Use of CryptoMemory

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - FTP server on WinCe 5 hello, is available an FTP server for windows ce that support XMD5 command ? thanks stefano Magni Tag: Use of CryptoMemory Tag: 113175
  - 2
    - The behavior of CD/DVD ROM in WinCE600 I modified an ATA driver to an ATAPI driver as below: The old ATA driver only support one IDE hard disk on the board. 1) Add AtapiIoctl() to process CD/DVD IOCTL which is similar to \WINCE600\PUBLIC\COMMON\OAK\DRIVERS\BLOCK\ATAPI\atapipcicd.cpp; 2) Modified "HDProfile"="HDProfile" to "CDProfile"="CDProfile" under [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\ATA] in platform.reg; 3) Add Core OS->CEBASE->File systems and Data Store->Storage Manager- >CD/UDFS File System. Now only connect one IDE CD/DVD ROM on the board (no hard disk), the ATAPI driver can detect and read data from IDE CD/DVD ROM. The "CDROM Drive" folder is shown in the WinCE explorer. But there are no "Eject" option in the "File" menu of explorer, after press button on CD/DVD ROM to eject the CD, the "CDROM Drive" folder disappeared. Also when put an Audio CD(i.e. cda file), the media player can not play the whole CD like an Audio CD, it need click on each cda file to play just like a data CD. So the behavior of CD/DVD ROM in WinCE600 looks like a removable disk, not like the CD/DVD ROM in the PC? Is it right or is there any mistake in my modification? The CD/DVD ROM is SAMSUNG DVD-ROM DRIVE SH-D162D(TS-H352D). Thanks for any guidance. Tag: Use of CryptoMemory Tag: 113173
  - 3
    - PCIBUS.dll is getting detached Dear All, Using WINCE5.0 on ARM9, Trying to bring up PCI interface on our board. I have connected a RTL8139 card to the PCI bus Slot 0 My PCIBUS.dll is not loading the RTL8139.dll. Iam not doing any initialization WRT to PCI in bootloader. PCIBUS.DLL is properly reading RTL8139 configspace but not loading RTL8139.dll. Below is the WINCE DUMP ***************************************************************************= =AD ************************************************* Booting Windows CE version 5.00 for (ARM) &pTOC =3D 88073074, pTOC =3D 884533d0, pTOC->ulRamFree =3D 88673000, MemForPT =3D 00000000 Old or invalid version stamp in kernel structures - starting clean! Configuring: Primary pages: 5114, Secondary pages: 0, Filesystem pages =3D 2557 Booting kernel with clean memory configuration: Memory Sections: [0] : start: 88674000, extension: 00002000, length: 013fa000 Sp=3Dffffc7cc ARMInit done. Windows CE KernelInit Updated eptr->e32_vsize to =3D 000a9000 Scheduling the first thread. 0x89a6f024: KernelInit2: pCurThread=3D89a6f024 hCurThread=3D09a6f266 hCurProc=3D09a6f002, KernelInit =3D 88095a78 0x89a6f024: Detecting VFP...0x89a6f024: VFP Not Found! 0x89a6f024: Updated eptr->e32_vsize to =3D 00006000 0x89a6f024: Updated eptr->e32_vsize to =3D 00029000 +IOCTL_HAL_GET_DEVICE_INFO + SPI_GETOEMINFO +IOCTL_HAL_GET_DEVICE_INFO +SPI_GETPLATFORMTYPE +IOCTL_HAL_GET_DEVICE_INFO + 0x89a6f024: Updated eptr->e32_vsize to =3D 00009000 0x89a6f024: Updated eptr->e32_vsize to =3D 00022000 0x89a6f024: ERROR: c:\macallan\private\winceos\coreos\nk\kernel \kwin32.c line 777: 0x89a6f024: ConnectDebugger failed 0x89a6f024: Updated eptr->e32_vsize to =3D 00005000 0x89a6f024: CeLog: +Init 0x89a6f024: CeLog: Large buffer size unspecified, using default size 0x89a6f024: CeLog: Small buffer size invalid or unspecified, using default size 0x89a6f024: CeLog: -Init 0x89a6f024: CeLog Zones : CE =3D 0xCFBFFFFF, User =3D 0xCFBFFFFF, Proc =3D 0xFFFFFFFF 0x89a6f024: New CeLog DLL is now live! (1 total) 0x89a6f024: first =3D 01fb0000, last =3D 02000000, SharedDllBase =3D 03b30000 +IOCTL_HAL_POSTINIT 0x89a3bcc0: CertMod.dll not found, using old OEM Trust Model 0x89a3bcc0: FileSystem Starting - starting with clean file system +IOCTL_HAL_INIT_RTC 0x89a3bcc0: FS: initializing ROM/RAM file system 0x89a3bcc0: SC_CreateAPIHandle: pvData =3D=3D NULL 0x89a3bcc0: FS: Registering file system ROM, index 2, flags 0x00000031 0x89a3bcc0: FS: Mount complete (ROM, index 2, flags 0x00000031) 0x89a3bcc0: Succeeded on CheckFile 0x89a3bcc0: RestoreFile(0x09a26cd2) called fDelete =3D TRUE 0x89a3bcc0: FS: Registering file system StoreMgr, index 3, flags 0x00000001 0x89a3bcc0: FSREG: Unable to read value "NoDefaultUser" under HKEY_LOCAL_MACHINE\init\BootVars 0x89a3bcc0: FSREG: Logging in default user. 0x89a3bcc0: FSREG: Unable to read value "DefaultUser" under HKEY_LOCAL_MACHINE\init\BootVars 0x89a3bcc0: SetCurrentUser: Logging out (nobody), logging in default 0x89a3bcc0: BuildPath: Documents and Settings 0x89a3bcc0: BuildPath: Documents and Settings\default 0x89a3bcc0: SetCurrentUser: User hives not supported -- using same registry for all users 0x89a3bcc0: FSREG: Unable to read value "DBFlags" under HKEY_LOCAL_MACHINE\init\BootVars 0x89a3bcc0: Initializing Database 0x89a3bcc0: DB:Validation: Name already exists DB_notify_events 0x89a3bcc0: DB:CeCreateDatabase failed 0x89a3bcc0: Filesystem initialized! 0x89a3bcc0: FILESYS: Waiting for kernel to be ready to launch apps 0x89a3b640: InitMUI: DISABLED (-1039729896) 0x89a3bcc0: FS: Creating signal event SYSTEM/DevMgrApiSetReady 0x89a3bcc0: FILESYS: Launching apps 0x89a3bcc0: FILESYS: Launching device.exe 0x89a1f8a0: *** DLL_PROCESS_ATTACH - Current Process: 0x42, ID: 0x9a1fb06 *** 0x89a1f8a0: +InitDeviceFileSystems 0x89a1f8a0: FS: Registering file system $device, index 4, flags 0x00000001 0x89a1f8a0: FS: Registering file system $bus, index 5, flags 0x00000001 0x89a1f8a0: -InitDeviceFileSystems: status is 1 0x89a1f8a0: Ceddk!CalibrateStallCounter: Enter 0x89a1f8a0: DEVICE!DevloadInit 0x89a1f8a0: DEVICE!InitDevices: Root Key is Drivers\BuiltIn. 0x89a1f8a0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers \BuiltIn\Prefix) returned 2 0x89a1f8a0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers \BuiltIn\BusPrefix) returned 2 0x89a1f8a0: CardBus.DLL DLL_PROCESS_ATTACH 0x89a1f8a0: BusEnum::BusEnum (ActivateRegPath=3DDrivers\Active \4294967280) 0x89a1f8a0: +AssignChildDriver!!! 0x89a1f8a0: -AssignChildDriver!!! 0x89a1f8a0: !!!Open 0x89a1f8a0: !!!Open Success 0x89a1f8a0: IOControl!!! 0x89a1f8a0: +PostInit!!! 0x89a1f8a0: +ActivateAllChildDrivers!!! 0x89a1f8a0: ActivateChild: Template reg path is Drivers\BuiltIn\NDIS 0x89a1f8a0: ActivateChild: Template reg path is Drivers\BuiltIn\AFD 0x89a1f8a0: ActivateChild: Template reg path is Drivers\BuiltIn\PCI 0x89a1f8a0: BusEnum::ActivateChild load device driver at order 0 0x89a1f8a0: BusEnum::ActivateChild load device driver at order 2 0x89a1f8a0: DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Drivers\BuiltIn\AFD). Dr iver cannot be unloaded. 0x89a1f8a0: CXPORT:dllentry ProcessAttach 0x89a1f8a0: CXPORT:+GetRegSettings 0x89a1f8a0: CXPORT:-GetRegSettings 0x89a1f8a0: CXPORT:InitBlockPool - Pool(16), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(32), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(48), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(64), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(96), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(128), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(256), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(356), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(476), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(512), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(1024), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(1600), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(2048), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(4096), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(8192), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(-1), limit 20000 bytes 0x89a1f8a0: Can't load library ppp.dll 0x89a1f8a0: !AFD:AfdInitialize: Can't open Registry key Comm\AFD -- creating 'Stacks' entry 0x89a1f8a0: NDIS: RebindAdaptersOnResume =3D 0 0x89a1f8a0: NDIS: PcmciaNeedsMapToScrap =3D 0 0x89a1f8a0: TCPIP: dllentry() 0x89a1f8a0: TCPIP.Register() 0x89a1f8a0: *** New TcpStack *** 0x89a1f8a0: +IPInit() 0x89a1f8a0: +IPGetConfig 0x89a1f8a0: -IPGetConfig: Ret: 0x706B0 0x89a1f8a0: Dhcp: dllentry() -1986273776 0x89a1f8a0: +DhcpRegister: 0x89a1f8a0: -DhcpRegister: Ret =3D 35270 0x89a1f8a0: IPInit: registered w/ DHCP 0x89a1f8a0: IPInit: Unable to Load IPSEC 0x89a1f8a0: IGMPDelInclList: AddrPtr=3D710e0 NumDelSources=3D0 DelSourceList=3D0 0x89a1f8a0: -IPInit [SUCCESS] 0x89a1f8a0: +TCPGetConfigInfo 0x89a1f8a0: -TCPGetConfigInfo 0x89a1f8a0: DEVICE!RegReadActivationValues RegQueryValueEx(TCPIP \IPDevice\BusPrefix) returned 2 0x89a1f8a0: +IPD_Init(602deb0) 0x89a1f8a0: DEVICE!RegReadActivationValues RegQueryValueEx(TCPIP \TCPDevice\BusPrefix) returned 2 0x89a1f8a0: +TCP_Init(602deb0) 0x89a1f8a0: TCPIP.About to register 0x89a1f8a0: !AFD: Unable to load library 'tcpip6.dll' 0x89a1f8a0: !AFD: Unable to load library 'irdastk.dll' 0x89a1f8a0: !AFD: Unable to load library 'btd.dll' 0x89a1f8a0: !AFD: Unable to load library 'Redir.dll' 0x89a1f8a0: !AFD: Unable to load library 'IPNat.dll' 0x89a1f8a0: Ws2Instl dllentry() -1986396552 0x89a1f8a0: Ws2Instl:IsStackInstalled - LoadLibrary(irdastk) failed 126 0x89a1f8a0: Ws2Instl:IsStackInstalled - LoadLibrary(btd) failed 126 0x89a1f8a0: Ws2Instl:IsStackInstalled - LoadLibrary(tcpip6) failed 126 0x89a1f8a0: !AFD: Unable to load library 'DhcpV6L.dll' 0x89a1f8a0: *TCPIP:ReadyToGo 0x89a1f8a0: +ARPInit() 0x89a1f8a0: -ARPInit [0] 0x89a1f8a0: !AFD: Unable to load library 'tcpip6.dll' 0x89a1f8a0: !AFD: Unable to load library 'irdastk.dll' 0x89a1f8a0: !AFD: Unable to load library 'btd.dll' 0x89a1f8a0: !AFD: Unable to GetProcAddress of ReadyToGo in 'Netbios' 0x89a1f8a0: !AFD: Unable to load library 'Redir.dll' 0x89a1f8a0: !AFD: Unable to GetProcAddress of ReadyToGo in 'Dhcp' 0x89a1f8a0: !AFD: Unable to load library 'IPNat.dll' 0x89a1f8a0: !AFD: Unable to GetProcAddress of ReadyToGo in 'Ws2Instl' 0x89a1f8a0: !AFD: Unable to load library 'DhcpV6L.dll' 0x89a1f8a0: AFD: Initialization Complete 0x89a1f8a0: BusEnum::ActivateChild load device driver at order 4 0x89a1f8a0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers \BuiltIn\NDIS\BusPrefix) returned 2 0x89a1f8a0: NDIS:: CE_DeleteBusFriendlyNames() failed deleting [HKLM \Comm\BusFriendlyNames] 0x89a1f8a0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers \BuiltIn\PCI\Prefix) returned 2 0x89a1f8a0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers \BuiltIn\PCI\BusPrefix) returned 2 0x89a1f8a0: PCIBUS!DllMain: process attach 0x89a1f8a0: PCIBUS!PCICfg+(Drivers\BuiltIn\PCI, BusNumberBase 0x0, BusNumberLength 0x1 MemBase 0xB0000000, Mem Len 0x4000000, IoBase 0x80000000, IoLen 0x4000000) 0x89a1f8a0: PCIBUS!PCICfg(Drivers\BuiltIn\PCI, PrefetchMemBase 0x90000000, PrefetchMemLen 0x8000000) 0x89a1f8a0: PCIBUS!PCICfgBus+(Bus 0) 0x89a1f8a0: PCIBUS!PCICfgDevice+(Bus 0, Device 0, Function 0, Vendor ID 0x10EC, Device ID 0x8139) 0x89a1f8a0: PCIBUS!RegMatch+(Drivers\BuiltIn\PCI\Instance, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatch RegOpenKeyEx(Drivers\BuiltIn\PCI \Instance) returned 2. 