DEBUGCHK error in smartcard

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - How to output Hive format by regcomp.exe? How to output Hive format by regcomp.exe? Hi All: I just want to upgrade RAM-based registry to Hive-based. Therefore, I follow steps as below: 1. set BSP_ENABLE_FSREGHIVE=1 2. set IMGREGHIVE=1 3. set SYSGEN_FSREGHIVE=1 in cesysten.bat 4. set SYSGEN_FSREGRAM= in cesysten.bat 5. add the key in platform.reg ; HIVE BOOT SECTION [HKEY_LOCAL_MACHINE\init\BootVars] "SYSTEMHIVE"="Documents and Settings\\system.hv" "PROFILEDIR"="Documents and Settings" "Start DevMgr"=dword:1 "DefaultUser"="User" ; END HIVE BOOT SECTION Finally, I find regcomp can't transfer reginit.ini to hive format. -----output msg-------- E:\wince\release>regcomp reginit.ini . regcomp: Got LOCALE=0409, using CodePage=1252 regcomp: Overwriting existing value [HKEY_LOCAL_MACHINE\System\StorageManager\ TFS] "Flags" in system registry regcomp: Overwriting existing value [HKEY_LOCAL_MACHINE\System\StorageManager] PNPUnloadDelay" in system registry regcomp: Overwriting existing value [HKEY_LOCAL_MACHINE\System\StorageManager] PNPUnloadDelay" in system registry regcomp: InitRegistry Finished (462 lines). regcomp: Writing registry in fdf format regcomp: Done. ---------------------- The help of regcomp.exe says "determined from flags", what flag is it? How to output Hive format? Output type will be determined from flags in the source file. FDF Output: default.fdf Hive Output: default.hv, boot.hv, user.hv Tag: DEBUGCHK error in smartcard Tag: 53618
  - 2
    - Problem with taskbar ontop setting Hi, i am working with Windows CE .Net 4.2. i want to disable OnTop property of the taskbar. i have following entries in our platform.reg [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\AutoHide] "Default"=dword:0 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\OnTop] "Default"=dword:0 but after cold start, the taskbar is still on top even if registry value is 0. if i do it manually from Taskbar Settings dialog it works properly. is this a bug or is there a different way to do this? i found an old newsgroup link suggesting that it was a bug in 3.0. is it fixed in 4.2? http://groups.google.com/groups?q=ontop+taskbar+windows+ce+.net&hl=en&lr=&ie=UTF-8&selm=%23Si%24IHiZBHA.988%40tkmsftngp03&rnum=1 Thanks, Siddhesh Tag: DEBUGCHK error in smartcard Tag: 53616
  - 3
    - 18BPP Hello, We are trying to port WinCE onto an ARM board. Our LCD is capable of 18BPP whereas WinCE supports only 8,16,24 or 32BPP. How do we change the WinCE display driver to get 18BPP working? Thanks Regards Vidya Tag: DEBUGCHK error in smartcard Tag: 53614
  - 4
    - 18bpp Hello, We are trying to port WinCE onto an ARM board. Our LCD is capable of 18BPP whereas WinCE supports only 8,16,24 or 32BPP. How do we change the WinCE display driver to get 18BPP working? Thanks Regards Vidya Tag: DEBUGCHK error in smartcard Tag: 53613
  - 5
    - 18BPP color depth Hello, We are trying to port WinCE onto an ARM board. Our LCD is capable of 18BPP whereas WinCE supports only 8,16,24 or 32BPP. How do we change the WinCE display driver to get 18BPP working? Thanks Regards Vidya Tag: DEBUGCHK error in smartcard Tag: 53612
  - 6
    - How to insert/delete/modify the help link in the main help? Hi, In PCC, click [start][Help], many help links are shown. How to insert/delete/modify the help link in the main help? Thanks. Yu Tag: DEBUGCHK error in smartcard Tag: 53611
  - 7
    - how can I register a device in my driver?how can i use ActivateDev how can I register a device in my driver?how can i use ActivateDeviceE?Thank for help! Tag: DEBUGCHK error in smartcard Tag: 53610
  - 8
    - How to enable polled KITL? hi, There are some errors in my KITL,so I want to use the polled KITL. But I don't know the detailed method. Need I just pass the KITL_SYSINTR_NOINTR value to the kernel in the Interrupt parameter of KITLTRANSPORT and whether I need call KitlInit (FALSE)? If need I call KitlInit (FALSE), what is the relationship between PASSIVE kitl with polled KITL? Fred Tag: DEBUGCHK error in smartcard Tag: 53608
  - 9
    - =?ISO-8859-1?Q?Can=B4t_see_Hard_Disk_in_the_image?= I did an image for a 486 DX2 66 with 1 Gb HD and booted it with loadcepc, from the HD. After the boot, I got the image runing well, but I couldn´t mount the HD. The manager apears in the control panel but all blank. I ´ve put the FAT and the ATAPI components in the image. Has anybody faced it before? Any help will be apreciated. Thanks Tag: DEBUGCHK error in smartcard Tag: 53601
  - 10
    - Debug image throws First chance exception I created a tiny kernel OS image for the CE 4.20 emulator. This all works fine in release and debug builds. Then I added TCP/IP 4 from the catalog. When I create a release build everything works fine. But when I create a debug build, I get a "First chance exception in NK.EXE. (0xC000001C: Invalid System Service)" dialog. I made sure "Enable Full Kernel Mode", "Enable Images Larger than 32MB" and "Enable Kernel Debugger" are all selected. "Enable CE Target Control Support", "Enable EBoot Space in Memory" and "Enable KITL" are also selected. What am I doing wrong? Kernel debugger is waiting to connect with target. 0 PID:0 TID:0 RTC - Status Reg B - 0x02 0 PID:0 TID:0 X86Init done, OEMAddressTable = 8026a648. Welcome to the Windows CE Shell. Type ? for help. Kernel debugger failed to connect with target (KDBG open stream failed). Debugger could not initialize connection. Kernel debugger is waiting to connect with target. 0 PID:0 TID:0 CEPC Firmware Init 0 PID:0 TID:0 RTC - Status Reg B - 0x02 0 PID:0 TID:0 PCIBIOS:: BIOS Address static map to addr=a00e0000 0 PID:0 TID:0 GetPicRoutingIrqTable: Start 0 PID:0 TID:0 search_pci_bios start 0 PID:0 TID:0 search_pci_bios end fails 0 PID:0 TID:0 GetPicRoutingIrqTable: FAILS!!! 0 PID:0 TID:0 Firmware Init Done. 0 PID:0 TID:0 Looking for rom chain 0 PID:0 TID:0 Rom chain NOT found 0 PID:0 TID:0 Booting Windows CE version 4.20 for (x86) 0 PID:0 TID:0 &pTOC = 80245a78, pTOC = 804a071c, pTOC->ulRamFree = 80511000, MemForPT = 00004000 0 PID:0 TID:0 Old or invalid version stamp in kernel structures - starting clean! 0 PID:0 TID:0 Configuring: Primary pages: 15078, Secondary pages: 0, Filesystem pages = 7539 0 PID:0 TID:0 Booting kernel with clean memory configuration: 0 PID:0 TID:0 Memory Sections: 0 PID:0 TID:0 [0] : start: 80516000, extension: 00004000, length: 03ae6000 0 PID:0 TID:0 X86Init done, OEMAddressTable = 802ab7b8. 0 PID:0 TID:0 Windows CE KernelInit 4294767306 PID:3fff002 TID:3fff1da Updated eptr->e32_vsize to = 00080000 4294767316 PID:3fff002 TID:3fff1da Scheduling the first thread. 