How do I move a current version of Office 2007 to a NEW computer?

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - missing ZF612707.cab stops Detect and Repair where can I get ZF612707.cab. And where would I put it so Detect and Repair will run successfully? Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 293041
  - 2
    - cannot reinstall microsoft 2003 I need to reinstall Office 2003, which I purchased and downloaded from Microsoft sometime ago. I Have the prod. reg. key, but but get an error 1402 saying I don't have sufficient auth. to update the regestry. I am the administrator. Can anyone tell me if it is available to be downloaded again from Microsoft without my having to pay for it a second time? thanks Michael -- Thank you Michael Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 293039
  - 3
    - power point 2007 templates I have downloaded quite a good no of templates from the net, however, I am neither able to see them nor open them for utilising in my presentations. How do I do that ? Pl guide me Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 293036
  - 4
    - Missing SKU111.cap file stops upgrade to 2007 I have just reformatted my hard drive. Because my Office 2007 is an upgrade, I installed my copy of Office 2003 and Proofing Tools and automatic updates. The I tried to install my Office 2007. Over half way through the installation, I get " error 1311. Source file not found. D:\SKU111.cab Verify that the file exists and that you can acess it." I have tried the installation twice and received the same message. The Office 2003 seems to be functioning OK. This is a single HD laptop. D was the CD drive with the upgrade software. How can get the upgrade to install. I searched for the SKU111.cab, but could find it neither on the installlation CD not on hy HD. I would appreciate any assistance. Thanks. Jim Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 293035
  - 5
    - Outlook 2000 This date, while recieving email via outlook, the program just stop! Nothing allowed in or out. When rebooted pc, all else is fine. Outlook will open but unable to do anything? Can't open an email, scroll, contacts, notes - nothing works at all! Tool bar note of connecting to server twirls for about 5 minutes then stops... Pop-up states that I'm not connected when I am... Tried Office repair, reboot and the same sequence happens. Before giving up for the evening, I tried to open again and now I have nothing! No contacts, no appointments and no recognition of any of my servers! About to freak out! Can I restore my outlook files? D.A. Nett Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 293033
  - 6
    - why does office 2007 keep reconfigering when its opened ? why does office 2007 keep reconfigering when its opened ? it takes about 5 to 10 minutes. Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 293030
  - 7
    - bamboo and word I have Vista and a Bamboo tablet.....any idea how to get them to work? The tablet didn't come with more than a page of instructions. I can see the pen/ ink functions in Word but I can't click on them. Any help would be GREATLY appreciated...... Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 293026
  - 8
    - Office 2007 Home and Office When a calender reminder should pop-up it never shows up unless I open office calender. Do I need Outlook for calender reminders to work? Would this happen because Office 2007 Home and Office doesn't have Outlook in it? Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 293023
  - 9
    - told to install office assistant each time accessing email. When I log on to email, I get a message that the program encountered a problem and if I would Ilike to install "office assistant." I have used OFFICE 2000 professional disks and was able to log on. The next time I want to log on the same message appears. How can I correct this situation. Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 293022
  - 10
    - If I by the serial to Office 2007, can I use it in an other Office Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 293015
  - 11
    - Why does my Office Progs Look Like This? :-( In Office Options, the 'black' style is selected but this is what I have. http://i27.tinypic.com/kc0bc.jpg -- KentN Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 293014
  - 12
    - Office 2007 Professional vs. Home Hi all - I already have Outlook 2007, but now I want to get more of the suite. If I buy the Home edition rather than the Professional version, will I miss out on any Outlook functionality? What else might I miss? TIA, Craig Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 293011
  - 13
    - Inbox in Outlook Exprerss How do I set up an inbox that will be used to receive mail from only one specific domain ? Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 293010
  - 14
    - how I download my name? (Darwin Ribadeneira) How I Download my Name? (Darwin Ribadeneira) Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 293007
  - 15
    - Capabilities of Office Communicator 2007? Microsoft's Deployment Guide for OC 2007 says (p7; asterisks added): "Communicator 2007 provides instant messaging, enhanced presence, and conferencing for the users in your organization who are connecting from inside your firewall. Communicator 2007 also provides several other features that ***you can offer by deploying additional Office Communications Server 2007*** server roles, as described in Table 2. and... Instant messaging, Enhanced presence, On-premise conferencing, Address Book Server... ...No additional server roles required Can I take this to mean that OC2007 can be used for basic functions WITHOUT the need for an Office Communication Server? I'm interested only in basic IM functions, so this configuration would be very appealing. Please help me clarify. Eggy Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 293006
  - 16
    - Programms won't run! Help! My computer runs Microsoft Office 2003. I never upgraded because I was happy with Office 2003, and Office 2007 costs too much. My computer was set up by a family member in a different state, but when I was given my computer by my family member, I was not given the CD-Rom for Office 2003. I never worried, because I never previously had a problem. Now, however, the only Office 2003 program I can get to open and run is Word. Excel, Publisher, Outlook, and Access won't open, and every time I try to open them, I first get an installation dialog, then I get a dialog asking me to insert my Office 2003 CD-Rom. Am I missing updates? Are there any other Office 2003 users that have or had this problem? Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 293003
