Has the DirectShow Ksproxy filter been supported in wince5.0???

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Problem Installing Platform Builder 4.2 on XP SP2 I'm having a problem installing Platform Builder 4.2 on XP SP2. The Error: Error 1305. Error reading from file C:\WINCE420\PUBLIC\COMMON\OAK\LIB\ARMV4I\DEBUG\kbd8042jpn1_lib.lib. Verify that the file exists and that you can access it. This file is installed by the installer, and is present. I cannot view or copy the file as the result is a permission denied error. I can only assume that something is going wrong in the install and something that is supposed to release a lock on the file still has it or has crashed half-way through (without giving me an error.) Has anyone seen this before? It actually shows this file as a file a file that it is copying when it gives there error. Brad. Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102632
  - 2
    - Power Applet does not get updated on wince-5.0 Hello, On my custom board(imx31) based on wince-5.0 does not update the power applet. It always shows charging. But in the BatteryThreadProc() function in the battdrvr.c, I could find that the call to the function BatteryAPIGetSystemPowerStatusEx2() returns the correct status of the battery.That is it returns charging/not charing/external power etc. correctly. But somehow the power applet is not getting updated. I have commented out call to PowerPolicyNotify() when there is any change in battery status since when I call this function it returns with error that the "service has not been started". Does the call to PowerPolicyNotify() required to updated the power applet? On my system pm.dll is loaded and running. Could someone help me on this issue. Thanks, Shiju Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102630
  - 3
    - How can I cretat dll out of CE components/packages Hello All, I would like make Windows Mobile 5.0 to have some features available on Windows CE OS. You can choose needed packages in CE during initial making of BSP. But can I take those components and make it into dll or some thing else and install into Windows Mobile 5.0 For example I am interested in Supporting Httpd with ASP engine, VB, Java Scripts engine etc. Is it Possible to get them in dll form? Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102627
  - 4
    - Getting started with RTC API Hi This problem is for Windows CE 5.0 platform builder. I need some help getting started. (I'm obviously missing something so please help) I want to make calls to the RTC API and even the VAIL API for that matter from a third party application (in this case a WinDev Mobile application ~not important~). The reason why it is not clear exactly what must be included and called from my application is because I don't know exactly which files are used and needed to compile the dll's that provide VoIP functionality. So to be more specific: Is the entire RTC API accessible through rtccore.dll? if not, what else do I need? And what files are used to compile this dll? What about VAIL API, there is no dll? Even though the documentation tells you what interfaces to call, I don't know what I need to include in my app. (And the process of adding files to get rid of compilation errors is driving me crazy) I've not found anything of much help on MSDN, and I've read up on RTC etc on Platform builder help. Not helping too much. I can't imagine that it's too complicated, so please help me get started with making calls to RTC and VAIL API's in its simplest form :-) Rgds Marcel Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102624
  - 5
    - Can I avoid installing .Net Framework 1.1 and still install Platform Builder for CE 5.0? I have .Net Framework 2.0 and .Net Compact Framework 2.0 installed on my machine. It seems a little odd that I have to install .Net Framework 1.1. First, I am already using 2.0, second I am not installing this product to do desktop development, but Windows CE development. Finally, that development will likely be more C++ than .Net anyway. I assume that Platform Builder itself was written in .Net 1.1, but shouldn't it run under 2.0? Pat O Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102615
  - 6
    - USB and KITL : image download often hangs Hi everybody, We are having problems with downloading an image through USB on our platform. We have implemented USB RNDIS in our bootloader (based on rne_mdd) so that we can download (and also debug) our image through USB. During the developments, we did not have problem with the desktop machine we used for the download, we were able to load big NK.BIN files (tested up to 23MB). We are now trying to download using other desktop machines and the download often hangs after 5MB. It seems that when we have a standalone machine (not connected to the network), the situation is better (but not perfect). When changing USB IDs, the situation is temporarily better. Moreover, some MAC addresses (that we can configure in our bootloader menu) make the download impossible. Using a USB sniffer software on our desktop, the last frame sent is an acknowledge from the device to the desktop. Our hardware platform is based on the S3C2412 processor from Samsung, and the OS is CE5. Desktop PCs are all WindowsXP. Has someone else already had such a problem? Somebody has an idea? Is there a "magic" configuration of the desktop that could solve all our problems? Thanks in advance BR -- -- -- ---------------------------------------------------------------- Anthony Pellerin (eMVP) ADENEO (ADESET) Windows Embedded Consultant <apellerin AT adeneo DOT adetelgroup DOT com> http://www.adeneo.adetelgroup.com Tél : +33 (0)4.72.18.57.77 Fax : +33 (0)4.72.18.57.78 ---------------------------------------------------------------- Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102611