4294767316 PID:3fff002 TID:3fff1da 0x83fff030: KernelInit2: pCurThread=83fff030 hCurThread=03fff1da hCurProc=03fff002, KernelInit = 8028be3e 4294767336 PID:3fff002 TID:3fff1da 0x83fff030: Updated eptr->e32_vsize to = 00010000 4294767356 PID:3fff002 TID:3fff1da 0x83fff030: >>> Loading module NK.EXE at address 0x80240000-0x802C0000 (RW data at 0x804D3000-0x8050648B) Kernel debugger connected (KDBG stream opened). Kernel Version 1169 Checked loaded at 0x80240000, data relocated at 0x804d3000 Debugger connection established (Target CPU is X86). Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\NK.EXE' Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\KD.DLL' Finished re-loading kernel modules. Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\COREDLL.DLL' Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\FILESYS.EXE' Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\FSDMGR.DLL' Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\RELFSD.DLL' 4294767406 PID:3fff002 TID:3fff1da 0x83fff030: first = 01fb0000, last = 02000000, SharedDllBase = 03d10000 4294767436 PID:3fff002 TID:3fff1da 0x83fff030: >>> Loading module coredll.dll at address 0x03FB0000-0x03FF5000 (RW data at 0x01FFF000-0x01FFF7B0) 4294767466 PID:3fff002 TID:3fff1da 0x83fff030: Did not find emulation code for x86... using floating point hardware. 4294767556 PID:a3feff4a TID:a3feff1a 0x83fefd70: >>> Loading module filesys.exe at address 0x04010000-0x0404E000 4294767606 PID:a3feff4a TID:a3feff1a 0x83fefd70: FileSystem Starting - starting with clean file system 4294767706 PID:a3feff4a TID:a3feff1a 0x83fefd70: >>> Loading module fsdmgr.dll at address 0x03F60000-0x03F77000 (RW data at 0x01FF7000-0x01FF7760) 4294767756 PID:a3feff4a TID:a3feff1a 0x83fefd70: >>> Loading module relfsd.dll at address 0x03F90000-0x03F99000 (RW data at 0x01FFB000-0x01FFBABC) 4294767806 PID:a3feff4a TID:a3feff1a 0x83fefd70: FSREG: Logging in default user. 4294767806 PID:a3feff4a TID:a3feff1a 0x83fefd70: SetCurrentUser: Logging out (nobody), logging in default 4294767806 PID:a3feff4a TID:a3feff1a 0x83fefd70: FS: Using default path "\profiles\" 4294767816 PID:a3feff4a TID:a3feff1a 0x83fefd70: SetCurrentUser: User hives not supported -- using same registry for all users 4294767816 PID:a3feff4a TID:a3feff1a 0x83fefd70: FS: Using default path "Windows\" 4294767866 PID:a3feff4a TID:a3feff1a 0x83fefd70: FS: Using default path "Windows\" 4294767946 PID:a3feff4a TID:43fd1fd2 0x83ff2db8: Mounted ReleaseFSD volume '\Release' 4294767996 PID:a3feff4a TID:a3feff1a 0x83fefd70: Filesystem initialized! 4294767996 PID:3fff002 TID:e3ff2f92 0x83fef800: InitializeJit 4294767996 PID:3fff002 TID:e3ff2f92 0x83fef800: InitMUI: DISABLED (-2145012568) 4294768246 PID:e3fefbb2 TID:e3fcbc32 0x83ff2db8: >>> Loading module toolhelp.dll at address 0x03F80000-0x03F84000 (RW data at 0x01FF9000-0x01FF9054) Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\TOOLHELP.DLL' 4294768256 PID:e3fefbb2 TID:e3fcbc32 0x83ff2db8: >>> Loading module shell.exe at address 0x06010000-0x06023000 Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\SHELL.EXE' 4294768366 PID:83fd1fd2 TID:83fcb93a 0x83fcba88: >>> Loading module device.exe at address 0x08010000-0x0801C000 Loaded symbols for 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\DEVICE.EXE' 4294768556 PID:83fcba5a TID:83fefd32 0x83fef800: >>> Loading module ceemulsrv.exe at address 0x0A010000-0x0A014000 Loaded 'C:\WINCE420\PUBLIC\GCUSTOM\RELDIR\EMULATOR_X86DEBUG\CEEMULSRV.EXE', no matching symbolic information found. 4294768576 PID:a3feff4a TID:83fefd32 0x83fef800: ObjectCall: Failed(1): 16 4294768576 PID:a3feff4a TID:83fefd32 0x83fef800: Exception ffffffff Thread=83fef800 Proc=a3feff4a 'filesys.exe' 4294768576 PID:a3feff4a TID:83fefd32 0x83fef800: AKY=00000013 PC=8029c33a ESP=0a11d5c0 EA=00000000 Debugger disconnected successfully. Tag: DEBUGCHK error in smartcard Tag: 53597
  - 11
    - Problem building after QFE 040423_KB840880 When I try to build my x86 platform after installing this qfe, I get unresolved symbol errors when linking ndislib.lib. I replaced the ndislib.lib file installed by this qfe with the orginal file, and it builds w/o errors. Thanks for any suggestions. From build.log: ... Microsoft (R) Library Manager Version 6.24.3064 Copyright (C) Microsoft Corporation. All rights reserved. -subsystem:windowsce,4.20 Creating library D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\sdk\lib\x86\retail\ndis.lib and object D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\sdk\lib\x86\retail\ndis.exp set LIB=D:\WINCE420\sdk\CE\lib link /LARGEADDRESSAWARE -out:D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\oak\target\x86\retail\ndis.dll -dll -machine:x86 @C:\DOCUME~1\JOHNC~1.WOR\LOCALS~1\Temp\nmAD2.tmp Microsoft (R) Incremental Linker Version 6.24.3064 Copyright (C) Microsoft Corporation. All rights reserved. -nodefaultlib -entry:DllEntry -debug -debugtype:cv -incremental:no /opt:ref -pdb:D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\oak\target\x86\retail\ndis.pdb -map:D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\oak\target\x86\retail\ndis.map -savebaserelocations:D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\oak\target\x86\retail\ndis.rel -MERGE:.rdata=.text -ignore:4001,4070,4078,4086,4089,4096,4099,4108 /STACK:65536,4096 -subsystem:windowsce,4.20 /base:0x10000000 D:\WINCE420\public\common\oak\lib\x86\retail\ndislib.lib D:\WINCE420\public\common\sdk\lib\x86\retail\ntcompat.lib D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\oak\lib\x86\retail\ceddk.lib D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\sdk\lib\x86\retail\coredll.lib D:\WINCE420\public\common\sdk\lib\x86\retail\corelibc.lib D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\sdk\lib\x86\retail\ndis.exp ndislib.lib(nfilter.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(ndispwr.obj) : error LNK2019: unresolved external symbol _CTEFreeMem referenced in function _ndisSetDevicePowerDownComplete ndislib.lib(ceinternal.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(minint.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(mac.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(tfilter.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(cepcmcia.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(sendm.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(config.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(timerm.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(requestm.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(ndispnp.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(miniport.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(configm.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(initpnp.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(common.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(lookasid.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(protocol.