  - 17
    - insufficient permissions-office diagnostics <sigh> I will try again. When I posted a minute ago, it told me the website was "too busy" and apparently deleted my post, so sorry if I'm duplicating. So, I will RE-TYPE my entire message (thanks, MS). I've installed MS Office 2007 (trial) on my 2 year old Dell. It's been slow. I know, add RAM, which I will do. However, tried to run Diagnostics. I'm being told that I cannot because I do not have "sufficient permissions" to do so. That I need to access the Windows event logs. However, I'm the only user on this computer and I'm set up as the Administrator, so I *should* have full permissions. I even tried to reconfigure via Control Panel/User Accounts, but there was nothing I could change. Help. Please. Frustration is setting in. Rapidly. Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 293002
  - 18
    - How to move back and forth in large documents? After confident use of Office 2003 for editing long documents and Master document I find there is little or no help on this in Office 2007. I am puzzled as to how poor the search for help is in returning relevant information. Searches for advice on moving around long documents produce 100 items of mostly irrelevant information, or unhelpful suggestions about scrolling. Although both a Forward and Back button appear to exist they don't actually seem to work. Does anyone have suggestions about how to make this easier? Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 293001
  - 19
    - trebuchet MS font won't save to PDF from Word We're a print service provider and we get a lot of files in Word 2003. When I create documents using Trebuchet MS and then save them as PDF the font does not embed. I have the Embed all fonts checked as well as all subset fonts checked. I've also checked that the actual font is listed in the "Always Embed" column when saving to a pdf. Any ideas?? Also, when my clients send me Word documents using Trebuchet MS also, they have the same issue with saving them to PDFs and the font embedding. HELP, this is driving us nuts. Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292999
  - 20
    - Changing hyperlinks in lots of Word documents (batch) I have a ton of Word documents that have the names of document references set up as hyperlinks. For a printed technical report, I need to change each of the hyperlinks to the document reference followed by the URL. To hopefully clarify: Now: <hyperlink and document ref.> --> Want: <document ref.> (<URL>) So, I need a way of finding the hyperlinks in those Word documents, extracting the URL from the hyperlink, making the reference no longer a hyperlink, and appending the URL after the document reference. Is there a way to do this programmatically (or in quantity/batch) vice manually and individually? Thanks, Alan Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292992
  - 21
    - Merging lots of Word documents (batch) Is there any easy way to append (stick together in sequence) a whole bunch of Word files, and avoiding doing this manually and individually? Thanks, Alan Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292991
  - 22
    - how do I get office reloaded after a destructive reload? I bought office 2007 and downloaded it direct to my laptop a couple months ago. Yesterday my laptop froze and then I got a blue screen telling me a probem involving a kernel caused my computer to be shut down to avoid further damage. It could not be restarted again without resorting to a full destructive reload. Now I want to know what I can do to get my office 2007 back without repurchasing it. Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292984
  - 23
    - Changed MDI file Association to Acrobat Reader I have an end user who was trying to open a MDI file. It would not open because Micorsoft Document Image Writer was not installed. My little end user decided that it could be "opened with" Acrobat Reader so he tried that with the option to "always use this program" when opening this type of file selected. When that didn't work he asked me to fix it. Now that I've installed the MDI options for him I need to associate the .mdi files with the Microsoft Document Image Writer program again. Does anyone know which file (.exe) I should tell Windows to use to open these types of files? He is using Office 2007. Thanks for any help. Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292983
  - 24
    - trouble uninstalling Office 2007 trial My new laptop came with a trial of Office 2007. I used it for 60 days and have decided not buy the full version. How do I uninstall the program? I went to the control panel, etc. to remove it, but after trying to unistall it came up saying the uninstall did not complete successfully. How do I remove it from my computer? I'm running Windows Vista. Thanks. Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292978
  - 25
    - Clip Organizer Problems I recently upgraded 200 computers from Office XP to Office 2007. On many of them, there is no Clipart. In the Clip Organizer, My Collection doesn't even show up. I have tried to run the Add Clips to Organizer, Automatically but the next dialogue box doesn't show up, so it doesn't run and doesn't ask me where to look for clipart. Physically, all of the clipart is still on the system. I have tried reloading the clipart for the Media CD in Office XP. I have done a detect and repair from within Word and from within the Clip Organizer as well, but these still did not solve the problem. If I am in the Clip Organizer, the only Collection that shows up is Web Collection but if I click on it I get a message "Failed to Browse Collection. Class not registered. Error Code 0x80040154" Any ideas? Thanks Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292975
- Next
  - 1
    - Word and Excel won't close on "X" Using Office 2007 on Windows XP. Word and Excel won't close when I click the "X", but File->Exit works as well as right clicking the application on the start bar and then clicking close. Any ideas? It doesn't seem to be consistent among the users, I've also seen this happen to Outlook. Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292974
  - 2
    - Open Emails I have outlook on my home and office comupter. It is only suppose to open emails after I run send and receive. The home computer is opening every email automaticaly? What is wrong Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292972
  - 3
    - Executing Built in Office 2007 Controls In Office 2003 you could find a CommandBarButton control and call its execute method. Is their an equivalent in Office 2007 for executing a command from its Office id? -- Thanks Adrian Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292971
