Dialog apps for PocketPC in Platbuilder

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - osbench, windows CE 4.1 Hi all, I am using windows CE 4.1, and I ported the OS to an ARM9 based platform. I am facing a problem with the OSBENCH program. The program, gives me really crazy results. The results I got for the first test is copied below- ****************************************************************************** | 0.00 | IP = NO | CS = NO | 1 IPS ------------------------------------------------------------------- EnterCriticalSection traditional (blocking) with priority inversion : Time from a lower priority thread calling LeaveCS to a higher priority thread unblocking from the EnterCS call | Max Time = 4294823.666 us | Min Time = 1833.470 us | Avg Time = 111.586 us ****************************************************************************** As I understand, the problem is caused by OB_PrintResults routine in osbench.c The line which causes the trouble is the 'dwtime' calculation line. dwTime = (DWORD) (g_pBuffer->liPerf2[i].QuadPart - g_pBuffer->liPerf1[i].QuadPart); When the value computed is negative, (In the first test, the second value is always bigger than the first) it results in a typecast problem (DWORD is unsigned), and I get a big unsigned value as the result. Just to confirm that my basic routines are correct- the QueryperformanceCounter returns the no. of clockticks till the moment it is called, and QueryPerformanceFrequency returns the frequency of counter clock (which in my case is my Timer). So how can I get rid of this problem? I tried copying the entire stuff to my platform directory and rebuilding it. It works, but blocks at the first inter-process test (It works till Event-intra process. The next test is Event-inter process, and it blocks there. I tried swapping the tests and confirmed that blocking occurs at the inter-process tests). I have never modified any static libraries which is included by the build system. How can I modify the OSBENCH program? Or Am I in a completely wrong track. Please advice. Thank you, Mariam. PS: Attached below is my new results. If any of you have run it on an ARM platform, please let me know whether they are good enough for an ARM 922 processor running at 200MHz? ****************************************************************************** SYSTEM BUILD INFO PLATFORM = PROCESSOR = ARMV4I CONFIG = TEST2 RET/DEBUG = debug BUILD DATE = May 28 2004 @ (15:58:21) ------------------------------------------------------------------- PERFORMANCE COUNTER INFO Counter Frequency = 100000000 Hz Counter tick interval = 10 ns QPC() call overhead = 6.280 usecs ------------------------------------------------------------------- RUNTIME OPTIONS NUmber of samples per test = 5 =================================================================== ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ =================================================================== | 0.00 | IP = NO | CS = NO | 1 IPS ------------------------------------------------------------------- EnterCriticalSection traditional (blocking) with priority inversion :Time from a lower priority thread calling LeaveCS to a higher priority thread unblocking from the EnterCS call ------------------------------------------------------------------- | Max Time = 151.560 us | Min Time = 133.120 us | Avg Time = 138.685 us =================================================================== =================================================================== | 0.01 | IP = NO | CS = NO | 1 IPS ------------------------------------------------------------------- EnterCriticalSection traditional (blocking) without priority inversion :Time from a higher priority thread calling EnterCS (blocked) to a lower priority runnable thread getting run ------------------------------------------------------------------- | Max Time = 163.610 us | Min Time = 149.310 us | Avg Time = 155.230 us =================================================================== =================================================================== | 0.02 | IP = NO | CS = NO | 1000 IPS ------------------------------------------------------------------- EnterCriticalSection fastpath (uncontested) ------------------------------------------------------------------- | Subtracting out base result of -18242 ticks | Max Time = 0.000 us | Min Time = 0.000 us | Avg Time = 0.000 us =================================================================== =================================================================== | 0.03 | IP = NO | CS = NO | 1000 IPS ------------------------------------------------------------------- LeaveCriticalSection fastpath (uncontested) ------------------------------------------------------------------- | Subtracting out base result of -18322 ticks | Max Time = 0.000 us | Min Time = 0.000 us | Avg Time = 0.000 us =================================================================== =================================================================== | 0.00 | IP = NO | CS = YES | 1 IPS : ------------------------------------------------------------------- EnterCriticalSection traditional (blocking) with priority inversion :Time from a lower priority thread calling LeaveCS to a higher priority thread unblocking from the EnterCS call ------------------------------------------------------------------- | Max Time = 1796.270 us | Min Time = 175.940 us | Avg Time = 1388.557 us =================================================================== =================================================================== | 0.01 | IP = NO | CS = YES | 1 IPS ------------------------------------------------------------------- EnterCriticalSection traditional (blocking) without priority inversion :Time from a higher priority thread calling EnterCS (blocked) to a lower priority runnable thread getting run ------------------------------------------------------------------- | Max Time = 191.540 us | Min Time = 188.600 us | Avg Time = 189.397 us =================================================================== =================================================================== | 1.00 | IP = NO | CS = NO | 1 IPS ------------------------------------------------------------------- Semaphore signalling intra-process :Time from a lower priority thread calling ReleaseSemaphore to a higher priority thread in the same process unblocking from a WaitForSingleObject call ------------------------------------------------------------------- | Max Time = 127.340 us | Min Time = 115.590 us | Avg Time = 120.277 us =================================================================== ****************************************************************************** Tag: Dialog apps for PocketPC in Platbuilder Tag: 52710
  - 2
    - acessing local database with local asp and web server -how? (Windows ce .net 4.2) (headless device) I have a headless device project in Windows CE.NET 4.2 Platform Builder, and I put a web server with asp and isapi extensions The problem is: How can I make a local database and access it with asp pages running in the device? Is this possible, or do i need to write an ISAPI instead (that would be more painful) that wrapper to a local database for headless devices? Is there any way to do with sqlce? if its possible, how can i create a sqlce database and an asp page to deploy on the device Marcelo van Kampe Tag: Dialog apps for PocketPC in Platbuilder Tag: 52707
  - 3
    - QFEs for Emulator? When you install CE 4.2, you can select to install for a few different CPUs, "x86" and "Emulator" are two of them. When downloading QFEs however, I don't see a QFE option for "Emulator", only for "x86" (and all other CPUs of course). So my question is, how do I get QFE packages for the emulator? Here's the URL I downloaded QFEs for the other CPU types: http://www.microsoft.com/downloads/details.aspx? familyid=3e5316e3-7600-429f-8ac1- b72a91575e99&displaylang=en#filelist Tag: Dialog apps for PocketPC in Platbuilder Tag: 52705
  - 4
    - Taskbar will not show oppend windows I have red similar messages befor(appended to the end of this message) , but all suggestions, where given, didn't work for me My taskbar shows quick lanch icons and time, but doesn't show any programs I am running at the moment or Internet windows opend.If I minimize the window, it will dessapear at all and I will be able to get it back , only through Task Manager. If I remove quick lunch icons , taskbar will desapear at all, and I will not be able even to go to the Sart button.It doesn't help if I put my mouse coursor over the place , where the taskbar supposed to be , or if I change all the options. Also my taskbar is not on auto hide Subject: Re: missing opened windows icons on task bar 3/3/2004 1:55 PM PST By: <A HREF="mailto:user@#notme.com There should be a faint divider to the right of the start button on the taskbar. Hover the mouse over it, when the cursor becomes a horizontal double arrow, click the left mouse button and drag that divider to the right. As you do so, they should become visible If that doesn't work, try turning off quick launch and turning it back on. NOTE: doing so will require you to replace the shortcuts currently on the taskbar as they will no longer be there. Right click start, select properties, go to the taskbar tab, remove the check from "Show Quick Launch," click apply and ok, then replace the check next to "Show Quick Tag: Dialog apps for PocketPC in Platbuilder Tag: 52703
  - 5
    - Serial Networking and TAPI,TCP/IP Thank you all for taking a look at my post We have a modem connected to one of the serial ports. We don't have any other networking hardware (NIC etc.). We are using CE 4.2 OS. What are the major networking features that can be included in our project? Is it possible to include TCP/IP support, TAPI features? I guess in this case TCP/IP uses PPP over serial port. But before using PPP over serial, data connection has to be made using modem. Is this data connection made using TAPI and who makes this data connection (WinSock, TCP/IP or, PPP) Can we make a phone call using TAPI, while a TCP/IP socket is connected to a remote server in this scenario Regards Tag: Dialog apps for PocketPC in Platbuilder Tag: 52701
  - 6
    - Stub_LoadLibrary Failed with 0x0000000e Thank you all for taking a look at my post We are getting the following error during CE 4.2 bootup on a ARM based platform stub_LoadLibraryW (demodll): Failed with error 0x0000000 We have enough physical memory(128 MB) configured in config.bib and virtual memory also What are the possible causes and solutions for this error ? Regard arun Tag: Dialog apps for PocketPC in Platbuilder Tag: 52700
  - 7
    - Changing default selection in LoadCePC How do I change the default selection in the LoadCEPC bootloader? I want the local boot to be default. Do I need to recompile LoadCEPC.exe for that? Peter Tag: Dialog apps for PocketPC in Platbuilder Tag: 52691
  - 8
    - PB questions Hi. Two simple question: * When moving from an evaluation license of PB 4.2 to a true valid license, do I need to reinstall all the PB software or can the evaluation version be unlocked with the payed license code? * What exactly do I need from a platform to reproduce it on a different PC? Comparing with a normal WinCE application you normally need: .c, .cpp, .h, .vcp (.dsp), .rc files. Everything else can re genrated from these. What is true about a PB project (platform)? What are you version controlling in your platforms? Peter Tag: Dialog apps for PocketPC in Platbuilder Tag: 52690
  - 9
    - IME Candidate Windows Dear all Is that possible to remove candidate window from Chinese IME? We are trying to have a application to retrieve the list from candidate buffer Thanks Jay Tag: Dialog apps for PocketPC in Platbuilder Tag: 52689
