EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Nk.bin not executing in emulator Hi, I created a custom run-time image file, but its not executing in the emulator. The emulator window appears but the screen is always black. I am executing the following statement from command line - start "" "C:\Program Files\Windows CE Tools\Common\Platman\bin\Emulator_500.exe" /CEImage "C:\WINCE500\PBWorkspaces\myworkspace\RelDir\Emulator_x86_Debug\NK.bin" /ethernet virtualswitch /MemorySize 48 There is no change even when i use a skin. Please help. Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57479
  - 2
    - About the warning information about LNK 4209 Dear all: I am migrating a driver from the WinCE 4.2 to WinCE 5.0, but there is a fatal warning when I build the driver in the WinCE 5.0 env? It is quite strange and any one who can give me some help? wince.obj : warning LNK4209: debugging information corrupt; recompile module; linking object as if no debug info those compile option in the makefile: CFLAGS: -Zi -Gy -Ox -Os -GF ... DFlags:-debug -debugtype:cv Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57478
  - 3
    - hi Actually i meant to ask what is the diffference b/t 890_serial,com_card,com_mdd,com_mdd2,com16550,isr16550,ser_card,ser_card2,ser16550 in the oak/drivers/serial/ folder... Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57476
  - 4
    - This is not a .BIN file FF FF FF FF FF FF FF Hi, somehow I managed to run the bootloader without errors. but now it is giving error like as follows...... previously the errors was data checksum failure and then Received out of sequence block 3925869566 Expected block 0 now that errors are disappeared and here is my debug output.... Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Mar 13 2003 23:05:42 System ready! Preparing for download... Sending boot request... Waiting for boot ack... received non-download packet type Sending boot request... Waiting for boot ack... received non-download packet type Sending boot request... Waiting for boot ack... received non-download packet type Sending boot request... Waiting for boot ack... Received boot ack Received boot request ack... starting download This is not a .BIN file FF FF FF FF FF FF FF what is this problem? I have checked the nk.bin image, and it starts with B000FFonly..... what could be the problem? I am not doing anything with the data buffer.... the problem of datachecksum and all were some problem other than that..(relocation of code...) regards Sujith Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57475
  - 5
    - Private Code Tree Hi, If I want to include my version information in a build, can I modify GetVersionEx function in the COREOS directory in the private tree? I am planning to modify the szCSDVersion member of the OSVERSIONINFO. I'm using CE .Net 4.2. I am not sure about this but I think the licensing might be a problem, is that correct? Thanks a lot, Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57460
  - 6
    - Where is it stuck on ARM Hello Experts, I was able to get the kernel to this point, where is it stuck and what are the possible issues? How do I fix this? It was able to pass this state before. Windows CE Kernel for ARM Built on Mar 13 2003 at 22:43:27 ProcessorType=0200 Revision=4 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 80071140 OEMInit() Turning on Branch Target Buffer Enable CP0 Access Initialize Timer Interrupt Done OEMInit() Booting Windows CE version 4.20 for (ARM) &pTOC = 8007943c, pTOC = 801fac14, pTOC->ulRamFree = 807ab000, MemForPT = 000000 00 Booting kernel with existing memory configuration: Memory Sections: [0] : start: 807ac000, extension: 00001000, length: 00853000 Sp=ffffc7cc ARMInit done. Windows CE KernelInit Updated eptr->e32_vsize to = 000ad000 Thanks, Nguyen Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57458
  - 7
    - Unable to configure CE.NET for more than 3 serial ports. Hi, I have a hardware which has six serial ports and I was able to use this and configure it with the CE 3.0. But in CE.NET I am not able to use more than 3 serial ports. I have already disabled the COM1 debug port by modifying the Debug.C file. It seems the trick is how to use the port base addresses found at the start of platform.reg file. I am really not sure how do those addresses work. My hardware settings are COM1 - IRQ4 - SysIntr 14 - 0x3F8 ( Works ) COM2 - IRQ3 - SysIntr 13 - 0x2F8 ( Works ) COM3 - IRQ9 - SysIntr 19 - 0x3E8 ( Works ) COM4 - IRQ6 - SysIntr 16 - 0x2E8 ( Fails !! ) COM5 - IRQ7 - SysIntr 17 - 0x280 ( Fails !! ) COM6 - IRQ14 - SysIntr 24 - 0x2C0( Fails !! ) I checled in the driver and it seems to fail when the InterruptInitialize function in the StartDispatchThread is called for COM4,COM5 and COM6. Any help with what could be wrong will be highly appreciated. Thanks, Bhavin Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57457
  - 8
