Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - MmMapIoSpace() v.s. VirtualAlloc() + VirtualCopy() What's the difference between MmMapIoSpace() and VirtualAlloc() + VirtualCopy(), since both of them seemed to convert a physical io address to a virtual address. Thank you! Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58689
  - 2
    - CE.NET training courseware I here the official MS CE.NET courseware may finally be updated to CE.NET 5.0. Any truth to this? Any ideas as to when? Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58687
  - 3
    - Falcon MIPS vr4121 platform.... I am trying to bring a Falcon (MIPS 4121) BSP from 4.1 to 5.0. Since the falcon is not officially supported anymore and I am normally not doing any kernel work, I was wondering if somebody has done that before or can help me a little with some fundamentals:-): I read through the CE5 docu and it says "All MIPS platforms have been migrated into one". (no more NKMIPSIIb.lib for example). Well - does that mean the I can use the mips NK.lib for my BSP? Next there are tons of cool nice little libraries under "\platform\common\lib\mipsii\" But which ones to use for the 4121? For example: One of the migration steps I have to do is to create the OEMCacheRancheFlush function. THe docu says I can simply use one form the common\libs directory ....but which one to use? There are oal_cache.lib oal_cache_mips.lib oal_cache_mips32.lib oal_cache_vr4131.lib (not exactly the same as my CPU but very close ... I hope:-( ) This library confusion continues with "oal_intr...lib" and other libs... I do have a 4.1 kernel but it does not expose all functions/methods/apis that CE needs... Does anybody have a good hint how I should start and what I should use? Chris Muench (Embedded MVP - but normally above the kernel:-)) Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58686
  - 4
    - **REPOST** ATA problem with multi PCI-IDE cards. I have tried only with two PCI-IDE s with one disk connected to each of them (as masters)...which doesn't work......any problems with this configuration? -- cheers, Joseph Garibaldi. B'lore, India. ################################################################ "Ten" <nospam@nospam.net> wrote in message news:ugeZuretEHA.2876@TK2MSFTNGP14.phx.gbl... > Are you using multiple drives on each PCI IDE card or only masters on each > card? > ################################################################ talking about ATA driver, has anybody tried the driver with multi-PCI IDE s ?? (WinCE 4.2) I am facing a peculiar problem here with the upper byte of every word read from the data register being 0 (which obviously is a problem for both Identify Data and PIO modes)..This happens only when I work with multi (have tried it only with two) PCI-IDE s and this corruption happens only with the pci IDE card which has a greater PCI Device number. The pci IDE card with lesser PCI Device Number works just fine. With one PCI - IDE device, it works fine. -- cheers, Joseph Garibaldi. B'lore, India. Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58678
  - 5
    - Failed to add project in PB4.2 Hi, I tried to add an existing project to my workspace in PB 4.2, through project->Insert->Existing project, but did not get any result. Does anyone know the reseaon? Thanks JWU Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58677
  - 6
    - "?ASP Support" in PB 4.2 Platform Feature view and ASP no longer w I have had Web Server + ASP support in and working for awhile in my platform but now I can't open an ASP page (Error 501/505). The CE device will serve html files but refuses to open the simplest ASP file. Also my Platform Feature View shows question marks as follows: !Web Server (HTTPD) ?Active Server Pages (ASP) Support ?Device Management ISAPI Extension ?Web Server Administration ISAPI any seen this? what do the question marks mean? Platform builds with no warnings or errors and runs otherwise... Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58674
  - 7
    - USB Client Driver Development I'm doing development on the PPC 2003 environment. I'm trying to develop a client USB driver for PPC 2003 to communicate with our host device. The development environment that we use is MS EVC++ 4.0, the specific device this is being attempted with is the HP IPAQ 6315. Does anyone here have any experience with doing USB development with the PPC 2003? Some of the issues of come up against is it appears from the Win CE 4.2 SDK that it only supports host functionality while the Hp device itself and most PDA's only have client controllers. The device enumerates fine, I was wondering how I could go about getting access to endpoints to send and receive data? -- Jeremy T. Software Engineer Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58673
  - 8
    - CE 5.0 pcibus registry question Hi all, [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI] "Dll"="PCIbus.dll" "Order"=dword:20 "Flags"=dword:8 "BusIoctl"=dword:2a0048 What doest the Flags=dword:8 mean ? In CE 4.X the Flags is equal to "1". I use "1" in CE 4.x and my USB HID works fine, but I have to use "8" to make it work in CE 5.0. I can not find the document about the Flags. Please tell me what doest the flags mean? Thanks, Bryan Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58670
  - 9