  - 7
    - How to configure the environment variable like IE_MODULES_WININET Hi all, I have a problem here. I want to modify certain configuration for the Internet Explorer in the Public folder of WINCE500. I want to remove the usage of wininet. Pardon my ignorance, but i think I need to set the enviroment variable of IE_MODULES_WININET to "" then i can exclude it from the build. Can anyone tell me where do i set these setting? Thanks Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102608
  - 8
    - How to make BINFS partition mounted and visible in explorer? Hi All, I make two partitions on a 64MB NAND flash of my board. MBR at Block 0 part00, BINFS, 16MB part01, FAT32, 47MB After Wince startup, the FAT partition is mounted and visible as a folder named "ResidentNandFlash". But BINFS partition is not mounted, cause I check in Storage Manager, part00 has no "*" mark beside and is not mounted. The following is the relevant registry settings in platform.reg ========================================= [HKEY_LOCAL_MACHINE\System\StorageManager\PartitionTable] "21"="BINFS" "0B"="FATFS" ;MS-DOS FAT32 [HKEY_LOCAL_MACHINE\System\StorageManager\BINFS] "Folder"="BINFS" "FriendlyName"="BIN_FS" "Dll"="binfs.dll" "MountFlags"=dword:0 ;MountAsROM, but not Hidden ; "Paging"=dword:1 "BootPhase"=dword:0 [HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\Nand] "DriverPath"="Drivers\\BuiltIn\\Nand" "LoadFlags"=dword:1 ;LoadFlags 0x01 == load synchronously "MountFlags"=dword:10 "BootPhase"=dword:0 ; "Order"=dword:0 [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Nand] "Prefix"="DSK" "Dll"="NANDDRV.DLL" "Order"=dword:2 ; "Ioctl"=dword:4 "Profile"="Nand" "IClass"="{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" "Flags"=dword:1000 . "FriendlyName"="MSFLASH NAND Driver" "BootPhase"=dword:0 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\Nand] "DefaultFileSystem"="BINFS" "PartitionDriver"="mspart.dll" "Name"="NAND FlashDisk" "Folder"="ResidentNandFlash" "AutoMount"=dword:1 "AutoPart"=dword:1 "MountFlags"=dword:10 ; "AutoFormat"=dword:1 "BootPhase"=dword:0 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\Nand\FATFS] ; "Dll"="FATFS.DLL" ; "Util"="FATUTIL.DLL" "MountFlags"=dword:0 "AutoMount"=dword:1 "AutoPart"=dword:1 [HKEY_LOCAL_MACHINE\System\StorageManager\FATFS] "MountFlags"=dword:0 ========================================= Anyone can give me a hint to make BINFS visiable in WINCE explorer? Thanks in advance. D.H Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102599
  - 9
    - Wince 5.0 Stress Tool Hi, I have run stress tool on wince 5.0 as per the procedure given at http://msdn2.microsoft.com/en-us/library. It is running but i am not able to see where the result log(*.xml) file will be created. Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102598
  - 10
    - Something may be wrong with the smart device setup CAB file Hi, all: Recently I encountered a strange problem. I built a smart device CAB project via VS.NET 2005. The CAB file is built successfully and the installation is done well. But I found a big problem: the cabwiz application seems not to recognize the same files which is placed in different folders. I have two files which share the same name but with different contexts. I place them in different folders in the CAB project. After installation, these files are not placed into the valid folder. For example, in the setup project, D1 folder contains a file named aaa and D2 folder also contains a file named aaa. Their contents of aaa file is different. After installation, the aaa files are exchanged between D1 folder and D2 folder. Do you encounter such problem ever? I think this should not happened in VS.NET 2005. Hope you can help me. Thanks very much! Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102594
  - 11
    - PEAP IEEE802.1x authentication on CE4.2 I have two problems with IEEE802.1X authentication (PEAP) on Windows CE 4.2: 1) After a successful authentication to an access point with PEAP, if I try to connect again to the AP (without disconnecting) the platform doesn't authenticate again to the radius server: (Authenticating ... Reauthenticating ... reauthenticating ... with no successful authentication) and the result is the same if i try to connect again. If i watch with a sniffer to the trame exchanged between the AP and the platform, the following sequence occurs: a) the platform tries to start an EAP session b) the AP acknowledge the platform request c) the platform sends his identity d) the AP acknowledge the platform request e) the transaction stops here ! Note: if i connect to another AP with no IEEE802.1X authentication when the problems occurs, there is generally no problem to reconnect to the PEAP AP after. 2) Exceptionnaly, after a boot of the platform or a enable/disable of the wireless card, the connection failed like in 1) but finish after a few time to be established (3 minutes seems to be generally good) I don't know if my two problems are linked, but it is the 2) problem that makes me discover the 1) problem. The platform is an x86 based platform. All the QFE has been applied before building the platform. Best Regards, R=E9mi Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102593
  - 12
