Does WinCE 5.0 supports Cyrillic Font ?

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - When Copying EXE file, the default icon is shown instead of actual 1. Please copy EXE file to any place 2. The actual program ICON of this EXE file is not displayed, but instead the Default ICON(IDI_APPLICATION) is shown 3. After re-booting the device, the correct program icon is shown repeating above steps reproduces same issue after copying it to anyplace, when i rename the file, the correct icon is shown When copying in IconCach.cpp, it seems that ExtractIconEX does not get the value of the correct icon Could you please tell me what i should do to solve this issue The OS is Windows CE 6.0 Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114839
  - 2
    - Wavedev2 loading problem Hiii Using Ensonic sample i have built wavedev2 driver for my audio codec. i have Waveform Audio, Waveform Audio Renderer , Wave File Parser component from the catalog in my image.Am able to load the driver for my ARM11 target platform on wince6. At the end of the bring up am expecting WAV_Open getting invoked but it fails to do so~~~~~. Meanwhile if sample application calls createfile("WAV1:") invokes the driver call WAV_Open successfully. These are my registry settings. [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev] "Prefix"="WAV" "Dll"="osk_wavedev2.dll" "Index"=dword:1 "Order"=dword:14 "Priority256"=dword:60 "AudioDMAAreaBase"=dword:8BE7F000 "AudioDMAAreaSize"=dword:00002000 [HKEY_LOCAL_MACHINE\Audio\SoftwareMixer] "Buffers"=dword:4 Any sugestion or pointers is apreciated. Thanks in advance. -- Vikram Bangalore Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114838
  - 3
    - Flashed eboot issue on Intel pxa27x I have flashed the eboot.nbo(192.29.8.102) previously it was (192.29.8.101) using Jflash on intel PXA27X. But if i try to download the image it keeps on downloading and at one time,the downloading stops.Anyone can tell me the reason and the solution for this issue. Thanks in advance. -- Message posted via http://www.pocketpcjunkies.com Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114837
  - 4
    - Want to save data hi, i have a flash on my board.On power up it start downloading image from FLASH to RAM and then run WINCE5.0 from there.In this way each time when i power up the system it start downloading fresh image from FLASH, so i am not able to save data through my .NETCF application. so is there any way to save data through my application. -- Software Developer Johari Digital Healthcare LTD. INDIA Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114836
  - 5
    - Remote Performance Monitor - update very slow Whenever I use Remote Performance Monitor it seems that selecting the cpu % usage creates a huge lag in the display update. When monitoring other metrics, such as memory load, etc. the display refresh is very regular at ~ 1000 milliseconds. The cpu % metric is update about every 10 seconds making it barely useful. Is this a know/expected behavior? Is there something I can do to remedy this? Thank you, - eepcat Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114825
  - 6
    - My file system driver does not expose DSK1: in the Control Panel Hello, I have a "self-made" file system driver. Unfortunately, I cannot see a corresponding "DSK1:" entry in the Storage Manager Control Panel applet. I am using the following autoload registry keys: [HKEY_LOCAL_MACHINE\System\StorageManager\Autoload\MYFSD] "Flags"=dword:1000 "Dll"="myfsd.dll" "Paging"=dword:1 "Bootphase"=dword:0 "LoadFlags"= dword:1 "MountAsBootable"=dword:1 What is missing in order to see "DSK1:" in the Control Panel? Peter Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114809
  - 7
    - Embedding external DLL in NK.bin When I try to add an external DLL into the run-time image NK.bin, adding a line in project.bib like this one: MyDLL.dll (Mypath)\MyDLL.dll NK C I get this error when PB calls MakeImage: "Runtime Error! Program C:\WinCE600\public\common\oak\Bin\i386\romimage.exe, this application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information." Instead, I never get that error if I include DLLs created by PB projects. The one I want to include is created under a Windows for desktop (2k, XP), but it should be compatible (it's a tool downloaded from Internet, and it says it's CE compatible). Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114805
  - 8
    - Can I expose SD and internal NAND as separate drives on USB host? Hello all, I have a WinCE 5.0 BSP for a device on which the customer wants to access the internal NAND flash and an attached SD card simultaneously from a host PC as individual disk drives. I've added the blocks to platform.reg mentioned in the online help and various examples I've seen (reproduced below), but the two cannot be seen at the same time. I have noticed that the "DeviceName" key is described in the singular as identifying "the name of the store to expose to the USB host." Do I infer from this that it is not possible to expose more than one store in this manner? If this can be done, what would the registry keys look like? Also, can anyone provide a citation of Microsoft literature discussing this area, so that I can better explain if there exists a design limitation preventing simultaneous visibility of more than one store. Thanks, Craig Blome [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\Mass_Storage_Class] "DeviceName"=- ; erase previous default "DeviceName"="DSK1:" [HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers] "DefaultClientDriver"=- ; erase previous default ; "DefaultClientDriver"="Serial_Class" "DefaultClientDriver"="Mass_Storage_Class" Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114804
  - 9
    - Location of Frame Buffer Hi, I am working on an ICOP x86 300 Mhz based deviced with Windows CE 6.0. We generated the OS image. I would like to reach directly the VGA memory to make some fact graphic operations. VGA controller is XGI Volari Z9s. I worked with s3c2410 before, this unit has source code for the LCD and also headers for memory area that the LCD frame buffer use. How can I find the memory area for VGA for this unit? in config.bib the memory are as: DMA 80100000 00030000 RESERVED ; Native DMA reserved. BOOTARGS 801FFF00 00000100 RESERVED ; Boot arguments EDBG_DMA 80200000 00020000 RESERVED ; EDBG DMA buffer FRAMEBUF 800A0000 00020000 RESERVED in startup.asm _OEMAddressTable: dd 80000000h, 0 Any idea wellcomes. Best regards, Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114798
  - 10
