Debuging application in emulator

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - A Money Challenge>>Can You Do Itt? Here's the challenge: HOW TO MAKE THOUSANDS OF DOLLARS ON PAYPAL.COM THIS IS REAL... TAKE YOUR TIME AND READ THIS..... NOBODY IS SCAMMING YOU THE 5 MINUTES IT WILL TAKE YOU TO READ THIS WILL CHANGE YOUR FUTURE! TURN $6 INTO $6,000++!!! HOW TO MAKE THOUSANDS OF DOLLARS ON PAYPAL.COM I'm sure you've read these letters asking you to send $1 to 6 different addresses. Putting your home address or mailing address on the internet can be risky, but through paypal all you have to provide is your email address. It's safe and easy just go to www.paypal.com and set up your FREE account! No credit card needed. I am not a gullible person and Have never trusted things like this, but I gave it a try, hey its only $6, I figured at least 6 people would respond out of the millions of people that use the internet. You should give it a try too! You have nothing to lose, and $$ thousands to gain! Read on for the letter that I found... HOW TO TURN $6 INTO $6,000++!!! THIS REALLY CAN MAKE YOU EASY MONEY!!! IT WORKS!!! BUT YOU HAVE TO FOLLOW IT TO THE LETTER FOR IT TO WORK!!!! A little while back, I was browsing through newsgroups, just like you are now and came across an article similar to this that said you could make thousands of dollars within weeks with only an initial investment of $6.00! So I thought, "Yeah, right, this must be some kind of scam" but like most of us, I was curious, so I kept reading. Anyway, it said that you send $1.00 though paypal to each of the emails stated in the article. You then place your own email address in the bottom of the list at #6, and post the article in at least 200 news groups. (There are thousands) No catch. That was it. So after thinking it over, and talking to few people first, I thought about trying it. I figured what have I got to lose except $6.00,right? Like most of us I was a little skeptical and a little worried about the legal aspects of it. It follows the same regulations as the "mailed chain letters, which according to the U.S. Post Office (1-800-725-2161) is indeed legal! Then I invested the measly $6.00. Well GUESS WHAT!!? Within 7 days, I started getting money in my paypal account! I was shocked! I figured it would end soon, but the money just kept coming in. In my first week, I made about $15.00. By the end second week I had made a total over $800.00!!! In the third week I had over $6,000.00 and it's still growing. This is now my fourth week and I have made a total of just over $21,000.00 and it's still coming in rapidly. It's Certainly worth $6.00. I have spent more than that on the lottery!!!! Let me tell you how this works and most importantly, why it works? Also, make sure you print a copy of this article now, so that you can get the information off of it as you need it. $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ REQUIREMENTS: You must have a confirmed paypal account. If you do not Have a paypal account you can go to www.paypal.com and follow the instructions to set up a free account. In order to place the initial $6 into your account, you will have to confirm your bank account with paypal (which may take a few days). Paypal is 100% secure and is used by millions of people world wide. Confirming a www.paypal.com account simply means (1) paypal will first ask you to confirm the email you used to sign up your paypal account by sending you an email with a link for you to click to that email. As soon as you click that link your email is confirmed. (2) Paypal will then make two small deposits into your bank account if you set up your paypal account with a checking or savings bank account. Or paypal will make two small deposits to your credit card if you set up your paypal account with your credit card. Then after a few days (it takes up to a few days for these deposits to appear in your bank account or on your credit card statement) then after a few days you go back to the www.paypal.com website and sign in. Then you click where it says this account is not yet confirmed. A screen will pop up that gives you 2 boxes to fill in. You then enter the numbers of the 2 small deposit amounts (two separate 2 digit numbers) that were deposited to your bank account or credit card. Now you have a working and confirmed paypal account and can receive payments. $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ [STEP 1] Send, though paypal, $1.00 to each email on the below list. Make the subject of the payment "Email List" and in the comments, write "PLEASE PUT ME ON YOUR EMAIL LIST." What you are doing is creating a service by this - and best of all you are not giving your home address to anyone you do not know. THIS IS ABSOLUTELY LEGAL!! YOU ARE CREATING A SERVICE. The email list...... Paypal accounts are on this email lists; #1) jpenner_9472@hotmail.com #2) giveitatry@usenet.com #3) skippyo@msn.com #4) tgadams@hotmail.co.uk #5) dave77777777771@yahoo.com #6) rockuemore2208@aol.com WWW.PAYPAL.COM Subject of Payment: ***Email List*** Comments: ***PLEASE PUT ME ON YOUR EMAIL LIST.*** [STEP 2] Now take the #1) email off the list that you see above, move the other addresses up one (6 becomes 5 & 5 becomes 4, etc) the put YOUR email address (the one used in your paypal account) as #6) on the list. **MAKE SURE THE EMAIL YOU SUPPY IS EXACTLY AS IT APPEARS IN YOUR PAYPAL ACCOUNT.** [STEP 3] Change anything you need to, but try to keep this article as close to original as possible. Now, post your amended article to at least 200 newsgroups, message boards, etc. (I think there are about 32,000 groups or more) All you need is 200, but remember, the more you post, the more money you make - as well as everyone else on the list! Don't put them in the first 200 move around a little remember other people are doing the same thing you are. In this situation your job is to let as many people see this letter as possible. So they will make you and me rich!!!! You can even start posting the moment your email is confirmed. Payments Will still appear in your paypal account even while your bank account is being confirmed. --------------------------------------------------------------------------- ----- Payment Details Amount: $1.00 USD Subject: **Email List** Note: **PLEASE PUT ME ON YOUR EMAIL LIST** (email): username@whatever.??? View the