    - adding XML support (without new OS image) We already have our systems deployed and running CE.NET 4.1 out there, but during the time the CE.NET OS was built without XML support. We have an CE application it would run on the new OS image (that I built with XML support, along with ATL). But when tried to run on the original OS image, it will say it is "not a valid CE application". I have tried to copy EVERY DLL that is new to the new OS (msxml3.dll, etc) over to the same directory of our application, but it doesn't help any. Is there anyway to make the old OS image support XML without deploying a whole new OS image. Or find out precisely what is our application is looking for a specific setting or DLL. I have already ran dumpbin but can't find anything specific, my guess is the msxml3.dll needs some other things. Also I have noticed the coredll.dll is different sizes on both images. Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57456
  - 9
    - WMV plays choppy. MPG plays fine Hi all. I searched and couldn't come up with something that addressed my issue. so here it is: We are running WinCE 4.20 (all latest QFEs installed), and we're trying to make a multimedia build. However we're having some real issues trying to play WMV files. They play nicely for about a minute, but suddenly they start freezing-resuming, freezing-resuming. MPG and AVI files play absolutely fine, only WMV files seem to display this behavior. We're on a custom x86 board with 256 MB ram, running at 300 mhz. Using this hardware with XP embedded WMV files work fine, but when on CE 4.20 it just doesn't. Any clues? Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57455
  - 10
    - Including a CA root certificate in the Platform Builder image Hi, How do I include an additional CA root certificate (i.e. our own) in the root certificate store for SSL encryption purposes. If fact, I might like to remove the default ones that come with the build (Verisign etc). I know this can be done through the control panel and also presumably through an API, but I'd like to include the certificates in the image at build time through Platform Builder. I have looked for FAQs etc, but can't find anything.... TIA, - John Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57453
  - 11
    - New Platform Wizard Base Configurations Is there a way of adding a new "base configuration" to the New Platform wizard in CEPB 4.2. I see that each base configuration is an XML file in the \Program Files\Windows CE Platform Builder\4.20\cepb\bin\IDE\Wizards. Is there some way that anyone knows, other than editing one of these files, to set up a base configuration to be re-used when making new platforms? Andrew. Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57450
  - 12
    - Kernel Debugger Hi, how do I build the WINCEROOT\\PRIVATE\WINCEOS\COREOS\NK\KERNEL\ARM\ directory wit my current settings. I want to debug the KernelStart code, in the armtrap.s file.... I have a routine in assembly, which initializes and write data to the UART 0 / 1 I tried build -c but it fails with some errors. from which directory I can give a build? Regards Sujith Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57443
  - 13
    - Generating run-time image file for smartphone 2003 emulator Hi, I am using Windows CE 5.0 (eval) platform builder and generated a custom OS image file for emulator x86 BSP. And using this image file (Nk.bin) as an input to smartphone 2003 emulator. The skin appears but nothing appears on the screen, and no error appears!! Am I doing something, which is not permissible ? Is there anyway i can use this smartphone skin (supplied with smartphone 2003 SDK) to use the custom OS i generated with platform builder 5.0 ? Actually i want to test mpeg-4 streaming with the emulator, for which i have included codecs using PB. If the above is not possible, is there a way to achieve this ? Thanks Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57433
  - 14
    - How to port BSP from 4.2 to 5.0 ? Hi, Our platform uses Samsung 2410 CPU. We already have a .Net 4.2 BSP that is working on my platform. Now I try to build a .net 5.0 os image and run it on my platoform. However, I found it will be a big job if I must modify the codes of Samsung 5.0 BSP by extracting H/W-dependent codes from our 4.2 BSP . It is because the most directories and files names are different in .Net 5.0. In addition, bsp is centralized in .Net 4.2 , while BSP is distributed in .Net 5.0. Is there a easier way to run a .Net 5.0 OS on my platform? Thanks. Yu. Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57431
  - 15