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(init.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(ndis.obj) : error LNK2019: unresolved external symbol _CTEFreeMem referenced in function _ndisUnbindProtocol ndislib.lib(efilter.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(minisub.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(cestreamdrv.obj) : error LNK2001: unresolved external symbol _CTEFreeMem ndislib.lib(ceinternal.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(tfilter.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(cepcmcia.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(nfilter.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(ndispwr.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(config.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(timerm.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(requestm.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(mac.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(miniport.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(configm.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(initpnp.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(sendm.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(common.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(lookasid.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(protocol.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(init.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(ndis.obj) : error LNK2019: unresolved external symbol _CTEAllocMem referenced in function _ndisReferenceMiniportByName ndislib.lib(efilter.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(minisub.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(cestreamdrv.obj) : error LNK2001: unresolved external symbol _CTEAllocMem ndislib.lib(timerm.obj) : error LNK2019: unresolved external symbol _SysintrNetworkInterruptMask referenced in function _ndisSyncWithInterrupt ndislib.lib(timerm.obj) : error LNK2019: unresolved external symbol _SysintrNetworkInterruptDone referenced in function _ndisMIsr D:\WINCE420\PUBLIC\56SAM_~1\WINCE420\56SAM\cesysgen\oak\target\x86\retail\ndis.dll : fatal error LNK1120: 4 unresolved externals NMAKE : fatal error U1077: 'link' : return code '0x460' Stop. NMAKE : fatal error U1077: 'D:\WINCE420\sdk\bin\i386\nmake.exe' : return code '0x2' Stop. Tag: DEBUGCHK error in smartcard Tag: 53591
  - 12
    - Regional settings with Korean fonts Hi, Can anyone help me with this problem? I want to add Korean in the regional settings. So I went to PlatformBuilder->Project->settings->locale, add Korean, then add font GL_CE and Subset 1_30 under catalog International to my project. After I build the OS and start the device, in the Regional Setting, I still see square under Korean. I did the same thing for Chinese (both simplified and traditional). I can see correct Chinese charactors. Any information is appreciated. Thanks a lot. Tag: DEBUGCHK error in smartcard Tag: 53590
  - 13
    - Full DUplex hi! I am writing a driver for a thernet controller which supports 100/10 Mbps Ful duplex operation.. at one place in the documentation for the MiniportqueryInformation I read that WinCE doesn't support full duplex.. At many other places there are statments like "if the miniport driver is full duplex".... Now I am not able to understand clewarly that whether or not I can take th full duplex adavantage of my NIC through a miniport driver writtten for WinCE. Can anyone please clarify me on this. regards -Nitin Tag: DEBUGCHK error in smartcard Tag: 53589
  - 14
    - Understand Debugger Output Info Hi all, I am working with a Headless device, just with the tiny kernel and TCP/IP communications. I cannot debug the image with platform builder, but I can see the debug messages through the serial line. I often get debug messages as follows: "ObjectCall : Failed(2) : h=xxxxxx\r\n Invalid Handle : Set = 1 Method = 6" "ObjectCall : Failed(2) : h=xxxxxx\r\n Invalid Handle : Set = 7 Method = 3" I know that these messages are generated by the kernel, presumably due to the lack of some API function in the image. The source code that generates this output is located at ... "%WINCEROOT%\PRIVATE\WINCEOS\COREOS\NK\KERNEL\objdisp.c" ..but "using" the source code gives me no info. My question is : How can I know the API functions that are generating that output, taking into account that my only information is the values of "Set" and "Method" variables? I've been looking for an API table in the sources but I have had no success. Thanks in advance, Roberto Tag: DEBUGCHK error in smartcard Tag: 53587
  - 15
    - Compiling / Linking the BIOS BOOT LOADER sample Hi, I'm using Windows CE 4.2 and a Geode-based system. I would like to make some changes in the BIOS boot loader. I found the sources in PUBLIC\COMMON\OAK\CSP\i486\BIOSLOADER\LOADER. But I don't know how can I compile/link these sources. I took a look to the file makefile.inc and it seems to me that I should use PB. But how ? Regards. Gabriel. Tag: DEBUGCHK error in smartcard Tag: 53584
  - 16
    - help,help!! am using the smdk2410 , after build in the debug, it print out as below and stopped, but in the release ,it can run well, include the targt controll and gwes. it seems it 's filesys's problem, but i had no idea and it had take me three days. so anyone can help me will welcome, and thanks in advance. 4294768996 PID:6fede23e TID:6fee3fd2 0x8fede000: FMD::FMD_Init 4294769006 PID:6fede23e TID:6fee3fd2 0x8fede000: FLASHDRV.DLL:BuildupMappingInfo() - Enter. 4294769366 PID:6fede23e TID:6fee3fd2 0x8fede000: FMD::FMD_OEMIoControl = 0x71c24 4294769386 PID:6fede23e TID:6fee3fd2 0x8fede000: >>> Loading module mspart.dll at address 0x03CF0000-0x03CFC000 (RW data at 0x01FDA000-0x01FDA4A4) Loaded symbols for 'D:\WINCE420\PUBLIC\PG622\RELDIR\SAMSUNG_SMDK2410_ARMV4DEBUG\MSPART.DLL' 4294769406 PID:6fede23e TID:6fee3fd2 0x8fede000: Loading partition driver mspart.dll hModule=8FEC0A14 4294769416 PID:6fede23e TID:6fee3fd2 0x8fede000: Driver mspart.dll loaded 4294769426 PID:6fede23e TID:6fee3fd2 0x8fede000: <<< Unloading module mspart.dll at address 0x03CF0000-0x03CFC000 (RW data at 0x01FDA000-0x01FDA4A4) Unloaded symbols for 'D:\WINCE420\PUBLIC\PG622\RELDIR\SAMSUNG_SMDK2410_ARMV4DEBUG\MSPART.DLL' 4294769446 PID:6fede23e TID:6fee3fd2 0x8fede000: Opened the store hStore=4FEC0926 4294769456 PID:6fede23e TID:6fee3fd2 0x8fede000: NumSec=130688 BytesPerSec=512 FreeSec=0 BiggestCreatable=0 4294769466 PID:6fede23e TID:6fee3fd2 0x8fede000: Partition PART00 NumSectors=130688 4294769486 PID:6fede23e TID:6fee3fd2 0x8fede000: >>> Loading module fatfsd.dll at address 0x03EB0000-0x03ED8000 (RW data at 0x01FF9000-0x01FF9674) Loaded symbols for 'D:\WINCE420\PUBLIC\PG622\RELDIR\SAMSUNG_SMDK2410_ARMV4DEBUG\FATFSD.DLL' 4294769506 PID:6fede23e TID:6fee3fd2 0x8fede000: FSD_MountDisk: mounting volumes for hDsk=000A3E80 4294769516 PID:6fede23e TID:6fee3fd2 0x8fede000: FATFS!MountDisk: BPB_HiddenSectors(-1) != 0 4294769526 PID:6fede23e TID:6fee3fd2 0x8fede000: FATFS!OpenVolume: access time updates disabled 4294769536 PID:6fede23e TID:6fee3fd2 0x8fede000: FATFS!OpenVolume: event logging enabled 4294769546 PID:6fede23e TID:6fee3fd2 0x8fede000: FATFS!OpenVolume: automatic scanning disabled 4294769556 PID:6fede23e TID:6fee3fd2 0x8fede000: FATFS!OpenVolume: write verify disabled 4294769566 PID:6fede23e TID:6fee3fd2 0x8fede000: FATFS!OpenVolume: extra FAT on format disabled 4294769576 PID:6fede23e TID:6fee3fd2 0x8fede000: FATFS!OpenVolume: force write through enabled Tag: DEBUGCHK error in smartcard Tag: 53582
