CE Build Process

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - NDIS doesn't respond to incoming packets from my miniport driver Hi, I am writing miniport driver on WinCE.Net 4.1 with Smartphone/PocketPC environment from Platform builder. I am able to do ping from my machine and is working fine. When other machines do a ping/telnet/ftp to my machine, the get timeout. My miniport driver receies the packets (ARP req, PING Req). I am indicating to the NDIS using NdisMIndicateReceivePacket(). It is received by the NDIS. But NDIS doesn't send any response back (ARP response, PING Response). The following is the trace in TCP/IP Stack and NDIS when PING request is received and indicated to NDIS: 392577 PID:c3c4e132 TID:43af6d32 0x83c11a84: Entering Ethernet Packet indicate 392579 PID:c3c4e132 TID:43af6d32 0x83c11a84: Packet Len is 3C 392582 PID:c3c4e132 TID:43af6d32 0x83c11a84: +TCP:tcpxsum entered w/ 0x00000 (0) Len = 20 392584 PID:c3c4e132 TID:43af6d32 0x83c11a84: -TCP:tcpxsum returning 0x0FFFF (65535) 392587 PID:c3c4e132 TID:43af6d32 0x83c11a84: +TCP:tcpxsum entered w/ 0x00000 (0) Len = 40 392589 PID:c3c4e132 TID:43af6d32 0x83c11a84: -TCP:tcpxsum returning 0x0FFFF (65535) 392592 PID:c3c4e132 TID:43af6d32 0x83c11a84: +TCP:tcpxsum entered w/ 0x00000 (0) Len = 8 392595 PID:c3c4e132 TID:43af6d32 0x83c11a84: -TCP:tcpxsum returning 0x0000A (10) 392597 PID:c3c4e132 TID:43af6d32 0x83c11a84: +TCP:tcpxsum entered w/ 0x00000 (0) Len = 32 392600 PID:c3c4e132 TID:43af6d32 0x83c11a84: -TCP:tcpxsum returning 0x0A3AA (41898) 392602 PID:c3c4e132 TID:43af6d32 0x83c11a84: *GetIPPacket: Packet 54E6C Pool 54BC0 392605 PID:c3c4e132 TID:43af6d32 0x83c11a84: +TCP:tcpxsum entered w/ 0x00000 (0) Len = 20 392607 PID:c3c4e132 TID:43af6d32 0x83c11a84: -TCP:tcpxsum returning 0x0B349 (45897) 392610 PID:c3c4e132 TID:43af6d32 ***NDIS*** (17, 412) 392613 PID:c3c4e132 TID:43af6d32 ==>ndisMSend 392616 PID:c3c4e132 TID:43af6d32 ***NDIS*** (b, 2769) 392618 PID:c3c4e132 TID:43af6d32 ==>ndisMQueueWorkItem 392621 PID:c3c4e132 TID:43af6d32 ***NDIS*** (b, 2802) 392624 PID:c3c4e132 TID:43af6d32 <==ndisMQueueWorkItem 392627 PID:c3c4e132 TID:43af6d32 ***NDIS*** (17, 470) 392629 PID:c3c4e132 TID:43af6d32 <==ndisMSend 392632 PID:c3c4e132 TID:43af6d32 0x83c11a84: Succesful Ethernet Packet Indication Looks like NDIS is trying to send some reponse but some how blocked. Am I missing anything here ? I checked OID_GEN_CURRENT_PACKET_FILTER, the last setting was 0x0000000F I am sending proper OID_GEN_LINK_SPEED response... 10Mbps I am using NdisMedium802_3 as medium type. I am sending 4.0 for OID_GEN_DRIVER_VERSION Is there anything that I am missing?? that causes Ndis not to send the response packets to the miniport driver ??? Cheers Srinivas Yarra Tag: CE Build Process Tag: 43136
  - 2
    - CreateFile() for stream stream file fail help please. I just don't get it. what I am missing? I create a custom stream driver in PB4.00. I checked with dumpbin/exports, the 10 functions are exported. I have checked my ce.bib and reginit.ini file I have a PB CE console app. and it failed with a GetLastError=55=> The specified network resource or device is no longer available. ERROR_DEV_NOT_EXIST ============= Dump of file liat.dll File Type: DLL Section contains the following exports for LIAT.dll 00000000 characteristics 3F9032F2 time date stamp Fri Oct 17 14:20:34 2003 0.00 version 1 ordinal base 10 number of functions 10 number of names ordinal hint RVA name 1 0 000011CC IQL_Close 2 1 00001100 IQL_Deinit 3 2 000012C8 IQL_IOControl 4 3 00001048 IQL_Init 5 4 00001168 IQL_Open 6 5 00001378 IQL_PowerDown 7 6 0000137C IQL_PowerUp 8 7 00001238 IQL_Read 9 8 00001298 IQL_Seek 10 9 00001268 IQL_Write Summary 1000 .data 1000 .pdata 1000 .rdata 1000 .reloc 1000 .text =========================== hStream=CreateFile(L"IQL1:", GENERIC_READ|GENERIC_WRITE, 0, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL); if (hStream==INVALID_HANDLE_VALUE) { printf("FAILED TO OPEN IQL1: DRIVER!\n"); printf("GetLastError=%d\n",GetLastError()); return FALSE; } ============================= platform.reg, reginit.ini: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\LIAT] "Prefix"="IQL" "Dll"="LIAT.dll" "Index"=dword:1 "Order"=dword:0 additional.bib, which is in ce.bib MODULES ; Name Path Memory Type ; -------------- --------------------------------------------- ---------- - LIAT.dll C:\WINCE400\PUBLIC\IQuumLIAT\LIAT\IQuumDevRel\LIAT.dll NK SH Tag: CE Build Process Tag: 43132
  - 3
