Debug Message Format

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Platform Builder 5 newbie question Hi! I can choose: Sysgen Build and Sysgen Build and Sysgen current BSP When do I choose each of these? Some experimenting shows that I have to do Sysgen the first time for a new platform, will Build and Sysgen current BSP suffice after that? Best regards, Fredrik Jansson Tag: Debug Message Format Tag: 86268
  - 2
    - Process Model "225bytes" in 2540N? Hi all, I read Windows CE Training Course 2540N and found one statement that I don't understand. It said (in Module 2-1): Virtual Address Slots 32 MB (225 bytes) of virtual address space per slot What does 255 bytes mean? Thanks in advanced, Brian Tag: Debug Message Format Tag: 86266
  - 3
    - How to let a thread be idle without using system call ? Hi, I do not want to call system call( ex: sleep) in our power handler functions. Without using system call, is there any other method to let thread be idle and release the CPU resource to other threads? Thanks. Yu. Tag: Debug Message Format Tag: 86250
  - 4
    - Power Handler function yield to low priority thread Hi, In our SD driver, I hope suspend/resume will not interrupt SD read/write. Hence, I wrote my code as following: ----------------------------------------------------------- Part 1: SD read/write code snippet EnterCriticalSection() // codes to read/write SD card LeaveCriticalSection() Part 2: SD power handler function DSK_PowerDown(void) { EnterCriticalSection() .... } DSK_PowerUp(void) { LeaveCriticalSection() .... } ----------------------------------------------------------- BUT, I found the following debug message: ERROR: Power Handler function yield to low priority thread. Is it a "ERROR"? Does it mean system is dangerous and unstable? How to solve this issue ? Thanks. Yu. Tag: Debug Message Format Tag: 86249
  - 5
    - CEPC with 1 GB RAM -> Backlink=0048 Hello, my Windows CE 5.0 image works well on all our CEPC x86 devices with up to 512 MByte Ram. For development reasons I would like to use a CEPC with 1GB RAM (I know this is not supported by Windows CE so I would like to use 512MB of the 1GB > only for development). If I boot my Windows CE 5.0 image on this CEPC I get a Backlink=0048 error. I do not know why it is not booting and using only 512MB RAM ... My OEMAddressTable: ; RAM 0x80000000 -> 0x00000000, size 512MByte dd 80000000h, 0, 20000000h ; Last entry, all zeros dd 0, 0, 0 In x86InitMemory I call IsDRAM with dwRAMAutoDetectSize=0x20000000: MainMemoryEndAddress += IsDRAM (MainMemoryEndAddress,g_dwRAMAutoDetectSize); (I have removed the if (MainMemoryEndAddress == g_dwRAMAutoDetectStart) ...) My Debug Output: 0 PID:0 TID:0 CEPC Firmware Init 0 PID:0 TID:0 RTC - Status Reg B - 0x02 0 PID:0 TID:0 g_dwCPUFeatures = a7e9f9bf 0 PID:0 TID:0 g_nMtrrCnt = 8 0 PID:0 TID:0 MTRR PhysMask0: 0000000fc0000800 0 PID:0 TID:0 MTRR PhysBase0: 0000000000000006 0 PID:0 TID:0 MTRR PhysMask1: 0000000ffff00800 0 PID:0 TID:0 MTRR PhysBase1: 000000003f700000 0 PID:0 TID:0 MTRR PhysMask2: 0000000fff800800 0 PID:0 TID:0 MTRR PhysBase2: 000000003f800000 0 PID:0 TID:0 MTRR PhysMask3: 0000000f00000000 0 PID:0 TID:0 MTRR PhysBase3: 0000000000000000 0 PID:0 TID:0 MTRR PhysMask4: 0000000f00000000 0 PID:0 TID:0 MTRR PhysBase4: 0000000000000000 0 PID:0 TID:0 MTRR PhysMask5: 0000000f00000000 0 PID:0 TID:0 MTRR PhysBase5: 0000000000000000 0 PID:0 TID:0 MTRR PhysMask6: 0000000f00000000 0 PID:0 TID:0 MTRR PhysBase6: 0000000000000000 0 PID:0 TID:0 MTRR PhysMask7: 0000000f00000000 0 PID:0 TID:0 MTRR PhysBase7: 0000000000000000 0 PID:0 TID:0 PhysMask0: 0000000fc0000800 0 PID:0 TID:0 PhysMask1: 0000000ffff00800 0 PID:0 TID:0 PhysMask2: 0000000fff800800 0 PID:0 TID:0 PhysMask3: 0000000f00000000 0 PID:0 TID:0 PhysMask4: 0000000f00000000 0 PID:0 TID:0 PhysMask5: 0000000f00000000 0 PID:0 TID:0 PhysMask6: 0000000f00000000 0 PID:0 TID:0 PhysMask7: 0000000f00000000 0 PID:0 TID:0 g_nMtrrInuse = 3 1 PID:0 TID:0 Double Fault -- backlink=0048 1 PID:0 TID:0 TSS=835973e0 EIP=80263cc8 Flags=00210086 1 PID:0 TID:0 Eax=00000000 Ebx=80241744 Ecx=03bb0045 Edx=00000000 1 PID:0 TID:0 Esi=c0020000 Edi=835b5780 Ebp=80241738 Esp=80241688 1 PID:0 TID:0 CS=0019 DS=0040 ES=0040 SS=0021 FS=0000 GS=0000 As mentioned above my image works well until I use 1GB RAM. Regards Peter Tag: Debug Message Format Tag: 86245
  - 6
    - CESH/Remote Tools and Account Permissions Hi, My Windows account is not an administrator, but rather a user. When I try to run any of the remote tools (remote registry editor for example) I get the following error: "The CESH Server for Windows CE reported the following error: Unable to establish a connection with the device. Please check server configuration settings." The error does not occur if I log into my machine using the administrator account. So I assume it is a permissions/privilege problem. Does anyone know what permissions/privileges need to change in order for the remote tools to work? I'm using CE5. Thanks, Chris P.S. Please don't just tell me to run as admin...that's a lame solution and should not be necessary. Tag: Debug Message Format Tag: 86236