  - 17
    - tcpipc.dll - cemgrc.exe - cetlstub.dll ; Where to download ? I need these files for a x86 CEPC to be able to remote debug, view processes etc... I can't find these neither in the platform builder folders nor in the evc++4.0 folders. It seems that I used to see these files when I used to program with evc++3.0 but I'm not sure. Would I have to install evc++3.0 to get these ? thanks Tag: DEBUGCHK error in smartcard Tag: 53581
  - 18
    - Mapping register Hi I'm trying to map some registers in the oeminit table but it doesn't seem to work. In the OEMAdressTable, I put dd 80000000h, 0, 01E00000h // my 31Mo of RAM dd 82000000h, 084C6000h, 0000000Ch // the registers I want to have a look at In my driver to read the registers, I wrote __asm { xor eax, eax mov esi,082000000h mov eax, [esi] mov value, eax }; But when I execute the code, it yields an exception when coming to the line mov eax, [esi]... Can somebody help me???? Cause I not so familiar with asm and I can't figure out whether it's an asm problem or a mapping problem. Thanks Tom Tag: DEBUGCHK error in smartcard Tag: 53578
  - 19
    - difficulties with a PCM-5823 board & network Hello, I have a problem concerning my Win CE 4.2 image. It runs on a PCM-5823 board with Realtek network chips. However, I cannot connect to our network. It seems that the networkchips are not recognized (if I execute "ipconfig" in the command line interface it says "No IPv4 adapter found.". I made sure that the chips are activated and that the network functionality is included in the image. I tried to find a driver for the network chips (RTL 8139c) but I couldn't find one. Did anyone of you also face such difficulties? If yes... how did you solve it? Thanks for your help. M. Traub Tag: DEBUGCHK error in smartcard Tag: 53577
  - 20
    - anyone can help, image cannot start. i usr the smdk2410 bsp in pb42, and config as handheld device. after use eboot's to format the nand as binfs type, the image print out these and stopped. it seems fail in the filesys.exe run. who can tell me what these. the device i use has a 32M nand. Loaded symbols for 'D:\WINCE420\PUBLIC\PG619\RELDIR\SAMSUNG_SMDK2410_ARMV4DEBUG\COREDLL.DLL' 4294767516 PID:6fede23e TID:6fee3fd2 0x8fede000: >>> Loading module filesys.exe at address 0x04010000-0x0408A000 Loaded symbols for 'D:\WINCE420\PUBLIC\PG619\RELDIR\SAMSUNG_SMDK2410_ARMV4DEBUG\FILESYS.EXE' 4294767536 PID:6fede23e TID:6fee3fd2 0x8fede000: FileSystem Starting - starting with clean file system 4294767546 PID:6fede23e TID:6fee3fd2 0x8fede000: OEMSetRealTime: Year: 2003, 4294767556 PID:6fede23e TID:6fee3fd2 0x8fede000: OEMSetRealTime(register): 0x8fede000: >>> Loading module fsdmgr.dll at address 0x03D00000-0x03D1C000 (RW data at 0x01FDC000-0x01FDC754) Loaded symbols for 'D:\WINCE420\PUBLIC\PG619\RELDIR\SAMSUNG_SMDK2410_ARMV4DEBUG\FSDMGR.DLL' 4294768916 PID:6fede23e TID:6fee3fd2 0x8fede000: >>> Loading module flashdrv.dll at address 0x027F0000-0x02804000 (RW data at 0x01E4F000-0x01E4FAF4) Loaded symbols for 'D:\WINCE420\PUBLIC\PG619\RELDIR\SAMSUNG_SMDK2410_ARMV4DEBUG\FLASHDRV.DLL' 4294768936 PID:6fede23e TID:6fee3fd2 0x8fede000: FMD::FMD_Init 4294768946 PID:6fede23e TID:6fee3fd2 0x8fede000: FLASHDRV.DLL:BuildupMappingInfo() - Enter. 4294768956 PID:6fede23e TID:6fee3fd2 0x8fede000: FLASHDRV.DLL:L2P_GetPhysicalSectorAddr() - Secondary table doesn't exist for logical sector 0x0!!! 4294768966 PID:6fede23e TID:6fee3fd2 0x8fede000: FLASHDRV.DLL:L2P_GetPhysicalSectorAddr() - Secondary table doesn't exist for logical sector 0x400!!! 4294768986 PID:6fede23e TID:6fee3fd2 0x8fede000: FLASHDRV.DLL:L2P_GetPhysicalSectorAddr() - Secondary table doesn't exist for logical sector 0x800!!! 4294768996 PID:6fede23e TID:6fee3fd2 0x8fede000: FLASHDRV.DLL:L2P_GetPhysicalSectorAddr() - Secondary table doesn't exist for logical sector 0xc00!!! 4294769016 PID:6fede23e TID:6fee3fd2 0x8fede000: FLASHDRV.DLL:L2P_GetPhysicalSectorAddr() - Secondary table doesn't exist for logical sector 0x1000!!! 4294769026 PID:6fede23e TID:6fee3fd2 0x8fede000: FLASHDRV.DLL:L2P_GetPhysicalSectorAddr() - Secondary table doesn't exist for logical sector 0x1400!!! Tag: DEBUGCHK error in smartcard Tag: 53575
  - 21
    - Change or Remove default applet in PPC Hi, There are many default control panel applets in PPC. How can I remove it if I don't need some one (Contrast)? How can I replace it if I don't like some one (Backlight)? Thanks. Yu. Tag: DEBUGCHK error in smartcard Tag: 53574
  - 22
    - About bluetooth This is a multi-part message in MIME format. ------=_NextPart_000_0016_01C45841.B1A6E580 Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: quoted-printable Hi,all: My device has a UART-Bluetooth module,in PB4.2,I added "Bluetooth = with Universal Loadable Drivers" to my workspace,and in file = project.reg,I added these messages: [HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Debug] "mask"=3Ddword:ffffffff "console"=3Ddword:0 [HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Transports\Builtin\1] "driver"=3D"bthuart.dll" "flags"=3Ddword:4 "name"=3D"COM5:" "baud"=3Ddword:1c200 "resetdelay"=3Ddword:1388 Then the Bluetooht module can run smoothly,it can communicate with = other bluetooth device.but all that is under the debug mode.when I built = a retail image with the same settings. the bluetooth module can't work = at all.I got the error messages:"Bluetooth error,bluetooth hardware = error 10050,controller isn't exist!",who can tell me that is why?why it = can run under debug mode but not retail mode? Thanks a lot. Best Regards! ------=_NextPart_000_0016_01C45841.B1A6E580 Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; charset=3Dgb2312"> <META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT size=3D2>Hi,all:</FONT></DIV> <DIV><FONT size=3D2>    My device has a UART-Bluetooth=20 module,in PB4.2,I added "Bluetooth with Universal Loadable Drivers" = to my=20 workspace,and in file project.reg,I added these messages:</FONT></DIV> <DIV><FONT=20 size=3D2>[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Debug]<BR>&nbsp= ;  =20 "mask"=3Ddword:ffffffff<BR>    = "console"=3Ddword:0</FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT=20 size=3D2>[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Transports\Buil= tin\1]<BR>   =20 "driver"=3D"bthuart.dll"<BR>   =20 "flags"=3Ddword:4<BR>    = "name"=3D"COM5:"<BR>   =20 "baud"=3Ddword:1c200<BR>   =20 "resetdelay"=3Ddword:1388<BR>    Then the Bluetooht = module can run=20 smoothly,it can communicate with other bluetooth device.but = all that is=20 under the debug mode.when I built a retail image with the same settings. = the=20 bluetooth module can't work at all.I got the error messages:"Bluetooth=20 error,bluetooth hardware error 10050,controller isn't exist!",who can = tell me=20 that is why?why it can run under debug mode but not retail = mode?