    - Sboot hanging on CEPC I am trying to load a nk.bin image via serial link to a PII target with 128Mb of RAM. I ahve followed the instructions given as part of platform builder but the serial boot loader seems to hang - I cannot even Ctrl-Atl-Del warm boot. The output on the debug port follows Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Feb 23 2003 18:35:46 Copyright (c) 2000-2001 Microsoft Corporation Microsoft Windows CE Serial Bootloader for CE/PC (Mar 5 2003) Comm Port initialized @ 0x2F8 System ready! Preparing for download... Sending boot request... Waiting for boot ack... No more After the "Waiting for boot ack..." On a display on the target the last message is Jumping to 0x00135914 Any help would be appreciated. Thanks Jim Tag: CE Build Process Tag: 43119
  - 4
    - To Jeff Kelley (MS)... Hello Jeff, I'm referring to your article http://groups.google.de/groups?hl=de&lr=&ie=UTF-8&oe=UTF-8&selm=e0euKBnbDHA. 3620%40TK2MSFTNGP11.phx.gbl (which is no longer available in this group). Would you be so kind as to send me a copy of your ndisevent.h file? Thanks in advance Roland Tag: CE Build Process Tag: 43118
  - 5
    - Rtl8139 and 'One-Card Network Card Miniport Driver Test' Hi, I have a problem running CETK's 'One-Card Network Card Miniport Driver Test', on the PB 4.2 and XScale-based board with an on-board ethernet interface and 2 additional RTL8139 PCI cards. There are two configuration I use for testing: 1. - the 1st RTL NIC used for ethernet debug (and VMINI), - the 2nd RTL NIC used for test, - the internal NIC not active 2. - the 1st RTL NIC used for test, - the 2nd RTL NIC used for test, - the internal NIC used fro ethernet debug (and VMINI) The problem is that I cannot pass the test for the 1st configuration. However the second one works fine. Also if the first one is compiled in the debug mode it also passes. By failing I mean that the system hangs during the test. There is no fixed moment when it hangs. Instead it happens sometimes during the first subtest and sometimes it goes as far as to 'sending to a group of addresses' which is the last subtest. But it has never passed. I examined the RTL8139 ETHDBG driver and it looks OK for me. Other things that come into my mind are: a kitl problem, a pci problem or maybe the test itself has some defect(s) (I've notied for example that there are memory leaks within the test - but not sure if they're the reason of my problem). Can anyone help ? Thanks, Zbyszek Tag: CE Build Process Tag: 43111
  - 6
    - NVIDIA display driver problem Hello, I setup a CEPC. NVIDIA display driver is used in this CEPC. Becouse of not located NVIDIA driver in Windows CE .NET, the resolution in CEPC is really bad. My question is how to install NVIDIA driver to my CEPC? Thanks a lot for your help! best regards sezin Tag: CE Build Process Tag: 43110
  - 7
    - Synchronization on OAL I hope someone can suggest a solution to this. I have an RTC chip along with other stuff on the I2C bus (XScale). I need to access RTC in OAL (OEMSetRealTime and OEMIoControl(KERNEL_IOCTL_INIT_RTC)). Both of these routines can be invoked by users willy-nilly while the system is running. At the same time, I have other drivers accessing other stuff on I2C bus. I have a library (.lib) that the OAL routines and the I2C driver for the rest of the world link in to communicate with the I2C. It appears (I learned this the hard way) that the OAL routines get linked into the kernel (who coulda thought?). The kernel does not link anything else of value to those of us wishing to do synchronization with the driver, except for a critical section. Unfortunately, critical section is no good when trying to synchronize between processes (as per CE documentation), unless the critical section is in a DLL that the processes share. So here is my dilemma. Is it safe to make the library into a DLL and link a DLL into the kernel (or to be more precise, link the stub into the kernel with the expectation that the DLL will be loaded by the kernel later)? Or can I dare link in coredll.lib and use things like semaphores for synchronization? The only other alternative I can think of is roll my own semaphore using a fixed RAM location (could get nasty) or an unused peripheral status register (what an ugly hack)... This problem cannot be that exotic - I imagine tons of platforms out there have an I2C based RTC and at least a serial eeprom or something else accessible to user on the I2C. Can anyone suggest a workable solution bettern than the hack I described or perhaps share an approach that worked in the past? Thanks in advance, Mike Goltsman Tag: CE Build Process Tag: 43103
  - 8