details of this transaction online *********************************************************************** EVERY THING IS TRUE UNLESS U BELEIVE IN THAT!!! *********************************************************************** # DIRECTIONS # HOW TO POST TO NEWSGROUPS # MESSAGE BOARDS # Step #1) You do not need to re-type this entire letter to do your own posting. Simply put your CURSOR at the beginning of this letter and drag your CURSOR to the bottom of this document, and select 'copy' from the edit menu. This will copy the entire letter into your computer's temporary memory. Step #2) Open a blank 'Notepad' file and place your cursor at the top of the blank page. From the 'Edit' menu select 'Paste'. This will paste a copy of the letter into notepad so that you can add your email to the list. Steps #3) Save your new Notepad file as a .txt file. If you want to do your postings in different sittings, you'll always have this file to go back to. Step #4) Use Netscape or Internet Explorer and try searching for various newsgroups, on-line forums, message boards, bulletin boards, chat sites, discussions, discussion groups, online communities, etc. EXAMPLE: go to any search engine like yahoo.com, google.com, altavista.com, excite.com - then search with subjects like ?millionaire message board? or ?money making message board? or ?opportunity message board? or ?money making discussions? or ?business bulletin board? or ?money making forum? etc. You will find thousands & thousands of message boards. Click them one by one then you will find the option to post a new message. Step #5) Visit these message boards and post this article as a new message by highlighting the text of this letter and selecting 'Paste' from the 'Edit' menu. Fill in the Subject, this will be the header that everyone sees as they scroll thru the list of postings in a particular group, click the post message button. PayPal account holders can send and receive funds from all these countries below. U.S., Australian, Austrian, Belgian, Canadian, Danish, Finnish, French, German, Hong Kong, Irish, Italian, Korean, Mexican, Japanese, Dutch, New Zealand, Norwegian, Singaporean, Spanish, Swedish, Swiss, Taiwanese, United Kingdom, Argentina, Brazil, Chile, China, Ecuador, India, and Jamaica. You're done with your first one! Congratulations! THAT'S IT!! All you have to do is jump to different newsgroups and post away. After you get the hang of it, it will take about 30 seconds for each newsgroup! **REMEMBER, THE MORE NEWSGROUPS AND/OR MESSAGE BOARDS YOU POST IN, THE MORE MONEY YOU WILL MAKE!! BUT YOU HAVE TO POST A MINIMUM OF 200** That's it! You will begin receiving money within days! **JUST MAKE SURE THE EMAIL YOU SUPPY IS EXACTLY AS IT APPEARS ON PAYPAL.** $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ Now the WHY Part: Out of 200 postings, say I receive only 5 replies (a very low example). So then I Made $5.00 with my email at #6 on the letter. Now, each of the 5 persons who just sent me $1.00 make the MINIMUM 200 postings, each with my email at #5 and only 5 persons respond to each of the original 5, that is another $25.00 for me. Now those 25 each make 200 MINIMUM posts with my email at #4 and only 5 replies each, I will bring in an additional $125.00! Now, those 125 persons turn around and post the MINIMUM 200 with my email at #3 and only receive 5 replies each, I will make an additional $625.00! OK, now here is the fun part, each of those 625 persons post a MINIMUM 200 letters with my email at #2 and they only receive 5 replies that just made me $3,125.00!!! Those 3,125 persons will all deliver this message to 200 newsgroups with my email at #1 and if still 5 persons per 200 newsgroups react I will receive $15,625.00! With an original investment of only $6.00! AMAZING!! When your email is no longer on the list, you just take latest posting in the newsgroups, and send out another $6.00 to emails on the list, putting your email at number 6 again. And start posting again. Your paypal TRANSACTION ACTIVITY will look like this: DATE: June 30, 2008 *** TYPE: Payment *** TO/FROM: From *** NAME/EMAIL: Mary Jones GROSS: $1.00 USD *** PAYPAL FEE: -$0.33 USD *** NET AMOUNT: $0.67 USD ***ACTUAL AMOUNTS*** DATE: June 30, 2008 *** TYPE: Payment *** TO/FROM: From *** NAME/EMAIL: John Canada GROSS: $1.00 CAN *** PAYPAL FEE: -$0.11 CAN *** NET AMOUNT: $0.89 CAN ***ACTUAL AMOUNTS*** The thing to remember is, do you realize that thousands of people all over the world are joining the internet and reading these articles everyday, JUST LIKE YOU are now!! So can you afford $6?? And change your destiny??? Just see how it works!! Think It!! People have said, What if the plan is played out and no one sends you the money? So what are the chances of that happening when there are tons of new honest users and new honest people who are joining the internet and newsgroups everyday and are willing to give it a try? Estimates are at 20,000 to 50,000 new users, every day, with thousands of those joining the actual Internet. Remember, play FAIRLY and HONESTLY and this will work. Seriously, most people think this is a scam, but you actually do get thousands of dollars out of it, it is NOT another crazy scam, if people follow through with sending out $6, it works!!!!! Post a follow-up to this message!! Tag: Debuging application in emulator Tag: 70313
  - 2
    - How to expand memory size in emulator? Hi, There's total 64MB SDRAM in my board. Now, I'm debuging my program in emulator, and found the debug version of my image is too large(about 52MB), it will consume the system RAM resource when running, so I want to expand the memory size of the emulator, how can I? In the Target menu of PB5.0, I select the Connectivity Options/Download/Emulator Download Settings/Memory option, and set the memory size as 128MB, but it sames no use, is there anything others should modify? Best regards, Jack Zhao Tag: Debuging application in emulator Tag: 70312
  - 3