</FONT></DIV> <DIV><FONT size=3D2>   Thanks a lot.</FONT></DIV> <DIV><FONT size=3D2>   Best = Regards!</FONT></DIV></BODY></HTML> ------=_NextPart_000_0016_01C45841.B1A6E580-- Tag: DEBUGCHK error in smartcard Tag: 53573
  - 23
    - help me hi all, i would like to know how can i access files @ host from appalications running @ target? Tag: DEBUGCHK error in smartcard Tag: 53571
  - 24
    - NDIS WAN IM for WinCE Hello all, This is my first time on this board as I believe I have come across a stump regarding this project I am working on. My situation is this. I have succesfully ported over passthru for WinCE(in this case for Pocket PC). And my IM driver is succesfully able to 'passthru' packets on the upper edge(TCPIP protocol) and the loweredge drivers(ethernet card). My problem is I want to bind my driver between PPP and AsyncMac on the PPC. I ended up creating a new IM driver to handle the WAN interface of NDIS. I have succesfully sandwich myself between PPP and AsyncMac but when PPP sends a packet and my WANSendHandler is called I am not sure what to do next? Should I go ahead and repackage the NDIS_WAN_PACKET into a NDIS_PACKET and call NdisSend to AsyncMac? If so, how is this properly done? I do not consider myself a expert on NDIS as I am still new to this but any help would be greatly appreciated. Thanks Tag: DEBUGCHK error in smartcard Tag: 53558
  - 25
    - CEDB: Design advise about OID handling when using ReplOpenSync Hello, For a given customer with tough requirements and given hardware design I would like some help in choosing the best solution. I have a CEDB (requirement) which I use almost as a relational database, using "keys" (OIDs to point out other OIDS in the database). My basic question is how I can keep a backup of that database and still persist the OIDs. My scenario is that I have a CEDB volume on an external storage card (FAT, requirement). A user can remove the card at any time (requirement), so I cannot use the DB directly on the storage card (user would remove the card and applications would break..). Instead I copy the volume file during boot to a RAM disk, and open it from there. Several applications can open the DB and I need to persist any changes made to the storage card (if the user has removed the storage card changes may be lost, but at least nothing crashes). Since several applications might have opened the DB file from the RAM disk I cannot simply copy the DB volume file from RAM disk to SD card as it changes, since I cannot take a consistent snapshot of the file (right? An application could in theory change it while I'm writing it to disk). Therefore I'd like to keep a second copy of the DB in RAM that I keep updated with counter-based replication (ReplOpenSync). Any changes to the first DB would be replicated to the second copy. The second copy would only be opened by "me" in a driver, thus I could close that DB file and make a controlled consistent working backup to the storage card. So basically I'm looking for a CEDB function like "CeMakeBackupToFile(LPCWSTR filename);" :-) Of course any feedback or better suggestions are more than welcome. Thanks in advance, Mattias Tag: DEBUGCHK error in smartcard Tag: 53555
- Next
  - 1
    - CEDB: File size not decreased when deleteing records? Hello, I wonder about the CEDB behaviour when deleting records from a DB file (volume). If I add lots of records to a CEDB, then delete those records and close the file, it seems like the file size isn't changed after I've deleted all items. Shouldn't the file size be decreased after the records have been deleted again? What is the expected behaviour? Thanks in advance //Mattias Tag: DEBUGCHK error in smartcard Tag: 53553
  - 2
    - LOADIND DLLS hI, we launch two processes (.EXE links with a common DLL). The Dll is loaded twice. How avoid this and load only one instance of the the DLL? Thanks for your help. Steve Tag: DEBUGCHK error in smartcard Tag: 53552
  - 3
    - Formatting CF device (CE 4.2) Hi All, I am using Platform Builder 4.2. I have a problem trying to programmatically format a compact flash card from my CE device. When I try to get a handle to the device with CreateFile and a device name of "\\Compact Flash2\\Vol:" I get a last error code of 123 (File name, directory name or volume label syntax is incorrect), if I try any other name I get error code 2 or 3 (path/file not found). As far as I can see I'm following what's in MSDN and the CE/EVC help files; any idea what I'm doing wrong? Many Thanks, Martin. Code snippet (irrelevant stuff removed): DeviceName = _T("\\Compact Flash2\\Vol:"); DeviceHandle = CreateFile( DeviceName, GENERIC_READ|GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, NULL ); Error = GetLastError(); Tag: DEBUGCHK error in smartcard Tag: 53543
  - 4
    - error message? Hi all I worked to pxa263 target and wince.net4.2. My problem is happened to connect to PC with activesync. Error message is following "Can not conect to PC . No Program Memory available. Stop some programs,and try again..." My image size is small.(almost 15 Mbytes) Please reply to some hint. Thanks in advance. Tag: DEBUGCHK error in smartcard Tag: 53542
  - 5
    - About socket() Hello, I am trying to perform my socket software. I load and do step execution of the program. A program is as follows. : : i = WSAStartup(wVersionRequested, &wsaData); s = socket( AF_INET, SOCK_DGRAM, 0 ); : : It stops, when socket function is performed exactly. A stop place is as follows. [.../NK/KERNEL/objdisp.c] RETADDR ObjectCall (POBJCALLSTRUCT pobs) { : : if ((inx = iMethod>>HANDLE_SHIFT & HANDLE_MASK) >= NUM_SYS_HANDLES || (pci = SystemAPISets[inx]) == 0) { DEBUGMSG(1, (TEXT("ObjectCall: Failed(1): %lx\r\n"), inx)); RaiseException(STATUS_INVALID_SYSTEM_SERVICE, EXCEPTION_NONCONTINUABLE, 1, &iMethod); => DEBUGCHK(0); /* shouldn't get here */ } : : The cause is because inx is set to 0x13 and SystemAPISets[inx] is 0. (iMethod is 0x131C.) The loaded module is as follows. Windows CE>gi mod MOD: Name pModule :dwInUSE :dwVMBase:CurZone M00: ceddk.dll 83c62348 00000008 03df0000 00000000 M01: coredll.dll 83cb42a0 0000000f 03f60000 00000000 M02: fsdmgr.dll 83c9f718 00000002 03e70000 00000000 M03: kd.dll 83cb74d4 00000001 80166000 00000000 M04: ndis.dll 83c550d8 00000008 03b90000 0000c001 M05: pm.dll 83c6c544 00000008 03f40000 00000007 M06: regenum.dll 83c62e70 00000008 03f50000 00000000 M07: relfsd.dll 83c88e6c 00000002 03ee0000 0000000c M08: toolhelp.dll 83c7c4a8 00000004 03ed0000 00000000 M09: wavedev.dll 83c4bec8 00000008 031a0000 0000c000 Windows CE> Please let me know the factor which such a phenomenon generates. Thanks in advance. Yamada Tag: DEBUGCHK error in smartcard Tag: 53538
  - 6
    - How to copy the new OS image into ROM to repalce the old OS image? Dear, I have created a new OS image. How can I replace the touch panel's existing OS image with my new OS image? Thanks. Lilian Tag: DEBUGCHK error in smartcard Tag: 53537
  - 7
    - PB4.2 Builder fault - IE TVLens + HTML Application support All, I have just spent a considerable amount of time with a quite simple problem. Now I know about it. Within my workspace image I require IE HTML Application support (SYSGEN_MSHTML_HTMLAPP) which allows the execution .HTA files under Windows CE. I also require the IE TV-Style Navigation support (TVLENS_ALL) but if I add this or one of the components which makeup this the image looses it understanding of the .HTA file. As I said I've spent a considerable amount of time tracking this down and have been unable to find a build solution. The issue seems to be within the SYSGEN IE phase of the build and the CECONFIG.H gets built with the MSHTML_HTMLAPP define. So you get the MSHTA.EXE but it does not know how to parse or process the file. The other interesting thing that I did try is to force the relevant registry entries into the platform reg from ie.reg but the image does not give an unknown file error but still does not work. Any help or suggestion of a fix would be most appreciated. Nigel Goodyear Intrinsyc Europe Ltd Tag: DEBUGCHK error in smartcard Tag: 53536
  - 8
    - How to add touchp.dll into touch screen? Dear, Project menu>Insert>Existing ProjectI have downloaded touch panel driver-Windows CE.NET(RS232) from http://www.egalax.com.tw/Current/WinCE.NET_X86_RS232_1.0.1.2102%20A.zip. The downloaded zip file consists 3 files: Calibration.exe; TOUCH.DLL; RegistrySettingFor232.txt I have tried the steps below: 1) I goto Project menu>Insert>Existing Project> I add the TOUCHP.dll. TOUCHP.DLL appears in user features folder. 2) I open project.reg and add in the following setting: [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH] "DriverName"="Touchp.dll" "CalibrationData"="102,102 1945,102 1945,1945 102,1945" "COMM"="COM1:" "BCLEFT"=dword:64 "BCRIGHT"=dword:64 "BCTOP"=dword:64 "BCBOTTOM"=dword:64 3) I Built Platform, 1 warning shows below: Warning: Using old fixup style in module TOUCHP.DLL TESTPLATFORM03 - 0 error(s), 1 warning(s) Eventhough I succesfully download the image into touch screen, but the touch function still not work in the touch screen. Why? Am I doing anything wrong? Thanks! Best Regards, Lilian Tag: DEBUGCHK error in smartcard Tag: 53534
  - 9
    - usbd.lib not found I installed eMbedded Visual Tools 3.0 - 2002 Edition along with the PocketPC2002 SDK. And I want to compile a usb driver project that uses usbd.lib. But this library cannot be found on my PC. What can I do? Best regrads, Julius. Tag: DEBUGCHK error in smartcard Tag: 53533
  - 10
    - Adding a Dialog Box into a LIB File Dear all, I am trying to customize the btenum.cxx from Platform Builder 4.2 so it will display a dialog box when performing an action. Previously this btenum.lib does not contains any dialog box or resource in it. So I created my own resource.h and btenum.rc and add into the btenum folder. For testing purpose, actually it is just a simple about dialog box with a label and an OK button. Then I modify the sources file as follow: ////////////////////////////////////////////////////////////////////////// TARGETNAME=btenum TARGETTYPE=LIBRARY RELEASETYPE=OAK COPYRES=1 TARGETDEFNAME=$(TARGETNAME) WINCETARGETFILES=$(_RELEASELIBDIR)\$(TARGETNAME).res SOURCES=btenum.cxx btenum.rc ////////////////////////////////////////////////////////////////////////// For the resoure.h I created, I define the IDD_DIALOG as 101, IDD_LABEL as 1000 and IDD_BUTTON as 1001. I successfully compile it with no errors and no warnings. But when I try to run it, it will show "GetLastError = 1814" when reach the part where the code is trying to call out the dialog box. I have checked out that 1814 means "The specified resource name cannot be found in the image file." But I am not sure what I did wrong here. Anybody out there tried to add dialog box to lib file before? Any idea? What is the correct way to do this? Thanks in advanced for your help. Best Regards, Candy Tag: DEBUGCHK error in smartcard Tag: 53530
  - 11
    - How to build my driver from the IDE? Hello, I'm using PB4.2 on a CEPC board. I've added my own driver to the my platform through a CEC file, but when I try to build it from the IDE (Build Selected Feature), the option is unavailable. Now I'm doing that through 'Open Build Release Directory' and typing 'Build' on the driver drirectory, but it is possible to do that from the IDE? Thanks in advance, Juan. Tag: DEBUGCHK error in smartcard Tag: 53528
  - 12
    - JTAG signal distance Hi, I'm using PXA263. and I struggle with JTAG problem. I want to know how much distance(from CPU to Connector) does it need to JTAG work well? We made a new board based on the previous board of which JTAG works well. So our new board's JTAG circuit is same as the previous board. Only the distance from CPU to connector is different from JTAG circuit. And Others(LCD, Audio)'s some different. The previous board's distance(from CPU to connector) is about 1 inch, and the new board is about 2 inch. But our new board's JTAG doesn't work well. Writing is successfull, But when it starts verifying, it fails. I don't know why. Does the distance may be a matter JTAG working? I need u. Tag: DEBUGCHK error in smartcard Tag: 53527
  - 13