  - 10
    - Convert PB 3.0 build to PB 4.2 build? Hello, I have a Windows CE 3.0 custom device based on the the StrongArm SA1110 processor. I have the BSP, OAL, and all custom drivers needed to build a CE 3.0 image and bootloader using PB 3.0. Note that we have never used the IDE of PB 3.0 we have always built from the command line with the PB 3.0 tools. I would like to move the BSP, OAL, and drivers to PB 4.0 and build a CE 4.2 image for this device, I believe I should be able to use the existing bootloader as is without having to rebuild or change it? I have looked at the PB 4.0 documentation and it does have a little porting help for doing this - but it is not clear to me the easiest approach to take. Can you guys help with what will probably be the easiest steps to do this? Thanks in advance! Neal Davis Tag: Dialog apps for PocketPC in Platbuilder Tag: 52680
  - 11
    - How to find address of OEMAddressTable? To Guru. How to find OEMAddressTable for Emulator and ARM? Best Regard. Tag: Dialog apps for PocketPC in Platbuilder Tag: 52649
  - 12
    - USB Driver not loading after a softreset Dear TechGurus Can any one pls bring to light what this problem is..... I am working on a USB Interface. I have a USB Device, the driver is installed properly when I connect my device for the first time. I am giving a soft reset without removing the device from the USB Port(meaning the device is plugged in when I give a soft-reset) After a soft reset the driver doesnt get loaded for the USB Device. If at all i am making a mistake in thedriver which exposable function in the DLL shuld i peep into. Is it XXX_Powerup My intention is that driver shuld get loaded soon after i give a soft reset Pls suggest/clarify Thanks a tonne Cheers Lakshman Tag: Dialog apps for PocketPC in Platbuilder Tag: 52645
  - 13
    - Image generation Guys when I download an image using platform builder into a VIA motherboard everything goes fine, but when I copy the generated nk.bin to the hard disk and boot directly using this image, the Vmini ethernet driver disappears!! does anyone can explain to me what is happening?? If the image is the same, how is that possible? thanks Rodrigo (a new developer) PS: iÂ´m using CE .NET 4. Tag: Dialog apps for PocketPC in Platbuilder Tag: 52642
  - 14
    - Download/Initialize problem with Platform Webpad tutorial I have followed the instructions to create the Web pad tutorial in Platform Builder 4.2. When I come to Download/Initialise the OS image to the Emulator, I get a problem. I get the Downloading OS Image dialog (saying waiting for Bootme blah blah), followed by the warning for KITL, which I accept using the Yes button. Then I get a Server Busy dialog followed by "Connection to Target failed" - "Platform builder was unable to connect to the target device" Any ideas what's going on here? I used all the default options when building the platform, and I can't even get it to run in the emulator! Thanks in advance Toby Tag: Dialog apps for PocketPC in Platbuilder Tag: 52639
  - 15
    - USB Floppy drive does not work Hi, I have Iomega Floppy drive, it works on Windows XP. But, unfortunately it does not work on WCE4.2. WCE USBdisk6 driver recognize it as bInterfaceSubClass = 0x04 : USB Floppy Interface (UFI) but it can not communicate with it, and always return an error: ERROR_GEN_FAILURE. There is no difference if floppy is inserted or not. Here is my registry settings and debug output. Thanks for any help, Dusko [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\USBFDProfile] "Name"="USB Floppy Disk Drive" "Folder"="Floppy Drive" "DefaultFileSystem"="FATFS" "PartitionDriver"="" [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\USBFDProfile\FATFS] "CacheSize"=dword:0 ; USB - SL811HS [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SL811HCD] "Prefix"="HCD" "Dll"="sl811hcd.dll" "Order"=dword:2 "UseExistingSettings"=dword:0 "DataBase"=dword:310 "MemOffset"=dword:10 ;offset to the data memory ; USB - HID driver [HKEY_LOCAL_MACHINE\Drivers\USB\LoadClients\Default\Default\3\Hid_Class] "DLL"="USBHID.DLL" "Prefix"="HID" "Order"=dword:2 "Index"=dword:1 [HKEY_LOCAL_MACHINE\Drivers\USB\ClientDrivers\Hid_Class] "DLL"="USBHID.DLL" "Prefix"="HID" [HKEY_LOCAL_MACHINE\Drivers\HID\LoadClients\Default\Default\1_2\Mouse] "DLL"="MOUHID.DLL" [HKEY_LOCAL_MACHINE\Drivers\HID\LoadClients\Default\1_6\Keyboard] "DLL"="KBDHID.DLL" [HKEY_LOCAL_MACHINE\Drivers\HID\ClientDrivers\Keyboard] "DLL"="KBDHID.DLL" "Prefix"="KBD" "IClass"="{CBE6DDF2-F5D4-4e16-9F61-4CCC0B6695F3}" [HKEY_LOCAL_MACHINE\Drivers\HID\LoadClients\Default\12_1\Consumer] "DLL"="CONSHID.DLL" ; USB - Storage device [HKEY_LOCAL_MACHINE\Drivers\USB\LoadClients\Default\Default\8\Mass_Storage_C lass] "DLL"="USBMSC.DLL" "Prefix"="DSK" [HKEY_LOCAL_MACHINE\Drivers\USB\ClientDrivers\Mass_Storage_Class] "DLL"="USBMSC.DLL" "Prefix"="DSK" ;please added following. "ReadSectorTimeout"=dword:400 "WriteSectorTimeout"=dword:400 "ScsiCommandTimeout"=dword:200 "MediaPollInterval"=dword:400 "UnitAttnRepeat"=dword:10 [HKEY_LOCAL_MACHINE\Drivers\USB\ClientDrivers\Mass_Storage_Class\2] "DLL"="USBDISK6.DLL" "Prefix"="DSK" "FSD"="UDFS.DLL" "Folder"="USB Disk" "IOCTL"=dword:4 "IClass"="{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" [HKEY_LOCAL_MACHINE\Drivers\USB\ClientDrivers\Mass_Storage_Class\6] "DLL"="USBDISK6.DLL" "Prefix"="DSK" "FSD"="FATFS.DLL" "Folder"="USB Disk" "IOCTL"=dword:4 "IClass"="{A4E7EDDA-E575-4252-9D6B-4195D48BB865}" ; USB - Printer [HKEY_LOCAL_MACHINE\Drivers\USB\LoadClients\Default\Default\7\Printer_Class] "DLL"="USBPRN.DLL" "Prefix"="LPT" [HKEY_LOCAL_MACHINE\Drivers\USB\ClientDrivers\Printer_Class] "DLL"="USBPRN.DLL" "Prefix"="LPT" "PortStatusTimeout"=dword:2000 "DeviceIdTimeout"=dword:2000 "SoftResetTimeout"=dword:2000 "ReadTimeoutMultiplier"=dword:10 "ReadTimeoutConstant"=dword:100 "WriteTimeoutMultiplier"=dword:50 "WriteTimeoutConstant"=dword:1000 SL811: PortStatusChangeThread-Before running HCD_AttachDevice g_portSpeed=0 USBDISK6>DiskAttach bInterfaceSubClass:0x4 ActivePath:Drivers\USB\ClientDrivers\Mass_Storage_Class\6 USBDISK6>DiscoverLuns USBDISK6>ScsiUnitAttention USBDISK6>ScsiTestUnitReady USBDISK6>ScsiGetSenseData USBDISK6>ScsiRequestSense USBDISK6<ScsiRequestSense:0 ScsiGetSenseData - SenseKey:0x6 ASC:0x29 ASCQ:0x0 SENSE_UNIT_ATTENTION : ASC_RESET USBDISK6<ScsiGetSenseData:20 ScsiTestUnitReady ERROR:20 USBDISK6<ScsiTestUnitReady:20 ScsiUnitAttention:20 USBDISK6>ScsiStartStopUnit USBDISK6>ScsiGetSenseData USBDISK6>ScsiRequestSense USBDISK6<ScsiRequestSense:31 ScsiGetSenseData error:31 USBDISK6<ScsiGetSenseData:31 ScsiStartStopUnit ERROR:31 USBDISK6<ScsiStartStopUnit:31 USBDISK6>ScsiGetSenseData USBDISK6>ScsiRequestSense USBDISK6<ScsiRequestSense:31 ScsiGetSenseData error:31 USBDISK6<ScsiGetSenseData:31 USBDISK6>ScsiTestUnitReady USBDISK6>ScsiGetSenseData USBDISK6>ScsiRequestSense USBDISK6<ScsiRequestSense:31 ScsiGetSenseData error:31 USBDISK6<ScsiGetSenseData:31 ScsiTestUnitReady ERROR:31 Tag: Dialog apps for PocketPC in Platbuilder Tag: 52636
  - 16
    - OSBENCH Hi all, I am using windows CE 4.1, and I ported the OS to an ARM9 based platform. I am facing a problem with the OSBENCH program. The program, gives me really crazy results. The results I got for the first test is copied below- ****************************************************************************** | 0.00 | IP = NO | CS = NO | 1 IPS ------------------------------------------------------------------- EnterCriticalSection traditional (blocking) with priority inversion : Time from a lower priority thread calling LeaveCS to a higher priority thread unblocking from the EnterCS call | Max Time = 4294823.666 us | Min Time = 1833.470 us | Avg Time = 111.586 us ****************************************************************************** As I understand, the problem is caused by OB_PrintResults routine in osbench.c The line which causes the trouble is the 'dwtime' calculation line. dwTime = (DWORD) (g_pBuffer->liPerf2[i].QuadPart - g_pBuffer->liPerf1[i].QuadPart); When the value computed is negative, (In the first test, the second value is always bigger than the first) it results in a typecast problem (DWORD is unsigned), and I get a big unsigned value as the result. Just to confirm that my basic routines are correct- the QueryperformanceCounter returns the no. of clockticks till the moment it is called, and QueryPerformanceFrequency returns the frequency of counter clock (which in my case is my Timer). So how can I get rid of this problem? I tried copying the entire stuff to my platform directory and rebuilding it. It works, but blocks at the first inter-process test (It works till Event-intra process. The next test is Event-inter process, and it blocks there. I tried swapping the tests and confirmed that blocking occurs at the inter-process tests). I have never modified any static libraries which is included by the build system. How can I modify the OSBENCH program? Or Am I in a completely wrong track. Please advice. Thank you, Mariam. PS: Attached below is my new results. If any of you have run it on an ARM platform, please let me know whether they are good enough for an ARM 922 processor running at 200MHz? ****************************************************************************** SYSTEM BUILD INFO PLATFORM = PROCESSOR = ARMV4I CONFIG = TEST2 RET/DEBUG = debug BUILD DATE = May 28 2004 @ (15:58:21) ------------------------------------------------------------------- PERFORMANCE COUNTER INFO Counter Frequency = 100000000 Hz Counter tick interval = 10 ns QPC() call overhead = 6.280 usecs ------------------------------------------------------------------- RUNTIME OPTIONS NUmber of samples per test = 5 =================================================================== ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ =================================================================== | 0.00 | IP = NO | CS = NO | 1 IPS ------------------------------------------------------------------- EnterCriticalSection traditional (blocking) with priority inversion :Time from a lower priority thread calling LeaveCS to a higher priority thread unblocking from the EnterCS call ------------------------------------------------------------------- | Max Time = 151.560 us | Min Time = 133.120 us | Avg Time = 138.685 us =================================================================== =================================================================== | 0.01 | IP = NO | CS = NO | 1 IPS ------------------------------------------------------------------- EnterCriticalSection traditional (blocking) without priority inversion :Time from a higher priority thread calling EnterCS (blocked) to a lower priority runnable thread getting run ------------------------------------------------------------------- | Max Time = 163.610 us | Min Time = 149.310 us | Avg Time = 155.230 us =================================================================== =================================================================== | 0.02 | IP = NO | CS = NO | 1000 IPS ------------------------------------------------------------------- EnterCriticalSection fastpath (uncontested) ------------------------------------------------------------------- | Subtracting out base result of -18242 ticks | Max Time = 0.000 us | Min Time = 0.000 us | Avg Time = 0.000 us =================================================================== =================================================================== | 0.03 | IP = NO | CS = NO | 1000 IPS ------------------------------------------------------------------- LeaveCriticalSection fastpath (uncontested) ------------------------------------------------------------------- | Subtracting out base result of -18322 ticks | Max Time = 0.000 us | Min Time = 0.000 us | Avg Time = 0.000 us =================================================================== =================================================================== | 0.00 | IP = NO | CS = YES | 1 IPS : ------------------------------------------------------------------- EnterCriticalSection traditional (blocking) with priority inversion :Time from a lower priority thread calling LeaveCS to a higher priority thread unblocking from the EnterCS call ------------------------------------------------------------------- | Max Time = 1796.270 us | Min Time = 175.940 us | Avg Time = 1388.557 us =================================================================== =================================================================== | 0.01 | IP = NO | CS = YES | 1 IPS ------------------------------------------------------------------- EnterCriticalSection traditional (blocking) without priority inversion :Time from a higher priority thread calling EnterCS (blocked) to a lower priority runnable thread getting run ------------------------------------------------------------------- | Max Time = 191.540 us | Min Time = 188.600 us | Avg Time = 189.397 us =================================================================== =================================================================== | 1.00 | IP = NO | CS = NO | 1 IPS ------------------------------------------------------------------- Semaphore signalling intra-process :Time from a lower priority thread calling ReleaseSemaphore to a higher priority thread in the same process unblocking from a WaitForSingleObject call ------------------------------------------------------------------- | Max Time = 127.340 us | Min Time = 115.590 us | Avg Time = 120.277 us =================================================================== ****************************************************************************** Tag: Dialog apps for PocketPC in Platbuilder Tag: 52634
  - 17
    - Concept fussing~ I'm newbie.... and i'm so confused after looking through the docs, would anyone please clarify these two concept.....thanks~ SDB operates the specified board and is built with in Eboot~. and, with eboot.bin provided ,we need not to concern the low level drivers any more. BSP mainly differents in processors. so in different boards but with the same processor, we could built up OS with uniform BSP shipped with PB, and add corresponding drivers within the image then the board would operate well. appreciate again~:) Tag: Dialog apps for PocketPC in Platbuilder Tag: 52633
  - 18
    - Windows CE 4.2(Eval) Debug Check failed kbdhid.cpp at line 1122 Hi All, I am porting Windows CE 4.0 (Hitachi SH7727 PFM_DS11 platform) USB OHCI driver to Windows CE 4.2. I am facing following problem in keyboard HID driver. 4294818975 PID:6df46f22 TID:8de9baa6 0x8de94900: KbdHid: DEBUGCHK failed in file d:\mckendric\public\common\oak\drivers\usb\class\hid\clients\kbdhid\kbdhid.cpp at line 1122. Windows CE 4.2 (kbdhid.cpp) Source (where I get DEBUGCHK fail) ... DWORD dwIdx; const VKeyToShiftState *pvkshiftCurr; DEBUGCHK(pKeyStateFlags != NULL); >>> DEBUGCHK(vk != 0); <<< Line 1122 kbdhid.cpp for (dwIdx = 0; dwIdx < dim(rgVKeyDownToShiftState); ++dwIdx) { pvkshiftCurr = &rgVKeyDownToShiftState[dwIdx]; if (pvkshiftCurr->vk == vk) { if (hidpKeyEvent == HidP_Keyboard_Make) { *pKeyStateFlags |= pvkshiftCurr->ksf; } else { *pKeyStateFlags &= ~pvkshiftCurr->ksf; } break; here are the debug message I am getting which shows All the drivers except Client HID driver loading fails. 4294769084 PID:6df46f22 TID:6df5bfae 0x8df40580: >>> Loading module ohci.dll at address 0x037B0000-0x037D7000 (RW data at 0x01F85000-0x01F85880) Loaded symbols for 'D:\WINCE420\PUBLIC\MYSH7727\RELDIR\PFM_DS11-SH3DEBUG\OHCI.DLL' 4294769112 PID:6df46f22 TID:6df5bfae 0x8df40580: >>> Loading module usbd.dll at address 0x03B50000-0x03B5E000 (RW data at 0x01FBD000-0x01FBD5BC) Loaded symbols for 'D:\WINCE420\PUBLIC\MYSH7727\RELDIR\PFM_DS11-SH3DEBUG\USBD.DLL' 4294769112 PID:6df46f22 TID:6df5bfae 0x8df40580: USBD: DLL attach 4294769114 PID:6df46f22 TID:6df5bfae 0x8df40580: +USBD:HcdAttach, hcd: 0x321C0 4294769785 PID:6df46f22 TID:edea8606 0x8dea8000: >>> Loading module hidparse.dll at address 0x03B30000-0x03B40000 (RW data at 0x01FB9000-0x01FB9474) Loaded symbols for 'D:\WINCE420\PUBLIC\MYSH7727\RELDIR\PFM_DS11-SH3DEBUG\HIDPARSE.DLL' 4294769786 PID:6df46f22 TID:edea8606 0x8dea8000: >>> Loading module usbhid.dll at address 0x03B40000-0x03B50000 (RW data at 0x01FBB000-0x01FBB548) Loaded symbols for 'D:\WINCE420\PUBLIC\MYSH7727\RELDIR\PFM_DS11-SH3DEBUG\USBHID.DLL' 4294769789 PID:6df46f22 TID:edea8606 0x8dea8000: DEVICE!ActivateDeviceEx(Drivers\USB\ClientDrivers\Hid_Class) entered 4294769793 PID:6df46f22 TID:edea8606 0x8dea8000: PNP interface class {f8a6ba98-087a-43ac-a9d8-b7f13c5bae31} (HID1:) ATTACH 4294769794 PID:6df46f22 TID:edea8606 0x8dea8000: +USBD:OpenPipe, EP: 129, MaxPkt: 8, Type: Interrupt 4294769795 PID:6df46f22 TID:edea8606 0x8dea8000: -USBD:OpenPipe success, hPipe = 3ADD0 4294769800 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Preparing to Allocate memory 4294769801 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Top Level Collection 1 found 4294769801 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Collection 1 exit 4294769802 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Starting Parsing Pass 4294769802 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Parse Collection 1 4294769803 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Main Offset:8 4294769803 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Main Offset:10 4294769804 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Out offset:8 4294769804 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Out offset:b 4294769805 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Main Offset:18 4294769806 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'X Parse Collection 1 Loaded symbols for 'D:\WINCE420\PUBLIC\MYSH7727\RELDIR\PFM_DS11-SH3DEBUG\KBDHID.DLL' 4294770071 PID:6df46f22 TID:edea8606 0x8dea8000: >>> Loading module kbdhid.dll at address 0x03B20000-0x03B28000 (RW data at 0x01FB7000-0x01FB74DF) 4294771086 PID:6df46f22 TID:edea8606 0x8dea8000: DEVICE!ActivateDeviceEx(Drivers\HID\ClientDrivers\Keyboard) entered 4294771091 PID:6df46f22 TID:edea8606 0x8dea8000: PNP interface class {CBE6DDF2-F5D4-4e16-9F61-4CCC0B6695F3} (KBD1:) ATTACH 4294771352 PID:6df46f22 TID:edea8606 0x8dea8000: +USBD:OpenPipe, EP: 130, MaxPkt: 8, Type: Interrupt 4294771353 PID:6df46f22 TID:edea8606 0x8dea8000: -USBD:OpenPipe success, hPipe = 3B6A0 4294770095 PID:4dec284a TID:4df5bd8a 0x8dec28b8: Created 16 Bpp bitfield-palette, handle = 0x0000000c 4294771356 PID:4dec284a TID:4df5bd8a 0x8dec28b8: Bits-per-pixel: 16 4294771363 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Preparing to Allocate memory 4294771363 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Top Level Collection 1 found 4294771364 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Enter Link Collection 4294771364 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Exit Link Collection 4294771365 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Collection 1 exit 4294771365 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Top Level Collection 2 found 4294771365 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Collection 2 exit 4294771366 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Top Level Collection 3 found 4294771366 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Collection 3 exit 4294771370 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Starting Parsing Pass 4294771371 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Parse Collection 1 4294771372 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Main Offset:8 4294771373 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Main Offset:b 4294771374 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Main Offset:10 4294771376 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'X Parse Collection 1 4294771377 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Parse Collection 2 4294771378 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Main Offset:8 4294771379 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Main Offset:b 4294771380 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'X Parse Collection 2 4294771381 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Parse Collection 3 4294771382 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'Main Offset:8 4294771384 PID:6df46f22 TID:edea8606 0x8dea8000: HidParse: 'X Parse Collection 3 4294771467 PID:6df46f22 TID:adf13f72 0x8df10400: NDIS: -ProcessPcmciaDeviceNotificationMessages 4294771406 PID:6df46f22 TID:edea8606 0x8dea8000: FindClientRegKey: Could not find a suitable HID client driver 4294772665 PID:6df46f22 TID:edea8606 0x8dea8000: FindClientRegKey: Could not find a suitable HID client driver Now whenever I press any key on USB keyboard I get following DEBUG CCHK failed message. 4294818975 PID:6df46f22 TID:8de9baa6 0x8de94900: KbdHid: DEBUGCHK failed in file d:\mckendric\public\common\oak\drivers\usb\class\hid\clients\kbdhid\kbdhid.cpp at line 1122 4294818981 PID:6df46f22 TID:8de9baa6 0x8de94900: KbdHid: DEBUGCHK failed in file d:\mckendric\public\common\oak\drivers\usb\class\hid\clients\kbdhid\kbdhid.cpp at line 1122 4294818986 PID:6df46f22 TID:8de9baa6 0x8de94900: KbdHid: DEBUGCHK failed in file d:\mckendric\public\common\oak\drivers\usb\class\hid\clients\kbdhid\kbdhid.cpp at line 1122 4294818992 PID:6df46f22 TID:8de9baa6 0x8de94900: KbdHid: DEBUGCHK failed in file d:\mckendric\public\common\oak\drivers\usb\class\hid\clients\kbdhid\kbdhid.cpp at line 1122 All the registry setting which are in common.reg I have kept as it is. Am I missing something ? Is anything wrong with my OHCI driver ? Thanks in advance. Rajesh Tag: Dialog apps for PocketPC in Platbuilder Tag: 52631
  - 19
    - Repace the Traditional Chinese font Dear all, I am trying to replace the Traditional Chinese font in CE4.2 PXA255 platform. I followed the instruction of the online help by the below steps: 1.included the ttf file under \\windows directory 2. modified the below registry . enable font link . indicate ttf file location ********************************************************** [HKEY_LOCAL_MACHINE\SYSTEM\GDI] "FontLinkMethods"=dword:1 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FontLink\SystemLink } "Tahoma"="\\Windows\\mingliu.ttc,PMingLiU" --> "\\Windows\dftc.ttf" "Courier New"="\\Windows\\mingliu.ttc,PMingLiU" --> "\\Windows\dftc.ttf" "Arial"="\\Windows\\mingliu.ttc,PMingLiU" --> "\\Windows\dftc.ttf" "Times New Roman"="\\Windows\\mingliu.ttc,PMingLiU" --> "\\Windows\dftc.ttf" "Symbol"="\\Windows\\mingliu.ttc,PMingLiU" --> "\\Windows\dftc.ttf" ********************************************************** However, once done, all chinese characters turn to □ symbol. Am I missing something? Now I used another way instead that modifing the bib file to change the tahoma font source file to the new font. It works. However, it will lose choice to pick up different fonts for English and Chinese separately, because there is only one font in the system now. Thanks, Jay Tag: Dialog apps for PocketPC in Platbuilder Tag: 52616
  - 20
    - how to set 64M memory in PB hey, I use pb4.2 builder a thin client of 64M sdram. but i can see system is see 32M. i set the autosize=on but cant. what can i do? thanks. Tag: Dialog apps for PocketPC in Platbuilder Tag: 52615
  - 21