    - Customize WinCE Shell on PB5.0 > Dear Sirs: > > I'm using PB5.0 to test the method of customizing wince shell, > according to the following article, I downloaded the IESHELL.exe and > compiled it as a executable file, but there's still some problems: > > 1, I selected Projects/IESHELL/Settings/Custom Variables, and edit the > POSTLINK_PASS_CMD variable, added a line ("copy /y > obj\x86\debug\IESHELL.exe %_FLATRELEASEDIR%") to copy the executable file > to %_FLATRELEASEDIR%, but it always report: "The process cannot access the > file because it is being used by another process.", it's postlink-command, > why these occur? > > 2, How can I use the producing IESHELL.exe instead of the default > explorer.exe in my platform(5.0)? Should IESHELL.reg & IESHELL.bib be > used? (I didn't found any interface in PB5.0 to edit bib info) > > 3, Is their any documents about this topic for PB5.0 ? > > Best regards, > Jack Zhao > > "Steve Maillet (eMVP)" <nospam1@EntelechyConsulting.com> wrote in message > news:eD1aXDzdFHA.2420@TK2MSFTNGP15.phx.gbl... >> See the following article: >> http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnembedded/html/embedded05072002.asp >> >> -- >> Steve Maillet >> EmbeddedFusion >> www.EmbeddedFusion.com >> smaillet at EmbeddedFusion dot com >> >> > > > Tag: Debuging application in emulator Tag: 70310
  - 4
    - NDIS hanging during Init I am trying to get an NDIS driver working on our system. During bootup, Device.exe loads the PCI bus driver, which enumerates our network card. It then loads ndis and points it to that card's instance. So far so good. NDIS calls the driverentry in the card's driver, and then calls MiniportInitialize. Both of those complete fine. However, at this point things don't progress any more. My driver continues to get MiniportSetInformation calls periodically and it handles them. But NDIS_Init never completes, which doesn't allow device.exe to load any more devices or complete. Any already initialized devices continue to run, so it isn't a system hang, interrupt issue, exception, or complete device.exe hang. I can use kernel tracker and see that most time is in the idle thread. What can cause NDIS_Init to hang while initializing a card after MiniportInitialize is complete? Thanks, Bryan Tag: Debuging application in emulator Tag: 70308
  - 5
    - SMSC 91C111 in CE 5.0 Has anyone had any success using the SMSC 91C111 in CE 5.0 and not drop packets for a large ping ? Previously, I was offloading the NIC buffers in MiniportISR and passing them to the stack in MiniportHandleInterrupt since the calls to NdisMEthIndicateReceive take so long to copy the data and pass it on. In CE 5.0, it appears that MiniportISR can no longer interrupt MiniportHandleInterrupt, so this approach is failing. Unless I move the unload to the kernel interrupt, I'm not clear how to interface with NDIS and handle a ping with more than four packets. Tag: Debuging application in emulator Tag: 70302
  - 6
    - unable to link lib Hi all, In my bsp, a smartcard drivers wants to link smclib.lib in WINCE420\PUBLIC\COMMON\OAK\LIB\ARMV4I\RETAIL, so I write SOURCELIBS= $(_COMMONOAKROOT)\lib\$(_CPUINDPATH)\smclib.lib in sources file, but occuring the following error : NMAKE : U1073: don't know how to make 'E:\WINCE420\PUBLIC\Project\WINCE420\cup\cesysgen\oak\lib\ARMV4I\debug\smcli b.lib' BUILD: NMAKE.EXE -i -c BUILDMSG=Stop. NTTEST= UMTEST= NOLINK=1 NOPASS0=1 failed - rc = 2 BUILD: Linking e:\wince420\platform\cpu\drivers\scr directory NMAKE : U1073: don't know how to make 'E:\WINCE420\PUBLIC\Project\WINCE420\cpu\cesysgen\oak\lib\ARMV4I\debug\smcli b.lib' BUILD: NMAKE.EXE -i -c BUILDMSG=Stop. LINKONLY=1 NOPASS0=1 NTTEST= UMTEST= MAKEDLL=1 failed - rc = 2 Why does it find smclib.lib in project directory other than $(_COMMONOAKROOT) lib\$(_CPUINDPATH). When I put smclib.lib in wince420\platform\cpu\drivers\scr directory, and write SOURCELIBS=$(_TARGETPLATROOT)\drivers\scr\smclib.lib in sources file, there isn't any error. Thanks! Tag: Debuging application in emulator Tag: 70299
  - 7
    - Problem with USB Bluetooth debug build I am using WinCE PB 5.0 (Eval Edition) with Samsung Arm 2410 I've included the USB Bluetooth support into my Platform using the catalog (drag and drop). When I plug a Bluetooth USB device into my target, I am hitting a DebugCheck in EnterCriticalSection because the critical section is not initialized. VOID WINAPI EnterCriticalSection(LPCRITICAL_SECTION lpcs) { #ifdef DOCHECKCS CheckTakeCritSec(lpcs); #elif defined (COREDLL) && !defined (SHIP_BUILD) if (!vpcs->hCrit || (0xcccccccc == (DWORD) vpcs->hCrit)) { RETAILMSG (1, (L"!ERROR: Calling EnterCriticalSection on a CS (%8.8lx) that is not initialized!\r\n", lpcs)); DEBUGCHK (0); } Here is stack trace of problem. Run gets to USBDeviceAttach. PUBLIC\COMMON\OAK\....\USB\usbdrv.cpp:Function - USBDeviceAttach #if defined (DEBUG) || defined (_DEBUG) || defined (RETAILLOG) gpsynchUsbDevice->Lock(); DebugInit(); gpsynchUsbDevice->Unlock(); #endif IFDBG(DebugOut (DEBUG_HCI_INIT, L"[USB] BTUSB: USBDeviceAttach 0x%08x %s\n", hDevice, szUniqueDriverId)); The DebugOut function is: PRIVATE\WINCEOS\COMM\BLUETOOTH\SYS\btdebug.cxx:Function - DebugOut: void DebugOut (unsigned int cMask, WCHAR *lpszFormat, ...) { #if defined (DEBUG) if (gulZoneMask != dpCurSettings.ulZoneMask) { EnterCriticalSection (&gcs_debug); At this point gcs_debug is not inialized since DebugInitialize (the function that calls InitializeCriticalSection (&gcs_debug);) from that file (btdebug.cxx) is never called. The DebugInit call (in USBDeviceAttach) is from PUBLIC\COMMON\OAK\INC\bt_tdbg.h: inline void DebugInit() { gdwRefCount++; if (!ghInstBTD) { ghInstBTD = LoadLibrary(L"btd.dll"); if (ghInstBTD) { pfnDebugOut = (DEBUGOUT )GetProcAddress(ghInstBTD, L"DebugOut"); pfnDumpBuff = (DUMPBUFF )GetProcAddress(ghInstBTD, L"DumpBuff"); } } } This macro does not link in DebugInitialize. How is DebugInitialize (from btdebug.cxx) to be called? Tag: Debuging application in emulator Tag: 70298
  - 8