    - PowerPolicyNotify breakpoint on Wince-5.0 Hello, On our custom board when the wince boots it keeps on breaking at the below statement. fOk = PowerPolicyNotify(PPN_POWERCHANGE,0); DEBUGCHK(fOk); Could someone help me what might be the problem and how could I resolve it. Thanks, Shiju Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102592
  - 13
    - Keyboard filter driver for WM Hi All, i want to write a keyboard filter driver for WM devices. Do we have any sample driver in platform builder? I want to hook the keyboard and eat up the keystrokes. Please do not suggest SetWindowsHookEx as it does not work with many devices. R Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102590
  - 14
    - Private source code hi all, it is illegal to change the private code of windows ce 6.0 and publishing an article regarding the changes for solving an device specfic issue? Please let me know. Thank you, -- vinoth.R Technical Lead e-consystems India Pvt Ltd www.e-consystems.com Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102580
  - 15
    - MP3 AVI DIVX MPEG SOFT = www.GEGEREKA.com Millions files for everyone. Music, movies, soft and other media. Check it now!! http://www.gegereka.com Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102578
  - 16
    - Installation of Windows CE 4.2 Hi all, I'm having WinCE 5.0 and WinCE 6.0 (With VS 2005 SP1) on separate partitions with .NET 1.0 and 2.0 installed. Now i need to install Windows CE 4.2 in my PC. So i want to know, whether i can simply install it in a separate partition or i've to do something before installing. When reinstalling CE 5.0 some months back, i got some issues regarding core con connectivity, but i have solved that. Thats why i'm afraid whether i'll get some problems after installation??? ( Then i've to reinstall all the three :( )What i've to do??? Regards, Mekas :) Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102566
  - 17
    - 64 bit processor Hi all, O.S-Win CE 4.2. Processor - AMD turion 64 bit I wanted to confirm whether wince 4.2 supports the above processor, since in the wince architecture it has been mentioned has 32-bit operating system??? or any changes required??? Thanks in advance, Regards, Sankarraj, S Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102564
  - 18
    - DMA driver Hi, I am sort of a newbie to DMA. But now i am supposes to make a DMA driver, basically a driver which will talking to the DMA controler on my board. For this I have few questions 1) What is burst size and how is it related to DMA 2) Would making the DMA driver similiar to a stream interface driver be a correct design? 3) Do I need to modify the API's HalTranslateSystemAddress or HalAllocateCommonBuffer etc for the same 4) What is the difference between a DMA driver and a DMA adapter? Thanks Anwar Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102562
  - 19
    - How to set up multiple ip addresses on a single network adaptor? Hi, all? I'm finding a way to set up multiple ip addresses on a single ethernet card? How can I build it? Any pointers to related material would be also appreciated. Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102559
  - 20
    - How to set default cluster size of nand flash at flash memory form Hi, all? I wanna know if there is any way to change the default filesystem or cluster size value when formating nand flash with 'control panel --> storage manager'. Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102558
  - 21
    - WPA2, AES PB 5.0 Our WLAN driver supports WPA2. We have configured our access point to support WPA2, AES. When I connect with my laptop with WPA/AES type, it is getting connected after I provide USERNAME/PASSWORD/DOMAIN But If I choose the same configuration/credentials in my WINCE device - WPA2/AES/PEAP, popup comes asking for username and password. Even if I give the details correctly, popup keeps coming up asking for the credentials. After few tries it says cancelled authentication. 1) Does this combination is supported in PB5.0 - WPA2/AES ? Following are the settings we were asked to setup by the people who configured AP. The Radius details are as follows: a. Data encryption - AES b. EAP type - PEAP c. No Certificate validation required d. Authentication method - secured password (EAP-MSCHAP.V2) 2) I was able to do the the first three settings(a, b and c) in my wnce device. I assume PEAP authentication always follows EAP-MSCHAP.V2 method. Is that correct ? Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102557
  - 22
    - Surprise Remove to the USB Audio driver Dear Experts, I'm developing USB audio driver for the WindowsCE5.0. Until now, everything is good execept handling surprise remove USB audio device. The problem is i'm playing music via Media player and surprising remove device without stop music first. Then system generates error message "SwMixer:WaitForBuffer failed. Audio driver missed interrupt?". For the bug, i've done experiments: 1. When get error from lpIssueIsochTransfer(), i process the data i've received at first then return "MMSYSERR_ERROR" to OS in the WODM_WRITE request. 2. Besides 1. i also unload our device. // via DeactiveDevice(pUSBWave->hStreamDevice). Both of the cases system returns the same error:"SwMixer:WaitForBuffer failed. Audio driver missed interrupt?". I wonder is it SwMixer cannot support surprise remove or driver has to do more? Sincerely, Hsiang Hua, Chao C-Media Inc. Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102556
  - 23
