OT:C/C++ Opinion Poll

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - FTP Home Directory Is there a way to have a user that logs into the IIS FTP server on a Windows 2000 Server have a home directory? I dont want them to see or have access to anything in the root of the FTP server. I have created a local user acct and have tried to specify the home folder under the user properties but when they log in it still goes to the root. Is there another way to accomplish this? Thaks in advance. Chad Tag: OT:C/C++ Opinion Poll Tag: 233751
  - 2
    - DHCP Redundancy I have a Windows 2003 network with about 50 client stations. I have two servers running DHCP: server01 has a scope of 192.168.2.10-x.x.x.60 server02 has a scope of 192.168.2.61-x.x.x.115 I do very little on the network as far as adding new stations, installing NICs, etc. My question: Is this a good way to setup DHCP redundancy or am I missing something? Tag: OT:C/C++ Opinion Poll Tag: 233749
  - 3
    - Windows 2000 Server Network Connection drops I'm running a Windows 2000 Server with IIS 5.0 hosting a few websites behind a Cisco Local Director. Occasionally, following what seems to be no specific pattern, the Server will drop off the network entirely, not pingable at all, however, when I view the console, there appears to be nothing wrong with it except for the fact that it has lost it's network connection. However, the NIC still says that it's connected. It doesn't appear to be a hardware issue because this is the second server that I've put in this position and the exact same behavior has occurred. Also, I have been able to clear this at least once by shutting down the switch port it is connected to and then starting it back up again. I can only think that there must be some sort of issue with the amount of traffic and possibly something shutting down the interface, although I just can't believe that is the expected behavior. Has anyone experienced this before or have any ideas on the best ways to possibly debug this? Thanks in advance for any assistance, Lone Tag: OT:C/C++ Opinion Poll Tag: 233748
  - 4
    - work at home Work at Home,business opportunities and home business ideas for Work at Home Moms/Dads,students,job seekers,part time job seekers........http://www.workfrmhome.org/joomla Tag: OT:C/C++ Opinion Poll Tag: 233746
  - 5
    - Packets received goes to zero I've been battling with this for some time now. I have XP and periodically cease to receive network packets. Now I am on wireless, but I'm sure it isn't signal strength, or SNR. When the hang happens, I'm still sending packets, just not receiving them. My best guess is some sort of driver conflict, but I suppose it could be many things. Any clues? Tag: OT:C/C++ Opinion Poll Tag: 233742
  - 6
    - unknown RAS leases in DHCP server sorry for the crosspost in the RAS/routing group, but since i don't have any reply there i'm trying here at the networking group ... ---------------------------------------------------------------------------------------------- hello all, I do not use RRAS in my network, but i have a very strange problem: my dhcp scopes suddenly are full of leases with "unique id" identified as RAS. in fact i can see, all of my dhcp clients have 2 leases, one working active (ping ok)and the one identified as RAS (some seconds older and not in use). it's amazing i even have leases for machines with FIXED ips ! my setup is a win2k sp4 server native domain with 2 domain controllers, one per company site. domain dhcp client computers are winxp pro sp2. i have a 1Gbps cisco switched network with two vlans with 24bits C class subnets. dhcp requests for each subnets are forwarded with ip helper addr. - where does those requests come from ? - why do i have leases for fixed ip machines ? i've tried the "netsh ras ip set addrassign pool" with no success. any help or advice will be very appreciated. thanks in advance for your time. Tag: OT:C/C++ Opinion Poll Tag: 233741
  - 7
    - Error LsaSrv Sir, We have a problem with our mail server running in Windows 2000 Server.When i check the log i found the following error information, Event Type : Error Event Type : LsaSrv Event ID : 5000 What is this error? why it happens ? please give the resolution to solve this problem? I checked with microsoft website and i understand a patch is needed to fix this problem? where do i find the patch?.I already installed service pack 4.Please give me the solution? Thanks and Regards Abdul Rahuman.M Tag: OT:C/C++ Opinion Poll Tag: 233739
  - 8
    - Internet Printing Thanks in advance for your help. Even if you just clue me in on what new group I shoul be posting to. I'm useing DDNS from DynDNS.org to give me access via my Linksys router to my Home computer network. Currently in the router I have requests for Port 80 routed to my host where I have Win2000, Personal IS running and all is well I can bring up web pages I create from the internet. I would like to do something similiar to enable me to print to my home laser printer from the internet when I'm on the road. I would think there is a port for similiar routing requests or ? Can you help me understand what I may do to enable this feature? What kind of security risks am I taking by doing this? Thanks Again John Fors Tag: OT:C/C++ Opinion Poll Tag: 233733
  - 9
    - WinXP user/password prompt takes more than 1 minute to appear (only I've several laptops (IBM ThinkPads) within the same IP network (all connected to one switch). Some laptops are set up with Windows XP SP2 and the others with Windows 2000 SP4. Connecting from a Windows 2000 laptop to another Windows 2000 laptop: Start - Run... - \\win2k1\c$ - Ok -> I get the user/password prompt within a couple of seconds. Connecting from a Windows 2000 laptop to a Windows XP laptop: Start - Run... - \\winxp1\c$ - Ok -> I get the user/password prompt within a couple of seconds. Connecting from a Windows XP laptop to another Windows XP laptop: Start - Run... - \\winxp1\c$ - Ok -> I get the user/password prompt within a couple of seconds. Connecting from a Windows XP laptop to a Windows 2000 laptop: Start - Run... - \\win2k1\c$ - Ok -> I have to wait for more than 1 minute to get the user/password prompt!!! However, if I do it from the Command Prompt with net use z: \\win2k1\c$ /user:testuser testpw it connects within a couple of seconds. Any help and explanations are very appreciated. Regards Stefan Tag: OT:C/C++ Opinion Poll Tag: 233721