0x89a1f8a0: PCIBUS!RegMatch+(Drivers\BuiltIn\PCI\Template, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatch 1 devices to search 0x89a1f8a0: PCIBUS!RegMatch RegEnum =3D 0 0x89a1f8a0: PCIBUS!RegMatchOne+(Drivers\BuiltIn\PCI\Template, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatchOne Checking key Drivers\BuiltIn\PCI \Template\MYNIC. 0x89a1f8a0: PCIBUS!RegMatchOne Match for Class (0x2) found. 0x89a1f8a0: PCIBUS!RegMatchOne Match for SubClass (0x0) found. 0x89a1f8a0: PCIBUS!RegMatchOne Match for ProgIF (0x0) found. 0x89a1f8a0: PCIBUS!RegMatchOne: Match for VendorID (0x10EC), DeviceID (0x8139) found. 0x89a1f8a0: PCIBUS!PCICfgFindMatch: Matched device 0/0/0 with registry key 'Drivers\BuiltIn\PCI\Template\MYNIC ' 0x89a1f8a0: PCIBUS!PCICfgCheckBARs+(Bus 0, Device 0, Function 0) 0x89a1f8a0: PCIBUS!PCICfgCheckBars: BAR(0/0/0): Offset 0x10, Type I/ O, Size 0x100 0x89a1f8a0: PCIBUS!PCICfgCheckBars: BAR(0/0/0): Offset 0x14, Type Memory, Size 0x100 +IOCTL_HAL_REQUEST_IRQ 0x89a1f8a0: PCI OEMGetInterrupt: Irq 0 0x89a1f8a0: RequestIrq(0/0/0) returns 0 0x89a1f8a0: HalSetBusDataByOffset. 0x89a1f8a0: HalSetBusDataByOffset. 0x89a1f8a0: HalGetBusDataByOffset. 0x89a1f8a0: HalSetBusDataByOffset. 0x89a1f8a0: PCIBUS!PCICfgDevice- 0x89a1f8a0: PCIBUS!PCICfgBus-(Bus 0, SubBus 0, MemSize 0x100, IoSize 0x100, PrefetchMemSize=3D0x0) 0x89a1f8a0: Mem List: 0x89a1f8a0: DEVICE: Bus/Device/Function 0/0/0, Offset 0x14, Base 0x0, Size 0x100, 0x89a1f8a0: I/O List: 0x89a1f8a0: DEVICE: Bus/Device/Function 0/0/0, Offset 0x10, Base 0x0, Size 0x100, 0x89a1f8a0: Prefetch Mem List: 0x89a1f8a0: PCIBUS!PCICfgAllocateMemSpace+(Bus 0, Base 0xB0000000, Size 0x4000000) 0x89a1f8a0: PCIBUS!PCICfgAllocMemSpace (Device): Bus 0, Device 0, Function 0, Offset 0x14, MemBase 0xB0000000, MemSize 0x100 0x89a1f8a0: HalSetBusDataByOffset. 0x89a1f8a0: HalGetBusDataByOffset. 0x89a1f8a0: HalSetBusDataByOffset. 0x89a1f8a0: PCIBUS!PCICfgAllocateMemSpace-(Bus 0) 0x89a1f8a0: PCIBUS!PCICfgAllocateIoSpace+(Bus 0, Base 0x80000000, Size 0x4000000) 0x89a1f8a0: PCIBUS!PciIinitAllocIoSpace (Device): Bus 0, Device 0, Function 0, Offset 0x10, IoBase 0x80000000, IoSize 0x100 0x89a1f8a0: HalSetBusDataByOffset. 0x89a1f8a0: HalGetBusDataByOffset. 0x89a1f8a0: HalSetBusDataByOffset. +0x89a1f8a0: PCIBUS!PCICfgAllocateIoSpace-(Bus 0) 0x89a1f8a0: PCIBUS!PCICfgAllocatePrefetchMemSpace+(Bus 0, Base 0x90000000, Size 0x8000000) 0x89a1f8a0: PCIBUS!PCICfgAllocateMemSpace-(Bus 0) 0x89a1f8a0: PCIBUS!PCICfg- 0x89a1f8a0: PCIBUS!PCIRegClean(Drivers\BuiltIn\PCI\Instance) 0x89a1f8a0: PCIBUS!PCIRegClean RegOpenKeyEx(Drivers\BuiltIn\PCI \Instance) returned 2. 0x89a1f8a0: PCIBUS!PCIEnum(Drivers\BuiltIn\PCI), Boot phase 1 0x89a1f8a0: HalGetBusDataByOffset. 0x89a1f8a0: PCIBUS!PCIGetBARs+(Bus 0, Device 0, Function 0) 0x89a1f8a0: PCIBUS!RegMatch+(Drivers\BuiltIn\PCI\Instance, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatch RegOpenKeyEx(Drivers\BuiltIn\PCI \Instance) returned 2. 0x89a1f8a0: PCIBUS!RegMatch+(Drivers\BuiltIn\PCI\Template, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatch 1 devices to search 0x89a1f8a0: PCIBUS!RegMatch RegEnum =3D 0 0x89a1f8a0: PCIBUS!RegMatchOne+(Drivers\BuiltIn\PCI\Template, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatchOne Checking key Drivers\BuiltIn\PCI \Template\MYNIC. 0x89a1f8a0: PCIBUS!RegMatchOne Match for Class (0x2) found. 0x89a1f8a0: PCIBUS!RegMatchOne Match for SubClass (0x0) found. 0x89a1f8a0: PCIBUS!RegMatchOne Match for ProgIF (0x0) found. 0x89a1f8a0: PCIBUS!RegMatchOne: Match for VendorID (0x10EC), DeviceID (0x8139) found. 0x89a1f8a0: PCIBUS!PCICfgFindMatch: Matched device 0/0/0 with registry key 'Drivers\BuiltIn\PCI\Template\MYNIC ' 0x89a1f8a0: PCIBUS!PCIReadBARs+(Bus 0, Device 0, Function 0) 0x89a1f8a0: PCIBUS!PCIReadBARs- 0x89a1f8a0: PCIBUS!PCIGetBARs- 0x89a1f8a0: PCIBUS!PCIInitDevice+(Bus 0, Device 0, Function 0) 0x89a1f8a0: PCIBUS!PCIRequestResources: I/O Resource Manager request for I/O range 0x80000000-0x800000FF 0x89a1f8a0: PCIBUS! Retrieve IRQ: 0x89a1f8a0: PCIBUS!PCIReg+(Drivers\BuiltIn\PCI, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatch+(Drivers\BuiltIn\PCI\Instance, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatch RegOpenKeyEx(Drivers\BuiltIn\PCI \Instance) returned 2. 0x89a1f8a0: PCIBUS!RegMatch+(Drivers\BuiltIn\PCI\Template, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatch 1 devices to search 0x89a1f8a0: PCIBUS!RegMatch RegEnum =3D 0 0x89a1f8a0: PCIBUS!RegMatchOne+(Drivers\BuiltIn\PCI\Template, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatchOne Checking key Drivers\BuiltIn\PCI \Template\MYNIC. 0x89a1f8a0: PCIBUS!RegMatchOne Match for Class (0x2) found. 0x89a1f8a0: PCIBUS!RegMatchOne Match for SubClass (0x0) found. 0x89a1f8a0: PCIBUS!RegMatchOne Match for ProgIF (0x0) found. 0x89a1f8a0: PCIBUS!RegMatchOne: Match for VendorID (0x10EC), DeviceID (0x8139) found. 0x89a1f8a0: PCIBUS!RegCopy+(Drivers\BuiltIn\PCI\Template\MYNIC, 0, 0, 0) 0x89a1f8a0: PCIBUS!OpenNonExistInstanceKey+(Drivers\BuiltIn\PCI \Instance\MYNIC) 0x89a1f8a0: PCIBUS!OpenNonExistInstanceKey-(Drivers\BuiltIn\PCI \Instance\MYNIC1) returns key 0x89a1f8a0: ---------------------------------------------------------------------------= =AD---- 0x89a1f8a0: Bus/Device/Function =3D 0/0/0, Ethernet Network Controller 0x89a1f8a0: VendorID =3D 0x10EC, DeviceID =3D 0x8139, Command =3D 0x0007, Status =3D 0x0290 0x89a1f8a0: RevisionID =3D 0x10, ProgIf =3D 0x00, SubClass =3D 0x00, BaseClass =3D 0x02 0x89a1f8a0: CacheLineSize =3D 0x00, LatencyTimer =3D 0x00, HeaderType =3D 0x00, BIST =3D 0x00 0x89a1f8a0: BaseAddresses: 0x89a1f8a0: 0x80000001 0xB0000000 0x00000000 0x00000000 0x00000000 0x00000000 0x89a1f8a0: CIS =3D 0x00000000, SubVendorID =3D 0x4554, SubSystemID =3D 0x434E 0x89a1f8a0: ROMBaseAddress =3D 0x00000000 0x89a1f8a0: InterruptLine =3D 0x00, InterruptPin =3D 0x01, MinGrant =3D 0x20, MaxLatency =3D 0x40 0x89a1f8a0: ---------------------------------------------------------------------------= =AD---- 0x89a1f8a0: !!!Open 0x89a1f8a0: !!!Open Success 0x89a1f8a0: BusEnum::BusEnum (ActivateRegPath=3DDrivers\Active \4294967284) 0x89a1f8a0: Pcibus.DLL : -CreatePciBus 0x89a1f8a0: PCIenum.cpp nit 0x89a1f8a0: AssignChildDriver 0x89a1f8a0: PciDeviceFolder 0x89a1f8a0: FindPCIPowerMgrInterface 0x89a1f8a0: Pcibus.DLL : -DeletePciBus 0x89a1f8a0: ~PciBusEnum 0x89a1f8a0: ~PciDeviceFolder 0x89a1f8a0: Close!!! 0x89a1f8a0: PCIBUS!DllMain: process detach 0x89a1f8a0: -ActivateAllChildDrivers!!! 0x89a1f8a0: -PostInit!!! 0x89a1f8a0: Close!!! 0x89a3bcc0: FILESYS: Launching services.exe 0x8999c000: IPDispatchDeviceControl returned Status 103 0x899979c8: NDIS:: CEPowerNotificationThread() exits!! 0x899976a0: HTTPD: DllMain attached 0x899976a0: HTTPD: Being called from executable <<\Windows \services.exe>> 0x899976a0: HTTPD:HTP_Init(0x00000001) 0x899976a0: HTTPD: Initializing web server: creating thread pool, initing interface mapping... 0x899976a0: HTTPD: Web Server supports the following components: ISAPI Extensions, ISAPI Filters, Authenticati on, SSL, 0x899976a0: HTTPD:IOControl(IOCTL_SERVICE_STARTED) creating global variales 0x899976a0: TELNETD: DllMain attached 0x899976a0: TELNETD: Caller executable =3D 1 0x899976a0: TEL_Init(1) 0x899976a0: TEL_IOControl(0x1FBE5DC, 17039404, 0x0, 0, 0x0, 0, 0x803EA10) 0x899976a0: TEL_IOControl(0x1FBE5DC, 17039404, 0x803EA7C, 16, 0x0, 0, 0x803E724) 0x899976a0: TEL_IOControl(0x1FBE5DC, 17039416, 0x803F05C, 4, 0x0, 0, 0x803EA10) 0x899976a0: TELNETD:TEL_IOControl(IOCTL_SERVICE_STARTED), setting state =3D SERVICE_STATE_ON 0x899976a0: FTPD: DllMain attached 0x899976a0: FTP_Init(0) 0x899976a0: FTPD: Starting Ftp server 0x89a3bcc0: FILESYS: Done launching apps 0x89a3bcc0: -DEVICE!DevloadPostInit 0x89a3bcc0: This device has booted 1 times !!! 0x899714a8: HTTPD: Initializing log files 0x899714a8: HTTPD: Unable to load \windows\secur32.dll, GLE=3D0x0000007e ***************************************************************************= =AD ************************ Any Help in this regard is much Appreciatable Thanks in Advance -Anand Tag: Use of CryptoMemory Tag: 113166
  - 4