    - What is RTH.exe in the NK.bin? Hi All, I tried to find information with regards to RTH.exe which is part of the NK.bin image. Pardon my ignorance, can some one please tell me what does RTH.exe do? What is it consist of (what dlls being used) and whether is it possible to exclude it usage. Sincerely Jimmy Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102555
  - 24
    - Registry settings for RAS server Hi, I'm struggling with the RAS server application for an ARMV4I board with wince 5.0 for quite a while.. The server seems to start-up well - I did not change any of the settings. At first, I tried adding a line with the device name of "Serial Cable on Com Port:", since this is the "friendly name" of the unimodem I had in HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial\Unimodem. when using the LineConfig function, I received an error - 659 (device not found). I saw that when looking for the adopter, the device name and type that mine was compared to is "Hayes Compatible on COM1:" with "modem" type, so I changed my device name and type, which seemed to work, since all the result values were successful (though I did not see any GUI to change the settings). I added this to my project.reg as well: [HKEY_LOCAL_MACHINE\Comm\ppp\Server\Line\"Hayes Compatible on COM1:"\] "Enable"=dword:1 "DeviceType"="modem" "Flags"=dword:2 I created a new connection on my PC (win-XP, which is connected with the serial port to the board) as a guest, directly to another computer, with the maximum speed of 119200 KB, Hardware control disabled. When I tried to connect (after starting the RAS server), I received the following error message: Error 777: The connection attempt failed because the modem (or other connecting device) on the remote computer is out of order. which is the same error received when the board is disconnected. The serial port surely works, since I can use the hyper terminal to control it. Any help will be most welcome.. ~Y. Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102550
  - 25
    - sqlmobile and server 2000 question I'm using the RDA - Pull method to download data from my SQL Server 2000 database to my WINCE5.0. I have this working fine in my environment, but when I try to run it on a clients network I am getting an error. Error Code: 80070005 Message : Minor Err.: 0 Source : Microsoft SQL Server 2005 Mobile Edition" When I browse out to the SSCESA30.DLL file from IE Explorer, I do get "Microsoft SQL Server Compact Edition Server Agent" returned, but only if I enter the domain (along with UID & PWD) when prompted from the explorer session. Do I need the domain somewhere in the connection string of my program? All I have in it now are the URL Login & URL Pwd. If I do, can anyone give me an example of how I would add it to my vs2005 code. Thanks. This is my code: Private Sub pull() Dim strLocalConnect As String Dim strRemoteConnect As String strRemoteConnect = "Provider=SQLOLEDB;Data Source=LF- WINXP;User ID=sa;Password=jianwei;Initial Catalog=SPMS2005" strLocalConnect = "Data Source=" + DatabaseName Try Dim rda As SqlCeRemoteDataAccess = New SqlCeRemoteDataAccess() Dim strSelectTablerToD As String strSelectTablerToD = "SELECT * FROM dbo.issue" rda.InternetLogin = "" rda.InternetPassword = "" rda.InternetUrl = strInternetURL rda.LocalConnectionString = strLocalConnect rda.Pull("xx", strSelectTablerToD, strRemoteConnect, _ System.Data.SqlServerCe.RdaTrackOption.TrackingOff) Catch ex As SqlCeException ShowErrors(ex) End Try End Sub Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102548
- Next
  - 1
    - sqlmobile and server 2000 question I'm using the RDA - Pull method to download data from my SQL Server 2000 database to my WINCE5.0. I have this working fine in my environment, but when I try to run it on a clients network I am getting an error. Error Code: 80070005 Message : Minor Err.: 0 Source : Microsoft SQL Server 2005 Mobile Edition" When I browse out to the SSCESA30.DLL file from IE Explorer, I do get "Microsoft SQL Server Compact Edition Server Agent" returned, but only if I enter the domain (along with UID & PWD) when prompted from the explorer session. Do I need the domain somewhere in the connection string of my program? All I have in it now are the URL Login & URL Pwd. If I do, can anyone give me an example of how I would add it to my vs2005 code. Thanks. This is my code: Private Sub pull() Dim strLocalConnect As String Dim strRemoteConnect As String strRemoteConnect = "Provider=SQLOLEDB;Data Source=LF- WINXP;User ID=sa;Password=jianwei;Initial Catalog=SPMS2005" strLocalConnect = "Data Source=" + DatabaseName Try Dim rda As SqlCeRemoteDataAccess = New SqlCeRemoteDataAccess() Dim strSelectTablerToD As String strSelectTablerToD = "SELECT * FROM dbo.issue" rda.InternetLogin = "" rda.InternetPassword = "" rda.InternetUrl = strInternetURL rda.LocalConnectionString = strLocalConnect rda.Pull("xx", strSelectTablerToD, strRemoteConnect, _ System.Data.SqlServerCe.RdaTrackOption.TrackingOff) Catch ex As SqlCeException ShowErrors(ex) End Try End Sub Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102547
  - 2
    - Basic question with TCP and serial port If I build an image that DOES NOT have an Ethernet connection but does have your basic serial ports. And I include things like a RAS server and/or FTP server, How can I set an I/P address? I know how to set the TCP/IP address parameters for an Ethernet device but not for a serial device. Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102546
  - 3