  - 4
    - Office 2007 repurposed Commands Greying problem I want to enable and disable some of the built in commands on the Fluent UI toolbar in Microsoft word. Now I am having some trouble getting a built in command to be Invalidated so it calls its repurposed enabled routine again. so I set up an addin to load a fluent xml with a routine to pick up the Enabled status <command idMso="BulletsGalleryWord" etEnabled="SCommandEnabled" /> Now it calls the SCommandEnabled routine when the xml is first loaded and sets the enabled status a treat. now if I try to invalidate the control using m_Ribbon.InvalidateControl ("BulletsGalleryWord") it does not cause the Command to reread its values like it does for a user control. Is there a built in ribbon variable I can use to cause the invalidate or is this a bug and I have to invalidate the whole of my ribbon? -- Thanks Adrian Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292970
  - 5
    - Corrupt .CAB file on Office XP I have had to re-format my disk and re-install Windows XP and Office XP. Win XP was no problem, but when I try to load Office XP from the disc, I get a message saying "Error 1335. The cabinet file 'Office1.cab' required for this installation is corrupt and cannot be used." I had no problem loading it the first time - about 18 months ago - so cannot understand why I now have a corrupt file on the disc. How can I get around this ?? I cannot get past this message and cannot load any programs from Office XP -- Ricky Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292969
  - 6
    - Source text in a translation is invisible "My question is very specific. I translate documents using SDL TRADOS, where I get a file which contains both the source as well as the target text shown in two different colours. At times it so happens that the source text is invisible or hidden, in which case when I had the version 2002 of MS word earlier, I would simply go to TOOLS>>OPTIONS, select the VIEW tab, check the option "View Source text" and confirm by clicking OK and the source text would be visible right away. However with MS word 2007 (I upgraded recently), I dont see any such setting. So what do I do if the source text is invisible and only the target text is seen in a translation?? Thanks in advance Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292968
  - 7
    - password protection Anyone out there, that can help me protect a ''folder'' with a password (not encrypt) Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292965
  - 8
    - How can I make a list in alphabetical order ! Hi I was wondering if it's possible to make a list of DVD in alphabetical order With Office. Thanks Guy Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292962
  - 9
    - printing background I have created a word document using microsoft word 2003. In it I selected the background to have a texture of water droplets. The document shows the droplets while I am working on the page but does not show them in the print preview screen and does not print the background either. What do I need to do to be able to print the background effect I want? Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292951
  - 10
    - Office for Mac Product Keys? Can I use leftover product keys from Office for Mac 2008 Home & Student Edition with the Windows equivalent? I've got 2 unused product keys that won't get used at all, because I don't plan on buying another Mac soon. I don't plan on buying another Mac because we don't need anymore computers. Anyways, can Office 2008 for Mac Home & Student Edition product keys be used Office 2007 Home & Student Edition? Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292950
  - 11
    - =?Utf-8?Q?for_tidligt_udl=C3=B8bet_pr=C3=B8veversion?= hej. jeg har endelig fÃ¥et aktiveret min prÃ¸veversion af officepakken. Der stod, da jeg var fÃ¦rdi med at installere, at prÃ¸veversionen udlÃ¸b d. 31 juli. problemet er bare at versionen er allerede udlÃ¸bet, og jeg kan ikke bruge nogle af officeprogrammerne. jeg skal allerede til eksamner pÃ¥ mandag, sÃ¥ dette er MEGET VIGTIGT. Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292947
  - 12
    - how can i tell how many dpi a picture is? I need to be sure that I have a jpeg that is at least 300 dpi. How can i tell? Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292946
  - 13
    - what causes my mail server to change in Outlook 2007 My mail server changes to my domain name instead of using the default settings I have set on my hosting email provider? This just happens periodicly causing my mail to show a delivery error? Outlook 2007 Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292944
  - 14
    - Is there a way to save and lock/secure a file or folder? Can I create a word doc, or spreadsheet, etc, and save it in My Docs, or anywhere, and do so with a password to lock or secure the document? Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292940
  - 15
    - can office 2007 32 bit, work on a 64 bit computer can office 2007 32 bit, work on a 64 bit computer? Thanks Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292936
  - 16
    - Office online forum emailed links do not work. Only produce blank When I have posted questions in these forums and requested to be notified by email when someone has responded the links always fail. Here is an example: I saved the link as target to copy and paste here. This was the link in my notification email ("Read and rate the response") I was to follow to view the answer to my question ---> http://www.microsoft.com/wn3/aspx/threadnotify.aspx?dg=microsoft.public.access.queries&ttype=1&rsub=1&tid=9ae78b2e-9407-44ba-bf86-541d03a1168b&url=http%3a%2f%2fwww.microsoft.com%2fwn3%2faspx%2fnotifauth.aspx%3furl%3dhttp%3a%2f%2fwww.microsoft.com%2foffice%2fcommunity%2fen-us%2fdefault.mspx%253fdg%253dmicrosoft.public.access.queries%2526mid%253d9ae78b2e-9407-44ba-bf86-541d03a1168b&signupurl=http%3a%2f%2fwww.microsoft.com%2fwn3%2faspx%2fthreadnotify.aspx&subtype=3&tname=How+to+add+my+own+functions+to+access+2007%3a+to+select+in+%22build%22+ <<------------the above doesn't work when posted into the address bar------>> This is the link if I copy the email message into a new message and view the source code: ----> http://www.microsoft.com/wn3/aspx/notifauth.aspx?url=http://www.microsoft.com/office/community/en-us/default.mspx%3fdg%3dmicrosoft.public.access.queries%26mid%3d9ae78b2e-9407-44ba-bf86-541d03a1168b <<---------------- This link works when copied to address bar---------------->> Now here is the actual link when I went to office online and searched out the correct thread ----> http://www.microsoft.com/office/community/en-us/default.mspx?query=How+to+add+my+own+functions+to+access+2007%3A+to+select+in+%22build%22+&dg=&cat=en-us-office&lang=en&cr=US&pt=3a4e9862-cdce-4bdc-8664-91038e3eb1e9&catlist=&dglist=&ptlist=&exp=&sloc=en-us I have this problem with every notification sent to me by office online, the second link to "click this link to continue receiving notifications for this thread" has the same problem. Just thought someone would like to know this since it is frustrating not to be able to just click on the link supplied. Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292930