    - 128M sdram issues hi,everyone I am upgrading my sdram configuration for 128M, Frist of all,I show my platform, CPU : Xscale pxa255 OS : Windows CE .Net 4.2 Flash : 32MB SDRAM : 128MB (32MBX4) since I have heard that it only spend 2 hours on this issue, why it cost me more than one week to solve the problem... Okay,let's see the process. I modified some files related, config.bib,memdefs.h,memmap.inc,xsc1.h,xsc1.inc,xsc1bd.h,xsc1bd.inc, fwxsc1.s,platform.reg.(if i missed some file,pls tell me) At first,i always modified all of files related, then the kernel hung...I can not find where is the problem, so,I modified some files step by step, I just changed OEMAddressTable in memmap.inc, DCD 0x80000000, 0xA0000000, 64 to DCD 0x80000000, 0xA0000000, 128 and I also modified xsc1bd.inc, MDCNFG_VAL EQU 0x19C119C1; SDRAM Config Reg (CL=2) to MDCNFG_VAL EQU 0x19C319C3; SDRAM Config Reg (CL=2) then,sdram register MDCNFG enable the bank1 which is also 64MB. After two changes above,I download the kernel,it still works. Then,I just modified config.bib MEMORY IF IMGFLASH ! NK 800B8000 02000000 RAMIMAGE ; SDRAM 32MB: [800B 8000 -> 820B 7FFF] RAM 820B8000 01C00000 RAM ; SDRAM 28MB: [820B 8000 -> 83CB 7FFF] EDBG 83F8D000 00020000 RESERVED ; x20000 for EBOOT - 3 Client memory pools of 24K (128K) ENDIF AUD_DMA 83CB8000 0000A000 RESERVED SLEEP_SAV 83CC2000 00001000 RESERVED DRV_GLB 83CC3000 00001000 RESERVED CACHE_FLG 83CC4000 0003C000 RESERVED ; for use by cache routines: 83CC_4000->83CC_4003 used for flagging. 83CC_4004->83CC_4803 rsvd for miniD DISPLAY 83D00000 00130000 RESERVED ; 1MB aligned BLOCK_BUF 83E30000 00080000 RESERVED UNUSED_BUF 83EB0000 000DD000 RESERVED whql_sig 00000001 00002000 EXTENSION ; WHQL signature extension (6KB). ZBANK 86000000 00100000 RESERVED to IF IMGFLASH ! NK 800B8000 02000000 RAMIMAGE ; SDRAM 32MB RAM 820B8000 05C00000 RAM ; SDRAM 28MB+64MB EDBG 87F8D000 00020000 RESERVED ; x20000 for EBOOT - 3 Client memory pools of 24K (128K) ENDIF AUD_DMA 87CB8000 0000A000 RESERVED SLEEP_SAV 87CC2000 00001000 RESERVED DRV_GLB 87CC3000 00001000 RESERVED CACHE_FLG 87CC4000 0003C000 RESERVED ; for use by cache routines: 83CC_4000->83CC_4003 used for flagging. 83CC_4004->83CC_4803 rsvd for miniD DISPLAY 87D00000 00130000 RESERVED ; 1MB aligned BLOCK_BUF 87E30000 00080000 RESERVED UNUSED_BUF 87EB0000 000DD000 RESERVED whql_sig 00000001 00002000 EXTENSION ; WHQL signature extension (6KB). ZBANK 8A000000 00100000 RESERVED and also changed the other related addresses in memdefs.h,xsc1.h,xsc1.inc,xsc1bd.h,xsc1bd.inc. for instance: i modified #define MEM_BASE_PHYSICAL 0xA3CB8000 #define MEM_BASE_C_VIRTUAL 0x83CB8000 #define EDBG_PHYSICAL_MEMORY_START 0x83F8D000 // Ethernet Debugger Pool Address to #define MEM_BASE_PHYSICAL 0xA7CB8000 #define MEM_BASE_C_VIRTUAL 0x87CB8000 #define EDBG_PHYSICAL_MEMORY_START 0x87F8D000 // Ethernet Debugger Pool Address It seems that all the PHYSICAL address should not be modified, I try it before,but also do not work out.. so at last,I made the above change. And during these days,I also tried to debug images, but it just hung as the release image.. anyway,my system hung here: ****** Downloading operating system image for SDRAM target ****** TFTP: Desktop losing ACK, block number = 54250, Ack again rom_offset=0x0. Found pTOC signature. ROMHDR at Address 800B8044h RomHdr.ulRAMStart=81C50000h RomHdr.physfirst=800B8000h. Done. Writing 0x80076BD8 to flash address 0xBC340000 (length=0xA40). Sector=0x200 (Length=0x6) Block=0x1 (Length=0x1). Handling non-block aligned data... FlashErase: Unlocking flash block(s) [0x1, 0x1] (please wait): Done. Erasing flash block(s) [0x1, 0x1] (please wait): .Done. Writing to flash (please wait): Done. Got EDBG_CMD_JUMPIMG Got EDBG_CMD_CONFIG, flags:0x00000000 Download successful! Jumping to image at physical 0xA00B9000... Begin ****************************************************** ****************************************************** ****************************************************** ****************************************************** ****************************************************** OEMInitDebugSerial using UART2 Windows CE Kernel for ARM Built on Mar 13 2003 at 22:54:19 ProcessorType=02d0 Revision=6 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 800b9ef8 Sp=ffffc7cc /////////////////////////////////////// and the debug kernel output here: normal 64M: Download successful! Jumping to image at physical 0xA00B9000... Begin ****************************************************** ****************************************************** ****************************************************** ****************************************************** ****************************************************** OEMInitDebugSerial using UART2 Windows CE Kernel for ARM Built on Mar 13 2003 at 22:43:27 ProcessorType=02d0 Revision=6 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 800b9ef4 +OEMKitlInit (D) Before OEMEthInit (D)(OEMEthInit) Checking CS8900A Devices.. CS8900A Ethernet Controller Already Initilaized: OK VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes Tx buffer [0xA2D302E0] to [0xA2D342E0]. [0xA2D2C2C0] to [0xA2D302C0]. ridge:: NK add MAC: [0-B-29-FF-55-66] p Driver_Globals (ether stuff only) at : 0xA3CC3000 pDriverGlobals->eth.EbootMagicNum= 0x45424F54 pDriverGlobals->eth.etherEnabled= 0x0 pDriverGlobals->eth.etherFlags= 0x0 pDriverGlobals->eth.TargetAddr.dwIP= 0x508412AC pDriverGlobals->eth.TargetAddr.wMAC= 0xA3CC3910 pDriverGlobals->eth.TargetAddr.wPort= 0xD403 pDriverGlobals->eth.DownloadHostAddr.dwIP= 0x5B8412AC pDriverGlobals->eth.DownloadHostAddr.wMAC= 0xA3CC3920 pDriverGlobals->eth.DownloadHostAddr.wPort= 0x1E04 pDriverGlobals->eth.DbgHostAddr.dwIP= 0x0 pDriverGlobals->eth.DbgHostAddr.wMAC= 0xA3CC392C pDriverGlobals->eth.DbgHostAddr.wPort= 0x0 pDriverGlobals->eth.KdbgHostAddr.dwIP= 0x0 pDriverGlobals->eth.KdbgHostAddr.wMAC= 0xA3CC3938 pDriverGlobals->eth.KdbgHostAddr.wPort= 0x0 pDriverGlobals->eth.PpshHostAddr.dwIP= 0x0 pDriverGlobals->eth.PpshHostAddr.wMAC= 0xA3CC3944 pDriverGlobals->eth.PpshHostAddr.wPort= 0x0 pDriverGlobals->eth.SubnetMask= 0xC0FFFFFF pDriverGlobals->eth.DHCPLeaseTime= 0x0 pDriverGlobals->eth.EdbgFlags= 0x1 OEMether IP Addr: 172.18.132.80 OEMether IP netmask: 255.255.255.192 (D)(OEMEthInit) SysIntrVal = EDBG_SYSINTR_NOINTR (D) After OEMEthInit Device XSBase25521862, IP 172.18.132.80, Port 981 (D) Before KitlEtherInit Calling EdbgInitDHCP (D) After KitlEtherInit -OEMKitlInit Host connected Host IP: 172.18.132.91, port 1050 KeyIndex 0 = -1 KeyIndex 1 = -1 KeyIndex 2 = -1 KeyIndex 3 = -1 KeyIndex 4 = -1 KeyIndex 5 = -1 KeyIndex 6 = -1 KeyIndex 7 = -1 +KITLRegisterDfltClient, service:0 +KITLRegisterDfltClient, service:1 KITLGlobalState == 0x61 KITL Initialized Waiting for service 'DBGMSG' to connect..., fUseSysCalls = 0 ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service PPSH ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service PPSH ProcessAdminMsg: Receive Config message for service DBGMSG ARMInit done. +KITLRegisterDfltClient, service:2 ProcessAdminMsg: Receive Config message for service KDBG ProcessAdminMsg: Receive Config message for service KDBG KITL: Leaving polling mode... KITL Checking client registrations +RegisterClientPart2: Id 0x00000000 KITL Timer thread started, (hTh: 0x03CB4FDE, pTh: 0x83C80000) -RegisterClientPart2 +RegisterClientPart2: Id 0x00000001 -RegisterClientPart2 VBridge:: VB_INITIALIZED returns [1] VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes buffer [0xA2D302E0] to [0xA2D342E0]. buffer [0xA2D2C2C0] to [0xA2D302C0]. 0x83a645a8: TAPI:OldAddTapiDevice - This BSP is loading TSPs by old method!!! Change registry settings to use new way!!! OEMEthCurrentPacketFilter set to [0xB] VBridge:: Current VMini packet filter = [0xB] CS8900: Set receive packet filter [Filter=0xB, RxCTL=0xF05]. OEMEthMulticastList():: No of Entries [1] [0] : 1 - 0 - 5E - 0 - 0 - 1 OEMEthMulticastList returning [1] CS8900: Multicast[1 of 1] = 1-0-5E-0-0-1 CS8900: Logical Address Filter = 40.0.0.0. //////////////////////////////////////// 128M hung: Download successful! Jumping to image at physical 0xA00B9000... Begin ****************************************************** ****************************************************** ****************************************************** ****************************************************** ****************************************************** OEMInitDebugSerial using UART2 Windows CE Kernel for ARM Built on Mar 13 2003 at 22:43:27 ProcessorType=02d0 Revision=6 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 800b9ef8 +OEMKitlInit (D) Before OEMEthInit (D)(OEMEthInit) Checking CS8900A Devices.. CS8900A Ethernet Controller Already Initilaized: OK VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes buffer [0xA2D302E0] to [0xA2D342E0]. buffer [0xA2D2C2C0] to [0xA2D302C0]. NK add MAC: [0-B-29-FF-55-66] Dump Driver_Globals (ether stuff only) at : 0xA7CC3000 pDriverGlobals->eth.EbootMagicNum= 0x45424F54 pDriverGlobals->eth.etherEnabled= 0x0 pDriverGlobals->eth.etherFlags= 0x0 pDriverGlobals->eth.TargetAddr.dwIP= 0x508412AC pDriverGlobals->eth.TargetAddr.wMAC= 0xA7CC3910 pDriverGlobals->eth.TargetAddr.wPort= 0xD403 pDriverGlobals->eth.DownloadHostAddr.dwIP= 0x5B8412AC pDriverGlobals->eth.DownloadHostAddr.wMAC= 0xA7CC3920 pDriverGlobals->eth.DownloadHostAddr.wPort= 0x6804 pDriverGlobals->eth.DbgHostAddr.dwIP= 0x0 pDriverGlobals->eth.DbgHostAddr.wMAC= 0xA7CC392C pDriverGlobals->eth.DbgHostAddr.wPort= 0x0 pDriverGlobals->eth.KdbgHostAddr.dwIP= 0x0 pDriverGlobals->eth.KdbgHostAddr.wMAC= 0xA7CC3938 pDriverGlobals->eth.KdbgHostAddr.wPort= 0x0 pDriverGlobals->eth.PpshHostAddr.dwIP= 0x0 pDriverGlobals->eth.PpshHostAddr.wMAC= 0xA7CC3944 pDriverGlobals->eth.PpshHostAddr.wPort= 0x0 pDriverGlobals->eth.SubnetMask= 0xC0FFFFFF pDriverGlobals->eth.DHCPLeaseTime= 0x0 pDriverGlobals->eth.EdbgFlags= 0x1 OEMether IP Addr: 172.18.132.80 OEMether IP netmask: 255.255.255.192 (D)(OEMEthInit) SysIntrVal = EDBG_SYSINTR_NOINTR (D) After OEMEthInit Device XSBase25521862, IP 172.18.132.80, Port 981 (D) Before KitlEtherInit Calling EdbgInitDHCP (D) After KitlEtherInit -OEMKitlInit Host connected Host IP: 172.18.132.91, port 1124 KeyIndex 0 = -1 KeyIndex 1 = -1 KeyIndex 2 = -1 KeyIndex 3 = -1 KeyIndex 4 = -1 KeyIndex 5 = -4194305 KeyIndex 6 = -4194305 KeyIndex 7 = -1 +KITLRegisterDfltClient, service:0 +KITLRegisterDfltClient, service:1 KITLGlobalState == 0x61 KITL Initialized Waiting for service 'DBGMSG' to connect..., fUseSysCalls = 0 ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service PPSH ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service PPSH ProcessAdminMsg: Receive Config message for service DBGMSG ARMInit done. +KITLRegisterDfltClient, service:2 ProcessAdminMsg: Receive Config message for service KDBG ProcessAdminMsg: Receive Config message for service KDBG KITL: Leaving polling mode... KITL Checking client registrations +RegisterClientPart2: Id 0x00000000 KITL Timer thread started, (hTh: 0x07CB4FDE, pTh: 0x87C80000) -RegisterClientPart2 +RegisterClientPart2: Id 0x00000001 -RegisterClientPart2 looking forward to your suggestions,I was a bit confused now.. thank u very much. Tag: Use of CryptoMemory Tag: 113164