    - My top wish for CE6 SP next Fix all the CE 5 and CE 6 side by side install issues and make all the different versions of the remote tools (VS2005,PB5 and PB6) play nicely together. Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102545
  - 4
    - NK.bin for SMDK2410 not built Hello, I want to build WinCE 4.2 for an Acer N30. Build returns without errors, Make Image runs fine, too. But it produces only chain/core/DRIVERS/EBOOT/xip.bin. You find the output below. postromimage.bat only demands the NK.bin, which it can't find. Building for Emulator x86 outputs a single NK.bin, it run's fine. To flash the SMDK2410 image to the device I need a NK.BIN as available from Acer for updating the device. What do I need to get one .bin instead of five? Please can you hint what I should look out for? Best Regards, Sasha ---- Make Image ... Writing C:\Programme\WINCE420\PUBLIC\mySmallSamsung\RelDir \EMULAT~2\NK.bin Table of contents 812e4050 0000161c ( 5660) Writing ROM signature and TOC pointer at 80240040 Kernel data copy section 8086af74 00000020 ( 32) ROM Header 812e3ffc 00000054 ( 84) First DLL code Address: 02de0000 Last DLL code Address: 04000000 First DLL Address: 01ec01ec Last DLL Address: 02000000 Physical Start Address: 80240000 Physical End Address: 812e566c Start RAM: 812e6000 Start of free RAM: 81325000 End of RAM: 81c00000 Number of Modules: 120 Number of Copy Sections: 2 Copy Section Offset: 8086af74 FileSys 4K Chunks/Mbyte: 128 <2Mbyte 128 2-4Mbyte 0 4-6Mbyte 0 >6Mbyte CPU Type: 014ch Extensions Pointer: 80245a80 Total ROM size: 010a566c ( 17454700) Starting ip: 802ab798 Raw files size: 000d3ddd Compressed files size: 0008099d Compacting bin file... Done! makeimg: Check for C:\Programme\WINCE420\PUBLIC\mySmallSamsung\RelDir \EMULAT~2\PostRomImage.bat to run. Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102543
  - 5
    - Windows CE HOT Key Hi, In the windows ce devices hard keys like answer and hangup keys performs only when phone is active. I have question that which part or the driver of the system comes to know that phone is active ( Typically it is when Internal speaker is set) and now allow these keys to perform. If we find any module then what is the way to communicate with that using application level programming ? I am expecting I'll defiantly get the answer. Thanks, Niraj Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102542
  - 6
    - Duplicated NAND folder after using Hive-Based Regsitry Hi Everyone, I have an evaluation board which originally sets to use RAM-Based Regsitry. This board uses one 128MB NAND flash and there is no IPSM. Therefore changes to Registry will lose after a power cycle. I changed RAM_Based Registry to HIve_Based Registry and modified the common.reg as the following: [HKEY_LOCAL_MACHINE\init\BootVars] "SystemHive"="NAND Flash\\system.hv" "ProfileDir"="NAND Flash" "Flags"=dword:1 "RegistryFlags"=dword:1 "Start DevMgr"=dword:1 "DefaultUser"="User" I rebuilt the OS and the device had no problem launching the OS. But I found in addition to "NAND Flash" folder, there is another folder called "NAND Flash2" and contents in there two folders are the same. Is it because that I want to store system.hv in NAND Flash folder? Why could that happen and how to fix it? Thanks, James Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102534
  - 7
    - wince 6.0 Exception in gwes hangs kernel on startup Hello, Am attempting to port a 5.0 device to 6.0 and have ran into an exception I can't find the cause of. The error message given is: Exception 'Data Abort' (4): Thread-Id=03b60002(pth=87df4aec), Proc-Id=00400002(pprc=80153308) 'NK.EXE', VM-active=00400002(pprc=80153308) 'NK.EXE' PC=c0190620(gwes.dll+0x00050620) RA=c0190608(gwes.dll+0x00050608) SP=d06cfddc, BVA=00000104 And from gwes.map I see the return address 0x00050608 falls between MaskBlt_I and StretchBlt_I in blt2.obj. MaskBlt_I is not referenced in the Platform code, and for an experiment I built the device with no display, but received the same error (???) Any clues where to investigate the possible cause? Thanks in advance for any input. Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102533
  - 8
    - NDIS crash when Hi, I have a problem with NDIS crashing sometimes when I suspend my system (Samsung S3C2410 CE5.0). It happens maybe after an hour if I sleep/ resume in 15 s intervall. The image has a driver cs8900.dll for a cs8900 ethernet chip. Also, a GPRS modem is present. If I remove the cs8900 driver the crash doesn't happen. The crash happens just after I set the cs8900 chip in HW Suspend before suspend. This is done thru OID_PNP_CAPABILITIES IOCTLs. This is how the debug output looks: CS8900:: OID_PNP_SET_POWER to [NdisDeviceStateD3] CS8900SetNdisDeviceStateD3 Data Abort: Thread=85ea3c00 Proc=8c226400 'device.exe' AKY=ffffffff PC=03b645e4(ndis.dll+0x000045e4) RA=3b743b74(device.exe +0x01733b74) BVA=3b743bc8 FSR=00000005 OEMIoControl: Unsupported Code 0x10100f4 - device 0x0101 func 61 Data Abort: Thread=85eacd94 Proc=8c226400 'device.exe' AKY=00000005 PC=03ad44d8(tcpstk.dll+0x000144d8) RA=03ad44a4(tcpstk.dll +0x000144a4) BVA=3b743b7e FSR=00000005 After this the system sleeps, then it can wake up on interrupt or RTC alarm. But then it crashes immediately. I've tracked (ndis.dll +0x000045e4) to function NdisInterlockedAddUlong by looking in ndis.map. Any ideas? Next step is to use debug version of ndis.dll Regards, Jojje Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102526
  - 9