  - 17
    - Adding an Outlook "Contact Card" to a website This is actually a website question, but I figured since it works with Outlook features I'd see if anyone here may have some ideas... I'm looking for a way to put a 'virtual card' of sorts on a website. What I want is a link, and if you click that link it will give you the option of saving some information directly into Outlook Contacts. (Essentially like sending a contact via e-mail, but over the web instead). Does anyone know a good way to do this? Is there a way to save a contact information into a file; and if so, how would I go about saving it into Outlook? Any help or thoughts on this would be greatly appreciated. Thank you. Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292925
  - 18
    - Auto complete date is wrong Hello all, I have Office 2000 installed on a PC with Windows 2000. The problem is when Word's auto complete comes up it shows the wrong date. I checked the time, date, and time zone for the PC. It's all correct. Any ideas on why this is happening and how to fix it? Thanks, Debo Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292924
  - 19
    - Licenses I have the Home & Student version of Office 2007, and I have used two of the licenses. I need to do a complete system restore to go back to all the factory settings. I wanted to know if I reinstall Office, will it use my remaining license, or will it recognize the computer and not use the last license? Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292923
  - 20
    - Tracking changes solution to version 2007 problem I was having a big problem with Word because while it was letting me save my Word docs with the tracked changes hidden, *unbeknownst to me* it was showing them to the recipient when s/he opened the document! So I just posted a suggestion a while ago that Microsoft should have a dialog box ... Well, turns out they sort of do. Go to Word options, then Trust Center, then Trust Center Settings, then Privacy Options, and under Document-specific settings, check the first item (â??Warnâ?¦â??). I tested it and even though it says its document-specific, it carries over to old and new docs, too. Unfortunately, it queries you for every save, but for me thatâ??s a small price to pay for controlling when my changes are and are not revealed. I hope this is helpful to someone! -- hammar2007 Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292922
  - 21
    - Chain Install question for Office 2007 I noticed for previous Office version, there is a OHotFix file where I can then do chain installations of updates and other programs after the main office installation. Does Office 2007 have such a file (or can I use the OHotFix file)? Thanks. Ngan Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292919
  - 22
    - Office 2007: Folder views I'm using office 2007 sp1 on vista business sp1 Whenever I attach a file or conduct a file save or file open, the explore like dialogue box opens, but always with the 'list view' This drives me insane as you have to look left then right then left then down etc to look for the file you want What I prefer is 'details, which always lists the file in alpha order I know how to change the view once it's open, but how do I change the default view, so that it always opens in 'details' view? Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292917
  - 23
    - User has disabled hyperlinks in Help Menu for Office 2003 I have a user who has some how turned off the ability to click on hyperlinks in MSOffice2003 Help menu. The links appear but she cant navigate the links either by clicking on them or CTRL clicking. I can't find any documentation for correcting this problem Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292913
  - 24
    - Newsgroup process is outrageously frustrating! I just spent a half hour in a big loop trying to do a fairly trivial thing in one of these Office newsgroups. I had posted a question and wanted to be notified of any replies. But, the problem that I was working on had to do with one of my e-mail accounts and Outlook, unfortunately, the e-mail account that would receive the notifications. Needless to say, I wouldn't be able to get them. So, I elected to edit my profile (little button on the right next to the Help button). This offers the option of changing the e-mail address to which the notifications are sent. So, I did that. But, in order to complete this change, Microsoft would send a verification message to the new address and I would need to click on a link in that message to verify. I received the verification message and clicked on the link. In Internet Explorer, the link led to a page that said : "Unknown Error. An unknown error occurred while processing your request. This is most likely due to a connection failure. Please try again." Being the patient guy that I am, I did retry maybe a half a dozen times over a couple of days, always with the same result. The original verification e-mail has some comments about dealing with problems in the process. I tried them all without success. So, finally, it says "If you continue to have access problems or want to report other issues, pleas Contact Us." The Contact Us is a link to a Microsoft Support page. But, this is a generic Microsoft Support page that begins its own long course into identifying for which Microsoft product I am requesting help. A long list, what should I pick?? I elect to pick Windows. After another long process it decides that I must pay for this help. HELP!!!! Is there a Microsoft ombudsman that I can petition?? I am tempted to buy a Mac! Jim Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292909
  - 25
    - How to convert office 2007 documents to 2003? I've been using the trial version of Office 2007 and I prefer the 2003 version. Now the trial is over and it seems I cannot alter/print documents in the 2007 version. How can I activate or convert these documents if I don't purchase 2007? Tag: How do I move a current version of Office 2007 to a NEW computer? Tag: 292895

