how to use BTSCOSND

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - SDK Hi I created an SDK for an image made of an Internet Appliance Design template, with an AT91RM9200EK BSP. The SDK was successfully created and it is listed in the list of available SDKs in VS2005. I tried to create a VC++ Win32 Smart Device Project with this SDK, but on doin so, nothing happens. Not even the automatically generated code thats supposed to come,appears. Did something go wrong in the SDK creation? Is there a way to rectify this problem? Thank you. Toby. Tag: how to use BTSCOSND Tag: 113256
  - 2
    - How to create(link) sdcardlib.lib and sdbus.lib for sdcard driver in WinCE600? Hi: we are moving our BSP from Ce5.00 to Ce6.00. when PB6 comiple the scdcard driver it can't not find the sdcardlib.lib and sdbus.lib. how could i create these 2 libs or link another way? hope anyone can response soon. Thanks and Best Reagrds. vincent tsai Tag: how to use BTSCOSND Tag: 113248
  - 3
    - How to Print only the current Frame? The environment is: WinCE 6.0 + R2, IESample. By default, IESample prints the whole page, but I need to print only contents the current frame of a webpage with multiple frames, how? If that's difficult, how can I print only selections? regards, Hou Tag: how to use BTSCOSND Tag: 113245
  - 4
    - ms_serial driver Hi, I am porting the mainstoneii serial driver to my platform (wince5, pxa270 based on mainstoneii) for FFUART. I enable the interrupt as GetRegister()->Write_IER(bIER | BUL_SERIAL_IER_UUE); When the serial driver load, after it excuted the above function, there is a lot of event message print infinitely. 0x87d5e000: ms2_serial:IsDebugSerialPort(x40100000): BSP_ARGS@x000d0000, dbgSerPhysAddr=x40700000 0x87d5e000: Will Go inside CBulPdd16550::Init() 0x87d5e000: No DMA Support 0x87d5e000: Configuring Pinout 0x87d5e000: Enable FFUART Clock 0x87d5e000: Enable interrupts and UART to take care of rx data without COM_Open(). 0x87d5e000: Postinit - EN Interrupt 0x87d14400: #### EV_CTS changed#### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### 0x87d14400: #### MS_RLSD_ON #### 0x87d14400: #### EV_RLSD changed#### 0x87d14400: #### MS_CTS_ON #### Is there something wrong in my BSP or the hardware itself? Best regards, J Tag: how to use BTSCOSND Tag: 113243
  - 5
    - Memory Map Setting (config.bib and image_cfg.h...) Hello. Anyone who knows about image_cfg.h(inc), config.bib, AddressTable, virtual address, physical address and etc? I can find some articles about each of them, but cant get the whole picture of the system. Memory map setting is very confusing and driving me crazy. Please, help me to know the concept of windows ce memory map. If anyone knows about any article or is willing to explain it, I will really appreciate it! Thanks! From KidsReturn!! -- Engineer (Developing Windows Mobile PDAs) Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200806/1 Tag: how to use BTSCOSND Tag: 113242
  - 6
    - CLICK HERE TO KNOW MORE ABOUT MICROSOFT CLICK HERE TO KNOW MORE ABOUT LATEST IN MICROSOFT http://polticsinfs.blogspot.com/ Tag: how to use BTSCOSND Tag: 113240
  - 7
    - Intel Embedded Graphics Driver We are trying to configure the Intel embedded graphics driver (both IEGD 8.0 or 9.0 BETA) for Windows CE 6.0 and directX mobile. The target resolution is 1200X768 but we have also tested 1024x768 and 800x600. To date we have attempted a variety of static and dynamic video memory configurations. Our gut feeling is we prefer a static memory configuration but at this point a working video driver is first priority. Using D3DMobileDoctor we have confirmed that our target device is running the IEGD driver but the d3dm properties do not meet expectation. Mainly, there are discrepancies between d3dm properties using the default flat driver and IEGD (max simultaneous textures among others). Biggest issue is we are unable to render a d3dm texture with a simple sprite application. Load texture and sprite draw calls do not produce errors, but texture is not rendered to screen. Same application successfully renders texture to screen using x86 emulator and the default flat display driver. The last data point is we are able to render a shaded triangle using drawprimitive and rotate triangle by changing perspective with IEGD. So it seems like all the test results are pointing to a video memory or d3dm texture issue. Probably a memory configuration problem in a .bib or .reg, but we just have not had any success changing the configuration. Also we have run a more complex D3D application on same device in Windows XP (GMA driver) with great results. We think we should see similar performance between IEGD and GMA driver using basic d3dm functionality (in terms of MAX simultaneous textures, frame rate, sprite support)?. Does anyone out there have any experience with this driver and configuring it? Does anyone out there have any experience creating a CEPC with direct-x support I might be able to let my app developers use until I can work out the issues with our target hardware? Thanks in advance to anyone who can offer some advice. Tag: how to use BTSCOSND Tag: 113239
  - 8
    - Migrating BSP from 4.2 to 5.0 ? Dear Friends, I got S3C2410 development kit with Samsung 2410 processor . I have Platform Builder v5.0 and Windows CE v5.0, but the BSP supplied with the kit is for v4.2. I have refer MSDN and internet but couldn't able to find any useful information related to migration. What are the changes required to migrate bsp to 5.0 compatible? Have a Good Day ahead.. Thanks, Ankur. Tag: how to use BTSCOSND Tag: 113238
  - 9
    - Pxa255 to PXA270 porting... Hi all, After working on PXA255 BSP, it is time for me to move to PXA270. I got a board with almost all the peripherals and even gpio connections same as that of my pxa255 board. My pxa255 board is running perfectly with wince 5.0.. Now, the difference between the new board and my old pxa255 board is only processor PXA270. So, i am planning to use the same bsp here too with some changes only on the processor side. Can any one give me a suggestion and main difference that i need to add or make to my existing bsp, so that it will run without any problems on pxa270. I have found the following changes betwen 255 and 270 up to my knowledge, -->Interrupt architectures are different. But still i am planning to use the icip for detecting the interrupt.. Is that ok? or i have to use ichp. --> I left registers memory mapping to be same. since i found the addresses of registers are almost same as that of pxa255 in pxa270. Only thing is, some extra registers are added. Since i am not going to use those, mapping it is useless i think. --> The same case for RTC too. --> Kern, kernkitl, kernprof are linked with oal_cache_pxa250.lib, now i am planning to link it with oal_cache_pxa27x.lib My hardware is yet to come. Have i missed anything, to modify in my existing bsp ? if any one has tried porting 255 bsp to 270.. please help me if i have missed something... All suggestions are welcome... -- Ramesh.c Innovate Sofware Solutions. Bangalore. Tag: how to use BTSCOSND Tag: 113236
  - 10
    - usb legacy support Hi, Why we need to disable usb legacy support??? In some boards without disabling the usb legacy support it works and in some other boards it doesn't and some times it works in wince 5.0 and not in wince 6.0. I have seen the o.s is getting hanged at loading the usb drivers when the usb legacy support is enabled. I would like to know what exactly make to happen this? If anyone know it please share!! Thanks in advance Tag: how to use BTSCOSND Tag: 113228
  - 11
    - Different interfaces for display driver power management? CE6.0 There appears to be three different interfaces available for power managing a display driver: 1. The full power manager interface through IOCTL_POWER_CAPABILITIES, etc. (advertised on driver initialisation through the PMCLASS_DISPLAY GUID) 2. A second quite similar interface, specific to display drivers, implemented through the escape codes SETPOWERMANAGEMENT / GETPOWERMANAGEMENT and 3. The very basic on/off interface which is exposed through GPE::PowerHandler(). Am I right in thinking that if my driver implements full power management (i.e. option 1 above) then I don't need to bother with the other two interfaces? I could obviously implement the other interfaces as wrappers for my full power management interface, but is this just redundant coding and will it ever be called? In fact, which module uses these other interfaces? Thanks, Andrew. Tag: how to use BTSCOSND Tag: 113225
  - 12