    - storagemanager registry setting... hi, all? I'm finding some registry value that set default filesystem format(fat16 or fat32) when user run the format operation from 'control panel --> storage manager' By default, the storage manager seems to format the nand flash by fat32. How can I change the default setting to fat16. Isn't there any registry settings for it? Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102525
  - 10
    - 802.1x implementation over LAN hi all, It's a general question regarding 802.1x over LAN. My question is - can we write device driver to implement 802.1x in wince 5.0? if it is possible, where it can be implemented in a ndis device driver stack(i mean can this is implemented at NDIS miniport driver level?). thanq all. Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102519
  - 11
    - Daylight saving time problem with PB5.0 Hi everybody, With PB 5.0 on a PhyCore PXA-270 (BSP from Adeneo), I try to put on Daylight Saving Time ('Paris' time zone). I have installed all the QFE for Wince 5.0 and added the 'SNTP Client with DST' component to my image. In my 'Project.reg file, I've added : [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Clock] "AutoDST"=dword:00000001 "ShowDSTUI"=dword:00000001 In the 'Paris' time zone, on sunday October 28th, 2007, when the hour will pass of 2:59AM to 3:00AM, then the hour must be adjusted to 2:00AM... This is my procedure to test Daylight Saving Time mechanism : - With 'Date/Time Properties', I set the RTC to sunday October 21th, 2007 2:00AM (one week before date/time transition) and I validate. - With 'Date/Time Properties', I set the RTC to sunday October 28th, 2007 2:55AM (5 minutes before the time transition) and I validate. - I wait 10 minutes, but nothing happen and the time continue to be normally incremented. - After this time (eg 3:05AM), if I go again in the 'Date/Time Properties' and I validate without changing anything, WinCE 'see' the time transition and set the time to 2:05AM with displaying a dialog box that inform me that the time has been changed automatically. By trying to resolve this problem, I found something curious : when I sysgen (with "clean before building" option), I see a warning about "tsvc_dst" : makeimg: Warning Localization FAILED: Could not find C:\WINCE500\PBWorkspaces\PhytecDevelBoard_DEMO\RelDir\phyCore-PXA270-DK_ARMV4I_Debug\tsvc_dst.DLL|EXE|CPL I have installed PB5.0, cleaned the folders, installed PB5.0 and all QFE's (up to 05-2007) but I have always this warning and the Daylight Saving Time don't work automatically. Can someone help me ? -- oVo olivier vigliengo tma fr . @ . Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102510
  - 12
    - Hive VS RAM -Based Registry What's the difference between Hive-Based Registry and RAM Based Registry? (And what about hard reset with each one of them?) Mhaxx Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102508
  - 13
    - What does this error message mean? USB Bulk-in operation. Unknown: DEBUGCHK failed in file E:\WINCE500\PUBLIC\COMMON\OAK\DRIVERS\USB\HCD\USB20\EHCI\.\ctd.cpp at line 282 DWORD CQTD::IssueTransfer(DWORD dwPID, BOOL bToggle1, DWORD dwTransLength, PPhysBufferArray pPhysBufferArray,BOOL bIoc) { CheckStructure (); if ( pPhysBufferArray ==NULL ) { ASSERT(FALSE); return 0; } ASSERT((pPhysBufferArray->dwBlockSize== dwTransLength + (pPhysBufferArray ->dwStartOffset & EHCI_PAGE_OFFSET_MASK)) || pPhysBufferArray->dwBlockSize == EHCI_PAGE_SIZE); DWORD dwMaxPacketSize = (m_pTrans->m_pCPipe->GetEndptDescriptor()).wMaxPacketSize & 0x7ff; DWORD dwMaxPacketNumber=(EHCI_PAGE_SIZE* MAX_QTD_PAGE_SIZE)/dwMaxPacketSize; DWORD dwTotalTransfer=min(dwTransLength,dwMaxPacketNumber*dwMaxPacketSize); DWORD dwTotalPage = (pPhysBufferArray ->dwStartOffset + dwTransLength + EHCI_PAGE_SIZE -1)/EHCI_PAGE_SIZE; ASSERT(dwTotalPage<MAX_QTD_PAGE_SIZE+1); // <============== for (DWORD dwIndex=0;dwIndex<dwTotalPage && dwIndex<MAX_QTD_PAGE_SIZE+1;dwIndex++) { qTD_BufferPointer[dwIndex].dwQTD_BufferPointer = (pPhysBufferArray ->dwArrayBlockAddr[dwIndex] & EHCI_PAGE_ADDR_MASK); } qTD_BufferPointer[0].qTD_BPContext.CurrentOffset = pPhysBufferArray ->dwStartOffset & EHCI_PAGE_OFFSET_MASK; qTD_Token.qTD_TContext.PID = (dwPID== TD_OUT_PID ?0:(dwPID==TD_SETUP_PID?2:1)); qTD_Token.qTD_TContext.C_Page= 0; qTD_Token.qTD_TContext.IOC=((dwTotalTransfer < dwTransLength)?0:(bIoc?1:0)); qTD_Token.qTD_TContext.BytesToTransfer=dwTotalTransfer; qTD_Token.qTD_TContext.DataToggle=(bToggle1?1:0); qTD_Token.qTD_TContext.Active = 1; return dwTotalTransfer; } Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102499
  - 14
    - Dial up connection user name password in registry In CE 4.2 ,I was able to save the user name and password for dial up connection in the registry without any problem. But in 5.0 ,though the user name and password are retained in the system,I am not able to find appropriate registry where the user name and password are stored,so that I will be able to include them in the OS. Can someone let me know where the user name and password are stored. Thanks Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102495
  - 15
    - Limitations of cmd.exe on CE Hi, It seems like the command processor cmd.exe on CE(4.2) is a heavily reduced version of the "cmd.exe we know". It looks like quite a few commands are not supported in it. For example 'for", "find", "more", etc... are not available. The "for" instruction is quite handy to have, actually I should say it's really a pain in the axx to not have it. I wonder if there is a way to add support for these commands and have a full featured command prompt, suitable to run some batch files, or is it hopeless and I should forget about running a non trivial .bat script on CE. Any experience in that domain? Thanks. Alex Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102492