  - 10
    - Using Win2000 as a FTP Server I got the general idea as to how to set up Win2000 as a FTP Server from Microsoft. I need to know of any good sites that explains how users can upload files as well as download them, or is this possible?. All the best, SG Tag: OT:C/C++ Opinion Poll Tag: 233705
  - 11
    - Users can't log in to sharted directory Hi, All, Apologies if this is going over old ground, but this server admin stuff is all new to me! My users are having a problem saving to their individual directories on a shared drive on our W2K server. Windows 2000 server used purely as a file server. c:\ has a shared directory for all user files. The shared directory has full use permissions set. Permissions for the users directories is set as user/Administrator/full control No inherited permissions Workstations are XPPro Each has a user account set as 'limited' on the XP Workstations Each has a 'Y' drive which is the shared directory on the server Users can access only their directory, but can't save anything to it Users with admin rights can access their directory but can't save to it Logged in as admin can access and save to any directory Basically, if you're logged in as 'Administrator' you can do whatever you like, which is as it should be, but logged in as any user other than 'Administrator' whatever your level of control won't allow saving to the shared network drive 'Y' It's got to be something simple and I'm probably having a 'senior' moment but right now it's giving me sleepless nights! All and any help gratefully received! Cheers, All Tag: OT:C/C++ Opinion Poll Tag: 233698
  - 12
    - set user's domain Hello everyone, I have a problem when I develop the GINA. I want to get user's setting form the domain, but after call the MicroSoft function NetUserGetInfo the return value USER_INFO_3.usri3_home_dir is null but USER_INFO_3.usri3_home_dir_drive is Z: This is illegal return value. Can you give me a answer about this? Thank you. Tag: OT:C/C++ Opinion Poll Tag: 233693
  - 13
    - roaming profile problem I am having a problem with roaming profiles that I was hoping someone here could give me an answer to. I work at a small charter school with 200 students. We have an older Windows 2000 server and about 40 workstations (all with Windows XP Pro) We want to give each student their own login but we want them all to share a roaming profile. I created a default profile that I want to use. However, when I assign more than one login with the UNC path to that profile I get a security error and then it loads a local profile. I shared the folder and set the security rights to everyone and it still doesn't work. I also tried granting the folder with security rights to match the individual login and that doesn't work. I would greatly appreciate any help. Thank you. Tag: OT:C/C++ Opinion Poll Tag: 233682
  - 14
    - Server with static routes and two NICS I have a Server that is connected by leased lines ( router SDSL) to other two server in brach offices. the first nic have the address 192.168.0.5 gateway 192.168.0.90, ihave 2 static routes pointing to route -p add IPREMOTESERVER1 mask 255.255.255.255 192.168.0.90 and route -p add IPREMOTESERVER2 mask 255.255.255.255 192.168.0.90. The adsl router to acces internet is the 192.168.0.254 So i need this server to use this gateway to connect to internet (so I can connect remotely for support tasks) I install a secoin NIC I configure un this the IP192.168.0.120 and gateway 192.168.0.254 but I cant connect to internet. This is the correct way to do it or I must to change something? THANKS Tag: OT:C/C++ Opinion Poll Tag: 233681
  - 15
    - rdp printer redirection hello, we have a ricoh 2018d printer in our office - this is attached to the network as a stand-alone machine (ie not plugged into the server just into the hub - sorry if my terminology is not quite correct); we have a windows 2003 server running only TS (it is a workgroup computer); our other office has a windows 2000 server... our win2003 server recently had "issues" and the IT people we brought in re-formatted the drive and installed the operating system - setting up TS only. I added the Ricoh to each desktop and our 2003 server as a network printer so the port was like this \\rnp***\aficio2018d we started having problems right away so I re-installed the printer as a local printer with an IP port (is this the same thing as a dot4 port??) so in our office we can print with no problems from our desktops to the printer; we also rdp into the 2003 server (without printer redirection as I installed the printer on the 2003 server as well) and we can print with no problems. When we rdp into our other office (with printer redirection on the client side and it is allowed at the the 2000 server side as well) the printer is not redirected - BUT only for some of our desktops. I figured from what little i undersatnd that it may be because of the port being an IP address - but why would some desktops still work? I ensured that the 2000 server has the same driver that we are using. Anyway, I just tried setting up the printer as a network printer again on my desktop (ie with the \\rnp---\aficio port) and it is redirected !!- I don't want to have two printers set-up on each desktop if I don't have to and I especially don't want the \\rnp printer to start causing problems again - any suggestions or direction will be greatly appreciated! Trevor Tag: OT:C/C++ Opinion Poll Tag: 233678
  - 16