    - Downloading Applications Only I Have been developing a WinCE image w/ an application. I currently download the whole thing w/ Platform Builder & run it. I am now flashing the WinCE image, but I want to download just the application and run & debug it. How do I do just that? Tag: Dialog apps for PocketPC in Platbuilder Tag: 52611
  - 22
    - Remote debug session hangs app My group is getting started on app development for the system I've put together in CE 4.2. We've encountered a hang condition that seems to be caused by running the app through a debugger. By tracing into the OS, I tracked down the hang into a call to OutputDebugString(). The OS notifies the debugger that the output buffer has a new string, then waits infinitely for the debugger to respond with a continue event. (See the WaitForDebugEvent() function group for reference.) We're using the provided driver for a RTL8139 NIC. This happens with both KITL and TCP/IP debug connections. Is this a known problem? Is there something I can do about it? -EN Tag: Dialog apps for PocketPC in Platbuilder Tag: 52607
  - 23
    - Help me to understand the limitations in the MS Atapi driver (CF) I've put a few posts on here now, I'm struggling somewhat with the MS Atapi driver when using a CF card on an IDE port. I've looked at a 3rd party atapi driver and also the driver within CE 5.0, both of which are a good improvement, certainly when reading or writing large files. However during a phase of our application it is writing to a lot of small files and the performance at this time is very very poor, no matter which driver we are using. To determine my best course of action from here I need to understand where it is that the problem actually lies. Within our application we are; Writing to 19 files totaling 4 KBytes in size, writing 3 files totaling 226 KBytes and writing a small amount of data (less than 100 Bytes) to 3 x 150 KByte files using file seeks to get to the relevant data positions. I haven't actually timed it but this whole process is taking well in excess of 10 seconds, could be as long as 20. Ouch!!!! So what bit of it is it that it is causing the problem? Is it the opening and closing of the files? If we left the files open would this improve matters? Is it the writing to different files, if we developed somesort of virtual file system within our app that meant that all the file data was written to one big file instead of seperate files would this likely help? I thought about developing a cache within our app itself, so that data is written to the cache but changes actually written to disk in the background using a thread. The trouble with this is with write speed being as slow as it appears to be, the possible loss of data due to power failure would seem immense. I'm also considering learning how to write an Atapi driver and then ripping to bits the MS one hopefully leaving only what we actually need. In a lighter form dedicated to our own use are we likely to see a signifigant enough improvement in performance? Is the performance problems within Atapi.dll? Or does it go further up the chain? My apologies if this post seems a tad 'rambly', I've expended a great deal of time and energy on getting this project off the ground and we have found ourselves completely stuck on one minor(ish) issue for sometime now. There is a little frustration begining to show through the cracks. All suggestions would be very greatfully appreciated. Col PS. Congrats on CE 5.0, we've built an image using it and have seen some good improvements. Particulalry pleased with the new BIOS boot loader, which has already been 'pinched' for our CE4.2 project :) Tag: Dialog apps for PocketPC in Platbuilder Tag: 52606
  - 24
    - CE image load checks? I am curious what, if any, checks CE start up and or bootloader code does to insure the OS image is not corrupted? CRC etc?. It looks like the bootloader just checks the TOC signature "CECE" after image is moved to RAM. Is there anything else done on kernel/bootload startup? Tag: Dialog apps for PocketPC in Platbuilder Tag: 52602
  - 25
    - USB key disk not detected We received a batch of USB keys and some work with our CE 4.2 Geode platform while others do not. The ones that fail all have the same type of chip (Create i5062). So I'm guessing there is some sort of incompatibility with that USB key. When the USB key is plugged into our platform, the debug messages that show up are attached below. These USB keys function just fine on other Windows and Linux boxes about the office, so I know they aren't just broken. Any suggestions on getting these to work? Thanks in advance -Rich 4294809244 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: CHub(Root tier 0)::AttachDevice - status = DEVICE_CONFIG_STATUS_SIGNAL_NEW_DEVICE_ENTER_OPERATIONAL_STATE, failures = 0 4294809255 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: >>> Loading module usbmsc.dll at address 0x03920000-0x0392D000 (RW data at 0x01F90000-0x01F904E0) Loaded symbols for 'W:\WINCE420\PUBLIC\SPC\RELDIR\NATIONAL_GEODE_X86DEBUG\USBMSC.DLL' 4294809304 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: +USBD:OpenPipe, EP: 129, MaxPkt: 64, Type: Bulk 4294809305 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: -USBD:OpenPipe success, hPipe = 57980 4294809305 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: +USBD:OpenPipe, EP: 2, MaxPkt: 64, Type: Bulk 4294809306 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: -USBD:OpenPipe success, hPipe = 57AA0 4294809314 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: >>> Loading module usbdisk6.dll at address 0x03910000-0x0391F000 (RW data at 0x01F8E000-0x01F8E524) Loaded symbols for 'W:\WINCE420\PUBLIC\SPC\RELDIR\NATIONAL_GEODE_X86DEBUG\USBDISK6.DLL' 4294809373 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: Command Block Status: Command Failed 4294809383 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: ScsiGetSenseData - SenseKey:0x6 ASC:0x28 ASCQ:0x0 4294809383 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: SENSE_UNIT_ATTENTION : ASC_MEDIA_CHANGED 4294809384 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: ScsiTestUnitReady ERROR:20 4294809385 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: ScsiUnitAttention:20 4294809480 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: DEVICE!ActivateDeviceEx(Drivers\USB\ClientDrivers\Mass_Storage_Class\6) entered 4294809510 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: BOT_DataTransfer warning(6.7.2.3, RequestLength:512 TransferLength:8 Err:0 UsbErr:0x0, dwTimeout:5000) 4294809514 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: BOT_DataTransfer warning(6.7.2.3, RequestLength:504 TransferLength:13 Err:0 UsbErr:0x0, dwTimeout:4997) 4294814511 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: BOT_DataTransfer warning(6.7.2.3, RequestLength:491 TransferLength:0 Err:1460 UsbErr:0x0, wTimeout:4993) 4294818515 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: BOT_DataTransfer error(5.3.3, dwCswErr:1460, dwUsbErr:0x0, dwTimeout:4000) 4294822524 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: BOT_DataTransfer error(5.3.3, dwCswErr:1460, dwUsbErr:0x0, dwTimeout:4000) 4294822528 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: BOT_DataTransfer error(5.3.3, ResetErr:0x0 StallCount:2) 4294826532 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: Retry BOT_MassStorageReset 4294834544 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: BOT_DataTransfer error(5.3.1, 1460, 0x0, 0, 31, 4000) 4294838548 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: Retry BOT_MassStorageReset 4294842558 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: ScsiGetSenseData error:1460 4294842558 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: ScsiModeSense ERROR:1460 4294846562 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: BOT_DataTransfer error(5.3.1, 1460, 0x0, 0, 31, 4000) 4294850566 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: Retry BOT_MassStorageReset 4294858580 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: BOT_DataTransfer error(5.3.1, 1460, 0x0, 0, 31, 4000) 4294862584 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: Retry BOT_MassStorageReset 4294866595 PID:43fafbfa TID:c3ea9fa6 0x83ea7800: ScsiGetSenseData error:1460 Tag: Dialog apps for PocketPC in Platbuilder Tag: 52599
- Next
  - 1
    - gperotate library support for 4 BPP Hi, We are involved in developing audio conferencing solution with x86 based platform and Windows CE 4.2. I need clarification on gperotate libraries limitations. We are using emulation library to do blt and line drawing and our hardware Display interface is 320 x 240 x 4BPP LCD panel driven by Media Q PCI chipset. Question: Is that possible to use gperotate library to do rotation for 4 BPP configuration? Jegan Tag: Dialog apps for PocketPC in Platbuilder Tag: 52597
  - 2
    - Flash OS imageupdate application Hi all, I would like to write an application to update the whole OS image. I would the final user can run the application, choose a new OS image file from a mass storage (USB key) and then launch the update. At the end they must turn off and on the device. Can I use the bootpart library to reprogram the flash? I have to parse the .bin file or can I use the .nb0? I'm working with WINCE.NET - PB 4.2 and my platform is a pxa255 processor board with 32M NOR flash and 64M sdram. My image is non-XIP. I have reghive registry and a persistent flash partition. I need a lot of tips! Thanks in advance. FabioMelandri ElettronicaGF Tag: Dialog apps for PocketPC in Platbuilder Tag: 52594
  - 3
    - How is RAS suppose to handle multiple devices with the same name? Hi All, I have discovered an issue with RAS and connmc (Network and Connection Manager). I am testing a USB to serial dongle on my device. If I connect multiple dongles to my device using a USB hub I will have multiple RAS devices (RasEnumDevices), all using the same name. How can I differentiate between them? Whenever I try to create a connection (in connmc) it only uses the name, which is the same for all of them. How can RAS tell them apart? It seems to me, whatever entry I choose, the last one always gets used. This is a major problem. This must have been noticed before by someone. Any tips on how I can solve or work around this issue? Cheers Danny Tag: Dialog apps for PocketPC in Platbuilder Tag: 52591
  - 4
    - Problem with eboog I have found my date on my computer is 2003,and I have changed it to 2004. but the same problem still appears. No Server Process Associated With File Name bg Error in TFtpReceiver ****** Data record 52 corrupted, ABORT!!! ****** how can i resolve it ?? Tag: Dialog apps for PocketPC in Platbuilder Tag: 52590
  - 5
    - WDM for PPC Hi, This Is TZ. Is possible WDM for PPC..? And if possible.. How to use this..? Plz answer to me ^^ Tag: Dialog apps for PocketPC in Platbuilder Tag: 52587
  - 6
    - Launch application that it isn't in the image I need to launch and application that it is in the hard drive (compact flash) not in the image. Any idea ? Tag: Dialog apps for PocketPC in Platbuilder Tag: 52578
  - 7
    - SDK exported from PB and used in EVC Hello all, i created (in PB 4.2) a nk.bin OS image to be used on my hardware. I specifically added the SAPI module to let the computer speak in behalf of me! Im lazy :P I also generated the SDK, and installed onto my WinXP machine (im not so lazy). Now Im compiling my speech application using EVC 4.0 and i'm getting the usual error that says that the file "sphelper.h" cannot be found. Indeed in the SDK i just created that file does NOT exist. But i searched more and i found that file IS in the following directory: C:\WINCE420\PUBLIC\SPEECH\SDK\INC Now what i'm missing here? How to incorporate the libs/includes for the speech system into EVC in the ordinary manner? I simply added the right path to EVC to those libs/include directory and i got my app compiled&working, but i would like to do the right thingys instead of my own hacks. Greetings, Luca Tag: Dialog apps for PocketPC in Platbuilder Tag: 52575