  - 16
    - GetGeneralIFConfig Error Our platform is a PXA255 WinCE 4.2 with a 802.11g CF Radio Module. Upon inserting the WIFI adapter GetGeneralIFConfig errors are reported by our debug build of CE 4.2. OpenIFConfig(Comm\SDCF10G1\Params\TCPIP *Handle 0x83FE4C4, BOOL Ret: 1) +GetGeneralIFConfig(ConfigInfo 0x83FE4C98 Handle 0xA2730) GetGeneralIFConfig:Unable to read DefaultGateway value! GetGeneralIFConfig:Unable to read DNS value! GetGeneralIFConfig:Unable to read WINS value! GetGeneralIFConfig:Unable to read UseZeroBroadcast value! All-nets boadcasts will be addressed to 255.255.255.255 What causes this type of error? Thanks. Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102491
  - 17
    - Why is the CE6 build process so slow ? While doing a build, my machine gets stuck at NETCFV2_MODULES= dotnetv2 for 5 or 10 minutes. How can I speed up this build time ? Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102488
  - 18
    - Localisation of TIMESRV (tsrv_dst warning) CE 5.0 <<<<Apologies if you have already seen this and responded to this on "microsoft.public.win32.programmer.wince", I posted it to the wrong group (!!!!) so am reposting here.>>>> The only warning I have left on my platform build is as follows: makeimg: Warning Localization FAILED: Could not find C:\WINCE500\ ... \tsvc_dst.DLL|EXE|CPL This appears to be because the module "timesrv.dll" which handles daylight saving time builds in a static library tsvc_dst.lib which includes a localisable string table "tsvc_dst.res". So, the file that should be being localised is "timesrv.dll" and all the localising string tables are called "tsvc_dst.res". The makefile in CESYSGEN is adding "tsvc_dst" to "servers.loc" so that when makeimg comes across this file, it can't find an executable an executable with that name, ergo the warning. So.... 1. I am assuming that "timesrv.dll" has not been localised correctly. (Not too much of a problem for me, but I'm sure not the best situation if you're German, Spanish, Italian, etc....) 2. I am also assuming that I could patch my release directory copy of "servers.loc" in "PreMakeImage.bat" with something that fixes this problem. But what is this? How do I get to localise "timesrv.dll" using the resources for "tsvc_dst.dll" ???? Anyone that's got this far down such a complicated (& admittedly boring) post deserves a prize!!!! If you can give me the answer, I might even send you one!!!! Thanks in advance, Andrew. Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102486
  - 19
    - Unicode Script Processor Hello Everybody, Has anyone tried adding indic or complex script support to wince 5.0. How is the performance? I have observed that the indic support with Mangal font based UI works considerably slow, has anyone observed otherwise. Also, I have observed that the months(in Marathi indic language) in the system calender paint as fast as its US English counterpart however it paints slowly from a DOTNET and MFC application. Is it a issue related to Complex script if yes is there any alternative solution??? In anticipation of a reply ASAP Regards, Ann Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102479
  - 20
    - installable Interrupt I actually have my installable interrupt routine working but I was hoping someone could explain some things about it to me? I see how the "instance" gets created, I call LoadIntChainHandler then I setup ISR_INFO... and pass it via KernelLibIoControl now KernalLibIoControl calls the IoControl routine inside my in dll, with an "instance" my dll also has a routine called CreateInstance How does CreateInstance get called ? how does the kernal know how many "instances have been created? my assumption is that the call to LoadIntChain.. calls CreateInstance and keeps track of the number of instances but I cant prove this... then when an interrupt occurs, the kernal calls my isrHandler once for each "instance" created during loadInt call until it gets a return value other then SYSINTR_CHAIN ?, Now I have and interrupt service thread routine that is waiting on an event, how does this get event get created ? Just want to make sure I understand how this really works... Thanks, Joe Welfeld Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102477
  - 21
    - CEPC Does not recognize Hard Drive Hi, I have installed WinCE 5.0 & Platform Builder on a Windows XP desktop computer, having these characteristics: - CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz - RAM: 512 MB - Hard Disk: 20 GB My CEPC has the following configuration: Processor : AMD Inc., i486 Mother Board : RS482M4 Chip set : ATI =AE SB450 Hard Drive : 20GB, Western Digital WD200BB-75AUA1 PC Model : Wipro Super Genius These are the steps I made: - I followed the procedure mentioned in the Platform Help "How to Configure Hard Disk Drives on a CEPC" and added FAT file system / storage device/wordpad to the OS design and built the OS image nk.bin. - I booted another machine(CEPC) from the floppy which has the boot sequence - I attached the Windows XP desktop computer to the CEPC through Ethernet & loaded the nk.bin to CEPC Wince runs correctly on CEPC but I have some problems: 1) The hard disk drive is not recognized, even if in the OS design I have inserted all the needful drivers and applications, as explained in the Platform Help (section "How to Configure Hard Disk Drives on a CEPC"). 2) The computer BIOS recognises hard drive. 3) Do the drivers of ATI =AE SB450 support WINCE? Can someone please give me some advice or some useful link? Thanks in advance. ---------------------------------------------------------------------------= ----- Bhavani Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102468