  - 7
    - How do I get PB WinCE 4.2? Skinnable UI? I am trying to figure out the best way to give a Win CE 4.2 app an XP look and feel. I need to make the buttons appear with the XP skin. I have surfed the web and found that I need to employ the use of the SKINNABLEUI folder, but when I look for it on my device, it does not appear. What am I missing? Do I need to download something? Thanks. Tag: Debug Message Format Tag: 86228
  - 8
    - Viewing the catalog database In my \WINCE500\PUBLIC\COMMON\OAK\CATALOG\DATABASE directory I have two databases: pbdb.mdb and base_pddb.mdb. I assume that they contain the various list of SYSGEN's and corresponding descriptions. I would like to compile a list of these descriptions, but I can't open the database because it's password protected. (I don't know why it needs a password, but that's not the point of my post.) I can get a SYSGEN list from a command prompt, and I can get a list of component descriptions from the platform .log file, but there's nowhere that I can think of where I can get a list of corresponding SYSGEN's *and* their descriptions. Could someone who knows the DB password please email it to me? Or send me a way to extract the data from the DB? It would be much appreciated, and I would feel better about doing it this way than using one of the many Access password "recovery" tools out there. Best regards, Dan. Tag: Debug Message Format Tag: 86218
  - 9
    - Touch screen problem in CE50 I have installed DMC touch screen (TSC-10 USB controller) into evalue 5410 x86 PC with CE4.2 and it works fine. When I do the same (with updated driver from touchbase) in CE50 in evalue 3512 or 5510 it does not work USB mass storage, USB to serial converter and USB mouse works so USB drivers and functions are available in CE50 When I connect same touch screen device into CE42 PC it works, so touch screen HW and USB interface works Remote process viewer shows that device.exe loads TBUPDDCE.DLL at boot time and TBUPDDCEUSB.DLL when I connect the touch screen and unloads it when I disconnect the touch screen Everything looks good but there is no response for touching display in CE50 ????? Tag: Debug Message Format Tag: 86205
  - 10
    - Question about bootloader memory map Hi, I was going through the code for S3C2410 bootloader. In that first 8MB of memory is being mapped twice. Once from 0x30000000 to 0x80000000 and one is direct mapping. Is it mandatory to map this memory twice. If so, what is the reason. Ex: ; Comment: ; The following loop is to direct map RAM VA == PA. i.e. ; VA == 0x30XXXXXX => PA == 0x30XXXXXX for S3C2400 ; Fill in 8 entries to have a direct mapping for DRAM ; ldr r10, =PTs ; restore address of 1st level page table ldr r0, =PHYBASE Any leads in this reagard will be grateful. With Thanks and Regards, Naveen Atmakuri. Tag: Debug Message Format Tag: 86202
  - 11
    - Legacy driver in windows 5.0 Hi All, I am developing a pcmcia client driver in widows CE 5.0. Its . And am following the legacy method. From platform builder documnetation it sees that function CardMapWindow is obselete.If this function is obselete which function I have to use? Is it CardMapWindowPhysical? But when I tried to call the CardMapWindow from xxx_init of my driver it returned success. and I was able to read one of the register in my Card successfully. Strange thing is that CardMapWindow was not succes (returned NULL) when it was called from the xxx_open function of driver. Can any one help me to understand the problem? regards Bijesh VM Tag: Debug Message Format Tag: 86201
  - 12
    - NET CF 2.0 for PB Hello all, I'm trying to find the install for .NET Compact Framework 2.0 for Platform builder. I found Mike Hall's blog (http://blogs.msdn.com/mikehall/archive/2005/10/28/486358.aspx) where he describe howto download "Windows CE 5.0 Platform Builder Update 051027_KB904260" and install. But the link is broken. Now I've found this link to a download called .NET Compact Framework 2.0 Redistributable (http://www.microsoft.com/downloads/details.aspx?FamilyID=9655156b-356b-4a2c-857c-e62f50ae9a55&displaylang=en) and wondering is that the same? If not, does anybody know the link to download NET CF 2.0 to add to Platform builder. Best Wishes, Farek Tag: Debug Message Format Tag: 86196
  - 13
    - IP Conflict Problem Hi, When wince detect ip conflict, the ip will be changed to 0.0.0.0. Is any method can avoid this problem? I need the static ip address always turn on for some special situation. Thanks! BR, Hank Tag: Debug Message Format Tag: 86192
  - 14