    - usb legacy support Hi all, I am using geode lx bsp; in wince 5.0 wince boots up fine without disabling the usb legacy support in the bios, but in wince 6.0 it is hanging. Could anyone tell me how to disable the usb legacy support?? If i disable the usb legacy support in the bios then the o.s boots up fine otherwise it is hanging in the middle. please help!! I wanted to disable the usb legacy support in the o.s level not in the bios chipset: cs5536 wince 6.0 Thanks in advance. Tag: how to use BTSCOSND Tag: 113221
  - 13
    - OID_PNP_ADD_WAKE_UP_PATTERN Hi, I am using smsc9118 nic driver for my pxa270,wince 5.0 device.i am writing an application to set a wake up pattern for arp and code is as follows.The problem is that i am not able to get the correct masksize,patternoffset,patternsize,..etc in the ethernet driver.i am always getting the error. A device attached to the system is not functioning. ERROR_GEN_FAILURE .One thing i noted is that while loading my ethernet driver it is getting some pattern and coming to OID_PNP_ADD_WAKE_UP_PATTERN. can you please help me . void ByteMask(DWORD,BYTE*); UCHAR SetBuffer[sizeof(NDISUIO_SET_OID)+sizeof(DWORD)]; typedef struct _WAKEUP_FRAME { NDIS_PM_PACKET_PATTERN PmPattern; BYTE Byte_mask[6]; DWORD dwPattern[24]; }WAKEUP_FRAME; WAKEUP_FRAME WakeFrame= { {0x0,0x0,0x6,0x1E,0x15,0x0}, {0,2,03,0,0,0}, {0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x08,0x06,0x0,0x00,0x00,0x00,0x00,0x00,0x00,0x01} pSetOid = (PNDISUIO_SET_OID)&SetBuffer[0]; pSetOid->Oid = OID_PNP_ADD_WAKE_UP_PATTERN; // Custom OID; pSetOid->ptcDeviceName = DeviceName; // You dont need this once you *((ULONG *)(pSetOid->Data)) = (ULONG)&WakeFrame; RETAILMSG(1,(TEXT("Wake Frame Adress=%X \r\n"),&WakeFrame)); hNdis = CreateFile(NDISUIO_DEVICE_NAME, GENERIC_READ | GENERIC_WRITE, FILE_SHARE_READ | FILE_SHARE_WRITE, NULL, OPEN_ALWAYS, 0, NULL); bResult = DeviceIoControl (hNdis, IOCTL_NDISUIO_SET_OID_VALUE, (LPVOID) pSetOid, sizeof(NDISUIO_SET_OID) + sizeof(WAKEUP_FRAME), NULL, 0, &dwBytesReturned, NULL); dwErr=GetLastError(); if (bResult == FALSE) { RETAILMSG(1,(TEXT("Failed to set Wake up Frame for ARP, Error Code=%X \r\n"),dwErr)); } Tag: how to use BTSCOSND Tag: 113220
  - 14
    - Video processing Hi, Can anyone please give me any direction concerning the following? I have a video front-end on my platform (TVP5150) that produces normally YUV parallel data. Because I also need the video lines that are outside the visible frame (teletext data), I have to switch to raw video data to have it all. Both the iMX27 (multimedia arm) and TVP5150 do support RAW video. Normally the process syncs on the YUV data (SAV, EAV markers in the record), but in RAW mode I guess I need the external horizontal and vertical sync? Do you have any experience with this, or any hints to get it up and running? -- Maarten Tag: how to use BTSCOSND Tag: 113211
  - 15
    - OMAP3, WinCE Hi, I want to use winCE6.0 to bring up OMAP3430 hardware. Does WinCE6.0 support ARM cortex ? If not, say if we go for porting the same WHich version of ARM bsp I should consider from WinCE6.0 ? Please suggest the same. Regards ---Visalakshmi.S. 0091 9945278740 Tag: how to use BTSCOSND Tag: 113209
  - 16
    - FREE Tutorials on HTML XHTML CSS JavaScript XML XSL ASP SQL ADO access all computer tutorials for free visit http://freecomputertutorialz1.blogspot.com/ Tag: how to use BTSCOSND Tag: 113207
  - 17
    - FREE Tutorials on HTML XHTML CSS JavaScript XML XSL ASP SQL ADO access all computer tutorials for free visit http://freecomputertutorialz1.blogspot.com/ Tag: how to use BTSCOSND Tag: 113206
  - 18
    - Bus Trace utility for SD HOST of PDA Hi, I want to debug our SD client drivers with the SD Host of PDA. For the Platform builder lke tools, we can simply enable the debug messages from 'CEDebugZones'. But for the mobile environment, I do not know, how to enable that debug messages. From my knowledge, the drivers in PDA is on retail version. Is there any tool/utility to capture the communication between PDA SD host and SD devices in terms of command and response? Please let me know. Best Regards, Tag: how to use BTSCOSND Tag: 113204
  - 19
    - how to use Disk Cache Manager Functions ? hi i want to write an apps that can be write and read very fast in mSD or NAND Flash device. When I use the ReadFile/WriteFile api in WINCE6.0, i found the speed is very slow, even slower than CopyFileEx() API, does anyone know how the api copy file so fast? and I found a Disk Cache Manager Functions, but i don't know how to use it at all, can't find any sample. need your help. Thanks, Jay Tag: how to use BTSCOSND Tag: 113198
  - 20
    - Wince address space allocation Dear all, I am working on a ARM9 platform that has WINCE 5 ported onit. I want to use some cached memory space in user application. The normal malloc is allocating the address at 0x004ea14c, but when i saw the virtual address space mapping in OEMAddressTable, it shows that cached memory space lies between 0x80000000-0x9FFFFFFF. Hence I am trying to use virtual alloc to allocate some memory from that address space, I am not able to allocate at that location. When I verify the address returned by virtualalloc, it remains the same as returned by normal malloc. I am not able to understand the difference in here between 1) malloc and virtual alloc, and also 2) cached memory space reserved in kernel space and userspace memorymap where does it points to. Or am I missing some thing in here. I am using the virtual alloc as follows. unsigned int* tempPtr; tempPtr = (unsigned int*)VirtualAlloc((LPVOID) 0x80000000, 2468, MEM_RESERVE, PAGE_READWRITE); I also tried with other (MEM_RESERVE || MEM_TOP_DOWN). Can any one please letme know if something is wrong in my approach. Regards Deepu Tag: how to use BTSCOSND Tag: 113197
  - 21
    - USB : Where's my Control Pipe ? Hi, I wrote an USB driver based on the PRN sample. 2 interfaces are reported. I got 2 Pipes from the 2nd interface with 2 endpoints (Bulk-in & bulk-out). Another interface was reported having 1 endpoint, but I was told this is the interrupt-pipe. I now need to set DTR, by using a control command. I tried using lpIssueControlTransfer() on my BULK-OUT pipe, but that doesn't work. Where/How should I get my CONTROL-PIPE ? From what I understand, this is some kind of default. ("endpoint 0") Where do I find this endpoint 0 ? , (not beeing one of my bulk pipe's) when found should I just create another PIPE from it myself ? Greetings, Rob. Tag: how to use BTSCOSND Tag: 113189
  - 22
    - Sleep and Resume Test application Hello. I am trying to make a simple test application that makes a WM device sleep and resume continuously. I made a routine for sleep with the API, SetSystemPowerState, but I can't find the API for wakeup in several hunders seconds after sleep. Plz, give me a even little tip of how to make it. Thanks! -- Engineer (Developing Windows Mobile PDAs) Message posted via http://www.pocketpcjunkies.com Tag: how to use BTSCOSND Tag: 113183
  - 23
    - In which type of registry is a value stored? I am using the hive-based registry. As you know this type of registry is made up two registrys (ROM portion and a file based portion) which are linked together. At the moment I am working on an Registry Editor. I would like to know if there is a API call to get the location in wich the registry value is stored (ROM portion or the file based portion of the hive-based registry). Any API call available? Regards Peter Tag: how to use BTSCOSND Tag: 113182
  - 24
    - Driver load order Hello, I need to write a small helper driver. It will provide a kind of mailbox for some data, that should be written from any other device driver, file system driver or application. Since other drivers are loaded quite early I want to load the helper driver as early as possible. The interface to the driver could be i.e. a stream driver or any other interface. The helper driver will only use the coredll. AFAIK file system drivers are loaded before stream drivers. Is this generally true? How can I determine the load order and how can I configure the system to load my helper driver as early as possible? Regards, Helge -- Time is an ocean but it ends at the shore. Tag: how to use BTSCOSND Tag: 113181
  - 25
    - Use of CryptoMemory Hi All I am trying to use CryptoMemory from Atmel with S3C2440A and Wince 5.0. But the I2C bus does not seem to be working. I think the reason is RD/WR bit in command byte. The question is "How can I control RD/WR bit in S3C2440A?" Thanks in advance for any help. Thanks -- Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200806/1 Tag: how to use BTSCOSND Tag: 113177
- Next
  - 1
    - FTP server on WinCe 5 hello, is available an FTP server for windows ce that support XMD5 command ? thanks stefano Magni Tag: how to use BTSCOSND Tag: 113175
  - 2