  - 22
    - Wince4.2 + S3C2440 USB device and activeSync with NOTIFICATION_EVENT_RS232_DETECTED CPU:S3C2440 Debut COM:com2 application COM:com1 I had added the USB function and serial driver. after cold start/reset , system works okay and when I pluged the USB device , ActiveSync could connected and works well, but after I run my com port testting application( the COM1 will continuely receiving the extral data), the debug port outputting the many information like below: -------------------- Event occurred : NOTIFICATION_EVENT_RS232_DETECTED SL_ModemIntr - pHWHead->OpenCount 0 !pHWHead->OpenCount : 0x0 IsAPIReady(SH_WMGR) == true Indicating RS232 Cable Event Event occurred : NOTIFICATION_EVENT_RS232_DETECTED SL_ModemIntr - pHWHead->OpenCount 0 !pHWHead->OpenCount : 0x0 IsAPIReady(SH_WMGR) == true Indicating RS232 Cable Event Event occurred : NOTIFICATION_EVENT_RS232_DETECTED SL_ModemIntr - pHWHead->OpenCount 0 !pHWHead->OpenCount : 0x0 IsAPIReady(SH_WMGR) == true Indicating RS232 Cable Event Event occurred : NOTIFICATION_EVENT_RS232_DETECTED SL_ModemIntr - pHWHead->OpenCount 0 !pHWHead->OpenCount : 0x0 IsAPIReady(SH_WMGR) == true Indicating RS232 Cable Event Event occurred : NOTIFICATION_EVENT_RS232_DETECTED SL_ModemIntr - pHWHead->OpenCount 0 !pHWHead->OpenCount : 0x0 IsAPIReady(SH_WMGR) == true Indicating RS232 Cable Event Event occurred : NOTIFICATION_EVENT_RS232_DETECTED SL_ModemIntr - pHWHead->OpenCount 0 !pHWHead->OpenCount : 0x0 IsAPIReady(SH_WMGR) == true Indicating RS232 Cable Event Event occurred : NOTIFICATION_EVENT_RS232_DETECTED ..... ---------------------------------------------------- I checked some register settings and serial driver code , could not found any error. Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102462
  - 23
    - SD card I/O Hi All, I have WinCe 5.0 on S3C2440A platform .I am working on a navigation device and my application ,data is stored in a SD card.Iam facing problems with suspend and resume.My application is freezed for few seconds after resuming form suspend state.I read many discussions regarding this issue in groups.I have tried to set the values for "PNPUnloadDelay" and "PNPWaitIODelay".After this chnages my device is not waking up from suspend itself.Anybody please suggest some solution to resolve this issue. Thanks in advance. Sam Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102461
  - 24
    - X86 emulator : ping not happening Hi, I've built the x86 emulator internet appliance platform.The network driver "dc21x4.dll" will be loaded but I'm not able to ping from emulator to my desktop pc or to the default gateway.It gives "transmit failed:error 11010. ipconfig command is showing the IP address. I've disabled DHCP & assigned static IP address with default gateway being same as that of my desktop pc.I modified platform.reg as follows: [HKEY_LOCAL_MACHINE\Comm\DC211401\Parms\TcpIp] ; @CESYSGEN IF CE_MODULES_DHCP "EnableDHCP"=dword:0 ; This should be MULTI_SZ "DefaultGateway"="192.xxx.y.1" ; Use zero for broadcast address? (or 255.255.255.255) "UseZeroBroadcast"=dword:0 ; This should be MULTI_SZ, the IP address list "IpAddress"="192.xxx.y.abc" ; This should be MULTI_SZ, the subnet masks for the above IP addresses "Subnetmask"="255.255.255.0" ; @CESYSGEN ENDIF CE_MODULES_DHCP ENDIF BSP_NOETHER ! ; @CESYSGEN ENDIF CE_MODULES_NDIS In spite of this, the network is not working(ping fails with error code 11010).But IP address 192.xxx.y.abc is shown with ipconfig command. Please suggest me what shall i do? Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102457
  - 25
    - as for debugging mode. hello, everyone? I'm trying to use break point with some bsp under the following condition. - build option : SYSGEN_SHELL=1, IMGEBOOT=1, IMGCELOGENABLE=1, no IMGNODEBUGGER=1, no IMGNODEBGGER=1, no IMGNOKITL=1, IMGPROFILER=1. ( I checked the uppper 6 options at build option window and also add 'platform manager' catalog to my project. - build mode : Release mode Although there is no wrong with settings, the bsp can't use break point at PB. Is there any job to support the break point? Currently, the break point can be made but it can't be stopped at the break point. Tag: Has the DirectShow Ksproxy filter been supported in wince5.0??? Tag: 102455

The wince5.0 has not supported the video capture filter, so I want to use the
Ksproxy filter to camera capture implement .but I have not found it in ce5.0
helper.
So I want to know if the the DirectShow Ksproxy filter has been supported in
wince5.0.

Top

Re: Has the DirectShow Ksproxy filter been supported in wince5.0??? by Meir

Meir
Wed Jul 11 17:30:15 CDT 2007

Hi Paul.

The only capture filter available on Windows CE is the video capture filter;
it was released with PocketPC/Smartphone 2005 and windows CE 6.0. There is
no full support for KSProxy

Meir
This posting is provided "AS IS" with no warranties, and confers no rights.

"paul.he" <paul.he@discussions.microsoft.com> wrote in message
news:B708EA70-ADC8-4C22-A5B9-604389EDF6EE@microsoft.com...
> The wince5.0 has not supported the video capture filter, so I want to use
> the
> Ksproxy filter to camera capture implement .but I have not found it in
> ce5.0
> helper.
> So I want to know if the the DirectShow Ksproxy filter has been supported
> in
> wince5.0.

Top