DskImage failed!

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - how to get USB drivers work in ce 5.0? Hi, all I am a newbie on CE 5.0. I want to get USB drivers to work, like keyboard, mouse and USB disk, which components should I add in PB? Tag: DskImage failed! Tag: 82261
  - 2
    - Not able to use remote tools in EVC++ 4.0 and Active Sync 4.1 I am not able to use remote tools in evc++ 4.0 when i try to connect my device by remote tools (like remote file viewer) i get error "Platform manager was unable to connect to the device. Please check up your start up server and tranport settings and try again. My PC and device are connected by USB and my Platform managet settings are Transport -- microsoft Active Sync Start up Server - microsoft Active Sync i dont have any idea about the settings if any one having any idea please reply My Device has Wince CE 5.0 My Pc has Active Sync - 4.1 EVC ++ 4.0 SP4 Windows SP2 Tag: DskImage failed! Tag: 82254
  - 3
    - peghelp close box In WinCE 4.2, the help system had a close box in the upper right edge of the screen in the toolbar. However,that has disappeared in WinCE 5.0. Is there a way to enable the close box again ? peghelp does not appear to be available in source or have any dialog resources. Can anyone help? Please guide as as to which file can we look into. We can using PXA270 processor. Thanks. Tag: DskImage failed! Tag: 82253
  - 4
    - Registry settings for proific usb to serial converter can any 1 plz tell me, how can i configure a usb to serial coverter as a normal serial port in my winCE 5.0 based device. i do have the cab file installer for winCE4.2 which installs "USBSER.DLL". will that driver work with winCE5.0? and another thing is that, what all changes i will have to do in my platform building? do i have to change common.reg or platform.reg? if so what changes are required? any help would be greatly appreciated thanx in advance. Tag: DskImage failed! Tag: 82251
  - 5
    - downloading problem Hi Iam working in a hardware kit which has PXA 270 processor. I couldnot download the image(NK.BIN) to the RAM of the hardware kit. Iam getting a debug message as "TAPI NOT READY". A closer look through the platform's release directory caused me to know that the EBOOT.bin files where missing. What files are actually needed for downloading?. How to overcome with this problem? What all components i should add to my platform? Thanks, Meribha Tag: DskImage failed! Tag: 82250
  - 6
    - Rotation mode for display driver in Wince5.0 Hi All I enable rotaton mode in my display driver in wince5.0, but it is abnormal in ToolBar. Who can help me? Tag: DskImage failed! Tag: 82240
  - 7
    - How to use WinCE machine as a USB Disk? Hi, I'm working with Platform Builder 5.0 to make WinCE image, for ARM B.B. Now, the image works well and all USB functions OK! But everytime when I connect to a new PC, it requires to install ActiveSync to transfer data, it is not convenient to user! I want to let WinCE machine works as a USB DISK, can I? and how to? Best regards, Jack Zhao Tag: DskImage failed! Tag: 82239
  - 8
    - Problems about the ARMV4I-based emulator BSP Hi, I am attempting to work with this emulator on platform builder 5.0 I followed the procedure just as using x86 emulator. But when I attach device, a error windows says "Your virtual machine may not have enough RAM allocated". But in the "target device connectivity options" I am using 128MB ram memory!! It could not run from Platform Builder 5.0, is it? But how to use it from Visual Studio 2005? Best regards, Jack Zhao Tag: DskImage failed! Tag: 82236
  - 9
    - Wscript(WHS) Is there anyway to get IE to successfully create a WHS object (Wscript) on these devices (CE 4.2)? Tag: DskImage failed! Tag: 82223
  - 10
    - SDCARDLIB debug link errors Hi, We have a SDIO driver that linked with SDCARDLIB. The build process is OK for retail build, but when I built for debug, I got the following errors: sdcardlib.lib(sdcardapistubs.obj) : error LNK2001: unresolved external symbol dpCurSettings sdcardlib.lib(sdmisc.obj) : error LNK2001: unresolved external symbol dpCurSettings sdcardlib.lib(sdmemapi.obj) : error LNK2001: unresolved external symbol dpCurSettings sdcardlib.lib(sddebug.obj) : error LNK2001: unresolved external symbol dpCurSettings I went to public\common\oak\drivers\SDCARD\SDCARDLIB, defined dpCursettings, then the linker error message are gone. Is there any QFE have already fixed the problems? Thanks Susan Tag: DskImage failed! Tag: 82220
  - 11
    - Icon resize/spzce at desktop in WinCE5.0 Hi, Our device based on WinCE5.0has a very high GPI panel, VGA on 2.4" panel. As default, the system fonts and icon are too small to be visible. We have increased font size, but icons will be overlapped by the bigger fonts on the desktop. How can i resize or space out the icons on the desktop? Thanks Susan Tag: DskImage failed! Tag: 82218
  - 12
    - Paging in Windows CE I'm trying to understand what "Paging" means under Windows CE. It seems to be different from Windows XPs pagefile? I havent seen good explanations on MSDN, the registry setting "Paging" for storage manger is explained "Set to 0 to disable paging. Set to 1 to enable paging. One is the default", which isn't too helpful. Can anyone please point me to a better summary, or maybe outline the "big picture" of what Paging means in WinCE, and maybe compare it to how a pagefile works for WinXP? Why would or wouldn't I use paging in a system? What does a normal PDA based on Windows CE use? I have no real-time requests. It would be very helpful, so thank you! Tag: DskImage failed! Tag: 82217
  - 13
    - Errors at startup Hello all! Excuse for my bad English. My board on ARM920 processor has 64M SDRAM begins at 30000000. I have very simple address table: DCD 0x80000000, 0x30000000, 64 ; 64 MB SDRAM DCD MEMCTRL_BASE, BWSCON, 1 ; Memory control register DCD USBHOST_BASE, USBHOSTBASE, 1 ; USB Host register DCD INT_BASE, SRCPND, 1 ; Interrupt Control register DCD DMA_BASE, DISRC0, 1 ; DMA control register DCD CLKPWR_BASE, LOCKTIME, 1 ; Clock & Power register DCD LCD_BASE, LCDCON1, 1 ; LCD control register DCD NAND_BASE, NFCONF, 1 ; NAND flash control register DCD UART0_BASE, ULCON0, 1 ; UART control register DCD PWM_BASE, TCFG0, 1 ; PWM timer register DCD USBDEV_BASE, 0x52000000, 1 ; USB device register DCD WATCH_BASE, WTCON, 1 ; Watchdog Timer register DCD IIC_BASE, IICCON, 1 ; IIC control register DCD IIS_BASE, IISCON, 1 ; IIS control register DCD IOP_BASE, PCONA, 1 ; I/O Port register DCD RTC_BASE, 0x57000000, 1 ; RTC control register DCD ADC_BASE, ADCCON, 1 ; A/D convert register DCD SSP_BASE, SPCON0, 1 ; SPI register DCD SD_BASE, SDICON, 1 ; SD Interface register DCD 0x00000000, 0x00000000, 0 ; End of Table (MB MUST BE ZERO!) Virtual addresses of registers are in range 0x90800000....0x91A00000. And simple config.bib: #define CHAIN_ADDRESS 80400000 CHAIN $(CHAIN_ADDRESS) 00001000 RESERVED pdwXIPLoc 00000000 $(CHAIN_ADDRESS) FIXUPVAR NK 80000000 00400000 RAMIMAGE CHAIN 80400000 00001000 RESERVED DRIVERS 80401000 001BF000 RAMIMAGE RAM 805C0000 03840000 RAM It seems, that here all is correct. In bootloader I load kernel image from NAND flash into SDRAM and then jump to it. But at system startup I see the following output (my own comments is in () ): Booting Windows CE version 4.20 for (ARM) &pTOC = 8000942c, pTOC = 80119908, pTOC->ulRamFree = 805f2000, MemForPT = 00000000 Configuring: Primary pages: 14345, Secondary pages: 0, Filesystem pages = 7172 Booting kernel with clean memory configuration: Memory Sections: [0] : start: 805f3000, extension: 00004000, length: 03809000 Sp=ffffc7cc ARMInit done. ............. .....(loading nk.exe)...... .....(loading coredll.dll)...... .....(loading filesys.dll)...... ............ 0x83def6cc LoadOneLibraryPart2: coredll.dll, 0, 0x0 0x83def6cc: LoadOneLibrary coredll.dll (coredll.dll) 0x83def6cc: OpenExe: coredll.dll 0x83def6cc: OpenExe: plain name coredll.dll 0x83def6cc: OpenExe coredll.dll: ROM: 8011999c 0x83def6cc: (10) o32rp->o32_realaddr = 03f91000 0x83def6cc: ChkDebug returns 1 0x83def6cc: lpszFileName = 'coredll.dll', pMod->bTrustLevel = 2 0x83def6cc: BasePtr is 03f90000 0x83def6cc: LoadO32 : section 0 0x83def6cc: (2) o32rp->o32_realaddr = 03f91000 0x83def6cc: virtualcopying 03f91000 <- 800b3000 (65a6b)! 0x83def6cc: VirtualCopy 03f91000 <= 800b3000 size=65a6b prot=20 0x83def6cc: MakePagePerms: 00000020 returns 0000000e 0x83def6cc: Scanning 102 pages. ixFirB=ffff83df, dwVMBase = 02000000 0x83def6cc: Scanning block 83dfc398 (ffff83df), ix=1 cPgScan=102 0x83def6cc: Scanning block 83dfc3a8 (0), ix=0 cPgScan=102 0x83def6cc: ScanRegion failed err=87 0x83def6cc: VirtualCopy failed. 0x83def6cc: LoadO32 Failed 0x83def6cc: LoadO32 failed 0x0000000e 0x83def6cc: LoadOneLibraryPart2: COREDLL.dll, 0, 0x0 0x83def6cc: LoadOneLibrary COREDLL.dll (COREDLL.dll) 0x83def6cc: OpenExe: COREDLL.dll 0x83def6cc: OpenExe: plain name COREDLL.dll 0x83def6cc: OpenExe COREDLL.dll: ROM: 8011999c 0x83def6cc: (10) o32rp->o32_realaddr = 03f91000 0x83def6cc: ChkDebug returns 1 0x83def6cc: lpszFileName = 'COREDLL.dll', pMod->bTrustLevel = 2 0x83def6cc: BasePtr is 03f90000 0x83def6cc: LoadO32 : section 0 0x83def6cc: (2) o32rp->o32_realaddr = 03f91000 0x83def6cc: virtualcopying 03f91000 <- 800b3000 (65a6b)! 0x83def6cc: VirtualCopy 03f91000 <= 800b3000 size=65a6b prot=20 0x83def6cc: MakePagePerms: 00000020 returns 0000000e 0x83def6cc: Scanning 102 pages. ixFirB=ffff83df, dwVMBase = 02000000 0x83def6cc: Scanning block 83dfc398 (ffff83df), ix=1 cPgScan=102 0x83def6cc: Scanning block 83dfc3a8 (0), ix=0 cPgScan=102 0x83def6cc: ScanRegion failed err=87 0x83def6cc: VirtualCopy failed. 