  - 5
    - How to tell which compiler in C code? Our DLL will be used both in EVC 4.0 and WINCE4.2, and we plan to add different code according to the compiler. So we need to know how to tell which compiler in C code? Is there any predefined things to indicate this? #if defined(XXXXX) /* do something here for CEPC in PB */ ......... #else /* do alternate here for iPaq in EVC4 */ ........ #endif Thanks for any suggestion! Cetrier Tag: Use of CryptoMemory Tag: 113161
  - 6
    - mdoc h3 Hi, i can boot and launch windows from mdoc h3. 4 partitions created but i can't see any of them under My Device. i did necessary registry settings. i think there is a problem with formating. does any one knows correct dformat syntax for windows ce? windows ce 5. pxa 270. Thanks Alli Tag: Use of CryptoMemory Tag: 113147
  - 7
    - TimeChange Notification Error at bootup Hi, I am using an external real time clock to store the local time. Inside RTC_Init(), I start an endless thread waiting for time events "NOTIFICATION_EVENT_TIME_CHANGE" and "NOTIFICATION_EVENT_TZ_CHANGE" to be notified about time changes (see code below). This works fine until Suspend/Resume! If the board did a Suspend/Resume, I get following errors at bootup: > Notification Error : Cannot execute \\.\Notifications\NamedEvents\DSTTimeChange > Notification Error : Cannot execute \\.\Notifications\NamedEvents\TaskbarTimeChangeEvent Afterwards, a "NOTIFICATION_EVENT_TIME_CHANGE" event occurs. When I delete my persistent registry, the errors disappear until I do another Suspend/Resume. If I disable the RTC driver, no errors are visible at all! Does anybody know why these errors happen or do I make something wrong inside my endless thread? Thanks in advance beat DWORD WINAPI synchronizerThread(LPVOID param) { HANDLE hTimeEvent[2]; CE_NOTIFICATION_TRIGGER trigger[2]; SYSTEMTIME time; DWORD rWaitObject; // Time change GetLocalTime(&trigger[0].stStartTime); trigger[0].dwSize = sizeof(CE_NOTIFICATION_TRIGGER); trigger[0].dwType = CNT_EVENT ; trigger[0].dwEvent = NOTIFICATION_EVENT_TIME_CHANGE; trigger[0].lpszApplication = L"\\\\.\\Notifications\\NamedEvents\ \TimeNotify"; trigger[0].lpszArguments = 0; trigger[0].stEndTime = trigger[0].stStartTime; // TimeZone change GetLocalTime(&trigger[1].stStartTime); trigger[1].dwSize = sizeof(CE_NOTIFICATION_TRIGGER); trigger[1].dwType = CNT_EVENT ; trigger[1].dwEvent = NOTIFICATION_EVENT_TZ_CHANGE; trigger[1].lpszApplication = L"\\\\.\\Notifications\\NamedEvents\ \TimeZoneNotify"; trigger[1].lpszArguments = 0; trigger[1].stEndTime = trigger[1].stStartTime; hTimeEvent[0] = CreateEvent(0, FALSE, FALSE, L"TimeNotify"); hTimeEvent[1] = CreateEvent(0, FALSE, FALSE, L"TimeZoneNotify"); if ( (hTimeEvent[0] == 0) || (hTimeEvent[1] == 0) ) { RETAILMSG(1, (L"External RTC - Creation of TimeEvents failed!\r \n")); } else { WaitForAPIReady(SH_WMGR, INFINITE); while (CeSetUserNotificationEx(0, &trigger[0], 0) == NULL) { Sleep(200); } while (CeSetUserNotificationEx(0, &trigger[1], 0) == NULL) { Sleep(200); } while (1) { rWaitObject = WaitForMultipleObjects(2, hTimeEvent, FALSE, INFINITE); if ( (WAIT_FAILED == rWaitObject) || (WAIT_TIMEOUT == rWaitObject) ) RETAILMSG(1, (L"External RTC Task - WaitForMultipleObjects ERROR!\r\n")); } else { EnterCriticalSection(&csRTC); GetLocalTime(&time); setExternalRtc(&time); LeaveCriticalSection(&csRTC); } } } return 0; } Tag: Use of CryptoMemory Tag: 113134
  - 8
    - System hang after wake up if long press on touch panel Hi All, I have a situation here with the touch panel. I'm using a WINCE 5.0 OS. It seems that if i long press on the touch panel (can be anywhere on the screen) and did a system suspend, on the wake up the system seems to hang. From the trace i can see all the devices have already waken up,(spi, i2c, file systm etc), but it stops after device power up. Have any one meant with the same issue? Can anyone advice? Sincerely Jimmy Tag: Use of CryptoMemory Tag: 113133
  - 9
    - how is the flash mdd behavior in R2? 1. From some senario I guess flashmdd layer reserves some blocks for private usage(maybe for compact). For example, pdd layer tells mdd there are 1030656 sectors through FMD_GetInfo(), while I can see only 1015040 sectors through control panel. where are the losted 15616 sectors? 2. Moreover, can i open some debug zone to watch the mdd layer's behavior? 3. there is an interface, GetLifeCycleInfo, in pdd to get erase time, while the sample only returns ERROR_NOT_SUPPORTED. Doesn't mean if pdd doen't give any information to mdd, mdd won't do any wearleveling? Tag: Use of CryptoMemory Tag: 113132
  - 10
    - Camera DShow Integration Test Failure on WM6.1 with NULLCAM I am working on ARMV4I device. BSP is based on FSample bsp comes with WM610. I am using latest March 2008 LTK from MSFT, also with this LTK Camera Dshow Integration Test passes on Device Emulator. I am using WM6.1 image (for our ARM device) build using following sysgen variables: 1) SYSGEN_CAMERA_NULL=1(To Include NULLCAM Driver) 2) SYSGEN_DSHOW_CAPTURE=1(Used Previously on WM5 and later versions. Even without this variable LTK doesn't pass) 3) IMGCAMERAOEM=0 (To include P&V Camera registries) 4) SYSGEN_DSHOW_WMV=1 (Got hint from Fsample, Even without this variable LTK doesn't pass) 5) SYSGEN_DSHOW_ICM=1 (Got hint from Fsample, Even without this variable LTK doesn't pass) 6) set BSP_NOCAMERA=1 (To exclude default FSample Camera Driver) So this image contains NULLCAM only. Also P&V camera application properly for all combinations with above image on our ARMV4I device. If I run "Camera Direct Show Integration test" for 100-300 test nos. Test takes 45 sec to finish, in which 23 test out of 32 fails. Same kind of results happen with whole LTK. Following is the failure message for almost all the failed tests: CCaptureFramework: Loading the video property bag data failed. Initializing the capture graph failed. CCaptureFramework: Pausing the graph failed. I have seen this kind of failure before with WM5 later AKUs, when We don't use updated WMCETK. But here this possibility ruled out, because same LTK tests are passing on device emulator. I have exhaust all my attempts, nothing more to try. Can anyone please give me some pointer, what else I can try after reaching above state. Tag: Use of CryptoMemory Tag: 113129
  - 11
    - mpeg2demux for demuxing raw transport stream Hi, Tried building below grpah : async reader (raw file TransportStream.dat) -> mpeg2 demux -> mpeg2 decoder -> video render For the above graph I am getting error VFW_E_NO_TRANSPORT (0x80040266L) , async -> mpeg2demux * async reader and mpeg2demux are Microsoft's filters without any modification. * .dat file type is added in registry which uses async reader as source filter, majortype - MEDIATYPE_Stream and subtype MEDIASUBTYPE_MPEG2_TRANSPORT Queries: 1. I did some search on this error and found http://groups.google.com/group/microsoft.public.win32.programmer.directx.video/msg/b9947140313f33e5 is this what I have to do? 2. Does mpeg2demux for wince6.0 support MEDIASUBTYPE_MPEG2_TRANSPORT streams? Regards, Dev Tag: Use of CryptoMemory Tag: 113128
  - 12
    - Debug Zones question I noticed that when running the debug version of CE6.0 (x86 or ARM BSPs) it takes a long time to start up compared to 5.0. I believe that I need to disable debug zones. I think one big culprit is KITL who appears to spit out this on the debug port in an incredible rate: Timer: Removing entry, slot: 15, expire: 4294952713 TimerEnt: slot 0, expire: 345400192 I read that I should be able to mask off zones in the HKEY_LOCAL_MACHINE/DebugZones From what I can discern from code the name should be KITL so I added "KITL"=dword:1 to try and only display errors. This does not seem to work. When I open CE Debug Zones window the other zones under kitl.dll is still enabled. And messages are still displayed. Anyone have any advice on this? Daniel Tag: Use of CryptoMemory Tag: 113123
  - 13
    - SanDisk mDOC Has anyone been able to perform DMAs (with synchronous bursts) to or from this part? Is the use of the DMARQ line required? Tag: Use of CryptoMemory Tag: 113117
  - 14
    - Reading MAC Address Hi All, I like to read and dipslay the MAC Address of the device. I search on help and it shows that typedef uchar NDIS_802_11_MAC_ADDRESS[6] contains the MAC address but when i read it always returns Zero. Any help please. Thanks Tag: Use of CryptoMemory Tag: 113115
  - 15
    - SDIO WIFI and CE 6.0 Hello, I try to find a SDIO WIFI card that works under CE 6.0 and compliant with SD 2.0. My CPU is an iMx31 and SDHC card works well with it. Regards. Tag: Use of CryptoMemory Tag: 113110
  - 16
    - suspend menu missing!! Hi all, WinCE 5.0. x86 I have a workspace file (pbxml) file provided by the customer; when i build the image and boot it, the suspend menu (start->suspend) is missing. Could anyone tell which catalog file need to be added in order to get the suspend menu??? Thanks in advance. Tag: Use of CryptoMemory Tag: 113098