    - LCD Display i have 320x240 LCD but i want to use only 300x200 display area. can any tell where i have to change in display driver. -- Software Developer Johari Digital Healthcare LTD. INDIA Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114796
  - 11
    - MMC card write error - dropping bit 7 We have a strange error with some MMC cards. OS is CE5 PXA255 MMC card formatted with FAT. With some MMC cards, currently the issue with with 1 1GB "MMCplus" card, the writes to the card do not work correctly. I have turned on FATFS_VERIFY_WRITES but still the problem persists. I would have hoped this would have ensured the writes occur correctly? It is only ever a byte or two within a file and it is always the top bit (bit 7) which is dropped from 1 to 0. (e.g it should be C5 but is actually 45). It is not always the same byte in the file, not always the same file (for example when extracting a CAB file different files get corrupted on different attempts) This happens for files written by CE5 on the device. If I remove the MMC card and read it in a card reader on a PC it shows the missing bit(s) in the file(s). If I write to the card using the card reader the write is successful I have tried reducing the maximum MMC clock speed from 10MHz to 5MHz but still the same effect. Any other ideas? Any ideas how we can figure out why its failing? Thanks Andrew Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114788
  - 12
    - Program memory usage in Windows CE 5.0 Hi there, I have a question on Program memory usage in Windows CE 5.0. When I copy a file from one location to another on the device I see incerase in program memory usage. (For example from MyDocuments to Desktop). But if I delete the same file from desktop and recycle bin, I don't get back the memory allotted during the copy. Is this memory leak in Windows CE 5.0 filesystem? If not why Windows CE behaves like this? Who uses that memory? How to avoid this happening? Any inputs will be helpful! Thanks Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114787
  - 13
    - How to change USB function driver endpoint address ? Hi I tried to modify USB Serial function driver PDD usbfndrv.cpp #define USB_VERSION 0x220 -----> 0x110 #define BULK_IN_ENDPOINT_ADDRESS 0x81 ----> 0x84 #define BULK_OUT_ENDPOINT_ADDRESS 0x02 ----> 0x04 Then I use USBView to see new description, but only VERSION info change . How can I change the endpoints for Bulk mode in and out ? Thank you . Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114786
  - 14
    - Windows CE 5.0 Internet Explorer We currently build Internet explorer 6.0 into our Wince500 OS, selecting view->option allows me to set various options in the following Tabs, General, Connection, Security, Privacy, Popups, for some bizarre reason I cannot check/uncheck the boxes in the advanced TAB. These are options such as Disable automatic sip, enable stylesheets, play sounds in web pages, security->use ssl 2.x, 3.x etc. Regards Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114785
  - 15
    - C# DeviceApplication how to add Windows Media Player component? Hi all, I'm using VS 2005 and target device (OS Design : Custom Design)Windows CE 6.0 I'm new create a project VS 2005 >> C# >> Smart Device >> Windows CE 5.0 >>Device Application template. Toolbox rigt click > Choose items > Com components > WMP wmp.dll add I cannot see media player controls in the toolbox...However if I choose C# > Windows > Windows application template i can see the control and use it. Thank You... Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114780
  - 16
    - does R2 FLASH MDD/PDD supports MBR? As the doc says, MDD/PDD won't support MBR, is it right? If so, how can I create multi partitions in bootloader? In FAL/FMD, I use bootloader to create MBR to support BINFS & FATFS on one NAND chip, if MBR doesn't work, could you give me a way to implement this? thanks Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114777
  - 17
    - Unresolve externals while building OAL. Hello, I m implenting RTC logic for Davinci(Dm6446).... for RTC logic communicates with davinci via I2C protocol... So in RTC logic sources file i have included I2C lib. and in OAL i have link RTC.lib...... but while building OAL i m facing with unresolved external sumbols--> closehandle,getlasterror,WaitForSingleObject,ReleaseMutex and like some others which are declared inside i2C.lib which are declared inside I2C code... but OAL layer does not support the above functions...thats why getting that errors... So do u have any idea ???how to resolve this OAL level issues??? Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114776
  - 18
    - How to get LAN icon in Intel PXA27X using Windows CE 5.0 Platform I am working with Intel PXA27X using Windows CE 5.0. What should i do to get LAN icon in the (Network and Dialup Connection in the board). Thanks in advance.. Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114773
  - 19
    - I am not getting lan icon in Intel PXA27X board using windows CE 5.0 I am working with Intel PXA27X MainstoneII board on Windows CE 5.0. I have added catalog icons NE-2000 compatible (PCMCIA) to OS design but still i am not getting LAN icon in (Network and Dialup Connections in the board..Tell me what i need to do to get LAN icon in the board..Thanks in advance Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114771
  - 20
    - damenkleidung kaufen fuer islamische damenbekleidung bestellen damenkleidung kaufen grosse groessen damenkleidung kaufen in grossen damenkleidung kaufen uebergroessen damenkleidung kaufen fuer islamische damenbekleidung bestellen damenkleidung kaufen grosse groessen damenkleidung kaufen in grossen damenkleidung kaufen uebergroessen + + + +++ DAMENKLEIDUNG KAUFEN +++ DAMENKLEIDUNG ONLINE BESTELLEN +++ + http://WWW.DAMENKLEIDUNG-KAUFEN-24.INFO http://WWW.DAMENKLEIDUNG-KAUFEN-24.INFO http://WWW.DAMENKLEIDUNG-KAUFEN-24.INFO http://WWW.DAMENKLEIDUNG-KAUFEN-24.INFO http://WWW.DAMENKLEIDUNG-KAUFEN-24.INFO http://WWW.DAMENKLEIDUNG-KAUFEN-24.INFO http://WWW.DAMENKLEIDUNG-KAUFEN-24.INFO + + + +++ DAMENKLEIDUNG KAUFEN +++ DAMENKLEIDUNG ONLINE BESTELLEN +++ + http://WWW.MAENNERKLEIDUNG-KAUFEN-24.INFO http://WWW.MAENNERKLEIDUNG-KAUFEN-24.INFO http://WWW.MAENNERKLEIDUNG-KAUFEN-24.INFO http://WWW.MAENNERKLEIDUNG-KAUFEN-24.INFO http://WWW.MAENNERKLEIDUNG-KAUFEN-24.INFO http://WWW.MAENNERKLEIDUNG-KAUFEN-24.INFO http://WWW.MAENNERKLEIDUNG-KAUFEN-24.INFO + + + + +++ UEBERGROESSEN KAUFEN +++ UEBERGROESSEN ONLINE BESTELLEN +++ + http://WWW.UEBERGROESSEN-KAUFEN-24.INFO http://WWW.UEBERGROESSEN-KAUFEN-24.INFO http://WWW.UEBERGROESSEN-KAUFEN-24.INFO http://WWW.UEBERGROESSEN-KAUFEN-24.INFO http://WWW.UEBERGROESSEN-KAUFEN-24.INFO http://WWW.UEBERGROESSEN-KAUFEN-24.INFO + + + http://www.gamesforum.ca/showthread.php?t=316022 http://www.geschirr-online.info/ - Geschirr Online Bestellen http://groups.google.de/group/hdmi-cable/browse_thread/thread/7765af3b2e0c5639# zero damenbekleidung bestellen grosshandel damenbekleidung bestellen designer damenbekleidung bestellen damenbekleidung bestellen gr 46 damenbekleidung bestellen duesseldorf only damenbekleidung bestellen damen jacke bestellen opus damenbekleidung bestellen damenbekleidung bestellen duesseldorf damen kleidung in bestellen la martina damenbekleidung bestellen second hand damenkleidung kaufen damenkleidung kaufen tragen damenbekleidung bestellen xxl damenmode bestellen www damenbekleidung bestellen damenbekleidung bestellen onlineshop hirsch damenkleidung kaufen damen bekleidung bestellen damenbekleidung bestellen in berlin damenbekleidung bestellen in uebergroessen damenkleidung kaufen fuer maenner damen kleidung bestellen indische damenbekleidung bestellen kataloge damenbekleidung bestellen damen jacken bestellen damenbekleidung bestellen guenstige damenkleidung kaufen adidas damenbekleidung bestellen oilily damenbekleidung bestellen mode damenbekleidung bestellen damenkleidung kaufen guenstig damen pullover bestellen adidas damenbekleidung bestellen mango damenbekleidung bestellen groessentabelle damenbekleidung bestellen Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114769
  - 21
    - PM PDD Choise? Hi I want to know have any principles need to take care for PM PDD choising ? Thinks Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114767
  - 22
    - PB5 emulator ARMV4 vs ARMV4i (2577 vs 2336) I'm trying to create a generic emulator image for testing some applications against a CE device that has the standard shell. I've installed the device emulator BSP and successfully followed the directions to create an image and SDK. The SDK/emulator installs and runs just fine, but I'm running into a CPU ID issue with installing CABs and running applications. On real devices I've tested against, when the OS reports the CPU as a 2336, I can still run binaries that were compiled for ARMV4, but not so on the emulator I've generated. Can someone tell me how to configure the platform I'm creating so that it either reports a CPU ID of 2577, or acts like the devices I've seen where ARMV4 binaries still run? environment: XP SP3 PB 5 The december 07 ARMV4i product update rollup device emulator BSP for Windows CE 5.0 Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114765
  - 23
    - Hive Registry and TIPC card problem Hello all, On Wince 5.0 new hardware/new product, I was originally doing my debugging with a ram registry. We have a Ricoh chip that is a CF and SD (+ others) device. The CF mimics the TIPCCARD driver. when I have my ram registry I include the TI PCCARD driver ( also have the BLOCK ATAPI driver and the Compact Flash /PC Card Storage drivers) My "Hard Drive" is a PCI/IDE PCI 0/15/2 and the CF device is PCI 0/13/0 (info for the traces below) If I have the ram registry the system boots just fine and my CF slot works without any problem. As Soon as I changed to the Hive my system wont completely boot. If I remove the TIPC Card driver it will boot (but no cf.:( One thing I found when running the ram registry is that when the cf card is inserted giisr gets used in atapipcmcia.cpp and it has Info.CheckPort = FALSE; so it assumes it's the last device in the giisr chain , well that worked if the cf card was inserted after I booted but if the card was already in on a boot this prevented other device from getting services. I changed the order on that driver to 10 and that fixed that problem, but again that was using a ram registry, I have too much debug info so I've just cut and pasted a bit below (hopefully enough). one set from the Ram registry boot and some from the Hive Registry boot (look for ========== demark) any help, thoughts, suggestions ? RAM Registry.... ===================================== 4294770130 0x83fcd8e4: >>> Loading module atapi.dll at address 0x03CC0000-0x03CE6000 (RW data at 0x01FD5000-0x01FD5608) Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DSV3JULY09\RELDIR\DSV3GEODELX_X86_DEBUG\ATAPI.DLL' 4294770147 0x83fcd8e4: ATAPI DLL_PROCESS_ATTACH 4294770147 0x83fcd8e4: ATAPI:PCIConfig!DeviceConfig+(0) 4294770147 0x83fcd8e4: ATAPI:PCIConfig!ConfigRsrc+(Bus 0, Device 15, Function 2) 4294770148 0x83fcd8e4: ATAPI:PCIConfig!ConfigRsrc: BAR(0/15/2): Offset 0x20, Type I/O, Size 0x10 4294770148 0x83fcd8e4: ATAPI:PCIConfig!ConfigRsrc- 4294770165 0x83fcd8e4: PCMCIA!DeviceConfig+(1) 4294770165 0x83fcd8e4: CardBus!ConfigSet: BAR(0/13/0): Offset 0xfffffffe, Type IO,Base 0xA000 Size 0x400 4294770165 0x83fcd8e4: ATAPI:PCIConfig!DeviceConfig+(1) 4294770165 0x83fcd8e4: ATAPI DLL_PROCESS_DETACH 4294770165 0x83fcd8e4: <<< Unloading module atapi.dll at address 0x03CC0000-0x03CE6000 (RW data at 0x01FD5000-0x01FD5608) Unloaded symbols for 'C:\WINCE500\PBWORKSPACES\DSV3JULY09\RELDIR\DSV3GEODELX_X86_DEBUG\ATAPI.DLL' 4294770173 0x83fcd8e4: TI : DLL_PROCESS_DETACH 4294770173 0x83fcd8e4: <<< Unloading module pcc_tipccard.dll at address 0x01340000-0x01353000 Unloaded symbols for 'C:\WINCE500\PBWORKSPACES\DSV3JULY09\RELDIR\DSV3GEODELX_X86_DEBUG\PCC_TIPCCARD.DLL' 4294770201 0x83fcd8e4: >>> Loading module pcc_tipccard.dll at address 0x01340000-0x01353000 Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DSV3JULY09\RELDIR\DSV3GEODELX_X86_DEBUG\PCC_TIPCCARD.DLL' 4294770219 0x83fcd8e4: TI : DLL_PROCESS_ATTACH 4294770220 0x83fcd8e4: PCMCIA!DeviceConfig+(2) 4294770220 0x83fcd8e4: TI : DLL_PROCESS_DETACH 4294770220 0x83fcd8e4: <<< Unloading module pcc_tipccard.dll at address 0x01340000-0x01353000 Unloaded symbols for 'C:\WINCE500\PBWORKSPACES\DSV3JULY09\RELDIR\DSV3GEODELX_X86_DEBUG\PCC_TIPCCARD.DLL' 4294770228 0x83fcd8e4: >>> Loading module pcc_tipccard.dll at address 0x01340000-0x01353000 Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DSV3JULY09\RELDIR\DSV3GEODELX_X86_DEBUG\PCC_TIPCCARD.DLL' 4294770248 0x83fcd8e4: TI : DLL_PROCESS_ATTACH 4294770248 0x83fcd8e4: PCMCIA!DeviceConfig+(3) 4294770248 0x83fcd8e4: TI : DLL_PROCESS_DETACH 4294770249 0x83fcd8e4: <<< Unloading module pcc_tipccard.dll at address 0x01340000-0x01353000 Unloaded symbols for 'C:\WINCE500\PBWORKSPACES\DSV3JULY09\RELDIR\DSV3GEODELX_X86_DEBUG\PCC_TIPCCARD.DLL' 4294770283 0x83fcd8e4: >>> Loading module atapi.dll at address 0x03CC0000-0x03CE6000 (RW data at 0x01FD5000-0x01FD5608) Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DSV3JULY09\RELDIR\DSV3GEODELX_X86_DEBUG\ATAPI.DLL' 4294770301 0x83fcd8e4: ATAPI DLL_PROCESS_ATTACH 4294770301 0x83fcd8e4: ATAPI:PCIConfig!DeviceConfig+(2) 4294770301 