0x83def6cc: LoadO32 Failed 0x83def6cc: LoadO32 failed 0x0000000e 0x83def6cc: VirtualFree @03f90000 size=6e000 freetype=4000 0x83def6cc: VirtualFree decommitting block 1f9 page 0. 0x83def6cc: Scanning 110 pages. ixFirB=ffff83df, dwVMBase = 02000000 0x83def6cc: Scanning block 83dfc398 (ffff83df), ix=0 cPgScan=110 0x83def6cc: Scanning block 83dfc3a8 (0), ix=0 cPgScan=110 0x83def6cc: VirtualFree failed. 0x83def6cc: DoImport Failed! Unable to import Library 'COREDLL.dll' for 'filesys.exe' 0x83def6cc: CreateNewProc failure! ................... 0x83def6cc: Data Abort: Thread=83def6cc Proc=805e8578 'filesys.exe' ................. 0x83def6cc: NKDispatchException(c204f960): Proc=805e8578 ControlPc=00000000 SP=c204fee0, PSR = 2000001f 0x83def6cc: CHECKTAKECRITSEC: Violation of critical section ordering at index 7, lpcs 805e8460 0x83def6cc: NK Kernel: DEBUGCHK failed in file d:\mckendric\private\winceos\coreos\nk\kernel\schedule.c at line 3865 0x83def6cc: ExceptionDispatch: pexi=c204f6e4 Pc=8002f394 0x83def6cc: addr 43800ae, id 1, sp c204f738, fsr=00000007, BVA = 8002f394 0x83def6cc: DEBUG_BREAK @8002f394 MD=1f Ignored. 0x83def6cc: NKDispatchException: returning failure. Flags=0 0x83def6cc: Unhandled exception c0000005: 0x83def6cc: Terminating thread 83def6cc 0x83def6cc: GuardCommit 043800ae 0x83def6cc: ExceptionDispatch: pexi=c204fce4 Pc=03fa5e04 0x83def6cc: addr 5fff7ec, id 4, sp c204fd0c, fsr=00000007, BVA = 03fa5e04 0x83def6cc: Auto-committing 05fff7ec 0x83def6cc: ExD: ID_DATA_ABORT 0x83def6cc: ExD: addr = 05fff7ec 0x83def6cc: ProcessPageFault: Read @05fff7ec, InSysCall() = 0 ............ 0x83def6cc: Unhandled exception c0000005: 0x83def6cc: Exception 'Data Abort' Thread=83def6cc AKY=00000003 PC=2000001f BVA=05fff7ec 0x83def6cc: R0=8002fa7c R1=00000020 R2=ffffcbac R3=04060000 0x83def6cc: R4=00000000 R5=00000000 R6=00000000 R7=00000000 0x83def6cc: R8=00000000 R9=00000000 R10=00000000 R11=00000000 0x83def6cc: R12=c204fd68 SP=8002f9f0 Lr=03fa5dc8 Psr=2000001f 0x83def6cc: Can't terminate thread 83def6cc, sleeping forever ........ NK Kernel: DEBUGCHK failed in file d:\mckendric\private\winceos\coreos\nk\kernel\schedule.c at line 4214 Who can explain me why filesys.exe can't load coredll.dll? I think that this error causes the next following exceptions and system hang. Or this is normal situation? But then whence occur data aborts? Some errors causes in VirtualCopy.It means that I have incorrect memory configuration?... As you saw, my address table and config.bib is very simple - there is no place to take a mistake!.. I tried to enable/disable data cache, set various combinations of C and B bits for cache configure - all this has not helped. How to correct this errors? Thanks for your help! Regards, Sergey. Tag: DskImage failed! Tag: 82212
  - 14
    - WINCE 5.0 Wireless Signal Strength Bug ?? Dear Sir, I use PXA27X and WINCE 5.0 to develop my project. I also use Marvel as WiFi main Chip. I do some special Test and I found some strange result. //========== // Case-1 //========== Step-1 : (Access Point (AP-1) + Power + LAN) , Power Off system Step-2 : Power on system , then WZCDialog will be displayed in the desktop , and SignalStrengthThread will be hook. Select AP-1 Step-3 : Move my device , then the SignalStrength is changable. Step-4 : Moev my device to get "excellent" SignalStrength Step-5 : Plug out the LAN which is in AP-1 (AP-1 + Power ,NO LAN) Step-6 : Move my device to long distance , but the SignalStrength is still "excellent". Step-7 : Then ask my partner to plug in LAN in to AP-1 (AP-1 + Power + LAN) Step-8 : The SignalStrength will be changed as "Very Low" immediately. >From Step-5 to Step-8 , Is it bug ? //========== // Case-2 //========== Step-1 : (Access Point (AP-1) + Power + LAN) , Power Off system Step-2 : Power on system , then WZCDialog will be displayed in the desktop , and SignalStrengthThread will be hook. Select AP-1 Step-3 : Move my device , then the SignalStrength is changable. Step-4 : Moev my device to get "excellent" SignalStrength Step-5 : Plug out the Power which is in AP-1 (AP-1 + LAN ,NO Power) Step-6 : The SignalStrength will be changed as "No signal" immediately. Step-7 : Plug in the Power which is in AP-1 (AP-1 + Power + LAN ) Step-8 : The SignalStrength will be changed as "excellent" immediately. Step-9 : Plug out the Power which is in AP-1 (AP-1 + LAN ,NO Power) Step-10 : The SignalStrength will be changed as "No signal" immediately. Step-11 : Plug out the LAN and Plug in Power which is in AP-1 (AP-1 + Power , NO LAN) Step-12 : The SignalStrength will be changed as "excellent" immediately. Step-13 : Move my device to long distance , but the SignalStrength is still "excellent" Step-14 : Then ask my partner to plug in LAN in to AP-1 (AP-1 + Power + LAN) Step-15 : The SignalStrength will be changed as "Very Low" immediately. >From Step-11 to Step-15 , Is it bug ? //========== // Case-3 //========== Step-1 : (Access Point (AP-1) + Power ,NO LAN) , Power Off system Step-2 : Power on system , then WZCDialog will be displayed in the desktop , and SignalStrengthThread will be hook. Select AP-1 Step-3 : Move my device to close AP-1 Step-4 : The SignalStrength is always as "No signal". Step-5 : Then ask my partner to plug in LAN in to AP-1 (AP-1 + Power + LAN) Step-6 : The SignalStrength will be changed as "excellent" immediately. >From Step-3 to Step-6 , Is it bug ? //========== // Case-4 //========== Step-1 : (USB Dongle Ad-Hoc mode (Ad_hoc-2) + USB) , Power Off system Step-2 : Power on system , then WZCDialog will be displayed in the desktop , and SignalStrengthThread will be hook. Select Ad_hoc-2 Step-3 : Move my device , then the SignalStrength is changable. Step-4 : Moev my device to get "excellent" SignalStrength Step-5 : plug USB cable which is in Ad_hoc-2 , (Ad_hoc-2 , NO USB) Step-6 : Move my device to long distance , The SignalStrength is "excellent" Step-7 : Then ask my partner to plug in USB cable in to Ad_hoc-2 (Ad_hoc-2 + USB) Step-8 : The SignalStrength will be changed as "Very Low" immediately. >From Step-5 to Step-8 , Is it bug ? //---------------------------------------------------------------- I do NOT know who is the issue owner , Microsoft or Marvel . Because "SignalStrengthThread" call "GetSignalStrength" to get SignalStrength , and "GetSignalStrength" through "DeviceIoControl" to call Marvel Driver. Is this the bug of Microsoft WINCE 5.0 Wireless architecture ? Or Does Marvel Driver response an error SignalStrength ? BR, dirwdirw.tw Tag: DskImage failed! Tag: 82210
  - 15
    - Win CE memory pages I am looking into the workings of memory pages within the CE environment. I am currently doing my investigations on an iPAQ PDA, PPC2003, use PB4 and EVC4 (but I don't think this is a device specific issue). My question is, how come if I remove some memory pages with the GetKPhys() function then do a soft reset of the device, the pages are available again? Looking though physmem.c (in PB4) then it seems that the page links are zeroed and the pUseMap set to be used when this function is called. I would have thought that on a reboot (after the soft reset) the OS wouldn't be able to see these pages (until a hard reset happened). Could anyone please fill in my knowledge gap here please. Thanks in advance Tag: DskImage failed! Tag: 82199
  - 16
    - problem with source filter registration hi, i have written a push source filter(directshow) for video format , which is working fine for desktop. I wrote that for "wince" using EVC++ , while building and attaching the dll to emulator evc++ is showing successfully registerd. after getting in to emulator if i try to register or unregister it , this error is getting displayed . "fatal applicataion error with regsvrce.exe , exception 0XC0000005 " . because i am trying to register with regsvrce. and when i am trying to use this filter in dshow application . i am getting same exception with that application. surprisingly when i look in to the registry of emulator using ceregedit, this source filter is present there. i am not getting such problem with transform filter and dmo's that are developed with EVC++, they are succesfully getting registered and unregistered . pls help me with your valuable advice thanks inadvance chaitu.. Tag: DskImage failed! Tag: 82195
  - 17
    - USB can't work, anybody help? I use CE 5.0 to build an image on CEPC:X86,I have added all of the features of "USB function of BUS driver";"USB funtion of Clients";"USB Host";and I also have added the features "USB Human Input Device Class Driver","USB Storage Class Driver",but when I enter in CE system and plus the usb mouse,I find the led of the mouse is bright,but the mouse can't work,then I plus the ¡°USB disk",It's led can also be bright,but it can't work too. Why? anybody helps is appreciate. thanks! Tag: DskImage failed! Tag: 82192
  - 18