    - OID_TAPI_GET_DEV_CAPS and NDISWAN IM driver This is a multi-part message in MIME format. ------=_NextPart_000_000E_01C578D7.F25D7500 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I am testing my NDISWAN IM driver on PPC 2003 and I find a strange = problem after the NDISWAN IM driver is initialized. What I found is that = the upper layer application kept polling the OID_TAPI_GET_DEV_CAPS for = around seven times. When I plugged the USB cable and turn the AciveSync = on, my NDISWAN IM driver kept receiving the OID_TAPI_GET_DEV_CAPS , = which caused the PPC getting into a nonstop loop.=20 Due to the nature of NDISWAN IM driver, it needs not to talk to = hardware directly and it simply forward the requests to the AsyncMac = driver. I really do not know why the application is not happy with the = parameters returned from the OID_TAPI_GET_DEV_CAP. If anybody had such = a problem before, can you tell me what the problem is.=20 The PPC2003 I am testing is=20 SIEMENS SX66 PPC. ------=_NextPart_000_000E_01C578D7.F25D7500 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2900.2668" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY> <DIV><FONT face=3DArial>I am testing my NDISWAN  IM driver on PPC = 2003 and I=20 find a strange problem after the NDISWAN IM driver is initialized. What = I found=20 is that the upper layer application kept polling the  </FONT><FONT=20 face=3DArial>OID_TAPI_GET_DEV_CAPS for around seven times. When I = plugged the USB=20 cable and turn the  AciveSync on,  my NDISWAN IM driver kept = receiving=20 the  OID_TAPI_GET_DEV_CAPS , which  caused the PPC getting = into a=20 nonstop loop. </FONT></DIV> <DIV><FONT face=3DArial>Due to the nature of  NDISWAN IM = driver, it=20 needs not to  talk to hardware directly and it simply forward the = requests=20 to the AsyncMac driver. I really do not know why the application is not = happy=20 with the parameters returned from the  OID_TAPI_GET_DEV_CAP. = </FONT><FONT=20 face=3DArial>If anybody had such a problem before, can you tell me what = the=20 problem is. </FONT></DIV> <DIV><FONT face=3DArial></FONT> </DIV> <DIV><FONT face=3DArial>The PPC2003 I am testing is </FONT></DIV> <DIV><FONT face=3DArial></FONT> </DIV> <DIV><FONT face=3DArial>        = SIEMENS SX66=20 PPC.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <P><FONT face=3DArial></FONT> </P></BODY></HTML> ------=_NextPart_000_000E_01C578D7.F25D7500-- Tag: Debuging application in emulator Tag: 70297
  - 9
    - Problem locating Afxinet.h under some configurations Platform Builder cannot find Afxinet.h when compiling an added application into the Emulator Release image. However there is no problem under the x86 configuration it has no problems. What should I be looking for to locate the issue? Rgds dylan. Tag: Debuging application in emulator Tag: 70289
  - 10
    - CE.NET: Remote Kernel Tracker tool problem Hi, I'm working out test on CE.NET. For some info, I use Remote Kernel Tracker tool. But surprisingly the following situation come out: - when the device IP adress is obtained via DHCP the tool loads OK; - when I specify a device IP adress the tool hangs out. Any ideas of what is going on? Regards, Ognian Tag: Debuging application in emulator Tag: 70287
  - 11
    - Fonts and Licensing Hi, I dont know where else to ask this so I hope someone can help. I need arabic script on CE. For test purposes I have loaded a font file from my development PC and all is fine. However since the fonts that are supplied with the SDK / Platform Builder do not include arabic script I am wondering if there would be a Licensing issue with using the equivalent font file taken from a Windows XP installation - or maybe the reason there is no arabic on CE is simply to save space - not a lisencing issue? I cannot track down any info on this so if anyone has any knowledge of the issues here I would value your input. Rgds Dylan. Tag: Debuging application in emulator Tag: 70283
  - 12
    - CETK Tests for NAND Flash Dear All, I am working on NAND Flash driver for 32 Mbyte NAND Flash. This is an on-board NAND flash. I want to know if the Storage Device Benchmark Tests are applicable to NAND flash. The Platform Builder 5.0 Help file gives the following description for Benchmark Tests :- " The Storage Device Block Driver Benchmark Test analyzes the performance of a storage device in reading and writing. The test scans a storage device and attempts to read from and write to every sector on the device. The test displays information about the time required to complete each operation. You may find it useful to know the time required to complete a read or write operation if you have problems with the file system on the storage device. For example, the test may show you that one disk takes 400 milliseconds (ms) to write, passing the test, while another disk takes 1500 ms to write, failing the test. The following table shows the hardware requirements for the Storage Device Block Driver Benchmark Test. Requirements Description A storage device- A storage device that uses a memory block (DSK) device driver, for example a PCMCIA ATA disk or PC Card. " any clues? Thanks in advance , ms_noida Tag: Debuging application in emulator Tag: 70274
  - 13
    - Cursor Support The on-line help states: â?? To stop the display of the mouse cursor, be sure the SYSGEN_CURSOR variable is not set.â?? But when I remove the OS Core Mouse component that sets SYSGEN_CURSOR, build and test the image, there is still an Arrow cursor that tracks mouse movement. I know that SYSGEN_CURSOR is no longer set because in does not appear in either the sysgensetting.out or __pass1/2.txt files. Does anyone know what is going on here? BTW â?? I am use CE 5.0 on VIA X86 hardware. Tag: Debuging application in emulator Tag: 70254
  - 14
    - usb mass storage client driver I was trying to implement mass storage device on USB function controller driver on Windows CE 5.0. After configuring the registry USB function controller driver for Mass storage class and connected the device, I found that one of the command in mass storage READ_FORMAT_CAPACITY (0x23) was not supported. I got the debug messages as below: UsbMsFn!STORE_IsCommandSupported: ++ UsbMsFn!STORE_IsCommandSupported: command 0x23 UsbMsFn!STORE_IsCommandSupported: unsupported command 0x23 UsbMsFn!STORE_IsCommandSupported: -- UsbMsFn!BOT_HandleCBW: command not supported in the mass storage code i found that there was no implementation of the code for this READ FORMAT CAPACITY command. After this command was not processed, the endpoint was stalled and the bus was reset by the USB host. After I hard coded with the READ FORMAT CAPACITY. there is another problem when i tried to write into the SDMMC card which is the mass storage device. it is failing to write into that SDMMC. and the memory property showing the device has zero memory and zero used space( this is happening when i am trying to write into the mass storage device ). thanks Tag: Debuging application in emulator Tag: 70252
  - 15