    - How do I stop outgoing NETBIOS Traffic? I have a win2k domain controller running WINS, DNS. The domain only has a few machines as it is a development environment. A few days ago I noticed I had some problems getting any machine to establish any sort of outside connection (HTTP, FTP)...even directly to the linksys router. After investigatin further I noticed the domain controller was broadcasting a tremendous amount of data. If I disconnected the domain controller from the router I got outside connectivity back. I installed a packet sniffer a saw nearly 4 of these per second: netbios-ssn Source: 192.168.1.100 Destination: xxx.xxx.xxx.49 netbios-ssn Source: 192.168.1.100 Destination: xxx.xxx.xxx.50 netbios-ssn Source: 192.168.1.100 Destination: xxx.xxx.xxx.51 netbios-ssn Source: 192.168.1.100 Destination: xxx.xxx.xxx.52 ... The destination is continual and sequential. when I view via netstat -a: TCP MyMachineName:1944 0.0.216.100:netbios-ssn SYN_SENT TCP MyMachineName:1945 0.0.216.101:netbios-ssn SYN_SENT TCP MyMachineName:1946 0.0.216.102:netbios-ssn SYN_SENT TCP MyMachineName:1947 0.0.216.103:netbios-ssn SYN_SENT ... These requests start at 0.0.0.0 and continiue forever. The packets are hitting machines in Seattle, Minnesota, LA, etc...nothing to do with my internal domain. After doing some Googling I found that many reccomended disabling netbios over TCP which I did but still encountered the same activity. What is this? Is this virus activity or normal behaivior...if it's normal behavior I want to disable it because I can't even get to my own router with out disconnecting the "packet pushing" domain controller let alone other resources. Thanks in advance for any suggestions! Tag: OT:C/C++ Opinion Poll Tag: 233677
  - 17
    - How do I stop outgoing NETBIOS Traffic? I have a win2k domain controller running WINS, DNS. The domain only has a few machines as it is a development environment. A few days ago I noticed I had some problems getting any machine to establish any sort of outside connection (HTTP, FTP)...even directly to the linksys router. After investigatin further I noticed the domain controller was broadcasting a tremendous amount of data. If I disconnected the domain controller from the router I got outside connectivity back. I installed a packet sniffer a saw nearly 4 of these per second: netbios-ssn Source: 192.168.1.100 Destination: xxx.xxx.xxx.49 netbios-ssn Source: 192.168.1.100 Destination: xxx.xxx.xxx.50 netbios-ssn Source: 192.168.1.100 Destination: xxx.xxx.xxx.51 netbios-ssn Source: 192.168.1.100 Destination: xxx.xxx.xxx.52 ... The destination is continual and sequential. when I view via netstat -a: TCP MyMachineName:1944 0.0.216.100:netbios-ssn SYN_SENT TCP MyMachineName:1945 0.0.216.101:netbios-ssn SYN_SENT TCP MyMachineName:1946 0.0.216.102:netbios-ssn SYN_SENT TCP MyMachineName:1947 0.0.216.103:netbios-ssn SYN_SENT ... The packets are hitting machines in Seattle, Minnesota, LA, etc...nothing to do with my internal domain. After doing some Googling I found that many reccomended disabling netbios over TCP which I did but still encountered the same activity. What is this? Is this virus activity or normal behaivior...if it's normal behavior I want to disable it because I can't even get to my own router with out disconnecting the "packet pushing" domain controller let alone other resources. Thanks in advance for any suggestions! Tag: OT:C/C++ Opinion Poll Tag: 233676
  - 18
    - Best Print Server Hello all, I've been having problems where the print spooler service keeps crashing. I figured that I would put the printers on a dedicated print server device such as the one by D-Link. Unfortunately, it hasn't gone smoothly. I can't seem to make the thing "see" the second printer. Does anyone recommend a print server device that I might try? Tag: OT:C/C++ Opinion Poll Tag: 233674
  - 19
    - 500 Networking Interview questions for routers , firewall , VPN and lot 500 Networking Interview questions for routers , firewall , VPN and lot Download full Networking Interview questions Ebook http://geocities.com/questpondnet/ Networking Basics Can you define protocol? Can you explain the concept of OSI layer? Can you explain the different layers in OSI model? Can you explain Application layer in OSI model? Can you explain Presentation layer in OSI model? Is it compulsory that compression, encryption and translation functions will be used during communication? Can you explain Session layer in OSI model? What's the concept of Simplex, Half Duplex and Full Duplex dialogs? What are the different types of dialogs in Session layer? Can you explain Transport layer in OSI model? Can you explain the concept of Congestion? Can you explain Network Layer? Can you explain Data link Layer? Can you explain the Physical layer? Can you explain what an IP address is? How to convert Decimal to Binary? How many IP addresses can come in IPV4? Can you explain the concept of Unicast IP address? Can you explain the concept of IP multicasting or multicast IP address? How many different types of subnet classful networks are present? What are the IP address ranges for public and private IP address? Why do we need class and how many different types of class exists? How are the IP addresses distributed between different classes? Can you explain what is classful IP addressing? Can you explain the concept of subnetting? What are the advantages of using subneting? If the host has the subnet ID why do we need a subnet mask? How is network address calculated from the subnet? What is the advantage of using classless addressing over classful addressing scheme? Can you explain the concept of CIDR? Twist :- Can you explain superneting ? Can you explain concept of custom subneting? What is the implication of increasing and decreasing subnet Bits? Why do we need to subtract two from number of hosts? Can you explain the concept of VLSM? Can you explain IP protocol? Routers Can you explain the concept of DPU, Segments, Datagram, Frame and packet? What is IP datagram fragmentation and MTU? Can you explain in detail with example how data fragmentation works? Larger