    - how to play wave files through shell? hi all, i would like to know how to how to play wave [.wav] files through the shell command. i want to test run one wave file on my audio driver [unfified audio model], the wave files present in the platform are in the path, C:\WINCE420\PUBLIC\<platform name>\RelDir\<bsp name>Release few of the files are startup.wav exclam.wav and so on. i have tried to run one of these files using the commands: s wavplay startup.wav s wavplay windows\startup.wav here, i am not sure of the path at host for the wave file. the error message what i see at the debug windows reads as: s wavplay windows\startup.wav End s wavplay windows\startup.wav Run Programs: s wavplay windows\startup.wav 15650 PID:27fcd522 TID:47f7c2e2 Exception 002 Thread=87f70000 Proc=27fcd522 15651 PID:27fcd522 TID:47f7c2e2 AKY=00000013 PC=8080f500 RA=8080e01c BVA=00000700 15651 PID:27fcd522 TID:47f7c2e2 Process 'filesys.exe' 15652 PID:27fcd522 TID:47f7c2e2 KPSLExceptionHandler: flags=0 ControlPc=808189c8 15652 PID:27fcd522 TID:47f7c2e2 ERROR: c:\wince420\private\winceos\coreos\nk\kernel\schedule.c line 5041: 15652 PID:27fcd522 TID:47f7c2e2 Abandoning CS 80938fa0 in PuntCritSec 15657 PID:47f7c052 TID:47f7c2e2 Error opening windows\startup.wav. Error code = 0x00000002 15657 PID:47f7c052 TID:47f7c2e2 ReadWaveFile failed. mr=00000001 can anybody show me the right way to run wave files? and what does this error code[0x00000002] say Error opening windows\startup.wav. Error code = 0x00000002 thanking you in advance regards avagundam Tag: DEBUGCHK error in smartcard Tag: 53526
  - 14
    - KITLSend() :: Reentrancy problem hi guys, I am in the process of developing KITL support for WinCE on a MIPS based platform. Currently, my board is booting up fine and kernel debugger et al are able to connect properly..But the system is pretty unstable and it is throwing lots of exceptions. Before KITL implemention, there were hardly any exceptions.... 1. Is there any issue associated with KITL that could directly result in exceptions in different modules...? the pblm here is that it is not one single exe or module that is giving exception..it is pretty random...and sometimes, everything works fine for a while...and then crashes....and sometimes it just runs... 2. Some of the crashes are accompanied by the following message :: !KITLSend(DBGMSG): Reentrant call, hTh:C7FD3C72 AKY=00000001 PC=808095c4 RA=8080636c BVA=07000000 !KITLSend(DBGMSG): Reentrant call, hTh:C7FD3C72 Process 'NK.EXE' !KITLSend(DBGMSG): Reentrant call, hTh:C7FD3C72 Exception 002 Thread=87fd3a08 Proc=07fdf002 !KITLSend(DBGMSG): Reentrant call, hTh:C7FD3C72 AKY=00000001 PC=808095c4 RA=8080636c BVA=07000000 !KITLSend(DBGMSG): Reentrant call, hTh:C7FD3C72 Process 'NK.EXE' !KITLSend(DBGMSG): Reentrant call, hTh:C7FD3C72 Secondary thread in proc 07fdf002 (NK.EXE) faulted! !KITLSend(DBGMSG): Reentrant call, hTh:C7FD3C72 Terminating process 07fdf002 (NK.EXE)! Any idea what could be causing this ?? This messages is coming from the function KITLSend in coreos\nk\kitl\Edbgprot.c cheers, joseph garibaldi. Tag: DEBUGCHK error in smartcard Tag: 53519
  - 15
    - Win CE remote controllers Hi, I'm new to Win CE so please forgive me if my questions are too basic for this forum, or if they are perhaps asked in a strange way. I'd like to find out - what remote controllers there are for Windows CE machines? - what are the best controllers in terms of easy to use and robustness? - what software is there for editing the mapping of keys to certain applications? Are there free software to download, trials etc to evaluate etc? Thanks, Thomas Tag: DEBUGCHK error in smartcard Tag: 53516
  - 16
    - RAM used when an image is loaded We are using CE 4.2 on proprietary X86 hardware and have been using the size of the nk.bin in the release folder as an estimate for the RAM used when the image is loaded but before our apps run (not XIP and not compressed). I recently ran viewbin on the image and found that the the sum of the file and module sizes was 600 KB larger than the actual nk.bin size. This raises a number of questions: 1. What is the cause for this difference? Is viewbin incorrect, are files/modules actually compressed,etc.? 2. Is there some way to get an accurate estimate for the amount of RAM used when an image is loaded? Tag: DEBUGCHK error in smartcard Tag: 53515
  - 17
    - kitl cannot work select the thin client . after download debug window print as these: Kernel debugger connected (KDBG stream opened). Kernel Version 1169 loaded at 0x8c200000, data relocated at 0x8e006000 Debugger connection established (Target CPU is ARM). Loaded symbols for 'D:\WINCE420\PUBLIC\PGTCS619\RELDIR\SAMSUNG_SMDK2410_ARMV4DEBUG\NK.EXE' Loaded symbols for 'D:\WINCE420\PUBLIC\PGTCS619\RELDIR\SAMSUNG_SMDK2410_ARMV4DEBUG\KD.DLL' £»£»£»£»£» and other load info. and the serial output is : 0xAFEDF23E: KITLSend(0): Timed out waiting for ack (AckExpected: 27, TxSeq: 35) !OEMEthSendFrame !OEMEthSendFrame !OEMEthSendFrame .... why it cannot use kitl and cannot use the debug shell, it use the cs8900 netcard. anyone can explain these, thanks. Tag: DEBUGCHK error in smartcard Tag: 53512
  - 18
    - why gwes.exe do not run after i select the thin client feature and use the cs8900 and download to the board. from the debug window, i cannot find the gwes.exe run and cannot find the module ati_ddi.dll. i select the ati display driver. and add this this lines in the config file: in platform.bib: IF BSP_NODISPLAY ! ddi_ati.dll $(_FLATRELEASEDIR)\ddi_ati.dll NK SH ENDIF BSP_NODISPLAY ! in platform.reg add these: ; @CESYSGEN IF CE_MODULES_DISPLAY IF BSP_NODISPLAY ! [HKEY_LOCAL_MACHINE\Drivers\Display\ATI] "DisplayDll"="ddi_ati.dll" "Class"=dword:03 "SubClass"=dword:00 "ProgIF"=dword:00 "VendorID"=dword:1002 "DeviceID"=dword:4752 [HKEY_LOCAL_MACHINE\System\GDI\Drivers] "Display"="ddi_ati.dll" ; GWES will pass this value to the LCD driver; the driver will open the ; key to which it points to read its configuration. [HKEY_LOCAL_MACHINE\System\GDI\DisplayCandidates] "Candidate10"="Drivers\\Display\\ATI" ENDIF BSP_NODISPLAY ! ; @CESYSGEN ENDIF CE_MODULES_DISPLAY why cannot see the gwes.exe run, neither can see debug info tells load ati_ddi.dll , anyone can tell me. thanks. Tag: DEBUGCHK error in smartcard Tag: 53511
  - 19
    - how to play .wav file from host hi all, i would like to know how to play .wav files [path] from the host, through the shell command. my platform KITL is up, and working to some extent. i would like to know that whether is there any requirment to recognize the host file system, so that host can play .wav file on the platform??? thanking you in adv. regards sajid Tag: DEBUGCHK error in smartcard Tag: 53509
  - 20