    - Network issue windows CE 4.2 We have a custom platform very closely related to CEPC that has been in production and working well for some time now. It uses CE 4.2 and has QFEs up to and including Dec '05 applied. What we have discovered in our lab is that if the system is left idle for a long period of time (probably greater than one day) network connectivity is lost. Under the failure mode we can still "ping" the system but we are unable to use FTP or connect any of the TCP/IP devices that are peripheral to the main system. Note that even during the idle time our networked peripherals use a "keep alive" to test for the presence of the server. Also, in the failure mode the peripheral devices eventually (by design) attempt to BootP to resolve their loss of connectivity and this BootP also fails. The BootP server is on the CE device. Has anyone else experienced this or a similar issue? Sid. Tag: Debug Message Format Tag: 86185
  - 15
    - CETK Ellipse/RoundRect Has anyone had problems and resolved them in the CETK gdiapi tests for Ellipse (205) and RoundRect(215) in CE 5.0 ? I know they accept a percentage error, but I thought that if EmulateLine drew both copies, they would always be the same. My pxa255-based 5-6-5 16-bpp driver is failing about every third time on ~4 pixels which is above the .005% error for quater vga. Like I said, I thought the internal EmuldateLine would draw the exact same circle for my driver and ddi_test, but that evidently isn't true, but I can't seem to figure out why. Tag: Debug Message Format Tag: 86179
  - 16
    - GIISR question, Help me please The giisr dll is used to handle the sharded interrupt. Just like USB ( > 1 port ), PC Card ( > 1 port ).... Multiple SysIntr mapped to one IRQ. The procedure is 1. request Sysintr 2. loadintChainHandler 3. KernelLibIOControl 4. InterruptInitalize If the system interupts are 30, 31 and the IRQ is 19. Can I do this? SysIntr : 30 LoadIntChainHandler( L"GIISR_1.DLL", ..... ); KernelLibIOControl( ..., &GIISR_INFO_1, ....); SysIntr: 31 LoadIntChainHandler( L"GIISR_2.DLL", ..... ); KernelLibIOControl( ..., &GIISR_INFO_2, ....); Tag: Debug Message Format Tag: 86165
  - 17
    - Help!! GIISR Queston.. confuse me a long time The giisr dll is used to handle the sharded interrupt. Just like USB ( > 1 port ), PC Card ( > 1 port ).... Multiple SysIntr mapped to one IRQ. The procedure is 1. request Sysintr 2. loadintChainHandler 3. KernelLibIOControl 4. InterruptInitalize If the system interupts are 30, 31 and the IRQ is 19. Can I do this? SysIntr : 30 LoadIntChainHandler( L"GIISR_1.DLL", ..... ); KernelLibIOControl( ..., &GIISR_INFO_1, ....); SysIntr: 31 LoadIntChainHandler( L"GIISR_2.DLL", ..... ); KernelLibIOControl( ..., &GIISR_INFO_2, ....); I mean the installed ISR are different but the IRQ is the same. Tag: Debug Message Format Tag: 86163
  - 18
    - .net CE vs WM determination Perhaps this is a question for another group, but I'll start here. I have a CE 5.0 based unit which I was trying out the sample .net cf v2.0 solution, sliderpuzzle, which MS has out on the .NET CF site. When I compiled and deployed, I selected PocketPC 2003 as my system to deploy to and it used the activesync connection to put down the project files (the .exe and .jpeg needed for the project) and then put down system_SR_enu_wm.cab into \windows and tried to install the .cab file. Problem is the _wm .cab file is evidently for windows mobile. There was a non-_wm version which I manually copied to the unit and installed fine. Once the file was installed, VS2005 didn't try to reinstall it, and therefore the deployment worked with zero errors. What I'd like to know is how to get VS2005 to choose the correct file in the first place. Its not a windows mobile device and I didn't choose a windows mobile device to deploy to (at least it wasn't labeled that). I didn't see any options in VS2005, but I also didn't have a specific SDK for this device loaded. Tag: Debug Message Format Tag: 86158
  - 19
    - Trouble in Multi-Master I2C on PXA27X Dear Sir, I use PXA27X and WINCE 5.0 to develop my project. In my HW design, system have 2 I2C-Master device and 3 I2C-Slave device. I2C-Master : PXA27X , Charger IC I2C-Slave : Microprocessor x 2 , Battery IC In Bootloader , I enable I2C and let bootloader go into a loop. In the loop , I send I2C command to Microprocessor forever. After a long test , the I2C will hang up and SCL pull High , SDA pull Low. I try to re-init the PXA27X I2C Mudule , but SCL still pull High , SDA still pull Low. I guess the I2C collision between PXA27X and Charger IC. How should I do ? ~~>_<~~ The following is my I2C code. Should I notice any thing? Do anyone have idea about this issue ? BR, dirwdirw.tw Tag: Debug Message Format Tag: 86154
  - 20
    - USB Host Controller Documentation Hi, I am testing USB drivers, but the documentation of USB is missing in CETK tests list in WinCE 5.0 documentation. Can any one provide me with USB docs for CETK testing. Rgds Murali Tag: Debug Message Format Tag: 86150