  - 8
    - How to reconfigure image without BSPs? Greetings everybody and thanks for taking a look at my topic:0 my device is PXA255-400 based Sitsang board with 640*480 resolution, the os is wince.net 4.2. Intel provided us a nk.bin, but no BSPs is shipped along, How could i do the modifications since there is no BSP? The applications are not so complete and the drivers are running sluggish. So , i 'm wondering if i can duplicate out the files in image BIN, through sync cable while the board is running~ and do some replacement and adds, then rebuilt them into a whole~ I know, this might be a naive newbie idea, just want a verification of my idea and some suggestions to my situation..... If, my method debacle at all, what should i do to continue my project? Create BSPs? would it be easy in limited time , say, one month? I do appreciate you so much to end up with my awkward description, expect your recommonation:)) Tag: Dialog apps for PocketPC in Platbuilder Tag: 52571
  - 9
    - audio driver cause problem This is a multi-part message in MIME format. ------=_NextPart_000_0015_01C44401.E771D6B0 Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: quoted-printable Hi,all: =20 In PB4.1Net,if I removerd the audio driver from the BSP,the OS can = run smoothly,but if I added the audio driver into the BSP,the OS can't = work.why?who konw the reason would be? ------=_NextPart_000_0015_01C44401.E771D6B0 Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; charset=3Dgb2312"> <META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT size=3D2>Hi,all:</FONT></DIV> <DIV><FONT size=3D2>   </FONT></DIV> <DIV><FONT size=3D2>   In PB4.1Net,if I removerd the audio = driver from=20 the BSP,the OS can run smoothly,but if I added the audio driver into the = BSP,the=20 OS can't work.why?who konw the reason would = be?</FONT></DIV></BODY></HTML> ------=_NextPart_000_0015_01C44401.E771D6B0-- Tag: Dialog apps for PocketPC in Platbuilder Tag: 52570
  - 10
    - Customize Touch Calibration Hi I would like to write an application with the integrated touch calibration feature instead of customizing "calibrui" or calling "TouchCalibrate()". Is it possible that I can directly call the TouchXXX() APIs exported from touch.dll? I tried it but it didn't work. It seems related to process address space problem because my application will have another set of the global variables for the touch.dll instead of the touch driver's own copy Is there a way to solve it? Tag: Dialog apps for PocketPC in Platbuilder Tag: 52569
  - 11
    - Can Flash Image print message to HyperTerminal when OS running This is a multi-part message in MIME format. ------=_NextPart_000_000A_01C443FF.CB63BFD0 Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: quoted-printable If can do,how to do? Thank you! ------=_NextPart_000_000A_01C443FF.CB63BFD0 Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; charset=3Dgb2312"> <META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT size=3D2>If can do,how to do?</FONT></DIV> <DIV><FONT size=3D2>Thank you!</FONT></DIV></BODY></HTML> ------=_NextPart_000_000A_01C443FF.CB63BFD0-- Tag: Dialog apps for PocketPC in Platbuilder Tag: 52568
  - 12
    - Automatic App Execution after a soft reset Dear TechGurus I want an application to run soon after a soft-reset is given to a PDA Can any registry entries be set so that this happens. In the case of Win2k there is key in Registry under Microsoft called "RunOnce". When a entry is present there, soon after a restart the app path given in the registry starts executing. Similarly is there any registry paths in WInCE where an application would start executing after a soft-reset Thanks a tonne Cheers Lakshma Tag: Dialog apps for PocketPC in Platbuilder Tag: 52565
  - 13
    - Question About the interrupt of Pocket PC 2003 I am migrating PCMCIA & CF card device driver from Pocket PC 2002 to Pocket PC 2003 using Platform Builder 4.2. But the ISR is not called, when hardware interrupt is generated. I'm sure that the hardware has generated the interrupt. And this device driver works well in Pocket PC 2002. CardRequestIRQ return CERR_SUCCESS, however isr was not called. What is changed in the Pocket PC 2003 ? And, What is mean "NoIntrPend=dword:1" ? Is this only solution? Tag: Dialog apps for PocketPC in Platbuilder Tag: 52564
  - 14
    - makeimg: FATAL ERROR: Hi All I am trying to build french an spanish language from command line using platform builder 4.2. If i build english version from command line it builds fine. If i try to build spanish or french language i get the following error makeimg: FATAL ERROR: Must set a supported 4-digit locale code makeimg: FATAL ERROR: Must set a supported 4-digit locale code I had verified that LOCALE variable is still defined correct Need help Tag: Dialog apps for PocketPC in Platbuilder Tag: 52562
  - 15
    - Kitl connection doesn't.. Hello all. I have a headless SH4 platform, and am attempting to get CE4.2 running on it. The hardware is brand new, so it could be a hardware problem of sorts. Basically, I get to a point in the debug where everything just stops. Don't get error messages at all and looking into the device with an ice it appears to still be running (it does not appear to totally step into the weeds). The following is the last portion of my debug dump. What would be a good place for me to look into? I am not positive on how the interrupts are tied from the 91c111 to the processor, but I don't think it is using interrupts at this point yet (they appear to be enabled later in the game) Appreciate any help. Regards, Remco /// debug dump from serial port Host connected Host IP: 165.88.81.123, port 2588 KeyIndex 0 = -1 KeyIndex 1 = -1 KeyIndex 2 = -1 KeyIndex 3 = -1 KeyIndex 4 = -1 KeyIndex 5 = -4194305 KeyIndex 6 = -4194305 KeyIndex 7 = -1 +KITLRegisterDfltClient, service:0 +KITLRegisterDfltClient, service:1 KITLGlobalState == 0x61 KITL Initialized Waiting for service 'DBGMSG' to connect..., fUseSysCalls = 0 ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service PPSH ProcessAdminMsg: Receive Config message for service DBGMSG SH3Init done. //// ethernet debug on platform builder My PC's debug shows: <only latter part shown> 0 PID:0 TID:0 IntrPrio[109] = 00000001 0 PID:0 TID:0 IntrPrio[110] = 00000001 0 PID:0 TID:0 IntrPrio[111] = 00000001 0 PID:0 TID:0 DMAUCR = 0x00020000 0 PID:0 TID:0 PHCR (before)= 0x003c 0 PID:0 TID:0 PHCR (after) = 0x0000 0 PID:0 TID:0 Booting Windows CE version 4.20 for (SH-4) 0 PID:0 TID:0 &pTOC = 8c057680, pTOC = 8d483ad4, pTOC->ulRamFree = 8d4bd000, MemForPT = 00000000 0 PID:0 TID:0 Old or invalid version stamp in kernel structures - starting clean! 0 PID:0 TID:0 Configuring: Primary pages: 11071, Secondary pages: 0, Filesystem pages = 5535 0 PID:0 TID:0 Booting kernel with clean memory configuration: 0 PID:0 TID:0 Memory Sections: 0 PID:0 TID:0 [0] : start: 8d4be000, extension: 00003000, length: 02b3f000 1 PID:0 TID:0 Windows CE KernelInit Tag: Dialog apps for PocketPC in Platbuilder Tag: 52551
  - 16
    - Porting English application to Chinese Hello all. I have a custom XScale board and WinCE 4.1 in a kiosk application. Basically, dialogs are displayed listing options and the user presses buttons to make selections. Right now, my interface is in USA English. I have been asked what it would take to support Chinese. Man, I don't even know where to begin! Can someone point me at any resources I can study - something like "programming a Chinese GUI for dummies"? Are there any books or articles about migrating an application from English to Chinese? Any help would be appreciated, Matt Tag: Dialog apps for PocketPC in Platbuilder Tag: 52547
  - 17
    - BIOS boot loader splash screen, invalid image Can anyone help resolve a problem with a BIOS boot loader? I am trying to display a splash screen from a BIOS boot loader (BLDR) on a Geode based SBC running Windows CE .NET (4.2). I have explored the posts in the newsgroup on microsoft.public.windowsce.platformbuilder. In a post dated 8/21/2003 (see URL below) code to perform this task was graciously provided. I have added the code to main.c and verified the statup.asm (x86 based SBC) initalizes the video. The BLDR builds with no errors or warnings. The BLDR is then transfered to a Compact Flash card using MKDISK and the CE .NET OS is copied to the CF card I converted a BMP file to a raw image file (as suggested by a previous post) with a simple convetor (bmp2raw.exe) found on the internet. When the SBC is powered on the system boots properly, except no image is displayed when the BLDR is executing. The system was powered down and I then modifed main.c by changing SPLASH.IMG to SPLASH.BMP. A new BLDR file was built and flashed to the CF card. The SPLASH.BMP file was also added to the CF card. When the system boots two lines across the top of the screen display multi-colored pixels until the OS starts, indicating to me that an image is attempting to load but is in the wrong format I think I am close to making this work but can't get the image converted correctly. Any help is greatly appreciated URL for previous post containing BLDR code http://groups.google.de/groups?hl=de&lr=&ie=UTF-8&oe=UTF-8&threadm=044b01c3599e%24f1295af0%24a401280a%40phx.gbl&rnum=2&prev=/groups%3Fq%3DErik%2Bboot%2Bsplash%2Bgroup:microsoft.public.windowsce.platbuilder.*%26hl%3Dde%26lr%3D%26ie%3DUTF-8%26oe%3DUTF-8%26group%3Dmicrosoft.public.windowsce.platbuilder.*%26selm%3D044b01c3599e%2524f1295af0%2524a401280a%2540phx.gbl%26rnum%3D2 Tag: Dialog apps for PocketPC in Platbuilder Tag: 52546
  - 18
    - IE 6 context menu Hi All, Does any one know how to make change to the Context menu for the Vertical Scroll bar in IE6. It displays wrong items. It displays the following: Scroll Here --> This is correct Left Edge --> It should read "Top Edge" Right Edge --> It should read "Bottom Edge" Page Left --> It should read "Page Up" Page Right --> It should read "Page Down" Scroll Left --> It should read "Scroll Up" Scroll Right --> It should read "Scroll Down" Thanks Tag: Dialog apps for PocketPC in Platbuilder Tag: 52543
  - 19
    - Hard disk problem I've got a problem with my hard disk. I tried the procedure found in MSDN. I added the driver as explained, but it's not working. Does anybody have a link to a walkthrougth or a website. Thanks Jeff Burroughs Autolog Tag: Dialog apps for PocketPC in Platbuilder Tag: 52535
  - 20