the IP datagram less the overhead, is it true or false? What is the minimum size of MTU bytes? Can you explain how optimal MTU size is calculated? How does the IP message finally reassemble? Can you explain the concept of Repeaters, Hubs, Bridges, Switches and Routers? On what layers do router , switched , bridges and hubs operate ? Can you explain the concept of Layer 3 switches? what are CSU, DSU and TSU? what are the basic components of the router? Can you explain the WAN and LAN Interface in Routers? What are DB-15, DB-60 and RJ-45 in CISCO routers? Can you explain the concept of TTL? What is the concept of ICMP packets? Which operating system does CISCO have? Can you explain the concept of NAT? How is NAT implemented? Can you explain how actually NAT works? why does collision occur in HUBS and repeaters? Can you explain the concept of Collision domain? What is the concept of routing tables? what is the use of route print? Can you explain how in detail how routing table looks like? How can you see route tables on the router? Can you explain the concept of static and dynamic routing? When to use Static routes and dynamic routes? How do you configure static routes on a router? Can you explain static default routes? What is the advantage of using Static default routes? Why do workstations have route tables? What is the concept of gateway of last resort? Can you explain the concept of routing protocol? What activities does routing protocol perform? What metrics are used by routing protocols to determine the best path? Can you explain what is interior and exterior routing protocols? Can you explain the concept of intradomain and interdomain routing protocols? Can you explain the concept of internetwork and intranetwork routing protocols? Which method does routing protocol use to determine shortest path? What is distance vector routing protocol? How do router share information in Distance Vector routing? What is the main issue with routing by rumor? Can you explain the count-to-infinity problem in distance vector? How is metric or the cost calculated for Distance Vector routing protocol? What is the main issue with hop count metric issue? Can you explain how Link-State routing protocols work? Can you explain the concept of broad cast and multi-cast? Can you tell which protocols lie in Distance vector and which in Link- State? What's the difference between distance vector and link-state protocol? Can you explain difference between Single path and Multipath? Can you explain route summarization? How are the series of IP combined in to one route path in route summarization? Can you explain RIP protocol? How is route table populated by RIP protocol? Can you explain convergence in networks? Can you explain RIP timers in detail? Can you explain routing loop issue in RIP protocol? How do we avoid routing loop issue in RIP? In RIP why do we have HOP count of 15? How do we disable auto-summarization in RIP? Can you explain IGRP? How does IGRP work? How many timers does IGRP have? How does IGRP calculate metric? Can multiple instance of IGRP run on one physical router? How is load balancing done in IGRP? What's the command to configure IGRP? Can you explain EIGRP? What does neighbor terminology mean in EIGRP? What are different types of packets in EIGRP? How does EIGRP protocol update route information to its neighbors? What is the concept of successor in EIGRP? What is DUAL in EIGRP? Can you explain reported distance (RD), feasibility distance (FD) and Feasibility condition (FC)? Can you explain the concept of successor and feasible successor? Can you explain passive and active route states? What is SIA or stuck in active? How do packets and timers in EIGRP work? What are the different tables used in EIGRP? Can you explain EIGRP metrics? Can you explain how EIGRP finds its successor and feasible successor? Can you explain Active and Passive route? Can you explain OSPF? How does OSPF populate route table? What are the different tables in OSPF? Can you explain different areas in OSPF? Can you explain different router types in OSPF? Can you explain Designated Router and Backup designated router? Can you explain different router states in OSPF? Can you explain different OSPF packet types? What are the different types of OSPF timers? How SPF algorithm does the route determination? Can you explain autonomous system? What are different types of dynamic protocols? Can you explain autonomous numbers in EGP? What is BGP? What is the concept of BGP speakers and Peers? What is EBGP and IBGP? What is RIB? Can you explain the concept of BGP confederations? What are BGP path attributes? What is the concept of NLRI? How are routing neighbors discovered in BGP? Can you explain how BGP does the decision process? What is the concept of redistribution? Can you explain the concept of one way redistribution and mutual distribution? How does metric translation takes place in redistributing routes? Firewall Can you define what a FIREWALL is? What are the different types of firewalls? Can you explain packet filtering firewall? Can you explain circuit level gateway? Can you explain stateful inspection? What is Application Gateway? Is NAT a firewall? Are personal firewall actually firewalls? Can you explain the concept of demilitarized zone? What is the meaning of bastion host? What are the different types of firewall architectures? Can you explain dual home architecture? Can you explain screened host architecture? Can you explain screened subnet architecture? What is the use of perimeter area? What is IP spoofing and how can it be prevented? VPN Can you explain the difference between trusted and untrusted networks? Can you define in short what VPN is? What are the different types of VPN? What requirements should a VPN fulfill? How many ways are there to implement VPN architecture? What are the different ways authentication mechanism in VPN? Can you explain the basic of encryption in VPN? what's the difference between Symmetric and Asymmetric cryptosystem? what