  - 21
    - Bug in physmem.c? Hello experts This is not an easy one... My system crashes and I found that this is due to an error in physmem.c. Maybe someone can confirm this to be a bug or someone can tell me what am I doing wrong. My system has RAM from 0x30000000 to 0x31000000 and from 0x40000000 to 0x41000000. GetContiguousPages gets called with parameters (1,0,0) and as a result in pfi it gets the following values: pfi->paStart = 0x31000000 pfi->paEnd = 0x31000000 pfi->paRealEnd = 0x31000000 pfi->pUseMap = 0x81000000 This leads to ixTotal = 0. There is no memory at 0x31000000, so this may be correct, but the following loop for (ixStart = 0; ixStart <= (ixTotal - dwPages); ) { is now an endless loop (with dwPages=1), because all variables are declared as uint!!! The next thing I see is that when ixStart=0x7ff, the loop calls Phys2Virt with an address of 0x317ff000, which gives NULL, because this is not a valid address. Anyway GetContiguousPages doesn't test the result for NULL and calls KCall with this invalid address. The system halts and KCall doesn't come back! Maybe I did something wrong, so here is my OEMAddressTable: OEMAddressTable ;;;------------------------------------------------------------- ;;; Virt Addr Phys Addr MB ;;;------------------------------------------------------------- DCD 0x80000000, 0x30000000, 16 DCD 0x81000000, 0x40000000, 16 DCD 0x88000000, 0x10000000, 16 DCD 0x8c000000, 0x20000000, 16 DCD 0x8d000000, 0x70000000, 4 DCD 0x91000000, 0x00200000, 1 DCD 0x92000000, 0x00300000, 1 DCD 0x9ff00000, 0xfff00000, 1 My device is a PB5.0 custom device on ARM9. TIA -- Michael Reim reim AT helmut-fischer DOT de Tag: Debug Message Format Tag: 86149
  - 22
    - PDFViewer open a specific page Hello, I would like to open a specific page of an existing PDF file. At the moment I can only open the first page of the PDF file using this command line: pdfviewer <filename> Is there another command line option available? Regards Peter Tag: Debug Message Format Tag: 86144
  - 23
    - 'Paint' in WinCE?? Hi, does anyone know if there is 'Paint' software or its equivalent for WinCE? Can't seem to find it in Platform Builder to add to the OS Design. Any help would be much appreciated! ...Reena Tag: Debug Message Format Tag: 86139
  - 24
    - Windows CE 5.0 Prism Wireless Card Dear users, I have a serious problem with my build of ce 5.0 and the prism drivers. It sometimes happens when i give the terminal a static ip and then reboot it , it is impossible to change the ip again. only by defaulting it i can change it again. i tryed removing the zeroconfig out of my register but that also did not help. hopefully any of you users have any idea. Regards, Nick Jamont Tag: Debug Message Format Tag: 86137
  - 25
    - pxa270 MainstoneIII camera drivers problems HI! i am trying to interface a camera module to the pxa270 i got problems about the MainstoneIII BSP camera drivers i can't find herader file (cs.h csmedia.h) in Wince5.0 driectory and MainstoneIII BSP Camera driver use this header files ... i want to header files(get cs.h csmedia.h) please advise me? if anyone have this files.... send me (wind_pjk@hotmail.com) sorry i write to bad english(-_-;;;;) Tag: Debug Message Format Tag: 86133
- Next
  - 1
    - ILTiming on CEPC HI all, I'm a newbie in Win CE field. I had gone thru PB 5.0 tut and created a run time image for a CEPC successfully. I am able to download it to the target device as well. Now I want to run the "ILTiming" for measuring the interrupt latencies. I went thru the help which talks about the OAL layer modifications to be done. I could not get these details. Please giude me for the same. I'll be very thankfull to you, for your time. P.S. - Its very important for me. Tag: Debug Message Format Tag: 86117
  - 2
    - Bluetooth data transfer Hi I wnat to achieve file data transfer between my PDA and my bluetooth sdio card . My PDA works in a cepc x86 environment on wince5.0 OS platform. What all components should i add to my OS image from the catlog window to achieve file data transfer? Thanks Meribha Tag: Debug Message Format Tag: 86114
  - 3
    - Daylight Savings Time in 2007 not working I am in the process of modifying the registry to test out the daylight savings time changes for 2007 on a CE5.0 device, and have come across a bit of a snag. The functionality doesnâ??t appear to work correctly unless you have the wDay set to either 1 or 5 (i.e. first or last) in the TZI structure. Which means that entering in to Daylight savings time will not be handled correctly. Further digging showed that DST_DetermineChangeDate function in \PRIVATE\SERVERS\TIMESVC2\DST\dst.cpp only supports FIRST_OF_MONTH and LAST_OF_MONTH. So unfortunately, it looks to me like dst.cpp will need to be changed to account for the DaylightDate of the second Sunday in March. Iâ??m hoping this will come in the way of a QFE, but just wanted to let people know that if they are going to try to implement this now for future deployment, it does not work correctly. Unless, of course, I am doing something wrong here. Cam Tag: Debug Message Format Tag: 86109