    - Boot fails !!! Hi everybody, my CPU card, based on the Lubbock platform, boot since the data are sent to the display hardware (B&W LCD) and seem to wait something without crash. The debug output is (sorry for the listing) : Kernel debugger is waiting to connect with target. 0 PID:0 TID:0 Booting Windows CE version 4.20 for (ARM) 0 PID:0 TID:0 &pTOC = 800c245c, pTOC = 811d5380, pTOC->ulRamFree = 81222000, MemForPT = 00000000 0 PID:0 TID:0 Old or invalid version stamp in kernel structures - starting clean! 0 PID:0 TID:0 Configuring: Primary pages: 10898, Secondary pages: 0, Filesystem pages = 5449 0 PID:0 TID:0 Booting kernel with clean memory configuration: 0 PID:0 TID:0 Memory Sections: 0 PID:0 TID:0 [0] : start: 81223000, extension: 00003000, length: 02a92000 0 PID:0 TID:0 Sp=ffffc7cc 2 PID:0 TID:0 Windows CE KernelInit 4294767296 PID:3cb7002 TID:3cb7262 Updated eptr->e32_vsize to = 000b6000 4294767309 PID:3cb7002 TID:3cb7262 Scheduling the first thread. 4294767321 PID:3cb7002 TID:3cb7262 0x83cb7024: KernelInit2: pCurThread=83cb7024 hCurThread=03cb7262 hCurProc=03cb7002, KernelInit = 800dc3e4 4294767336 PID:3cb7002 TID:3cb7262 0x83cb7024: Detecting VFP... 4294767344 PID:3cb7002 TID:3cb7262 0x83cb7024: VFP Not Found! 4294767351 PID:3cb7002 TID:3cb7262 0x83cb7024: Updated eptr->e32_vsize to = 00016000 4294767363 PID:3cb7002 TID:3cb7262 0x83cb7024: >>> Loading module NK.EXE at address 0x800B8000-0x8016E000 (RW data at 0x811E6000-0x8121AD2B) Kernel debugger connected (KDBG stream opened). Kernel Version 1169 loaded at 0x800b8000, data relocated at 0x811e6000 Debugger connection established (Target CPU is ARM). Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\NK.EXE' Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\KD.DLL' Finished re-loading kernel modules. Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\CELOG.DLL' Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\COREDLL.DLL' Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\FILESYS.EXE' 4294767383 PID:3cb7002 TID:3cb7262 0x83cb7024: Updated eptr->e32_vsize to = 00005000 4294767393 PID:3cb7002 TID:3cb7262 0x83cb7024: >>> Loading module celog.dll at address 0x80188000-0x8018D000 (RW data at 0x812214B0-0x812219F0) 4294767410 PID:3cb7002 TID:3cb7262 0x83cb7024: CeLogInit 4294767418 PID:3cb7002 TID:3cb7262 0x83cb7024: CeLog: Large buffer size unspecified, using default size 4294767430 PID:3cb7002 TID:3cb7262 0x83cb7024: CeLog: Small buffer size invalid or unspecified, using default size 4294767442 PID:3cb7002 TID:3cb7262 0x83cb7024: CeLog: Large buffer size = 131072 4294767451 PID:3cb7002 TID:3cb7262 0x83cb7024: CeLog: Small buffer size = 4096 4294767467 PID:3cb7002 TID:3cb7262 0x83cb7024: -CeLogInit 4294767475 PID:3cb7002 TID:3cb7262 0x83cb7024: CeLog Zones : CE = 0xFFBFFFFF, User = 0xFFBFFFFF, Proc = 0xFFFFFFFF 4294767487 PID:3cb7002 TID:3cb7262 0x83cb7024: CeLog is now live! 4294767496 PID:3cb7002 TID:3cb7262 0x83cb7024: first = 01eb0000, last = 02000000, SharedDllBase = 030c0000 4294767562 PID:3cb7002 TID:3cb7262 0x83cb7024: >>> Loading module coredll.dll at address 0x03F10000-0x03FF5000 (RW data at 0x01FFF000-0x01FFFFB8) 4294767616 PID:43c7dd82 TID:43c7dd5e 0x83c7db20: >>> Loading module filesys.exe at address 0x04010000-0x0408A000 4294767646 PID:43c7dd82 TID:43c7dd5e 0x83c7db20: FileSystem Starting - starting with clean file system 4294770664 PID:43c7dd82 TID:43c7dd5e 0x83c7db20: >>> Loading module fsdmgr.dll at address 0x03DB0000-0x03DCD000 (RW data at 0x01FEE000-0x01FEE760) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\FSDMGR.DLL' 4294770712 PID:43c7dd82 TID:43c7dd5e 0x83c7db20: InitSharedHeap: 42100000 10000 c 4294770724 PID:43c7dd82 TID:43c7dd5e 0x83c7db20: InitSharedHeap: return 42100060 4294771187 PID:43c7dd82 TID:43c7dd5e 0x83c7db20: FSREG: Logging in default user. 4294771199 PID:43c7dd82 TID:43c7dd5e 0x83c7db20: SetCurrentUser: Logging out (nobody), logging in default 4294771210 PID:43c7dd82 TID:43c7dd5e 0x83c7db20: FS: Using default path "\profiles\" 4294771240 PID:43c7dd82 TID:43c7dd5e 0x83c7db20: SetCurrentUser: User hives not supported -- using same registry for all users 4294771255 PID:43c7dd82 TID:43c7dd5e 0x83c7db20: FS: Using default path "Windows\" 4294775244 PID:43c7dd82 TID:43c7dd5e 0x83c7db20: FS: Using default path "Windows\" 4294775315 PID:43c7dd82 TID:43c7dd5e 0x83c7db20: Initializing Database 4294775349 PID:43c7dd82 TID:43c7dd5e 0x83c7db20: DB:Validation: Name already exists DB_notify_events 4294775360 PID:43c7dd82 TID:43c7dd5e 0x83c7db20: DB:CeCreateDatabase failed 4294775382 PID:43c7dd82 TID:43c7dd5e 0x83c7db20: Filesystem initialized! 4294775393 PID:3cb7002 TID:83c7ff8e 0x83c7d63c: InitializeJit 4294775401 PID:3cb7002 TID:83c7ff8e 0x83c7d63c: InitMUI: DISABLED (-1039664360) 4294775483 PID:23c590fe TID:23c7dafe 0x83c593e8: InitSharedHeap: 42100000 0 c 4294775492 PID:23c590fe TID:23c7dafe 0x83c593e8: InitSharedHeap: return 42100060 4294775525 PID:23c590fe TID:23c7dafe 0x83c593e8: >>> Loading module pm.dll at address 0x03EE0000-0x03EFD000 (RW data at 0x01FFB000-0x01FFB6C4) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\PM.DLL' 4294775542 PID:23c590fe TID:23c7dafe 0x83c593e8: *** Power Manager: DLL_PROCESS_ATTACH - Current Process: 0x42, ID: 0x23c590fe *** 4294775557 PID:23c590fe TID:23c7dafe 0x83c593e8: >>> Loading module device.exe at address 0x06010000-0x06020000 Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\DEVICE.EXE' 4294775608 PID:23c590fe TID:23c7dafe 0x83c593e8: >>> Loading module ceddk.dll at address 0x03DA0000-0x03DA6000 (RW data at 0x01FEC000-0x01FEC068) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\CEDDK.DLL' 4294775625 PID:23c590fe TID:23c7dafe 0x83c593e8: Ceddk!CalibrateStallCounter: Enter 4294775647 PID:23c590fe TID:23c7dafe 0x83c593e8: Ceddk!CalibrateStallCounter: Could not find stall counter 4294775658 PID:23c590fe TID:23c7dafe 0x83c593e8: Ceddk!BeginCalibration: min(368) max(460) 4294775670 PID:23c590fe TID:23c7dafe 0x83c593e8: Ceddk!BeginCalibration: elapsed is 408 4294775681 PID:23c590fe TID:23c7dafe 0x83c593e8: Ceddk!BeginCalibration: delay is 9 4294775694 PID:23c590fe TID:23c7dafe 0x83c593e8: +PmInit 4294775701 PID:23c590fe TID:23c7dafe 0x83c593e8: +PlatformValidatePMRegistry 4294775723 PID:23c590fe TID:23c7dafe 0x83c593e8: -PlatformValidatePMRegistry: returning 0 4294775736 PID:23c590fe TID:23c7dafe 0x83c593e8: DeviceListsInit: default GUID found in registry as expected 4294775748 PID:23c590fe TID:23c7dafe 0x83c593e8: DeviceListCreate: creating list entry for class 8dd679ce-8ab4-43c8-a14a-ea4963faa715 4294775769 PID:23c590fe TID:23c7dafe 0x83c593e8: PlatformDeviceListInit: using stream interface to access class 8dd679ce-8ab4-43c8-a14a-ea4963faa715 4294775784 PID:23c590fe TID:23c7dafe 0x83c593e8: DeviceListCreate: creating list entry for class 98c5250d-c29a-4985-ae5f-afe5367e5006 4294775805 PID:23c590fe TID:23c7dafe 0x83c593e8: PlatformDeviceListInit: using stream interface to access class 98c5250d-c29a-4985-ae5f-afe5367e5006 4294775820 PID:23c590fe TID:23c7dafe 0x83c593e8: DeviceListCreate: creating list entry for class eb91c7c9-8bf6-4a2d-9ab8-69724eed97d1 4294775840 PID:23c590fe TID:23c7dafe 0x83c593e8: PlatformDeviceListInit: using display interface to access class eb91c7c9-8bf6-4a2d-9ab8-69724eed97d1 4294775857 PID:23c590fe TID:23c7dafe 0x83c593e8: InitDisplayDeviceInterface: returning 1 4294775869 PID:23c590fe TID:23c7dafe 0x83c593e8: DeviceListCreate: creating list entry for class a32942b7-920c-486b-b0e6-92a702a99b35 4294775889 PID:23c590fe TID:23c7dafe 0x83c593e8: PlatformDeviceListInit: using stream interface to access class a32942b7-920c-486b-b0e6-92a702a99b35 4294775908 PID:23c590fe TID:23c47e8e 0x83c7d63c: +PnpThreadProc: thread 0x23c47e8e 4294775931 PID:23c590fe TID:23c47fde 0x83c43400: +ResumeThreadProc: thread 0x23c47fde 4294775946 PID:23c590fe TID:23c47f6a 0x83c43a3c: +ActivityTimersThreadProc: thread 0x23c47f6a 4294775973 PID:23c590fe TID:23c47f6a 0x83c43a3c: ActivityTimerCreate: ActivityTimerCreate('UserActivity') returning 0x00000000 4294775996 PID:23c590fe TID:23c47f6a 0x83c43a3c: ActivityTimerCreate: ActivityTimerCreate('SystemActivity') returning 0x00000000 4294776015 PID:23c590fe TID:a3c43c7a 0x83c3fd6c: +SystemThreadProc: thread 0xa3c43c7a 4294776029 PID:23c590fe TID:a3c43c7a 0x83c3fd6c: +PlatformManageSystemPower 4294776052 PID:23c590fe TID:a3c43c7a 0x83c3fd6c: PlatformPMActivelyManagesPower: returning 1 4294776069 PID:23c590fe TID:a3c43c7a 0x83c3fd6c: PlatformManageSystemPower: waiting for initialization to complete 4294776082 PID:23c590fe TID:83c43d52 0x83c3d4a8: +BatteryMonitorThreadProc: thread 0x83c43d52 4294776095 PID:23c590fe TID:83c43d52 0x83c3d4a8: BatteryMonitorThreadProc: battery interface APIs not available, exiting 4294776108 PID:23c590fe TID:83c43d52 0x83c3d4a8: -BatteryMonitorThreadProc: exiting 4294776119 PID:23c590fe TID:23c7dafe 0x83c593e8: -PmInit: returning 1 4294776145 PID:23c590fe TID:a3c43c7a 0x83c3fd6c: PlatformManageSystemPower: initialization complete 4294776161 PID:23c590fe TID:a3c43c7a 0x83c3fd6c: PlatformLoadTimeouts: ACUserIdle 60000, ACSystemIdle 300000, ACSuspend -1, BattUserIdle 60000, BattSystemIdle 180000, BattSuspend 300000 4294776181 PID:23c590fe TID:23c7dafe 0x83c593e8: DEVICE!DevloadInit 4294776194 PID:23c590fe TID:23c7dafe 0x83c593e8: DEVICE!InitDevices: Root Key is Drivers\BuiltIn. 4294776205 PID:23c590fe TID:23c7dafe 0x83c593e8: DEVICE!ActivateDeviceEx(Drivers\BuiltIn) entered 4294776243 PID:23c590fe TID:23c7dafe 0x83c593e8: >>> Loading module regenum.dll at address 0x03F00000-0x03F07000 (RW data at 0x01FFD000-0x01FFD4A4) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\REGENUM.DLL' 4294776326 PID:23c590fe TID:23c7dafe 0x83c593e8: DEVICE!ActivateDeviceEx(Drivers\BuiltIn\PCMCIA) entered 4294776375 PID:43c7dd82 TID:e3c60a5a 0x83c7d89c: >>> Loading module psmfsd.dll at address 0x030D0000-0x03104000 (RW data at 0x01F4A000-0x01F5A870) Loaded 'psmfsd.dll', no matching symbolic information found. 4294776393 PID:43c7dd82 TID:e3c60a5a PSMFSD:DLL Process Attach 4294779447 PID:23c590fe TID:23c7dafe 0x83c593e8: >>> Loading module pcmcia.dll at address 0x03140000-0x03166000 (RW data at 0x01F5E000-0x01F5EB70) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\PCMCIA.DLL' 4294779464 PID:23c590fe TID:23c7dafe 0x83c593e8: PCMCIA.DLL DLL_PROCESS_ATTACH 4294781639 PID:23c590fe TID:23c7dafe 0x83c593e8: PCMCIADriverInit: Done!. 4294781662 PID:23c590fe TID:23c7dafe 0x83c593e8: PCMCIA:InitWindowInfo: Window 0 (16 bit Attribute window on socket 0) 4294781678 PID:23c590fe TID:23c7dafe 0x83c593e8: PCMCIA:InitWindowInfo: Window 1 (16 bit Attribute window on socket 1) 4294781694 PID:23c590fe TID:23c7dafe 0x83c593e8: PCMCIA:InitWindowInfo: Window 2 (16 bit Common window on socket 0) 4294781709 PID:23c590fe TID:23c7dafe 0x83c593e8: PCMCIA:InitWindowInfo: Window 3 (16 bit Common window on socket 1) 4294781725 PID:23c590fe TID:23c7dafe 0x83c593e8: PCMCIA:InitWindowInfo: Window 4 (8 bit I/O window on socket 0) 4294781739 PID:23c590fe TID:23c7dafe 0x83c593e8: PCMCIA:InitWindowInfo: Window 5 (8 bit I/O window on socket 1) 4294781754 PID:23c590fe TID:23c7dafe 0x83c593e8: PCMCIA:InitWindowInfo: Window 6 (16 bit I/O window on socket 0) 4294781769 PID:23c590fe TID:23c7dafe 0x83c593e8: PCMCIA:InitWindowInfo: Window 7 (16 bit I/O window on socket 1) 4294781782 PID:23c590fe TID:23c7dafe 0x83c593e8: PCMCIA: 8 memory windows in the system 4294781791 PID:23c590fe TID:23c7dafe 0x83c593e8: PCMCIA Windows: 4294781799 PID:23c590fe TID:23c7dafe 0x83c593e8: 7 4294781805 PID:23c590fe TID:23c7dafe 0x83c593e8: 6 4294781812 PID:23c590fe TID:23c7dafe 0x83c593e8: 5 4294781818 PID:23c590fe TID:23c7dafe 0x83c593e8: 4 4294781824 PID:23c590fe TID:23c7dafe 0x83c593e8: 3 4294781831 PID:23c590fe TID:23c7dafe 0x83c593e8: 2 4294781837 PID:23c590fe TID:23c7dafe 0x83c593e8: 1 4294781843 PID:23c590fe TID:23c7dafe 0x83c593e8: 0 4294781850 PID:23c590fe TID:23c7dafe 0x83c593e8: 4294781859 PID:23c590fe TID:23c7dafe 0x83c593e8: PCMCIA:GetPCMCIAThreadPriority - RegQueryValueEx(Priority256) failed 2 4294781879 PID:23c590fe TID:23c7dafe 0x83c593e8: PCMCIA:StatusChangeThread = 0xa3c1ff6a, IREQThread = 0xa3c1cf7e, CallbackThread = 0xa3c1ff8e 4294781896 PID:23c590fe TID:23c7dafe 0x83c593e8: PNP interface class {6BEAB08A-8914-42fd-B33F-61968B9AAB32} (PCMCIA Card Services) ATTACH 4294781922 PID:23c590fe TID:23c7dafe 0x83c593e8: DEVICE!ActivateDeviceEx(Drivers\BuiltIn\Serial) entered 4294781973 PID:23c590fe TID:23c7dafe 0x83c593e8: >>> Loading module xsc1bd_serial.dll at address 0x03110000-0x03135000 (RW data at 0x01F5C000-0x01F5C608) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\XSC1BD_SERIAL.DLL' 4294782017 PID:23c590fe TID:23c7dafe 0x83c593e8: ??????????????????+HW_XSC1_INIT, 0x30D60 :Reiniting UART for 38400 8N1 mode !!! 4294782040 PID:23c590fe TID:23c7dafe 0x83c593e8: PNP interface class {f8a6ba98-087a-43ac-a9d8-b7f13c5bae31} (COM1:) ATTACH 4294782065 PID:23c590fe TID:23c7dafe 0x83c593e8: DEVICE!ActivateDeviceEx(Drivers\BuiltIn\NDIS) entered 4294782145 PID:23c590fe TID:23c7dafe 0x83c593e8: >>> Loading module cxport.dll at address 0x03CE0000-0x03CEB000 (RW data at 0x01FE2000-0x01FE27FC) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\CXPORT.DLL' 4294782179 PID:23c590fe TID:23c7dafe 0x83c593e8: >>> Loading module ndis.dll at address 0x03B30000-0x03B8F000 (RW data at 0x01FC8000-0x01FC8BB4) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\NDIS.DLL' 4294782239 PID:23c590fe TID:23c7dafe 0x83c593e8: NDIS: RebindAdaptersOnResume = 0 4294782300 PID:23c590fe TID:63c0523e 0x83c05708: PNP interface class {6BEAB08A-8914-42fd-B33F-61968B9AAB32} (PCMCIA Card Services) ATTACH 4294782317 PID:23c590fe TID:63c0523e 0x83c05708: PNP interface class {f8a6ba98-087a-43ac-a9d8-b7f13c5bae31} (COM1:) ATTACH 4294782332 PID:23c590fe TID:63c0523e 0x83c05708: NDIS: +ProcessPcmciaDeviceNotificationMessages 4294782752 PID:23c590fe TID:23c7dafe 0x83c593e8: PNP interface class {A32942B7-920C-486b-B0E6-92A702A99B35} (NDS0:) ATTACH 4294782802 PID:23c590fe TID:63c0523e 0x83c05708: NDIS: -ProcessPcmciaDeviceNotificationMessages 4294782821 PID:23c590fe TID:23c7dafe 0x83c593e8: DEVICE!ActivateDeviceEx(Drivers\BuiltIn\TAPI) entered 4294782887 PID:23c590fe TID:23c7dafe 0x83c593e8: >>> Loading module tapi.dll at address 0x03A00000-0x03A49000 (RW data at 0x01FB9000-0x01FB9C08) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\TAPI.DLL' 4294782942 PID:23c590fe TID:23c7dafe 0x83c593e8: TAPIStartup: LoadLibrary(unimodem.dll) failed, err=x7e 4294783026 PID:23c590fe TID:23c7dafe 0x83c593e8: >>> Loading module afd.dll at address 0x03B90000-0x03BC2000 (RW data at 0x01FCA000-0x01FCAEB8) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\AFD.DLL' 4294783068 PID:23c590fe TID:23c7dafe 0x83c593e8: >>> Loading module ppp.dll at address 0x03CF0000-0x03D42000 (RW data at 0x01FE4000-0x01FE4D68) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\PPP.DLL' 4294783117 PID:23c590fe TID:23c7dafe 0x83c593e8: >>> Loading module tcpstk.dll at address 0x03A50000-0x03B10000 (RW data at 0x01FBB000-0x01FC2E50) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\TCPSTK.DLL' 4294783135 PID:23c590fe TID:23c7dafe 0x83c593e8: TCPIP: dllentry() 4294783170 PID:23c590fe TID:23c7dafe 0x83c593e8: EAP: ERROR - unable to find Dll netlog.dll 4294783223 PID:23c590fe TID:23c7dafe 0x83c593e8: EAP: ERROR - unable to find Dll eap.dll 4294783236 PID:23c590fe TID:23c7dafe 0x83c593e8: InitRcvs s_FreePRcvLock 1FCA69C 4294783245 PID:23c590fe TID:23c7dafe 0x83c593e8: InitNotifyObjects: s_FreeNotifyLock 1FCA674 4294783255 PID:23c590fe TID:3bfef9e 0x83bf9000: PNP interface class {6BEAB08A-8914-42fd-B33F-61968B9AAB32} (PCMCIA Card Services) ATTACH 4294783275 PID:23c590fe TID:3bfef9e 0x83bf9000: PNP interface class {f8a6ba98-087a-43ac-a9d8-b7f13c5bae31} (COM1:) ATTACH 4294783294 PID:23c590fe TID:3bfef9e 0x83bf9000: PNP interface class {A32942B7-920C-486b-B0E6-92A702A99B35} (NDS0:) ATTACH 4294783347 PID:23c590fe TID:3bfef9e 0x83bf9000: TAPI:AddTapiDevice: GetDeviceKeys(PCMCIA Card Services) returned 1200 4294783460 PID:23c590fe TID:23c7dafe 0x83c593e8: !AFD:AfdInitialize: Can't open Registry key Comm\AFD -- creating 'Stacks' entry 4294783487 PID:23c590fe TID:23c7dafe 0x83c593e8: TCPIP.Register() 4294783494 PID:23c590fe TID:23c7dafe 0x83c593e8: +IPInit() 4294783503 PID:23c590fe TID:23c7dafe 0x83c593e8: +IPGetConfig 4294783542 PID:23c590fe TID:23c7dafe 0x83c593e8: -IPGetConfig: Ret: 0x170070 4294783589 PID:23c590fe TID:3bfef9e 0x83bf9000: TAPI:OldAddTapiDevice - This BSP is loading TSPs by old method!!! Change registry settings to use new way!!! 4294783634 PID:23c590fe TID:3bfef9e 0x83bf9000: TAPIStartup: LoadLibrary(Unimodem.dll) failed, err=x7e 4294783783 PID:23c590fe TID:3bfef9e 0x83bf9000: TAPI:OldAddTapiDevice RegQueryValueEx(Tsp) returned 2 4294783828 PID:23c590fe TID:23c7dafe 0x83c593e8: IPInit: Unable to Load IPSEC 4294783898 PID:23c590fe TID:23c7dafe 0x83c593e8: >>> Loading module ws2.dll at address 0x03C90000-0x03CA2000 (RW data at 0x01FDC000-0x01FDCAE8) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\WS2.DLL' 4294783924 PID:23c590fe TID:23c7dafe 0x83c593e8: >>> Loading module iphlpapi.dll at address 0x03CC0000-0x03CDC000 (RW data at 0x01FE0000-0x01FE0C50) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\IPHLPAPI.DLL' 4294783964 PID:23c590fe TID:23c7dafe 0x83c593e8: >>> Loading module winsock.dll at address 0x03CB0000-0x03CB6000 (RW data at 0x01FDE000-0x01FDE084) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\WINSOCK.DLL' 4294783981 PID:23c590fe TID:23c7dafe 0x83c593e8: >>> Loading module autoras.dll at address 0x03B10000-0x03B17000 (RW data at 0x01FC4000-0x01FC450C) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\AUTORAS.DLL' 4294784023 PID:23c590fe TID:23c7dafe 0x83c593e8: IGMPDelInclList: AddrPtr=170ca0 NumDelSources=0 DelSourceList=0 4294784035 PID:23c590fe TID:23c7dafe 0x83c593e8: -IPInit [SUCCESS] 4294784043 PID:23c590fe TID:23c7dafe 0x83c593e8: +TCPGetConfigInfo 4294784079 PID:23c590fe TID:23c7dafe 0x83c593e8: -TCPGetConfigInfo 4294784102 PID:23c590fe TID:23c7dafe 0x83c593e8: *InitTCB: SetIdleTimerReset 4294784135 PID:23c590fe TID:23c7dafe 0x83c593e8: +IPD_Init(0) 4294784146 PID:23c590fe TID:23c7dafe 0x83c593e8: +TCP_Init(0) 4294784153 PID:23c590fe TID:23c7dafe 0x83c593e8: TCPIP.About to register 4294784202 PID:23c590fe TID:23c7dafe 0x83c593e8: !AFD: Unable to load library 'tcpip6.dll' 4294784241 PID:23c590fe TID:23c7dafe 0x83c593e8: !AFD: Unable to load library 'irdastk.dll' 4294784279 PID:23c590fe TID:23c7dafe 0x83c593e8: !AFD: Unable to load library 'btd.dll' 4294784318 PID:23c590fe TID:23c7dafe 0x83c593e8: !AFD: Unable to load library 'Netbios.dll' 4294784355 PID:23c590fe TID:23c7dafe 0x83c593e8: !AFD: Unable to load library 'Redir.dll' 4294784393 PID:23c590fe TID:23c7dafe 0x83c593e8: !AFD: Unable to load library 'Dhcp.dll' 4294784432 PID:23c590fe TID:23c7dafe 0x83c593e8: !AFD: Unable to load library 'IPNat.dll' 4294784471 PID:23c590fe TID:23c7dafe 0x83c593e8: >>> Loading module ws2instl.dll at address 0x03C80000-0x03C86000 (RW data at 0x01FDA000-0x01FDA04C) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\WS2INSTL.DLL' 4294784497 PID:23c590fe TID:23c7dafe 0x83c593e8: Ws2Instl dllentry() -2084692500 4294784543 PID:23c590fe TID:23c7dafe 0x83c593e8: Ws2Instl:IsStackInstalled - LoadLibrary(irdastk) failed 126 4294784588 PID:23c590fe TID:23c7dafe 0x83c593e8: Ws2Instl:IsStackInstalled - LoadLibrary(btd) failed 126 4294784634 PID:23c590fe TID:23c7dafe 0x83c593e8: Ws2Instl:IsStackInstalled - LoadLibrary(tcpip6) failed 126 4294784698 PID:23c590fe TID:23c7dafe 0x83c593e8: >>> Loading module ssllsp.dll at address 0x03C40000-0x03C54000 (RW data at 0x01FD3000-0x01FD400C) 4294784708 PID:23c590fe TID:83c0befa 0x83bf2448: IPTimer: setting IPTimer of NTE 170160 to 0 4294784721 PID:23c590fe TID:83c0befa 0x83bf2448: *IPTimeout: NOT restarting IPTimeout Timer for NTE 170160 Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\SSLLSP.DLL' 4294784789 PID:23c590fe TID:23c7dafe 0x83c593e8: *TCPIP:ReadyToGo 4294784797 PID:23c590fe TID:23c7dafe 0x83c593e8: +ARPInit() 4294784827 PID:23c590fe TID:23c7dafe 0x83c593e8: -ARPInit [0] 4294784864 PID:23c590fe TID:23c7dafe 0x83c593e8: !AFD: Unable to load library 'tcpip6.dll' 4294784902 PID:23c590fe TID:23c7dafe 0x83c593e8: !AFD: Unable to load library 'irdastk.dll' 4294784943 PID:23c590fe TID:23c7dafe 0x83c593e8: !AFD: Unable to load library 'btd.dll' 4294784980 PID:23c590fe TID:23c7dafe 0x83c593e8: !AFD: Unable to load library 'Netbios.dll' 4294785018 PID:23c590fe TID:23c7dafe 0x83c593e8: !AFD: Unable to load library 'Redir.dll' 4294785057 PID:23c590fe TID:23c7dafe 0x83c593e8: !AFD: Unable to load library 'Dhcp.dll' 4294785095 PID:23c590fe TID:23c7dafe 0x83c593e8: !AFD: Unable to load library 'IPNat.dll' 4294785105 PID:23c590fe TID:23c7dafe 0x83c593e8: !AFD: Unable to GetProcAddress of ReadyToGo in 'Ws2Instl' 4294785116 PID:23c590fe TID:23c7dafe 0x83c593e8: AFD: Initialization Complete 4294785139 PID:23c590fe TID:23c7dafe 0x83c593e8: DEVICE!ActivateDeviceEx(Drivers\BuiltIn\sdmmcloader) entered 4294785193 PID:23c590fe TID:23c7dafe 0x83c593e8: DEVICE!StartOneDriver RegisterDevice(SML, 1, sdmmc_loader.dll, 0x602ee68) failed 4294785229 PID:23c590fe TID:23c7dafe 0x83c593e8: DEVICE!ActivateDeviceEx(Drivers\BuiltIn\autoras) entered 4294785254 PID:23c590fe TID:23c7dafe 0x83c593e8: AUTORAS:: ARS_Init().. 4294785269 PID:23c590fe TID:23c7dafe 0x83c593e8: AUTORAS:: Reg[Dialer] = [rnaapp.exe] 4294785282 PID:23c590fe TID:23c7dafe 0x83c593e8: AUTORAS:: Reg[RasEntryOpt] = [-e] 4294785295 PID:23c590fe TID:23c7dafe 0x83c593e8: AUTORAS:: Reg[NoPromptOpt] = [-p] 4294785337 PID:23c590fe TID:23c7dafe 0x83c593e8: PNP interface class {f8a6ba98-087a-43ac-a9d8-b7f13c5bae31} (ARS1:) ATTACH 4294785405 PID:23c590fe TID:23c7dafe 0x83c593e8: DEVICE!ActivateDeviceEx(Drivers\BuiltIn\NdisPower) entered 4294785470 PID:23c590fe TID:23c7dafe 0x83c593e8: >>> Loading module ndispwr.dll at address 0x03B20000-0x03B26000 (RW data at 0x01FC6000-0x01FC6514) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\NDISPWR.DLL' 4294785500 PID:23c590fe TID:23c7dafe 0x83c593e8: PNP interface class {f8a6ba98-087a-43ac-a9d8-b7f13c5bae31} (NPW1:) ATTACH 4294785540 PID:23c590fe TID:3bfef9e 0x83bf9000: TAPI:OldAddTapiDevice RegQueryValueEx(Tsp) returned 2 4294785602 PID:23c590fe TID:3bfef9e 0x83bf9000: TAPI:OldAddTapiDevice RegQueryValueEx(Tsp) returned 2 4294785652 PID:23c590fe TID:23c7dafe 0x83c593e8: DEVICE!ActivateDeviceEx(Drivers\BuiltIn\FlshDrv) entered 4294785667 PID:23c590fe TID:23c7dafe 0x83c593e8: DEVICE!StartOneDriver RegQueryValueEx(Drivers\BuiltIn\FlshDrv\DllName) returned 2 4294785814 PID:23c7dada TID:23bb8f6e 0x83bb0000: InitSharedHeap: 42100000 0 c 4294785823 PID:23c7dada TID:23bb8f6e 0x83bb0000: InitSharedHeap: return 42100060 4294785834 PID:23c7dada TID:23bb8f6e 0x83bb0000: >>> Loading module gwes.exe at address 0x08010000-0x08180000 Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\GWES.EXE' 4294785871 PID:23c7dada TID:23bb8f6e 0x83bb0000: Grow Gdi handle table from 0 to 64 4294785958 PID:23c7dada TID:23bb8f6e 0x83bb0000: >>> Loading module ddi.dll at address 0x031A0000-0x031D0000 (RW data at 0x01F64000-0x01F684B8) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\DDI.DLL' 4294786055 PID:23c7dada TID:23bb8f6e 0x83bb0000: InitializeDisplayHardware Complete 4294786185 PID:23c7dada TID:23bb8f6e 0x83bb0000: Bits-per-pixel: 16 4294786243 PID:23c7dada TID:23bb8f6e 0x83bb0000: Adding font resource '\Windows\tahoma.ttf'... 4294786290 PID:23c7dada TID:23bb8f6e 0x83bb0000: **** Signature of FONT File is: '0100'... 