    - Makeimg not copying project files to FLATRELEASEDIR Hi All, I am working with PB 5.0 on an XP Pro - SP2 machine. I recently lost the ability to make a change in Project.reg, launch Makeimg (Make Run-Time Image) and see my change in the freshly generated reginit.ini. As a temporary workaround, I added a Custom Build Action to my Project Settings in order to enforce the copy of the Project files in the Pre-Make Image step: copy %_PROJECTOAKROOT%\files\project.* %_FLATRELEASEDIR% Looking at the output, I discovered that there was a file access issue: makeimg: run command: cmd /C C:\WINCE500\public\common\oak\misc\pbpremakeimg Generating PBWorkspace Custom makeimg build step batch Files to C:\WINCE500\PBWorkspaces\EBB615EX\WINCE500\EBB615_x86\oak Done Generating PBWorkspace Custom makeimg build step batch Files Doing PreMakeImage Custom Build Actions C:\WINCE500\PBWorkspaces\EBB615EX\WINCE500\EBB615_x86\oak\files\project.bib Le processus ne peut pas acc,der au fichier car ce fichier est utilis, par un autre processus. C:\WINCE500\PBWorkspaces\EBB615EX\WINCE500\EBB615_x86\oak\files\project.dat Le processus ne peut pas acc,der au fichier car ce fichier est utilis, par un autre processus. C:\WINCE500\PBWorkspaces\EBB615EX\WINCE500\EBB615_x86\oak\files\project.db Le processus ne peut pas acc,der au fichier car ce fichier est utilis, par un autre processus. C:\WINCE500\PBWorkspaces\EBB615EX\WINCE500\EBB615_x86\oak\files\project.reg 0 fichier(s) copi,(s). Le processus ne peut pas acc,der au fichier car ce fichier est utilis, par un autre processus. Done Doing PreMakeImage Custom Build Actions In english, the offending message states that "The process can't access the file because this file is used by another process". Of course, I am unable to see what other process could be accessing my Project files. If I then "touch" the files with Platform Builder (i.e. forcing PB to write them to the disk), the copy works, until the next boot... Any hints and sugestions are welcome. Remi Tag: DskImage failed! Tag: 82189
  - 19
    - direct3d mobile driver Hi, I'm going to develop an application using direct3d mobile interface based on windows ce 5.0. I wonder PDAs based on WindowsCE 5.0 support applications using direct3d mobile interface as default. If there are PDAs based on WindowsCE 5.0 do not support direct3d mobile, Can I distribute an application and direct3d mobile driver? and, is direct3d mobile driver independent of CPUS such as x86 or arm(xscale) ? white Tag: DskImage failed! Tag: 82185
  - 20
    - RAS on Virtual Serial Port (ethernet) Hi we have WinCE4.2 device . I want to add web browsing ( internet) in my device .I am planing to use RAS . This will use a virtual serial port ,that will actually be mappped to ethernet controller for sending and receiving data. and this etehrnet cabel will be connected to CDMA MODEM. 1. Is it feseable ..? 2. Just sending and receiving data through ethernet controller(No need to impelement NDIS or miniport) ..am i correct ot not..? Please answer ..so that i can procede Regards Manish Tag: DskImage failed! Tag: 82184
  - 21
    - Ceplayer not work Dear All, I meet a problem when I change the display driver. Anyone can help me ? I use the via display dirver to instead of the ddi_flat. The system is ok. But the ceplayer can not display any pictures, but sound is not. Thanks Gpeica Tag: DskImage failed! Tag: 82179
  - 22
    - Problem in Jumbing to image Hello, I am working in Pxa270 with Wince5.0. After download the Nk.bin in Sdram,it cant jumb to image. i am getting the given below in my hyperterminal. ROMHDR at Address 80100044h Download successful! Jumping to image at 0x80101000 (physical 0xA0101000)... !OEMEthGetFrame Got EDBG_CMD_JUMPIMG Got EDBG_CMD_CONFIG, flags:0x0000000F >>here stoped(nothing happend after this)<<< is it kernel initialization problem? if it is, please let me know the possibilities to solve this problem. Do i need any modification in config.bib? please help me . here i have given config.bib and oemaddress table. config.bib ----------- MEMORY IF IMGFLASH! ; Name Start Size Type ; ------- -------- -------- ---- RSVD 80000000 000FF000 RESERVED ARGS 800FF000 00001000 RESERVED NK 80100000 03000000 RAMIMAGE RAM 83100000 00F00000 RAM ENDIF IF IMGFLASH RSVD 80000000 000FF000 RESERVED ARGS 800FF000 00001000 RESERVED NK 86600000 03000000 RAMIMAGE RAM 80100000 03F00000 RAM ENDIF ; Reserve ZBANK virtual block (No physical memory ; is required to back this virtual range). ; ZBANK 96500000 00100000 RESERVED CONFIG IF IMGFLASH ! AUTOSIZE=ON ENDIF KERNELFIXUPS=ON ; @CESYSGEN IF !NK_NKNOCOMP COMPRESSION=ON ; @CESYSGEN ENDIF !NK_NKNOCOMP ; @CESYSGEN IF NK_NKNOCOMP COMPRESSION=OFF ; @CESYSGEN ENDIF NK_NKNOCOMP IF IMGPROFILER PROFILE=ON ELSE PROFILE=OFF ENDIF ; ; ROMFLAGS is a bitmask of options for the kernel ; ROMFLAGS 0x0001 Disallow Paging ; ROMFLAGS 0x0002 Not all KMode ; ROMFLAGS 0x0010 Trust Module only ; IF IMGTRUSTROMONLY IF IMGNOTALLKMODE ROMFLAGS=12 ELSE ROMFLAGS=10 ENDIF ELSE IF IMGNOTALLKMODE ROMFLAGS=02 ELSE ROMFLAGS=00 ENDIF ENDIF g_oalAddressTable ------------------------- DCD 0x80000000, 0xA0000000, 64 ; SANDGATEII: SDRAM (64MB). DCD 0x84000000, 0x5C000000, 1 ; InternalSRAM DCD 0x84100000, 0x58000000, 1 ; Internal memory PM registers. DCD 0x84200000, 0x4C000000, 1 ; USB host controller. DCD 0x84300000, 0x48000000, 1 ; Memory controller. DCD 0x84400000, 0x44000000, 1 ; LCD controller. DCD 0x84500000, 0x40000000, 32 ; Memory-mapped registers DCD 0x88500000, 0x0C000000, 1 ; SANDGATEII: Ethernet controller. DCD 0x88600000, 0x04000000, 32 ; Secondary flash (32MB). DCD 0x8A600000, 0x00000000, 1 ; nCS0: Boot Flash (64MB). DCD 0x00000000, 0x00000000, 0 ; end of table thanks, sakthi Tag: DskImage failed! Tag: 82177
  - 23
    - WARNING: Marvell 88W8385 Based Wi-Fi Solutions on Windows CE Hey guys. I've been hesitating to post something like this, but I think I'm frustrated enough at this point to go ahead and do it. If anyone out there is considering using any Wi-Fi modules based on the Marvell 88W8385 chipset under Windows CE 5.0, I strongly recommend you reconsider. Or, at least put whatever you are considering through a very rigorous evaluation before making any design commitments. The company I'm doing work for had committed to a design that used this chipset on a CF interface Wi-Fi module. The assumption was that they would be able to use the NDIS mini-port driver provided by Marvell in their software platform just as they had done with many CF Wi-Fi solutions in the past. Unfortunately, this was not the case. Marvell has provided them with no direct support whatsoever. The module manufacturer they were working with has provided them with no support whatsoever. The sales organization that they were purchasing these modules through managed to provide them with two different drops of driver source code. Neither worked on their platform as-is. After approximately 6 weeks of software effort, they managed to achieve minimal Wi-Fi functionality under very controlled setups. This was not sufficient for their requirements. They are currently in quite a bit of a pickle. Is anyone out there successfully using this chipset? If so, who's drivers are you using? Are there any contacts for people willing to provide high-quality, production-grade software support for this chipset under Windows CE? For everyone else... If you're anything other than a Tier 1 customer to Marvell, be very careful. If any module providers are promising you drivers, make sure you can evaluate them before making any design decisions. (I feel like I just went to confession.) "Frustrated" Tag: DskImage failed! Tag: 82166
  - 24
    - Howto eject USB mass storage disk? I expose an USB mass storage partition from my custom Windows CE device. For instance, I can connect a USB cable between my device and a Windows XP computer, and it will appear as a hard drive in Windows XP. From Windows XP I can right click the drive "D:" from "My computer" and select "Eject", which will cause the filesystem to flush correctly on my device and have it unmounted from Windows XP. So eject works fine if initiated from Windows XP. But is there a way from my device to force this "Eject" to happen? I haven't found a way to initiate this, maybe I'm asking for a feature that doesn't exist in USB? Has anyone experience from this? Tag: DskImage failed! Tag: 82165
  - 25
    - Problem with suspend/resume on LAN91C111 Hello, I am trying to implement suspend / resume functionality for my LAN91C111 miniport driver on CE 5.0. I'm running into a problem that keeps it from functioning on power up. I've followed the directions in the SMSC documentation for this device for powering down and then powering up the device. I power up and down in response to OID_PNP_SET_POWER requests from NDIS. I believe I am powering down and powering up properly, but my network connection doesn't work after resume. Using netmon, I have verified that my NIC is sending packets out over the network after resume. For example, when I ping my desktop from my CE device, I can see the packets in netmon. Also, when I ping the device from my desktop, I receive the packets on my device (verified by using netstat.exe). I can also see my driver responding to RX interrupts. It seems to me then that my hardware is set up properly on resume, but somehow the protocol driver is messed up. Does anyone have any suggestions for me? Is there a way to re-init the protocol drivers from my miniport driver? Thanks a lot, Jason Tag: DskImage failed! Tag: 82164
- Next
  - 1
    - Virtual target that's not the emulator I run my WinCE development system on a virtual machine, which makes it impossible to use the emulator platform for testing. So I created another virtual machine, meant to replace the emulator - it brings up eboot and away we go - almost. The virtual machine presents the NIC as an AMD PCNet. How can I modify and/or configure eboot to work with that adapter? -- #include <standard.disclaimer> _ Kevin D Quitt USA 91387-4454 96.37% of all statistics are made up Tag: DskImage failed! Tag: 82158
  - 2