    - PPC 2003 Software Adaptation Kit? Hey guys. I've been trying to compile some of the BSPs we received from Intel for our NBMMNS2BVS DVK eval board, and I'm a little bit confused about something. One of the BSPs, the "Windows Mobile 2003 for Pocket PC" BSP, says that it requires the "Microsoft Windows Mobile 2003 for Pocket PC Software Adaptation Kit" to properly compile the BSP. Now, I've built platforms before, so I originally just ignored this, added the "Mainstone.cec" in the platform directory to my catalog manually, and attempted to build a platform using plain-old Platform Builder 4.2. I quickly started running into different errors that looked like there were some system headers missing. I couldn't find them anywhere on my PC. So, I fell back to their build instructions, and it quickly starts referencing a "bldplat.bat" that wasn't even included with the BSP. My current course of action is to continue trying to build the platform through Platform Builder in the usual way by removing components from my configuration that run into problems. However, this already isn't working too well because the first thing that I had problems with was the audio driver, and I need that more than I need the display. If anyone could tell me what this "Software Adaptation Kit" is, or where I can get it (none of us here could find it on Microsoft's site), I'd greatly appreciate it. Thanks in advance guys. Mark Murawski Vocollect, Inc. Tag: CE Build Process Tag: 43102
  - 9
    - PB3.0 eval Hi all, Does anyone know if there's an eval of PB3.0 available. I can only get PB4.2 ? MTIA Mark Tag: CE Build Process Tag: 43097
  - 10
    - How to build wininet.lib in pb410? I use PXA250 BSP build SDK. In eVC4.0, I build MFC hello Application, LINK : fatal error LNK1104: cannot open file 'wininet.lib' how to build wininet.lib in pb410? Tag: CE Build Process Tag: 43095
  - 11
    - propagating changes in project.reg & platform.reg Hello, I've been operating under the assumption that when I make a change in either platform.reg or project.reg, all that's needed to propagate these changes into my image is to call Make Image from the build menu. Lately though, I've been coming across cases where my changes don't make it to the image. An example would be serial port settings, or display adapter parameters such as resolution, pixel depth, etc. So is my assumption correct and my problem elsewhere, or was my assumption wrong all along? Also, which is processed last between platform.reg & project.reg? What I mean is, if the same reg key is assigned different values in both of these files, which will overwrite which? Thank you. Tag: CE Build Process Tag: 43094
  - 12
    - propagating changes in project.reg & platform.reg Hello, I've been operating under the assumption that when I make a change in either platform.reg or project.reg, all that's needed to propagate these changes into my image is to call Make Image from the build menu. Lately though, I've been coming across cases where my changes don't make it to the image. An example would be serial port settings, or display adapter parameters such as resolution, pixel depth, etc. So is my assumption correct and my problem elsewhere, or was my assumption wrong all along? Also, which is processed last between platform.reg & project.reg? What I mean is, if the same reg key is assigned different values in both of these files, which will overwrite which? Thank you. Tag: CE Build Process Tag: 43093
  - 13
    - What's the difference of pocket pc 2002 and wince I have installed a CF camera on pocket pc 2002.. it work.. but when i installed in wince 4.1.. and install the driver and software.. it can't run the application .... what's problem? Tag: CE Build Process Tag: 43090
  - 14
    - What is GetForegroundKeyboardTarget() function for ? Good morning experts, inside the code for taskman shell for thin client in Platform Builder 4.1 there is place where a function GetForegroundKeyboardTarget(), mentioned in header is called : ... SendMessage(GetForegroundKeyboardTarget(),WM_KEYUP, VK_CONTROL, NULL); ... I have searched the documentation and only had found, that this function is a part of core.dll and declaration for this function is at pwinuser.h. Can anyone tell what this function is for and what it is supposed to do ? In our case this function call appears to hang the active connection to Citrix Metaframe FR2 from the device using ICA protocol. Best regards Sergei Tag: CE Build Process Tag: 43086
  - 15
    - The problem of PS/2 keyboard on CE4.2 Hi all, I use the X86 platform on CE4.2. There is a problem on PS/2 keyboard. The problem is that the PS/2 keyboard driver will output the wrong scan code after do suspend/resume. After do some testing, I find that the wrong scan code is caused by the misjudgement of the ps/2 driver. The driver think that the keyboard is a AT-type keyboard, but actually I'm using a XT-type keyboard. The problem only happens after do suspend/resume. Does anyone know how to transform the AT-type scan code into the XT-type scan code? Thanks in advance! Tag: CE Build Process Tag: 43084