    - NDIS Optimized Receive Handling in CE 5.0 Does anyone have any testimonial for this making much of a difference to their performance ? I spent a lot of time trying to get the performance I wanted in CE 4.1 and ended up never being able to get the stack to accept packets with NdisMIndicateReceivePacket and return NDIS_STATUS_PENDING. It always copied the data and returned immediately with NDIS_STATUS_SUCCESS. I'm wondering if this optimized receive handling is now enabling this functionality in CE where a packet might never get copied, but just passed up and down the stack until return to the driver pool with MiniportReturnPacket. Otherwise, what is this optimization and why don't I get it unless I jump through the list of hoops ? Tag: Debuging application in emulator Tag: 70250
  - 16
    - CPU Utilization Changing with Remote Tools Hello, I have a unique problem under WINCE 5.0 I have a network application that seems to be hogging the CPU - It takes up about 60-70% of the processor. This was unacceptable so I started looking into what could be causing the problem. During this debugging process I found something a little confusing ... If I connect the Remote Call Profiler (simply connect, not even launching an app or collecting data - i.e. just having ConPMon.exe running) my App's efficiency all of a sudden drops to an expected value of 10-15% utilization. My first thought was that the Remote Performance Monitor was just reporting the utilization wrong so I ran a TOP like program and it verified this behaviour. I still didn't like it so I hooked a scope up to my board and used the idle routine and a led toggle and sure enough my scope shows the same results. So, I'm left with ConPMon.exe kicking my system into a "good" state. I can disconnect the profiler, restart the app and everything is fine. The system stays in a â??goodâ?? state. This happens if I connect via activesync or a tcp manual cemgr. No other remote tool does this (put system into a "good" state). Moreover, no other tool will remove the system from a "good" state except for the Remote Kernel Tracker. If I try to use the Remote Kernel Tracker all bets are off - the system goes back into a "bad" state and the app runs at 60-70% CPU utilization. Between these two system states the registry is the same. I've tried switching thread priorities and quantum times of my app. With an OS debug build the App runs at around 25% but comparing a retail build to a debug build is a little trickier. I canâ??t seem to find out what constitutes a â??goodâ?? state. I'm leaning toward a socket select call or overall TCP/UDP state causing my problem. The app is pretty simple and only single threaded. ConPMon.exe and my App share the following module linkages: wspm, ssllsp, ws2 (and of course coredll) - all IP "stuff". If anyone is familiar with what might be going on while loading ConPMon.exe and/or the remote kernel tracker and might have some ideas as to what their threads might be changing I would greatly appreciate it. Thanks in advance for you thoughts and advice, Chris -- Chris Kavanagh Software Developer LibreStream Technologies Inc. www.LibreStream.com Unit 200 - 55 Rothwell Rd. Winnipeg, Manitoba Canada R3P 2M5 Tag: Debuging application in emulator Tag: 70247
  - 17
    - SetSystemMemoryDivision kills my display? I'm working on a PXA255-based device. I have two different CE images based on the same BSP, the only difference is in catalog components (one falls into the Core license, one into the Pro license). With one image (Pro) the device boots fine, everything is ok. With the other build (Core), when a call to SetSystemMemoryDivision is made that gives Storage Memory < ~20% of available RAM (not sure exactly the division, but it's around there) then the display goes blank. A scope on the pixel clock shows it has quit running. The OS itself is still running. I believe there's a bug somewhere that is in both, but is only manifesting in one image. I also think the fact the pixel clock is killed is just happenstance, on the other image it's probably stepping on memory less obvious. To make things more interesting, KITL and kernel debugging are not an option right now (don't ask), which is why I've not traced into the call. So my questions actually are: 1. Where does the call to SetSystemMemoryDivision go? 2. What might be causing this? I'm not sure where to even start Ideas? -Chris Tag: Debuging application in emulator Tag: 70242
  - 18
    - Application in PB We've been developing a system using PB4.2 and eVC++ sp4. I occassionally like to go back a review basic things. So in this case, I decided to do the tutorials (things make much more sense now!). Question - It seems that programs could be developed right in PB. Hence, what significant advantages does eVC++ give me (besides that I can create an SDK for others to develop program sin eVC++)? Just trying to gain more insight... Tag: Debuging application in emulator Tag: 70241
  - 19
    - ANN: BSP Consultant Needed We have an immediate need for a consultant to assist in the development of a BSP for a custom FreeScale i.MX21 device (utilizing an existing FreeScale BSP as a base). The estimated need would be for approximately 3 months. We would prefer an on-site scenario, but will consider off-site. If interested please respond to hr at sturdycorp dot com Tag: Debuging application in emulator Tag: 70238
  - 20
    - PXA27x / IXP4xx CE5.0 BSPs production readiness? What are the thoughts out there on how "production ready" the shipped CE5.0 BSPs are for the Intel IXP425 and PXA270? We are contemplating a new development with one or other of these processors and will run CE 5.0. MS say that they have put a lot of effort into ensuring that the BSPs for 5.0 are really production ready. We found that it took a lot of work to get the CE .NET 4.2 BSP for the PXA255 to the state where we considered that it was ready for shipping. Is it just as hard for these BSPs or have MS/Intel done what they say? Thanks for all comments, Andrew. Tag: Debuging application in emulator Tag: 70220
  - 21
    - OEM ADDRESS TABLE hello, I am developing a BSP using wince 5.0,can any one explain what is OEM ADDRESS TABLE. Tag: Debuging application in emulator Tag: 70219
  - 22