    - PCI Driver ISR configuration. Hi to all, I've developed my own PCI driver for our own PCI board (Motor Controller), this board is plugged into an Advantech VIA Eden CEPC Board with our own WinCE 4.2 image. The image is standalone and boots with biosloader (with no KITL transport included, only TCP/IP transport and Manual Server). Now we are developing the application (with eVC++ 4.0 SP2) that uses the driver to manage the PCI board, we are debugging the app conecting with the target through TCP/IP transport and Manual Server (Using a telnet session to execute the command line). We have the following problem: sometimes, when I call the IOCTL that installs the ISR for my PCI driver, the TCP/IP conection is lost. Using PCIENUM utility I saw that the problem only happens when the IRQ allocated for my PCI board is the same as the one used by the ethernet board. So, my question is: Is the problen happening due to a wrong ISR instalation? Or a wrong call to LoadIntChainHandler?(Following is my driver source code por IRQ allocation). ///////////////// SNIP ////////////////////////////////////////////////////// DDKISRINFO IsrInfo; GIISR_INFO DataIsr HANDLE hIsr; HANDLE hevent; HANDLE hthread; IsrInfo.cbSize = sizeof(IsrInfo); DDKReg_GetIsrInfo(hRegEntry, &IsrInfo); hIsr = LoadIntChainHandler(IsrInfo.szIsrDll,IsrInfo.szIsrHandler,(BYTE)IsrInfo.dwIrq); DataIsr.SysIntr = IsrInfo.dwSysintr; // Stuff loading GIISR the rest of information in DataIsr.... KernelLibIoControl(hIsr, IOCTL_GIISR_INFO, &DataIsr, sizeof(DataIsr), NULL, 0, &kioreturned); hevent = CreateEvent(NULL, FALSE, FALSE, NULL); InterruptDisable(DataIsr.SysIntr); InterruptInitialize(DataIsr.SysIntr, hevent, NULL, NULL); hthread = CreateThread(NULL,0,Driver_IST,&hevent,0,NULL); CeSetThreadPriority(DevData.hThread, 0); ////// IST Sorce Code: //////// DWORD WINAPI Driver_IST(LPVOID lpArg) { HANDLE phev; DWORD intreg; phev = *(HANDLE *)lpArg; while(!Global_Abort) { WaitForSingleObject(phev, INFINITE); if(!Global_Abort) { SetEvent(ThDevData->hAppEvent); InterruptDone(ThDevData->DatosIsr.SysIntr); } } return 0; } //////////////// END SNIP ////////////////////////////////////////////// Any suggestion will be appreciated. Thanks in advance for your help. Best Regards, Juan. Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57430
  - 16
    - is ser16550 genuine hi, i want to test a generic serial driver,is SER16550 is genuine,which one in oak/drivers/serial should be selected,since i am a beginner,i expect that my questions will get its own importance and it won't be neglected.... thanks Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57428
  - 17
    - EXEBASE of NK.EXE Hi all, is there any formalities in giving the EXEBASE to the Kernel in KERN, KERNKITL, KERNKITLPROF? because the default value here in the ARMINTEGRETOR BSP is something like 0x8CC00000 where the NK 88070000 01700000 RAMIMAGE RAM 89770000 00890000 RAM here the address is even outside the RAM Range? is there any way to find it out? regards Sujith Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57426
  - 18
    - is it an installation problem hi, while trying to get details about drivers .in the microsoft site,it is given in the following way..... [ Parallel and Serial Devices Documentation Windows DDK: "Serial Ports and Devices" "Parallel Ports and Devices" Driver Sample Code Installed with the DDK: Ports Class Installer %winddk%\src\setup\pnpports Demonstrates a class installer and property page provider for the ports class of devices. The ports class is divided into two types: COM and LPT or ECP (printer) ports. A separate property page is provided for each type of device. The class installer distinguishes both types of devices and installs each type of device differently. Parallel-connected devices %winddk%\src\kernel\parport\ Sample to aid in debugging client drivers and device firmware for parallel port connected devices. Serenum samples %winddk%\src\kernel\serial %winddk%\src\kernel\serenum Plus data definitions in the include file %winddk%\inc\ntddser.h ...] We are using registered version of platform builder 4.2 but i can't see the folder %winddk%\src.. only inc (folder) is there inside DDk,what happened ,is it any problem with installation.... Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57424
  - 19
    - [Q]: WMA Hi all, What is(are) the Core OS component(s) in the catalog under "Headless Devices" to support WMA files to be played [WinCE 4.2] ? I have come across "WMA codec" component, Is this the right one ? Presently, I have a audio driver supporting the waveform audio messages. So, Is there anything more to be supported in my audio driver for WMA ? regards sajid Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57421
  - 20
    - IME programming problem (Phonetic IME) To all, As from my last post http://groups.google.com/groups?q=50230065+platform&hl=zh-TW&lr=&ie=UTF-8&selm=b894244a.0409211909.222d30a3%40posting.google.com&rnum=2 I've encountered a few problems from modifying existing IME Modules under WinCE.Net 4.2. So I've thought of another alternative like this: Since modifying the source will make the IME dll not to work (I can't even bring up the small keyboards after rebuilding it), what about writing a dll to supply the sendCharEvents and SendKey methods to simulate Word builing directly. I don't know if this really works, since I'm still studying the samples codes. Any comments? From Jason (Kusanagihk) Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57420