are the different symmetric algorithms? What are the disadvantages of symmetric algorithms? what are the different asymmetric algorithms? Can you explain different components in PKI? What is a digital certificate? Can you explain tunneling? what is the concept of HA and FA in VPN tunneling? Can you explain VPN tunneled packet in detail? Can you explain voluntary and compulsory tunnels? Can you explain static and dynamic tunnels? Can you explain encapsulating, carrier and passenger protocol? On which layer does L2F, PPTP and L2TP operate? Can you explain PPP protocol? Can you explain PPP link process step by step? Can you explain PPP packet format? How does PPP use LCP for link control? Can you explain PPTP (Point-to-Point Tunneling Protocol)? What is GRE in PPTP? How does PPTP encapsulate data? Can you explain CHAP? Can you explain PAP? what does PPTP use for encryption and authentication? What is a L2F protocol? Can you explain the broader steps of how L2F establishes the tunnel? Can you explain how L2F data tunneling process works? How do we do encryption and authentication in L2F? Can you explain L2TP? Can you define LAC and LNS? How does L2TP process? How do we do encryption and authentication in L2TP? Can you explain what IPSec is? Can you give an overview of various components in IPSec? In IPSec what is SAD, SPD and SA's? Can you explain in a generic manner the packet of IPSec? Can you describe the Authentication Header (AH) Protocol? what is ESP (Encapsulating Security Payload)? What is Transport and Tunnel mode? Can you explain IKE (Internet Key Exchange)? Can you explain IKE phases? Can you explain IKE modes? Can you explain transport and tunnel mode in detail with datagram packets? Protocols and other questions What is NetBIOS protocol? Can you explain what the use of IGMP Protocol is? What are the different types of host in multicasting? Can you explain Ping and Tracert? How do you continuously ping an IP Address? How does Tracert actually work? what is the use of RTP and RTCP Protocol? Can you explain RTP in Detail? Can you explain RTP multiplexing in detail? Can you explain format of RTP and RTCP packets? Can you explain RSVP? Can you explain in detail how RSVP actually works? Can you explain RPC (Remote Procedure Calls)? Can you explain the RPC and Client server Architecture? Can you explain TCP IP Protocol? Can you explain the architecture of TCP IP Protocol? Can you explain TCP header in detail? Can you explain IP protocol? Can you explain the concept of CDMA? Can you explain the concept of DHCP? How does DHCP work? How can we configure DHCP? What is DNS? How do we control USB through a network? What is the difference between Windows 2000 and Windows 2003? What is a difference between a domain and workgroup? Tag: OT:C/C++ Opinion Poll Tag: 233673
  - 20
    - Local Area Network (LAN) Local Area Network (LAN) Both an EtherNet (wire) network and a wireless network are referred to as a Local Area Network (LAN). A wireless network does not require hubs, switchers, or routers to include additional users on the network. Additional wireless users are supported just by being in the immediate physical span of the network. http://www.askstar.com.cn/health/Installing-Wireless-Technologies.htm Tag: OT:C/C++ Opinion Poll Tag: 233672
  - 21
    - First hop timeout problem Just upgraded from W2k to XP SP2 IE7 I was troubleshooting a problem with with the Windows time service not syncing with any public internet time server. Whenever I would try to update the time I would get a message telling me an error had occurred. I tried to determine if the server was active by pinging it and it responded OK indicating the the problem probably wasn't a dead server. However, further checking with Tracert indicated the the first hop timed out but all the other hops worked as expected. Turns out this happens on any tracert, not just the time servers. I'm far from being a network expert but this tells me that the reason the time update isn'tworking is because Windows Time isn't able to make connection because of the timeout problem. So, my real problem appears to be this timeout of the first hop...can anyone think of a reason this is happening. I am not experiencing any problems with browsing the internet, sending/receiving mail, or any other issues that I am aware of. Am I totally out in left field? I would be most appreciateve for any help getting this problem resolved. Tag: OT:C/C++ Opinion Poll Tag: 233666
  - 22
    - Accessing win2k Remotely Is it possible to access a windows 2000 Professional computer remotely through Remote Desktop like Win Xp Prof? Thanks! Tag: OT:C/C++ Opinion Poll Tag: 233664
  - 23
    - sharing files with windows 98se PC I have AT&T DSL and a router connecting both PC's (windows 2000 sp2 and windows 98se) and both have good access to the internet at the same time. So far, so good. I want to share files on both PC's with each other, and I am lost trying to figure out how to do that. I viewed the following microsoft webpage: http://support.microsoft.com/kb/g258717/ but it is ahead of me - I don't have any way of seeing my windows 98se PC on my windows 2000 PC (or vice-verse). When I go to "network and dial-up connectons", under the TOOLS tab, I select "map network drive", but, under "entire network, and also "computers near me", I only see my own windows 2000 PC - my windows 98se PC does not appear. How do I tell windows 2000 that there is another PC (connected via the router), and that it has the same workgroup name ("HOME") as my windwos 2000 PC has and that it uses the same protocols. I don't see any button for "detect a locally connected PC" or something logical like that - how do you let win2k know about it so I can select which drive to map? THanks, littleberry Tag: OT:C/C++ Opinion Poll Tag: 233662
  - 24