    - Issue: netcard driver with hive-based registry in Gateway Platform Hi all, When i build a platform on gateway without hive-based registry streaming, ping, network copying, rest of the applications work fine when i build a platform on gateway with hive-based registry streaming, ping keeps working fine but when network copy is given the following error message is displayed on the host machine connected to gateway. [ cannot copy xxx(filename): The specified network name is no longer available ] and then on the netcard driver no longer performs any operation. To be specific Gateway stops working. When our netcard driver was benchmarked with RTL8139 ethernet driver with hive-based registry enabled and streaming, ping along with network copy was run we observed the similar message on host m/c [ cannot copy xxx(filename): The specified network name is no longer available ] but rest of the applications continued to perform and the Gateway continued to work fine. This observation is found with hive-based registry enabled for without hive-based registry out netcard works fine with all applications(streaming, ping, network copy..etc) following is the hive-based registry entry in platform.reg ; @CESYSGEN IF FILESYS_FSREGHIVE ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\init\BootVars] "DefaultUser"="user" "SYSTEMHIVE"="Documents and Settings\\system.hv" "PROFILEDIR"="Documents and Settings" "Start DevMgr"=dword:1 "RegistryFlags"=dword:1 ; END HIVE BOOT SECTION ; @CESYSGEN ENDIF FILESYS_FSREGHIVE The storagemedia for hive files we are using is either NAND/NOR/ATA-HardDisk you'r valuable suggestions will be of great help Thx, Best Regards, James Tag: Debuging application in emulator Tag: 70218
  - 23
    - PXA-255 reference boot loader source required Hello, I am working on Porting WinCE on a PXA-255 based custom board. I need some reference source for the boot loader. Our board does not have ethernet support. Any pointer / reference would be of helpful. Thanks and Regards Arun Tag: Debuging application in emulator Tag: 70216
  - 24
    - UDC performance on PXA270 Hi. Could someone please share his experience with PXA USB client controller + windows xp sp2 host? I'm not able to reach more than 250KB/s on RNDIS. Other USB function drivers seem to be even slower (eg. USB Serial). So what is the highest speed everyone ever seen on Wince 5.0 on XScale and Windows XP on the host side? It seems to be a strange speed limit of 250KB/s ... Do not understand is it windows xp jokes or PXA270 USB function driver on device, or RNDIS driver itself. Please shed some light on the problem. Thanks. Tag: Debuging application in emulator Tag: 70215
  - 25
    - DirectDraw Hi All I want a very basic DirectDraw enabled display driver, as there is no h/w accelerator present in my system. For this, can i just make use of ddgpe.lib functions and do not implement the halpalette.cpp, haldd.cpp & halsurf.cpp in my platform? Thanks, Tag: Debuging application in emulator Tag: 70214
- Next
  - 1
    - Mass Storage USB Function Driver on PXA27x Working! (Almost) Hi all, I just started to test the USB Mass Storage Function Driver (CE 5.0) on our PXA27x platform a few days ago. At first nothings seemed to work. I installed the latest QFEs (Till Q1 2005), and fixed the whole Cable Detct routine. Now when I connect to my Notebook I get a "Stall send on In Endpoint = 0x1", followed by a 10-20 seconds timeout, then a Stall again. But after some (usually 2-3) loops the Mass Storage device is detected correctly and mounted. Then it works stable for reads and writes. The interesting thing is that if I enable the "Transport" debug zone int the USB function driver, the mass storage is recognized immediately, without stalling. I suspect there is a timing problem somewhere. Another strange thing: if I loopack the USB fucntion with the USB Host on our CE platform the USB mass storage disk is never detected correctly. I get the following Debug Messages in an infinite loop: BOT_DataTransfer error(5.3.3, dwCswErr:1460, dwUsbErr:0x0, dwTimeout:4000) Retry CSW But maybe this is a problem with the USB Mass Storage Client driver on the Host side (I had some problems with other USB mass storage devices in the past) I know there should be some fix available from Microsoft, but I cannot wait much longer. Does anyone know when the fix will be available? Or maybe someone knows how to solve the problem? regards, Germano Kern Toradex www.toradex.com Tag: Debuging application in emulator Tag: 70209
  - 2
    - power management issue of WinCE 5.0 Hello, We are getting the problem about power management in the WinCE 5.0. The OS and its entire software stacks cannot recover after going to suspend state. The same problem is mentioned by the Intell in the release note of "830DSTB WinCE 5.0 BSP V3.0". Thay allready fixed this problem in this BSP version. But thay didn't mentioned that how we can overcome this problem. Let me know if anybody knows something about this. Thanks Sanjeev Tag: Debuging application in emulator Tag: 70207
  - 3
    - flash write problem Dear all The configuration of my platform is : CPU: sumsang 2410 Flash: K9F1208 64MB SDRAM: micron 64MB OS : wince4.2 My NK.NB0 is 29M in flash. Now,I want use rest flash as "hard disk" directory to write file. I add NAND_FLASH driver and FAT fs, but no "hard disk" or else directory . How can I do? Thanks Tag: Debuging application in emulator Tag: 70203
  - 4
    - How do I include the CETK dlls in an emulator image? I'm trying to connect the CETK to my emulator image. I have the image running okay and telnet in. when I execute this line: CEMGRC.EXE /T:TCPIPC.DLL /Q /D:192.168.1.23:2670 I get: Cannot execute CEMGRC.EXE I'm assuming I have to inlude the CE remote tools in my emulator image. How would I do that? (I have done a "viewbin -t NK.bin" and do not see the CEMGRC.EXE in the image, so I'm sure it's not in my image) Tag: Debuging application in emulator Tag: 70197
  - 5
    - What's in an SDK? Do you need one if Platform Builder is on the same machine? If you generate an SDK with platform builder, then just install it on the same machine, could you just skip the SDK, use the standard SDK, and use lib and include paths to point into the platform directories to get headers and libs? The reason I ask is that so far we have had a lot of trouble re-creating our 4.2 projects in the 5.0 IDE. It seems MS has removed a lot of functionality in order to only support the command line. So far there's been a learning curve (where are my menu options, where are my settings), plus some apparent bugs (have to create an new empty .def file if you rename the output), plus apparent compiler\tool differences (3.0 and 4.2 could compile STLPort, but 5.0 seems to have some problems... but eVC does not... even though apparently eVC with SP4 is same compiler as PB 5.0).... so we were going to try just using eVC, but then you have to create an SDK... this is an rather long extra step it would be nice to do without if we just can "repoint" eVC at the platform directories. Andrew Tag: Debuging application in emulator Tag: 70184