  - 21
    - cepb4 install on 2003 server, always rollback am install cepb4 on 2003 server, and have installed many times, but always at the register dlls step(this should be the last step,i think) the install program rolled back. and cancelled all the install files. had anybody met this problem, can anyone help me plz. thanks Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57415
  - 22
    - PB 5.0: the evaluation version has any difference with the release version except the time restriction? Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57414
  - 23
    - erreo while building i get error as compile flush error what is it and how 2 debug it Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57409
  - 24
    - Unidentified PCCard Adapter ?? I am working on a PCCard driver. The driver loads OK, all the exports are correctly called but after a minute or two a dialog with the message "Unidentified PCCard Adapter" appears. Is there a registry setting (or ??) that will correctly pair the device an its driver so that this message will not appear? Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57390
  - 25
    - JScript problem on CE.NET 4.1 Hi All, I got following simple Javascript code: <html> <head> <script language="Javascript"> alert( "Starting "); window.open("http://www.b2dsolutions.com"); alert("Ending"); </script> </head> <body> <br>this is a test and only a test </body> </html> On desktop it's works fine. But on CE.NET 4.1, the second alert message can't be shown. And later I found all the alert message after window.open will not be shown. Dose anyone have any expenrice on this? Thanks Xu Jun Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57386
- Next
  - 1
    - BPSs for PB30 to PB42 I have a BSP for pb3.0. I can load it under pb4.2????? Thanks in advance payment Michele Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57364
  - 2
    - How to verify NK.BIN is deployable? I know I read somewhere that there was a tool or something that analyzed NK.BIN or the directory hierarcy to determine if my OS images was legit to distribute (aka, no mods to private, etc.). I tried everything I could think of as a search paramater in google. Can someone tickle my memory on what this is, or if it even exists? Nick. Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57359
  - 3
    - Unable to load OS image for Thin Client through Ethernet Card. i am unable to load OS image for THIN CLIENT using RealTek 8139 Network Card. Thin Clients boots up and shows Message JUMIPNG TO 0X0013A420. The CONFIGURE option In ETHERNET Tab does not show the device name. i have tried rebooting but same problem. i have also checked the IRQ and IOBASE value in the AUTOEXEC.BAT file and they appear to be allright. can any one guide me. Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57352
  - 4
    - [Q]: Driver Samples Hi all, Are there any audio driver samples based on Unified Audio Model as said by Macallan [WinCE5.0]? Just including waveform audio & mixer. regards sajid Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57351
  - 5
    - [Q]: Unified Audio Model Hi all, The UAM provides the following advantages: Robustness: Lessens the number of mixing-related problems you will encounter. How does the UAM lessens the number of mixing-related problems ? regards sajid Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57350
  - 6
    - Activesync Remote Display send wrong ARM server (cerdisp2) to target (ARMV4 / ARMVi problem?) Hi, I am working on a CE 4.2 display based OS and a target with no screen. In order to see the screen output I use ActiveSync Remote Display from the Windows Mobiel Developer Power Toys. When starting ASRDisp.exe the app some how figures out which server to send to the target ( using dependency walker: CPU ARM or Thumb) and the sends the cerdisp2.exe to the target, starts the client on the host and they connect, result: the screen output on the development host. Nice. This scenario worked correctly when I build the OS for ARMV4I, the cerdisp2.exe Thumb binary was send to the target. When I build the OS for ARMV4, the cerdisp2.exe Thumb binary still gets send to the target in stead of the Standard cerdisp2.exe for ARMV4. What can be the cause of this? (Does ASRDisp.exe query the target or is target info stored locally?) -- Jeroen Kratz Chess iT jeroen_DOT_kratz_AT_chess_DOT_nl Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57348
  - 7
    - have problem about IMEI? To Guru Is it possible to get IMEI by never use "lineGetGeneralInfo" ? Best Regard. Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57347
  - 8