    - File Sharing Mystery I just did a clean reinstall of Windows 2000, and now, I cannot access shares on another Win2K system. Every time I try, I get the username/password box and each time the username and/or password is not recognized. This happens when using the default share (C$) or an explicit share name assigned to a folder on the other Win2K system. Sharing back to the reinstalled version of Windows from the other machine still works just fine. Usernames and passwords on both systems are identical, and they are both set up on the same WORKGROUP. I have run out of ideas as to what might be wrong -- any ideas? TIA -- Jay (remove dashes for legal email address) Tag: OT:C/C++ Opinion Poll Tag: 233659
  - 25
    - printers This is probably a simple question, but.... Oftentimes when I setup a new PC they may have printers they want that user to have. But the user has no signed in yet. Is there a way to create it so that when the user logs in, whenever they do, they will get those printers? I only know of doing this with a logon script. Is there any other way? Tag: OT:C/C++ Opinion Poll Tag: 233654
- Next
  - 1
    - favorites I have one link that I want to add to everyone's favorites domain wide. How could I do this? Tag: OT:C/C++ Opinion Poll Tag: 233653
  - 2
    - Moving the role of File/Print Server to New Win2k3 Box !!!!!! Hi! Can anybody give step-by-step on how to move the role of a Print/File Server from one Windows Server 2003 box to another ? I basically have 3 Server in our office 1) DCSRV01 - Win2k3 Domain Controller 2) EXSRV01 - Exchange - 2003 ( Additional DC) 3) FPSRV01 - Win2k3 - File and Print Server I will be setting up a new Storage Server and wish to transfer the role of FPSRV01 to the new Storage Server with less or no changes being done on the Client computers. Pl suggest Thank you Harry Tag: OT:C/C++ Opinion Poll Tag: 233649
  - 3
    - Naming a Win PC workgroup on a LAN Hello, What is the correct way to name a Win PC workgroup on a LAN? Seems any non-spaced word is acceptable. Now, the network setup wizard provides options for a domain name "name.dns" (Business connection), if not chosen the only Net ID would be the workgroup name, presumably ok for peer to peer interactions in a home LAN. Now if the system is to be networked with UNIX machines, FreeBSD and others how should this be best handled? I have a system so set up, using just the workgroup name and using the same name on the UNIX machines, no DNS extensions. However, the system seems to have some instabilities, sometimes it works fine and other times it doesn't => with responses of "Mixedgroup is not accessible. The network name cannot be found." in a Windows Explorer Dialog Box. -- Adam -- Tag: OT:C/C++ Opinion Poll Tag: 233647
  - 4
    - RDP I need to RDP to a windows 2000 pro workstation. How do I set that up on this pc? Is there an Article that I may follow? Tag: OT:C/C++ Opinion Poll Tag: 233644
  - 5
    - Weekly Hottest Computer Free tips (30-10-07) Weekly Hottest Computer tips Hello Dear, Computer Free Tips will give you practical advice, great tips, and few tricks every weekday. This newsletter is sent out every Tuesday and is designed for those who love to learn Computer in detail. These are the Hottest Computer Tips of the last week. 1- How to protect your computer with advanced backup and recovery? A backup is a duplicate copy of a file, program or disk that can be used if the original copy is lost, damaged, or destroyed. Thus, if you regularly take backups of your sensitive data or programs and update them as and when needed, system failures can be covered easily through these backups. http://www.computerfreetips.com/oct_computer_tips/27_ghost_backup.html 2- How is virus activated on your computers? There are different methods through viruses may be transferred from one computer to another. Now- a-days, most of the viruses spread due to receiving unknown e-mail messages that contains viruses. When a user opens such an infected message, the virus is also loaded into the computer memory. http://www.computerfreetips.com/oct_computer_tips/25_virus_activated.html 3- How to detect viruses in a computer using multiple antivirus engines? Virus detection and its removal are made through an antivirus program which finds out viruses in a computer and then possibly removes or repairs the virus problem. But today an interesting tip, how to scan your system without any installed antivirus program. http://www.computerfreetips.com/oct_computer_tips/23_detect_viruses.html 4- How to Enable Boot Logging to troubleshoot windows startup problem? You can troubleshoot many of computer startup problems using windows boot logging. When you start you computer with enable boot logging feature, a log file will be created to identify the drivers and services that is creating the problem during startup. http://www.computerfreetips.com/oct_computer_tips/21_boot_logging.html Thanks ComputerFreeTips.com Team Tag: OT:C/C++ Opinion Poll Tag: 233641
  - 6
    - Internet Connection Wizard At step 3 of 3 in the Microsoft Internet Connection Wizard where the prompt is to give a name to , in this case, a new dial-up connection the system will not accept any name that is given to it no matter what I seem to enter. This makes no difference to anything and is preventing me from getting back online when my cable is down and I have to use dial-up. Please send a fix to tubking@gmail.com. Thanks, Jeff Tag: OT:C/C++ Opinion Poll Tag: 233640
  - 7
    - anti-virus suggestions We got Symantec Endpoint which is a very impressive program. The problem is that it's so high end that our systems are slowing to a crawl. We have 5 year old systems in a network that run Windows 2000/2003 servers with 60 clients. Is there any anti-virus with centralized management that won't slow older hardware down? Tag: OT:C/C++ Opinion Poll Tag: 233637
  - 8
    - Network Issues keep on going Semaphore Timeout ? Recent issues with a laptop are still ongoing. The laptop can see and has access to each of the other computers as it should. The other computers can see the laptop, but, can not access the directories properly. The last error I got was that the "network path was not found". I recently had to delete the TCP/IP protocol and reinstall it. after doing this everything was up. Sorry for the long preamble - How do we set the variables / parameters for the networking? Even a hint would be good. Thanks JMAC out Tag: OT:C/C++ Opinion Poll Tag: 233636
  - 9
    - 3 sec deadtime by opening windows shares Hi, we have a mixed network (Windows 2000 AD/ Netware eDirectory) When try to access a Netware share - the content is listet prompt. When try to access a Windows share - the content is listet after a pause. The same occurs, when open a link with unc-path, or when we klick on a mapped drive. The second time the link/share opens immediatly. I suppose this is a problem of the master browser settings. Whe have a Wins-Server and the clients are configured to use the Wins-Server. (The Wins-Server settings are deployed by DHCP options) Thank you Lothar Tag: OT:C/C++ Opinion Poll Tag: 233635
  - 10
    - logon window disappeared I am using a win 2k pro desktop as the server and internet connection sharing computer for a home network. Clients are both running win xp home. Using a Linksey router/access point ethernet connection to the desktop. Both other computers, a Gateway laptop, and a Dell desktop are wireless.(live in very rural area, nothing but dialup available.) My question involves security. When I first set this up you had to logon to the server computer to access files or printers. All of a sudden this disappeared and now it is open access.Any help would be greatly appreciated. Thxs. Tag: OT:C/C++ Opinion Poll Tag: 233631
  - 11
    - active directory usage on client PC Hi there, We will migrate to active directory shortly. Does this incur a big load on the client PC? For ex. a W2K Pro Pentium machine with 128 MB of memory will see any additional load? Do I need to upgrade memory, CPU? Thanks a lot, T Tag: OT:C/C++ Opinion Poll Tag: 233629
  - 12
    - Access Denied Hi, We have 3 Win2000 Server SP4 on the network. 2 Members and 1 DC. I sometime have to fix my collegue computers and want to use resources on the network like shares folders and Internet access. Because the employes PC don't need to be part of the Domain, I connect to servers by typing the server name in the run box like \\servername. Then a logon windows shows up and requires a domain user name. I type in a username and can see and access all available shares on the server. This works fine on member servers but doesn't on the DC? I got the following : \\servername is not accessible....Rights...Please contact.... and then Access Denied. How can I make this work on the DC since I have to access share files? I don't understand why by provinding a username and a password, I manage to connect to member servers but this one won't even let me go further in the connecting process. This DC replaced a another one a while ago and on the olf one, I could access it that way! I took a look at DC and Domain Security policy and can't figured out if there is anything wrong. How can I fix this please? Thanks in advance. Steve Tag: OT:C/C++ Opinion Poll Tag: 233626
  - 13
    - VPN Hey gurus, I have one main office(20 users) and two remote offices(5 users, 10 users). The main office has Small Business Server. All clients are windows XP. Each office has static IP ADSL. Can I do this: each remote office connects via VPN to main office and becomes part of same domain as at main office (eg connect to Exchange, dhcp, browse shares etc) but when remote office users browse web, their web traffic stays off the VPN. Always grateful for advice. All offices have nice ADSL routers but more hardware can be had if needed. Thanks, John Tag: OT:C/C++ Opinion Poll Tag: 233625
  - 14
    - DNS question Hi there, I will be migrating to active directory. We currently use Unix DNS inside and outside. While I can use windows 2003 DNS in active directory on the inside to replace present Unix inside name resolution, can I also forward the external DNS queries from the inside W2K3 DNS to our outside DNS server to be resolved? Our outside DNS server also holds our domain. Thanks a lot Tag: OT:C/C++ Opinion Poll Tag: 233622
  - 15
    - windows 2k login prompt or how I screwed up. I mistakenly posted this in the microsoft.=ADpublic.=ADwin2000.=ADgeneral before I found this group, sorry about that. Hi, We only run workgroups on our network, we do not have a domain. The other day the boss asked me to change the network settings so that all computers would be on the same workgroup. At the end of the day I had one more computer to go, I was in a rush and accidently set it to a domain. Now when the computer boots up, the administrator login requires a password and a domain to connect to. I want to get this computer network settings back to using workgroups. How do I do this? I have tried safe boot but no luck. Your help is greatly appreciated. thanks Bradley Tag: OT:C/C++ Opinion Poll Tag: 233621
  - 16
    - Proxy server I have a windows 2000 web server which works fine for the last 5 years. This server gives access to the internet for 10 windows xp workstations through a proxy server. The problem is that some applications do not work because they need direct access to the internet. I have tried several times to setup the NAT service but the result was awful and I had to setup the server from the beginning. Can someone help me to solve this problem? Tag: OT:C/C++ Opinion Poll Tag: 233619
  - 17
    - Brower error in Event Viewer! Hi! I have 3 Windows 2003 Severs: 1) Domain Controller 2) Exchange Server 3) File Server I get this event logged in the System category of Event Viewer for around 10 times a day on the exchange Server and the file server. Iam still hunting for an answer. Has anybody come across this error- if so pl pass me the solution. Iam looking to have an error free event viewer and Iam pretty much close to it. :) Event Type: Error Event Source: BROWSER Event Category: None Event ID: 8032 Date: 10/22/2007 Time: 3:05:15 PM User: N/A Computer: SGP002 Description: The browser service has failed to retrieve the backup list too many times on transport \Device\NetBT_Tcpip_{603B36A7-1DB4-466F-8FF9-83A24BD2204E}. The backup browser is stopping. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 7a 00 00 00 z... Thanks in advance Regards Harry Tag: OT:C/C++ Opinion Poll Tag: 233616