  - 17
    - USBAttachDevice : LPCUSB_INTERFACE UsbInterface = NULL Hi, I am building an USB-CDC driver. I started from scratch with just the basic stream interface. At this point, I plug in my device, it is recognized from the regsettings I made, my DLL is loaded, and USBDeviceAttach is called. From this point, I am using the PRN driver as an example. I copied ParseUsbDescriptors() but this fails. (do I need it anyway ?, the device is already the right one, else my driver wouldn't have been loaded... (???), or is it also loaded under differrent circumstances ? ) It fails because the UsbInterface pointer passed to USBAttachDevice is NULL. Why is that ? BOOL USBDeviceAttach( USB_HANDLE hDevice,LPCUSB_FUNCS UsbFuncs, LPCUSB_INTERFACE UsbInterface,LPCWSTR UniqueDriverId, LPBOOL AcceptControl, LPCUSB_DRIVER_SETTINGS UsbDriverSettings, DWORD Unused) Greetings, Rob. Tag: Use of CryptoMemory Tag: 113093
  - 18
    - Run a app in a init, performance decrease a lot Hi, I would like to run a custom application when kernel is loading. to do that I have added in my registry these settings: [HKEY_LOCAL_MACHINE\init] "Launch89"="Mem.exe" "Depend89"=hex:1e,00 The app Mem.app, is an application that listen a sockect connection a read some data in our system, but the problem comes when app is running and accept an incomming connection, the performance of the app is quite low compared if I run the app manually from a telnet session. Could be this about the WinCe priorities for the init processes? How can modify this? Thanks, Bye Tag: Use of CryptoMemory Tag: 113090
  - 19
    - spi ethernet initialization Hello, I am working on microchip SPI ethernet controller. to get the debug ethernet work on my hardware. I have done the initialization successfully, and when i read my MAC registers, there are some random values every time. I hope there is some delay problems in chipselect timings. Please let me know, what will be the exact problem. why my MAC registers configuration is not stable. Thanks in advance, Kumar Tag: Use of CryptoMemory Tag: 113088
  - 20
    - Simulate CF card removal Hi All, My application installs a driver for the CF card from CAB. Now, I'd like to load the installed driver so that user won't have to remove the card or reset the device. Merely I need to simulate removal and insertion of the CF card programmatic ally. What function should I use for that? Tag: Use of CryptoMemory Tag: 113080
  - 21
    - Touch screen jitters by one pixel Hi, If I hold the stylus on the touch screen, I can see a jitter of only one pixel. My touch screen driver does already filtering. I saw once registry keys, which enable filtering of jitter of a certain amount of pixels, but I can't find them anymore. How can I suppress a jitter of a certain amount of pixels using registry keys under CE6? Thanks, Peter Tag: Use of CryptoMemory Tag: 113077
  - 22
    - SYSGEN RDP Error after Windows CE 6.0 R2 installed, Help please! I have installed the CE6 R2, CE6 2007 Rollup and the April 2008 update. When I do "Build and sysgen" or "Rebuild and clean sysgen", I got the error: -- TARGETNAME: cetsc TARGETTYPE: PROGRAM RELEASETYPE: OAK TARGETLIBS: D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\lib\x86\retail \cetsc_ALL.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\target\x86\retail \0409\cetsc.res D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\lib\x86\retail\atls.lib D: \Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\lib \x86\retail\atlosapis.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail\ole32.lib D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib \x86\retail\oleaut32.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail\uuid.lib D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib \x86\retail\commctrl.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail \iphlpapi.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail \ceshell.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail \ceosutil.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail\coredll.lib D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk \lib\x86\retail\crypt32.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail \secur32.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail \credui.lib D:\WINCE600\public\common\oak\lib\x86\retail \credsspcfg.lib D:\WINCE600\public\rdp\oak\lib\x86\retail \cryptlib.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail \ws2.lib D:\WINCE600\public\common\oak\lib\x86\retail \rsa32.lib D:\WINCE600\public\rdp\oak\lib\x86\retail\rdrstubs.lib D: \WINCE600\public\common\oak\lib\x86\retail\corelib0.lib D:\Work\WinTerm \OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\lib\x86\retail \corelib1.lib SOURCELIBS: D:\WINCE600\public\rdp\oak\lib\x86\retail\cetscbase.lib D: \WINCE600\public\rdp\oak\lib\x86\retail\cecommon2.lib EXEENTRY: WinMainCRTStartup DLLENTRY: _DllMainCRTStartup makefile.def: Including D:\WINCE600\public\common\oak\misc \Sources.default makefile.def: BUILDROOT is D:\WINCE600\public\rdp\cesysgen makefile.def: Including D:\WINCE600\PUBLIC\RDP\CESYSGEN\sources makefile.def: Including D:\WINCE600\public\common\oak\misc\Sources.CE Directory: D:\WINCE600\PUBLIC\RDP\CESYSGEN TARGETNAME: cetsc makefile.def: Including D:\WINCE600\public\common\oak\misc \sources.ReleaseType_OAK set LIB=D:\WINCE600\sdk\CE\lib BUILD_MARKER:LINK_EXE_START Linking D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\target\x86\retail \cetsc.exe link /LARGEADDRESSAWARE -out:D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\target\x86\retail \cetsc.exe -machine:x86 @C:\DOCUME~1\Hou\LOCALS~1\Temp\nm1ED4.tmp Microsoft (R) Incremental Linker Version 8.00.50727.42 Copyright (C) Microsoft Corporation. All rights reserved. -nodefaultlib -entry:WinMainCRTStartup -pdb:D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen \oak\target\x86\retail\cetsc.pdb -pdbaltpath:cetsc.pdb /opt:ref -debug -debugtype:cv -incremental:no /safeseh -map:D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen \oak\target\x86\retail\cetsc.map -savebaserelocations:D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\target\x86\retail \cetsc.rel -MERGE:.rdata=.text -ignore: 4001,4070,4078,4086,4089,4096,4099,4108,4229 /STACK:65536,4096 - debugtype:cv,fixup -incremental:no /subsystem:windowsce,6.00 -base:0x00010000 D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\lib \x86\retail\cetsc_ALL.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\target\x86\retail \0409\cetsc.res D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\lib\x86\retail\atls.lib D: \Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\lib \x86\retail\atlosapis.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail\ole32.lib D: \Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib \x86\retail\oleaut32.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail\uuid.lib D: \Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib \x86\retail\commctrl.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail \iphlpapi.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail\ceshell.lib D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib \x86\retail\ceosutil.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail\coredll.lib D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib \x86\retail\crypt32.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail\secur32.lib D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib \x86\retail\credui.lib D:\WINCE600\public\common\oak\lib\x86\retail \credsspcfg.lib D:\WINCE600\public\rdp\oak\lib\x86\retail\cryptlib.lib D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib \x86\retail\ws2.lib D:\WINCE600\public\common\oak\lib\x86\retail \rsa32.lib D:\WINCE600\public\rdp\oak\lib\x86\retail\rdrstubs.lib D: \WINCE600\public\common\oak\lib\x86\retail\corelib0.lib D:\Work\WinTerm \OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\lib\x86\retail \corelib1.lib D:\WINCE600\public\common\oak\lib\x86\retail \corelib0.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\lib\x86\retail \corelib1.lib D:\WINCE600\public\rdp\oak\lib\x86\retail\cetscbase.lib D: \WINCE600\public\rdp\oak\lib\x86\retail\cecommon2.lib cetscbase.lib(mainwnd.obj) : error LNK2019: unresolved external symbol _CreateTscCore referenced in function "protected: struct HWND__ * __thiscall CMainWnd::CreateCore(void)" (? CreateCore@CMainWnd@@IAEPAUHWND__@@XZ) cetscbase.lib(mainwnd.obj) : error LNK2019: unresolved external symbol _DeleteTscCore referenced in function "public: int __thiscall CMainWnd::OnClose(void)" (?OnClose@CMainWnd@@QAEHXZ) cetscbase.lib(mainwnd.obj) : error LNK2019: unresolved external symbol _CloseTscUI referenced in function "public: int __thiscall CMainWnd::OnClose(void)" (?OnClose@CMainWnd@@QAEHXZ) cetscbase.lib(mainwnd.obj) : error LNK2019: unresolved external symbol _StartTscUI referenced in function _WinMain rdrstubs.lib(smartptr.obj) : error LNK2019: unresolved external symbol "void * __cdecl TSAlloc(unsigned long)" (?TSAlloc@@YAPAXK@Z) referenced in function "void * __cdecl operator new(unsigned int)" (?? 2@YAPAXI@Z) rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol "void * __cdecl TSAlloc(unsigned long)" (?TSAlloc@@YAPAXK@Z) rdrstubs.lib(smartptr.obj) : error LNK2019: unresolved external symbol "void __cdecl TSFree(void *)" (?TSFree@@YAXPAX@Z) referenced in function "void __cdecl operator delete(void *)" (??3@YAXPAX@Z) rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol "void __cdecl TSFree(void *)" (?TSFree@@YAXPAX@Z) rdrstubs.lib(rdrclip.obj) : error LNK2019: unresolved external symbol "public: virtual __thiscall CTSObject::~CTSObject(void)" (?? 1CTSObject@@UAE@XZ) referenced in function "public: virtual __thiscall CTSUnknown::~CTSUnknown(void)" (??1CTSUnknown@@UAE@XZ) rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol "public: virtual long __cdecl CTSUnknown::NonDelegatingQueryInterface(struct _GUID const &,void * *)" (?NonDelegatingQueryInterface@CTSUnknown@@UAAJABU_GUID@@PAPAX@Z) rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol "public: virtual unsigned long __cdecl CTSUnknown::NonDelegatingAddRef(void)" (? NonDelegatingAddRef@CTSUnknown@@UAAKXZ) rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol "public: virtual unsigned long __cdecl CTSUnknown::NonDelegatingRelease(void)" (? NonDelegatingRelease@CTSUnknown@@UAAKXZ) rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol "public: virtual long __thiscall CTSObject::Initialize(void)" (? Initialize@CTSObject@@UAEJXZ) rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol "public: virtual long __thiscall CTSObject::Terminate(void)" (? Terminate@CTSObject@@UAEJXZ) rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol _IID_ITSClipPlugin rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol _IID_ITSVirtualChannelPlugin rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol _IID_ITSClientPlugin rdrstubs.lib(rdrclip.obj) : error LNK2019: unresolved external symbol "public: __thiscall CTSUnknown::CTSUnknown(char const *,struct IUnknown *)" (??0CTSUnknown@@QAE@PBDPAUIUnknown@@@Z) referenced in function "public: __thiscall CClipPlugin::CClipPlugin(struct IUnknown *)" (??0CClipPlugin@@QAE@PAUIUnknown@@@Z) D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak \target\x86\retail\cetsc.exe : fatal error LNK1120: 16 unresolved externals NMAKE : fatal error U1077: 'link' : return code '0x460' Stop. NMAKE : fatal error U1077: 'D:\WINCE600\sdk\bin\i386\nmake.exe' : return code '0x2' Stop. NMAKE : fatal error U1077: 'D:\WINCE600\sdk\bin\i386\nmake.exe' : return code '0x2' Stop. -- Tag: Use of CryptoMemory Tag: 113076
  - 23
    - About kdbg and the interrupt Hi I have a question about the interrupt handling in the kdbg. I saw in kdstub that the debugger disables the interrupts just before sending or receiving a debug packet (function KdSend and KdRecv). Actually I'm using the kitl over serial with a interrupt based driver. To use the debugger, I have to make a call to INTERRUPTS_ON in each call to kitlSend because the debugger disabled the interrupts just before. If I remove this call to INTERRUPTS_ON and use a poll based driver, the system cannot boot really far (stop after shell.exe load) because the scheduling is disabled (the interrupts are masked so the tick interrupt cannot be handled) . Another problem caused by the reenabling of the interrupts inside the KITL driver is that I'm not able to place breakpoint inside ISR. In fact, the interrupts seems to be reenabled during the ISR causing data aborts and the crash of the system (I think the context is corrupted by the reenabling of the interrupt and leads to this behaviour). So my question is, Can I debug the ISR with the Kdbg knowing that it disables the interrupts ? The other question is, how the kitl interrupt based system can work if the debugger disables the interrupts ? Tag: Use of CryptoMemory Tag: 113074
  - 24
    - Activesync file filter Hi All I am working with smdk2440. My device connect to PC and I can explore all folders from PC. Now I want to hide some folders on device from PC explorer (means they should not be visible in PC). What should I do for this purpose? Is a filesystem filter required or change to activesync code? Regards -- Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200806/1 Tag: Use of CryptoMemory Tag: 113072
  - 25
    - How to get IrSIR work? Hi: how to get IrSIR work im our BSP and test it? we have IrCOMM.dll IrSIR.dll and set SYSGEN_IRDA=1 is it enough for IrSIR work? or need something? and how to test it? if anybody can tell us. i m very appreciated. and best Regards. vincent tsai Tag: Use of CryptoMemory Tag: 113068
- Next
  - 1
    - Including asp.dll in build Does anyone know of why asp.dll would not be included in the build when sysgen_asp = 1 is defined. I have been tring for some time to sysgen a os that will support asp. Html files serve up quite nicely, however, .asp files generate 501/505 errors. Upon investigation I realized asp.dll is not included in the release directory. Obviously I'm missing some flag/setting/component, but of couse I don't know which? Thanks Tag: Use of CryptoMemory Tag: 113064
  - 2
    - BSP Template sample code now available Hey all, I just wanted to let you know that some new sample code is available for CE BSPs. It's a template that illustrates stubs of all required and optional OAL and KITL functions. It also tries to explain things incrementally so that newcomers can understand. You can download it from the CE Base OS blog, here: http://blogs.msdn.com/ce_base/archive/2008/05/30/bsp-template-now-available-for-ce-6-0-ce6r2.aspx I hope that you will find it useful. -- --Travis Hobrla This posting is provided "AS IS" with no warranties, and confers no rights. Tag: Use of CryptoMemory Tag: 113056
  - 3
    - Warm boot / fails to re-initialize system Hi I have an Aaeon PCM8152 / Celeron M running standard CEPC winCe5.0. When I warm reset the system, or switch is off/on within a few seconds, I get this error. The bootloader runs fine, but afterwards the first part of kernelinit fails =96 the system never recovers. Leaving the system for 30 sec. it alwayes powers correct up. *************************************************** INFO: code=3D0x4. INFO: code=3D0x4. Jumping to image (address=3D0x224588) Debug Serial Init SysInit: Mapping Extra RAM from 0x84000000 to 0x9ac00000 GDTBase=3D8235b0e8 IDTBase=3D8237c860 KData=3D82385800 Windows CE Kernel for i486 Built on Feb 8 2007 at 23:34:04 g_pPageDir =3D 82388000 Double Fault -- backlink=3D0048 TSS=3D8237d060 EIP=3D80233ef1 Flags=3D00210082 Eax=3D00000000 Ebx=3D8237bd04 Ecx=3Df000e987 Edx=3D8237bdd0 Esi=3D9db79000 Edi=3D8df78000 Ebp=3D8237bcf8 Esp=3D8237bc94 CS=3D0019 DS=3D0040 ES=3D0040 SS=3D0021 FS=3D0018 GS=3D0018 *************************************************** As I can understand this problem is not isolated to my target. The most interesting solution I have managed to find is implementing a call to NKForceCleanReboot in OEMInit(). Questions: NKForceCleanReboot is not declared in any of my header files. Am I suppose to implement it myself? Using the CEPC standard BSP I=B4m not sure which file my OEMInit() is located? Perhaps someone have done a similar fix up of OEMInit() and can show how? Any other suggestions or comments? Best regards, Jonas Tag: Use of CryptoMemory Tag: 113043
  - 4
    - add compact framework to nk.bin Hello, I have a nk.bin runtime winCE6.0 image and I would like to add the 3.5 Compact Framework. I do not have the whole Platform Builder project, I can't re-build it with the CF35. Is-it possible ? arnaud. Tag: Use of CryptoMemory Tag: 113038
  - 5
    - Adding mmtimer to Coredll.dll Hi all, I'm trying to add Multimedia Timer Support to my OS Image. Therefore I need to include mmtimer.lib into the Image and linkt it to Coredll.dll. I am currently stuck on how to link a component to Coredll.dll. I tried using the same mechanisms as detailed in Kurt Kennetts article on how to "Replace a COREDLL component in WCE 6" but without success. Please point me in the right dircetion. TIA, Bjoern Tag: Use of CryptoMemory Tag: 113026
  - 6
    - Serial communication problem.. Hi I'm trying to implement basic serial communication. I'm using the CreateFile method. I created a WCE Console Application. On building the project i get this linker error. I don't know how to resolve it. I don't know why but i'm unable to change the project settings, in the sense, the Project Settings options is disabled. Do i need to add/ change any libraries or dlls? i think that fn. is under kernel32.lib and kernel32.dll. Pls help me out. The following is my program and error msgs. Also pls check if what i'm passing as arguements are valid. I want to be able to use COM1 and i'm not sure how to set it. #include "stdafx.h" HANDLE hFile; #define BUF_SIZE 80 int _tmain(int argc, TCHAR *argv[], TCHAR *envp[]) { //_tprintf(_T("Hello World!\n")); OutputDebugString(L"Running"); HANDLE m_hComm = CreateFile(L"//./COM1",GENERIC_READ | GENERIC_WRITE,0,0,OPEN_EXISTING,0,0); return 0; } error LNK2019: unresolved external symbol CreateFileW referenced in function wmain BUILD: [01:0000000036:ERRORE] obj\ARMV4I\retail\cook.exe : fatal error LNK1120: 1 unresolved externals Tag: Use of CryptoMemory Tag: 113019
  - 7
    - DDEX1 (DirectDraw App) failing in DirectDrawCreate Hi, While running the DDEX1.exe (DirectDraw sample application) on WinCE 6.0 on CEPC the DirectDrawCreate() fails with the return code E_OutOfMemory (0x800700E) and following error comes in PB's debug window. Error: 4294847715 PID:32e0002 TID:32f0002 GWES Hook fails device creation. DirectDrawCreate fails. 4294847731 PID:32e0002 TID:32f0002 DDEX1: DirectDrawCreate FAILED 4294847798 PID:400002 TID:32f0002 DeleteFromProcessInputLocaleTable: Deleted process from ProcessInputLocale table, hProcess: 0x032E0002 4294847798 PID:32e0002 TID:32f0002 OSAXST1: <<< Unloading Module 'ddraw.dll' (0x8845D8A8) at address 0x404B0000-0x404C6000 in Process 'ddex1.exe' (0x8841E000) The function call sequence i am seeing here is DDEX1.EXE --> GetDriverInfo --> CanCreateSurface --> CreateSurface --> HALLock --> HALUnlock --> HALDestroySurfcace I dont know whether the above sequence of calls correct or this is happening because of some error. Can anyone tell me is this sequence correct or something going wrong? What may be the possible reasons of above errors? or How can I debug this as there is no middleware code available? Thnaking you in Advance and hoping for reply. Vikas Patil Tag: Use of CryptoMemory Tag: 113018
  - 8