I have a current, retail(3 users)versionof Office 2007. I want to move 1 copy
to a new computer, and disable and discard the old computet. Can I do this,
and how?

Re: How do I move a current version of Office 2007 to a NEW computer? by DL

DL
Sat May 03 11:56:26 PDT 2008

Uninstall on old, reinstall on new. Use phone activation if on line fails

"Brian" <Brian@discussions.microsoft.com> wrote in message
news:75FE9F0E-80CB-4E07-AD87-87C517DD55AF@microsoft.com...
>I have a current, retail(3 users)versionof Office 2007. I want to move 1
>copy
> to a new computer, and disable and discard the old computet. Can I do
> this,
> and how?

Re: How do I move a current version of Office 2007 to a NEW computer? by Jay

Jay
Sat May 03 12:24:54 PDT 2008

On Sat, 3 May 2008 10:45:02 -0700, Brian <Brian@discussions.microsoft.com>
wrote:

>I have a current, retail(3 users)versionof Office 2007. I want to move 1 copy
>to a new computer, and disable and discard the old computet. Can I do this,
>and how?

There is no "deactivation" in Office. Just use Control Panel > Add/Remove
Programs to uninstall the copy from the old computer, then install from the
original disk on the new computer. When you activate the new installation, if it
says you've already used all your licenses, call the phone number in the dialog
and explain to the Product Support representative that you're moving the
license.

--
Regards,
Jay Freedman
Microsoft Word MVP FAQ: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit.