DNS question

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - windows 2k login prompt or how I screwed up. I mistakenly posted this in the microsoft.=ADpublic.=ADwin2000.=ADgeneral before I found this group, sorry about that. Hi, We only run workgroups on our network, we do not have a domain. The other day the boss asked me to change the network settings so that all computers would be on the same workgroup. At the end of the day I had one more computer to go, I was in a rush and accidently set it to a domain. Now when the computer boots up, the administrator login requires a password and a domain to connect to. I want to get this computer network settings back to using workgroups. How do I do this? I have tried safe boot but no luck. Your help is greatly appreciated. thanks Bradley Tag: DNS question Tag: 233621
  - 2
    - Proxy server I have a windows 2000 web server which works fine for the last 5 years. This server gives access to the internet for 10 windows xp workstations through a proxy server. The problem is that some applications do not work because they need direct access to the internet. I have tried several times to setup the NAT service but the result was awful and I had to setup the server from the beginning. Can someone help me to solve this problem? Tag: DNS question Tag: 233619
  - 3
    - Brower error in Event Viewer! Hi! I have 3 Windows 2003 Severs: 1) Domain Controller 2) Exchange Server 3) File Server I get this event logged in the System category of Event Viewer for around 10 times a day on the exchange Server and the file server. Iam still hunting for an answer. Has anybody come across this error- if so pl pass me the solution. Iam looking to have an error free event viewer and Iam pretty much close to it. :) Event Type: Error Event Source: BROWSER Event Category: None Event ID: 8032 Date: 10/22/2007 Time: 3:05:15 PM User: N/A Computer: SGP002 Description: The browser service has failed to retrieve the backup list too many times on transport \Device\NetBT_Tcpip_{603B36A7-1DB4-466F-8FF9-83A24BD2204E}. The backup browser is stopping. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 7a 00 00 00 z... Thanks in advance Regards Harry Tag: DNS question Tag: 233616
  - 4
    - My file sharing in My LAN is very occasional Hi, I have a Wireless LAN with three computers all running Windows XP Pro SP II. All comuters have full firewall, Windows Firewall is on with excceptions allowing access to shared files within my local network. The computers keeps getting and loosing the access to shared files all the time. E.g. when I want to copy a group of files from a computer to another, the copying is interrupted saying that the access to the other PC is gone ... Can nay one explain this behaviour and tell me how to get rid of it? Ragards, M Shafaat Tag: DNS question Tag: 233612
  - 5
    - Windows 2000 port filtering Hi Guys, We have a Windows 2000 IIS box that used to be hosted offsite but is now on our office connection. We have tried to enable RDP through its LAN interface (which was disabled, but we have now turned on) however it does not work. The LAN interface allows the IIS box to ping all our local machines by IP address, but telnet and all other types of RDP/Remote Control apps do not work. The IP filters and IPSEC stuff is all empty (not enabled) under the properties of TCP/IP for the network card, so I am wondering if this is possibly enabled through the registry. Also, there does not appear to be any software based firewalls and what not on the server so it will be nothing to do with 3rd party software. Thanks in advance. Tag: DNS question Tag: 233611
  - 6
    - Windows 2000 port filtering/blocking Hi, We have a web server that was previously hosted offsite, but is now on our office connection behind a seperate firewall. It has two nics, one of the WAN and one for the LAN, but the LAN nic was not connected to anything for security reasons. We now have connected the LAN nic temporarily to allow RDP access to the web server from our LAN, but this is not working. We can ping the LAN address of the web server, and the web server can ping our LAN, but for whatever reason, RDP wont work. We have removed and re-installed it, but no difference. I have also tried thrid party utilities for remote control of the system but these wont work either. It seems the web server only allows ping traffic to pass over the lan interface to our network (not even telnet works). The IP filtering and IPSEC settings for both network cards are empty, so I am wondering if there are any registry keys or similar that could be blocking this traffic? Thanks in advance for your help. Tag: DNS question Tag: 233610
  - 7
    - adding local printer Hi, I want add a printer as a local printer in computer with out any driver CD (The windows XP also doesn't have the driver). But, the same printer is already added as a local printer in one of the computer in the network. i.e If computer1 has a local printer in the network, I want to add the same printer type in computer2 in the same network as local printer (not as a network printer) and the driver should be taken from the computer1. Please give me the suggestion. Thanks, Prabu. Tag: DNS question Tag: 233603
  - 8
    - HP Desktop for sale! Hi, I have an unused HP Pavilion with the fallowing specs: # Processor: AMD Athlon 64 X2 4000+ (2.1GHz, 2000MT/s System Bus) # Memory: 2048MB PC2-5300 DDR2 SDRAM memory (2x1GB) (expandable to 8 GB (4 x 2 GB) (64-bit OS)/ 4 GB (4 x 1 GB) (32-bit OS)) # Hard Drive:320GB 7200RPM SATA 3G (3.0 Gb/sec) hard drive # Optical Drive: 16X DVD(+/-)R/RW 12X RAM (+/-)R DL LightScribe SATA drive # Expandable Drive Bay: HP Pocket Media Drive bay # Video Graphics: Integrated graphics # Network Interface: Integrated 10/100BaseT network interface # Sound: High Definition 8-channel audio # Fax/Modem: 56K bps data/fax modem # Operating System: Genuine Windows Vista® Home Premium This is "used" but basically brand new (it has literally been on for no more than 6 total hours..) is only 1 month old.. PRICE: $425 OBO Email- pbdude911@yahoo.com Tag: DNS question Tag: 233601
  - 9
    - Watch NFL Games Online Watch NFL Games Online! For every one who wants to watch the games online because they dont live in the teams town or are at work i found a site that has basically every game covered. Its perfect if you have afford a monthly $70 direct tv nfl access subscription. they got a bunch of channels The sites http://nflonline.wizhoo.com Tag: DNS question Tag: 233600
  - 10
    - Fatloss computer program I have been using this computer program for a couple weeks now and i am very pleased with the results so far. its a software fatloss program, if your looking for a diet/weightloss plan i reccomend you check this place out first: http://fatloss9.50webs.com Tag: DNS question Tag: 233599
  - 11
    - error ID 1000 Windows cannot obtain the domain controller name for your computer network. Return value (59). this is a dual homed domain controler. It has exchange and is the internet router for this company. They have 8 domain controlers that are site to site vpn's I have checked the binding order on all conrtolers,. I have gone over and over the dns servers on each. I forced Kerberos to use TCP instead of UDP on this controler. Does anyone have any sugustions. Nothing seem to stop this error. Replacation is working fine and the error doesn't seem to cause any problems except mess up the evert log. Tag: DNS question Tag: 233594
  - 12
    - 10x only network hubs I was wondering if anyone knows a source for network hubs like the Netgear FS104. It is a 10x only network hub. For my application, I can not use a 10/100 autosensing hub; it must be a 10M hub. The netgear one is not being produced anymore so I am in need of a replacement of some kind. Roger Tag: DNS question Tag: 233593
  - 13
    - Cannot log in after Win XP upgrade Can someone please help, and explain in idiots language so that I fully understand the solution. At my place of work, I have dual boot system. Windows 98 SE on one, and Windows XP Pro on the other. My computer is connected to the network and both systems did connect, and I was able to log on to the network. I have upgraded the XP system with Service Pack 2. Now, I cannot log into the Network. When I try to set up my Network I/D (using name, password and domain I know to be correct) I receive this message, ...."the security database on the server does not have a computer account for this workstation trust relationship". Nothing has changed on the server, and I am still able to log in on the Win 98 system. I have administrator rights on the XP system, so please tell me what's going on. It's driving me mad. Tag: DNS question Tag: 233592
  - 14
    - My Network Places Hi, I have a small problem with My Network Places on our Windows 2000 Server. The issue is that a PC doesn't appear in My Network Places, ALTHOUGH you can PING the IP address and ALSO the netbios name of the PC. It has me very puzzled. I have even shared printers and mapped drives and they all stay successfully connected. But it will not show up in My network places on the server. The PC, however (WinXP SP2 *firewall off*) can see the sever and all the other PC's in the network fine! Any help would be GREATLY appreciated! Thanks Tag: DNS question Tag: 233584
  - 15
    - Changing network settings. List of servers for this workgroup are not currently available. Thanks for your help in advance..... I have a laptop that does not seem to be able to see the other computers in our workgroup. I get an error The list of servers for this workgroup in not currently available. When I check the ipconfig /all and compare to my other computers I find a couple of issues. Node type = Peer-Peer IP routing Enabled = No How do I change these settings? Thanks Tag: DNS question Tag: 233577
  - 16
    - Event Viewer Anomoly I run the company and need to pay attention to technical matters. I examined the event viewer. What is have listed below are shorted version of the event. My impression is the event viewer should be relatively clean. I asked the Sys Admin to fix these issues. That was weeks ago. Am I overreacting? I'm thinking the network should be without blemish. We're using IP addresses to map over the Wan and I prefer FQDN. I told the Sys Admin it's only three servers and 25 computers -and it shouldn't be too esoteric to fix things. Anyway have a look at these persistent events and let me know if I'm too concerned. Event Type: Error Event Source: NETLOGON Event ID: 5775 Deregistration of the DNS record '_gc._tcp.Warehouse._sites.laeyeworks.com. 600 IN SRV 0 100 3268 LADC1.laeyeworks.com.' failed with the following error: DNS operation refused. Event Type: Error Event Source: NETLOGON Description: The File Replication Service is having trouble enabling replication from EYEWORKS-BDC to EYEWORKS-PDC2 for c:\winnt\sysvol\domain using the DNS name eyeworks-bdc.laeyeworks.com. FRS will keep retrying. Following are some of the reasons you would see this warning. [1] FRS can not correctly resolve the DNS name eyeworks- bdc.laeyeworks.com from this computer. [2] FRS is not running on eyeworks-bdc.laeyeworks.com. [3] The topology information in the Active Directory for this replica has not yet replicated to all the Domain Controllers. Event Source: DNS Event ID: 4004 Description: The DNS server was unable to complete directory service enumeration of zone .. This DNS server is configured to use information obtained from Active Directory for this zone and is unable to load the zone without it. Check that the Active Directory is functioning properly and repeat enumeration of the zone. The event data contains the error. Event Type: Error Event Source: NTDS KCC Event ID: 1311 Description: The Directory Service consistency checker has determined that either (a) there is not enough physical connectivity published via the Active Directory Sites and Services Manager to create a spanning tree connecting all the sites containing the Partition CN=Configuration,DC=laeyeworks,DC=com, or (b) replication cannot be performed with one or more critical servers in order for changes to propagate across all sites (most often due to the servers being unreachable). For (a), please use the Active Directory Sites and Services Manager to do one of the following: 1. Publish sufficient site connectivity information such that the system can infer a route by which this Partition can reach this site. This option is preferred. 2. Add an ntdsConnection object to a Domain Controller that contains the Partition CN=Configuration,DC=laeyeworks,DC=com in this site from a Domain Controller that contains the same Partition in another site. For (b), please see previous events logged by the NTDS KCC source that identify the servers that could not be contacted. These are the most glaring examples. It's just over the wire, a Wan, office to factory, a three mile distance. With such a tiny network I'd think our SysAdmin could easily correct these anomalies. Thanks Mark S Tag: DNS question Tag: 233576
  - 17
    - test page failed to print for tcp-ip I use a Windows 2003 Standard server (dual Xeon processor with 4 gb RAM) with Exchange Server, Terminal Server and Oracle server installed on it. Since this morning I can not print on all my network printers (TCP/IP-printers). Error: test page failed to print (on applications I've got the message that there can not printing because a problem with printerconfiguration) The printspooler works normal, printers on LPT1 works. The netwerk printers work also normal, I can print from a workstation connected to one of my network printers i reinstall driver: same error I reinstalled the TCP/IP print Server: same error I have this problem with different printers (Brother, HP) There is nothing in the event log Can somebody give me a tip to solve this problem thanks Eric Tag: DNS question Tag: 233570
  - 18
    - Windows 2003 Service Pack 2 Issue I just updated my server with service pack 2. Upon reboot I got "destination host unreachable" on every ping unless I pinged the IP of the server itself. I also got a message stating that my 1394 adapter had an IP that was in conflict with my local area connection 1. I disabled the 1394 but still can;t browse the network or Internet, and can't ping any node except myself. Any ideas? Tag: DNS question Tag: 233569
  - 19
    - XP Networking here too? I can't see a newsgroup for Windows XP networking, other than Netherlands (nl) and Japan (jp) and -web. Is this newsgroup appropriate for LAN queries with XP machines? TIA Paddy Tag: DNS question Tag: 233566
  - 20
    - NetStat question Good Afternoon. I have Windows 2000 Server, Service Pack 4, When I excecute the DOS command netstat or netstat -a or other netstat command I just get Active Connections Proto - Local Address - Foreign Address - Stat I do not see the actual results of the command. I have other windows boxes and they work fine. Tag: DNS question Tag: 233562
  - 21
    - Network printer Hi gurus I have windows 2000 server, I installed a printer using its ip address, everything is fine, from the server I can print a test page and comes out ok, now that I want to installed the printer into the workstation there is a + sign right beside the server in which the printer has been isntalled but when double click nothing opens, Can someone help on this please. Thanks a bunch Tag: DNS question Tag: 233558
  - 22
    - Mapping in a Profile Hello All, My LAN consists of a Domain Server and its clients. There are shared folders on the server for each user, which the user maps on the client login where he/she logs in. How can I map these individual shares as per the concerned login? Eg: Username: ABC Username: XYZ Shared on the server: D:\ABC D:\XYZ If ABC logs in on any computer, his profile should automatically map the server's \\ABC as his local X:\ and if XYZ logs in elsewhere, his profile should automatically map the server's \\XYZ as his local X:\ Thanks in advance Dev Tag: DNS question Tag: 233556
  - 23
    - Confusing WIndows 2003 RDP Issue I have a client at a remote site. They are part of a domain called domain "1" that is physically located somewhere else. They use a printer called "printer x". That printer is managed by "server3" in "domain 1". They connect to a server to use an application via rdp that sees this networked printer on their domain. The actual printer, however, is located in their office. When they connect to another domain's server for a client they do billing for they want to be able to use that printer as well. But the problem is: 1. that printer is not physically connected to their machine so it won't be seen as a client printer 2. the printer is networked and shared on another domain. My question is would it be possible to use that printer when they use RDP to connect to another server in a different domain? Keep in mind that on their local machine that printer does come up under printers as a network printer. Tag: DNS question Tag: 233554
  - 24
    - Network Identification Tab missing in System Properties I'm trying to set up an old laptop for use in a field office. It's currently configured to run on the office domain, but I need to configure it for a workgroup. When I open System Properties, however, the Network Identification tab is missing where I would make the change. I am logged in with administrator rights and all networking components are installed. What is the problem? Tag: DNS question Tag: 233553
  - 25
    - ENJOYING WEBSITES at fit4money@gmx.net ENJOYING WEBSITES at fit4money@gmx.net Hello friends, I got good Websites from fit4money@gmx.net For Interest send an Mail to fit4money@gmx.net For All kind of Interest. Greets, Mike Tag: DNS question Tag: 233550
- Next
  - 1
    - DNS and WINS I have two domain controllers. The first one went down about a month ago. It served as the primary WINS server. Around this same time one of the applications we use started to get really slow especially during printer operations. Under network settings user's systems were changed to the secondary DC since all the stations were set to look at the primary DC for DNS. This hasn't changed anything, and I also see a DNS error in the event viewer. It looks as if the system is trying to transfer information between the primary and secondary DC. That's fine since the primary is down. I would expect that. What I can't figure out is what is causing this slowness. ANy ideas? It's a mostly Windows 2003 environment with XP clients. Tag: DNS question Tag: 233549
  - 2
    - Are NICs the gate... or is it the Fiber...? Howdy, I have a LAN that includes a 150 meter run of fiber optic line. Right now, on each end, our (Win 2000 and XP) systems talk to each other over that line using 100mbps NICs. Mostly, we use that remote system to store images of the systems in our office, and so, the files are sometimes on the order of 20 gig in size. As you would guess, it takes a while... If we went to 1000mbps NICS, would we see faster speeds, or would the fiber (or something else) be the gate. Thanks for any thoughts on this, -- Kenneth If you email... Please remove the "SPAMLESS." Tag: DNS question Tag: 233546
  - 3
    - What "Use a proxy server for your LAN" setting means? Hi All, In IE Connection-->LAN_Setting Setting, can someone tells me what "Use a proxy server for your LAN" checkbox means without setting Address and Port (and if you click on Advance, everything is blank)? That's how it's set in my work place. Thanks, Homer Tag: DNS question Tag: 233544
  - 4
    - migrate dhcp service from win 2000 server to win 2003 server Dear all, thanks for your help. Current config: Windows 2000 server sp3 with DHCP service enabled: - mulit scope has been created for different ip subnet. (no superscope created) - ip helper address is use in our core cisco switch to let different subnet's pc to get ip address from their own vlan/subnet correctly. Right now, I need to migrate the DHCP service to a new installed Windows 2003 servers. I will install two win 2003 sp1 with DHCP service enabled for load blancing and to prevent dhcp out of service if one of server was down. Can I move the win 2000's dhcp db to windows 2003 server? Or I have to re-created it in both new win20003 server? For more than one DHCP server in the same subnet, I have read the best practice doc http://technet2.microsoft.com/windowsserver/en/library/75cd0e1f-f464-40ea-ac88-2060e6769f331033.mspx?mfr=true It mention that I should use supercopses when create scope for each subnet and assign ip range 50/50 on each dhcp server: Please correct me if my understanding is not correct, I did the following: 1st DHCP server: - create scope for each sub. Eg. subnet 1 IP Range 192.168.0.2-254/24 Gateway is 192.168.0.1 Exclude: 192.168.0.130-254 subnet 2: IP Range 192.168.1.2-254/24 Gateway is 192.168.1.1 Exclude: 192.168.1.130-254 Create a superscope:SCOPE1 and assign scope subnet 1 and 2 to the superscope SCOPE1. 2nd DHCP server: - create scope for each sub. Eg. subnet 1 IP Range 192.168.0.2-254/24 Gateway is 192.168.0.1 Exclude: 192.168.0.2-129 subnet 2: IP Range 192.168.1.2-254/24 Gateway is 192.168.1.1 Exclude: 192.168.1.2-129 Create a superscope:SCOPE1 and assign scope subnet 1 and 2 to the superscope SCOPE1. Does the above steps correct? How about the reservation? Should I create same reservation entry on both DHCP server? Does the reservation still work If one of DHCP server was down? For the old win2000 dhcp server, ip has been lease to a lot of pc. Can I just stop the dhcp in the old dhcp server and start the dhcp service on the 2 new dhcp server? Any error when client pc's lease time expired? Can they renew the ip from the new DHCP server without error and delay? Thank for your help Regards, Patrick Tag: DNS question Tag: 233543
  - 5
    - Network Icon Speed differs from what I set to Hello: Using windows 2000 server, SP4. If I change the property "Speed & Duplex" under 'Configure, Advanced' to 10mb full/half, 100mb full/half and then restart my computer. When I hold the mouse over the network icon in the system tray the speed ALWAYS says 1.0 Gbps. How do I know if the change in speed/duplex is taking effect. Thanks Tag: DNS question Tag: 233539
  - 6
    - LAN 2 Computer workgroup trouble Both computers run Win2KproSP4 with latest updates and have been working fine until now.. Desktop name "Mpc545" and Laptop name "GX3" are connected through a Netgear Switch to a cable modem and then on to the Internet, which works fine on the Internet with either or both.. (Mpc545) My Network Places> Computers Near Me> "(X) Workgroup is not accessible" "The list of servers for this workgroup is not currently available" However a Search> finds GX3 in location Workgroup and all files are accessible from Mpc545. (GX3) My Network Places> Computers Near Me> Icons GX3 and Mpc545 show up o.k... Click on Mpc545> "(X) \\Mpc545 is not accessible" "The network path was not found" A Search> finds Mpc545 in location Workgroup, but click on Mpc545> "Mpc545 is not accessible" "The network path wasn't found" I recently Installed "RegCure" on the GX3 Laptop, which may have caused this problem???? Tag: DNS question Tag: 233537
  - 7
    - How can i configure router in Win2000 SERVER? i 'm using windows 2000 prof for VSAT but i formatted my HDD how can i reconfigure router? Tag: DNS question Tag: 233536
  - 8
    - Registry Value for Network Adaptors I have windows 2000 pro and I installed a Belkin Wireless N Notebook Card on my PC. The problem is that the networking utility that was installed with the card is not showing any available connections in it...even though the card is connecting as it should. This problem first started with my old wireless G notebook card..this is why I bought the N. It appears to be a problem with the computer, not the networking utility. I noticed in the registry under network adaptors ({4D36E972-E325-11CE-BFC1-08002BE10318}), it is not installing a new registry key for the wireless N card. I'm assuming it should be. Can anyone tell me why this might be? Thanks -- fmanko Tag: DNS question Tag: 233531
  - 9
    - Major problem with hostname resolution in Win2K Hi, I'm having a terrifically difficult time getting the hostname of my win2k computer to resolve to the correct, external IP address (as opposed to 127.0.0.1). I think it's a Win2K problem, Here's the issue: I'm using java to display the network interfaces and their names on two identical Dell Latitude D800 Win2K systems. The (undesired) result I'm getting on one system is as follows: Interface: MS TCP Loopback Interface Canonical Name: Chris <---- computer name hostAddress: 127.0.0.1 Interface Broadcomm NeXtrem Gigabit Ehternet Driver Canonical Name: 192.168.12.20 hostAddress: 192.168.12.20 On another system called "Rock", I get the desired result, with the exact same code: Interface: MS TCP Loopback Interface Canonical Name: 127.0.0.1 hostAddress: 127.0.0.1 Interface Broadcomm NeXtrem Gigabit Ehternet Driver Canonical Name: Rock <---- computer name hostAddress: 192.168.12.40 Anyone know what could cause this behavior? I've tried just about everything. I think I'm going to have recode around this nasty bug. That means I'll have to modify some complicated, inherited spaghetti code, instead of a hoped for tweak. I've tried a bunch of things already (modifying hosts, lhmhosts, disabling dns lookup service, ipconfig /dnsflush /registerdns, enabling LMHOST lookup, changing the system name, searching through the registry for computer name and 127.0.0.1). As far as I can tell, all the relevant settings between the two systems are identical. Any help would be vastly appreciated! ps: java code used to display this output: import java.net.*; import java.util.*; public class GetPublicHostName { public static void main (String args[]) throws Throwable{ System.out.println("abc"); NetworkInterface iface = null; for (Enumeration ifaces = NetworkInterface.getNetworkInterfaces(); ifaces.hasMoreElements();){ System.out.println("efg"); iface = (NetworkInterface)ifaces.nextElement(); System.out.println("xInterface:" + iface.getDisplayName()); InetAddress ia = null; for (Enumeration ips = iface.getInetAddresses(); ips.hasMoreElements();){ ia = (InetAddress)ips.nextElement(); System.out.println(ia.getCanonicalHostName() + " " + ia.getHostAddress()); } } } Thanks! Tag: DNS question Tag: 233527
  - 10
    - active driectory authentication from linux openldap how can active directory based users be authenticated from linux openldap server. Tag: DNS question Tag: 233524
  - 11
    - Internet Connection Problems Hello, I'm building a mini/small data center or server network to study & practice network/system administration practices. I have a 3Com OfficeConnect Router (3CR860-95) & a 3Com OfficeConnect Switch (3C16792/16-port). I have 1 Dell C600 (Windows NT SP5), 1 HP Compaq nc6000 (Windows XP SP2), 1 Dell Precision 610 (Red Hat 8), 2 Dell PowerEdge 2400 w/2 NICs (Windows 2000 Professional) 1 Dell PowerEdge 2400 w/2 NICs (Mandrake 2007), 1 Compaq 5500 (Windows 2000 Server). Every component gets connectivity, but every 3-5 days I am not able to connect to the Internet, or when I login in the morning, I have to wait up to 2 hours to get connectivity. Can someone tell me what is wrong??? Thank you, Charles L. Phillips Tag: DNS question Tag: 233513
  - 12
    - Software for Groups n User List Hi! I have a lot of users and groups in my Windows 2003 Domain. The groups list keeps building up. Is there any software which when run will generate data of No.of Groups and the No.of Users in each Group?? Its quite tedious to double click each group and manually take note of users. Pl suggest. Thanks a lot Harry Tag: DNS question Tag: 233507
  - 13
    - Active Directory Design Hi At work we thought to build a fresh/new active directory with windows 2003 enterprise edition/exchange 2003 and isa 2004. But we have the following doubts: 1. How should we arquitect our active directory based on organization units (need examples and good white papers) A) Should AD / OU be build based on group policy? B) For better jobs assign should the OU be manage by a group of IT team and other OU by other tecnichians? 2. The actuall distribution list allow to a "normal" user add himself to a group at other group that it doesn't belong. How to correct this issue in the this fresh AD? 3. We have some locations with servers but other don't. Should we create a subnet for each location/ip address or just create a subnet where exists servers? 4. How often should sites replicate with each other? 5. Should be the router distributing the dhcp service or should be the server? What is the better choice?... and why. 6. In the actuall network infraestructure how can I see/do tests so I can be sure what was the first PDC to be build in the actuall network design? I hope someone have the patience/courage to help me out on this issues. Good work week, Thanks Ricky Tag: DNS question Tag: 233502
  - 14
    - Internet access with router I have setup a win2k server network with clients mainly on win2k and a couple on winxp. The clients have fixed ip addresses and look for a dns server. For a long time only one client has had internet access using a usb broadband modem. However, I recently tried to install a router and although I could communicate with it across the network, I could not get internet access. Eventually, after speaking to my isp, BT, they gave me 2 dns server addresses to try which gave internet access, but stopped access to the rest of the network from that PC. What should I do?! Tag: DNS question Tag: 233500
  - 15
    - Block Internet Access Hallo! Currently I am using 3Com router. I plan to block Internet access for the LAN users through the router. Initially, I plan to block port 80. Users can still check email through MS Outlook/Outlook Express. Any other suggestion that I need to take into consideration so that Internet access is totally blocked. Danke! Tag: DNS question Tag: 233499
  - 16
    - 2 machines cannot ping each other Hi there, I have 2 machines on the LAN one W2K Pro with no firewall and one XP Pro0 with the firewall off, they have DHCP IPs, same mask and gateway but cannot ping each other by either IP or name but they can ping gateway. If I bring a third machine they can ping it but pinging the 2 machines above or VNC into them, they do not respond. I have a feeling windows is corrupt. Thanks a lot, T Tag: DNS question Tag: 233495
  - 17
    - Laptop rarely shows up in workgroup browser I have a peer-to-peer network with mostly Win2K machines. The master browser is my always-on main work computer running W2K SP4. I have a laptop connected via a wireless router, and the connection is solid and reliable. However, the laptop almost never shows up in the list of "computers near me". I can always open the window into its hard drive via its IP address, like \\xxx.xxx.xxx.xxx\C. Quite often I cannot open the hard drive via \\Name\C, unless I first go to the laptop keyboard and open the hard drive of my work computer from there. What gives? How do I get a transient computer to show up reliably while it's actually connected? I've already looked around and found (and implemented) techniques to lock down the master browser, but that doesn't seem to help with this one computer. No other computers show the same problem, even though they are turned on and off fairly randomly. Steve Hendrix Tag: DNS question Tag: 233491
  - 18
    - 2 workstation names Hi there, For some reason I seem to have 2 workstation names on my W2K Professional. One is in My Computer, Properties, Network Identification or by issuing hostname command, let us call it workstation1 and one comes up when I issue the following command: echo %logonserver% command let us call it workstation2. How can I remove one name? I am also getting error 5719 on it for some reason it is not authenticating with the domain controller but with local machine's second name. Hosts and Lmhosts do not have the 2nd name. In ipconfig I do not have any DNS/Wins servers for some reason, I am on an AD network. Thanks a lot, T Tag: DNS question Tag: 233486
  - 19
    - how to connect 2 LANS i need to connect two LANS. one LAN is our clients(172.16.100.x) and one is ours(192.168.100.x). we have a dedicated link through fibre optic as a transport which links directly to us through the media converter, where it plugs into my layer 2 switch. (not a good design, i know) we (192.168.100.x)need to connect to their oracle database and applications created in oracle as well as use development tools from inside our LAN. what i want to do is to isolate our lan resources where we (192.168.100.x) can access their ((172.16.100.x)LAN, oracle servers and certain clients) but completely restrict their access to our lan. Tag: DNS question Tag: 233484
  - 20