    - USB data Transfer question I wrote a USB to Serial driver on CE ARM device. and the write function which write data from USB host to client works fine, but when tried to read data from client, just occasionally get the serial data, most likely, host only read partial data. USB analizer tells that Writing from USB host to Client works fine, but always error when I tried to read data from Client, no matter I got data complete or not. eg. if I write "Hello" in Client, I can read "Hello" in the beginning some times, then I'll get "HHH......" or "lllll....." or "oooo..." randomly. The USB analizer always tells "no data". Any ideas? Tag: DskImage failed! Tag: 82148
  - 3
    - 5.0 CEPC Image Problem Hi, I've got a problem I haven't been able to figure out. The problem occurs when trying to boot the image from CF. The CF is connected to an IDE port. Here are the steps I used: 1. Built a debug image 2. Downloaded to CEPC via ethernet - Runs fine. CF fully functional via ATAPI driver. 3. Built a release image 4. Download to CEPC via ethernet - Runs fine. CF fully functional via ATAPI driver. 5. Boot system from CF using LoadCEPC.exe. System loads but doesn't start. I've tried this with and without the hive-based registry and the result is the same. PB is current with all QFEs. I'd welcome any suggestions for things to try. Thanks, Jim Frazer Tag: DskImage failed! Tag: 82146
  - 4
    - Implementing Networking in WincE4.2 device we are having a WinCE4.2 based device.I have following questions . Q1 .If we have RAS service(using USB or serial) in our device for internet Access in that case do we need to have ethernet controller..? Q2. If we want to implement networking facility ,then CS8900 ethernet controller will be ok..? Can anybody suggest wht chip set be good to use. Please reply Manish budhia Tag: DskImage failed! Tag: 82142
  - 5
    - Can't install SDK Ok, I first installed Platform Builder. Turns out you can only compile trivial applications with Platform Builder. So I installed eMbedded Visual C++ 4.0. Then I made a SDK from platform builder. When I try to install the .msi file it tells me that "Software development tools required to use this SDK... are not installed...", and won't let the SDK install. So what am I supposed to do now??? I'm coming to this from a linux background and finding it absurdly difficult. Has anyone else made this transition - can you offer some help in trying to grasp Microsoft's philosophy? My first impression is that I haven't seen anything this sloppy since OS/2, but I'm trying to keep an open mind. Tag: DskImage failed! Tag: 82141
  - 6
    - How to let ActiveSync NOT change the deivce time ? Hi, When I connect device with PC by ActiveSync, I found system time in device will be changed according to Time Zone Setting. It seems time sync is done when ActiveSync is finished. How to prevent ActiveSync from changing the system time in device ? I do not want the solution in PC side because it is not convenient to ask users to change something in their PC when they use our devices. Is it possible to disable the "Time Change by ActiveSync" in device side ? Thanks. Yu. Tag: DskImage failed! Tag: 82134
  - 7
    - ExTapi not working hi, I tried to run the ExTAPI application which came with the ssamples of smartphone 2002 sdk. I built it and loaded that in the Motorola MXP200 smartphone. It gave me an error message "unable to get ExTAPI information" The application is not at all getting launched. Has anyone tried that sample? The Tapi sample is working fine. Tag: DskImage failed! Tag: 82132
  - 8
    - Can't debug output from Visual Studio 2005 with Platform Builder WM50 Hi, I'm developing WM50 PPC with Platform Builder for Windows Mobile 5.0. As you know, PB has KITL Debugging Functionality. Problem is this. When I made application(test.exe) with EVC++ 4.0, I can download & make BreakPoint at test.exe with PB.(and stop at that point) But, if I make test.exe with Visual Studio 2005, I can download but can't make BreakPoint. It acts like that symbol info is not loaded. I found MS's doc. explaining symbol info file(pdb) from VS2005 is not compatible with PB 5.0. But, their workaround is availble for only Platform Builder for Windows CE 5.0, not Platform Builder for Windows Mobile 5.0. Can you help me to solve this problem? Thanks. Tag: DskImage failed! Tag: 82131
  - 9
    - How to show the Software Input Panel when CE 5.0 boot-up ? Dear All, When CE boot-up, I must hit the SIP icon on task bar to show the visual keyboard. I need a function that SIP shown automatically when CE boot-up. Is there any way to do this? Thanks. Tag: DskImage failed! Tag: 82129
  - 10
    - Registry Settings For an Ethernet Device Hi, We are developing a driver for an ethernet device which works on PCI Bus. We are having problems with the registry setting of the device. Here are the settings: [HKEY_LOCAL_MACHINE\Comm\MyDevice] "DisplayName"="My Ethernet Driver" "Group"="NDIS" "ImagePath"="MyDevice.dll" [HKEY_LOCAL_MACHINE\Comm\MyDevice\Linkage] "Route"=multi_sz:"PCI\\MyDevice1" [HKEY_LOCAL_MACHINE\Comm\PCI\MyDevice1] "DisplayName"="My Ethernet Driver" [HKEY_LOCAL_MACHINE\Comm\PCI\MyDevice1\Parms\TcpIp] "EnableDHCP"=dword:1 "DefaultGateway"="" "LLInterface"="" "UseZeroBroadcast"=dword:0 "IpAddress"="192.168.56.199" "Subnetmask"="255.255.255.0" "AutoIP"="192.168.56.199" "AutoMask"="255.255.255.0" "AutoSubnet"="192.168.56.0" [$(PCI_BUS_ROOT)\Template\MyDevice] "Class"=dword:02 "SubClass"=dword:00 "ProgIF"=dword:00 "VendorID"=multi_sz:"110A" "DeviceID"=multi_sz:"4036" "Dll"="NDIS.dll" "Entry"="NdisPCIBusDeviceInit" "Prefix"="EDD" "MiniPort"="MyDevice" "IsrDll"="eddisr.dll" "IsrHandler"="ISRHandler" At the begining of the load phase of the driver, a debug message appears: "DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Drivers\BuiltIn\PCI\Instance\MyDevice1). Driver cannot be unloaded." But the driver is loaded succesfully. The device appears under "Network and Dial-Up Connections" with the name "PCI-MYDEVICE1" and when the settings menu is opened, DisplayName can be seen as "'My Ethernet Driver' Settings". Nevertheless, when an "Ipconfig /all" command is executed, the device appears with Adapter Name : "PCI\MYDEVICE1" and Description:"PCI\MYDEVICE1". The questions are: 1 - Why are deprecated load instructions found? 2 - How can we change AdapterName and Description? 3 - Most important, is it right to set "Route"=multi_sz:"PCI\\MyDevice1" under "Comm\MyDevice\Linkage"? When we set "Route"=multi_sz:"MyDevice1", an additional registry entry appears: "comm\MyDevice1" and we can not see a friendly DisplayName under "Network and Dial-Up Connections", just see "PCI\MyDevice1" again. Thanks, Osman Tag: DskImage failed! Tag: 82128
  - 11
    - Emulator for ARMV4 Hi, There's only an X86 Emulator in Platform Builder 5.0, Is there an ARMV4I Emulator? I want to debug my ARM version code on PC directly(without connecting to my B.B), how to? Best regards, Jack Zhao Tag: DskImage failed! Tag: 82120
  - 12
    - Cirrus EP931x CPU FPU (MaverickCrunch) support? Does anyone know if the WinCE 5.0 ARM compiler supports the hardware floating point coprocessor (MaverickCrunch) used in the Cirrus EP931x range of CPUs? We are interested in using one of these processors, but need hardware floating point support in the compiler. I understand the "standard" ARM FPUs are supported, but it looks like MaverickCrunch is a different animal... Andrew Tag: DskImage failed! Tag: 82116
  - 13
    - RAS service for Internet Access Hi ! we want to access Internet from our device (winCE4.2 RAS) using CDMA MODEM(Using PPP) . I let you know that communication media between MODEM and our device will be ethernet cabel. We don't have in build eithernet controller ..we are planing to use CS8900 ethernet controller. What steps i need to do in MY BSP...? Will it require to implement NDIS..?or RAS can be configured to use this ethenet connection. How it will be possible ..? Please answer Regards Manish Tag: DskImage failed! Tag: 82115
  - 14
    - Platform Builder error building Mobile Handheld(windows ce device) What is the meaning of below error while building and sysgen Mobile Handheld ( windows ce device) Thanks Error - cannot open input file C:\WINCE500\PBWorkspaces\Mobile2\RelDir\CEPC_x86_Release\postproc\nlscfg.inf makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). makeimg: FATAL ERROR: Command returned non-zero exit code 1 (dec). Tag: DskImage failed! Tag: 82114
  - 15
    - Establishing RNDIS over USB I am trying to figure out what are the necessary registry settings, platform builder 5.0 settings, autostart exes on the device, and client side .inf and driver files I need to be able to perform PPP over USB. I have a PXA270 processor that I added RNDIS support to. I am trying to setup the OS such that when the device is plugged via USB to a PC it shows up as a network device. I would like to be able to verify communications via WinSock over this connection. Does anyone know what I need to do to set this all up. Currently, I have added a RAS entry on the device side to try to establish a connection. If I have ActiveSync running the device gets and IP address assigned but the PC side has ActiveSync connecting forever and I never see an IP address. Plus I would like to not use ActiveSync. Thanks Tag: DskImage failed! Tag: 82111
  - 16
    - command line tools Does anyone know how to build command line tool to run on windows ce 5.1 build 1702? can we use Platforma builder to build the cmd.exe ? thanks Tag: DskImage failed! Tag: 82100
  - 17
    - CE 5.0 TASKMAN Shell -- How???? Hi all. We just moved from CE 4.20 to 5.0, and we're trying to build a desktop-less image. With 4.20 we simply, according to the MSDN docs, included the Standard Shell, and defined __SYSGEN_TASKMAN (2 leading underscores) as 1 in the environment variables, and it always worked fine. The difference between the 5.0 documentation and 4.20, is very subtle. in 4.20 the documentation says to define _SYSGEN_TASKMAN as 1, but the 5.0 docs say SYSGEN_TASKMAN as 1 (no leading underscore). Now, i've tried one, two and three underscores leading the string, but i always get the taskbar, trash, my computer and the CE desktop. Anything i'm missing here? -- P Tag: DskImage failed! Tag: 82087
  - 18
    - SYMBOL_LA4137 Hi I am trying get the Symbol La-4137-1020 card to work in our wince.net 4.2 based hardware, but all I get is a dialog box title 'Unidentifed PCCard Adapter and an option the enter the name of the driver. I have added the following files to platform.bib nictt.exe mudll.dll evmon.exe kerb5.dll cewdm.dll trans.dll netwlan.dll nictt.htm splash.wav ssping.wav ssroam.wav arrowr.2bp I added the following to platform.reg [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\TRANS] "Prefix"="PRT" "Dll"="TRANS.dll" "Index"=dword:1 "Order"=dword:3 ; TYPE 2 TRILOGY [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Symbol_Technologies-LA4111_Spectrum24_Wireless_LAN_PC_Card-077d] "Dll"="NDIS.dll" "Prefix"="NDS" "Miniport"="NETWLAN" "Index"=dword:1 ; TYPE 3 TRILOGY [HKEY_LOCAL_MACHINE\Drivers\PCMCIA\Symbol-Spectrum24_LA4100_Series_WLAN_PC_Card-e063] "Dll"="NDIS.dll" "Prefix"="NDS" "Miniport"="NETWLAN" "Index"=dword:1 [HKEY_LOCAL_MACHINE\Comm\NETWLAN] "DisplayName"="Spectrum 24 802.11b" "ImagePath"="NETWLAN.dll" "Group"="NDIS" [HKEY_LOCAL_MACHINE\Comm\NETWLAN\Linkage] "Route"=multi_sz:"NETWLAN1" [HKEY_LOCAL_MACHINE\Comm\NETWLAN1] "DisplayName"="Spectrum 24 802.11b" "ImagePath"="NETWLAN.dll" "Group"="NDIS" [HKEY_LOCAL_MACHINE\Comm\NETWLAN1\Parms\TcpIp] "EnableDHCP"=dword:1 "IpAddress"="0.0.0.0" "Subnetmask"="0.0.0.0" "DefaultGateway"="0.0.0.0" "DNS"="0.0.0.0" "WINS"="0.0.0.0" "UseZeroBroadcast"=dword:0 [HKEY_LOCAL_MACHINE\Comm\NETWLAN1\Parms] "AdapterModel"="Spectrum 24 802.11b" "Version"="3.0.0.0" "Password"="3745A4CA1FD2D1CFC10041C7576C0E6423A815E6D4D094C8D87441C26A6C0211153DDE9C851085" "PowerIndex"=dword:1 ; PSP "RogueAPDetection"=dword:1; "InterruptNumber"=dword:03 ;; "IoMapping"=dword:0 ; 0=NDIS, 1=PCMCIA (1 for WCE211,PPC2000) (0 forWCE300, PPC2002); "IoBaseAddress"=dword:300 ;; "IoLength"=dword:46 ;; "MemoryMappedBaseAddress"=dword:D0000 ;; "MemoryMappedSize"=dword:1000 ;; "PowerIndex"=dword:1 ;; "CardType"=dword:0 ; PCMCIA; "Environment"=dword:2 ; WINCE; "BusType"=dword:8 ; PROVIDED BY NDIS; "BusNumber"=dword:0 ; PROVIDED BY NDIS; "NetworkAddress"=dword ; PROVIDED BY NDIS; "InterruptNumber"=dword:03 ; 3; "IoBaseAddress"=dword:300 ; 768; "IoLength"=dword:46 ; 70; "MemoryMappedBaseAddress"=dword:D4000 ;; "MemoryMappedSize"=dword:1000 ;; "PowerIndex"=dword:1 ; PSP; "Channel"=dword:0 ; 0; "Ess_TxPower"=dword:0 ; AUTO; "Adhoc_TxPower"=dword:0 ; FULL; "LongPreamble"=dword:0 ; ENABLED; "Diversity"=dword:0 ; BOTH ANTENEA; "PCCARDPacketFilter"=dword:0B ; BROADCAST, DIRECTED, AND MULTICAST; "DTIM_Delay"=dword:1 ; 1; "RTS_Threshold"=dword:640 ; 1600; "FragmentationThreshold"=dword:0 ; 0; "MBIT_11"=dword:1 ; ENABLED; "MBIT_5_5"=dword:1 ; ENABLED; "MBIT_2"=dword:1 ; ENABLED; "MBIT_1"=dword:1 ; ENABLED; "IntlRoaming"=dword:0 ; DISABLED; "PortType"=dword:1 ; BSS; "Mandatory_BSS_ID"="" ; BLANK; "ESS_ID"="ANY" ; ANY; "EncryptionKeyId"=dword:0 ; KEY 0; "MUEncryptionAlgorithm"=dword:1 ; OPEN SYSTEM; "StationName"="" ;; "Provider"="Symbol" ;;[HKEY_LOCAL_MACHINE\Comm\Cxport]; Enable the device to suspend while communicating;"NoIdleTimerReset"=dword:1But it still refuses to recognise the card and propts me to enter the nameof the driver.Regards Tag: DskImage failed! Tag: 82082
  - 19
    - "Empty file name" I'm trying to port a rather large appliction to WinCE 5.0 using Platform Builder. I'm just evaluating WinCE at this point, and so far it doesn't look like Platform Builder is designed for large, multi-directory applications. So I moved all the source files to one directory. If I build with clean most of the sources compile, with a few errors. If I fix those errors and then re-build, I get: BUILD: [00:0000000009:ERRORI] Empty file name. I can find no clue as to what this means. And btw, the doc on running BUILD.EXE from a command line - the -x options in the doc do not match what BUILD.EXE recognizes. Close, but not the same. Tag: DskImage failed! Tag: 82080
  - 20
    - Windows CE 5.0 boot failure when USB thumb drive left attached I have a Windows CE 5.0 image on a system that works fine until power is cycled with a USB thumb drive left attached. The system enters a state of constant reboot with the USB drive attached. Removing the USB drive results in an eventual successful CE load (it may take several load / reboot attemtps). Any help, thoughts, or suggestions would be appreciated... Here is the debug output from a load failure: Debug Serial Init SysInit: GDTBase=80fa40e8 IDTBase=80ff6340 KData=81015800 Windows CE Kernel for i486 Built on Jun 24 2004 at 18:28:19 g_pPageDir = 8102e000 PCIBIOS:: BIOS Address static map to addr=a00e0000 GetPicRoutingIrqTable: Start search_pci_bios start CE Ethernet Bootloader found 32Bit BIOS Entry master_bios32=a00f79b0 bios32_call_offset=1d850 for CE/PC Return from First BIOS EAX=49435000 EBX=fd850,ECX=7b0 EDX=12c 32 PCI BIOS offset located.addr=1d97c 32 PCI BIOS Present EDX=20494350,EAX=1 EBX=f0210,ECX=700 +GetRoutingOption search_pci_routing search_pci_routing found entry =a00fdf50 CE/PC GetRoutingOption, found ROM version for Routing table. GetRoutingOption return SUCCESS .AH=0 canConfiguredIrq with PCI Exclusive Irq Bit (wExClusive) =0 ScanConfigureIrq: BufferSize = 112 @ address 80ff9daa ScanConfigureIrq: for Bus=0 ,Device=19 SlotNumber=0 INTA_LinkValue=1,INTA_IrqBitMap=def8 INTB_LinkValue=0,INTB_IrqBitMap=def8 INTC_LinkValue=0,INTC_IrqBitMap=def8 INTD_LinkValue=0,INTC_IrqBitMap=def8 ScanConfigureIrq: LinkNumber=1 associated with irq=11 ScanConfigureIrq: for Bus=0 ,Device=15 SlotNumber=0 INTA_LinkValue=1,INTA_IrqBitMap=def8 INTB_LinkValue=0,INTB_IrqBitMap=def8 INTC_LinkValue=0,INTC_IrqBitMap=def8 INTD_LinkValue=0,INTC_IrqBitMap=def8 ScanConfigureIrq: LinkNumber=1 associated with irq=11 ScanConfigureIrq: for Bus=0 ,Device=16 SlotNumber=0 INTA_LinkValue=2,INTA_IrqBitMap=def8 INTB_LinkValue=0,INTB_IrqBitMap=def8 INTC_LinkValue=0,INTC_IrqBitMap=def8 INTD_LinkValue=0,INTC_IrqBitMap=def8 ScanConfigureIrq: LinkNumber=2 associated with irq=10 ScanConfigureIrq: for Bus=0 ,Device=10 SlotNumber=1 INTA_LinkValue=1,INTA_IrqBitMap=def8 INTB_LinkValue=2,INTB_IrqBitMap=def8 INTC_LinkValue=3,INTC_IrqBitMap=def8 INTD_LinkValue=4,INTC_IrqBitMap=def8 ScanConfigureIrq: for Bus=0 ,Device=11 SlotNumber=2 INTA_LinkValue=2,INTA_IrqBitMap=def8 INTB_LinkValue=3,INTB_IrqBitMap=def8 INTC_LinkValue=4,INTC_IrqBitMap=def8 INTD_LinkValue=1,INTC_IrqBitMap=def8 ScanConfigureIrq: for Bus=0 ,Device=12 SlotNumber=3 INTA_LinkValue=3,INTA_IrqBitMap=def8 INTB_LinkValue=4,INTB_IrqBitMap=def8 INTC_LinkValue=1,INTC_IrqBitMap=def8 INTD_LinkValue=2,INTC_IrqBitMap=def8 ScanConfigureIrq: for Bus=0 ,Device=13 SlotNumber=4 INTA_LinkValue=4,INTA_IrqBitMap=def8 INTB_LinkValue=1,INTB_IrqBitMap=def8 INTC_LinkValue=2,INTC_IrqBitMap=def8 INTD_LinkValue=3,INTC_IrqBitMap=def8 InitKitlNIC: Searching for PCI Ethernet NIC (dwIrq = 0, dwIoBase = 0, dwDfltType = 0) ... CEPC Firmware Init RTC - Status Reg B - 0x02 g_dwCPUFeatures = 00808131 OEM Extra DRAM Detected @ base = xA1C00000, size=36 MB Looking for rom chain Rom chain NOT found Firmware Init Done. Error Reporting Memory Reserved, dump size = 00020000 Booting Windows CE version 5.00 for (x86) &pTOC = 802279d8, pTOC = 80fa1ce8, pTOC->ulRamFree = 8102e000, MemForPT = 00024000 Old or invalid version stamp in kernel structures - starting clean! Configuring: Primary pages: 12170, Secondary pages: 0, Filesystem pages = 6085 Booting kernel with clean memory configuration: Memory Sections: [0] : start: 81053000, extension: 00003000, length: 02f8a000 X86Init done, OEMAddressTable = 8023dc98. Windows CE KernelInit Updated eptr->e32_vsize to = 00090000 Scheduling the first thread. 0x83fdf030: KernelInit2: pCurThread=83fdf030 hCurThread=03fdf1de hCurProc=03fdf002, KernelInit = 80260db0 0x83fdf030: Updated eptr->e32_vsize to = 00005000 0x83fdf030: Updated eptr->e32_vsize to = 00022000 0x83fdf030: Updated eptr->e32_vsize to = 00007000 0x83fdf030: Updated eptr->e32_vsize to = 00018000 0x83fdf030: ERROR: E:\macallan\private\winceos\COREOS\nk\kernel\nknormal\..\kwin32.c line 777: 0x83fdf030: ConnectDebugger failed 0x83fdf030: first = 01f10000, last = 02000000, SharedDllBase = 03190000 0x83fdf030: Did not find emulation code for x86... using floating point hardware. 