  - 4
    - Windows Mobile OAL development problem Can anyone tell me if there's a relevent newsgroup or mailing list for discussing OAL issues relevent to Windows Mobile builds as opposed to CE? I've got a BSP that we're developing in parallel on CE5 and WM5(AKU2.5) where the OAL suspend behaves differently on both builds from the same source - I've got a couple of ideas for debugging but am not sure if I can do them within the WM build environment and wanted to run them past someone. Best Wishes, Dave Peverley Tag: Debug Message Format Tag: 86096
  - 5
    - XIP not working Hello, I'm working on XIP on a Mainstone II-like board. It has 32MB of Strataflash NOR FLASH memory and 64MB of RAM. The Windows CE 5.0 image was designed to create a sort of PDA (LCD, touch, bluetooth..) Here you can find 3 different image boot configurations. Config number 3 (XIP) does not work. 1) If I create an image for RAM execution, my CONFIG:BIB contains: NK 80100000 03000000 RAMIMAGE RAM 83100000 00F00000 RAM AUTOSIZE=ON (no ROMOFFSET) The bootloader reports ImageStart = 8010_0000 and Start Address = 8010_1000 The image downloads via LAN to RAM and runs ok. 2) If I create an image for RAM execution and FLASH storage: NK 80100000 03000000 RAMIMAGE RAM 83100000 00F00000 RAM AUTOSIZE=ON ROMOFFSET=3C980000 The bootloader reports ImageStart = BCA8_0000 and Start Address = BCA8_1000 The image downloads via LAN to RAM and FLASHes ok. It runs ok, after a copy from FLASH to RAM and a launch to the RAM Start address. 3) If I create an image for FLASH execution (XIP): NK BCA80000 01F00000 RAMIMAGE RAM 80100000 03F00000 RAM AUTOSIZE = OFF (no ROMOFFSET) The bootloader reports ImageStart = BCA8_0000 and Start Address = BCA8_1000 The image downloads from the LAN to RAM and FLASHes ok. **** It hangs after the launch to BCA8_1000, without any debug message! So, the questions: - Are my CONFIG.BIB settings OK? - Is modifying the CONFIG.BIB enough for having XIP? - Are there Memory controller settings that can alter XIP execution? Thank you in advance, Panino Tag: Debug Message Format Tag: 86092
  - 6
    - Memory map in smdk - 2410 booloader Hi Everybody, I was going through the code of bootloader for smdk - 2410. In the startup.S file, ########################################## 20 add r11, pc, #g_oalAddressTable - (. + 8) ldr r10, =PTs ; (r10) = 1st level page table ########################################## The above piece of code, physical memory from 0x30000000 is being mapped to 0x80000000. Later in the same file, memory is being direct mapped from 0x30000000 to 0x30000000. The code for this is shown below. ############################################# ; Comment: ; The following loop is to direct map RAM VA == PA. i.e. ; VA == 0x30XXXXXX => PA == 0x30XXXXXX for S3C2400 ; Fill in 8 entries to have a direct mapping for DRAM ; ldr r10, =PTs ; restore address of 1st level page table ldr r0, =PHYBASE add r10, r10, #(0x3000 / 4) ; (r10) = ptr to 1st PTE for 0x30000000 ################################################ What is the need for this second memory mapping? In the same startup.s file it was mentioned that the virtual memory can be of 512 MB. Why is this constraint for virtual memory? Any leads in this regard whould be great help. Thanks in Advance, Naveen Atmakuri. Tag: Debug Message Format Tag: 86090
  - 7
    - TCP/IP via Bluetooth in WinCE500 Hello, we are using a Kontron ETX P3T x86 System mit Windows CE 5.0. To get a TCP/IP connection between this system and a Pocket PC running we tried to use an USB Bluetooth Adapter with Ethernet profile but didn't get this thing running. Because the WinCE system is usually used without monitor and keyboard attached the Pocket PC should be able to connect to our WinCE system and establish a TPC/IP connection. We added the Microsoft Bluetooth stack from the Platform builder and got the Linksys USB Bluetooth adapter running so that the Pocket PC can find the device with its given name. The problem is that everytime the Pocket PC (or any other Bluetooth client) tries to connect to the WinCE box the connnection fails with the message that no services are available. Does anyone got a TCP/IP connection running and can give me a hint how to get this profile/service running? Thanks in advance. Gunnar Tag: Debug Message Format Tag: 86089
  - 8