    - The behavior of CD/DVD ROM in WinCE600 I modified an ATA driver to an ATAPI driver as below: The old ATA driver only support one IDE hard disk on the board. 1) Add AtapiIoctl() to process CD/DVD IOCTL which is similar to \WINCE600\PUBLIC\COMMON\OAK\DRIVERS\BLOCK\ATAPI\atapipcicd.cpp; 2) Modified "HDProfile"="HDProfile" to "CDProfile"="CDProfile" under [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\ATA] in platform.reg; 3) Add Core OS->CEBASE->File systems and Data Store->Storage Manager- >CD/UDFS File System. Now only connect one IDE CD/DVD ROM on the board (no hard disk), the ATAPI driver can detect and read data from IDE CD/DVD ROM. The "CDROM Drive" folder is shown in the WinCE explorer. But there are no "Eject" option in the "File" menu of explorer, after press button on CD/DVD ROM to eject the CD, the "CDROM Drive" folder disappeared. Also when put an Audio CD(i.e. cda file), the media player can not play the whole CD like an Audio CD, it need click on each cda file to play just like a data CD. So the behavior of CD/DVD ROM in WinCE600 looks like a removable disk, not like the CD/DVD ROM in the PC? Is it right or is there any mistake in my modification? The CD/DVD ROM is SAMSUNG DVD-ROM DRIVE SH-D162D(TS-H352D). Thanks for any guidance. Tag: how to use BTSCOSND Tag: 113173
  - 3
    - PCIBUS.dll is getting detached Dear All, Using WINCE5.0 on ARM9, Trying to bring up PCI interface on our board. I have connected a RTL8139 card to the PCI bus Slot 0 My PCIBUS.dll is not loading the RTL8139.dll. Iam not doing any initialization WRT to PCI in bootloader. PCIBUS.DLL is properly reading RTL8139 configspace but not loading RTL8139.dll. Below is the WINCE DUMP ***************************************************************************= =AD ************************************************* Booting Windows CE version 5.00 for (ARM) &pTOC =3D 88073074, pTOC =3D 884533d0, pTOC->ulRamFree =3D 88673000, MemForPT =3D 00000000 Old or invalid version stamp in kernel structures - starting clean! Configuring: Primary pages: 5114, Secondary pages: 0, Filesystem pages =3D 2557 Booting kernel with clean memory configuration: Memory Sections: [0] : start: 88674000, extension: 00002000, length: 013fa000 Sp=3Dffffc7cc ARMInit done. Windows CE KernelInit Updated eptr->e32_vsize to =3D 000a9000 Scheduling the first thread. 0x89a6f024: KernelInit2: pCurThread=3D89a6f024 hCurThread=3D09a6f266 hCurProc=3D09a6f002, KernelInit =3D 88095a78 0x89a6f024: Detecting VFP...0x89a6f024: VFP Not Found! 0x89a6f024: Updated eptr->e32_vsize to =3D 00006000 0x89a6f024: Updated eptr->e32_vsize to =3D 00029000 +IOCTL_HAL_GET_DEVICE_INFO + SPI_GETOEMINFO +IOCTL_HAL_GET_DEVICE_INFO +SPI_GETPLATFORMTYPE +IOCTL_HAL_GET_DEVICE_INFO + 0x89a6f024: Updated eptr->e32_vsize to =3D 00009000 0x89a6f024: Updated eptr->e32_vsize to =3D 00022000 0x89a6f024: ERROR: c:\macallan\private\winceos\coreos\nk\kernel \kwin32.c line 777: 0x89a6f024: ConnectDebugger failed 0x89a6f024: Updated eptr->e32_vsize to =3D 00005000 0x89a6f024: CeLog: +Init 0x89a6f024: CeLog: Large buffer size unspecified, using default size 0x89a6f024: CeLog: Small buffer size invalid or unspecified, using default size 0x89a6f024: CeLog: -Init 0x89a6f024: CeLog Zones : CE =3D 0xCFBFFFFF, User =3D 0xCFBFFFFF, Proc =3D 0xFFFFFFFF 0x89a6f024: New CeLog DLL is now live! (1 total) 0x89a6f024: first =3D 01fb0000, last =3D 02000000, SharedDllBase =3D 03b30000 +IOCTL_HAL_POSTINIT 0x89a3bcc0: CertMod.dll not found, using old OEM Trust Model 0x89a3bcc0: FileSystem Starting - starting with clean file system +IOCTL_HAL_INIT_RTC 0x89a3bcc0: FS: initializing ROM/RAM file system 0x89a3bcc0: SC_CreateAPIHandle: pvData =3D=3D NULL 0x89a3bcc0: FS: Registering file system ROM, index 2, flags 0x00000031 0x89a3bcc0: FS: Mount complete (ROM, index 2, flags 0x00000031) 0x89a3bcc0: Succeeded on CheckFile 0x89a3bcc0: RestoreFile(0x09a26cd2) called fDelete =3D TRUE 0x89a3bcc0: FS: Registering file system StoreMgr, index 3, flags 0x00000001 0x89a3bcc0: FSREG: Unable to read value "NoDefaultUser" under HKEY_LOCAL_MACHINE\init\BootVars 0x89a3bcc0: FSREG: Logging in default user. 0x89a3bcc0: FSREG: Unable to read value "DefaultUser" under HKEY_LOCAL_MACHINE\init\BootVars 0x89a3bcc0: SetCurrentUser: Logging out (nobody), logging in default 0x89a3bcc0: BuildPath: Documents and Settings 0x89a3bcc0: BuildPath: Documents and Settings\default 0x89a3bcc0: SetCurrentUser: User hives not supported -- using same registry for all users 0x89a3bcc0: FSREG: Unable to read value "DBFlags" under HKEY_LOCAL_MACHINE\init\BootVars 0x89a3bcc0: Initializing Database 0x89a3bcc0: DB:Validation: Name already exists DB_notify_events 0x89a3bcc0: DB:CeCreateDatabase failed 0x89a3bcc0: Filesystem initialized! 0x89a3bcc0: FILESYS: Waiting for kernel to be ready to launch apps 0x89a3b640: InitMUI: DISABLED (-1039729896) 0x89a3bcc0: FS: Creating signal event SYSTEM/DevMgrApiSetReady 0x89a3bcc0: FILESYS: Launching apps 0x89a3bcc0: FILESYS: Launching device.exe 0x89a1f8a0: *** DLL_PROCESS_ATTACH - Current Process: 0x42, ID: 0x9a1fb06 *** 0x89a1f8a0: +InitDeviceFileSystems 0x89a1f8a0: FS: Registering file system $device, index 4, flags 0x00000001 0x89a1f8a0: FS: Registering file system $bus, index 5, flags 0x00000001 0x89a1f8a0: -InitDeviceFileSystems: status is 1 0x89a1f8a0: Ceddk!CalibrateStallCounter: Enter 0x89a1f8a0: DEVICE!DevloadInit 0x89a1f8a0: DEVICE!InitDevices: Root Key is Drivers\BuiltIn. 0x89a1f8a0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers \BuiltIn\Prefix) returned 2 0x89a1f8a0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers \BuiltIn\BusPrefix) returned 2 0x89a1f8a0: CardBus.DLL DLL_PROCESS_ATTACH 0x89a1f8a0: BusEnum::BusEnum (ActivateRegPath=3DDrivers\Active \4294967280) 0x89a1f8a0: +AssignChildDriver!!! 0x89a1f8a0: -AssignChildDriver!!! 0x89a1f8a0: !!!Open 0x89a1f8a0: !!!Open Success 0x89a1f8a0: IOControl!!! 0x89a1f8a0: +PostInit!!! 0x89a1f8a0: +ActivateAllChildDrivers!!! 0x89a1f8a0: ActivateChild: Template reg path is Drivers\BuiltIn\NDIS 0x89a1f8a0: ActivateChild: Template reg path is Drivers\BuiltIn\AFD 0x89a1f8a0: ActivateChild: Template reg path is Drivers\BuiltIn\PCI 0x89a1f8a0: BusEnum::ActivateChild load device driver at order 0 0x89a1f8a0: BusEnum::ActivateChild load device driver at order 2 0x89a1f8a0: DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Drivers\BuiltIn\AFD). Dr iver cannot be unloaded. 0x89a1f8a0: CXPORT:dllentry ProcessAttach 0x89a1f8a0: CXPORT:+GetRegSettings 0x89a1f8a0: CXPORT:-GetRegSettings 0x89a1f8a0: CXPORT:InitBlockPool - Pool(16), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(32), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(48), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(64), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(96), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(128), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(256), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(356), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(476), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(512), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(1024), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(1600), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(2048), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(4096), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(8192), limit 20000 bytes 0x89a1f8a0: CXPORT:InitBlockPool - Pool(-1), limit 20000 bytes 0x89a1f8a0: Can't load library ppp.dll 0x89a1f8a0: !AFD:AfdInitialize: Can't open Registry key Comm\AFD -- creating 'Stacks' entry 0x89a1f8a0: NDIS: RebindAdaptersOnResume =3D 0 0x89a1f8a0: NDIS: PcmciaNeedsMapToScrap =3D 0 0x89a1f8a0: TCPIP: dllentry() 0x89a1f8a0: TCPIP.Register() 0x89a1f8a0: *** New TcpStack *** 0x89a1f8a0: +IPInit() 0x89a1f8a0: +IPGetConfig 0x89a1f8a0: -IPGetConfig: Ret: 0x706B0 0x89a1f8a0: Dhcp: dllentry() -1986273776 0x89a1f8a0: +DhcpRegister: 0x89a1f8a0: -DhcpRegister: Ret =3D 35270 0x89a1f8a0: IPInit: registered w/ DHCP 0x89a1f8a0: IPInit: Unable to Load IPSEC 0x89a1f8a0: IGMPDelInclList: AddrPtr=3D710e0 NumDelSources=3D0 DelSourceList=3D0 0x89a1f8a0: -IPInit [SUCCESS] 0x89a1f8a0: +TCPGetConfigInfo 0x89a1f8a0: -TCPGetConfigInfo 0x89a1f8a0: DEVICE!RegReadActivationValues RegQueryValueEx(TCPIP \IPDevice\BusPrefix) returned 2 0x89a1f8a0: +IPD_Init(602deb0) 0x89a1f8a0: DEVICE!RegReadActivationValues RegQueryValueEx(TCPIP \TCPDevice\BusPrefix) returned 2 0x89a1f8a0: +TCP_Init(602deb0) 0x89a1f8a0: TCPIP.About to register 0x89a1f8a0: !AFD: Unable to load library 'tcpip6.dll' 0x89a1f8a0: !AFD: Unable to load library 'irdastk.dll' 0x89a1f8a0: !AFD: Unable to load library 'btd.dll' 0x89a1f8a0: !AFD: Unable to load library 'Redir.dll' 0x89a1f8a0: !AFD: Unable to load library 'IPNat.dll' 0x89a1f8a0: Ws2Instl dllentry() -1986396552 0x89a1f8a0: Ws2Instl:IsStackInstalled - LoadLibrary(irdastk) failed 126 0x89a1f8a0: Ws2Instl:IsStackInstalled - LoadLibrary(btd) failed 126 0x89a1f8a0: Ws2Instl:IsStackInstalled - LoadLibrary(tcpip6) failed 126 0x89a1f8a0: !AFD: Unable