    - WinCE QFE releases for the weeks of October 11 - October 22, 2004 The following updates for Windows CE have been recently released and are available for download. More information for each update is provided in the Readme document available after the individual update(s) has been installed. Windows CE .NET 4.2 Update name: Windows CE .NET 4.2 Platform Builder QFE 041001_KB883650 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=BE2FC0C5-1688-499E-91C3-260501748B64&displaylang=en Component: DirectShow Description: The audio driver does not allow ring tones to be played through Windows Media Player DirectShow engine and may cause the device to cease responding. Update name: Windows CE .NET 4.2 Platform Builder QFE 041008_KB885418 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=1BDD6BE4-1B5A-4A11-8B36-212606EA90B3&displaylang=en Component: PPP Description: PPP Server reads incorrect data from the registry at startup and may get improperly configured. Update name: Windows CE .NET 4.2 Platform Builder QFE 041015_KB887538 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=1A9E1A71-262D-4928-8110-2BD13FE09F5B&displaylang=en Component: WMP Control Description: A buffer overrun may occur when trying to open a URL of greater than 248 characters. Update name: Windows CE .NET 4.2 Platform Builder QFE 041015_KB886682 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=BDE84C75-764D-4690-95B1-D68385EFA801&displaylang=en Component: HTTPD Description: A Windows CE .NET 4.2 device configured as a Web Server may timeout and fail large file uploads. Update name: Windows CE .NET 4.2 Platform Builder QFE 041015_KB867779 Download link: http://www.microsoft.com/downloads/details.aspx?FamilyId=4EED36EE-9F6D-4DF8-B1E4-AA348463CC98&displaylang=en Component: EAP Description: Windows CE .NET 4.2 devices using PEAP over 802.11 may leak memory with every reauthentication request. Download Link - directs you to the Microsoft Download Center page associated with each update. Each update is contained in a self-extracting compressed file. Component - displays the module(s) updated in each QFE Description - provides more information on the issue(s) fixed **DO NOT REPLY - THIS E-MAIL IS BEING SENT TO YOU FROM AN UNMONITORED ACCOUNT. Due to Microsoft's security requirements, the hyperlink(s) contained in this e-mail may not automatically open your browser. If you experience any difficulty, please copy the link and paste into your browser. ** Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58666
  - 10
    - Version Control for Platform Builder Hello Experts, What are some of the effective ways to do version control with Platform Builder? Right now I have the code under: PLATFORM\<myplatform> PLATFORM\COMMON\SRC\ARM\INTEL\<mycommon> Then, there comes the project, and the .cec file. What do you think would make sense and be easy to maintain? Is there way we can change the setting so that we can get the files from the same common root directory? Thanks, Nguyen Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58663
  - 11
    - WinCE hang on load symbol for serial Any advice will be high appreciated! I have struggle with it for several days. Another working weekend will come :( First, I assume that there maybe something wrong with the PDD part, eh? Because my BSP was cloned from "lubbock" for PB4.0, and I updated it to PB4.2, maybe there was something changed. But I am confused by the drvier source, XSC1_SER16550, XSC1_SerialPdd, COM_MDD, COM_MDD2. Is there anyone so kind to give me a clue to understand them? I know the layered drive is divided into MDD and PDD, but why here are 4 modules? btw, how to find the definition of SSDI between MDD and PDD for a special driver like this serial comm-port? I am full of gratitude to you for any help. ************************************************************************************************************************************ ************************************************************************************************************************************ My OS image startup process is stalled on loading symbols for _SERIAL.DL the latest messages from debug output window are: ======================================================================================================== 4294773656 PID:23c4948e TID:23c76eb6 0x83c49000: DEVICE!ActivateDeviceEx(Drivers\BuiltIn\Serial) entered 4294773670 PID:23c4948e TID:23c76eb6 0x83c49000: >>> Loading module xsc1bd_serial.dll at address 0x02EC0000-0x02EE4000 (RW data at 0x01F46000-0x01F46608) Loaded symbols for 'D:\MYWORK\LINDA\RELDIR\SITSANGDEBUG\XSC1BD_SERIAL.DLL' ========================================================================================================= The serial driver was cloned from lubbock. the PDD source should be D:\WINCE420\PLATFORM\Sitsang\drivers\SERIAL\XSC1_SER16550\ and ...\SERIAL\XSC1_SerialPdd\ MDD source should be D:\WINCE420\PUBLIC\COMMON\OAK\DRIVERS\SERIAL\COM_MDD and ..\SERIAL\COM_MDD2 Am I right? I am not sure why there are two MDD's ? In the DllEntry of MDD file ((SerialDllEntry() of MDD; DllEntry() of MDD2)) there is a statement: --------------------------------------------- { if ( dwReason == DLL_PROCESS_ATTACH ) { DEBUGREGISTER(hinstDll); DEBUGMSG (ZONE_INIT, (TEXT("serial port process attach\r\n"))); --------------------------------------------- But why I can not see the debug messagae "serial port process attach"; What should winCE do before call into DllEntry? Thanks a lot!! Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58655
  - 12
    - Priority of connection used to access Internet I have an issue that hope to get help from someone here and I will appreaciate that. I am using Windows CE 4.2, I just wondering that if both connection GPRS and WiFi are available at the same time. - Windows CE will use which one to access Internet? - Could we configure the priority of connection? if yes, how?? I am really hope some one may helping me to verify the issue above. Thank you very much! Best regards, Lamberto Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58654
  - 13
    - Book about Platform Builder Hi Guys, since Windows CE 3.0 there are a lot of changes in Windows CE (5.0), but all i can find about PB is the good ol' reference 'Building Powerful Platforms with Windows CE'. In the time of 3.0 it gave me a lot of informations about how PB internaly works and how to write drivers and applications. Also under CE 4.x it was a great source although there are several changes (e.g. creating BSPs). Now with CE 5.0 further changes came into platform builder including a lot of changes about directory structures and how all the files are organized. Due to the fact that i already got 'some' experience from the 'older' OSes i'm able to came through the new version and find everything needed. But you can't memorize everything all the time and writing everything onto several papers (or my own documentation about PB) isn't also the best way. So when will there be a new book about Platform Builder??? (Maybe 'Developing Windows CE.net Devices' will be published some lovely day) Regards, Oliver Münchow -- --------------------------------------- Gesytec GmbH eMail: 52076 Aachen omuenchowATgesytecDOTde http://www.gesytec.de Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58653
  - 14
    - NDIS: Adapter PCI\XXX1 - NOT using OPTIMIZED RX handler What does this debug message mean? NDIS: Adapter PCI\XXX1 - NOT using OPTIMIZED RX handler This message appears in the debug window, i think it comes from the pb 5.o, who know this message? Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58644
  - 15
    - how to set BSP_NO variables in .cec file? Dear gurus, I'm using CEPB 5.0. In cec files, I set BSP_NO variable as following: Variable( "BSP_NOUSB", ) so when I add the USB driver into my platform, I got BSP_NOUSB= but when I remove the USB driver from the platform, how can I get BSP_NOUSB=1? I know I can set BSP_NOUSB=1 in command line, .bib file, or other places. But what I really wanted is the variable is set automatically when I remove the driver. Can you help me? Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58643
  - 16
    - Windows CE .NET 4.1 Autodial with LAN connectivity Hi to all the CE gurus I'm trying to set up a CE platform that can do auto dial-up while having a local LAN connection when the IP address cannot be resolved. According to CE's documentation, the autodial does not try to make a connection when there is any form of connectivity. Unfortunately this is my situation. I have a local private LAN (10.0.0.xxx) using fixed IP addresses for local devices, but I also need to dial up when some third party software wants to connect to an ISP somewhere else. Is there anyway to set up CE 4.1 to force a connection on the modem port? All helps are appreciated. Cheers Weili Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58638
  - 17
    - error in oemioctl.c for standard x86 platform (PB 4.2) I am using the standard x86 based BSP and i am getting this error on oemioctl.c I cannot trace anything relating to this, anyone has any ideas what this could be related to. Hardware platform I am using is EPIA x86 based. Thanks in advance for your replies. c:\wince420\platform\viacepc\kernel\hal\.\oemioctl.c(1200) : error C2196: case value '16859236' already used c:\wince420\platform\viacepc\kernel\hal\link() : error LNK1181: cannot open input file 'obj\x86\retail\oemioctl.obj' NMAKE : U1073: don't know how to make 'C:\WINCE420\platform\VIACEPC\lib\x86\retail\hal.lib' NMAKE : U1073: don't know how to make 'C:\WINCE420\platform\VIACEPC\lib\x86\retail\hal.lib' NMAKE : U1073: don't know how to make 'C:\WINCE420\platform\VIACEPC\lib\x86\retail\hal.lib' Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58630
  - 18
    - How do I route standard output to serial port Hello experts, I have a headless device. How do I route stdout messages to serial port (Debug port)? Thanks, Nguyen Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58618
  - 19
    - Link warning in my Device Driver Using PB 4.2 Why Am I getting this error when my device driver (.dll) is linking? MyDriver.dll warning LNK4060: entrypoint '__DllMainCrtStartup' is not __stdcall with 12 bytes of arguments; image may not run LINK : WARNING lnk4096: /base VALUE '0X100000' is invalid for Windows 95 and Windows 98; image may not run. I'm doing a CE device driver. How do I get rid of the above warning message. Do I need a __DllMainCrtStartup entrypoint? The above only happens in release. In debug, I don't get these warning errors. Thanks. John Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58605
  - 20
    - Warning: Unable to do imports from my.exe to Kernel32.dll - will late bind Lets try this post again Using PB 4.2 to compile myapp.exe I'm trying to add some of my applications to the image and I keep getting this warning message, "Warning: Unable to do imports from myapp.exe to KERNEL32.dll - will late bind. The feature that will add my applications will be given to our customers so they can added our applications and driver to their image. I would really like to get rid of this warning so I wouldn't have to explain it to our customers when they build their image. John Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58601
  - 21
    - What's "Native" in "native wireless LAN"? I'm considering the benefits of migrating from 4.1 to 4.2. We have some ethereal desire for supporting wireless LAN. I noticed that 4.1 supports some wireless LAN capability but 4.2 boasts "native" wireless LAN. Can anyone explain what native wireless is? I know very little about wireless networking. Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58597
  - 22
    - "Add Driver" catalog/BSP dependency issue I'm using the PXA27x developer's kit (WinCE 5.0) and have cloned the MainstoneII platform. Using the BSP wizard I've added a NDIS driver for the LAN91C111 Ethernet controller. In the catalog, the driver seems to end up in the right place, i.e. in the cloned BSP under "Device Drivers\Networking\Local Area Networking (LAN) devices\LAN91C111". Inspecting the generated cec-file entries for my added driver, these look (as expected) very similar to the corresponding entries for the global LAN drivers (defined in netcard.cec). I can't e.g. find any added dependencies for my added driver. However, when I add my added driver to my OS design, the driver ends up with a red cross in the driver list, indicating that it will not be included in my build. When inspecting why my driver is excluded I'm told to add any of the following features; - USB Flash Config Tool - RNDIS client - Wireless LAN (802.11) STA - Automatic Configuration and 802.1x - USB Remote NDIS class driver If I include one of the global LAN drivers instead, e.g. RealTek RTL8139, I get no dependency errors (i.e. no red cross). Since the cec-dependencies look the same, why am I getting these dependencies for my own added BSP driver when I don't get them for a global driver ? Where can I find (and change) these dependencies when adding my driver to the BSP ? Regards, Leif O -- Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/ Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58595
  - 23
    - CE image for Freescale i.MX1 doesn't run user apps We produced a CE.NET 4.2 image for the Freescale MC9328MX1ADS/B board platform, using the "Mobile Handheld" profile of Platform Builder. The image ran on the board and we could also run built-in CE applications like file viewers, etc. Then we loaded our own "Hello World" app compiled with eVC++, but it didn't run. Neither did it crash! There was no response at all when we clicked the icon of this application. And the debugger also didn't function. But when we use a pre-compiled CE image provided by Freescale, the same application runs. What is wrong with our CE image??? Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58590
  - 24
    - Direct 3D at half speed Hi, I have 2 platforms (CE 4.2) that run on the same hardware with the same Direct 3D video driver. Both are release kernels. On one platform I get about 20 fps on the other one I barely get 10 fps with the exact same 3D app. Anybody has a clue where this could be coming from ? Thanx! Mike Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58589
  - 25
    - Desktop PC mainboard for Windows CE .NET 4.2 Hi all, I was asked if desktop PC mainboards are eligible to use with Windows CE .NET 4.2 . I made a quick research at www.microsoft.embeddedoem.com about the supported processors and drivers and BSPs. So far as I understand if a board has one of the supported processors and there are drivers for certain chipsets on it (such as audio, video, LAN/WAN, serial, parallel, USB ports, etc.) , I can use that board with Windows CE .NET 4.2. However I will probably not get a bsp support since the configurations may vary or the oem manufacturer may not support embedded operating systems on driver basis. I will accept opinions about this subject. Any experiences or recommendations are also welcome. Thanks in advance, -- Selin Metin selinm_at_esit_dot_com_dot_tr Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58588
- Next
  - 1
    - Kernel Tracker / CeLog issues Hi All, I have an issue which I've been looking for a solution for a couple of days (CE .NET 4.2). The problem is that Remote Kernel Tracker displays the following when I connect to our device (Kitl stream): "Remote Kernel Tracker detected invalid timestamps on some data while reading from the file or connection stream. Remote Kernel Tracker has corrected the timestamps to the best of its ability. Would you like to continue data collection?" It manages to get a few samples but these all seem to occur at the same time-instance. I've installed a patch from Microsoft which should fix a similar problem (Timestamp error in Remote Kernel Tracker KB826381), but it made no difference. There also seems to be a problem with the CeLog (I've tried to compile it and managed to get something out of it (.lib's) but it's seemed to make no difference either). I've tried to build the OS with different settings (such as "Flush Events To Release Directory", "Enable Profiling" etc.) but I get no output file called celog.clg in my release directory and I cannot connect using Remote Kernel Tracker. "CeLogFlush.exe" is present on the device and in the Registry/Init but I cannot se it in the active processes after I start. Could there be a problem in CeLog which results in no log/Remote Kernel Tracker not working? Anyone got any ideas on what it could be? What are the CeLog dependencies which could give these errors (Timers or...)? What can I do to test if CeLog is working properly? Best Regards, Henrik Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58586
  - 2
    - Fail to load symbols for ..._SERIAL.DL My OS image startup process is stalled on loading symbols for _SERIAL.DL the latest messages from debug output window are: ======================================================================================================== 4294773656 PID:23c4948e TID:23c76eb6 0x83c49000: DEVICE!ActivateDeviceEx(Drivers\BuiltIn\Serial) entered 4294773670 PID:23c4948e TID:23c76eb6 0x83c49000: >>> Loading module xsc1bd_serial.dll at address 0x02EC0000-0x02EE4000 (RW data at 0x01F46000-0x01F46608) Loaded symbols for 'D:\MYWORK\LINDA\RELDIR\SITSANGDEBUG\XSC1BD_SERIAL.DLL' ========================================================================================================= The serial driver was cloned from lubbock. the PDD source should be D:\WINCE420\PLATFORM\Sitsang\drivers\SERIAL\XSC1_SER16550\ and ...\SERIAL\XSC1_SerialPdd\ MDD source should be D:\WINCE420\PUBLIC\COMMON\OAK\DRIVERS\SERIAL\COM_MDD and ..\SERIAL\COM_MDD2 Am I right? I am not sure why there are two MDD's ? In the DllEntry of MDD file ((SerialDllEntry() of MDD; DllEntry() of MDD2)) there is a statement: --------------------------------------------- { if ( dwReason == DLL_PROCESS_ATTACH ) { DEBUGREGISTER(hinstDll); DEBUGMSG (ZONE_INIT, (TEXT("serial port process attach\r\n"))); --------------------------------------------- But why I can not see the debug messagae "serial port process attach"; What should winCE do before call into DllEntry? Thanks a lot!! Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58575
  - 3
    - Retail/Debug Hi, my bootloader works fine in retail build, but it is not working in debug build. let me make it clear. if it is a debug build, then the debug output is Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Mar 13 2003 22:52:25 Windows CE Serial Bootloader Version 1.1 System ready! Preparing for download... Sending boot request... Waiting for boot ack... received non-download packet type Sending boot request... Waiting for boot ack... Received boot ack Received boot request ack... starting download received non-download packet type received non-download packet type immediately I get a message like download failed. review your download selection and configuration. but the same, under retail build works perfectly fine. any comments? regards Sujith Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58574
  - 4
    - Building Device Drivers in Platform Builder Hello everybody, Using Platform Builder 5.0, can one develope only device drivers and test it on hardware device without building os design. I just want to build usb device driver and not the os/bsp part. Is it possible to write, debug/test drivers part only. Also what are hardware supported by Platform Builder for testing purpose. Is it possible to write driver dll or an application through "Platform Builder 5.0" that should work on Windows CE 4.2? Thanks in advance Sunny Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58573