4294786361 PID:23c7dada TID:23bb8f6e 0x83bb0000: Creating secondary frame buffer for POR and SaveBits 4294786534 PID:23c7dada TID:23bb8f6e 0x83bb0000: >>> Loading module kbdmouse.dll at address 0x03170000-0x03185000 (RW data at 0x01F60000-0x01F60D54) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\KBDMOUSE.DLL' 4294786553 PID:23c7dada TID:23bb8f6e 0x83bb0000: Layout Manager : DLL_PROCESS_ATTACH 4294786566 PID:23c7dada TID:23bb8f6e 0x83bb0000: PS2_SA11X1_Entry: Initialize PS2 ID 0 4294786578 PID:23c7dada TID:23bb8f6e 0x83bb0000: PS2Port::initialize 4294786590 PID:23c7dada TID:23bb8f6e 0x83bb0000: ReadRegDWORD(): HARDWARE\DEVICEMAP\KEYBD -> KbBase is -1083176448 (0xbf700a00) 4294786608 PID:23c7dada TID:23bb8f6e 0x83bb0000: ReadRegDWORD(): HARDWARE\DEVICEMAP\MOUSE -> MouseBase is -1083175936 (0xbf700c00) 4294786627 PID:23c7dada TID:23bb8f6e 0x83bb0000: ReadRegDWORD(): HARDWARE\DEVICEMAP\KEYBD -> PllBase is -1083178496 (0xbf700200) 4294786682 PID:23c590fe TID:23b18f72 0x83b18d34: PNP interface class {6BEAB08A-8914-42fd-B33F-61968B9AAB32} (PCMCIA Card Services) ATTACH 4294786699 PID:23c590fe TID:23b18f72 0x83b18d34: PNP interface class {f8a6ba98-087a-43ac-a9d8-b7f13c5bae31} (COM1:) ATTACH 4294786715 PID:23c590fe TID:23b18f72 0x83b18d34: PNP interface class {A32942B7-920C-486b-B0E6-92A702A99B35} (NDS0:) ATTACH 4294786733 PID:23c590fe TID:23b18f72 0x83b18d34: PNP interface class {f8a6ba98-087a-43ac-a9d8-b7f13c5bae31} (ARS1:) ATTACH 4294786748 PID:23c590fe TID:23b18f72 0x83b18d34: PNP interface class {f8a6ba98-087a-43ac-a9d8-b7f13c5bae31} (NPW1:) ATTACH 4294786804 PID:23c7dada TID:23bb8f6e 0x83bb0000: KeyboardCommandPut Error ff 4294786813 PID:23c7dada TID:23bb8f6e 0x83bb0000: KeyboardCommandPut Error f0 4294786968 PID:23c7dada TID:23bb8f6e 0x83bb0000: MouseCommandPut Error. Received 0xff instead of 0xfa 4294786979 PID:23c7dada TID:23bb8f6e 0x83bb0000: MouseCommandPut Error. Received 0xf2 instead of 0xfa 4294786990 PID:23c7dada TID:23bb8f6e 0x83bb0000: MouseTest fails. Mouse probably not present. 4294787001 PID:23c7dada TID:23bb8f6e 0x83bb0000: Ps2Port::Initialize Complete 4294787171 PID:23c7dada TID:23bb8f6e 0x83bb0000: KeyboardCommandPut Error b4 4294787181 PID:23c7dada TID:23bb8f6e 0x83bb0000: PS2_SA11X1_Entry: Initialization complete 4294787191 PID:23c7dada TID:23bb8f6e 0x83bb0000: KeybdDriverInitializeEx: Initialized PDD 0 - PS/2 SA11X1 (Mask 2) 4294787230 PID:23c7dada TID:23bb8f6e 0x83bb0000: KeybdDriverInitializeEx: Found default input method 00000409 4294787266 PID:23c7dada TID:23bb8f6e 0x83bb0000: KeybdDriverInitializeEx: Layout Manager successfully initialized 4294787277 PID:23c7dada TID:23b15696 0x83b15bb0: ReadRegDWORD: RegQueryValueEx(Priority256) returned 2 4294787396 PID:23c7dada TID:23b15696 0x83b15bb0: ReadRegDWORD(): HARDWARE\DEVICEMAP\KEYBD -> SysIntr is 16 (0x10) 4294787411 PID:23c7dada TID:23b15696 0x83b15bb0: Enabling the keyPad Intr 4294787422 PID:23c7dada TID:23b15696 0x83b15bb0: ReadRegDWORD: RegQueryValueEx(EnableWake) returned 2 4294787627 PID:23c7dada TID:23bb8f6e 0x83bb0000: Could not find touch driver dll. 4294787702 PID:23c7dada TID:23bb8f6e 0x83bb0000: Oom Low Pages: 0020 Bytes: 00020000 4294787712 PID:23c7dada TID:23bb8f6e 0x83bb0000: Oom Critical Pages: 0014 Bytes: 00014000 4294787723 PID:23c7dada TID:23bb8f6e 0x83bb0000: Oom Low Block Pages: 0004 Bytes: 00004000 4294787733 PID:23c7dada TID:23bb8f6e 0x83bb0000: Oom Critical Block Pages: 0002 Bytes: 00002000 4294787744 PID:23c7dada TID:23bb8f6e 0x83bb0000: Oom App Wait 8000 (dec ms) 4294787762 PID:23c7dada TID:a3b0f24e 0x83b0f670: Grow Gdi handle table from 64 to 128 4294787858 PID:23c7dada TID:23bb8f6e 0x83bb0000: Oom AutoOom 0 4294787873 PID:23c7dada TID:23bb8f6e 0x83bb0000: UpdateIdleTimeoutFromRegistry 4294787929 PID:23c7dada TID:e3b0fcde 0x83b0aa3c: NOTIFICATION::NotifyInit thread 4294787940 PID:23c7dada TID:e3b0fcde 0x83b0aa3c: NOTIFICATION::MakeDatabases 4294787950 PID:43c7dd82 TID:e3b0fcde 0x83b0aa3c: DB:OpenDB fail: DB DB_notify_queue not found 4294787961 PID:23c7dada TID:e3b0fcde 0x83b0aa3c: NOTIFICATION::MakeDatabases::Creating DB for timing notifications 4294787977 PID:23c7dada TID:e3b0fcde 0x83b0aa3c: NOTIFICATION::MakeDatabases::Opened DB for timing notifications 4294787991 PID:23c7dada TID:e3b0fcde 0x83b0aa3c: NOTIFICATION::MakeDatabases::Opened DB for system event associations 4294788003 PID:23c7dada TID:e3b0fcde 0x83b0aa3c: NOTIFICATION::MakeSynchPrimitives 4294788013 PID:23c7dada TID:e3b0fcde 0x83b0aa3c: NOTIFICATION::StartUI 4294788024 PID:23c7dada TID:a3b0af92 0x83b05400: NOTIFICATION::UIThreadProc::UI thread started. Creating UI... 4294788123 PID:a3b058c2 TID:a3c59aa6 0x83b05684: InitSharedHeap: 42100000 0 c 4294788132 PID:a3b058c2 TID:a3c59aa6 0x83b05684: InitSharedHeap: return 42100060 4294788162 PID:a3b058c2 TID:a3c59aa6 0x83b05684: >>> Loading module ole32.dll at address 0x038F0000-0x03949000 (RW data at 0x01FB0000-0x01FB1518) 4294788172 PID:23c7dada TID:e3b0fcde 0x83b0aa3c: NOTIFICATION::StartAlarm 4294788287 PID:23c7dada TID:e3b0fcde 0x83b0aa3c: NOTIFICATION::Constructor::Setting event semaphore Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\OLE32.DLL' 4294788324 PID:a3b058c2 TID:a3c59aa6 0x83b05684: >>> Loading module oleaut32.dll at address 0x038A0000-0x038EE000 (RW data at 0x01FAE000-0x01FAEEE8) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\OLEAUT32.DLL' 4294788383 PID:a3b058c2 TID:a3c59aa6 0x83b05684: >>> Loading module commctrl.dll at address 0x03E10000-0x03ECF000 (RW data at 0x01FF6000-0x01FF6AE8) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\COMMCTRL.DLL' 4294788465 PID:a3b058c2 TID:a3c59aa6 0x83b05684: >>> Loading module aygshell.dll at address 0x03330000-0x03349000 (RW data at 0x01F7E000-0x01F7E798) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\AYGSHELL.DLL' 4294788591 PID:a3b058c2 TID:a3c59aa6 0x83b05684: >>> Loading module shcore.dll at address 0x032C0000-0x032C7000 (RW data at 0x01F7A000-0x01F7A068) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\SHCORE.DLL' 4294788609 PID:a3b058c2 TID:a3c59aa6 0x83b05684: >>> Loading module ceshell.dll at address 0x032D0000-0x03325000 (RW data at 0x01F7C000-0x01F7CC00) Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\CESHELL.DLL' 4294788708 PID:a3b058c2 TID:a3c59aa6 0x83b05684: >>> Loading module explorer.exe at address 0x0A010000-0x0A072000 Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\EXPLORER.EXE' 4294788727 PID:23c7dada TID:43b0563e 0x83afc8dc: NOTIFICATION::AlarmThreadProc::Alarm thread started. 4294788738 PID:23c7dada TID:43b0563e 0x83afc8dc: NOTIFICATION::ProcessDatabase::Starting Database Sweep at 06/01/1999 11:26:30 for 01beac219e23d800 4294788754 PID:23c7dada TID:43b0563e 0x83afc8dc: NOTIFICATION::ProcessDatabase::Check wake-up validity/message retiring 4294788766 PID:23c7dada TID:43b0563e 0x83afc8dc: NOTIFICATION::ProcessDatabase::Wait FOREVER 4294788818 PID:43c7dd82 TID:a3c59aa6 0x83b05684: >>> Loading module cplmain.cpl at address 0x7FFB0000-0x7FFF3000 Loaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\CPLMAIN.CPL' 4294788833 PID:43c7dd82 TID:a3c59aa6 0x83b05684: <<< Unloading module cplmain.cpl at address 0x7FFB0000-0x7FFF3000 Unloaded symbols for 'C:\WINCE420\PUBLIC\TEST\RELDIR\INTEL_DBPXA250_DEV_PLATFORMARMV4IDEBUG\CPLMAIN.CPL' 4294788881 PID:23c590fe TID:43c7dd5e 0x83c7db20: -DEVICE!DevloadPostInit 4294788913 PID:a3b058c2 TID:a3c59aa6 0x83b05684: Entering InitCapEdit 4294788929 PID:a3b058c2 TID:a3c59aa6 0x83b05684: CAPEDIT registered(49177) 4294788945 PID:a3b058c2 TID:a3c59aa6 0x83b05684: InitTTButton: 4294789160 PID:a3b058c2 TID:a3c59aa6 0x83b05684: Console NOT redirected for process 0x42 4294789631 PID:23c7dada TID:a3c59aa6 0x83b05684: Grow Gdi handle table from 128 to 192 4294790832 PID:43c7dd82 TID:a3c59aa6 0x83b05684: DB:OpenDB fail: DB \RecycleInfo not found I don't understand what append. Can anybody help me ? Olivier SPINELLI Tag: Dialog apps for PocketPC in Platbuilder Tag: 52534
  - 21
    - Bluetooth : how to get started? Hi there, Let me first explain what I want to achieve. I have a custom Xscale device with a bluetooth module. This bluetooth module should function as a cable replacement. In the end, I want to be able to TALK to the device through a desktop computer using hyperterminal. To achieve this, I have included the Bluetooth - Uart only driver in my image. In my debug trace, I can see eveything is going fine. On my IPAQ I can even see the device through the bluetooth manager. This leads me to believe that this is all going according to plan. However, when I try to connect to my custom device, no bluetooth services are exposed. This seems logical as no profiles have been loaded just yet. I'm a bit at loss now. Where do I go from here? Is there an easy way to include the serial port profile on the device? I have gone through the samples that are included in platform builder (especially the sdp ones) but I have no idea what to do next. Do I first try to add an SDP record to advertise the serial port? Is this necessary and if so, how to do it? I can't seem to find a lot of samples or feedback. Any pointers would really help... After that, I would probably need to set up the pairing procedure? After that, I should probably be able to emulate a serial port on the device (using the comtest sample). Does anyone know the procedure to set this up? Kind regards, Jean Tag: Dialog apps for PocketPC in Platbuilder Tag: 52533
  - 22
    - including WPA support for cisco radio I am trying to get WPA included in my image with all the sysgen parameters as found in "Creating a WPA-enabled Wireless Configuration for a CEPC" doc found on the Microsoft site. For some reason WPA is not included in the image when I install. I have even included the QFEs for WPA roaming with no avail. I have all 7 sysgen parameters in the document set and do have the cisco driver included in the image but just cannot set WPA. The only options available for authentication are "Open" and "Shared" I have PB 4.20 and a xscale CE device Any help would be appreciated. Tag: Dialog apps for PocketPC in Platbuilder Tag: 52532
  - 23
    - Runnig built sample Hi, I have built bluetooth samples for ARM by platform builder, but I'm unable to run it on real PPC. It tells "'phoneiu' is not a valid PocketPC application (it has GUI , not console). What should i do for running it? ------ Saman Tag: Dialog apps for PocketPC in Platbuilder Tag: 52531
  - 24
    - Migrating from Windows CE 4.0 to 4.2 Hi ALL, I am migrating Hitachi PFM-DS11 windows CE 4.0 platform builder to windows CE 4.2 according to the guidelines given on following URL http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wcedsn40/html/cghowhowtomigratebsp.asp. On above URL there is mentioned that KErnel page size is to be incresed to 4K from 1K. "Enlarge the page sizes for SH3 and SH4 kernels from 1 KB to 4 KB, and then rebuild any application or device driver binary builds with a 1-KB page size. When you rebuild the binary builds, you enlarge the builds to a 4-KB page size. By performing this procedure, you ensure that the kernels load and run correctly on Windows CE .NET 4.2. Note In previous versions of Windows CE, the default page size for SHx kernels was 1 KB. If you do not enlarge the page size, any binary builds with a 1-KB page size will not run on the current version of Windows CE." I am not able to find any document/help on how to increase the kernel pagesize from 1K to 4K. Can anybody help me on this topic ??? Thanks in advance. regards, Rajesh Tag: Dialog apps for PocketPC in Platbuilder Tag: 52528
  - 25
    - How to modify the resource of File Open Dialog? Dear all I have a problem about the File Open Dialog in WinCE 4.20. It is bigger than my screen, so I want to modify its resource to fit the screen size I have finished the same thing to cplmain.rc. But I can not find the resource of File Open Dialog. Where is it I find a fileopen.res. It has the dialog. But I need its source code Help!!! Thanks!! Best Regards Jacky Tag: Dialog apps for PocketPC in Platbuilder Tag: 52527

If you build a dialog app for pocket pc in Platbuilder it gets built
like a windows ce app, it has an extra titlebar that you can use to
move the app. Is there any way around this? I want to build my extra
apps as part of the system build rather than building them in EVC.
Also WCE_PLATFORM_POCKET_PC_2003 is defined in EVC with the pocket pc
sdk but isn't in Platbuilder using the pocketpc system. Any comments?

Jon

Top