to load library 'DhcpV6L.dll' 0x89a1f8a0: *TCPIP:ReadyToGo 0x89a1f8a0: +ARPInit() 0x89a1f8a0: -ARPInit [0] 0x89a1f8a0: !AFD: Unable to load library 'tcpip6.dll' 0x89a1f8a0: !AFD: Unable to load library 'irdastk.dll' 0x89a1f8a0: !AFD: Unable to load library 'btd.dll' 0x89a1f8a0: !AFD: Unable to GetProcAddress of ReadyToGo in 'Netbios' 0x89a1f8a0: !AFD: Unable to load library 'Redir.dll' 0x89a1f8a0: !AFD: Unable to GetProcAddress of ReadyToGo in 'Dhcp' 0x89a1f8a0: !AFD: Unable to load library 'IPNat.dll' 0x89a1f8a0: !AFD: Unable to GetProcAddress of ReadyToGo in 'Ws2Instl' 0x89a1f8a0: !AFD: Unable to load library 'DhcpV6L.dll' 0x89a1f8a0: AFD: Initialization Complete 0x89a1f8a0: BusEnum::ActivateChild load device driver at order 4 0x89a1f8a0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers \BuiltIn\NDIS\BusPrefix) returned 2 0x89a1f8a0: NDIS:: CE_DeleteBusFriendlyNames() failed deleting [HKLM \Comm\BusFriendlyNames] 0x89a1f8a0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers \BuiltIn\PCI\Prefix) returned 2 0x89a1f8a0: DEVICE!RegReadActivationValues RegQueryValueEx(Drivers \BuiltIn\PCI\BusPrefix) returned 2 0x89a1f8a0: PCIBUS!DllMain: process attach 0x89a1f8a0: PCIBUS!PCICfg+(Drivers\BuiltIn\PCI, BusNumberBase 0x0, BusNumberLength 0x1 MemBase 0xB0000000, Mem Len 0x4000000, IoBase 0x80000000, IoLen 0x4000000) 0x89a1f8a0: PCIBUS!PCICfg(Drivers\BuiltIn\PCI, PrefetchMemBase 0x90000000, PrefetchMemLen 0x8000000) 0x89a1f8a0: PCIBUS!PCICfgBus+(Bus 0) 0x89a1f8a0: PCIBUS!PCICfgDevice+(Bus 0, Device 0, Function 0, Vendor ID 0x10EC, Device ID 0x8139) 0x89a1f8a0: PCIBUS!RegMatch+(Drivers\BuiltIn\PCI\Instance, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatch RegOpenKeyEx(Drivers\BuiltIn\PCI \Instance) returned 2. 0x89a1f8a0: PCIBUS!RegMatch+(Drivers\BuiltIn\PCI\Template, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatch 1 devices to search 0x89a1f8a0: PCIBUS!RegMatch RegEnum =3D 0 0x89a1f8a0: PCIBUS!RegMatchOne+(Drivers\BuiltIn\PCI\Template, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatchOne Checking key Drivers\BuiltIn\PCI \Template\MYNIC. 0x89a1f8a0: PCIBUS!RegMatchOne Match for Class (0x2) found. 0x89a1f8a0: PCIBUS!RegMatchOne Match for SubClass (0x0) found. 0x89a1f8a0: PCIBUS!RegMatchOne Match for ProgIF (0x0) found. 0x89a1f8a0: PCIBUS!RegMatchOne: Match for VendorID (0x10EC), DeviceID (0x8139) found. 0x89a1f8a0: PCIBUS!PCICfgFindMatch: Matched device 0/0/0 with registry key 'Drivers\BuiltIn\PCI\Template\MYNIC ' 0x89a1f8a0: PCIBUS!PCICfgCheckBARs+(Bus 0, Device 0, Function 0) 0x89a1f8a0: PCIBUS!PCICfgCheckBars: BAR(0/0/0): Offset 0x10, Type I/ O, Size 0x100 0x89a1f8a0: PCIBUS!PCICfgCheckBars: BAR(0/0/0): Offset 0x14, Type Memory, Size 0x100 +IOCTL_HAL_REQUEST_IRQ 0x89a1f8a0: PCI OEMGetInterrupt: Irq 0 0x89a1f8a0: RequestIrq(0/0/0) returns 0 0x89a1f8a0: HalSetBusDataByOffset. 0x89a1f8a0: HalSetBusDataByOffset. 0x89a1f8a0: HalGetBusDataByOffset. 0x89a1f8a0: HalSetBusDataByOffset. 0x89a1f8a0: PCIBUS!PCICfgDevice- 0x89a1f8a0: PCIBUS!PCICfgBus-(Bus 0, SubBus 0, MemSize 0x100, IoSize 0x100, PrefetchMemSize=3D0x0) 0x89a1f8a0: Mem List: 0x89a1f8a0: DEVICE: Bus/Device/Function 0/0/0, Offset 0x14, Base 0x0, Size 0x100, 0x89a1f8a0: I/O List: 0x89a1f8a0: DEVICE: Bus/Device/Function 0/0/0, Offset 0x10, Base 0x0, Size 0x100, 0x89a1f8a0: Prefetch Mem List: 0x89a1f8a0: PCIBUS!PCICfgAllocateMemSpace+(Bus 0, Base 0xB0000000, Size 0x4000000) 0x89a1f8a0: PCIBUS!PCICfgAllocMemSpace (Device): Bus 0, Device 0, Function 0, Offset 0x14, MemBase 0xB0000000, MemSize 0x100 0x89a1f8a0: HalSetBusDataByOffset. 0x89a1f8a0: HalGetBusDataByOffset. 0x89a1f8a0: HalSetBusDataByOffset. 0x89a1f8a0: PCIBUS!PCICfgAllocateMemSpace-(Bus 0) 0x89a1f8a0: PCIBUS!PCICfgAllocateIoSpace+(Bus 0, Base 0x80000000, Size 0x4000000) 0x89a1f8a0: PCIBUS!PciIinitAllocIoSpace (Device): Bus 0, Device 0, Function 0, Offset 0x10, IoBase 0x80000000, IoSize 0x100 0x89a1f8a0: HalSetBusDataByOffset. 0x89a1f8a0: HalGetBusDataByOffset. 0x89a1f8a0: HalSetBusDataByOffset. +0x89a1f8a0: PCIBUS!PCICfgAllocateIoSpace-(Bus 0) 0x89a1f8a0: PCIBUS!PCICfgAllocatePrefetchMemSpace+(Bus 0, Base 0x90000000, Size 0x8000000) 0x89a1f8a0: PCIBUS!PCICfgAllocateMemSpace-(Bus 0) 0x89a1f8a0: PCIBUS!PCICfg- 0x89a1f8a0: PCIBUS!PCIRegClean(Drivers\BuiltIn\PCI\Instance) 0x89a1f8a0: PCIBUS!PCIRegClean RegOpenKeyEx(Drivers\BuiltIn\PCI \Instance) returned 2. 0x89a1f8a0: PCIBUS!PCIEnum(Drivers\BuiltIn\PCI), Boot phase 1 0x89a1f8a0: HalGetBusDataByOffset. 0x89a1f8a0: PCIBUS!PCIGetBARs+(Bus 0, Device 0, Function 0) 0x89a1f8a0: PCIBUS!RegMatch+(Drivers\BuiltIn\PCI\Instance, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatch RegOpenKeyEx(Drivers\BuiltIn\PCI \Instance) returned 2. 0x89a1f8a0: PCIBUS!RegMatch+(Drivers\BuiltIn\PCI\Template, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatch 1 devices to search 0x89a1f8a0: PCIBUS!RegMatch RegEnum =3D 0 0x89a1f8a0: PCIBUS!RegMatchOne+(Drivers\BuiltIn\PCI\Template, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatchOne Checking key Drivers\BuiltIn\PCI \Template\MYNIC. 0x89a1f8a0: PCIBUS!RegMatchOne Match for Class (0x2) found. 0x89a1f8a0: PCIBUS!RegMatchOne Match for SubClass (0x0) found. 0x89a1f8a0: PCIBUS!RegMatchOne Match for ProgIF (0x0) found. 0x89a1f8a0: PCIBUS!RegMatchOne: Match for VendorID (0x10EC), DeviceID (0x8139) found. 0x89a1f8a0: PCIBUS!PCICfgFindMatch: Matched device 0/0/0 with registry key 'Drivers\BuiltIn\PCI\Template\MYNIC ' 0x89a1f8a0: PCIBUS!PCIReadBARs+(Bus 0, Device 0, Function 0) 0x89a1f8a0: PCIBUS!PCIReadBARs- 0x89a1f8a0: PCIBUS!PCIGetBARs- 0x89a1f8a0: PCIBUS!PCIInitDevice+(Bus 0, Device 0, Function 0) 0x89a1f8a0: PCIBUS!PCIRequestResources: I/O Resource Manager request for I/O range 0x80000000-0x800000FF 0x89a1f8a0: PCIBUS! Retrieve IRQ: 0x89a1f8a0: PCIBUS!PCIReg+(Drivers\BuiltIn\PCI, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatch+(Drivers\BuiltIn\PCI\Instance, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatch RegOpenKeyEx(Drivers\BuiltIn\PCI \Instance) returned 2. 0x89a1f8a0: PCIBUS!RegMatch+(Drivers\BuiltIn\PCI\Template, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatch 1 devices to search 0x89a1f8a0: PCIBUS!RegMatch RegEnum =3D 0 0x89a1f8a0: PCIBUS!RegMatchOne+(Drivers\BuiltIn\PCI\Template, 0, 0, 0) 0x89a1f8a0: PCIBUS!RegMatchOne Checking key Drivers\BuiltIn\PCI \Template\MYNIC. 0x89a1f8a0: PCIBUS!RegMatchOne Match for Class (0x2) found. 0x89a1f8a0: PCIBUS!RegMatchOne Match for SubClass (0x0) found. 0x89a1f8a0: PCIBUS!RegMatchOne Match for ProgIF (0x0) found. 0x89a1f8a0: PCIBUS!RegMatchOne: Match for VendorID (0x10EC), DeviceID (0x8139) found. 0x89a1f8a0: PCIBUS!RegCopy+(Drivers\BuiltIn\PCI\Template\MYNIC, 0, 0, 0) 0x89a1f8a0: PCIBUS!OpenNonExistInstanceKey+(Drivers\BuiltIn\PCI \Instance\MYNIC) 0x89a1f8a0: PCIBUS!OpenNonExistInstanceKey-(Drivers\BuiltIn\PCI \Instance\MYNIC1) returns key 0x89a1f8a0: ---------------------------------------------------------------------------= =AD---- 0x89a1f8a0: Bus/Device/Function =3D 0/0/0, Ethernet Network Controller 0x89a1f8a0: VendorID =3D 0x10EC, DeviceID =3D 0x8139, Command =3D 0x0007, Status =3D 0x0290 0x89a1f8a0: RevisionID =3D 0x10, ProgIf =3D 0x00, SubClass =3D 0x00, BaseClass =3D 0x02 0x89a1f8a0: CacheLineSize =3D 0x00, LatencyTimer =3D 0x00, HeaderType =3D 0x00, BIST =3D 0x00 0x89a1f8a0: BaseAddresses: 0x89a1f8a0: 0x80000001 0xB0000000 0x00000000 0x00000000 0x00000000 0x00000000 0x89a1f8a0: CIS =3D 0x00000000, SubVendorID =3D 0x4554, SubSystemID =3D 0x434E 0x89a1f8a0: ROMBaseAddress =3D 0x00000000 0x89a1f8a0: InterruptLine =3D 0x00, InterruptPin =3D 0x01, MinGrant =3D 0x20, MaxLatency =3D 0x40 0x89a1f8a0: ---------------------------------------------------------------------------= =AD---- 0x89a1f8a0: !!!Open 0x89a1f8a0: !!!Open Success 0x89a1f8a0: BusEnum::BusEnum (ActivateRegPath=3DDrivers\Active \4294967284) 0x89a1f8a0: Pcibus.DLL : -CreatePciBus 0x89a1f8a0: PCIenum.cpp nit 0x89a1f8a0: AssignChildDriver 0x89a1f8a0: PciDeviceFolder 0x89a1f8a0: FindPCIPowerMgrInterface 0x89a1f8a0: Pcibus.DLL : -DeletePciBus 0x89a1f8a0: ~PciBusEnum 0x89a1f8a0: ~PciDeviceFolder 0x89a1f8a0: Close!!! 0x89a1f8a0: PCIBUS!DllMain: process detach 0x89a1f8a0: -ActivateAllChildDrivers!!! 0x89a1f8a0: -PostInit!!! 0x89a1f8a0: Close!!! 0x89a3bcc0: FILESYS: Launching services.exe 0x8999c000: IPDispatchDeviceControl returned Status 103 0x899979c8: NDIS:: CEPowerNotificationThread() exits!! 0x899976a0: HTTPD: DllMain attached 0x899976a0: HTTPD: Being called from executable <<\Windows \services.exe>> 0x899976a0: HTTPD:HTP_Init(0x00000001) 0x899976a0: HTTPD: Initializing web server: creating thread pool, initing interface mapping... 0x899976a0: HTTPD: Web Server supports the following components: ISAPI Extensions, ISAPI Filters, Authenticati on, SSL, 0x899976a0: HTTPD:IOControl(IOCTL_SERVICE_STARTED) creating global variales 0x899976a0: TELNETD: DllMain attached 0x899976a0: TELNETD: Caller executable =3D 1 0x899976a0: TEL_Init(1) 0x899976a0: TEL_IOControl(0x1FBE5DC, 17039404, 0x0, 0, 0x0, 0, 0x803EA10) 0x899976a0: TEL_IOControl(0x1FBE5DC, 17039404, 0x803EA7C, 16, 0x0, 0, 0x803E724) 0x899976a0: TEL_IOControl(0x1FBE5DC, 17039416, 0x803F05C, 4, 0x0, 0, 0x803EA10) 0x899976a0: TELNETD:TEL_IOControl(IOCTL_SERVICE_STARTED), setting state =3D SERVICE_STATE_ON 0x899976a0: FTPD: DllMain attached 0x899976a0: FTP_Init(0) 0x899976a0: FTPD: Starting Ftp server 0x89a3bcc0: FILESYS: Done launching apps 0x89a3bcc0: -DEVICE!DevloadPostInit 0x89a3bcc0: This device has booted 1 times !!! 0x899714a8: HTTPD: Initializing log files 0x899714a8: HTTPD: Unable to load \windows\secur32.dll, GLE=3D0x0000007e ***************************************************************************= =AD ************************ Any Help in this regard is much Appreciatable Thanks in Advance -Anand Tag: how to use BTSCOSND Tag: 113166