  - 5
    - How to enable 13M mode on PXA27x Dear experts, Have you enabled CPU 13M mode on PXA27x? I tryied it by referring to Intel's spec. It seems that the CPU can enter and exit 13M mode. But after several times, the system halts. Could you give me some info or share me the sample code? Thanks! Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58571
  - 6
    - [Q]: Steve & Mike Hi Steve & Mike, With reference to your article [Understanding the File System Architecture in Windows CE .NET]: http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnembedded/html/embedded01012002.asp You said in the above article that you may cover TFAT in the future[!] article. I am not able to find any article on TFAT under columns\GetEmbedded. regards sajid Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58565
  - 7
    - Can't get file server to work Hello, I've created an OS image which contains the following components: - File Server (SYSGEN_SMB_FILE) - File Server Customizable UI (SYSGEN_SMB_UI) - NTLM (SYSGEN_AUTH_NTLM) I also added the following to platform.reg: -----------------> [HKEY_LOCAL_MACHINE\Services\SMBServer] "AdapterList"="PCI\\RTL81391;VMINI1" [HKEY_LOCAL_MACHINE\Services\SMBServer\Shares] "UseAuthentication"=dword:0 [HKEY_LOCAL_MACHINE\Services\SMBServer\Shares\HardDisk] "Type"=dword:0 "Path"="\\Hard Disk" [HKEY_LOCAL_MACHINE\Ident] "Name"="QcomSniffer" "OrigName"="WindowsCE" "Desc"="QCom Network Sniffer Board" <----------------- After downloading this image to my device, i open up IE on my dev PC and type \\qcomsniffer on the address bar, but i get the error: "Windows cannot find "\\qcomsniffer". Check the spelling and try again, or try searching for the item by clicking the Start button and then clicking Search.". I can however ping the device from my dev PC. Am i missing something here? In 4.2, the file server was setup very easily... has there been some major changes made in CE 5.0? Thanks. Michael--J. Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58563
  - 8
    - RDP Problem in CE Hi all, I connect to the TSE(RDP server) with the serial port mapping of RDP 5.1/5.5(CE 4.2 & 5.0) function. But the Serial port applications does not work except the hyperterm. I use a VB application with com port function and it does not work either. Is this a bug of RDP? Thanks. Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58562
  - 9
    - Warning: Unable to do imports from my.exe to Kernel32.dll - will late bind I'm trying to add some of my applications to the image and I keep getting this warning message, "Warning: Unable to do imports from myapp.exe to KERNEL32.dll - will late bind. The feature that will add my applications will be given to our customers so they can added our applications and driver to their image. I would really like to get rid of this warning so I wouldn't have to explain it to our customers when they build their image. John Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58555
  - 10
    - ActiveSync Connection Process Hello - I have a PXA55 based system that I am attempting to get ActiveSync working over the USB Device Controller so that applications can be debugged. We have the usual serial ports and USB device controller onboard the PXA255. On the host PC side I can see the Windows CE Device / Microsoft USB Sync under the Device Manager when I plug in the USB cable. The driver there is as I expect it to be. ActiveSync on the Win CE device side however does not establish a connection. I believe it is because the DeviceType is not properly set somewhere in my registry of the Win CE device. The following are loaded at startup: NDIS, Asyncmac, AFD, TAPI, unimodem, ppp autoras, winsock and the Serial stream driver interface for the USB Device Controller. At the time of the cable plug in I see the following sequence (see attached dump of the KITL debug messages - I enabled all debug zones on the following: Afd, Asyncmac, Autoras, NDIS, PPP, TAPI and Unimodem): 1. The RS232 notify is sent and REPLLOG.EXE gets launched as expected. 2. REPLLOG sees the [HKCU\ControlPanel\Comm] registry entry. 3. REPLLOG spawns the RAPISERV process with the entry it found in #2. For some reason RAPISERV thinks it is to use a DeviceType 2 (which I believe according to unimodem.h is a DT_INTERNAL_MODEM) 4. RAPISERV finds the default entry and calls the Autoras which spawns the RNAAPP process (a dialer, because of the [HKLM\Comm\Autoras] registry entry) with the entry found in #2. 5. RAPISERV tells Autoras to start dialing and waits for a connection from RNAAPP. 6. RNAAPP gets the RasBook entry as defined in #2 and does something with the TAPI / Unimodem and PPP (I imagine attempting to establish a connection). As far as I know the RAS phone book entry does not have an indication of the DeviceType to use. How do I force this to use the USB Function Driver (SA_USB_SER)? Is it the "index" sub-key of the [HKLM\Comm\Autoras] registry entry? That registry entry is actually in the COMMON.REG which is in the PUBLIC/COMMON files so it's generally not a good idea to modify it. That would mean that to use the ActiveSync you pretty much have to use COM1 for the USB Function Driver. Just for testing purposes I modifed the COMMON.REG file to change the "index" sub-key to 5 (since my USB Function Driver is named COM5:). That did not work as I had hoped. Do I have to create my own telephony service provider (TSP) for the TAPI to call for that USB Function Driver (see the "tsp" sub-key) ? Am I on the wrong track? I have the following relevant registry entries on the Win CE device side: [HKEY_CURRENT_USER\Comm\RasBook\Default RAS] "DevCfg"=hex:\ 10,00,00,00,05,00,00,00,00,01,00,00,00,4b,00,00,00,00,08,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00 "Entry"=hex:\ 08,02,40,00,00,00,00,00,00,00,00,00,00,00,e1,01,00,00,00,00,9c,44,36,02,e8,\ ef,03,0e,00,00,00,00,00,00,00,00,08,ee,03,0e,a5,01,00,00,4f,01,00,00,b4,01,\ 00,00,87,00,00,00,cc,cc,00,00,00,00,00,00,00,00,00,00,01,00,00,00,ad,00,00,\ 00,4f,01,00,00,d3,01,00,00,50,01,00,00,88,2a,36,02,70,18,0e,00,30,f0,03,0e,\ 00,00,00,00,00,00,00,00,50,ee,03,0e,48,f4,03,0e,90,f0,03,0e,fd,00,00,00,04,\ 00,00,00,cc,cc,00,00,00,00,00,00,00,00,00,00,01,00,00,00,01,00,00,00,d8,70,\ e1,01,00,00,00,00,00,00,00,00,30,6c,e1,01,00,00,00,00,a0,f0,03,0e,d8,e5,0f,\ 00,30,18,0e,00,00,00,00,00,48,f4,03,0e,68,f4,03,0e,10,44,36,02,00,00,00,00,\ 30,18,0e,00,88,2a,36,02,70,18,0e,00,e8,ef,03,0e,00,00,00,00,00,00,00,00,f8,\ f3,03,0e,01,00,00,00,00,00,00,00,30,18,0e,00,00,00,00,00,30,f0,03,0e,00,00,\ 00,00,00,00,00,00,01,00,00,00,01,00,00,00,00,79,e1,01,d8,e5,0f,00,00,00,00,\ 00,88,2a,36,02,70,18,0e,00,60,17,0b,00,ae,55,9f,d4,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,01,00,00,00,64,00,69,00,72,\ 00,65,00,63,00,74,00,00,00,00,00,89,01,00,00,44,e8,07,00,00,00,00,00,09,00,\ 00,00,00,00,55,00,53,00,42,00,20,00,43,00,61,00,62,00,6c,00,65,00,3a,00,00,\ 00,00,00,00,00,18,00,00,00,0c,00,00,00,0c,aa,21,91,68,b8,9a,94,00,00,00,00,\ 3c,13,36,02,41,00,00,00,41,00,00,00,00,00,00,00,00,00,00,00,9a,04,c9,d4,50,\ f8,ff,01,00,c8,ff,ff,58,63,f7,03,c8,e2,07,00,60,17,0b,00,ae,55,9f,d4,00,00,\ 00,00,f8,ef,03,0e,c8,e2,07,00,c8,e2,07,00,b0,ca,03,00,00,00,00,00,3c,13,36,\ 02,00,00,00,00,00,00,00,00,00,00,00,00,9a,04,c9,d4,c8,e2,07,00,ad,00,00,00,\ 76,00,00,00,0a,00,00,00,91,00,00,00,ad,00,00,00,30,f0,03,0e,3c,13,36,02,ca,\ 13,04,0e,00,00,00,00,02,00,00,00,89,01,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,01,00,00,00,6c,f0,03,0e,ca,13,04,0e,00,00,00,00,60,de,0f,08,0a,00,00,\ 00,bc,78,01,00,ca,13,04,0e,00,00,00,00,00,00,00,00,0a,00,00,00,30,7a,10,00,\ ca,13,04,0e,89,01,00,00,00,00,00,00,00,00,00,00,00,00,00,00,4f,01,00,00,d3,\ 01,00,00,50,01,00,00,d3,01,00,00,4f,01,00,00,ad,00,00,00,4f,01,00,00,d3,01,\ 00,00,50,01,00,00,02,00,00,00,89,01,00,00,60,17,0b,00,ae,55,9f,d4,d4,f0,03,\ 0e,78,54,01,00,60,17,0b,00,0a,00,00,00,60,84,01,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,01,00,00,00,04,f1,03,0e,01,00,00,02,00,00,00,00,ca,13,04,0e,ca,\ 13,04,0e,02,00,00,00,1c,f1,03,0e,b8,97,07,00,30,7a,10,00,89,01,00,00,02,00,\ 00,00,ca,13,04,0e,0d,00,00,00,0d,00,00,00,81,00,00,00,ca,13,04,0e,00,79,10,\ 00,01,00,00,00,60,76,10,00,28,f2,03,0e,40,7a,07,00,00,ce,0f,00,bc,ee,04,00,\ 60,17,0b,00,ae,55,9f,d4,90,81,10,00,20,00,00,00,00,ce,0f,00,00,00,00,00,90,\ 81,10,00,01,00,00,00,00,00,00,00,f4,c5,0e,00,00,00,00,00,a0,f2,03,0e,f4,c5,\ 0e,00,da,1f,a5,d4,50,f8,ff,01,00,c8,ff,ff,40,50,f7,03,81,00,00,00,0d,00,00,\ 00,00,00,00,00,e0,cb,03,00,50,f8,ff,01,00,c8,ff,ff,ca,13,04,0e,60,79,07,00,\ 60,17,0b,00,ae,55,9f,d4,00,00,00,00,c4,f1,03,0e,60,79,07,00,60,79,07,00,b0,\ ca,03,00,d0,f1,03,0e,d4,f1,03,0e,00,00,00,00,00,00,00,00,00,00,00,00,9a,04,\ c9,d4,60,79,07,00,ca,13,04,0e,e0,01,00,00,0a,00,00,00,34,ec,04,00,e0,01,00,\ 00,00,00,00,00,00,00,00,00,ca,13,04,0e,00,00,00,00,81,00,00,00,0d,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,01,00,00,00,38,f2,03,0e,ca,13,04,0e,60,\ 17,0b,00,ae,55,9f,d4,60,17,0b,00,ae,55,9f,d4,44,f2,03,0e,78,54,01,00,60,17,\ 0b,00,80,f2,03,0e,00,00,00,00,00,00,00,0e,6c,86,20,91,0f,00,00,00,00,00,00,\ 00,c4,b3,00,f0,00,00,00,00,64,f4,03,0e,00,c8,ff,ff,00,00,00,00,00,00,00,00,\ 30,0c,04,00,d0,4e,10,00,90,5c,20,91,f1,ec,ff,ff,00,00,00,00,1f,00,00,00,90,\ 0d,00,00,4c,65,f9,03,00,00,00,00 [HKEY_CURRENT_USER\ControlPanel\Comm] "AutoCnct"=dword:00000001 "Cnct"="Default RAS" [HKEY_LOCAL_MACHINE\Comm\AsyncMac] "DisplayName"="AsyncMac NDISWAN Miniport" "Group"="NDIS" "ImagePath"="AsyncMac.dll" [HKEY_LOCAL_MACHINE\Comm\AsyncMac\Linkage] "Route"=hex(7):\ 41,73,79,6e,63,4d,61,63,31,00,00,00,00 [HKEY_LOCAL_MACHINE\Comm\AsyncMac1] "DisplayName"="AsyncMac NDISWAN Miniport" "Group"="NDIS" [HKEY_LOCAL_MACHINE\Comm\AsyncMac1\Parms] "BusNumber"=dword:00000000 "BusType"=dword:00000000 "DisablePowerManagement"=dword:00000001 [HKEY_LOCAL_MACHINE\Comm\Autoras] "Dialer"="rnaapp.exe" "NoPromptOpt"="-p" "RasEntryOpt"="-e" [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\autoras] "Prefix"="ARS" "Dll"="autoras.dll" "Index"=dword:00000001 "Order"=dword:00000004 (I tried changing "index" to 5, with no luck) [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial2] "Tsp"="Unimodem.dll" "Dll"="serial.Dll" "IoBase"=dword:ad800000 "Irq"=dword:00000015 "IoLen"=dword:00000024 "DeviceArrayIndex"=dword:00000002 "Index"=dword:00000002 "Prefix"="COM" "Order"=dword:00000009 "DeviceType"=dword:00000000 "FriendlyName"="Right Display (HWUART) on COM2:" "DevConfig"=hex:\ 10,00,00,00,05,00,00,00,10,01,00,00,00,4b,00,00,00,00,08,00,00,00,00,00,00 [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial5] "Tsp"="Unimodem.dll" "Dll"="sa_usb_ser.Dll" "IoBase"=dword:ad800000 "Irq"=dword:00000015 "IoLen"=dword:00000024 "DeviceArrayIndex"=dword:00000005 "Index"=dword:00000005 "Prefix"="COM" "Order"=dword:00000009 "DeviceType"=dword:00000000 "FriendlyName"="USB Serial Function (USB) on COM5:" "DevConfig"=hex:\ 10,00,00,00,05,00,00,00,10,01,00,00,00,4b,00,00,00,00,08,00,00,00,00,00,00 [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\TAPI] "Dll"="TAPI.dll" "Order"=dword:00000001 [HKEY_LOCAL_MACHINE\Drivers\Unimodem] "DevConfig"=hex:\ 10,00,00,00,78,00,00,00,10,01,00,00,00,4b,00,00,00,00,08,00,00,00,00,00,00 [HKEY_LOCAL_MACHINE\ExtModems\HayesCompat] "Port"="COM1:" "DeviceType"=dword:00000001 "FriendlyName"="Hayes Compatible on COM1:" Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58552
  - 11
    - Cannot import cec into catalog feature PB 4.2 This is a strange problem that I cannot figure out what is causing it. I have two CEC files. One cec file I can import and the catalog updates its features with the new CEC file. The other CEC file I cannot get it to display in the catalog feature. Event refreshing the Catalog features didn't work. Both CEC files are copying files into the $(_FLATRELEASEDIR). I hope somebody has had this similar problem in PB4.2 Below is the content of the CEC files that can be imported. CECInfo ( Name ( "getntds.cec" ) CECVersion ( 4.20 ) Description ( "NTDS Device Driver. Also contains ioctl.dll" ) GUID ( {86CC7D99-ADA3-4331-95B9-02B348DF9F45} ) Vendor ( "GET Engineering Corporation" ) ) ComponentType ( Name ( "GET CE Device Driver" ) GUID ( {23E8AF5D-6466-45DB-A049-D0CEB69B0F50} ) Description ( "Contains the getntds.dll and ntds_io.dll file" ) Vendor ( "GET Engineering" ) MaxResolvedImpsAllowed( 1 ) Implementations ( Implementation ( Name ( "getntds" ) GUID ( {58F74479-7130-45C7-9EDB-A9A055E7BDF4} ) Description ( "The CE Device Driver. Also contains the ioctl module (ntds_io.dll)" ) Version ( "1.0.0.0" ) Locale ( 0409 ) Vendor ( "GET Engineering Corp." ) ImplSize ( 290000 ) Date ( "4/20/2004" ) SizeIsCPUDependent( 1 ) BuildMethods ( BuildMethod ( GUID ( {0A3B2B21-4F9C-4D62-B4F2-E90AC358BF77} ) Step ( PreMakeImg ) CPU ( "x86" ) CoreOS ( "ALL" ) Action ( '#COPY("$(SystemDrive)\GET Engineering\CE NTDS Driver\getntds.dll", "$(_FLATRELEASEDIR)")' ) Action ( '#COPY("$(SystemDrive)\GET Engineering\CE NTDS Driver\ntds_io.dll", "$(_FLATRELEASEDIR)")' ) ) ) BibInfo ( Files ( File ( GUID ( {4CC8C665-0697-46B0-BBBC-23B3C2BED429} ) CPU ( "x86" ) BibRecord ( '#MODULES( "ntds_io.dll", "$(SystemDrive)\GET Engineering\CE NTDS Driver\ntds_io.dll", "NK", "" )' ) BibRecord ( '#MODULES( "getntds.dll", "$(SystemDrive)\GET Engineering\CE NTDS Driver\getntds.dll", "NK", "SH" )' ) ) ) ) ) ) ) BELOW IS THE CEC FILE THAT WILL NOT DISPLAY IN THE CATALOG FEATURE. CECInfo ( CECVersion ( 4.20 ) GUID ( {315039BA-B3F7-4702-B049-487ADB2F15BE} ) ) ComponentType ( Name ( "Ntds Sample Code" ) GUID ( {8FB3F6F4-9549-43BF-9CAD-D0DFD1159D20} ) Description ( "Sample Code for CE NTDS Device Driver" ) Vendor ( "GET Engineering" ) MaxResolvedImpsAllowed( 1 ) Implementations ( Implementation ( Name ( "ins" ) GUID ( {80A18E88-8C89-4852-BA3E-E183F4407196} ) Description ( "Performs Insert Data ioctl function" ) Version ( "1.0.0.0" ) Locale ( 0409 ) Vendor ( "GET Engineering Corp." ) ImplSize ( 44000 ) Date ( "10/20/2004" ) SizeIsCPUDependent( 1 ) BuildMethods ( BuildMethod ( GUID ( {1E177E2B-6D95-494F-BD8A-F1E18C960B3B} ) Step ( PreMakeImg ) CPU ( "x86" ) CoreOS ( "IABASE" ) Action ( '#COPY("c:\GET Engineering\CE NTDS Driver\Sample Code\ins.exe", "$(_FLATRELEASEDIR)")' ) ) ) BibInfo ( Files ( File ( GUID ( {64E9ABD9-0329-4F9D-A923-441130CEFD6C} ) CPU ( "x86" ) BibRecord ( '#MODULES( "ins.exe", "c:\GET Engineering\CE NTDS Driver\Sample Code\ins.exe", "NK", "" )' ) ) ) ) ) Implementation ( Name ( "ext" ) GUID ( {8AC453A6-2377-4ACD-AFD5-E9B6755B76BC} ) Description ( "Extract data sample ioctl command" ) Version ( "1.0.0.0" ) Locale ( 0409 ) Vendor ( "GET Engineering Corp." ) ImplSize ( 44000 ) Date ( "10/20/2004" ) SizeIsCPUDependent( 1 ) BuildMethods ( BuildMethod ( GUID ( {18D84A9F-BA5D-4404-96F3-17DD8680902F} ) Step ( PreMakeImg ) CPU ( "x86" ) CoreOS ( "IABASE" ) Action ( '#COPY("c:\GET Engineering\CE NTDS Driver\Sample Code\ext.exe", "$(_FLASTRELEASEDIR)")' ) ) ) BibInfo ( Files ( File ( GUID ( {5689BD10-7327-4905-91B5-7F69A1BF5C48} ) CPU ( "x86" ) BibRecord ( '#MODULES( "ext.exe", "c:\GET Engineering\CE NTDS Driver\Sample Code\ext.exe", "NK", "" )' ) ) ) ) ) ) ) Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58550
  - 12
    - Request for comment on my stream driver approach I have implemented a stream driver to give access to a sensor on our board. In the driver's init function, I start a thread to periodically average several readings from the sensor and store the average in a variable global to the driver code. Applications access the sensor readings through the read function, which just copies the current sensor average from the global variable to the buffer passed in the call. I use a mutex to protect access to the global variable in the thread code and the read function. Does this sound like a correct way to implement such a driver? Thanks for any comments. -- Frank D. Lombardo Turning Point Technology, Inc. Frank at TurningPointOnline dot com Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58547
  - 13
    - BSP driver migration from 4.2 to 5.0, OSDesignView I am doing a BSP migration from 4.2 to 5.0 evaluation version. As our drivers are thoroughly tested for our purposes we would in many cases like to use them instead of the drivers included in version 5.0. I therefore generated a BSP based on Intel PXA27x and added my drivers to the SRC\DRIVERS directory and updated the dirs file. I then added them to the BSP by using the BSP Wizard's Add Driver functionality. I also modified entries in the platform.bib where applicable. The new BSP looks as expected in the Catalog with all drivers I added present. When I built a new Platform using this new BSP, the only item that shows up in OSDesignView under the BSP is the bootloader. All others are not present. I tried to add them by right clicking onthe item and doing an Add to OS Design, but this only made some of the drivers show up, not all. When I compile the Platform using Build OS -> Sysgen with Clean, Copy Files and Make Run Time Image options set, my drivers compile (although I see they do not get cleaned unless you delete the obj files). I also see them included in the image as dlls in the end of the build. What files do Platform Builder use when setting up the OSDesignView? Is the OSDesignView view I describe expected when adding custom drivers? Is my approach to adding the drivers correct? Regards, Inger Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58541
  - 14
    - How to Debug USB device I want to find out why my usb disk can not be used in my platform, so guess can make it in debug mode. But when I built a debug one, the device did not have response after the usb disk connected. I can not jump to usbd.dll to find out why. Nothing out. Does anyone can give me a hand? thanks. Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58535
  - 15
    - Remote display Hi , Is there a possibility to have a remote display of a Windows CE device that has no display card ? for example is it possible to use a stub display driver (ddi_nop.dll) and activating VNC server on the Windows CE device ? Thanks Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58528
  - 16
    - WinCE 5.0 PAN NAP Hi All, I'm using the following registry for PAN user. [HKEY_LOCAL_MACHINE\Comm\BTPAN1\Parms] "BusNumber"=dword:0 "BusType"=dword:0 "AdapterType"="PANU" "ServiceId"="{00001115-0000-1000-8000-00805f9b34fb}" ; PANU "FriendlyName"="Personal Ad-hoc Network" "Description"="Bluetooth PANU service" "ConnectionTimeout"=dword:7530 ; 30000 "AcceptConnections"=dword:1 "MaxConnections"=dword:10 I want to know the registry settings for PAN network access point. What is the ServiceId for NAP. Thanks Anand Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58526