0x83fcd9dc: CertMod.dll not found, using old OEM Trust Model 0x83fcd9dc: FileSystem Starting - starting with clean file system 0x83fcd9dc: FS: initializing ROM/RAM file system 0x83fcd9dc: SC_CreateAPIHandle: pvData == NULL 0x83fcd9dc: FS: Registering file system ROM, index 2, flags 0x00000031 0x83fcd9dc: FS: Mount complete (ROM, index 2, flags 0x00000031) 0x83fcd9dc: OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35 0x83fcd9dc: Succeeded on CheckFile 0x83fcd9dc: RestoreFile(0xe3fb2e22) called fDelete = TRUE 0x83fcd9dc: PCIReg(key: , device: 0/0/0) 0x83fcd9dc: FS: Registering file system StoreMgr, index 3, flags 0x00000001 0x83fcd9dc: OEMIoControl: Unsupported Code 0x10100cc - device 0x0101 func 51 0x83fcd9dc: FSREG: Unable to read value "NoDefaultUser" under HKEY_LOCAL_MACHINE\init\BootVars 0x83fcd9dc: FSREG: Logging in default user. 0x83fcd9dc: FSREG: Unable to read value "DefaultUser" under HKEY_LOCAL_MACHINE\init\BootVars 0x83fcf800: OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9 0x83fcd9dc: SetCurrentUser: Logging out (nobody), logging in default 0x83fcd9dc: FS: Using default path "\profiles\" 0x83fcd9dc: BuildPath: profiles 0x83fcd9dc: BuildPath: profiles\default 0x83fcd9dc: SetCurrentUser: User hives not supported -- using same registry for all users 0x83fcd9dc: FS: Using default path "Windows\" 0x83fcd9dc: OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52 0x83fcd9dc: OEMIoControl: Unsupported Code 0x10100f8 - device 0x0101 func 62 0x83fcd9dc: FS: Using default path "Windows\" 0x83fcd9dc: FSREG: Unable to read value "DBFlags" under HKEY_LOCAL_MACHINE\init\BootVars 0x83fcd9dc: Initializing Database 0x83fcd9dc: DB:Validation: Name already exists DB_notify_events 0x83fcd9dc: DB:CeCreateDatabase failed 0x83fcd9dc: Filesystem initialized! 0x83fcd9dc: FILESYS: Waiting for kernel to be ready to launch apps 0x83fcfcb0: InitMUI: DISABLED (-2145016752) 0x83fcd9dc: FS: Creating signal event SYSTEM/DevMgrApiSetReady 0x83fcd9dc: FS: Creating signal event SYSTEM/PowerManagerReady 0x83fcd9dc: FS: Creating signal event SYSTEM/GweApiSetReady 0x83fcd9dc: FS: Creating signal event ReleaseFSD 0x83fcd9dc: FS: Creating signal event system/events/notify/APIReady 0x83fcd9dc: FS: Creating signal event SYSTEM/ShellAPIReady 0x83fcd9dc: FS: Creating signal event SYSTEM/NLedAPIsReady 0x83fcd9dc: FILESYS: Launching apps 0x83fcd9dc: FILESYS: Launching shell.exe 0x83fcd9dc: FILESYS: Launching device.exe 0x83fcfcb0: *** DLL_PROCESS_ATTACH - Current Process: 0x42, ID: 0x3fce2f2 *** 0x83fcfcb0: +InitDeviceFileSystems 0x83fcfcb0: FS: Registering file system $device, index 4, flags 0x00000001 0x83fcfcb0: FS: Registering file system $bus, index 5, flags 0x00000001 0x83fcfcb0: -InitDeviceFileSystems: status is 1 0x83fcfcb0: Ceddk!CalibrateStallCounter: Enter 0x83fcd9dc: FILESYS: SignalStarted loop = 2 0x83fcfcb0: Ceddk!CalibrateStallCounter: Could not find stall counter 0x83fcfcb0: Ceddk!BeginCalibration: min(1194) max(1326) 0x83fcfcb0: Ceddk!BeginCalibration: Elapsed is 1315 0x83fcfcb0: Ceddk!BeginCalibration: Delay is 18 0x83fcfcb0: DEVICE!DevloadInit 0x83fcfcb0: DEVICE!InitDevices: Root Key is Drivers\BuiltIn. 0x83fcfcb0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\Prefix) returned 2 0x83fcfcb0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\BusPrefix) returned 2 0x83fcfcb0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\PCCARD\Prefix) returned 2 0x83fcfcb0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\PCCARD\BusPrefix) returned 2 0x83fcfcb0: CardBus.DLL DLL_PROCESS_ATTACH 0x83fcfcb0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\Serial2\BusPrefix) returned 2 0x83fcfcb0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\Serial3\BusPrefix) returned 2 0x83fcfcb0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\NLed\BusPrefix) returned 2 0x83fcfcb0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\NDIS\BusPrefix) returned 2 0x83fcfcb0: CXPORT:dllentry ProcessAttach 0x83fcfcb0: CXPORT:+GetRegSettings 0x83fcfcb0: CXPORT:-GetRegSettings 0x83fcfcb0: CXPORT:InitBlockPool - Pool(16), limit 20000 bytes 0x83fcfcb0: CXPORT:InitBlockPool - Pool(32), limit 20000 bytes 0x83fcfcb0: CXPORT:InitBlockPool - Pool(48), limit 20000 bytes 0x83fcfcb0: CXPORT:InitBlockPool - Pool(64), limit 20000 bytes 0x83fcfcb0: CXPORT:InitBlockPool - Pool(96), limit 20000 bytes 0x83fcfcb0: CXPORT:InitBlockPool - Pool(128), limit 20000 bytes 0x83fcfcb0: CXPORT:InitBlockPool - Pool(256), limit 20000 bytes 0x83fcfcb0: CXPORT:InitBlockPool - Pool(356), limit 20000 bytes 0x83fcfcb0: CXPORT:InitBlockPool - Pool(476), limit 20000 bytes 0x83fcfcb0: CXPORT:InitBlockPool - Pool(512), limit 20000 bytes 0x83fcfcb0: CXPORT:InitBlockPool - Pool(1024), limit 20000 bytes 0x83fcfcb0: CXPORT:InitBlockPool - Pool(1600), limit 20000 bytes 0x83fcfcb0: CXPORT:InitBlockPool - Pool(2048), limit 20000 bytes 0x83fcfcb0: CXPORT:InitBlockPool - Pool(4096), limit 20000 bytes 0x83fcfcb0: CXPORT:InitBlockPool - Pool(8192), limit 20000 bytes 0x83fcfcb0: CXPORT:InitBlockPool - Pool(-1), limit 20000 bytes 0x83fcfcb0: NDIS: RebindAdaptersOnResume = 0 0x83fcfcb0: NDIS: PcmciaNeedsMapToScrap = 0 0x83fcfcb0: NDIS:: CE_DeleteBusFriendlyNames() failed deleting [HKLM\Comm\BusFriendlyNames] 0x83fcfcb0: DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Drivers\BuiltIn\AFD). Driver cannot be unloaded. 0x83fcfcb0: Can't load library ppp.dll 0x83fcfcb0: !AFD:AfdInitialize: Can't open Registry key Comm\AFD -- creating 'Stacks' entry 0x83fcfcb0: TCPIP: dllentry() 0x83fcfcb0: TCPIP.Register() 0x83fcfcb0: *** New TcpStack *** 0x83fcfcb0: +IPInit() 0x83fcfcb0: +IPGetConfig 0x83fcfcb0: -IPGetConfig: Ret: 0x1006B0 0x83fcfcb0: Dhcp: dllentry() -2081363536 0x83fcfcb0: +DhcpRegister: 0x83fcfcb0: -DhcpRegister: Ret = 36780 0x83fcfcb0: IPInit: registered w/ DHCP 0x83fcfcb0: IPInit: Unable to Load IPSEC 0x83fcfcb0: IGMPDelInclList: AddrPtr=1010e0 NumDelSources=0 DelSourceList=0 0x83fcfcb0: -IPInit [SUCCESS] 0x83fcfcb0: +TCPGetConfigInfo 0x83fcfcb0: -TCPGetConfigInfo 0x83fcfcb0: DEVICE!RegReadActivationValues RegQueryValueEx(TCPIP\IPDevice\BusPrefix) returned 2 0x83fcfcb0: +IPD_Init(802de18) 0x83fcfcb0: DEVICE!RegReadActivationValues RegQueryValueEx(TCPIP\TCPDevice\BusPrefix) returned 2 0x83fcfcb0: +TCP_Init(802de18) 0x83fcfcb0: TCPIP.About to register 0x83fcfcb0: !AFD: Unable to load library 'tcpip6.dll' 0x83fcfcb0: !AFD: Unable to load library 'irdastk.dll' 0x83fcfcb0: !AFD: Unable to load library 'btd.dll' 0x83fcfcb0: RdrMain: DLL_PROCESS_ATTACH, hInst:0x83F0EDD0 0x83fcfcb0: +RDR:Redir helper func: Ctxt:0x0, OpCode:1 0x83fcfcb0: +RDR:InitRedir 0x83fcfcb0: InitRedirConfig: 0x83fcfcb0: ClearTxtPwd: FALSE 0x83fcfcb0: ServerTimeoutMs: 10000 0x83fcfcb0: FindCacheMaxSize: 8192 0x83fcfcb0: ResourceExpiryInt: 600 0x83fcfcb0: RecvBufSize: 9000 0x83fcfcb0: RecvThreadPrio256: 251 0x83fcfcb0: RegisterFSRoot: TRUE 0x83fcfcb0: SECUR32: Loading package DLL: 'schannel.dll'. 0x83fcfcb0: SECUR32: Loading package DLL: 'ntlmssp.dll'. 0x83fcfcb0: SECUR32: Loading package DLL: 'kerberos.dll'. 0x83fcfcb0: SECUR32: Loading package DLL: 'spnego.dll'. 0x83fcfcb0: SECUR32: Package [1] loaded -- 'Microsoft Unified Security Protocol Provider' 0x83fcfcb0: SECUR32: Package [2] loaded -- 'Microsoft TLS 1.0' 0x83fcfcb0: SECUR32: Package [3] loaded -- 'Microsoft SSL 3.0' 0x83fcfcb0: SECUR32: Package [4] loaded -- 'Microsoft SSL 2.0' 0x83fcfcb0: SECUR32: Package [5] loaded -- 'NTLM' 0x83fcfcb0: SECUR32: Package [6] loaded -- 'Negotiate' 0x83fcfcb0: SECUR32: Locating package 'Negotiate' ...0x83fcfcb0: found (0x00040B20). 0x83fcfcb0: Found Kerberos package 0x83fcfcb0: +RDR:InitNetBIOS 0x83fcfcb0: NETBIOS: NB_NET_NOTIFY for callback at address 0x3994a500x83fcfcb0: Browser initialized 0x83fcfcb0: +RDR:FSAPIInit 0x83fcfcb0: FS: Registering file system Network, index 1, flags 0x00000000 0x83fcfcb0: -RDR:FSAPIInit 0x83fcfcb0: +RDR_Init 0x83fcfcb0: -RDR:InitRedir, initialization successful 0x83fcfcb0: !AFD: Unable to load library 'IPNat.dll' 0x83fcfcb0: Ws2Instl dllentry() -2081552924 0x83fcfcb0: Ws2Instl:IsStackInstalled - LoadLibrary(irdastk) failed 126 0x83fcfcb0: Ws2Instl:IsStackInstalled - LoadLibrary(btd) failed 126 0x83ede000: IPDispatchDeviceControl returned Status 103 0x83fcfcb0: Ws2Instl:IsStackInstalled - LoadLibrary(tcpip6) failed 126 0x83fcfcb0: !AFD: Unable to load library 'DhcpV6L.dll' 0x83fcfcb0: *TCPIP:ReadyToGo 0x83fcfcb0: +ARPInit() 0x83fcfcb0: -ARPInit [0] 0x83fcfcb0: !AFD: Unable to load library 'tcpip6.dll' 0x83fcfcb0: !AFD: Unable to load library 'irdastk.dll' 0x83fcfcb0: !AFD: Unable to load library 'btd.dll' 0x83fcfcb0: !AFD: Unable to GetProcAddress of ReadyToGo in 'Netbios' 0x83fcfcb0: !AFD: Unable to GetProcAddress of ReadyToGo in 'Redir' 0x83fcfcb0: !AFD: Unable to GetProcAddress of ReadyToGo in 'Dhcp' 0x83fcfcb0: !AFD: Unable to load library 'IPNat.dll' 0x83fcfcb0: !AFD: Unable to GetProcAddress of ReadyToGo in 'Ws2Instl' 0x83fcfcb0: !AFD: Unable to load library 'DhcpV6L.dll' 0x83fcfcb0: AFD: Initialization Complete 0x83fcfcb0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\PCI\Prefix) returned 2 0x83fcfcb0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\PCI\BusPrefix) returned 2 0x83fcfcb0: Warning: No Match template is found for following PCI Device 0x83fcfcb0: ------------------------------------------------------------------------------- 0x83fcfcb0: Bus/Device/Function = 0/0/0, Host / PCI Bridge 0x83fcfcb0: VendorID = 0x1078, DeviceID = 0x0001, Command = 0x0007, Status = 0x0280 0x83fcfcb0: RevisionID = 0x00, ProgIf = 0x00, SubClass = 0x00, BaseClass = 0x06 0x83fcfcb0: CacheLineSize = 0x00, LatencyTimer = 0x00, HeaderType = 0x00, BIST = 0x00 0x83fcfcb0: BaseAddresses: 0x83fcfcb0: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x83fcfcb0: CIS = 0x00000000, SubVendorID = 0x0000, SubSystemID = 0x0000 0x83fcfcb0: ROMBaseAddress = 0x00000000 0x83fcfcb0: InterruptLine = 0x00, InterruptPin = 0x00, MinGrant = 0x00, MaxLatency = 0x00 0x83fcfcb0: ------------------------------------------------------------------------------- 0x83fcfcb0: PCIBUS!PCICfgCheckBARs: WARNING: No matching registry key was found for placed device 0/0/0. 0x83fcfcb0: PCIBUS!PCICfgCheckBARs: Problems can result if the device is being used while configuring PCIbus. 