  - 4
    - 128M sdram issues hi,everyone I am upgrading my sdram configuration for 128M, Frist of all,I show my platform, CPU : Xscale pxa255 OS : Windows CE .Net 4.2 Flash : 32MB SDRAM : 128MB (32MBX4) since I have heard that it only spend 2 hours on this issue, why it cost me more than one week to solve the problem... Okay,let's see the process. I modified some files related, config.bib,memdefs.h,memmap.inc,xsc1.h,xsc1.inc,xsc1bd.h,xsc1bd.inc, fwxsc1.s,platform.reg.(if i missed some file,pls tell me) At first,i always modified all of files related, then the kernel hung...I can not find where is the problem, so,I modified some files step by step, I just changed OEMAddressTable in memmap.inc, DCD 0x80000000, 0xA0000000, 64 to DCD 0x80000000, 0xA0000000, 128 and I also modified xsc1bd.inc, MDCNFG_VAL EQU 0x19C119C1; SDRAM Config Reg (CL=2) to MDCNFG_VAL EQU 0x19C319C3; SDRAM Config Reg (CL=2) then,sdram register MDCNFG enable the bank1 which is also 64MB. After two changes above,I download the kernel,it still works. Then,I just modified config.bib MEMORY IF IMGFLASH ! NK 800B8000 02000000 RAMIMAGE ; SDRAM 32MB: [800B 8000 -> 820B 7FFF] RAM 820B8000 01C00000 RAM ; SDRAM 28MB: [820B 8000 -> 83CB 7FFF] EDBG 83F8D000 00020000 RESERVED ; x20000 for EBOOT - 3 Client memory pools of 24K (128K) ENDIF AUD_DMA 83CB8000 0000A000 RESERVED SLEEP_SAV 83CC2000 00001000 RESERVED DRV_GLB 83CC3000 00001000 RESERVED CACHE_FLG 83CC4000 0003C000 RESERVED ; for use by cache routines: 83CC_4000->83CC_4003 used for flagging. 83CC_4004->83CC_4803 rsvd for miniD DISPLAY 83D00000 00130000 RESERVED ; 1MB aligned BLOCK_BUF 83E30000 00080000 RESERVED UNUSED_BUF 83EB0000 000DD000 RESERVED whql_sig 00000001 00002000 EXTENSION ; WHQL signature extension (6KB). ZBANK 86000000 00100000 RESERVED to IF IMGFLASH ! NK 800B8000 02000000 RAMIMAGE ; SDRAM 32MB RAM 820B8000 05C00000 RAM ; SDRAM 28MB+64MB EDBG 87F8D000 00020000 RESERVED ; x20000 for EBOOT - 3 Client memory pools of 24K (128K) ENDIF AUD_DMA 87CB8000 0000A000 RESERVED SLEEP_SAV 87CC2000 00001000 RESERVED DRV_GLB 87CC3000 00001000 RESERVED CACHE_FLG 87CC4000 0003C000 RESERVED ; for use by cache routines: 83CC_4000->83CC_4003 used for flagging. 83CC_4004->83CC_4803 rsvd for miniD DISPLAY 87D00000 00130000 RESERVED ; 1MB aligned BLOCK_BUF 87E30000 00080000 RESERVED UNUSED_BUF 87EB0000 000DD000 RESERVED whql_sig 00000001 00002000 EXTENSION ; WHQL signature extension (6KB). ZBANK 8A000000 00100000 RESERVED and also changed the other related addresses in memdefs.h,xsc1.h,xsc1.inc,xsc1bd.h,xsc1bd.inc. for instance: i modified #define MEM_BASE_PHYSICAL 0xA3CB8000 #define MEM_BASE_C_VIRTUAL 0x83CB8000 #define EDBG_PHYSICAL_MEMORY_START 0x83F8D000 // Ethernet Debugger Pool Address to #define MEM_BASE_PHYSICAL 0xA7CB8000 #define MEM_BASE_C_VIRTUAL 0x87CB8000 #define EDBG_PHYSICAL_MEMORY_START 0x87F8D000 // Ethernet Debugger Pool Address It seems that all the PHYSICAL address should not be modified, I try it before,but also do not work out.. so at last,I made the above change. And during these days,I also tried to debug images, but it just hung as the release image.. anyway,my system hung here: ****** Downloading operating system image for SDRAM target ****** TFTP: Desktop losing ACK, block number = 54250, Ack again rom_offset=0x0. Found pTOC signature. ROMHDR at Address 800B8044h RomHdr.ulRAMStart=81C50000h RomHdr.physfirst=800B8000h. Done. Writing 0x80076BD8 to flash address 0xBC340000 (length=0xA40). Sector=0x200 (Length=0x6) Block=0x1 (Length=0x1). Handling non-block aligned data... FlashErase: Unlocking flash block(s) [0x1, 0x1] (please wait): Done. Erasing flash block(s) [0x1, 0x1] (please wait): .Done. Writing to flash (please wait): Done. Got EDBG_CMD_JUMPIMG Got EDBG_CMD_CONFIG, flags:0x00000000 Download successful! Jumping to image at physical 0xA00B9000... Begin ****************************************************** ****************************************************** ****************************************************** ****************************************************** ****************************************************** OEMInitDebugSerial using UART2 Windows CE Kernel for ARM Built on Mar 13 2003 at 22:54:19 ProcessorType=02d0 Revision=6 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 800b9ef8 Sp=ffffc7cc /////////////////////////////////////// and the debug kernel output here: normal 64M: Download successful! Jumping to image at physical 0xA00B9000... Begin ****************************************************** ****************************************************** ****************************************************** ****************************************************** ****************************************************** OEMInitDebugSerial using UART2 Windows CE Kernel for ARM Built on Mar 13 2003 at 22:43:27 ProcessorType=02d0 Revision=6 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 800b9ef4 +OEMKitlInit (D) Before OEMEthInit (D)(OEMEthInit) Checking CS8900A Devices.. CS8900A Ethernet Controller Already Initilaized: OK VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes Tx buffer [0xA2D302E0] to [0xA2D342E0]. [0xA2D2C2C0] to [0xA2D302C0]. ridge:: NK add MAC: [0-B-29-FF-55-66] p Driver_Globals (ether stuff only) at : 0xA3CC3000 pDriverGlobals->eth.EbootMagicNum= 0x45424F54 pDriverGlobals->eth.etherEnabled= 0x0 pDriverGlobals->eth.etherFlags= 0x0 pDriverGlobals->eth.TargetAddr.dwIP= 0x508412AC pDriverGlobals->eth.TargetAddr.wMAC= 0xA3CC3910 pDriverGlobals->eth.TargetAddr.wPort= 0xD403 pDriverGlobals->eth.DownloadHostAddr.dwIP= 0x5B8412AC pDriverGlobals->eth.DownloadHostAddr.wMAC= 0xA3CC3920 pDriverGlobals->eth.DownloadHostAddr.wPort= 0x1E04 pDriverGlobals->eth.DbgHostAddr.dwIP= 0x0 pDriverGlobals->eth.DbgHostAddr.wMAC= 0xA3CC392C pDriverGlobals->eth.DbgHostAddr.wPort= 0x0 pDriverGlobals->eth.KdbgHostAddr.dwIP= 0x0 pDriverGlobals->eth.KdbgHostAddr.wMAC= 0xA3CC3938 pDriverGlobals->eth.KdbgHostAddr.wPort= 0x0 pDriverGlobals->eth.PpshHostAddr.dwIP= 0x0 pDriverGlobals->eth.PpshHostAddr.wMAC= 0xA3CC3944 pDriverGlobals->eth.PpshHostAddr.wPort= 0x0 pDriverGlobals->eth.SubnetMask= 0xC0FFFFFF pDriverGlobals->eth.DHCPLeaseTime= 0x0 pDriverGlobals->eth.EdbgFlags= 0x1 OEMether IP Addr: 172.18.132.80 OEMether IP netmask: 255.255.255.192 (D)(OEMEthInit) SysIntrVal = EDBG_SYSINTR_NOINTR (D) After OEMEthInit Device XSBase25521862, IP 172.18.132.80, Port 981 (D) Before KitlEtherInit Calling EdbgInitDHCP (D) After KitlEtherInit -OEMKitlInit Host connected Host IP: 172.18.132.91, port 1050 KeyIndex 0 = -1 KeyIndex 1 = -1 KeyIndex 2 = -1 KeyIndex 3 = -1 KeyIndex 4 = -1 KeyIndex 5 = -1 KeyIndex 6 = -1 KeyIndex 7 = -1 +KITLRegisterDfltClient, service:0 +KITLRegisterDfltClient, service:1 KITLGlobalState == 0x61 KITL Initialized Waiting for service 'DBGMSG' to connect..., fUseSysCalls = 0 ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service PPSH ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service PPSH ProcessAdminMsg: Receive Config message for service DBGMSG ARMInit done. +KITLRegisterDfltClient, service:2 ProcessAdminMsg: Receive Config message for service KDBG ProcessAdminMsg: Receive Config message for service KDBG KITL: Leaving polling mode... KITL Checking client registrations +RegisterClientPart2: Id 0x00000000 KITL Timer thread started, (hTh: 0x03CB4FDE, pTh: 0x83C80000) -RegisterClientPart2 +RegisterClientPart2: Id 0x00000001 -RegisterClientPart2 VBridge:: VB_INITIALIZED returns [1] VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes buffer [0xA2D302E0] to [0xA2D342E0]. buffer [0xA2D2C2C0] to [0xA2D302C0]. 