  - 16
    - How to set the ativity time of mouse right button in AYGSHELL API SET? Dear Sir. I included AYGSHELL API SET component at CE 4.2 When I clicked the left button of mouse or touch during 1 sec, It was displayed the right button message box. I want to change the pressed time from 1 sec to 2sec. Please let me know it. -- Thanks., -------------------------------- Skyblue Ahn /SW Team Manager Atrium C&I Co., Ltd. Tel: 82-2-2122-3111 Fax: 82-2-761-3541 Mobile: 82-18-222-2244 Mail : skyblue@atriumcni.com skyblue@prumail.co.kr ------------------------------- Tag: CE Build Process Tag: 43081
  - 17
    - usb printer Hi,all Now I want to add a usb printer on a target device which runs wince.net 4.1.What should I do?How to configure the ".reg" file and add what features? When I print some text in wordpad,it displays a dialog box"hp laserjet 1000 is overtime on LPT1". Thank you for your help Tag: CE Build Process Tag: 43080
  - 18
    - How to replace the default background Image with onother bmp file Hey experts, I am new in working with Platform Builder and I am facing a lot if difficulties. I am using Platform Builder 4.1. I don't know how to replace the default background image with onother bmp file. In which directory I have to put the bmp file with which I want to replace the default wallpaper. I assume that it should be in the directory where the current wallpaper is. But I don't know where this directory is (or may be I am wrong). What exactly I have to write in the registry file? Is it something like: HKEY_LOCAL_MACHINE\ControlPanel\desktop "Wallpaper" = "\$(_WINCEROOT)\Samples\deskpicture.bmp" I will really appreciate if you help me. Thank you in advance. Petko Tag: CE Build Process Tag: 43067
  - 19
    - pci RESUMING I can see my PCI is asserting the IRQ line, but how come the OS is not wakened up? I have called KernelIoControl(IOCTL_HAL_ENABLE_WAKE, &m_dwSysIntr, sizeof(m_dwSysIntr), NULL, 0, NULL); to associate my interrupt with the system wakeup sources. Any particuliar requirement on the PCI device, I am using a PLX as the bridge. any particuliar wrong? Ying/ "Ten" <nick.bartolotti@tentechnologies.com> wrote in message news:KJwjb.33095$Hs.30478@twister.nyroc.rr.com... > Are you using GIIS? Perhaps the first PCI device is handled through GIIS > and yours is not. > > Did you write a device driver for your PCI card? If so, then you should > have written an ISR and IST to handle all the interrupts. This routine > should be notified of any activity on the IRQ lines for your device. > > Once the IRQ is detected, you should be able to wake up the OS. I'm not > sure if you need to register your device driver with the OS so the OS > recognizes it as a source for a resume instruction. > > Search for RequestPowerNotifications and SetSystemPowerState for information > on how to wake up the system from your driver. > > Nick. > > > > "Patrick Zou" <patrick_zou_nospam@hotmail.com> wrote in message > news:ON1agf3kDHA.1800@TK2MSFTNGP10.phx.gbl... > > In a CEPC enviroment, a PCI device could resume the system. I guess the > > resuming source is the interrupt line. If there is any signalling on the > > interrupt line, system could resume. ( I guess this is correct, I have > > suspected it could something related to the Isrinfo structure, there are 2 > > fiedls called checkmask, and checkport, I commented this out, the resuming > > still works. That means, the only source is the interrupt line). > > > > OK, I have another PCI device, which is designed by us, there are some > > activities on ther interrupt line, but however, system dosn't resume? so > Is > > there any requirement on the resuming signalling? like the interrupt has > to > > be long enought for X ms? > > > > thanks > > Ying/ > > > > > > Tag: CE Build Process Tag: 43066
  - 20
    - Expectation about a BSP and question about eboot Hi, I have a few problems I have been working on lately and would like some inputs on these matters. First what's to be expected when a board supplier provides you with a BSP. What I mean is if I choose to build a new platform based on that bsp and choose a standard setup, compile it. Should I expect it to boot without modifying anything ? So far I have had errors from ethernet drivers and PCI bus. Second, I have tried with every boot.bin found on my system to get the startup to connect to PB. And i always get either unsupported ethernet card or Self test failed message. I have been told by the supplier that the card is working ok. Could I have missed something here. Thank to all repplies Tag: CE Build Process Tag: 43059
  - 21
    - CE Build Process Hi, Just trying to get a better understand of what happens when I hit "rebuild platform" from the PB4.1 IDE. What is executed first (is it wince.bat??) when I hit rebuild platform. I did read the two excellent articals in the "Get Embedded" column "Windows CE: Inside the build system" and "Customizing the windows ce build system", but wanted a little more detail. Guess I'm hoppin to find the starting point and then can trace through the build process. Thanks again, Willie Tag: CE Build Process Tag: 43058
  - 22
    - registry icons Are there any redistributable registry (rubik's cube) icons anywhere in CE ? I haven't found any in any of the public res files, but it would be nice to use a well-known and established icon on CE. Tag: CE Build Process Tag: 43056
  - 23
    - ethernet download problem Hi ALL, I am new to Windows CE and currently working on ethernet dowload. During the download i keep getting the errors on my hyperterminal "TFTP: Desktop losing ACK, block number = 1","TFTP: Desktop losing ACK, block number = 2" and so on. I am not very familiar with TFTP protocol so can somebody tell me what could be the probable cause. Thanks Ashish Tag: CE Build Process Tag: 43055
  - 24
    - auto starting Remote Display application Hi, everyone, I have a CE .NET device without any keyboard/mouse input. I can use the Remote Display Control to connect to this device. But I have problem starting the cerdisp program on the target since I will not have KITL in a ship product. I tried starting cerdisp at windows startup but it failed because cerdisp starts too early. Neither activesync or the CF ethernet connection has been initialized at that moment. So 1) Is the Remote Display Control capable of sitting as a server and wait for connection? 2) Is there an easy way to start a progam with some delay like 5 seconds? Thank you. Derek Tag: CE Build Process Tag: 43044
  - 25
    - About CE Interrupt Machine! Dear Sirs, I read the word about CE's Interrupt is that,first find the entry,then setevent,wait for dispatch to finish truely process,like Linux. but I'm not study Linux,so please talk about de Interrupt machine! Thanks, Tag: CE Build Process Tag: 43042
- Next
  - 1
    - How to assign CE's Priority? Dear Sirs, why pHashThread[PRIORITY_LEVEL_HASHSIZE]£¬PRIORITY_LEVEL_HASHSIZE£½32,set the thread priority from 255 to 248 can only allocate to pHashThread[31],but how to thread of THREAD_PRIORIY_TIME_CRITICAL and THREAD_PRIORITY_IDLE shared cpu? i think the priority of 255~248 is corresponding to THREAD_PRIORITY_TIME_CRITICAL~THREAD_PRIORITY_IDLE,is right? Thanks, Tag: CE Build Process Tag: 43040
  - 2
    - Error spawning cebuild.bat Hi. A can't build any of my (working) paltforms. Always i get: --------------------Configuration: C3E_733 - CEPC: X86 Win32 (WCE x86) Release-------------------- Generating platform header files... VcSpawn: could not find 'cebuild.bat' Error PB2504: Error spawning cebuild.bat C3E_733 - 1 error(s), 0 warning(s) Andybody an idea? Best regards A. Gubelmann Tag: CE Build Process Tag: 43036
  - 3
    - Error PB2502 --------------------Configuration: IQUUMDEV - IQuumDev Win32 (WCE ARMV4I) Release-------------------- Platform header files are up-to-date... Performing Additional Build Actions... --------------------Configuration: LIAT - LIAT WIN32 (WCE ARMV4I) RELEASE-------------------- Error PB2502: The feature does not support this configuration. The feature cannot be built I google search on this, but I didn't see any answers. Have any figure this out why it happen? I created a project(a dll) to a ARM4I based platform. The compile is create with no error, but when I do a "build selected feature", and this error comes out. I think something got corrupt/changed. I remember it was working fine with "build platform". then I saw that problem with "using old style fixup...", so I try to fix that with /savebaserelocations:... a few times(typo,etc..), due suddenly I saw that PB2502 error, and I wasn't able to fix it no matter what I do. I try. deleting all the regenerable files, rebuilt platform(clean, not clean), create another project, nothing works. check the project setting also. But if I create new platform(pda, same as previous one) and add/insert the project into this platform with/without the /savebaserelocations fix. Everything is fine. Anyone know how to fix that. Tag: CE Build Process Tag: 43033
  - 4