0x83fcfcb0: Warning: No Match template is found for following PCI Device 0x83fcfcb0: ------------------------------------------------------------------------------- 0x83fcfcb0: Bus/Device/Function = 0/15/0, Ethernet Network Controller 0x83fcfcb0: VendorID = 0x8086, DeviceID = 0x1209, Command = 0x0117, Status = 0x0290 0x83fcfcb0: RevisionID = 0x10, ProgIf = 0x00, SubClass = 0x00, BaseClass = 0x02 0x83fcfcb0: CacheLineSize = 0x00, LatencyTimer = 0x42, HeaderType = 0x00, BIST = 0x00 0x83fcfcb0: BaseAddresses: 0x83fcfcb0: 0xFEDA0000 0x00001081 0xFEDC0000 0x00000000 0x00000000 0x00000000 0x83fcfcb0: CIS = 0x00000000, SubVendorID = 0x8086, SubSystemID = 0x000C 0x83fcfcb0: ROMBaseAddress = 0x00000000 0x83fcfcb0: InterruptLine = 0x0B, InterruptPin = 0x01, MinGrant = 0x08, MaxLatency = 0x38 0x83fcfcb0: ------------------------------------------------------------------------------- 0x83fcfcb0: PCIBUS!PCICfgCheckBARs: WARNING: No matching registry key was found for placed device 0/15/0. 0x83fcfcb0: PCIBUS!PCICfgCheckBARs: Problems can result if the device is being used while configuring PCIbus. 0x83fcfcb0: Warning: No Match template is found for following PCI Device 0x83fcfcb0: ------------------------------------------------------------------------------- 0x83fcfcb0: Bus/Device/Function = 0/16/0, Ethernet Network Controller 0x83fcfcb0: VendorID = 0x8086, DeviceID = 0x1209, Command = 0x0117, Status = 0x0290 0x83fcfcb0: RevisionID = 0x10, ProgIf = 0x00, SubClass = 0x00, BaseClass = 0x02 0x83fcfcb0: CacheLineSize = 0x00, LatencyTimer = 0x42, HeaderType = 0x00, BIST = 0x00 0x83fcfcb0: BaseAddresses: 0x83fcfcb0: 0xFEDA1000 0x000010C1 0xFEDE0000 0x00000000 0x00000000 0x00000000 0x83fcfcb0: CIS = 0x00000000, SubVendorID = 0x8086, SubSystemID = 0x000C 0x83fcfcb0: ROMBaseAddress = 0x00000000 0x83fcfcb0: InterruptLine = 0x0A, InterruptPin = 0x01, MinGrant = 0x08, MaxLatency = 0x38 0x83fcfcb0: ------------------------------------------------------------------------------- 0x83fcfcb0: PCIBUS!PCICfgCheckBARs: WARNING: No matching registry key was found for placed device 0/16/0. 0x83fcfcb0: PCIBUS!PCICfgCheckBARs: Problems can result if the device is being used while configuring PCIbus. 0x83fcfcb0: Warning: No Match template is found for following PCI Device 0x83fcfcb0: ------------------------------------------------------------------------------- 0x83fcfcb0: Bus/Device/Function = 0/18/0, PCI / ISA Bridge 0x83fcfcb0: VendorID = 0x1078, DeviceID = 0x0100, Command = 0x000F, Status = 0x0280 0x83fcfcb0: RevisionID = 0x30, ProgIf = 0x00, SubClass = 0x01, BaseClass = 0x06 0x83fcfcb0: CacheLineSize = 0x00, LatencyTimer = 0x00, HeaderType = 0x80, BIST = 0x00 0x83fcfcb0: BaseAddresses: 0x83fcfcb0: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x83fcfcb0: CIS = 0x00000000, SubVendorID = 0x0000, SubSystemID = 0x0000 0x83fcfcb0: ROMBaseAddress = 0x00000000 0x83fcfcb0: InterruptLine = 0x00, InterruptPin = 0x00, MinGrant = 0x00, MaxLatency = 0x00 0x83fcfcb0: ------------------------------------------------------------------------------- 0x83fcfcb0: PCIBUS!PCICfgCheckBARs: WARNING: No matching registry key was found for placed device 0/18/0. 0x83fcfcb0: PCIBUS!PCICfgCheckBARs: Problems can result if the device is being used while configuring PCIbus. 0x83fcfcb0: Warning: No Match template is found for following PCI Device 0x83fcfcb0: ------------------------------------------------------------------------------- 0x83fcfcb0: Bus/Device/Function = 0/18/1, Other Bridge 0x83fcfcb0: VendorID = 0x1078, DeviceID = 0x0101, Command = 0x0002, Status = 0x0280 0x83fcfcb0: RevisionID = 0x00, ProgIf = 0x00, SubClass = 0x80, BaseClass = 0x06 0x83fcfcb0: CacheLineSize = 0x00, LatencyTimer = 0x00, HeaderType = 0x00, BIST = 0x00 0x83fcfcb0: BaseAddresses: 0x83fcfcb0: 0x40012000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x83fcfcb0: CIS = 0x00000000, SubVendorID = 0x0000, SubSystemID = 0x0000 0x83fcfcb0: ROMBaseAddress = 0x00000000 0x83fcfcb0: InterruptLine = 0x00, InterruptPin = 0x00, MinGrant = 0x00, MaxLatency = 0x00 0x83fcfcb0: ------------------------------------------------------------------------------- 0x83fcfcb0: PCIBUS!PCICfgCheckBARs: WARNING: No matching registry key was found for placed device 0/18/1. 0x83fcfcb0: PCIBUS!PCICfgCheckBARs: Problems can result if the device is being used while configuring PCIbus. 0x83fcfcb0: ATAPI DLL_PROCESS_ATTACH 0x83fcfcb0: ATAPI:PCIConfig!DeviceConfig+(0) 0x83fcfcb0: ATAPI:PCIConfig!ConfigRsrc+(Bus 0, Device 18, Function 2) 0x83fcfcb0: ATAPI:PCIConfig!ConfigRsrc: BAR(0/18/2): Offset 0x20, Type I/O, Size 0x10 0x83fcfcb0: ATAPI:PCIConfig!ConfigRsrc- 0x83fcfcb0: Warning: No Match template is found for following PCI Device 0x83fcfcb0: ------------------------------------------------------------------------------- 0x83fcfcb0: Bus/Device/Function = 0/18/3, Audio Multimedia Device 0x83fcfcb0: VendorID = 0x1078, DeviceID = 0x0103, Command = 0x0006, Status = 0x0280 0x83fcfcb0: RevisionID = 0x00, ProgIf = 0x00, SubClass = 0x01, BaseClass = 0x04 0x83fcfcb0: CacheLineSize = 0x00, LatencyTimer = 0x00, HeaderType = 0x00, BIST = 0x00 0x83fcfcb0: BaseAddresses: 0x83fcfcb0: 0x40011000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x83fcfcb0: CIS = 0x00000000, SubVendorID = 0x1078, SubSystemID = 0x0103 0x83fcfcb0: ROMBaseAddress = 0x00000000 0x83fcfcb0: InterruptLine = 0x00, InterruptPin = 0x00, MinGrant = 0x00, MaxLatency = 0x00 0x83fcfcb0: ------------------------------------------------------------------------------- 0x83fcfcb0: PCIBUS!PCICfgCheckBARs: WARNING: No matching registry key was found for placed device 0/18/3. 0x83fcfcb0: PCIBUS!PCICfgCheckBARs: Problems can result if the device is being used while configuring PCIbus. 0x83fcfcb0: Warning: No Match template is found for following PCI Device 0x83fcfcb0: ------------------------------------------------------------------------------- 0x83fcfcb0: Bus/Device/Function = 0/18/4, VGA Compatible Display Adapter 0x83fcfcb0: VendorID = 0x1078, DeviceID = 0x0104, Command = 0x0003, Status = 0x0280 0x83fcfcb0: RevisionID = 0x00, ProgIf = 0x00, SubClass = 0x00, BaseClass = 0x03 0x83fcfcb0: CacheLineSize = 0x00, LatencyTimer = 0x00, HeaderType = 0x80, BIST = 0x00 0x83fcfcb0: BaseAddresses: 0x83fcfcb0: 0x40800000 0x40010000 0x00000000 0x00000000 0x00000000 0x00000000 0x83fcfcb0: CIS = 0x00000000, SubVendorID = 0x1078, SubSystemID = 0x584D 0x83fcfcb0: ROMBaseAddress = 0x00000000 0x83fcfcb0: InterruptLine = 0x00, InterruptPin = 0x00, MinGrant = 0x00, MaxLatency = 0x00 0x83fcfcb0: ------------------------------------------------------------------------------- 0x83fcfcb0: PCIBUS!PCICfgCheckBARs: WARNING: No matching registry key was found for placed device 0/18/4. 0x83fcfcb0: PCIBUS!PCICfgCheckBARs: Problems can result if the device is being used while configuring PCIbus. 0x83fcfcb0: ATAPI:PCIConfig!DeviceConfig+(1) 0x83fcfcb0: ATAPI DLL_PROCESS_DETACH 0x83fcf800: OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9 0x83fcfcb0: ATAPI DLL_PROCESS_ATTACH 0x83fcfcb0: ATAPI:PCIConfig!DeviceConfig+(2) 0x83fcfcb0: ATAPI:PCIConfig!ConfigSize+(Bus 0, Device 18, Function 2) 0x83fcfcb0: ATAPI:PCIConfig!ConfigSize- 0x83fcfcb0: ATAPI DLL_PROCESS_DETACH 0x83fcfcb0: ATAPI DLL_PROCESS_ATTACH 0x83fcfcb0: ATAPI:PCIConfig!DeviceConfig+(3) 0x83fcfcb0: ATAPI DLL_PROCESS_DETACH 0x83fcfcb0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\PCI\Instance\OHCI1\BusPrefix) returned 2 0x83fcfcb0: HCD driver DLL attach 0x83fcfcb0: HCD!HCD_Init 0x83fcfcb0: OHCD: Read config from registry: Base Address: 0xFEDA2000, Length: 0x1000, I/O Port: NO, SysIntr: 0x10, Interface Type: 5, Bus Number: 0 0x83fcfcb0: OHCD: ioPhysicalBase 0xFEDA2000, IoSpace 0x0 0x83fcfcb0: OHCD: ioPortBase 0x1C0000, portBase 0xFEDA2000 0x83fcfcb0: OHCD: Installed ISR handler, Dll = 'giisr.dll', Handler = 'ISRHandler', Irq = 11 0x83fcfcb0: DMA buffer passed in from PDD 0x83fcfcb0: CPhysMem Total Alloc Region PhysAddr = 0x0281F000, VirtAddr = 0x001D0000, size = 65536 0x83fcfcb0: CPhysMem Special Alloc Region PhysAddr = 0x0281F000, VirtAddr = 0x001D0000, size = 4096 0x83fcfcb0: CPhysMem HighPri Alloc Region PhysAddr = 0x02820000, VirtAddr = 0x001D1000, size = 16384 0x83fcfcb0: CPhysMem Normal Alloc Region PhysAddr = 0x02824000, VirtAddr = 0x001D5000, size = 45056 0x83fcfcb0: +COhcd::Initialize. Entry 0x83fcfcb0: +CDeviceGlobal::Initialize 0x83fcfcb0: USBD: DLL attach 0x83fcfcb0: +USBD:HcdAttach, hcd: 0x46100 0x83fcfcb0: -CDevice::Initialize, success! 0x83fcfcb0: +CHW::Initialize base=0x1c Tag: DskImage failed! Tag: 82073
  - 21
    - kitl debug hi all, I am debugging kitl with SMSC9115 Lan chip. I re-wrote the low level functions. And the chip runs very well . But when I built the kernel with kitl support, the kernel stopped and the PB could not connect with my target board . Please help me to solve this problem. Thanks a lot! zhiqiang 3 7 2006 **************Output message from serial port ******************** OEMInitDebugSerial using UART1 Windows CE Kernel for ARM (Thumb Enabled) Built on Mar 13 2003 at 22:44:13 ProcessorType=0411 Revision=7 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 96cb982c +OEMKitlInit Checking for LAN9115 Ethernet controller...++LAN9115 HardWare Setup! ChipID = 1150001!LAN9115 Ethernet controller initialized.VBridgeInit()...TX = [16384] bytes -- Rx = [16384] byteser [0xB8F09360] to [0xB8F0D360].uffer [0xB8F05340] to [0xB8F09340].Bridge:: NK add MAC: [78-2B-DE-9-4D-9A]ther IP Addr: 192.168.1.6 OEMether IP netmask: 255.255.0.0Device XSC1BD19866, IP 192.168.1.6, Port 981 Calling EdbgInitDHCP-OEMKitlInit Host connectedHost IP: 192.168.1.8, port 3962 KeyIndex 0 = -1 KeyIndex 1 = -1 KeyIndex 2 = -1 KeyIndex 3 = -1 KeyIndex 4 = -1 KeyIndex 5 = -4194305 KeyIndex 6 = -4194305 KeyIndex 7 = -1 +KITLRegisterDfltClient, service:0 +KITLRegisterDfltClient, service:1 KITLGlobalState == 0x61 KITL Initialized Waiting for service 'DBGMSG' to connect..., fUseSysCalls = 0 ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service PPSH ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service PPSH ProcessAdminMsg: Receive Config message for service DBGMSG *******************Output message form "PB Debug window"****** 0 PID:0 TID:0 XSCDBG:Trace initialized: CFG:98ef1f24 Buffer: 98ef04a8, 14f0 0 PID:0 TID:0 Booting Windows CE version 4.20 for (ARM) Tag: DskImage failed! Tag: 82071