    - Bootloader for Da Vinci hi, I am currently into the development of wince 5.0 bootloader for da vinci processor.But since i am not using the platform builder i used all the including the EBOOT files from wince500.I am using the CCS(Code composer studio) to load my file into the ram In this case i sucessfully initialize the uart and emac controller also i am allocating static ip to the board.Now during the single stepping mode I send the bootme packet ,in my platform builder on host PC i am able to recognise the target device but thats all, after that I am stuck and not able to established the TFTP link and just be inside the loop.when i see the memory location of my buffer where data from net occurs i see that the data is not for my IP and thsi msg i always get. Can anybody help me in the sense that I want kn ow if there is any activity from platform builder side when it recognises the bootme packet and get to know the device on the net,this i need to know because when i see into ethereal i cannot see any data comming from the platform builder PC Please help me into this as I cannot proceed any further. Waiting eagerly for you all to reply. -- Thanks Honey Tag: Debug Message Format Tag: 86088
  - 9
    - USB-WiFi Device not recognized!!! Hi All, I purchased LinkSys WUSB54G from LinkSys to use in our project but WinCE 5.0 didn't recognize it. I added Wireless LAN(802.11) STA- Automatic Configuration, Native Wi-Fi WLAN AP components, and STA from Platform Builder. And since linksys is a division of Cisco i thought winCE would automatically load the driver.(http://msdn.microsoft.com/embedded/usewinemb/ce/drivers/supdrivers/default.aspx#WLAN). What i am doing wrong? What should i do to make WinCE recognize this device? Any help is greatly appreciated. Thanks.. Tag: Debug Message Format Tag: 86082
  - 10
    - ANSI / UNICODE conversion of Greek and Turkish in WinCE ?? Hi, I put all Greek/Turkish string in a text file with ANSI format. I know WinCE uses UNICODE. Now I have a OS with Greek/Turkish codepage. However, Greek/Turkish character can not be correctly shown in the dialog on WinCE 5.0. How can I solve this issue ? Thanks. Yu. Tag: Debug Message Format Tag: 86078
  - 11
    - how to close explore.exe ? hi all. After running my own appliction, I want to close explore.exe to disable others can explore my device. The OS is wince.net 42. Another question is how to disable the sound after explore run over. thanks in advance. Tag: Debug Message Format Tag: 86071
  - 12
    - Bluetooth Profiles Hi, my situation is as below, 1. I am working on phone mobile device with WINCE5.0 2. I have included MS BT stack, headset profile in the build. 3. The Bluetooth chipset PCM output is routed to CODEC. 4. MapAudioToPcmMode = 1 5. I have discovered my mobile device during discovery. My questions are: 1. How do I know if Serial Port Profile, Headset profile is included? Do I need to register services for SDP on the mobile device? I can see the service but not the services. 2. Where can I get a sample Bluetooth manager that can run on the mobile device? 3. Anyway that I can check if my HCI is running well? 4. How to test SPP? 5. How do I connect to bluetooth headset? Thanks in advance... Tag: Debug Message Format Tag: 86070
  - 13
    - PB5.0 does not support RTL8139C+ Help, My playform is IXP422, 128M, PB5.0 It is not stable that use the embedded PB5.0 RTL8139 driver. I think the default RTL8139 PB5.0 drvier , it is not compatible to RTL8139C+. Can I use the default drvier by change fewer registry settings ? Or How to ? Need Help, please! Its urgent.. Tag: Debug Message Format Tag: 86068
  - 14
    - What kind of USB Device Driver I am developing a device driver on WinCE 5.0 based PC for an old device. The device has a 15 pin connectror (RS232 ?). The cable which connects these two has got an adapter or dongle, one end of cable has USB connector and other end has 15 pin d-type connector. Adapter/dongle needs 12V power supply. Can any one help me? 1) What kind of Device Driver I am suppose to develop? 2) Do I need the details about Adapter/Dongle or the end device to develop USB device drive? 3) Where can I find an example of USB device driver? Tag: Debug Message Format Tag: 86065
  - 15
    - NDIS and LAN91c111 I am getting this message. Please, help if you have seen this before. 0x87fa7000: NDIS: Adapter LAN91C111 - NOT using OPTIMIZED RX handler 0x87fa7000: NDIS:: CE_DeleteBusFriendlyNames() failed deleting [HKLM\Comm\BusFriendlyNames] ------------ I am getting low data rate on my ethernet port. The thoroughput is very low. Once a while, I get RX OVERRUN message Tag: Debug Message Format Tag: 86063
  - 16
    - RAS server and network connectivity problems I have a network device I configured to support RAS incoming server. The device is configured for Direct Serial connections. It has a network adapter configured for DHCP. Upon starting the device it connects to the network successfully and starts the RAS server configured for Direct Serial. I then connect my PC to the device using a serial cable. I am able to connect from my PC to the device successfully. However, when I start my device without the network cable attached I find I am unable to connect from my PC to the device sucessfully via serial cable. I am able to see that the RAS server is started and successfully configured. Is this a feature of the RAS server or is there some underlying problem with my BSP? Thanks Tag: Debug Message Format Tag: 86062