  - 17
    - Help: extract image from set top box I am trying to connect to a set top box with a CE 4.2 set top box on it using Platform Builder. The image does not allow updates to its registry, so I am trying to pull the image from the box so that I can manipulate it with platform builder. Do I need the original image to do this? If I can just pull the image from the box, how do I do it? Is there a tool, within Platform Builder or otherwise, that I can use to modify the registry on the set top box without rebuilding, etc...? How would I connect? Thanks for your help. ...Mike Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58525
  - 18
    - CE 5.0 .reg file question Hi, I create a .cec component, It is included in the TAB "file view" => project. There is a registry file in the project. But no matter how I build the platform or make image, the PBuserProjects.reg does not contain the registry of my cec. And the reginit.ini does not either. The *.pbpxmls also has the data about RegFile. Is this a problem on CE 5.0 ? Bryan Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58523
  - 19
    - Proxim Orinoco Gold PC Card dirver compatibility I try to use the Orinoco PCMCIA Card on my 4.2 platform (Embedded System based on Samsung 2410). I'm able to load the driver and to see the network Card in the Network Connection, but it seems not capable to connet to the AP (I use a D-Link DWL-700AP, the same Card works fine on a XP-PC). Somebody has used already the Orinoco Card? Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58522
  - 20
    - Several questions to develop driver with eVC Several questions to develop driver with eVC I have read Mike Hall's aticle <<SPOT the Geek and Windows CE Drivers>> in MSDN http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnembedded/html/embedded03042003.asp I think this article is very clear and useful for newbie developer. But I still have several questions: 1. What and how to link the function name in driver and application? For example, when I call CreateFile() in application, how does wince know what to do? How does the function ReadFile() in applicatin map to XXX_Read() in driver? 2. What's more, If I develop a driver with other exported function (Other than XXX_Read() XXX_Write(), such as MyExpFunc() ), what should I do? That is, how to establish the link between exposed driver functions and application functions. 3. Is there any conception of user-space and system-space just like driver in Linux, where we should use copytouser() and copyfromuser() to transfer parameters? 4. In Mike's article, he created source file in PB. But I can create a new dll project in eVC either. What's more, I can build it to a DLL and export the function using eVC. My question is: How to import my registry to make my driver work in wince OS, if I don't edit project.reg. (Is it enough to import the registry? ) I think it's tedious to build the whole image and download it time after time, just after a few change in source. Is there any tool like "regsvr32" in desktop windows? I have googled newsgroups and found that I was overwhelmed by too much irrelative information :( And the help doc about drivers seems not related to eVC. Thanks a lot. Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58518
  - 21
    - Boot CE from hard drive PB 4.2 I got my driver working using CEPC and uploading the image. Now what to create an image and put it on a hard drive so that when the PC boots up, CE is started. How do I do this? Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58506
  - 22
    - How to stop running VoIP phone application ? Hi all, Can anybody let me know a way to stop VoIP application running in the startup. I checked all the registry files and could not find anything related . Can somebody help me ? Thanks sri Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58501
  - 23
    - Serial KITL on XScale Platform problem Has anyone been able to get a serial KITL connection (polled) from an XScale platform to Platform Builder to work with 5.0 yet? I'm still struggling to get this to work. (I've borrowed the CEPC version, but still can't get Platform Builder to connect.) Is there some "trick" that I'm overlooking? Thanks, JMerkle Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58500
  - 24
    - Help persisting registry I'm using 4.2 and am trying to set up the registry so that my application registry changes will be persistant. The program can read/write to the flash 'hard disk' just fine so I know that persistant storage is available. Also, there is a user.hv file in the object store that Windows Explorer can find (with the proper view options set) but the registry settings are not being saved. When the system gets powered down the registry changes are lost. The program calls RegFlushKey(HKEY_CURRENT_USER) at appropriate times. I must admit I am not very gfood at interpreting MS instructions so I'm sure I've overlooked something. Could someone help me with this problem? Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58489
  - 25
    - Reg. No Server Process Associated With File Name boot.bin - Error Hello All, When i start my bootloader, I am able to detect the device id of my board. Now however when i initiate a download from the platfrom builder, the board displays the following error "No Server Process Associated With File Name boot.bin". The board detects the host IP address and the host port number. Please give me some inputs on the error. Also as far as i know we use nk.bin as the OS image in Windows CE. But here the error says about a filename called boot.bin. What is the reason behind this? Thanks in advance Regards Neo Tag: Booting Windows CE.NET 4.2 from 32 MB IDE FLASH DISK Tag: 58487

hi,

i am facing a problem with my 32 MB IDE FLASH DISK. When i attach
FLASH DISK to my IDE Channel and start the PC to boot from the floppy nothing
happenns. but if i remove FLASH DISK and replace it by my HARD DISK and try
the same procedure my OS boots and the NK.BIN is successfully copied.

please help me.

thank you in advance

regards,

vinay s trivedi

Top