    - CETK problems Hi all, We have implemented a Display Driver for a ARM based board. We are trying to include the CETK Component in the Image and test our Display Driver. We have not yet integrated the Touch Screen Driver. We have Telnet component in the image through which we login into the device and invoke clientside from the telnet console. But when we invoke the clientside from the telnet console, we get an unknown IOCTL from the Kernel/Hal/OEMIoctl.c. We do not see the Target device listed in the Windows CE Test Server Window on the Host. We found that this IOCTL was IOCTL_HAL_WHQL_TEST_MODE. The Win CE Help suggests that this is an optional IOCTL and hence we have not implemented this IOCTL in OAL. I wanted to know the following: 1. What is the relation between this IOCTL and clientside ? 2. To execute CETK, do we need to add any support in the OAL ? We have VMINI Support in our OAL and we are using this itself for the debugger connection. We have set appropriate registry settings for VMINI. We have confirmed these settings by pinging the device once it comes up. Thanks in advance vikram Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57344
  - 9
    - about FAL & FMD Hi All, I'm a student and I'm starting to develop my first driver under wince. It is nand flash driver. So, I'd like to make a new FAL and a new FMD but I don't have any technical information about FAL. Could you indicate me where I find it? How do I link FAl to FATFS and FMD? I hope you can help me because it's important for my degree thesis. Thanks in advance for your support. bye Nandino Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57342
  - 10
    - more virtual ports over one Bluetooth device Hi All, I'm just a beginner in WCE 4.2 and I have a question regarding the Bluetooth device. Is it possible to use more than one "virtual COM" port on an unique Bluetooth Device? In every example I saw that only one "virtual COM" is build over a BT stack but I didn't find an explicity limitation. thanks Diego Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57341
  - 11
    - How to increase the maximum of device-related SysIntr? There are more than 32 devices on my reference board. But I found that it was defined as this in [D:\WINCE420\PUBLIC\COMMON\OAK\INC\nkintr.h] #define SYSINTR_MAX_DEVICES 32 How to increase the maximum of device-related SysIntr? Is that OK to just change the above defination to a big value like this? : #define SYSINTR_MAX_DEVICES 64 Is there anything else should be done? Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57340
  - 12
    - How to delete a feature type in PB4.2 How to delete a feature type in PB4.2 My platform( Sitsang: a reference board of PXA250) are difficult to start. I found that there are some problems on usb drivers. Since I am not using USB now, I just want to delete this device type to overcome it temporarily. But In Feature View of PB4.2, I right-clicked "USB Function", and choose "Delete", After a long time "Getting feature variables.." It is no use! The USB device type still stand there! If I click "Build > Rebuild Platform", it said the features was unresolved! ( And here are some complaints to MS: why it take so long time to just modify a small feature. It just like that I want to remove a window-glass, but MS destroy the whole house and rebuild a new one! ) ------------------------------------------------------------------------------------ Setting the "Exclude from build" flag on the PCMCIA (PC Card) driver for the LIZA - SITSANG: ARMV4 Win32 (WCE ARMV4) Release build configuration because the necessary support is not present in your platform. Setting the "Exclude from build" flag on the Local Area Networking (LAN) devices driver for the LIZA - SITSANG: ARMV4 Win32 (WCE ARMV4) Release build configuration because the necessary support is not present in your platform. Setting the "Exclude from build" flag on the XSC1BD Touch Controller driver for the LIZA - SITSANG: ARMV4 Win32 (WCE ARMV4) Release build configuration because the necessary support is not present in your platform. Setting the "Exclude from build" flag on the Storage Devices driver for the LIZA - SITSANG: ARMV4 Win32 (WCE ARMV4) Release build configuration because the necessary support is not present in your platform. Setting the "Exclude from build" flag on the PCI Bus driver for the LIZA - SITSANG: ARMV4 Win32 (WCE ARMV4) Release build configuration because the necessary support is not present in your platform. Setting the "Exclude from build" flag on the Audio driver for the LIZA - SITSANG: ARMV4 Win32 (WCE ARMV4) Release build configuration because the necessary support is not present in your platform. Setting the "Exclude from build" flag on the Power Button driver for the LIZA - SITSANG: ARMV4 Win32 (WCE ARMV4) Release build configuration because the necessary support is not present in your platform. Setting the "Exclude from build" flag on the Keyboard/Mouse driver for the LIZA - SITSANG: ARMV4 Win32 (WCE ARMV4) Release build configuration because the necessary support