  - 17
    - SDK docs wrong in PB5? The documentation on the registry functions seems to be incorrect. Functions like RegOpenKeyEx() are listed as taking a LPCWSTR for the subkey arg, however, I believe they are actually LPCTSTR. A few of the other registry functions are also incorrect. Can anyone shed some light on why the docs specifically use wchars? Thanks, Chris Tag: Debug Message Format Tag: 86059
  - 18
    - Capture Buffer Freed During Capture Hi, I am using somewhat modified WAVEDEV audio driver. The problem is that if a user program tries to record a wave file and then frees the buffer in the middle of the process, the driver chocks. The reason is obvious; this is because the buffer was freed and the driver still thinks it has it available. So I tried to create an event on the user side and pass the info about it to the driver: MyWait = CreateEvent(NULL, FALSE, FALSE, NULL); if (MyWait == NULL) { NKDbgPrintfW(TEXT("Unable to create completion event\r\n")); Return FALSE; } waveInOpen(&hwi, dwDeviceId, &wfx, (DWORD) MyWait, NULL, CALLBACK_EVENT); After this the user program frees the memory and waits for event to happen. On the driver's side I use the try/catch approach to recover from the error (not sure it is a good approach though) and try to signal the user program in this fashion: __try { my_AudioGetBuffer (pwh, (short *) dma_page[v_nNextPage[WAPI_IN]]); } __except (EXCEPTION_EXECUTE_HANDLER) { if( pfnCallback != NULL && gsi[WAPI_IN].dwOpenFlags == CALLBACK_EVENT ) { NKDbgPrintfW (TEXT("Signaling EVENT\r\n")); SetEvent(pfnCallback); } } But it does not work though. The user program does not get this event. Please suggest what I am doing wrong here. Thank you, PK Tag: Debug Message Format Tag: 86050
  - 19
    - two display devices? Hi all, We have two graphic displays in our system (Windows CE 5.0 ARM based platform). Our requirement is to display two different things concurrently. Does GWES support this feature? If so, how to associate a Window created by CreateWindowEx to a particular display device context? Regards Tag: Debug Message Format Tag: 86041
  - 20
    - Windows ce 5 ipsm 3.8.050603 More ce 5 woes, it the turn of the ipsm which throws up the following when I try to build it into the image. BUILD: [01:0000000884:WARNN ] hal.lib(Reg_lowlvl.obj) : warning LNK4217: locally defined symbol __rt_udiv imported in function REG_FlashInitialize BUILD: [01:0000000885:WARNN ] hal.lib(FLASHAPI.obj) : warning LNK4217: locally defined symbol __rt_udiv imported in function FLASH_GetPartitionInfo BUILD: [01:0000000886:ERRORE] hal.lib(Reg_lowlvl.obj) : error LNK2019: unresolved external symbol SC_LoadLibraryW referenced in function REG_FlashShutdown BUILD: [01:0000000887:ERRORE] E:\WINCE500\platform\XSc1bd\target\ARMV4I\retail\kern.exe : fatal error LNK1120: 1 unresolved externals Regards Tag: Debug Message Format Tag: 86039
  - 21
    - Windows Ce 5.0 Sluggish Hi Well Migrated to Windows CE 5.0, and the boot up has slowed down, and the more features I add to it the slower it gets. I added WordPad and inbox and now on boot up I get the egg timer. What on earth is happening, this is so depressing. Anyone else experience this behaviour. Any way I can measure what is happening and compare the result to our wince.net 4.2. Regards Tag: Debug Message Format Tag: 86038
  - 22
    - Memory map in Smdk - 2410 bootloader Hi Everybody, I was going through the code of bootloader for smdk - 2410. ################################################# 20 add r11, pc, #g_oalAddressTable - (. + 8) ldr r10, =PTs ; (r10) = 1st level page table ; Setup 1st level page table (using section descriptor) ; Fill in first level page table entries to create "un-mapped" regions ; from the contents of the MemoryMap array. ; ; (r10) = 1st level page table ; (r11) = ptr to MemoryMap array add r10, r10, #0x2000 ; (r10) = ptr to 1st PTE for "unmapped space" mov r0, #0x0E ; (r0) = PTE for 0: 1MB cachable bufferable orr r0, r0, #0x400 ; set kernel r/w permission 25 mov r1, r11 ; (r1) = ptr to MemoryMap array 30 ldr r2, [r1], #4 ; (r2) = virtual address to map Bank at ldr r3, [r1], #4 ; (r3) = physical address to map from ldr r4, [r1], #4 ; (r4) = num MB to map cmp r4, #0 ; End of table? beq %f40 ldr r5, =0x1FF00000 and r2, r2, r5 ; VA needs 512MB, 1MB aligned. ldr r5, =0xFFF00000 and r3, r3, r5 ; PA needs 4GB, 1MB aligned. add r2, r10, r2, LSR #18 add r0, r0, r3 ; (r0) = PTE for next physical page 35 str r0, [r2], #4 add r0, r0, #0x00100000 ; (r0) = PTE for next physical page sub r4, r4, #1 ; Decrement number of MB left cmp r4, #0 bne %b35 ; Map next MB bic r0, r0, #0xF0000000 ; Clear Section Base Address Field bic r0, r0, #0x0FF00000 ; Clear Section Base Address Field b %b30 ; Get next element 40 tst r0, #8 bic r0, r0, #0x0C ; clear cachable & bufferable bits in PTE add r10, r10, #0x0800 ; (r10) = ptr to 1st PTE for "unmapped uncached space" bne %b25 ; go setup PTEs for uncached space sub r10, r10, #0x3000 ; (r10) = restore address of 1st level page table ; Setup mmu to map (VA == 0) to (PA == 0x30000000). ldr r0, =PTs ; PTE entry for VA = 0 ldr r1, =0x3000040E ; uncache/unbuffer/rw, PA base == 0x30000000 str r1, [r0] ; uncached area. add r0, r0, #0x0800 ; PTE entry for VA = 0x0200.0000 , uncached ldr r1, =0x30000402 ; uncache/unbuffer/rw, base == 0x30000000 str r1, [r0] ; Comment: ; The following loop is to direct map RAM VA == PA. i.e. ; VA == 0x30XXXXXX => PA == 0x30XXXXXX for S3C2400 ; Fill in 8 entries to have a direct mapping for DRAM ; ldr r10, =PTs ; restore address of 1st level page table ldr r0, =PHYBASE add r10, r10, #(0x3000 / 4) ; (r10) = ptr to 1st PTE for 0x30000000 add r0, r0, #0x1E ; 1MB cachable bufferable orr r0, r0, #0x400 ; set kernel r/w permission mov r1, #0 mov r3, #64 45 mov r2, r1 ; (r2) = virtual address to map Bank at cmp r2, #0x20000000:SHR:BANK_SHIFT add r2, r10, r2, LSL #BANK_SHIFT-18 strlo r0, [r2] add r0, r0, #0x00100000 ; (r0) = PTE for next physical page subs r3, r3, #1 add r1, r1, #1 bgt %b45 ldr r10, =PTs ; (r10) = restore address of 1st level page table #################################################### In the above code snippet at first the page table entries are created for mapping of physical memory from 0x30000000 to virtual address 0x80000000. But later 8Mb of memory is being direct mapped from 0x30000000 to 0x30000000 of virtual memory. What is the need of the second memory mapping? Also in the first mapping the bit which needs to be set for backward compatiability is not being set as it is done in the second mapping. Second one it was mentioned that the virtual memory needs to be of 512 MB with 1 MB aligned. Why is this restriction? Any leads in this regard would be of great help. Thanks in Advance, Naveen Atmakuri. Tag: Debug Message Format Tag: 86033
  - 23
    - Wince 5 display driver Hi I migrated our display driver (MediaQ 1132) (hardware is pxa255, display is QVGA) from ce 4.2 to ce 5.0 and although it is working, what I am finding is that directories that contain more icons than can fit on one page it arranges into two columns. Its a mystery, any ideas anyone please Regards Tag: Debug Message Format Tag: 86031
  - 24
    - ARM9 What's ARM9? Can I assume it like ARMV4/ARMV4I family? Can I compile my eVC4 project using its SDK like any other ARMV4I Windows CE device? Max Tag: Debug Message Format Tag: 86026
  - 25
    - What is "Code space full, fixing up <XYZ.dll> to ram space" ? Dear Sir, I use PXA27X and WINCE 5.0 to develop my project. I found some following message when PB 5.0 want ro make image. //=============================================== Pass 1... Code space full, fixing up rtcclient.dll to ram space Code space full, fixing up rtcimsp.dll to ram space ... ... Pass 2... RAM AutoSize: RAM Start=82090000 RAM Size=05f70000 Module osaxst0.dll at offset 02001000 data, 04001000 code Module hd.dll at offset 02001000 data, 04001000 code ... ... Module ddhel.dll at offset 01e14000 data, 02151000 code Module rtcclient.dll at offset 01d31000 Module rtcimsp.dll at offset 01d01000 ... //=============================================== Is it error message ? Actually, my system work well , but I confuse above message. How to remove "Code space full, fixing up <XYZ.dll> to ram space" if possibe ? Could anyone give me more information ? BR, dirwdirw.tw Tag: Debug Message Format Tag: 86023

Hi all,

I view the debug message in Platform Builder as showed below:

240503 PID:620e777a TID:81d0fa1a 0x81f91900: >>> Debug Message

There are timestamps PID:number TID:number.
But what does 0x81f91900 mean?

Thanks in advanced,
Brian

Top

Re: Debug Message Format by Ross

Ross
Wed Jun 14 12:58:00 CDT 2006

That is an application generated-field, so it would depend what application
generated it. My guess is that it is the value of some handle.

-Ross

"Brian" <nospam@nospam.com> wrote in message
news:ezqRNR8jGHA.1260@TK2MSFTNGP05.phx.gbl...
> Hi all,
>
> I view the debug message in Platform Builder as showed below:
>
> 240503 PID:620e777a TID:81d0fa1a 0x81f91900: >>> Debug Message
>
> There are timestamps PID:number TID:number.
> But what does 0x81f91900 mean?
>
> Thanks in advanced,
> Brian
>

Top

Re: Debug Message Format by Brian

Brian
Thu Jun 15 08:16:45 CDT 2006

Hi Ross,

Thank you for your reply.

I set one breakpoint and monitor some handle in the application.
But I could not find any number is the same as been showed in debug window.
Mmm....

Brian

Top