0x83fcd8e4: ATAPI:PCIConfig!ConfigSize+(Bus 0, Device 15, Function 2) 4294770302 0x83fcd8e4: ATAPI:PCIConfig!ConfigSize- 4294770302 0x83fcd8e4: ATAPI DLL_PROCESS_DETACH 4294770302 0x83fcd8e4: <<< Unloading module atapi.dll at address 0x03CC0000-0x03CE6000 (RW data at 0x01FD5000-0x01FD5608) Unloaded symbols for 'C:\WINCE500\PBWORKSPACES\DSV3JULY09\RELDIR\DSV3GEODELX_X86_DEBUG\ATAPI.DLL' 4294770312 0x83fcd8e4: >>> Loading module atapi.dll at address 0x03CC0000-0x03CE6000 (RW data at 0x01FD5000-0x01FD5608) Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DSV3JULY09\RELDIR\DSV3GEODELX_X86_DEBUG\ATAPI.DLL' 4294770329 0x83fcd8e4: ATAPI DLL_PROCESS_ATTACH 4294770329 0x83fcd8e4: ATAPI:PCIConfig!DeviceConfig+(3) 4294770329 0x83fcd8e4: ATAPI DLL_PROCESS_DETACH 4294770330 0x83fcd8e4: <<< Unloading module atapi.dll at address 0x03CC0000-0x03CE6000 (RW data at 0x01FD5000-0x01FD5608) Unloaded symbols for 'C:\WINCE500\PBWORKSPACES\DSV3JULY09\RELDIR\DSV3GEODELX_X86_DEBUG\ATAPI.DLL' 4294770665 0x83fcd8e4: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\PCI\Instance\WaveDev1\BusPrefix) returned 2 4294770667 0x83fcd8e4: >>> Loading module wmwavedev.dll at address 0x011E0000-0x01207000 Loaded symbols for 'C:\WINCE500\PBWORKSPACES\DSV3JULY09\RELDIR\DSV3GEODELX_X86_DEBUG\WMWAVEDEV.DLL' ================================================== Hive Registry \RELDIR\DSV3GEODELX_X86_DEBUG\PCC_TIPCCARD.DLL' 4294775836 0x83f960d8: TI : DLL_PROCESS_ATTACH 4294775836 0x83f960d8: PCMCIA!DeviceConfig+(0) 4294775837 0x83f960d8: PCMCIA!ConfigRsrc+(Bus 0, Device 13, Function 0) 4294775837 0x83f960d8: PCMCIA!ConfigRsrc: BAR(0/13/0): Offset 0x10, Type Memory, Size 0x1000 4294775837 0x83f960d8: PCMCIA!ConfigRsrc: BAR(0/13/0): Offset 0xffffffff, Type Memory , Size 0x400000 4294775837 0x83f960d8: PCMCIA!ConfigRsrc: BAR(0/13/0): Offset 0xfffffffe, Type IO, Size 0x400 4294775837 0x83f960d8: PCMCIA!ConfigRsrc- 4294775857 0x83f960d8: ATAPI:PCIConfig!DeviceConfig+(0) 4294775857 0x83f960d8: ATAPI:PCIConfig!ConfigRsrc+(Bus 0, Device 15, Function 2) 4294775858 0x83f960d8: ATAPI:PCIConfig!ConfigRsrc: BAR(0/15/2): Offset 0x20, Type I/O, Size 0x10 4294775858 0x83f960d8: ATAPI:PCIConfig!ConfigRsrc- 4294775868 0x83f960d8: PCMCIA!DeviceConfig+(1) 4294775868 0x83f960d8: CardBus!ConfigSet: BAR(0/13/0): Offset 0xffffffff, Type IO,Base 0x80000000 Size 0x400000 4294775869 0x83f960d8: PCMCIA!DeviceConfig+(1) 4294775870 0x83f898a8: [NOTIFY] HandleSystemEvent 7 /ADD SDC1: 4294775874 0x83f960d8: ATAPI:PCIConfig!DeviceConfig+(1) 4294775874 0x83f960d8: TI : DLL_PROCESS_DETACH 4294775874 0x83f960d8: <<< Unloading module pcc_tipccard.dll at address 0x02270000-0x02283000 (RW data at 0x01EA7000-0x01EA777C) Unloaded symbols for 'C:\WINCE500\PBWORKSPACES\DSV3CMAY28\RELDIR\DSV3GEODELX_X86_DEBUG\PCC_TIPCCARD.DLL' 4294775894 0x83f960d8: Atapi!CDisk::PerformIoctl> IOCTL(2), device(0) 4294775894 0x83f960d8: Atapi!CPCIDiskAndCD::MainIoctl> IOCTL(0x2), device(0) 4294775894 0x83f960d8: Atapi!CPCIDisk::MainIoctl> IOCTL(2), device(0) 4294775894 0x83f960d8: Atapi!CDisk::MainIoctl> IOCTL(2), device(0) 4294775895 0x83f960d8: Atapi!ReadWriteDiskDMA> sr_start(338187), sr_num_sec(8), sr_num_sg(1) 4294775895 0x83f960d8: Atapi!CPCIDisk::SetupDMA> Request(Read), SgCount(1) 4294775895 0x83f960d8: Atapi!CDisk::SendIOCommand> sector(338187), sectors left(8), command(c8) 4294776481 0x83de7920: VMini:: Detected DHCP [DISCOVER] 4294778463 0x83de7920: VMini:: Detected DHCP [DISCOVER] 4294782855 0x83de7920: VMini:: Detected DHCP [DISCOVER] 4294790856 0x83de7920: GetDhcpLease(VMINI1): failed badly! 4294795896 0x83f960d8: Atapi!CDisk::ReadWriteDiskDMA> Failed to wait for interrupt; device(0) 4294795902 0x83f960d8: Atapi!CDisk::ResetController> Device is ready 4294795902 0x83f960d8: Read/Write Sector failed (30) on Sector 338155 4294795902 0x83f960d8: FATFS!FAT_ReadFileWithSeek(0x1315a0) returned 0x0 (30, 0x3f96287 bytes, size 0x20000) 4294796153 0x83f960d8: Atapi!CDisk::PerformIoctl> IOCTL(2), device(0) 4294796153 0x83f960d8: Atapi!CPCIDiskAndCD::MainIoctl> IOCTL(0x2), device(0) 4294796153 0x83f960d8: Atapi!CPCIDisk::MainIoctl> IOCTL(2), device(0) 4294796153 0x83f960d8: Atapi!CDisk::MainIoctl> IOCTL(2), device(0) 4294796153 0x83f960d8: Atapi!ReadWriteDiskDMA> sr_start(338187), sr_num_sec(8), sr_num_sg(1) 4294796155 0x83f960d8: Atapi!CPCIDisk::SetupDMA> Request(Read), SgCount(1) 4294796155 0x83f960d8: Atapi!CDisk::SendIOCommand> sector(338187), sectors left(8), command(c8) 4294816157 0x83f960d8: Atapi!CDisk::ReadWriteDiskDMA> Failed to wait for interrupt; device(0) 4294816163 0x83f960d8: Atapi!CDisk::ResetController> Device is busy; 3 seconds remaining 4294817164 0x83f960d8: Atapi!CDisk::ResetController> Device is busy; 2 seconds remaining 4294818165 0x83f960d8: Atapi!CDisk::ResetController> Device is busy; 1 seconds remaining 4294819166 0x83f960d8: Atapi!CDisk::ResetController> Timeout 4294819166 0x83f960d8: Read/Write Sector failed (30) on Sector 338155 4294819166 0x83f960d8: FATFS!FAT_ReadFileWithSeek(0x1315a0) returned 0x0 (30, 0x3f96287 bytes, size 0x20000) 4294819418 0x83f960d8: Atapi!CDisk::PerformIoctl> IOCTL(2), device(0) 4294819418 0x83f960d8: Atapi!CPCIDiskAndCD::MainIoctl> IOCTL(0x2), device(0) 4294819418 0x83f960d8: Atapi!CPCIDisk::MainIoctl> IOCTL(2), device(0) 4294819418 0x83f960d8: Atapi!CDisk::MainIoctl> IOCTL(2), device(0) 4294819418 0x83f960d8: Atapi!ReadWriteDiskDMA> sr_start(338187), sr_num_sec(8), sr_num_sg(1) 4294819419 0x83f960d8: Atapi!CPCIDisk::SetupDMA> Request(Read), SgCount(1) 4294819420 0x83f960d8: Atapi!CDisk::SendIOCommand> sector(338187), sectors left(8), command(c8) 4294819444 0x83f960d8: Atapi!CDisk::SendIOCommand> Failed to send command; status(80), error(80) 4294819450 0x83f960d8: Atapi!CDisk::ResetController> Device is busy; 3 seconds remaining 4294820451 0x83f960d8: Atapi!CDisk::ResetController> Device is busy; 2 seconds remaining 4294821452 0x83f960d8: Atapi!CDisk::ResetController> Device is busy; 1 seconds remaining 4294822453 0x83f960d8: Atapi!CDisk::ResetController> Timeout 4294822453 0x83f960d8: Read/Write Sector failed (30) on Sector 338155 4294822453 0x83f960d8: FATFS!FAT_ReadFileWithSeek(0x1315a0) returned 0x0 (30, 0x3f96287 bytes, size 0x20000) Thanks Joe W. Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114757
  - 24