  - 6
    - What's in an SDK? Do you need one if Platform Builder is on the same machine? If you generate an SDK with platform builder, then just install it on the same machine, could you just skip the SDK, use the standard SDK, and use lib and include paths to point into the platform directories to get headers and libs? The reason I ask is that so far we have had a lot of trouble re-creating our 4.2 projects in the 5.0 IDE. It seems MS has removed a lot of functionality in order to only support the command line. So far there's been a learning curve (where are my menu options, where are my settings), plus some apparent bugs (have to create an new empty .def file if you rename the output), plus apparent compiler\tool differences (3.0 and 4.2 could compile STLPort, but 5.0 seems to have some problems... but eVC does not... even though apparently eVC with SP4 is same compiler as PB 5.0).... so we were going to try just using eVC, but then you have to create an SDK... this is an rather long extra step it would be nice to do without if we just can "repoint" eVC at the platform directories. Andrew Tag: Debuging application in emulator Tag: 70182
  - 7
    - Sample App Programm to Play Sample DirectShow Ball Filter Is that available somewhere? It seems all the DShwo app samples are just smart players to play media files. Sorry, I am really new on DShow development. Thanks in advance. Best. Rui Tag: Debuging application in emulator Tag: 70181
  - 8
    - Problem seeing OutputDebugStrings output from CE 5.0 target Hello All, I have created a device driver for my CEPC system, which I have included in the sysgen, along with registry entries to automatically load my driver on bootup. Over the course of my XXX_Init() routine, I call OutputDebugString() a number of times to send debug output to the debugger (PB 5.0); and I believe the XXX_Init() is indeed being called, becaused my driver appears in the "gi mod" list. However, I never see the debug statements. What might be the problem? More Specific Info on my configuration: 1] I am using Platform Builder 5.0 to attach to the device and download the image. This process works successfully. 2] As noted, the command "gi mod" shows my device driver among the other modules. My driver is also listed under the builtin/active registry key. I take these signs to indicate that my device driver is being loaded, and that my XXX_Init() routine is being called. Is this a valid assumption? 3] I am looking for the output from OutputDebugString() in the "debug" pane of the Platform Builder environment. Is this where it should appear? [I also checked the terminal showing the bootup serial output, and the debug statements do not appear there, either.] 4] I am using the "release" build of the CEPC system (since the debug build had errors during the sysgen). Would this affect whether the debug strings are displayed? I am inclined to think that it would not, especially since I do see debug statements from other drivers in the system (such as the keyboard layout driver). Sincerely, Avi Shmidman Jerusalem, Israel Tag: Debuging application in emulator Tag: 70160
  - 9
    - May be a IE bug ? Hi all: My Platform: 64MB SDRAM,32MB FLASH,PXA270,HDD(20GB), CE 5.0. Use IE to download a file(size 700MB) from a FTP server, then message box show "There is not enough free storage space.Delete one or more files to free storage space,and then try again." . But the IE Cache location has been setted to hard disk,setting as following: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders] "Cache"=" \\IDE Hard Disk\\Profiles\\guest\\Temporary Internet Files" But seems no use. Tag: Debuging application in emulator Tag: 70150
  - 10
    - ActiveSync compatibility with CE 5.0 Hi, We are developping a new Windows CE 5.0 platform. This device has an internal flash to store data. Also, this platform has an Ethernet port. We want to use the free ActiveSync software to extract data from the device to the PC. The ActiveSync software support the Ethernet connection (Very fast to upload/download data). We want to inform our client to download ActiveSync from our web site or the microsoft web site. The question is: Does futur version of ActiveSync (3.8, 4.0, etc...) wiil be always compatible with Windows CE 5.0.? It be a very important issue because we can't tell our client to "remove his new ActiveSync" to return to an old ActiveSync version to keep the compatibility with CE 5.0 Thank you Alain Roberge Tag: Debuging application in emulator Tag: 70142
  - 11
    - Firewire storage on CEPC Hi all, I can't get a specific Firewire storage device (CompactFlash card in an external Firewire adapter) to be recognized. My platform is a Windows CE 4.2 .NET CEPC on a VIA Eden & Prosavage/ Twister based device. A standard external Firewire to IDE adapter works fine with an IDE hard disk with FAT file system. What do I have to check to verify that my hardware can or can't work with CE? thanks in advance Marc Tag: Debuging application in emulator Tag: 70141
  - 12
    - Can I directly put files into ResidentFlash in platform.bib ? Hi, I know I can use platform.bib to add our files to windows directory of device. I know I can use platform.dat to copy file to another director of device. I have a "ResidentFlash" that is FAT format in my device. Howerver, I have some questions: 1) Can I specify different target directory of device in platform.bib ? 2) Can I directly put files into ResidentFlash in platform.bib ? Thanks. Yu. Tag: Debuging application in emulator Tag: 70139
  - 13