0x83a645a8: TAPI:OldAddTapiDevice - This BSP is loading TSPs by old method!!! Change registry settings to use new way!!! OEMEthCurrentPacketFilter set to [0xB] VBridge:: Current VMini packet filter = [0xB] CS8900: Set receive packet filter [Filter=0xB, RxCTL=0xF05]. OEMEthMulticastList():: No of Entries [1] [0] : 1 - 0 - 5E - 0 - 0 - 1 OEMEthMulticastList returning [1] CS8900: Multicast[1 of 1] = 1-0-5E-0-0-1 CS8900: Logical Address Filter = 40.0.0.0. //////////////////////////////////////// 128M hung: Download successful! Jumping to image at physical 0xA00B9000... Begin ****************************************************** ****************************************************** ****************************************************** ****************************************************** ****************************************************** OEMInitDebugSerial using UART2 Windows CE Kernel for ARM Built on Mar 13 2003 at 22:43:27 ProcessorType=02d0 Revision=6 sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 800b9ef8 +OEMKitlInit (D) Before OEMEthInit (D)(OEMEthInit) Checking CS8900A Devices.. CS8900A Ethernet Controller Already Initilaized: OK VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes buffer [0xA2D302E0] to [0xA2D342E0]. buffer [0xA2D2C2C0] to [0xA2D302C0]. NK add MAC: [0-B-29-FF-55-66] Dump Driver_Globals (ether stuff only) at : 0xA7CC3000 pDriverGlobals->eth.EbootMagicNum= 0x45424F54 pDriverGlobals->eth.etherEnabled= 0x0 pDriverGlobals->eth.etherFlags= 0x0 pDriverGlobals->eth.TargetAddr.dwIP= 0x508412AC pDriverGlobals->eth.TargetAddr.wMAC= 0xA7CC3910 pDriverGlobals->eth.TargetAddr.wPort= 0xD403 pDriverGlobals->eth.DownloadHostAddr.dwIP= 0x5B8412AC pDriverGlobals->eth.DownloadHostAddr.wMAC= 0xA7CC3920 pDriverGlobals->eth.DownloadHostAddr.wPort= 0x6804 pDriverGlobals->eth.DbgHostAddr.dwIP= 0x0 pDriverGlobals->eth.DbgHostAddr.wMAC= 0xA7CC392C pDriverGlobals->eth.DbgHostAddr.wPort= 0x0 pDriverGlobals->eth.KdbgHostAddr.dwIP= 0x0 pDriverGlobals->eth.KdbgHostAddr.wMAC= 0xA7CC3938 pDriverGlobals->eth.KdbgHostAddr.wPort= 0x0 pDriverGlobals->eth.PpshHostAddr.dwIP= 0x0 pDriverGlobals->eth.PpshHostAddr.wMAC= 0xA7CC3944 pDriverGlobals->eth.PpshHostAddr.wPort= 0x0 pDriverGlobals->eth.SubnetMask= 0xC0FFFFFF pDriverGlobals->eth.DHCPLeaseTime= 0x0 pDriverGlobals->eth.EdbgFlags= 0x1 OEMether IP Addr: 172.18.132.80 OEMether IP netmask: 255.255.255.192 (D)(OEMEthInit) SysIntrVal = EDBG_SYSINTR_NOINTR (D) After OEMEthInit Device XSBase25521862, IP 172.18.132.80, Port 981 (D) Before KitlEtherInit Calling EdbgInitDHCP (D) After KitlEtherInit -OEMKitlInit Host connected Host IP: 172.18.132.91, port 1124 KeyIndex 0 = -1 KeyIndex 1 = -1 KeyIndex 2 = -1 KeyIndex 3 = -1 KeyIndex 4 = -1 KeyIndex 5 = -4194305 KeyIndex 6 = -4194305 KeyIndex 7 = -1 +KITLRegisterDfltClient, service:0 +KITLRegisterDfltClient, service:1 KITLGlobalState == 0x61 KITL Initialized Waiting for service 'DBGMSG' to connect..., fUseSysCalls = 0 ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service PPSH ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service DBGMSG ProcessAdminMsg: Receive Config message for service PPSH ProcessAdminMsg: Receive Config message for service DBGMSG ARMInit done. +KITLRegisterDfltClient, service:2 ProcessAdminMsg: Receive Config message for service KDBG ProcessAdminMsg: Receive Config message for service KDBG KITL: Leaving polling mode... KITL Checking client registrations +RegisterClientPart2: Id 0x00000000 KITL Timer thread started, (hTh: 0x07CB4FDE, pTh: 0x87C80000) -RegisterClientPart2 +RegisterClientPart2: Id 0x00000001 -RegisterClientPart2 looking forward to your suggestions,I was a bit confused now.. thank u very much. Tag: how to use BTSCOSND Tag: 113164
  - 5
    - How to tell which compiler in C code? Our DLL will be used both in EVC 4.0 and WINCE4.2, and we plan to add different code according to the compiler. So we need to know how to tell which compiler in C code? Is there any predefined things to indicate this? #if defined(XXXXX) /* do something here for CEPC in PB */ ......... #else /* do alternate here for iPaq in EVC4 */ ........ #endif Thanks for any suggestion! Cetrier Tag: how to use BTSCOSND Tag: 113161
  - 6
    - mdoc h3 Hi, i can boot and launch windows from mdoc h3. 4 partitions created but i can't see any of them under My Device. i did necessary registry settings. i think there is a problem with formating. does any one knows correct dformat syntax for windows ce? windows ce 5. pxa 270. Thanks Alli Tag: how to use BTSCOSND Tag: 113147
  - 7
    - TimeChange Notification Error at bootup Hi, I am using an external real time clock to store the local time. Inside RTC_Init(), I start an endless thread waiting for time events "NOTIFICATION_EVENT_TIME_CHANGE" and "NOTIFICATION_EVENT_TZ_CHANGE" to be notified about time changes (see code below). This works fine until Suspend/Resume! If the board did a Suspend/Resume, I get following errors at bootup: > Notification Error : Cannot execute \\.\Notifications\NamedEvents\DSTTimeChange > Notification Error : Cannot execute \\.\Notifications\NamedEvents\TaskbarTimeChangeEvent Afterwards, a "NOTIFICATION_EVENT_TIME_CHANGE" event occurs. When I delete my persistent registry, the errors disappear until I do another Suspend/Resume. If I disable the RTC driver, no errors are visible at all! Does anybody know why these errors happen or do I make something wrong inside my endless thread? Thanks in advance beat DWORD WINAPI synchronizerThread(LPVOID param) { HANDLE hTimeEvent[2]; CE_NOTIFICATION_TRIGGER trigger[2]; SYSTEMTIME time; DWORD rWaitObject; // Time change GetLocalTime(&trigger[0].stStartTime); trigger[0].dwSize = sizeof(CE_NOTIFICATION_TRIGGER); trigger[0].dwType = CNT_EVENT ; trigger[0].dwEvent = NOTIFICATION_EVENT_TIME_CHANGE; trigger[0].lpszApplication = L"\\\\.\\Notifications\\NamedEvents\ \TimeNotify"; trigger[0].lpszArguments = 0; trigger[0].stEndTime = trigger[0].stStartTime; // TimeZone change GetLocalTime(&trigger[1].stStartTime); trigger[1].dwSize = sizeof(CE_NOTIFICATION_TRIGGER); trigger[1].dwType = CNT_EVENT ; trigger[1].dwEvent = NOTIFICATION_EVENT_TZ_CHANGE; trigger[1].lpszApplication = L"\\\\.\\Notifications\\NamedEvents\ \TimeZoneNotify"; trigger[1].lpszArguments = 0; trigger[1].stEndTime = trigger[1].stStartTime; hTimeEvent[0] = CreateEvent(0, FALSE, FALSE, L"TimeNotify"); hTimeEvent[1] = CreateEvent(0, FALSE, FALSE, L"TimeZoneNotify"); if ( (hTimeEvent[0] == 0) || (hTimeEvent[1] == 0) ) { RETAILMSG(1, (L"External RTC - Creation of TimeEvents failed!\r \n")); } else { WaitForAPIReady(SH_WMGR, INFINITE); while (CeSetUserNotificationEx(0, &trigger[0], 0) == NULL) { Sleep(200); } while (CeSetUserNotificationEx(0, &trigger[1], 0) == NULL) { Sleep(200); } while (1) { rWaitObject = WaitForMultipleObjects(2, hTimeEvent, FALSE, INFINITE); if ( (WAIT_FAILED == rWaitObject) || (WAIT_TIMEOUT == rWaitObject) ) RETAILMSG(1, (L"External RTC Task - WaitForMultipleObjects ERROR!\r\n")); } else { EnterCriticalSection(&csRTC); GetLocalTime(&time); setExternalRtc(&time); LeaveCriticalSection(&csRTC); } } } return 0; } Tag: how to use BTSCOSND Tag: 113134
  - 8
    - System hang after wake up if long press on touch panel Hi All, I have a situation here with the touch panel. I'm using a WINCE 5.0 OS. It seems that if i long press on the touch panel (can be anywhere on the screen) and did a system suspend, on the wake up the system seems to hang. From the trace i can see all the devices have already waken up,(spi, i2c, file systm etc), but it stops after device power up. Have any one meant with the same issue? Can anyone advice? Sincerely Jimmy Tag: how to use BTSCOSND Tag: 113133
  - 9
    - how is the flash mdd behavior in R2? 1. From some senario I guess flashmdd layer reserves some blocks for private usage(maybe for compact). For example, pdd layer tells mdd there are 1030656 sectors through FMD_GetInfo(), while I can see only 1015040 sectors through control panel. where are the losted 15616 sectors? 2. Moreover, can i open some debug zone to watch the mdd layer's behavior? 3. there is an interface, GetLifeCycleInfo, in pdd to get erase time, while the sample only returns ERROR_NOT_SUPPORTED. Doesn't mean if pdd doen't give any information to mdd, mdd won't do any wearleveling? Tag: how to use BTSCOSND Tag: 113132
  - 10