    - WMA playback via RenderFile Our platform is x86 based processor on CE.NET 4.2. RenderFile from a FilterGraph interface on WMA files does not appear to be working. Note: - WMA and MP3 playback work via the Media Player component from Platform builder - MP3 playback works via 'RenderFile' inside custom application. - WMA playback does NOT work via 'RenderFile' inside custom application. The error code returned is unidentifiable at something like 0xc00d0026. Since the media player can play it, I assume this means the correct components have been added in platform builder. On DX9 you have to add a WM9 'AsfReader' filter to the graph and render each pin seperately for WMA files. This component appear to be a WM9 component and is not available on CE. Any ideas ? Thanks, Jason Tag: CE Build Process Tag: 43032
  - 5
    - Rolling an SDK which includes the .NET Compact Framework Has anyone encountered the following bug in rolling an SDK from PB4.1? When you specify an emulator skin, the rolled SDK includes a registry setting which points to this skin. Unfortunately, the value points to a directory. Visual Studio .NET 2003 expects the value to point to the skin XML file. Therefore, when you try to run a .NET CF app from VS.NET, it gives an error, "XML skin is not valid." VS.NET Tools for Windows CE contains a manual fix for the problem. But I would like to fix it in the SDK msi itself. Any suggestions? Also, is there any way of specifying the dimentions of a default form in Visual Studio while building an SDK? The Pocket PC SDK does this. Regards Anil Tag: CE Build Process Tag: 43028
  - 6
    - Firewall problem Hi all. I am a CE 4.2 Platform that includes a firewall. I am able to perform successful incoming/outgoing TCP transfers. However, I am unable to perform the WinInet functions that handle FTP transfers [InternetConnect(), FtpPutFile()]. I relealize that the cause for that is that the firewall's ftp protocol handler tries to access payload of packet which is not in contiguous buffer and that the firewall doesn't handle flattening non-contiguous buffers and that the result will be that the ftp handler will not process this packet. My question is how can I still use both a firewall and the WinInet FTP routines? Thanks Offir. Tag: CE Build Process Tag: 43024
  - 7
    - problem about cepcboot.144 which is copied to floppy!!!! Hello everybody, I copy cepcboot.144 to floppy disk. Because of running from floppy disk too slowly and not connecting to my working pc through ethernet, I decicded to copy the contents of this floppy disk to my Cepc hard disk. However, Cepc pc doesn't started from this hard disk. "Wrong system disk" error is dissappered in screen. What is the reason of this? how can I boot from hard disk? best regards sezin Tag: CE Build Process Tag: 43022
  - 8
    - Course Recommendation? I am new to Windows CE.NET 4.2 and I am looking for a course to teach me every aspect of building embedded systems using this software. Could anybody recommend a very good course which will cover Windows CE.NET 4.2 in great detail including how to get applications that usually run on Windows 2000 to run on Windows CE.NET? I am based in London, U.K. Thanks Tag: CE Build Process Tag: 43019
  - 9
    - PS2 keyboard driver issue at WINCE4.2 Dear all: I used the Geode X86 platform to port wince 4.2 drivers. There are two issues about PS2 keyboard driver. 1. PS/2 keyboard driver will auto-repeating continue the key action and can¡¦t be stopped. When we boot up the device, and press one key of the PS2 keyboard, it will auto-repeating continue the key action. 2. PS/2 keyboard driver retrieve the wrong scan code after suspend/resume. When we boot up the device, and press one key of the PS2 keyboard. After going to suspend/resume and then press the same key of the PS2 keyboard and retireve the scan code. The latter scan code is not the same with the former scan code, it retrieved the wrong scan code. If you have any idea,please advised me. Thanks. best regards, Brian Tag: CE Build Process Tag: 43017
  - 10
    - Once more Mousecursor on Touchdevices Hi, i read all the messages with mousecursor problems on different PB Versions. Last year I made a PB3.0 WinCE Image without the mousecursor for our Touchbased device. Because all those BSP_NOCURSOR ... variables don't worked I ended up changing the cesysgen.bat deleting all mcursor mcursor8 components. The mouse does not appear anymore and I was very astonished to see something like a WAIT-CURSOR when system was busy. That was just what I want! Fine! Now I'm developing against a PB4.1 Terminal Client Image. I thought that MS has done something to allow a Mousecursor when a Mouse is detected and hide it when no Mouse is present. But its the same disappointment then before. (maybe its better in 4.2, my next odyssey). So I oncemore made the changes in cesysgen.bat like this: SYSGEN_TOUCH is set. set GWE3_COMPONENTS=%GWE3_COMPONENTS% iconcmn icon iconcurs set GWE3_COMPONENTS=%GWE3_COMPONENTS% TouchCursorOnly cursor cursor8 Ok, mouse is not present anymore but where is this fine WAIT-CURSOR I saw in PB3.0. Has anyone any experience with this? Tag: CE Build Process Tag: 43016
  - 11
    - About PCMCIA I had a Card Reader Chip is TI1225 and used the TI1250 Driver for CE.NET4.1 in CEPC. The TI1250 Driver for Card Reader is OK. When I put the PCMCIA card into Card Reader, it fail for the PCMCIA card. The debug message is follow. 169302 PID:277bb21a TID:475d92d2 0x875c8800: >>> Loading module prismnds.dll at address 0x01E00000-0x01EA6000 171698 PID:277bb21a TID:475d92d2 0x875c8800: DEVICE!ActivateDeviceEx(Drivers\PCMCIA\UNKNOWN_MANUFACTURER-0000) entered 171699 PID:277bb21a TID:475d92d2 ==>NdisInitializeWrapper 171699 PID:277bb21a TID:475d92d2 <==NdisInitializeWrapper 171700 PID:277bb21a TID:475d92d2 ==>NdisMRegisterMiniport: NdisWrapperHandle 0005CDF0 171700 PID:277bb21a TID:475d92d2 ==>ndisRegisterMiniportDriver: NdisWrapperHandle 0005CDF0 171700 PID:277bb21a TID:475d92d2 <==ndisRegisterMiniportDriver: MiniBlock 00030560 171700 PID:277bb21a TID:475d92d2 NdisMRegisterMiniport: MiniBlock 00030560 171700 PID:277bb21a TID:475d92d2 <==NdisMRegisterMiniport: MiniBlock 00030560, Status 0 171700 PID:277bb21a TID:475d92d2 171701 PID:277bb21a TID:475d92d2 ndisMInitializeAdapter: Miniport 0030E4B4, 171702 PID:277bb21a TID:475d92d2 ==>ndisQueueMiniportOnDriver: Miniport 0030E4B4, MiniBlock 00030560 171702 PID:277bb21a TID:475d92d2 <==ndisQueueMiniportOnDriver: Miniport 0030E4B4, MiniBlock 00030560, rc 1 171704 PID:277bb21a TID:475d92d2 ==>NdisMSetAttributesEx: Miniport 0030E4B4 171704 PID:277bb21a TID:475d92d2 0x875c8800: NDIS: ERROR-CardGetParsedTuple failed 31 171704 PID:277bb21a TID:475d92d2 0x875c8800: NDIS: ERROR-INdisGetPcmciaWindow failed 0xc000009a 171704 PID:277bb21a TID:475d92d2 ==>NdisMDeregisterAdapterShutdownHandler: Miniport 0030E4B4 171704 PID:277bb21a TID:475d92d2 <==NdisMDeregisterAdapterShutdownHandler: Miniport 0030E4B4 171704 PID:277bb21a TID:475d92d2 ***NDIS*** (b, 2064) 171704 PID:277bb21a TID:475d92d2 INIT FAILURE: Dequeueing the miniport from the driver block. 171705 PID:277bb21a TID:475d92d2 ==>ndisDeQueueMiniportOnDriver, Miniport 0030E4B4, MiniBlock 00030560 171705 PID:277bb21a TID:475d92d2 <==ndisDeQueueMiniportOnDriver: Miniport 0030E4B4, MiniBlock 00030560 171705 PID:277bb21a TID:475d92d2 ***NDIS*** (b, 2091) 171705 PID:277bb21a TID:475d92d2 INIT FAILURE: Dereferencing the miniport block. 171705 PID:277bb21a TID:475d92d2 ndisDereferenceMiniport:Miniport 0030E4B4, Ref = 0 171705 PID:277bb21a TID:475d92d2 ==>ndisMUnload: DriverObject 0005CD60 171706 PID:277bb21a TID:475d92d2 ndisMUnload: MiniBlock 00030560 171706 PID:277bb21a TID:475d92d2 <==ndisMUnload: DriverObject 0005CD60, MiniBlock 00030560 Unloaded symbols for 'D:\JOSDAR\VIA\RELDIR\VIACEPC_CLE266_BASED_X86DEBUG\PRISMNDS.DLL' 171713 PID:277bb21a TID:475d92d2 0x875c8800: <<< Unloading module prismnds.dll at address 0x01E00000-0x01EA6000 Does anyone knows what is error? I also find my PCMCIA card can't plug in. I need the help. Best Regard. Tag: CE Build Process Tag: 43014
  - 12
    - ARM-based Loading Testing Tool (WinCE.NET 4.2) Dear Sirs, Do anyone know how to check the CPU loading for ARM-based platform (Ex: XScale CPU)? I want to check my driver loading under ARM-based CPU. Thanks, JLL Tag: CE Build Process Tag: 43011
  - 13
    - ARM-based Loading Testing Tool (WinCE.NET 4.2) Dear Sirs, Do anyone know how to check the CPU loading for ARM-based platform (Ex: XScale CPU)? I want to check my driver loading under ARM-based CPU. Thanks, JLL Tag: CE Build Process Tag: 43010
  - 14
    - ARM-based Loading Tool Under WinCE.NET 4.2 Dear Sirs, Do anyone know how to check CPU loading on Windows CE 4.2 Image? Does it have an API to bundle this value into my test program? Thanks, JLL Tag: CE Build Process Tag: 43009
  - 15
    - What's the purpuse of Miscellaneous Write Register in lubbock baseboard provided by intel? I found "MISC_WR_OFFSET" string in two functions, which is OEMPowerOff and PmgrResume in pmgrxsc1.s file. OEMPowerOff function store the value of Miscellaneous Write Register. PmgrResume function restore the value of Miscellaneous Write Register. My question is: Where the value of Miscellaneous Write Register is set or changed? Tag: CE Build Process Tag: 43008
  - 16
    - how do CE identify card detect is passed to system? my xscale board based on lobbock pxa 263's CF slot work fine with eboot and KITL, but CE don't show anything up when i insert a memory card or modem card. I want to know where and how do ce system check card detect? thanks in advance -- -------------------------------- kccheng www.kachun.com Tag: CE Build Process Tag: 43006