    - dll load address hi all! I'm trying to read the dll import table using a pointer initialized to modBaseAddr field of the structure MODULEENTRY32 filled by the Toolhelp api but as I read the first byte pointed by this pointer, the system throws an access violation exception how can I read the memory where the system loads the dll linked by my process ? If I open remote process viewer , for example the coredll.dll is linked by many processes, but the displayed Base Addr is the same for all processes.....what is meaning? maybe this base address is valid only for the kernel ? how can I get a valid address for my calling process ? best regards Marco Tag: Debuging application in emulator Tag: 70137
  - 14
    - ARM Developer Suite and WinCE 4.2 Hi, I am using ARM Debugger to develop a RAM Based eboot. (Just for testing purpose no other intention). Using the debugger i am able to downlaod a RAM WinCE 4.2 OS Image and jump there. FYI, I tested this using a Eboot in Flash Memory. Since my flash chip gone bad i am doing this using a SDRAM Eboot. But, when i jump there my ADS is loosing the control on the Target. I could see that after completion of OS downlaod it is just jumping to the SDRAM no reset in WinCE code AFAIK. Infact, it saying that a "Dead Target" and giving a message as target may be needed to restarted. Can anyone please suggest ? Thanks & Regards, Peter Tag: Debuging application in emulator Tag: 70135
  - 15
    - where to find mfcce300.dll? Hi,all Where can I find mfcce300.dll and olece300.dll(x86 version) to download? I've searched on google but in vain. Would someone send them to me? My email address is mileswang2000 at sina.com, it's an emergency! Thanks! maverick Tag: Debuging application in emulator Tag: 70129
  - 16
    - Ndis wlan driver porting, ISR and dma issues Hi, I am porting a XP NDIS 5.1 wlan driver to WinCE 5.0. My platform is CEPC The wlan device is a PCI device. I use ethernet for download and kitl for debug messaages 1) When I register the interrupt using NdisMRegisterInterrupt it succeeds with irq 9 and sysintr 18 assigned. But the os crashes immediately after that with access violation exception. The source of crash is tough to find since the debug messages and call stack are not consistent. From the available debug messages it appears that there is no irq conflict. The miniportisr never gets called hence i am suspecting that registering the isr or irq is a issue here. If i dont register the interrupt the driver loads completely and is stable but obviously no interrupts will be handled. I am thinking of using installable isr since the interrupt might be shared and since the driver uses the wlan chip register to detect the interrupt. 2) The original driver in windows uses mapregisters for dma operation. since mapregisters are not supported in CE how can the dma operation be achieved. Can anyone please help with the above issues. Regards Vijay Tag: Debuging application in emulator Tag: 70128
  - 17
    - TI PC Card driver + CISCO Aironet 340/350 PCMCIA WLAN Card Hi all, I am developing Windows CE 5.0 on x86 Platform. I uses the TI PC Card driver in Platform Builder for Ricoh 475II (one slot). This driver perform well with ATADISK and NE2000 ethernet card. But only CISCO Aironet 350 can't work, and I am sure I add CISCO driver into my image. I show some debug message below. If anyone is able to help I would greatly appreciate it. Thanks, Jacky I found that it couldn't get PCMCIA register address, and stop at get bfuncID ==DEBUG MESSAGE== 84123 PID:c3b9ffba TID:3a0dcd2 0x83a0da40: CPCPcmciaCard::GetConfigureRegisterBase: Can't get PCMCIA register address. return FAILS 84135 PID:c3b9ffba TID:c39f2802 0x83925cc4: GetCardCRC: CardGetFirstTuple returned fails 84140 PID:c3b9ffba TID:c39f2802 0x83925cc4: PCCARD: DEBUGCHK failed in file E:\macallan\public\COMMON\oak\drivers\pccard\mdd\mdd_both\..\pcmciaen.cpp at line 662 Tag: Debuging application in emulator Tag: 70126
  - 18
    - How to change the default Background Image? Hi, I'm using PB5.0 to customize out product, I want to change the default background image to put up features of our company, how can I? Best regards, Jack Tag: Debuging application in emulator Tag: 70124
  - 19
    - removing Unfilled ROM holes is it possible? and why do they exist in the first place... ? i am in a tight memory environment..... 8K means a lot to me now. BUILD: [01:0000000092:INFO ] Unfilled ROM holes (address, length): BUILD: [01:0000000093:INFO ] 80024010 4080 80023358 3240 80021af8 1288 BUILD: [01:0000000094:INFO ] total space 8608 in 3 ranges Tag: Debuging application in emulator Tag: 70123
  - 20
    - removing the 4K jump in eboot start up code? hi i am porting my system from nor flash to nand flash, and the XIP block of the nand flash is very limited so i want to safe space by cutting the 4K jump in eboot. is it possible? i remember someone posted info about it but i couldn't find it in google. thx Tag: Debuging application in emulator Tag: 70122
  - 21
    - RDP Printers Disable winCE5.0 hi~all i develop thin client shell in winCE5.0 Using WinCE5.0, Thin client RDP Printers is always disable. But WinCE 4.2 thin clientâ??s thin client RDP Printers is able. (or disable) I want to select Printers. But, In Windows CE 5.0 Thin Client, it is disable. Alwaysâ?¦ Do you have solvent to the problem? Tag: Debuging application in emulator Tag: 70121
  - 22
    - RDP Printer Disable in Windows CE 5.0 Hi~ I am developer windows CE 5.0 IN KOREA. To develop thin client shell. but RDP Printer is disable. i don't know the solvent. Tag: Debuging application in emulator Tag: 70119
  - 23
    - how to disable the destop window, as only the application window run. hi all. aming using the pb42 to customize our product. As i need only the application run after the CE boot. That mean no desktop window is appeared before the application window run. how can i? thanks in advance. Tag: Debuging application in emulator Tag: 70114
  - 24
    - ROMOFFSET HELLO, what is the significance of ROMOFFSET in boot.bib, can anyone explain what it actually does Tag: Debuging application in emulator Tag: 70112
  - 25
    - An NDIS intermediate driver issue. Can I build a NDIS intermediate driver on WinCE 5.0 and install it on Windows Mobile 2003? Can this NDIS driver be loaded by the OS? Tag: Debuging application in emulator Tag: 70109

Hi,
I'm debuging applications in EVC4.0, emulator version. There's lots of
dll's need by my application, so every time when I run the emulator, I have
to copy all these dll's into the emulator machine at first(through sharing
folder).
Is there any simple method to load all these dll's into emulator? or
build into it fixedly!

Best regards,
Jack

Top