    - xr16c864 Quad uart and shared interrupts Hello! I have a geode system which uses a XR16C864 quad uart chip (connected on the ISA bus). This chip has 4 interruptlines going to a CPLD, where they are OR'ed, and connected to the CPU IRQ10 line. So, in other words i need to share IRQ10. This system used to run Windows CE .net, and someone has written a working driver and ISR, but when using this on Windows CE5 (which i need to), it does not work. The old ISR was actually just GIISR.DLL, which was called for each uart like this KernelLibIoControl(pHWHead->hIsrHandler, IOCTL_GIISR_INFO, &Info, sizeof(Info), NULL, 0, NULL) where the GIISR_INFO struct is: Info.SysIntr = pHWHead->dwSysIntr; Info.CheckPort = TRUE; Info.PortIsIO = TRUE; Info.UseMaskReg = FALSE; Info.PortAddr = (DWORD)pHWHead->pIIR_FCR; //ISR when read Info.PortSize = sizeof(BYTE); Info.Mask = SERIAL_IIR_INT_SOURCE_MASK; And, when the IST event is triggered, the ISR is read like this KernelLibIoControl(pHWHead->hIsrHandler, IOCTL_GIISR_PORTVALUE, NULL, 0, &(pHWHead->IIR), sizeof(BYTE), NULL) This returns the ISR of the correct uart, and the processing begins. My problem is: At some point beween CE4 and 5, MS decided to change the structure of the COM16550 driver completely (from C to C++ and more layered). I have created a new COM16864 driver based on this new COM16550, i have also used the new GIISR,. This works great as long as i only use one port at a time BUT, when sending data to two ports at a time, the interrups goes high(as seen on oscilliscope on com10), and it is not cleared until the port is closed again. I think this is because one of the UART receive FIFOs goes above the trigger level, which will cause an interrupt, but for some reason the interrupt is not registered in the driver, and therefore the FIFO will not be emptied, and the interrupt stays high. I have read alot about the GIISR not being suitable for serial IRQ sharing, or that the GIISR_INFO checkport value will cause unpredicable behaviour when used with IRQ sharing, but my problem is: THIS WORKED ON THE OLD SYSTEM! What happens when GIISR finds a valid value in the chain of ISRs? Will it ever look further down the chain for another valid intterupt? If anyone have any ideas or suggestions, please help! Regards, LT Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114755
  - 25
    - Jan QFE? I did an "update check" with my VS2005 and it shows Janurary QFE for CE 6 is missing. I do not even see this one listed on the download site. Whats up? Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114750
- Next
  - 1
    - Locating unreleased interfaces in a COM application Hi all, I have a C application running on WinCE 6.0 that is using a COM component (RTC v1.5, to be specific). There seem to be some memory leaks, but I have not been able to locate them. All of them seem to have something to do with unreleased interfaces. I've run the rest of the code through AppVerifier to ensure there are no leaks. I've used IMallocSpy too but it doesn't help me locate the interfaces I'm missing out on. Is there any tool or any other method that I can use to find unreleased interfaces, or narrow down on the leaks a bit? Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114746
  - 2
    - application verifier on CE6.0 hi We have a kernel mode storage driver written for WinCE6.0.I am trying to run application verifier tool to test the driver for memory leaks in CE6.0 .Please find the procedure that i am following for the same 1,I copy the required binaries as specified by getappverif_cetk to my release folder 2,I set the environment variables i.set IMGSHIMENABLE=1 ii.set VERIFY_MODULES= my_driver.dll nk.exe tux.exe iii.set VERIFY_SHIMS=shim_heap.dll shim_hleak.dll iv.set VERIFY_OPTIONS= NoMapFiles EnableFanOut IgnoreNullFree 3,Then i run makeverifyfile.bat to get the verify.txt file 4,I attach to the target and execute the following commands for heap verification i,loadext shim_heap.dll ii,heapverif * chk iii,I run a cetk test case which exercises my driver iv,I run heapverif * delta to get the logs my question is : a,do i have to specify nk.exe or tux.exe in VERIFY_MODULES?If i dont specify these .exe and try to establish a check point it says process not shimmed and no check point gets created. b,Even after specifying to shim nk.exe process whenever i introduce a memory leak in the driver and exercise my driver the logs do not show any memory leak. c,I view the logs using avlogview.exe however my driver .dll is not listed anywhere.How does the log report show the memory leak in our driver.Does it give the driver.dll name in the logs? d,Is it necessary to shim tux.exe or nk.exe to detect the memory leak in our driver? I would really appreciate it if someone could clarify my doubts... Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114745
  - 3
    - One or more Visual Studio templates do not match any installed pro I am not able to create CE6.0 project with running VS 2005 Professsional edition on a Windows XP SP2 machine which also has VS 2005, VS80sp1-KB926601-X86-ENU, CE6.0, Windows Embedded CE 6.0 Platform Builder Service Pack 1 installed on it. In event log I see following errors (most related): One or more Visual Studio templates do not match any installed project packages. Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114744
  - 4
    - Dynamically partitoning flash memory from Bootloader. hi , We are using WinCE 6.0 on PXA320 processor.I need to dynamically resize the storage space using FMD driver based on the image size. That is, instead of keeping the FMD size constant, it should be varied accoring to the size of the OS image. For an example if the total flash size 512MB and if the size of the OS image is 20MB then the rest 492MB should be utilized for storage and if I change the size of the OS image to 30MB then the storage memory should be 482MB, so that no flash memory is wasted. The size of the image will be given by the user at bootloader.Can anybody help me in this and we are using a NAND flash. Thanks in advance. Regards Joseph Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114742
  - 5
    - Unable to Download my OS image built for RAM Hi, Am working on WinCE 6.0. I have built an OS image for FLASH and burnt it in the flash. Now, in order to debug and update my application( sub-project), i have made the os image for RAM and when i attach it to the target (to download), it is successfully downloaded into the RAM. But when i run my application, what i came to know is, the one that is in Flash is running but not my RAM image. What should i do? Are there any settings that i need to change for my RAM image to work insted Flash image? Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114738
  - 6
