 kB SRAM mapped at 0x20000000 8 MB flash mapped at 0x40000000 I'd like my bootloader store its code in flash, data in SRAM and push the OS image from the network into SDRAM. Up until now I've been keeping the bootloader code and data together in SRAM but have just about run out of space. I've tried a variety of boot.bib entries and EXEBASE settings but can't seem to separate the (read only) code and the (read write) data, any suggestions would be much appreciated, Many Thanks, James Tag: Error: failed PB timebomb check Tag: 38478
  - 21
    - Multiple image files Hi, I'm looking for a way to split the nk.bin file into two binary image files, one for the kernel and all the essential OS modules and one for my self-written applications, dlls and files, so I just have to send the second binary to a customer if my part has changed. How can I do that? Any help is appreciated. Thanks in advance, Carsten Tag: Error: failed PB timebomb check Tag: 38469
  - 22
    - WCELDCMD Problem We have a customer that needs to install their application without a UI. WCELOAD works fine. But when we use WCELDCMD instead, no shortcuts are installed. Is this a recognised problem? and is there a fix for the problem? The terminal used is still running Windows CE 3.0 with all the current QFE's. Tag: Error: failed PB timebomb check Tag: 38460
  - 23
    - BIB info in cec files and platform.bib I am trying to create a new cec file for a new BSP. I see that PB 4.2 allows you to use the BIB file / BIB record mechanism in order to handle BIB entries. Does this mean the platform.bib file used in previous versions of CE is now obsolete ? Should I still duplicate the entries I have in my cec file in platform.bib ? I suspect platform.bib is still useful for command line building but not used if building from the IDE. Would this be a correct statement ? Thanks Tag: Error: failed PB timebomb check Tag: 38459
  - 24
    - Performance C# and CompactFramework Hello, I have written this short programm: (get Time1) for (long j = 0; j < 10000000; j++) { long i = j; } (get Time2) (UseTime= Time2 - Time1) this need 20 seconds with C# and only 2 seconds with C++ (without MFC and GUI). Is there any Error in our Image?? We use a x86 CPU, is this a problem with x86 CPUs?? Peter Tag: Error: failed PB timebomb check Tag: 38454
  - 25
    - BUILDREL_USE_COPY set/unset in IDE Hi all I have read many things about BUILDREL_USE_COPY in the newsgroups. Now I wonder, how do I set this variable in the PB4.2 IDE? I made a test with two different platforms: 1. A new platform based on Keywest => BUILDREL_USE_COPY is set to 0 2. My own platform which I migrate from PB4.1 => BUILDREL_USE_COPY is set to 1 Why is there a difference an where can I set or unset this variable in the IDE? TIA -- Michael Reim reim AT helmut-fischer DOT de Tag: Error: failed PB timebomb check Tag: 38451

Hi,

I try to do a rebuild all (and I did also rebuild all with
enable deptree) and I got this error:

makeimg: Check for
F:\WINCE410\MIRANDA\ALTO_B~1
\RelDir\NATIONAL_GEODE_X86Debug\PreRomImage.bat
to run.
makeimg: run command: romimage
F:\WINCE410\MIRANDA\ALTO_B~1
\RelDir\NATIONAL_GEODE_X86Debug\ce.bib
Error: failed PB timebomb check
makeimg: FATAL ERROR: Command returned non-zero exit code
1 (dec).
makeimg: FATAL ERROR: Command returned non-zero exit code
1 (dec).
Error PB2505: Error executing
#(F:\WINCE410\MIRANDA\ALTO_B~1
\RelDir\NATIONAL_GEODE_X86Debug\)makeimg.exe.

The platform builder I have is not an evaluation copy. I
have a full license....

Any ideas why do I get PB timebomb check?

Thanks!!

Top