  - 17
    - custom USB device driver usage in application Hi, I have been developing a custom USB class driver. So, I don't want to use stream interface or other windows CE API to access my device. My device driver is loaded by USBD when I connect my device to windows CE 3.0. Now the question: How can I get these functions (provided by usbd and my class driver) for my application so that I can normally call them from my application? -mikko Tag: CE Build Process Tag: 43005
  - 18
    - How to identify CF storage card name with logical volume ( such as card created using ramdisk ) Hi All, How to get the volume name ( folder name ) of CF card once get inserted? How to distinguish the volume name between CF card with logical card created using RAMDISK. Have anyone successfully got notification of SHCNE_MEDIAINSERTED? Plesae help me. Thanks, GP. Tag: CE Build Process Tag: 43003
  - 19
    - USB host problem!!!! My platform is SMDK2410.CPU supports 2-port USB host interface,and USB controller complies with OHCI rev 1.0.I want to use 2 SB host.At current ,the first USB port works well but the second don't work.As far as I know, the OHCI driver is similar to other cpu's BSP(e.g:SA11x0) for WinCE.Only interrupt and membase is different.Right?Must I set up another interrupt number for the second USB port? Thanks all the help in advance! Power.P Tag: CE Build Process Tag: 43002
  - 20
    - IButton Windows CE How to do install ibutton Windows CE for use my application ? I didnt find driver Ibutton for Windows CE. Ibutton connected via Rs232 to Windows CE intalled Device. But i coudnt read Ibutton Id from Rs232. Tag: CE Build Process Tag: 42999
  - 21
    - TUX RWTEST test 2003 failure issue I've seen posts to this group before talking about the TUX RWTEST failing on test 2003 for no apparent reason (all other tests succeed). There was some statements made about possible bugs in the FAL and the necessity to have sectors be 512 bytes and a multiple of 256 sectors per block. However, I never saw any conclusive resolution to this. I'm seeing the exact same issue on the system I'm working on right now. Is this a bug in RWTEST (it really appears to be reading data before its written) or is it a FAL issue? What is the resolution? Thanks, Mark Moeller Qualnetics Corporation Tag: CE Build Process Tag: 42993
  - 22
    - [CETK] ndis 2 card test on 2 target -- Harishr help me Dear All Could anybody describe more detail about this test Everytime I run this time, it just tell me 63c591fa: ndt_2c ERROR: NDTStartup for 'CISCO1@192.168.230.222' failed with hr=0x8007274d 63c591fa: ndt_2c ERROR: NDTBindProtocol for 'CISCO1@192.168.230.222' failed with hr=0x80072736 "ndt_2c" returned SPR_FAIL while handling the SPM_SHELL_INFO message. This DLL has been unloaded as requested. The CETK help has only little information about this I still have no idea how to setup the environment BR. Phoebus Yang Tag: CE Build Process Tag: 42990
  - 23
    - How to deploy a MFC/ActiveX control app to platform? Dear all, Now, we encountered a problem about adding applications to OS platform. Our applications are developed by EVC++ 4.0 ; their projects are MFC application and MFC ActiveX Control in EVC++ 4.0. But project wizard in Platform Builder can not find any project about MFC application and MFC ActiveX Control . Could you tell us how to add MFC application and MFC ActiveX Control to OS platform? Thanks! PS: We're using WinCE.NET 4.2 and Platform configuration is Mobile-Handheld for project development ; our SDB is Intel DBPXA255. Kemin Tag: CE Build Process Tag: 42989
  - 24
    - How to add the cdrom into the system,include Hive-Based Registry When I add the Hive-Based Registry,the cdrom will dismiss in the system.And I disable the Hive-Based Registry,the cdrom will turn to OK.So I ask for help.thanks. Tag: CE Build Process Tag: 42988
  - 25
    - Image download NB0 hi, as far as i know we can download nk.bin file using PB , can anyone help to tell me how can we manage to download nk.nb0 file using PB , if we can't what are the other possibilities. thanx Umesh Tag: CE Build Process Tag: 42987

Hi,

Trying to get a better understanding of what happens when
I hit "rebuild platform" on PB4.1 IDE.

Question is, what is run first (wince.bat?) when I hit
rebuild platform?

I've read the 2 excellent articles in the "get embedded"
column "inside the build system" and "customizing the
windows ce build system" but hoping to get a little more
detail.

Think I just need the starting point and can trace
through from there!!

Thanks again,
Willie

Top