    - earn through sms Hey buddy, I found this great site through which you can send free SMS. Earn from SMS ads / e-mail ads & earn from referring the site to your friends . Plus you get other benefits as well. And its free too. I think you should definitely check it out. Here is the link : http://www.sms2india.co.in/in.php?user=arirajee Your friend, - Ariyanayakasundaram C Tag: DNS question Tag: 233483
  - 21
    - Denying Users Deletion of Files and Folders Hello, I've got a W2K domain and can't seem to configure a particular folder and it's sub folders to deny deletion of files and folders for all users except ones in the Administrator group. I basically want the users to have all access i.e. read, write, modify etc....but just deny them access to delete, if they created the file/folder or not. Anyone have any ideas as to what the easiest way to go about this? Thanks, Steve Tag: DNS question Tag: 233477
  - 22
    - Shut Down and Restart options are missing from the Shut down menu When I click on START | SHUT DOWN. THe Shut Down Windows dialog appears and the only option is to log of username. The workstations are on a server 2003 Network. Yesterday 3 systems had the problem . Today about 10 have the problem. These options are not disabled in any Local / Group Plocies I have searched all over and can't find anything. Anyb help would be appreaciated Thanks David Tag: DNS question Tag: 233473
  - 23
    - W2003? networking where? Trying to find info on networking on W2003 where's the newsgroup? I have to take a Windows 2000 PDC offline and replace it with a Windows 2003 that will be a PDC in it's place. Where can I find info on steps to follow to do that? Thanks for any help, Bob Tag: DNS question Tag: 233472
  - 24
    - Ping both netbios name but give the same IP address In my domain, there's a DC named cndc001 was crashed and then I reinstall this DC and take a name as cndc002 with the same IP address. In the DNS, I deleted all the record of cndc001. but I still can ping to both server name cndc001/cndc002, and both give me the same ip address. I had ipconfig/flushdns both in the server and client, and clean the cache of the dns server. it did not work. thanks for any advice. Bruce Tag: DNS question Tag: 233464
  - 25
    - Slow browsing, but only to one server... We have a 30 client network with two servers on it. We have found that for some time browsing to our one server is very quick, browsing through the other is a bit slower. We're using a VPN now, and the problem has become a lot worse. Not really that it got worse, btu the slowness is increased exponentialy for folks that are VPNing in. If we browse server02, entering \\server02\sharename in the address bar and clicking go or enter it comes up in a matter of 2 or three seconds. If we browse to a folder under that it opens in a few seconds. If we don the same on \\server01\sharename it takes a good 30 seconds. If we brpwse down a folder, it takes another solid 30 seconds. If we see that what w're looking for isn't in that folder and hit the 'UP' button it takes another 30 seconds to go back to the folder we were just in. DNS is running on this system and working fine, I'm really stumped and need some advice on what to play with to look for improvement. Again, all other systems browse to all other systems, though it's hard to tell if the server in question has any problems when browsing out to otehr systems. Where should I start looking here??? Thanks all. Mick Tag: DNS question Tag: 233462

Hi there,
I will be migrating to active directory. We currently use Unix DNS
inside and outside. While I can use windows 2003 DNS in active
directory on the inside to replace present Unix inside name
resolution, can I also forward the external DNS queries from the
inside W2K3 DNS to our outside DNS server to be resolved?
Our outside DNS server also holds our domain.
Thanks a lot

Top

Re: DNS question by Danny

Danny
Wed Oct 24 10:11:41 PDT 2007

Yes.

In this article it shows how to setup forwarders to your ISP, just use your
external DNS server instead.
See:
How to configure DNS for Internet access in Windows Server 2003

http://support.microsoft.com/default.aspx?scid=kb;en-us;323380

hth

DDS

"Tester" <calinguga@netscape.net> wrote in message
news:1193235390.540184.231690@q3g2000prf.googlegroups.com...
> Hi there,
> I will be migrating to active directory. We currently use Unix DNS
> inside and outside. While I can use windows 2003 DNS in active
> directory on the inside to replace present Unix inside name
> resolution, can I also forward the external DNS queries from the
> inside W2K3 DNS to our outside DNS server to be resolved?
> Our outside DNS server also holds our domain.
> Thanks a lot
>

Top