    - Camera DShow Integration Test Failure on WM6.1 with NULLCAM I am working on ARMV4I device. BSP is based on FSample bsp comes with WM610. I am using latest March 2008 LTK from MSFT, also with this LTK Camera Dshow Integration Test passes on Device Emulator. I am using WM6.1 image (for our ARM device) build using following sysgen variables: 1) SYSGEN_CAMERA_NULL=1(To Include NULLCAM Driver) 2) SYSGEN_DSHOW_CAPTURE=1(Used Previously on WM5 and later versions. Even without this variable LTK doesn't pass) 3) IMGCAMERAOEM=0 (To include P&V Camera registries) 4) SYSGEN_DSHOW_WMV=1 (Got hint from Fsample, Even without this variable LTK doesn't pass) 5) SYSGEN_DSHOW_ICM=1 (Got hint from Fsample, Even without this variable LTK doesn't pass) 6) set BSP_NOCAMERA=1 (To exclude default FSample Camera Driver) So this image contains NULLCAM only. Also P&V camera application properly for all combinations with above image on our ARMV4I device. If I run "Camera Direct Show Integration test" for 100-300 test nos. Test takes 45 sec to finish, in which 23 test out of 32 fails. Same kind of results happen with whole LTK. Following is the failure message for almost all the failed tests: CCaptureFramework: Loading the video property bag data failed. Initializing the capture graph failed. CCaptureFramework: Pausing the graph failed. I have seen this kind of failure before with WM5 later AKUs, when We don't use updated WMCETK. But here this possibility ruled out, because same LTK tests are passing on device emulator. I have exhaust all my attempts, nothing more to try. Can anyone please give me some pointer, what else I can try after reaching above state. Tag: how to use BTSCOSND Tag: 113129
  - 11
    - mpeg2demux for demuxing raw transport stream Hi, Tried building below grpah : async reader (raw file TransportStream.dat) -> mpeg2 demux -> mpeg2 decoder -> video render For the above graph I am getting error VFW_E_NO_TRANSPORT (0x80040266L) , async -> mpeg2demux * async reader and mpeg2demux are Microsoft's filters without any modification. * .dat file type is added in registry which uses async reader as source filter, majortype - MEDIATYPE_Stream and subtype MEDIASUBTYPE_MPEG2_TRANSPORT Queries: 1. I did some search on this error and found http://groups.google.com/group/microsoft.public.win32.programmer.directx.video/msg/b9947140313f33e5 is this what I have to do? 2. Does mpeg2demux for wince6.0 support MEDIASUBTYPE_MPEG2_TRANSPORT streams? Regards, Dev Tag: how to use BTSCOSND Tag: 113128
  - 12
    - Debug Zones question I noticed that when running the debug version of CE6.0 (x86 or ARM BSPs) it takes a long time to start up compared to 5.0. I believe that I need to disable debug zones. I think one big culprit is KITL who appears to spit out this on the debug port in an incredible rate: Timer: Removing entry, slot: 15, expire: 4294952713 TimerEnt: slot 0, expire: 345400192 I read that I should be able to mask off zones in the HKEY_LOCAL_MACHINE/DebugZones From what I can discern from code the name should be KITL so I added "KITL"=dword:1 to try and only display errors. This does not seem to work. When I open CE Debug Zones window the other zones under kitl.dll is still enabled. And messages are still displayed. Anyone have any advice on this? Daniel Tag: how to use BTSCOSND Tag: 113123
  - 13
    - SanDisk mDOC Has anyone been able to perform DMAs (with synchronous bursts) to or from this part? Is the use of the DMARQ line required? Tag: how to use BTSCOSND Tag: 113117
  - 14
    - Reading MAC Address Hi All, I like to read and dipslay the MAC Address of the device. I search on help and it shows that typedef uchar NDIS_802_11_MAC_ADDRESS[6] contains the MAC address but when i read it always returns Zero. Any help please. Thanks Tag: how to use BTSCOSND Tag: 113115
  - 15
    - SDIO WIFI and CE 6.0 Hello, I try to find a SDIO WIFI card that works under CE 6.0 and compliant with SD 2.0. My CPU is an iMx31 and SDHC card works well with it. Regards. Tag: how to use BTSCOSND Tag: 113110
  - 16
    - suspend menu missing!! Hi all, WinCE 5.0. x86 I have a workspace file (pbxml) file provided by the customer; when i build the image and boot it, the suspend menu (start->suspend) is missing. Could anyone tell which catalog file need to be added in order to get the suspend menu??? Thanks in advance. Tag: how to use BTSCOSND Tag: 113098
  - 17
    - USBAttachDevice : LPCUSB_INTERFACE UsbInterface = NULL Hi, I am building an USB-CDC driver. I started from scratch with just the basic stream interface. At this point, I plug in my device, it is recognized from the regsettings I made, my DLL is loaded, and USBDeviceAttach is called. From this point, I am using the PRN driver as an example. I copied ParseUsbDescriptors() but this fails. (do I need it anyway ?, the device is already the right one, else my driver wouldn't have been loaded... (???), or is it also loaded under differrent circumstances ? ) It fails because the UsbInterface pointer passed to USBAttachDevice is NULL. Why is that ? BOOL USBDeviceAttach( USB_HANDLE hDevice,LPCUSB_FUNCS UsbFuncs, LPCUSB_INTERFACE UsbInterface,LPCWSTR UniqueDriverId, LPBOOL AcceptControl, LPCUSB_DRIVER_SETTINGS UsbDriverSettings, DWORD Unused) Greetings, Rob. Tag: how to use BTSCOSND Tag: 113093
  - 18
    - Run a app in a init, performance decrease a lot Hi, I would like to run a custom application when kernel is loading. to do that I have added in my registry these settings: [HKEY_LOCAL_MACHINE\init] "Launch89"="Mem.exe" "Depend89"=hex:1e,00 The app Mem.app, is an application that listen a sockect connection a read some data in our system, but the problem comes when app is running and accept an incomming connection, the performance of the app is quite low compared if I run the app manually from a telnet session. Could be this about the WinCe priorities for the init processes? How can modify this? Thanks, Bye Tag: how to use BTSCOSND Tag: 113090
  - 19
    - spi ethernet initialization Hello, I am working on microchip SPI ethernet controller. to get the debug ethernet work on my hardware. I have done the initialization successfully, and when i read my MAC registers, there are some random values every time. I hope there is some delay problems in chipselect timings. Please let me know, what will be the exact problem. why my MAC registers configuration is not stable. Thanks in advance, Kumar Tag: how to use BTSCOSND Tag: 113088
  - 20
    - Simulate CF card removal Hi All, My application installs a driver for the CF card from CAB. Now, I'd like to load the installed driver so that user won't have to remove the card or reset the device. Merely I need to simulate removal and insertion of the CF card programmatic ally. What function should I use for that? Tag: how to use BTSCOSND Tag: 113080
  - 21
    - Touch screen jitters by one pixel Hi, If I hold the stylus on the touch screen, I can see a jitter of only one pixel. My touch screen driver does already filtering. I saw once registry keys, which enable filtering of jitter of a certain amount of pixels, but I can't find them anymore. How can I suppress a jitter of a certain amount of pixels using registry keys under CE6? Thanks, Peter Tag: how to use BTSCOSND Tag: 113077
  - 22
    - SYSGEN RDP Error after Windows CE 6.0 R2 installed, Help please! I have installed the CE6 R2, CE6 2007 Rollup and the April 2008 update. When I do "Build and sysgen" or "Rebuild and clean sysgen", I got the error: -- TARGETNAME: cetsc TARGETTYPE: PROGRAM RELEASETYPE: OAK TARGETLIBS: D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\lib\x86\retail \cetsc_ALL.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\target\x86\retail \0409\cetsc.res D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\lib\x86\retail\atls.lib D: \Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\lib \x86\retail\atlosapis.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail\ole32.lib D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib \x86\retail\oleaut32.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail\uuid.lib D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib \x86\retail\commctrl.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail \iphlpapi.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail \ceshell.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail \ceosutil.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail\coredll.lib D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk \lib\x86\retail\crypt32.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail \secur32.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail \credui.lib D:\WINCE600\public\common\oak\lib\x86\retail \credsspcfg.lib D:\WINCE600\public\rdp\oak\lib\x86\retail \cryptlib.