  - 22
    - SMSC9115 Kitl debug hi all, I am debugging kitl with SMSC9115 Lan chip. I re-wrote the low level functions. And the chip runs very well . But when I built the kernel with kitl support, the kernel stopped and the PB could not connect with my target board with kitl. Please help me to solve this problem. Thanks a lot! zhiqiang 3 7 ,2006 **************Output message from serial port ******************** OEMInitDebugSerial using UART1 Windows CE Kernel for ARM (Thumb Enabled) Built on Mar 13 2003 at 22:44:13 ProcessorType=0411 Revision=7 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 96cb982c +OEMKitlInit Checking for LAN9115 Ethernet controller...++LAN9115 HardWare Setup! ChipID = 1150001!LAN9115 Ethernet controller initialized.VBridgeInit()...TX = [16384] bytes -- Rx = [16384] byteser [0xB8F09360] to [0xB8F0D360].uffer [0xB8F05340] to [0xB8F09340].Bridge:: NK add MAC: [78-2B-DE-9-4D-9A]ther IP Addr: 192.168.1.6 OEMether IP netmask: 255.255.0.0Device XSC1BD19866, IP 192.168.1.6, Port 981 Calling EdbgInitDHCP-OEMKitlInit Host connectedHost IP: 192.168.1.8, port 3962 KeyIndex 0 = -1 KeyIndex 1 = -1 KeyIndex 2 = -1 KeyIndex 3 = -1 KeyIndex 4 = -1 KeyIndex 5 = -4194305 KeyIndex 6 = -4194305 KeyIndex 7 = -1 +KITLRegisterDfltClient, service:0 +KITLRegisterDfltClient, service:1 KITLGlobalState == 0x61 KITL Initialized Waiting for service 'DBGMSG' to connect..., fUseSysCalls = 0 ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service PPSH ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service PPSH ProcessAdminMsg: Receive Config message for service DBGMSG *******************Output message form "PB Debug window"****** 0 PID:0 TID:0 XSCDBG:Trace initialized: CFG:98ef1f24 Buffer: 98ef04a8, 14f0 0 PID:0 TID:0 Booting Windows CE version 4.20 for (ARM) Tag: DskImage failed! Tag: 82070
  - 23
    - Can't download WinCE Update Is anyone else having problems when trying to download CE updates? I've been trying to get the Oct to Dec 2005 update for WinCE 4.2 for the past 2 days, but I keep receiving the message "The download you requested is unavailable". Here's the link... "http://www.microsoft.com/downloads/details.aspx?familyid=5e793909-5219-419b-9e67-9a959c2afc07&displaylang=en". Any info would be appreciated. Tag: DskImage failed! Tag: 82069
  - 24
    - Bulk-only USB Mass storage Function driver Hi everybody. Iam trying to add support for USB Mass Storage function to existing Windows Mobile 5 Smartphones/PDAs. I've successfully made a fuction driver based on BOT.CPP, registered it, and it works right, but - for reads only. When I try to issue a write, it looks like protocol sequence got messed up ("invalid CBW signature). Maybe someone encontered similar issues and know how to fix it? Here is relevant log part: UsbMsFn!ProcessScsiRead10: starting LBA/sector = 275904, transfer length = 8 (sectors) UsbMsFn!ProcessScsiRead10: IOCTL_DISK_READ( 8fb7c76a, 482312, 275904, 8 => (8d3e390, 4096) ) passed; 4096 bytes read UsbMsFn!STORE_ExecuteCommand: -- UsbMsFn!BOT_ExecuteCB: Command : passed UsbMsFn!BOT_ExecuteCB: -- UsbMsFn!BOT_HandleCBW: request length = 4096 UsbMsFn!BOT_SetupTx: ++ UsbMsFn!BOT_SetupTx: -- UsbMsFn!BOT_HandleCBW: -- UsbMsFn!ProcessBOPipeTransfer: -- BOT DefaultTransferComplete setting event UsbMsFn!BOT_TransferThread: Transfer 1 UsbMsFn!BOT_TransferThread: 4096 bytes transferred UsbMsFn!ProcessBIPipeTransfer: ++ UsbMsFn!BOT_HandleCBW: ++ UsbMsFn!ChangeMscState: State change: data in transport -> status transport UsbMsFn!BOT_BuildCSW: ++ UsbMsFn!BOT_BuildCSW: -- UsbMsFn!BOT_SetupTx: ++ UsbMsFn!BOT_SetupTx: -- UsbMsFn!BOT_HandleCBW: -- UsbMsFn!ProcessBIPipeTransfer: -- BOT DefaultTransferComplete setting event UsbMsFn!BOT_TransferThread: Transfer 1 UsbMsFn!BOT_TransferThread: 13 bytes transferred UsbMsFn!ProcessBIPipeTransfer: ++ UsbMsFn!BOT_HandleCBW: ++ UsbMsFn!ChangeMscState: State change: status transport -> idle UsbMsFn!ReceiveCBW: ++ UsbMsFn!BOT_SetupRx: ++ UsbMsFn!BOT_SetupRx: -- UsbMsFn!ChangeMscState: State change: idle -> command transport UsbMsFn!ReceiveCBW: -- UsbMsFn!BOT_HandleCBW: -- UsbMsFn!ProcessBIPipeTransfer: -- BOT DefaultTransferComplete setting event UsbMsFn!BOT_TransferThread: Transfer 2 UsbMsFn!BOT_TransferThread: 31 bytes transferred UsbMsFn!ProcessBOPipeTransfer: ++ UsbMsFn!ProcessBOPipeTransfer: Received CBW UsbMsFn!BOT_HandleCBW: ++ UsbMsFn!BOT_HandleCBW: Length: 0x0200 Flags: 0x0 CBWLen: 0xa UsbMsFn!STORE_IsCommandSupported: ++ UsbMsFn!STORE_IsCommandSupported: command 0x2a UsbMsFn!STORE_IsCommandSupported: WRITE (10) UsbMsFn!STORE_IsCommandSupported: -- UsbMsFn!ChangeMscState: State change: command transport -> data out transport UsbMsFn!BOT_HandleCBW: request length = 512 UsbMsFn!BOT_SetupRx: ++ UsbMsFn!BOT_SetupRx: -- UsbMsFn!BOT_HandleCBW: -- UsbMsFn!ProcessBOPipeTransfer: -- BOT DefaultTransferComplete setting event UsbMsFn!BOT_TransferThread: Transfer 2 UsbMsFn!BOT_TransferThread: 512 bytes transferred UsbMsFn!ProcessBOPipeTransfer: ++ UsbMsFn!ProcessBOPipeTransfer: Received data block UsbMsFn!BOT_HandleCBW: ++ UsbMsFn!BOT_ExecuteCB: ++ UsbMsFn!STORE_ExecuteCommand: ++ UsbMsFn!STORE_IsCommandSupported: ++ UsbMsFn!STORE_IsCommandSupported: command 0x2a UsbMsFn!STORE_IsCommandSupported: WRITE (10) UsbMsFn!STORE_IsCommandSupported: -- UsbMsFn!STORE_ExecuteCommand: command 0x2a UsbMsFn!STORE_ExecuteCommand: WRITE (10) UsbMsFn!ProcessScsiWrite10: starting LBA/sector = 247, transfer length = 1 (sectors) UsbMsFn!ProcessScsiWrite10: IOCTL_DISK_WRITE passed; 512 bytes written UsbMsFn!STORE_ExecuteCommand: -- UsbMsFn!BOT_ExecuteCB: Command : passed UsbMsFn!BOT_ExecuteCB: -- UsbMsFn!ChangeMscState: State change: data out transport -> status transport UsbMsFn!BOT_BuildCSW: ++ UsbMsFn!BOT_BuildCSW: -- UsbMsFn!BOT_SetupTx: ++ UsbMsFn!BOT_SetupTx: -- UsbMsFn!BOT_HandleCBW: -- UsbMsFn!ProcessBOPipeTransfer: -- BOT DefaultTransferComplete setting event UsbMsFn!BOT_TransferThread: Transfer 1 UsbMsFn!BOT_TransferThread: 13 bytes transferred UsbMsFn!ProcessBIPipeTransfer: ++ UsbMsFn!BOT_HandleCBW: ++ UsbMsFn!ChangeMscState: State change: status transport -> idle UsbMsFn!ReceiveCBW: ++ UsbMsFn!BOT_SetupRx: ++ UsbMsFn!BOT_SetupRx: -- UsbMsFn!ChangeMscState: State change: idle -> command transport UsbMsFn!ReceiveCBW: -- UsbMsFn!BOT_HandleCBW: -- UsbMsFn!ProcessBIPipeTransfer: -- BOT DefaultTransferComplete setting event UsbMsFn!BOT_TransferThread: Transfer 2 UsbMsFn!BOT_TransferThread: 31 bytes transferred UsbMsFn!ProcessBOPipeTransfer: ++ UsbMsFn!ProcessBOPipeTransfer: Received CBW UsbMsFn!BOT_HandleCBW: ++ ERROR: .\bot.cpp line 595: UsbMsFn!BOT_HandleCBW: Invalid CBW signature UsbMsFn!ChangeMscState: State change: command transport -> wait for reset UsbMsFn!BOT_HandleCBW: -- UsbMsFn!ProcessBOPipeTransfer: -- UsbMsFn!BOT_DeviceNotify: ++ UsbMsFn!BOT_DeviceNotify: Process device msg 5 (5) UsbMsFn!BOT_HandleRequest: ++ UsbMsFn!BOT_HandleClearFeature: ++ UsbMsFn!ChangeMscState: State change: wait for reset -> status transport UsbMsFn!BOT_BuildCSW: ++ UsbMsFn!BOT_BuildCSW: -- UsbMsFn!BOT_SetupTx: ++ UsbMsFn!BOT_SetupTx: -- UsbMsFn!BOT_HandleRequest: -- UsbMsFn!BOT_DeviceNotify: -- BOT DefaultTransferComplete setting event UsbMsFn!BOT_TransferThread: Transfer 1 UsbMsFn!BOT_TransferThread: 13 bytes transferred UsbMsFn!ProcessBIPipeTransfer: ++ UsbMsFn!BOT_HandleCBW: ++ UsbMsFn!ChangeMscState: State change: status transport -> idle UsbMsFn!ReceiveCBW: ++ UsbMsFn!BOT_SetupRx: ++ BOT DefaultTransferComplete setting event UsbMsFn!BOT_SetupRx: -- UsbMsFn!ChangeMscState: State change: idle -> command transport UsbMsFn!ReceiveCBW: -- UsbMsFn!BOT_HandleCBW: -- UsbMsFn!ProcessBIPipeTransfer: -- UsbMsFn!BOT_TransferThread: Transfer 2 UsbMsFn!BOT_TransferThread: 31 bytes transferred UsbMsFn!ProcessBOPipeTransfer: ++ UsbMsFn!ProcessBOPipeTransfer: Received CBW UsbMsFn!BOT_HandleCBW: ++ ERROR: .\bot.cpp line 595: UsbMsFn!BOT_HandleCBW: Invalid CBW signature UsbMsFn!ChangeMscState: State change: command transport -> wait for reset UsbMsFn!BOT_HandleCBW: -- UsbMsFn!ProcessBOPipeTransfer: -- UsbMsFn!BOT_DeviceNotify: ++ UsbMsFn!BOT_DeviceNotify: Process device msg 1 (1) UsbMsFn!BOT_DeviceNotify: Process UFN bus event 0 (0) UsbMsFn!STORE_Close: closing store Tag: DskImage failed! Tag: 82068
  - 25
    - Detecting ActiveSync (on the device) I have a simple "C" application running on my device that needs to detect if ActiveSync is connected and active. I know the info is in the docs somewhere but all I can find is info on detection of connections from the desktop side. I need the device side info. Any help?? Tag: DskImage failed! Tag: 82064

From: "CJ" <cjwn@bj1860.net>
Subject: Disk img
Date: 2006Äê3ÔÂ10ÈÕ 17:35

When I makeimg I meet the following errors:
**** DskImage failed with code 7. See window transcript for details. ****
....
...
***** BuildPkg Errors *****
ERROR: Unable to create partition OS
Inner Exception: Not enough storage is avaiable to complete this operation.

What shall I do?

Top