    - Unable to stop at break point in my application Am debugging my application using wince 6. Am using iMX31 Freescale board as my devide. I have build the OS image for RAM (for Release version) using iMX31 BSP. But after i port my OS onto the board, am able to run my application and it is giving proper results but am unble to debug it step by step. Even if i put some break points in the application, after i run the application, the yellow circles which represent break points before running the application turns into RED circles ....... I have debugged many applications before and am successful in debugging them but this current application is not stopping at the break points ... It simply completes the execution and shows the result..... Any suggestions...... Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114737
  - 7
    - Compactor::CompactDataBlock() - Warning, cached dirty sector count inconsistent for block 0x000003bc Hi mates, I posted the problem described below one week ago with no answer... so I rewrite it here again in case somebody can help. Does any body know if the source code that produce these warnings is available? It'd help to understand the root of the problem. The exactly messages I got are: Compactor::CompactDataBlock() - Warning, cached dirty sector count inconsistent for block 0x000003bc Compactor::CompactDataBlock() - Warning, cached dirty sector count inconsistent for block 0x000001ef Compactor::CompactDataBlock() - Warning, cached dirty sector count inconsistent for block 0x000000ee Compactor::CompactDataBlock() - Warning, cached dirty sector count inconsistent for block 0x000003ce Compactor::CompactDataBlock() - Warning, cached dirty sector count inconsistent for block 0x00000320 Compactor::CompactDataBlock() - Warning, cached dirty sector count inconsistent for block 0x00000342 Compactor::CompactDataBlock() - Warning, cached dirty sector count inconsistent for block 0x000002d6 .... Sometimes: SectorManager::RemoveDirtySectors: Error, Invalid dirty sector count for block 0xba. They appear when I fill the filesystem (extFat on a nand flash) over 95% of the capacity. See more details below or feel free to ask :) ---------------------- Previous Post: -------------- Hi mates, I have a WinCE6.0 based device with a FMD driver to get access to a NAND flash and a filesystem on top of it (extFAT). Before installing RC2 it seemed to work fine. After installing RC2, we were very interested in the new MDD layer with Wear leveling features so we did a couple of changes in the registry and the driver to make use of it through a kind of wrapper (not doing a complete new flash driver): - driver: links to fmdwrapperpdd.lib instead of fal.lib changed dll name from smflash.dll to nandfmd.dll *.def file changed - registry: "PartitionDriver" from mspart.dll to flashpart.dll [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\NANDFLASH] old: "Dll"="smflash.dll" new: "Dll"="flashmdd.dll" "FlashPddDll"="nandfmd.dll" The change worked fine and I had again a filesystem available when WinCE boots. The only difference (from the user point of view) I could detect is that now ControlPannel\StorageManager reports the total size of the flash instead of the real size I leave for the filesystem (I protect some areas of the flash by returning BLOCK_STATUS_BAD in FMD_GetBlockStatus) But after doing some tests, I've found a totally reproducable problem. When I fill in the filesystem over 95% (more or less). I get plenty of warnings like: Compactor::CompactDataBlock() - Warning, cached dirty sector count inconsistent for block 0x00000024 Compactor::CompactDataBlock() - Warning, cached dirty sector count inconsistent for block 0x000000c3 Compactor::CompactDataBlock() - Warning, cached dirty sector count inconsistent for block 0x0000019b Compactor::CompactDataBlock() - Warning, cached dirty sector count inconsistent for block 0x0000002d Compactor::CompactDataBlock() - Warning, cached dirty sector count inconsistent for block 0x0000015a Compactor::CompactDataBlock() - Warning, cached dirty sector count inconsistent for block 0x000002d5 Compactor::CompactDataBlock() - Warning, cached dirty sector count inconsistent for block 0x000002e4 Compactor::CompactDataBlock() - Warning, cached dirty sector count inconsistent for block 0x00000070 Compactor::CompactDataBlock() - Warning, cached dirty sector count inconsistent for block 0x0000014c Compactor::CompactDataBlock() - Warning, cached dirty sector count inconsistent for block 0x00000090 Compactor::CompactDataBlock() - Warning, cached dirty sector count inconsistent for block 0x00000175 The warnings appear sometimes as I finish the copy, sometimes after a reboot.... Every time I reboot a get plenty of warnings again... but with different block addresses. The filesystem seems to be OK anyway, but it's quite anoying. I don't find where these messages come (I've looked for them both in public and private folders). I've installed QFE untill June08 in case it solved it but it didn't. The only difference is that now I can use BLOCK_STATUS_RESERVED to protect some areas of my flash. Does anybody know where this comes from?? Thanks in advance, Buji Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114732
  - 8
    - Will "Bluetooth Pairing Service" get added to CE5.0/CE6.0? I am wondering if there is any information available on whether or not the Bluetooth Pairing Service that is available for Embedded NavReady will be made available for under "standard" Windows CE5.0/CE6.0 development. Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114726
  - 9
    - Win CE 6.0 ARMv4 Emulator and Activesync Hello. I am trying to get activesync to sync with my ARMv4 Emulator. I have come far but am now stuck on an issue that I don't know how to resolve. Basically what happnes is... I start the ARMv4 emulator, run the \windows\dmacnect binary and then cradle the device. Activesync then start to connect and establishes an connection but compains that it cannot determine the version of the active sync on the device and that maybe a firewall is blocking something. It also states that I need to maybe upgrade my ActiveSync. Now, I am running Platform builder 6 with all updates installed up to June 2008. I have Activesync 4.5 installed I have ActiveSync checked in the OSDesign catalog I dont have firewall checked in the OSDesign Catalog KITL is disabled and I manually edited the file deviceemulator-preri.bat to run KITL over ETHERNET. This is where I ran out of options. Any hep will be apreciated. Thanks Werner. Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114725
  - 10