  - 18
    - My file sharing in My LAN is very occasional Hi, I have a Wireless LAN with three computers all running Windows XP Pro SP II. All comuters have full firewall, Windows Firewall is on with excceptions allowing access to shared files within my local network. The computers keeps getting and loosing the access to shared files all the time. E.g. when I want to copy a group of files from a computer to another, the copying is interrupted saying that the access to the other PC is gone ... Can nay one explain this behaviour and tell me how to get rid of it? Ragards, M Shafaat Tag: OT:C/C++ Opinion Poll Tag: 233612
  - 19
    - Windows 2000 port filtering Hi Guys, We have a Windows 2000 IIS box that used to be hosted offsite but is now on our office connection. We have tried to enable RDP through its LAN interface (which was disabled, but we have now turned on) however it does not work. The LAN interface allows the IIS box to ping all our local machines by IP address, but telnet and all other types of RDP/Remote Control apps do not work. The IP filters and IPSEC stuff is all empty (not enabled) under the properties of TCP/IP for the network card, so I am wondering if this is possibly enabled through the registry. Also, there does not appear to be any software based firewalls and what not on the server so it will be nothing to do with 3rd party software. Thanks in advance. Tag: OT:C/C++ Opinion Poll Tag: 233611
  - 20
    - Windows 2000 port filtering/blocking Hi, We have a web server that was previously hosted offsite, but is now on our office connection behind a seperate firewall. It has two nics, one of the WAN and one for the LAN, but the LAN nic was not connected to anything for security reasons. We now have connected the LAN nic temporarily to allow RDP access to the web server from our LAN, but this is not working. We can ping the LAN address of the web server, and the web server can ping our LAN, but for whatever reason, RDP wont work. We have removed and re-installed it, but no difference. I have also tried thrid party utilities for remote control of the system but these wont work either. It seems the web server only allows ping traffic to pass over the lan interface to our network (not even telnet works). The IP filtering and IPSEC settings for both network cards are empty, so I am wondering if there are any registry keys or similar that could be blocking this traffic? Thanks in advance for your help. Tag: OT:C/C++ Opinion Poll Tag: 233610
  - 21
    - adding local printer Hi, I want add a printer as a local printer in computer with out any driver CD (The windows XP also doesn't have the driver). But, the same printer is already added as a local printer in one of the computer in the network. i.e If computer1 has a local printer in the network, I want to add the same printer type in computer2 in the same network as local printer (not as a network printer) and the driver should be taken from the computer1. Please give me the suggestion. Thanks, Prabu. Tag: OT:C/C++ Opinion Poll Tag: 233603
  - 22
    - HP Desktop for sale! Hi, I have an unused HP Pavilion with the fallowing specs: # Processor: AMD Athlon 64 X2 4000+ (2.1GHz, 2000MT/s System Bus) # Memory: 2048MB PC2-5300 DDR2 SDRAM memory (2x1GB) (expandable to 8 GB (4 x 2 GB) (64-bit OS)/ 4 GB (4 x 1 GB) (32-bit OS)) # Hard Drive:320GB 7200RPM SATA 3G (3.0 Gb/sec) hard drive # Optical Drive: 16X DVD(+/-)R/RW 12X RAM (+/-)R DL LightScribe SATA drive # Expandable Drive Bay: HP Pocket Media Drive bay # Video Graphics: Integrated graphics # Network Interface: Integrated 10/100BaseT network interface # Sound: High Definition 8-channel audio # Fax/Modem: 56K bps data/fax modem # Operating System: Genuine Windows Vista® Home Premium This is "used" but basically brand new (it has literally been on for no more than 6 total hours..) is only 1 month old.. PRICE: $425 OBO Email- pbdude911@yahoo.com Tag: OT:C/C++ Opinion Poll Tag: 233601
  - 23
    - Watch NFL Games Online Watch NFL Games Online! For every one who wants to watch the games online because they dont live in the teams town or are at work i found a site that has basically every game covered. Its perfect if you have afford a monthly $70 direct tv nfl access subscription. they got a bunch of channels The sites http://nflonline.wizhoo.com Tag: OT:C/C++ Opinion Poll Tag: 233600
  - 24
    - Fatloss computer program I have been using this computer program for a couple weeks now and i am very pleased with the results so far. its a software fatloss program, if your looking for a diet/weightloss plan i reccomend you check this place out first: http://fatloss9.50webs.com Tag: OT:C/C++ Opinion Poll Tag: 233599
  - 25
    - error ID 1000 Windows cannot obtain the domain controller name for your computer network. Return value (59). this is a dual homed domain controler. It has exchange and is the internet router for this company. They have 8 domain controlers that are site to site vpn's I have checked the binding order on all conrtolers,. I have gone over and over the dns servers on each. I forced Kerberos to use TCP instead of UDP on this controler. Does anyone have any sugustions. Nothing seem to stop this error. Replacation is working fine and the error doesn't seem to cause any problems except mess up the evert log. Tag: OT:C/C++ Opinion Poll Tag: 233594

Hi,

Mainly for the brazilians and occasionally others portuguese
speakers that are C/C++ developers here:

Please, would be important if you were answered the opinion poll
about C/C++ in page http://www.cbrasil.org/wiki/index.php?title=Enquetes,
mainly to first question.

Is there many interestant questions and this page are in [PT-BR]

++thx;

Ed

Top