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail \ws2.lib D:\WINCE600\public\common\oak\lib\x86\retail \rsa32.lib D:\WINCE600\public\rdp\oak\lib\x86\retail\rdrstubs.lib D: \WINCE600\public\common\oak\lib\x86\retail\corelib0.lib D:\Work\WinTerm \OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\lib\x86\retail \corelib1.lib SOURCELIBS: D:\WINCE600\public\rdp\oak\lib\x86\retail\cetscbase.lib D: \WINCE600\public\rdp\oak\lib\x86\retail\cecommon2.lib EXEENTRY: WinMainCRTStartup DLLENTRY: _DllMainCRTStartup makefile.def: Including D:\WINCE600\public\common\oak\misc \Sources.default makefile.def: BUILDROOT is D:\WINCE600\public\rdp\cesysgen makefile.def: Including D:\WINCE600\PUBLIC\RDP\CESYSGEN\sources makefile.def: Including D:\WINCE600\public\common\oak\misc\Sources.CE Directory: D:\WINCE600\PUBLIC\RDP\CESYSGEN TARGETNAME: cetsc makefile.def: Including D:\WINCE600\public\common\oak\misc \sources.ReleaseType_OAK set LIB=D:\WINCE600\sdk\CE\lib BUILD_MARKER:LINK_EXE_START Linking D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\target\x86\retail \cetsc.exe link /LARGEADDRESSAWARE -out:D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\target\x86\retail \cetsc.exe -machine:x86 @C:\DOCUME~1\Hou\LOCALS~1\Temp\nm1ED4.tmp Microsoft (R) Incremental Linker Version 8.00.50727.42 Copyright (C) Microsoft Corporation. All rights reserved. -nodefaultlib -entry:WinMainCRTStartup -pdb:D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen \oak\target\x86\retail\cetsc.pdb -pdbaltpath:cetsc.pdb /opt:ref -debug -debugtype:cv -incremental:no /safeseh -map:D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen \oak\target\x86\retail\cetsc.map -savebaserelocations:D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\target\x86\retail \cetsc.rel -MERGE:.rdata=.text -ignore: 4001,4070,4078,4086,4089,4096,4099,4108,4229 /STACK:65536,4096 - debugtype:cv,fixup -incremental:no /subsystem:windowsce,6.00 -base:0x00010000 D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\lib \x86\retail\cetsc_ALL.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\target\x86\retail \0409\cetsc.res D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\lib\x86\retail\atls.lib D: \Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\lib \x86\retail\atlosapis.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail\ole32.lib D: \Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib \x86\retail\oleaut32.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail\uuid.lib D: \Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib \x86\retail\commctrl.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail \iphlpapi.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail\ceshell.lib D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib \x86\retail\ceosutil.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail\coredll.lib D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib \x86\retail\crypt32.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib\x86\retail\secur32.lib D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib \x86\retail\credui.lib D:\WINCE600\public\common\oak\lib\x86\retail \credsspcfg.lib D:\WINCE600\public\rdp\oak\lib\x86\retail\cryptlib.lib D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\sdk\lib \x86\retail\ws2.lib D:\WINCE600\public\common\oak\lib\x86\retail \rsa32.lib D:\WINCE600\public\rdp\oak\lib\x86\retail\rdrstubs.lib D: \WINCE600\public\common\oak\lib\x86\retail\corelib0.lib D:\Work\WinTerm \OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\lib\x86\retail \corelib1.lib D:\WINCE600\public\common\oak\lib\x86\retail \corelib0.lib D:\Work\WinTerm\OSDesign \CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak\lib\x86\retail \corelib1.lib D:\WINCE600\public\rdp\oak\lib\x86\retail\cetscbase.lib D: \WINCE600\public\rdp\oak\lib\x86\retail\cecommon2.lib cetscbase.lib(mainwnd.obj) : error LNK2019: unresolved external symbol _CreateTscCore referenced in function "protected: struct HWND__ * __thiscall CMainWnd::CreateCore(void)" (? CreateCore@CMainWnd@@IAEPAUHWND__@@XZ) cetscbase.lib(mainwnd.obj) : error LNK2019: unresolved external symbol _DeleteTscCore referenced in function "public: int __thiscall CMainWnd::OnClose(void)" (?OnClose@CMainWnd@@QAEHXZ) cetscbase.lib(mainwnd.obj) : error LNK2019: unresolved external symbol _CloseTscUI referenced in function "public: int __thiscall CMainWnd::OnClose(void)" (?OnClose@CMainWnd@@QAEHXZ) cetscbase.lib(mainwnd.obj) : error LNK2019: unresolved external symbol _StartTscUI referenced in function _WinMain rdrstubs.lib(smartptr.obj) : error LNK2019: unresolved external symbol "void * __cdecl TSAlloc(unsigned long)" (?TSAlloc@@YAPAXK@Z) referenced in function "void * __cdecl operator new(unsigned int)" (?? 2@YAPAXI@Z) rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol "void * __cdecl TSAlloc(unsigned long)" (?TSAlloc@@YAPAXK@Z) rdrstubs.lib(smartptr.obj) : error LNK2019: unresolved external symbol "void __cdecl TSFree(void *)" (?TSFree@@YAXPAX@Z) referenced in function "void __cdecl operator delete(void *)" (??3@YAXPAX@Z) rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol "void __cdecl TSFree(void *)" (?TSFree@@YAXPAX@Z) rdrstubs.lib(rdrclip.obj) : error LNK2019: unresolved external symbol "public: virtual __thiscall CTSObject::~CTSObject(void)" (?? 1CTSObject@@UAE@XZ) referenced in function "public: virtual __thiscall CTSUnknown::~CTSUnknown(void)" (??1CTSUnknown@@UAE@XZ) rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol "public: virtual long __cdecl CTSUnknown::NonDelegatingQueryInterface(struct _GUID const &,void * *)" (?NonDelegatingQueryInterface@CTSUnknown@@UAAJABU_GUID@@PAPAX@Z) rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol "public: virtual unsigned long __cdecl CTSUnknown::NonDelegatingAddRef(void)" (? NonDelegatingAddRef@CTSUnknown@@UAAKXZ) rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol "public: virtual unsigned long __cdecl CTSUnknown::NonDelegatingRelease(void)" (? NonDelegatingRelease@CTSUnknown@@UAAKXZ) rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol "public: virtual long __thiscall CTSObject::Initialize(void)" (? Initialize@CTSObject@@UAEJXZ) rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol "public: virtual long __thiscall CTSObject::Terminate(void)" (? Terminate@CTSObject@@UAEJXZ) rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol _IID_ITSClipPlugin rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol _IID_ITSVirtualChannelPlugin rdrstubs.lib(rdrclip.obj) : error LNK2001: unresolved external symbol _IID_ITSClientPlugin rdrstubs.lib(rdrclip.obj) : error LNK2019: unresolved external symbol "public: __thiscall CTSUnknown::CTSUnknown(char const *,struct IUnknown *)" (??0CTSUnknown@@QAE@PBDPAUIUnknown@@@Z) referenced in function "public: __thiscall CClipPlugin::CClipPlugin(struct IUnknown *)" (??0CClipPlugin@@QAE@PAUIUnknown@@@Z) D:\Work\WinTerm\OSDesign\CE6\CN700\Wince600\VIABSP_x86\cesysgen\oak \target\x86\retail\cetsc.exe : fatal error LNK1120: 16 unresolved externals NMAKE : fatal error U1077: 'link' : return code '0x460' Stop. NMAKE : fatal error U1077: 'D:\WINCE600\sdk\bin\i386\nmake.exe' : return code '0x2' Stop. NMAKE : fatal error U1077: 'D:\WINCE600\sdk\bin\i386\nmake.exe' : return code '0x2' Stop. -- Tag: how to use BTSCOSND Tag: 113076
  - 23
    - About kdbg and the interrupt Hi I have a question about the interrupt handling in the kdbg. I saw in kdstub that the debugger disables the interrupts just before sending or receiving a debug packet (function KdSend and KdRecv). Actually I'm using the kitl over serial with a interrupt based driver. To use the debugger, I have to make a call to INTERRUPTS_ON in each call to kitlSend because the debugger disabled the interrupts just before. If I remove this call to INTERRUPTS_ON and use a poll based driver, the system cannot boot really far (stop after shell.exe load) because the scheduling is disabled (the interrupts are masked so the tick interrupt cannot be handled) . Another problem caused by the reenabling of the interrupts inside the KITL driver is that I'm not able to place breakpoint inside ISR. In fact, the interrupts seems to be reenabled during the ISR causing data aborts and the crash of the system (I think the context is corrupted by the reenabling of the interrupt and leads to this behaviour). So my question is, Can I debug the ISR with the Kdbg knowing that it disables the interrupts ? The other question is, how the kitl interrupt based system can work if the debugger disables the interrupts ? Tag: how to use BTSCOSND Tag: 113074
  - 24
    - Activesync file filter Hi All I am working with smdk2440. My device connect to PC and I can explore all folders from PC. Now I want to hide some folders on device from PC explorer (means they should not be visible in PC). What should I do for this purpose? Is a filesystem filter required or change to activesync code? Regards -- Message posted via PocketPCJunkies.com http://www.pocketpcjunkies.com/Uwe/Forums.aspx/wince-pb/200806/1 Tag: how to use BTSCOSND Tag: 113072
  - 25
    - How to get IrSIR work? Hi: how to get IrSIR work im our BSP and test it? we have IrCOMM.dll IrSIR.dll and set SYSGEN_IRDA=1 is it enough for IrSIR work? or need something? and how to test it? if anybody can tell us. i m very appreciated. and best Regards. vincent tsai Tag: how to use BTSCOSND Tag: 113068

Hi All,

I have to read the bluetooth audio received in the BTSCOSND dll and
play it . Can someone please explain me how use the BTSCOSND dll
APIs ? In Readme.txt of btscosnd it has been mentioned that see
BTHAUDIO for how to utilize the dll but I couldn't find the BTHAUDIO
anywhere .

Regards,
Gurubasavaraja

Top