    - Mass storage issue on Windows CE 5.0 Hi, I am trying to get peripheral mass storage working on my Windows CE 5.0 device .I have 3 partition in my NAND flash with Bootpart library. (1st BINFS for Nk,bin , 2nd FAT for Hive Registry, 3rd again FAT rest of the space ).I am able to get the 2nd and 3rd partition as separate drive in Host PC.One of the problem i am facing is if i plug the USB initially and try to boot the device it will hang . This i feel is because when it tries to enumerate as mass storage it will unload the filesystem dll from the device( both partition is having the same filesystem) . Since hive is on one drive it is causing the problem .I tried without hive and it works fine .Could anyone suggest a way of getting hive and mass storage working together. Regards Wins Tag: Use of CryptoMemory Tag: 113014
  - 9
    - How to popup the soft keyboard automatically? My device has no graphical shell , but I have added the SIP component into the OS, and I can show the SIP through the SipShowIM API. But I want the SIP to popup automatically , when any edit control get input focus. So what should I do ? Thanks! Tag: Use of CryptoMemory Tag: 113013
  - 10
    - sdram issues hi,everyone I am upgrading my sdram configuration for 128M, Frist of all,I show my platform, CPU : Xscale pxa255 OS : Windows CE .Net 4.2 Flash : 32MB SDRAM : 128MB (32MBX4) since I have heard that it only spend 2 hours on this issue, why it cost me more than one week to solve the problem... Okay,let's see the process. I modified some files related, config.bib,memdefs.h,memmap.inc,xsc1.h,xsc1.inc,xsc1bd.h,xsc1bd.inc, fwxsc1.s,platform.reg.(if i missed some file,pls tell me) At first,i always modified all of files related, then the kernel hung...I can not find where is the problem, so,I modified some files step by step, I just changed OEMAddressTable in memmap.inc, DCD 0x80000000, 0xA0000000, 64 to DCD 0x80000000, 0xA0000000, 128 and I also modified xsc1bd.inc, MDCNFG_VAL EQU 0x19C119C1; SDRAM Config Reg (CL=2) to MDCNFG_VAL EQU 0x19C319C3; SDRAM Config Reg (CL=2) then,sdram register MDCNFG enable the bank1 which is also 64MB. After two changes above,I download the kernel,it still works. Then,I just modified config.bib MEMORY IF IMGFLASH ! NK 800B8000 02000000 RAMIMAGE ; SDRAM 32MB: [800B 8000 -> 820B 7FFF] RAM 820B8000 01C00000 RAM ; SDRAM 28MB: [820B 8000 -> 83CB 7FFF] EDBG 83F8D000 00020000 RESERVED ; x20000 for EBOOT - 3 Client memory pools of 24K (128K) ENDIF AUD_DMA 83CB8000 0000A000 RESERVED SLEEP_SAV 83CC2000 00001000 RESERVED DRV_GLB 83CC3000 00001000 RESERVED CACHE_FLG 83CC4000 0003C000 RESERVED ; for use by cache routines: 83CC_4000->83CC_4003 used for flagging. 83CC_4004->83CC_4803 rsvd for miniD DISPLAY 83D00000 00130000 RESERVED ; 1MB aligned BLOCK_BUF 83E30000 00080000 RESERVED UNUSED_BUF 83EB0000 000DD000 RESERVED whql_sig 00000001 00002000 EXTENSION ; WHQL signature extension (6KB). ZBANK 86000000 00100000 RESERVED to IF IMGFLASH ! NK 800B8000 02000000 RAMIMAGE ; SDRAM 32MB RAM 820B8000 05C00000 RAM ; SDRAM 28MB+64MB EDBG 87F8D000 00020000 RESERVED ; x20000 for EBOOT - 3 Client memory pools of 24K (128K) ENDIF AUD_DMA 87CB8000 0000A000 RESERVED SLEEP_SAV 87CC2000 00001000 RESERVED DRV_GLB 87CC3000 00001000 RESERVED CACHE_FLG 87CC4000 0003C000 RESERVED ; for use by cache routines: 83CC_4000->83CC_4003 used for flagging. 83CC_4004->83CC_4803 rsvd for miniD DISPLAY 87D00000 00130000 RESERVED ; 1MB aligned BLOCK_BUF 87E30000 00080000 RESERVED UNUSED_BUF 87EB0000 000DD000 RESERVED whql_sig 00000001 00002000 EXTENSION ; WHQL signature extension (6KB). ZBANK 8A000000 00100000 RESERVED and also changed the other related addresses in memdefs.h,xsc1.h,xsc1.inc,xsc1bd.h,xsc1bd.inc. for instance: i modified #define MEM_BASE_PHYSICAL 0xA3CB8000 #define MEM_BASE_C_VIRTUAL 0x83CB8000 #define EDBG_PHYSICAL_MEMORY_START 0x83F8D000 // Ethernet Debugger Pool Address to #define MEM_BASE_PHYSICAL 0xA7CB8000 #define MEM_BASE_C_VIRTUAL 0x87CB8000 #define EDBG_PHYSICAL_MEMORY_START 0x87F8D000 // Ethernet Debugger Pool Address It seems that all the PHYSICAL address should not be modified, I try it before,but also do not work out.. so at last,I made the above change. And during these days,I also tried to debug images, but it just hung as the release image.. anyone pls help me,I was a bit confused now.. thank u for suggestion. Tag: Use of CryptoMemory Tag: 113012
  - 11
    - Debug image - KITL - hang PB5.0 I built a debug image just by choosing the debug version from the drop down menu. It is working fine for few minutes, after that it just comes and stops at the KITL statement(debug statements below). I have not enabled "Enable KITL" in build options. I'm not sure why it stops at kitl always ? I have enabled only the following check boxes in platform->settings- >build options Enable CE target control Enable eboot space in Memory Enable full Kernel mode Could you guys help me on why my debug image stops at the KITL statement ? thnks, rishi ***************************************************************** KdTrap: JIT debugging requested, waiting for OEM selection KdTrap: JIT debugging accepted +KITLRegisterDfltClient, service:2 LAN91Cxxx: Chip Id 9 Revision 2 KITL: *** Device Name MAINSTN7757 *** built on [May 14 2008] time [18:56:42] VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes Tx buffer [0xA295EE60] to [0xA2962E60]. Rx buffer [0xA2962E80] to [0xA2966E80]. VBridge:: NK add MAC: [0-0-70-26-1E-4D] !KITLRegisterDfltClient: Fail to initialize KITL +KITLRegisterDfltClient, service:2 LAN91Cxxx: Chip Id 9 Revision 2 KITL: *** Device Name MAINSTN7757 *** Tag: Use of CryptoMemory Tag: 113011
  - 12
    - Import fmd driver to platform builder Hi, In fact, there is a nandflash driver and there are BuildExe and FMD directories in this in my sbc's(s3c2440)cd.But it doesn't seem under bsp in platform builder.I checked .cec file of bsp.Its settings seem correct.But when i want to link this to the platform builder project file(I don't know whether or not it is necessary),i can't.Because the platform builder file's extension is pbxml, not pbpxml which cec editor requires. So what is my problem? Thanks in advance. Tag: Use of CryptoMemory Tag: 113005
  - 13
    - Unknown or old version of bootloader Dear All, When I load my Image By loadcepc there is a message which shows that my Image doesn't contain any Valid bootloader. So after load completes my system hangs. Here is the detail of my project. I use Win Ce 6.0 . Hardware: Vortex SX-6154(ICOP company) 1-Board Support Package: ICOP_Vortex86_60B: x86 2-Design Template: Industrial Device 3-Design Template Variants: Internet Appliance 4-All next Steps: Default options are selected 5-I Disabled All build options. I just enabled â??Enable Ship Buildâ?? AND â??Run-time image can be larger than 32Mâ?? 6-I added IMGRAM128 = 1 Variable into Environment variable list(I tried without this variable too) I compiled My project in release mode. I made a DOM dos bootable. I copied NK.BIN into DOM. I booted my system and I chose first option(Loadcepc /v NK.Bin). The following Message apeares during load process: Enter a choice: 1 Warning A20 line already enabled 1 PCI bus (Version 3.00) using Configuration Mechanism # 1 Total free extended memory = 65471, largest block = 65471 Block allocated at 0x110000 Loading nk.bin, size = 17908451 nk.bin: Unknown or old version of bootloader Image physical start = 0x00520000, size = 18238216 Section physical start = 0x00520000, size = 16 Section physical start = 0x00520040, size = 8 Section physical start = 0x00520048, size = 4 Section physical start = 0x00521000, size = 28672 Section physical start = 0x00529000, size = 167936 Section physical start = 0x00552000, size = 391228 Section physical start = 0x005B183C, size = 27620 Section physical start = 0x005B9000, size = 1148 Section physical start = 0x005BA000, size = 385592 Section physical start = 0x00619000, size = 25632 Section physical start = 0x00620000, size = 176292 Section physical start = 0x0064C000, size = 8140 Section physical start = 0x0064E000, size = 584244 â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦â?¦. After All other sections are loaded, the following message appears and system hangs: Jumping to 0x005224F0 When I do the same with demo Image the Image physical start is 0x00200000 and system starts and the message which shows that there is no bootloader doesn't appear. Would you please tell me what the problem is???????? Thank you in advance M.Samoody Tag: Use of CryptoMemory Tag: 113003
  - 14
    - FAL source code available? i can't find it in both public and private folder. i want to debug my FMD deeply. thanks Tag: Use of CryptoMemory Tag: 113001
  - 15
    - How to replace a dll... Hello, all. (currently developing a WM6 phone) I know that I can replace a dll file using ActiveSync and debug some faults. Now, I am looking for a debug point, but I can't simply replace a dll using ActiveSync. I can see the message "the file is copied" but cant see any message that I have put in. I think that there are some files that we can't change in the simple way. If any guys know about it, help me. I wanna go home! -- Engineer (Developing Windows Mobile PDAs) Message posted via http://www.pocketpcjunkies.com Tag: Use of CryptoMemory Tag: 113000
  - 16
    - Clean format of monolithic filesystem Hi, I have a running OS image that uses Intel PSM 4.0 to make some flash into a 'disk' on CE5. This is set up such that the Storage Manager AutoLoad registry section is used to load the driver. Everything works fine. However, I'd like to have a relatively simple way to return a given device to 'factory default' configuration, including deleting any shadowed files that are stored on the PSM volume, preferably without adjusting the registry, etc. and forcing a new test cycle for the OS build. Unfortunately, items loaded from the AutoLoad segment of the Storage Manager registry are not accessible as "volumes" and, as far as I can tell, can't be accessed as though they are real filesystems. I'd like to simply pass a IOCTL_DISK_FORMAT_MEDIA to the driver and be done with it (it's designed to handle that IOCTL), but I can't get a handle which I can use with DeviceIoControl() to do this. The situation is similar to trying to operate, as a whole, on the Release folder filesystem driver, which seems to suffer from this same problem. Thanks for any pointers to ways to do this. Paul T. Tag: Use of CryptoMemory Tag: 112997