    - romboot boot.bib I am attempting to put together a romboot image for a Geode (SC3200) design under CE 4.2. I do not believe I am correctly generating the image. Here are my details: Flash memory located in address space 'FFF0.0000' to 'FFFF.FFFF' (1MB). Boot.bib entries: MEMORY BOOT 00060000 00100000 RAMIMAGE RAM 00024000 0003C000 RAM STARTUP FFFF0000 0000FFFF RESERVED CONFIG ROMOFFSET=FFEA0000 ROMSTART=60000 ROMSIZE=100000 ROMWIDTH=32 X86BOOT=FFFF0020 Startup.asm contains the label: ResetVectorAddr LABEL DWORD dd 0150000h As I understand it, these values would do the following: Start the processor with the StartUp proc at FFFF.0000 as x86 demands. The executable is relocated to 0006.0000, which will be appropriate once copied to RAM. However, this is offset to FFF0.0000 for the function jumps preceding the copy to RAM. Unfortunately, I have no confidence that I understand this properly, nor do I find the documentation to be of any help. Can anyone enlighten me? Thanks, -EN Tag: DEBUGCHK error in smartcard Tag: 53508
  - 21
    - How to detect an application's status. Dear all: What I develop is a common platform, which let third party's application run on it. But sometimes, some applications may come into dead loop or other wrong status, which may occupy so much CPU time. What I want to do is detect these applications and teminate them. Are there exist logic to enum these applications ? Thanks you very much. Jack. Tag: DEBUGCHK error in smartcard Tag: 53507
  - 22
    - VMINI and CETK Hi All, I am using only one ethernet port for downloading the image ,and for KITL. When I run clientside.exe for CETK tests, I can't achieve connectivity between client and server. Is the problem because of using the ethernet port for KITL? If I include VMINI driver for ethernet sharing , will I be able to achieve the needful? Please help me. Regards, Joseph Tag: DEBUGCHK error in smartcard Tag: 53499
  - 23
    - cannot update cs8900 lib hi sir: i am using smdk2410 pakage in pb42, when i update the cs8900, add comment, why it always cannot work. but only once a time it sucess, though i remove the project\lib. and the common\oak lib of the cs8900. can anyone tell this, thanks. Tag: DEBUGCHK error in smartcard Tag: 53497
  - 24
    - WinCE QFE releases for the week of June 14 - June 18, 2004 The following updates for Windows CE have been recently released and are available for download. More information for each update is provided in the Readme document available after the individual update(s) has been installed. Windows CE .NET 4.2 Update name: Windows CE .NET 4.2 Platform Builder QFE 040601_KB839926 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=E9B1BFF6-7CEA-4805-B43E-86E471A30293&displaylang=en Component: CEMGR Description: When debugging an application via the ActiveSync and stopping the debug process while the application still runs, eVC 4.0 may hang. A message "Server is busy" will be displayed. Update name: Windows CE .NET 4.2 Platform Builder QFE 040602_KB826381 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=18E03F02-43F5-4924-BF9A-2EA7898D0EE4&displaylang=en Component: Kernel, CELOG Description: An untrusted application cannot be used with CeLog that may log worthless data for the timestamp. Update name: Windows CE .NET 4.2 Platform Builder QFE 040608_KB840666 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=F72E927A-45D0-417A-A2F1-DC371D65540B&displaylang=en Component: IPv6 Description: When using a hive based registry, Windows CE .NET 4.2 may overwrite IPv6 Global Parameters upon a warm reset of the device. Update name: Windows CE .NET 4.2 Platform Builder QFE 040608_KB842653 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=F7D77040-AB69-4A13-BF1A-17F4C8E182E4&displaylang=en Component: MSHTML Description: Attaching a file from a directory other than the root to an email message composed using web-based email form may deliver the file truncated. Update name: Windows CE .NET 4.2 Platform Builder QFE 040610_KB843041 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=1CFAF9F4-D668-46E8-897C-4816E9A38D8A&displaylang=en Component: RDP Description: When connecting to a terminal server via an RDP client, the client's default printer may be shuffled to a different printer. This may cause a user's documents to be printed to a different location than expected. Update name: Windows CE .NET 4.2 Platform Builder QFE 040611_KB842655 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=0FAF0AA7-F4D9-4B81-B407-D52798FB87D5&displaylang=en Component: FAL, FATFS Description: The FATFS cache buffer may get re-used for MSFLASH read of unmapped sector. The data buffer may not get cleared resulting in some issues if the buffer contains valid data from a previous request. Update name: Windows CE .NET 4.2 Platform Builder QFE 040611_KB835697 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=E2EBBDD9-4E9A-4A5F-BF79-B1BEDB2D8FDF&displaylang=en Component: MFC Description: This update fixes a memory leak in wce_RegGetMiscStatus. Update name: Windows CE .NET 4.2 Platform Builder QFE 040611_KB835854 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=F5198709-6566-462B-804F-88131DDD0819&displaylang=en Component: Kernel Description: This update corrects first chance exceptions handling in a dialog procedure and allows them to be passed to the Just-In-Time (JIT) debugger. Update name: Windows CE .NET 4.2 Platform Builder QFE 040611_KB843624 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=45D8C304-3007-4AA5-8347-5BCD3E1C9FC0&displaylang=en Component: WININET Description: If index.dat does not exist or is corrupted, a new index.dat and cache folders will be created. The old cache folders may not get deleted if they contain no cached files. Download Link - directs you to the Microsoft Download Center page associated with each update. Each update is contained in a self-extracting compressed file. Component - displays the module(s) updated in each QFE Description - provides more information on the issue(s) fixed **DO NOT REPLY - THIS E-MAIL IS BEING SENT TO YOU FROM AN UNMONITORED ACCOUNT. Due to Microsoft's security requirements, the hyperlink(s) contained in this e-mail may not automatically open your browser. If you experience any difficulty, please copy the link and paste into your browser. ** Tag: DEBUGCHK error in smartcard Tag: 53492
  - 25
    - NK_NKNOCOMP I am using CE 4.2 and the config.bib file contain the following lines. ; @CESYSGEN IF !NK_NKNOCOMP COMPRESSION=ON ; @CESYSGEN ENDIF !NK_NKNOCOMP ; @CESYSGEN IF NK_NKNOCOMP COMPRESSION=OFF ; @CESYSGEN ENDIF NK_NKNOCOMP By removing them and setting COMPRESSION=ON, the nk.bin size remains unchanged. When COMPRESSION=ON is set and the image rebuilt, it is larger by ~ .5 MB. This indicates that !NK_NKNOCOMP is true. What is the correct way to set NK_NKNOCOMP - by some PB configuration setting, by setting it in the environment settings or some other way? Tag: DEBUGCHK error in smartcard Tag: 53490

when I load smartcard driver and initialize driver,the following error
occurs "0x8bc15430: SCard: DEBUGCHK failed in file
d:\mckendric\private\winceos\drivers\smartcrd\scard\reader.cpp at line 485 "

Could anyone who hold full kernel source codes tell me the situation at line
485 in reader.c.

Thx!

Top