    - Interrupt mechanism in "PCI to Serial driver" fails in WinCE 5.0 I am working on the "PCI to serial driver" that is an "I/O" based driver in CEPC(x86). "PCI to Serial driver" is 16550 compatable. I got the PCI part working and got instance of Template in the registry as well. I got all the resources like IOBase address and SysIntr and Irq number. Note:I have read all the values of serial port registers they are all correct. Now i wanted to Test the interrupt mechanism for serial driver by enabling THR empty interrupt. I envoke my Handler that is "IST" by calling the CreateThread. I used InterruptInitialise and gave the first parameter value (i,e Sysintr)as i got from instance of Template when PCI driver was loaded. InterruptInitialise registers the interrupt that calls successfully the OEMInterruptEnable and returns TRUE. My IST is initialised and waiting for event from the interrupt. Now i use WRITE_PORT_UCHAR with the first parameter as "baseaddress+offset of IER register" and second parameter as the value 0x2(will set IER for THR empty interupt), That makes my system hangs...:-( The interrupt is getting generated properly but seems no handler to relieve the interrupt. But i have already envoked my Handler in CreateThread function before interruptInitialise. Do i have to do something in OAL? How can i register the interrupt in CEPC for my device. Do i have to use the sharable mechanism giisr.dll/isr.dll from serial port driver? Need your expertise !!! Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114723
  - 11
    - Can we build and makeimg 2 different Platform at the same time ? Hi Can we build and makeimg 2 different Platform at the same time use 2 opened command shell scripts ? Thank you . Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114721
  - 12
    - Own a small business you want people to know about? Got a service you Own a small business you want people to know about? Got a service you can offer? or got something to sell? I created a NEW forum just for people to: Buy/sell/trade their used items, promote their business, post events, post job openings, find a roommate or an apartment/house for rent, search for jobs, post resume, meet people in their area, etc. . . Its a simple and easy way to let everyone know....and its free to join http://tinyurl.com/5eu4zj Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114704
  - 13
    - Network Problem Hi guys, I'm building emulator using Platform Builder 5.0. My emulator can't connect to network (using virtual switch). When I open Netwok Properties, It show Error Message : "Application ConnMC.exe has performed an illegal operation and will be shutdown. If the problem persist,contact the program vendor. Program : ConnMC.exe Exception : oXC0000001C Address : 8027F1DC Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114703
  - 14
    - Disabling"'PB Debugger Loaded/Unloaded symbols for..." debug messages Hi folks, I'm using CE 6.0R2 with VS2005/Platform Builder SP1, with KITL-over-Ethernet, and Kernel Debugging enabled for my OS Design. I have successfully built a 'Release' version of my OS Design, and it runs fine. I'm trying to disable PB's "Loaded/Unloaded symbols for..." debug messages, which aren't useful to me right now and just clutter up the Output window. Somehow I had disabled them previously, but after I cloned a BSP and starting working with the cloned BSP on the same OS Design, these messages started appearing again. I *do* want to see, and I am currently seeing, the debug messages from my application, and I do want to use Remote Tools. It's just those 'symbols loaded/unloaded' messages that I'm trying to turn off. I have tried for a couple of hours to figure out how I had turned off these messages before, but can't find where the option is hidden. Any help is appreciated! David K Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114701
  - 15
    - How to edit Msgbox size in wordpad? [Resolution : 240*320.] [OS : Wince 5.0] Msgbox size break through the screen width. How to change Msgbox size fit on screen? I have changed some resource file like msgbox_hpc.res. But I didn't figure out it. I need help. Thanks Kelvin Lee. Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114700
  - 16
    - How to change folder name at PND side in Mass storage mode Hi all: Is there somebody know how to change name in PND side to make the PC side detect the right name that i want in mass storage mode? Now I always see the "TFAT" and "Removeable Disk" on PC side in mass storage mode. But I want to change the folder name that I want. Is there any driver or registry can be configured for this? Best Regards Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114678
  - 17
    - How to start Bluetooth in CEPC? Hi all, I am working on CEPC X86 processor. On board I can see the Bluetooth in control panel of WinCE. When I search any device it shows the device(mobile) in list, it shows it is connected to mobile. When I transferring an image file from mobile to Board it shows "Unable to transfer file" and I don't know How files are transfer from WinCE to mobile? At the mobile side it detect the board name but enable to transfer files. Is anybody know how to handle it? Thanks in advance, Swapnil Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114670
  - 18
    - Convert XSD to C Structur Hello! I have a question for you. Currentky, I work on windows XE 5.0, And I need to convert some XSD files to C structure (.c & .h files) Do you know if some tools already exist? Because I don't want to code a convertor :p. I've found some tools working on others windows platform, but any on widows CE... In advance Thank you for your answers. bye Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114666
  - 19
    - Closing NetBios Port Hi, I'm working in the development of a Windows CE 5.0 based device wich works connected to a Ethernet Network. I've been able to close all the network ports uninstalling all undesired services like http, ftp, telnet and debug apps (CMAccept ...), but I'can not disable the Netbios UDP / Port 137 ( I've checked it with three network scanners and all of them found this port open). What can I do to close this port? Is there any option in Platfform builder that I should modify? Is there any good paper or webpage wich explains how to enhance network security in a Windows CE 5.0 based device? Thanks in advance!! Jordi Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114665
  - 20
    - Floating point - X86 Hi, Wince 5.0 and 6.0 If i add software floating point emulation (set BSP_FPEMUL=1 for 5.0 & SET SYSGEN_FPEMUL=1 for 6.0) and if my hardware also support floating point, whether the software emulation library checks for hardware FP and if present utilize it? or still SW FP will be running? I couldn't find the source files for this library to check it out. Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114660
  - 21
    - Block driver I have a 128MB nandflash. I want to write a block driver for this flash. However, I need to separate this flash to 3 storage( DSK1, DSK2, DSK3). For example, BINFS(part00) for system data, FATFS (part00) for Registry files and FATFS(part00) for User data. Is any example in Wince5.0 that can separate the flash to 3 storage disk...I have no idea how to write it.... Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114648
  - 22
    - PCMCIA issue We are developing a board with a Windows Ce 6.0 OS. It has PXA 27X core, with peripherals like WLAN, BT, GPS and lot of other stuff. The WLAN module is a CF card from Summit Communications and they have provided the driver for that also. We are able to work with that in normal mode. But problem comes when you suspend and resume the board. The client is going into D2 state and is not at all responding. Regarding this problem, the vendor has suggested WLAN client driver to be reloaded after a suspend/ resume cycle. I am quite not sure how to do that, as PCMCIA client drivers are not normally loaded by ActivateDevice() function. Normally when we take out and insert a CF card in to the slot, the pcc_serv.dll will detect this insertion and load the corresponding the driver. But since out board will be inside a rigid plastic, taking out and insertion of the card is not possible. Is there any way to do this in software? -- Vaisakh P S Software Engineer, Accord Software Systems Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114646
  - 23
    - SVGA, LCD, Win CE 6.0 and PB Hi, The orignal discussion of my problem is listed under "A black strip on right side of LCD" which may be too long to read. So, I summarize my problem and findings in one post here: The problem: I run Win CE 6.0 on an AMD CPU based SBC (Single board computer) board. I've got a black (blank) strip (100 pixels wide) at the right side of the LCD covering (or say, cut off) portion of the desktop image. What I've found: 1) I've got full 800 pixel wide desktop image when I run Win XP on the same board with the same LCD. 2) The BIOS image on the LCD is fine. It extends to the edge of the LCD screen. 3) I drive a CRT and an LCD simultaneously. While I have a black (blank) strip on the LCD, the image on CRT is ok (full 800 pixels wide). 4) When I select the LCD resolution setting in BIOS, the LCD clock rate and synch signals change accordingly. I have measured the timing of each signals at different settings. They were correct for that setting. Only the SVGA setting gives me a stable LCD display. The change of LCD modes in BIOS affects image size on CRT but Iâ??ve got a full desktop image on CRT no matter what LCD mode I select. 5) I played with resolution settings in boot.ini (w/ BIOS set at SVGA). Except the 800x600 setting, every other setting (higher or lower) actually shows a smaller image on both (CRT and LCD) screens with black (blank) strips all round. The actual resolution changes accordingly. On LCD screen in addition to the blank strip I still lose 1-2% desktop image at the right side (with SVGA setting, I lose 100/800=12.5%. What I lose is excatly the width of the blank strip). 6) Under SVGA resolution, if I move the mouse pointer behind the blank strip and do right-click, I can bright up a menu window. So, to the mouse, the screen resolution is SVGA. 7) My board can not read EDID. If I set BIOS read customer EDID, the LCD display is blank. The help I need: 1) Can anyone guess who the possible culprit of this problem is? 2) How can I troubleshoot (trace) this problem with PB? My board vendor thinks this is a display driver problem. But they use AMD BSP and they don't have detailed information (e.g. source code) about the driver. I doubt this is a display driver problem. Maybe I am wrong but I would think different display driver may provide some special features such as being efficient in some regards. But all of them should be able to drive a full desktop image, especially the display driver provided by AMD which should at least be tested for generic capabilities. Right? Hey, I am stuck. I even don't know what kind of experties to look for to solve this problem. Can anyone can shed me a light? Many thanks in advnace. John Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114644
  - 24
    - SD Client driver Hi everybody I'm developing a sd client driver and I would apprecciate if someone could solve my doubt. As I read, the bus driver of the host is responsible to do the first communication with the SD card and determine the appropriate client driver to load. To do this, the bus driver has to access the CIS area and get the CISTPL_MANFID. Another thing I've read is that you have to use CMD52 for reading a register. So I thought that it would be the first command that the host would send. But in my tests, I only received the following commands from the host: CMD5, CMD0, CMD1, CMD55. Is that correct? Do I have to receive all this commands before the command to get the Plug and Play information? Or does the host uses another command to do that? Thanks Regards, Guilherme Kami Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114637
  - 25
    - SDMMC driver from 4.2 working under 5.0. I'm tyring to get the SDMMC driver from 4.2 working under 5.0. I see the card in the the storage manager applet but cannot format it, It shows up as an active driver and everything seems to be ok with the exception of one thing I never see the "SDMMC Disk" folder in the file system. Registry is as follows; [HKEY_LOCAL_MACHINE\Drivers\sdmmc] "Dll" = "sdmmc.dll" "Prefix" = "DSK" "Order" = dword:1 "IClass"="{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\SDMMC] "Name"="SD/MMC Card" "Folder"="SDCARD" I am not sure what I am missing, haven't spotted anything to help in a debug build either.. Regards Tag: Does WinCE 5.0 supports Cyrillic Font ? Tag: 114636

Does WinCE 5.0 support Cyrillic fonts ? I could not find it in the font
catalog. Should I have to install any patch for the wince 5.0 to get
this ? How do I go about getting this font for my embedded device ?

Regards
Esha

Top

Re: Does WinCE 5.0 supports Cyrillic Font ? by Paul

Paul
Wed Aug 13 08:23:51 PDT 2008

It *supports* them. There are no built-in, Cyrillic-only, fonts, but
several of the basic fonts should have the right character sets (check
Tahoma). Any Cyrillic TrueType font that you purchase could be used on the
device, too.

Paul T.

"Esha" <iimeandmyself@yahoo.com> wrote in message
news:elFozPR$IHA.5004@TK2MSFTNGP05.phx.gbl...
> Does WinCE 5.0 support Cyrillic fonts ? I could not find it in the font
> catalog. Should I have to install any patch for the wince 5.0 to get this
> ? How do I go about getting this font for my embedded device ?
>
>
> Regards
> Esha

Top