is not present in your platform. Setting the "Exclude from build" flag on the Display driver for the LIZA - SITSANG: ARMV4 Win32 (WCE ARMV4) Release build configuration because the necessary support is not present in your platform. Setting the "Exclude from build" flag on the Serial driver for the LIZA - SITSANG: ARMV4 Win32 (WCE ARMV4) Release build configuration because the necessary support is not present in your platform. Removing the "Exclude from build" flag from the PCMCIA (PC Card) driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because it is now supported by your platform. Removing the "Exclude from build" flag from the Serial driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because it is now supported by your platform. Removing the "Exclude from build" flag from the Local Area Networking (LAN) devices driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because it is now supported by your platform. Removing the "Exclude from build" flag from the Power Button driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because it is now supported by your platform. Removing the "Exclude from build" flag from the Display driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because it is now supported by your platform. Removing the "Exclude from build" flag from the Audio driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because it is now supported by your platform. Removing the "Exclude from build" flag from the USB Function driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because it is now supported by your platform. Removing the "Exclude from build" flag from the Storage Devices driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because it is now supported by your platform. Removing the "Exclude from build" flag from the Keyboard/Mouse driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because it is now supported by your platform. Setting the "Exclude from build" flag on the PCMCIA (PC Card) driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because the necessary support is not present in your platform. Setting the "Exclude from build" flag on the Local Area Networking (LAN) devices driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because the necessary support is not present in your platform. Setting the "Exclude from build" flag on the USB Function driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because the necessary support is not present in your platform. Setting the "Exclude from build" flag on the Storage Devices driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because the necessary support is not present in your platform. Setting the "Exclude from build" flag on the Audio driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because the necessary support is not present in your platform. Setting the "Exclude from build" flag on the Power Button driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because the necessary support is not present in your platform. Setting the "Exclude from build" flag on the Keyboard/Mouse driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because the necessary support is not present in your platform. Setting the "Exclude from build" flag on the Display driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because the necessary support is not present in your platform. Setting the "Exclude from build" flag on the Serial driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because the necessary support is not present in your platform. Added the Toolhelp API feature (SYSGEN_TOOLHELP) to the platform. Added the Pocket Internet Explorer HTML View (WEBVIEW) feature (SYSGEN_WEBVIEW) to the platform. Added the Standard I/O (STDIO) feature (SYSGEN_STDIO) to the platform. Added the Standard I/O ASCII (STDIOA) feature (SYSGEN_STDIOA) to the platform. Added the Internet Explorer Multiple-Language Base API feature (SYSGEN_MLANG) to the platform. Added the Storage Manager feature (SYSGEN_STOREMGR) to the platform. Added the CAB File Installer/Uninstaller feature (SYSGEN_WCELOAD) to the platform. Added the Windows Internet Services feature (SYSGEN_WININET) to the platform. Added the URL Moniker Services feature (SYSGEN_URLMON) to the platform. Added the RAM and ROM File System feature (SYSGEN_FSRAMROM) to the platform. Added the C++ Exception Handling feature (SYSGEN_CPP_SEH) to the platform. Added the Sample Internet Explorer 6.0 Internet Options Control Panel feature (SYSGEN_INETCPL) to the platform. Added the Software-based Input Panel Driver feature (SYSGEN_SOFTKB) to the platform. Added the Tahoma (Subset 1_07) feature (SYSGEN_FONTS_TAHOMA_1_07) to the platform. Added the Internet Explorer Browser Control Host feature (SYSGEN_SHDOCVW) to the platform. Added the RAM-based Registry feature (SYSGEN_FSREGRAM) to the platform. Added the National Language Support (NLS) feature (SYSGEN_CORELOC) to the platform. Added the Run-Time Type Information feature (SYSGEN_RTTI) to the platform. Added the Telephony API (TAPI 2.0) feature (SYSGEN_TAPI) to the platform. Added the USB Function driver to the platform. 1 warnings found. Not all features or drivers could be added. The build system will automatically include these when you build the platform. ------------------------------------------------------------------------------------ Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57339