  - 17
    - CPCEnablePcmcia, SetEvent and WM_QUIT Hello all, In the deconstructor of the PCMCIA model device driver class, CPCEnablePcmcia, the event handler thread created by this class is closed with both SetEvent(m_EventList[TERMINAGE_THREAD]) and PostThreadMessage(...WM_QUIT...) function calls. Does anybody know why both methods of closing the thread were included in this public class? I've modified the code to just use SetEvent (I removed the line =93PostThreadMessage( GetThreadId(), WM_QUIT, 0, 0 );=94) and this modification still allows the thread to close cleanly and everything proceeds as expected. This closes the thread because the thread is waiting on the TERMINAGE_THREAD event in its WaitForMultipleObjects call. The reason I'm asking is that there's a stage in our device's boot process where an error occurs when CPCEnablePcmcia calls PostThreadMessage(...WM_QUIT...). I was wondering if removing this line would be a possible solution to avoiding this error. I=92m not sure what purpose this line of code serves. Thanks in advance, Jared Tag: Use of CryptoMemory Tag: 112996
  - 18
    - Environment variable building platform I have several projects that use the same platform. I would like to slightly change the code in the platform (with #ifdefs) depending on the PBWorkspace that I currently have open. I tried using Platform Settings, Environment, and setting a variable there which I hoped to #ifdef during compilation of the platform. But it doesn't seem to pick these up in C or CPP files. What's the suggested method to tackle this problem? Thanks Tag: Use of CryptoMemory Tag: 112994
  - 19
    - PhoneSendDTMFStart in WM5 I need to send DTMF tones over exisitng call. In WM6 you have the PhoneSendDTMFStart and Stop functions, are these not in WM5. I am not using TAPI is there some other high level way of doing it in Wm5. Please help Thanks Tag: Use of CryptoMemory Tag: 112988
  - 20
    - Breakpoint instantiation Hi All, I'm trying to debug a simple Hello World application on a phytec iMX31 board. But when I set breakpoints on myhello.cpp file, the breakpoints look like a red hollow circle with a yellow caution triangle. When I download the module to the board, the breakpoints are never active/instantiated. The application runs and it resides in the modules section of the ce.bib file. Where can be my fault that I can't set breakpoints correctly? I read many things about source path mapping, etc. but none solved my problem. Thanks in advance, Selin Tag: Use of CryptoMemory Tag: 112983
  - 21
    - How to Export BSP in Wince 6.0? Hi all, I have build one BSP and i want to export it (i.e.create .msi file). In Wince5.0 it is easy there is option Export BSP but in Wince6.0 (Visual Studio 2005) not that type of option. Is any body know how to Export BSP in Wince6.0? Thanks in advance Swapnil Tag: Use of CryptoMemory Tag: 112981
  - 22
    - mounting of the hive registry on sd card Hi All, I was working on mounting of the hive registry on sd card from one day still i am not succeded. Can anybody help me. for this purpose i have changed the platform.reg please find the changes i did. ; HIVE BOOT SECTION IF BSP_NOSDHCGUM ! [HKEY_LOCAL_MACHINE\init\BootVars] "SystemHive"="\\PSM\\system.hv" "StartDevMgr"=dword:1 "Flags"=dword:0 "DefaultUser"="WinCE User" "RegistryFlags"=dword:2 ; disable aggressive flushing [HKEY_LOCAL_MACHINE\System\StorageManager] "Flags"=dword:1000 [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDHC_GUM] "Dll"="sdhc_gum.dll" "Prefix"="SDH" "Order"=dword:21 "DMAChannel"=dword:14 ;comment this out to disable DMA support "DMAIsrDll"="giisr.dll" "DMAIsrHandler"="ISRHandler" "DMAIRQ"=dword:19 ;"DMASysIntr"=dword: "DMAISTPriority"=dword:63 "DMABufferSize"=dword:10000 "ControllerIRQ"=dword:17 "ControllerISTPriority"=dword:64 "ClockAlwaysOn"=dword:0 "ClockOnIfInterruptsEnabled"=dword:1 "MaximumClockFrequency"=dword:989680 ;1312D00 "Flags"=dword:1000 ; Added for loading in Boot phase, not twice "BootPhase"=dword:1 ; block-driver based file system, must boot in phase 1 [HKEY_LOCAL_MACHINE\Drivers\Builtin\SDBusDriver] "Order"=dword:15 "Dll"="SDBus.dll" "Prefix"="SDC" "ThreadPriority"=dword:64 ; default thread priority for dispatch thread "RequestListDepth"=dword:30 ; pre-allocated requests "Flags"=dword:1000 ; DEVFLAGS_TRUSTEDCALLERONLY "IClass"=multi_sz:"{20FA98A8-B298-4b32-8D72-C716AEE2FA84}=%b","{6F40791D-300E-44E4-BC38-E0E63CA8375C}=%b" "Flags"=dword:1000 ; Added for loading in Boot phase, not twice "BootPhase"=dword:1 ; block-driver based file system, must boot in phase 1 [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\SDMemory] "Name"="SD Memory Card" "Folder"="Storage Card" ;"PartitionDriver"="" ; removable storage cannot have partitions "MountAsRoot"=dword:0 ; "MountAsBootable"=dword:1 ; bootable, may contain hive [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MMC] "Name"="MMC Card" "Folder"="Storage Card" ;"PartitionDriver"="" ; removable storage cannot have partitions ; SD Memory Storage class driver [HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class] "Dll"="SDMemory.dll" "Prefix"="DSK" "BlockTransferSize"=dword:40 ; send no more than 64 blocks of data per bus transfer "SingleBlockWrites"=dword:1 ; alternatively force the driver to use single block access ;"IdleTimeout"=dword:7D0 ; 2000 milliseconds ;"IdlePowerState"=dword:2 ; 0 == D0, 1 == D1, etc. ;"DisablePowerManagement"="" ; if value present, then disable (remove value to enable) "Profile"="SDMemory" "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}", "{A32942B7-920C-486b-B0E6-92A702A99B35}" "Flags"=dword:1000 ; Added for loading in Boot phase, not twice "BootPhase"=dword:1 ; block-driver based file system, must boot in phase 1 ; MMC Storage Class Driver [HKEY_LOCAL_MACHINE\Drivers\SDCARD\ClientDrivers\Class\MMC_Class] "Dll"="SDMemory.dll" "Prefix"="DSK" "BlockTransferSize"=dword:40 ; send no more than 64 blocks of data per bus transfer ;"SingleBlockWrites"=dword:1 ; alternatively force the driver to use single block access ;"IdleTimeout"=dword:7D0 ; milliseconds ;"IdlePowerState"=dword:2 ; 0 == D0, 1 == D1, etc. ;"DisablePowerManagement"="" ; if value present, then disable (remove value to enable) "Profile"="MMC" "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}", "{A32942B7-920C-486b-B0E6-92A702A99B35}" ENDIF BSP_NOSDHCGUM ! ; END HIVE BOOT SECTION I am using GumstixIII bsp on Wince6.0. With this changes i can able to load sdbus.dll and host driver (sdhc_gum.dll) successfully. but while loading the sdmemory.dll (Client) i am getting these Debug messages. OSAXST1: >>> Loading Module 'sdmemory.dll' (0x83EE6E04) at address 0xC0CC0000-0x C0CD9000 in Process 'NK.EXE' (0x82016AA0) DEVICE!RegReadActivationValues RegQueryValueEx(\Drivers\SDCARD\ClientDrivers\Cla ss\SDMemory_Class\BusPrefix) returned 2 DeviceFolder::LoadDevice(\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class) las t 9 TicksOSAXST1: <<< Unloading Module 'sdmemory.dll' (0x83EE6E04) at address 0x C0CC0000-0xC0CD9000 in Process 'NK.EXE' (0x82016AA0) SDBusDriver: Failed to load driver with path: \Drivers\SDCARD\ClientDrivers\Clas s\SDMemory_Class Tag: Use of CryptoMemory Tag: 112948
  - 23
    - Porting WINCE on arm9 processor Dear Friends, I have an embedded board with arm9 based 32 bit processor which has linux already ported on it. As vendor has not yet done it, I want to port wince on it. I have done required modification in the U-Boot bootloader and want to test it. I guess for that I need an wince image. Please feel free to provide any suggestion or hint on how we can create wince image with minimum functionality and capable to run on arm9 based 32 bit processor. Thanks, Ankur Tag: Use of CryptoMemory Tag: 112947
  - 24
    - Mounting Storage device with two physical partitions as two drives... hello, We have a storage device with two physical partitions of different sizes for which we have developed a storage driver(block driver using block driver IOCTLs ) in WinCE 5.0 and 6.0.Each physical partition has addresses starting from 0.Till now we have mounted one of the physical partitions with FAT file system and we perform read and write to that physical partition from our storage driver.Now we want to mount both the physical partitions as two separate drives during boot up itself using the same storage driver.We want FAT to manage both the partitions.I would really appreciate it if some one could give us ideas on how this can be accomplished.. Tag: Use of CryptoMemory Tag: 112943
  - 25
    - System timer not accurate Hi all I am using smdk2440 for wince 4.0. My problem is that the system timer run fast compared to real time. the result is that backlight time and suspend timeouts exhaust early instead at the time specified in settings. What may be the cause? kindly suggest. Many thanks -- Message posted via http://www.pocketpcjunkies.com Tag: Use of CryptoMemory Tag: 112940

Hi All
I am trying to use CryptoMemory from Atmel with S3C2440A and Wince 5.0. But
the I2C bus does not seem to be working. I think the reason is RD/WR bit in
command byte. The question is "How can I control RD/WR bit in S3C2440A?"

Thanks in advance for any help.
Thanks

--
Message posted via PocketPCJunkies.com
http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200806/1

Top