  - 13
    - SMB Print from Windows 2000 server Dear Greats, I am having Windows CE 4.2, WBT client. I included SMB print service in my client ( LPT1, COM1, COM2 ports). It is working fine with Windows XP, 2003 machine. If i enumerate my client (\\IP address) for printer configuration from a windows 2000 machine. it says no such device in the network. so unable to view the client shared information (printer ports). Is their any other components to be included to make it work with 2000 server or is it a known issue. Inform me if their is any QFE to fix this problem. Kindly show me some light to over come this problem. Expecting your reply. With thanks & regards, avkumar. Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57338
  - 14
    - [Q]: Mixer & Application Hi all, This query is related to software audio mixer & its applications. Which is the Core OS component under Multimedia Technology in WinCE 4.2 that utilizes the software audio mixer ? What are the mixer applications WinCE 4.2 provides with the above component if any ? I am new to the software mixer functionality. I have tried finding information in google wrt this, but got many with commercial contents. Any useful link in this regard ? Many thankx in advance. regards sajid Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57337
  - 15
    - encountered exception in filesys.exe when reading/writing file in win ce 4.2 i have encountered an exception in filesys.exe whenever i am accessing a file. the os is win ce4.2 and the platform is au1500 (mipsII).The device i am having contains more than 32 MB of system RAM. i had gone thru the knowledge- based article Q285113. It seemed its an issue "If you try to gain access to a file that is stored across a 32-MB boundary on a Pocket PC that contains more than 32 MB of system RAM, an exception in Filesys.exe occurs" in Microsoft Windows Pocket PC with Windows CE 3.0 and Microsoft Windows CE Platform Builder 3.0. its been fixed at Microsoft Windows Pocket PC with Windows CE 3.0 and Microsoft Windows CE Platform Builder 3.0 and there's a list of platform there. however, the au1500 (mipsII) is not stated there. Does that mean in win ce4.2, this "fix" is already there OR its ok in win ce4.2 for all platforms? thus does anyone here had encountered this issue and if so...how can it be overcome. thank you... Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57332
  - 16
    - Does WinCE 5.0 support native 802.11? If yes, then where to find the native 802.11 PAI? The WinCE 5.0 help documents does mention reltek has a native 802.11 driver, and the card type is rtl8180, Another problem is what is the latest NDIS version the WinCE 5.0 support? Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57327
  - 17
    - Using CardServices to access ports on Compact Flash socket I have a simple device that I've developed that has an 8 bit digital IO interface. I'd like to interface to this board using a PocketPC that has a compact flash slot. Since this is just a quick and dirty test project, I don't want to implement all the Compact Flash interface requirements on my custom device. I've written a driver that conforms to the Stream-Interface Device Driver Model and I can get it installed and running and make calls to it via CreateFile, Read/Write, etc. from a test application. I can get my custom card powered up by calling CardRequestConfiguration in the driver but now I am stuck. My goal now is to be able to read/write to the 16 I/O lines on the CF interface. I figure I need to call CardRequestWindow/CardMapWindow to get pointers to some memory I can use to access the ports but I don't know anything about the socket itself. I don't have a real compact flash card in the slot so I don't have a real concept of attribute and memory space. So how do I go about getting access to those pins on the Compact Flash bus? In the end my goal is to be able to call READ_PORT and WRITE_PORT and get access to those 16 pins. Would I use CardRequestWindow and CardMapWindow? If so, what values do I use for window attributes, access speeds and window size? Thanks in advance for any help. Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57318
  - 18
    - Smart Card Development I have an iPAQ 5555 with a Smart Card Reader Sleeve. I need to develop a proof of concept application for a customer. My problem is that PocketPC 2003 does not include winscard.dll/scard.dll. How am supposed to demontrate (or deploy for that matter) my application without these DLLs. Does anyone know where I can get them, Platform Builder, etc? Rob Trainer Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57314
  - 19
    - DirectSound Warning Hi, I'd like to include Direct Sound in my image, on a device that has a regular MDD/PDD audio driver with no hardware Direct Sound support. When I do that, I get a Messagebox pop up in CE player that says something to the effect of "Warning: Audio hardware missing or disabled" It then continues on to play audio. I'm assuming this is due to the missing DSound extensions, is that correct? Any way to make this message box go away? I already know the driver is emulating DSound, the message box is nothing more than an annoyance for the user... Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57313
  - 20
    - How to run from RAM??? If I want my image to run from RAM, do I just use the ROMOFFSET in config.bib? Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57306
  - 21
    - Strange registry differences between Release and Debug Builds? I'm just getting started with Platform Builder and I'm running into a small problem. I added some register entries in the project.reg file. When I build the Debug version of the platform my register entries show up on the device. When I build for the Release version, my entries don't show up in the device's registry. FWIW, I'm using a RAM based registry. The SDK is provided by the vendor of the board we are using. I'm using Windows CE 4.2. Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57303
  - 22
    - format/partition detect I see from the documentation and searching this group that you can have a storage device autoformat and autopartition. On our CE based device we'd prefer to do all of the UI without any system prompts or dialogs and without autoformat/partitioning. We'd like to control this from within our application or a device driver via IOCTL calls. Is there a way to be notified when a newly inserted storage device needs to be partioned or formatted? Or something to poll? Is it possible to initiate disk partitioning or formatting from the application level? Thank you for your help. Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57298
  - 23
    - KITL Addres Hi, I want to use Serial KITL for my platform... which address I suppose to use.. virtual or physical? anything else do I need to do? regards Sujith Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57290
  - 24
    - Problem with Arcom Board Trying to download a Tiny Kernel to an Arcom Geode Board Selected National Geode x86 BSP with PB 4.2 Fails after download Debug Output Kernel debugger is waiting to connect with target. 0 PID:0 TID:0 CEPC Firmware Init 0 PID:0 TID:0 RTC - Status Reg B - 0x02 0 PID:0 TID:0 OEM Extra DRAM Detected @ base = xA1C00000, size=32 MB 0 PID:0 TID:0 PCIBIOS:: BIOS Address static map to addr=a00e0000 0 PID:0 TID:0 GetPicRoutingIrqTable: Start 0 PID:0 TID:0 search_pci_bios start 0 PID:0 TID:0 CE Ethernet Bootloader found 32Bit BIOS Entry master_bios32=a00ff070 bios32_call_offset=1f080 for CE/PC 0 PID:0 TID:0 Return from First BIOS EAX=49435000 EBX=48bb0000,ECX=35de0000 EDX=ffd72497 0 PID:0 TID:0 32 PCI BIOS offset located.addr=48842497 1 PID:0 TID:0 Double Fault -- backlink=0048 ========== Will post Serial Debug as a reply. Other: - Similar problem with PB 5.0 using AMD Geode BSP - Works OK in PB 4.1 using Arcom BSP for the board Arcom haven't made BSPs for PB 4.2/5 for SBC-GX1 ========== -- David Jones Senior Lecturer School of Electrical & Computer Engineering RMIT University +61 3 99255318 Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57286
  - 25
    - Perminate Windows CE Development Chat Does anyone know of any permanent chat rooms for Windows CE Development? If none exist, I'm considering starting an IRC channel dedicated to Windows CE Development discussion on a major IRC Network. Does anyone have any thoughts on this subject? I feel this is an important and necessary step for the Windows CE community. Regards, George McCollister Tag: EBOOT SMSC 91C111 Sendframe/Getframe errors - LATCOL,TXURN,LOSTCAR Tag: 57283

Hi:
I am using SMSCLAN91C111, my hardware design is based on accelent IDP. I am
using Lubbock BSP to port software on my board.

I am in porting of Eboot. (91c96 code of Lubbock to 91c111), i am getting an
error message from my SMSC Controller while transmitting ARP -- LateCollison,
Tx Underun, Lost Carrier. Very rarely i am able to transmit, but during that
time i am not able to receive any frames, i polled the register of the SMSC
(Interrupt Status Register -RVC_INT bit), it's not set.

When i tried to capture packets using a "Ethereal" i am not getting any
packets. Even i tried with a Cross-Over cable, independent HUB. When i enable
DHCP, eboot always fails to initialize the DHCP. all the above happend only
in Static IP.

What could be the problem here? I am not able to find any solution, pls help
me .

Thanks & regds,
Peter

Top