internet explorer 7 will not connect to the internet

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Lost internet connection after home network setup Hi, Since I have set up a home network to swap files between my laptop and desk top wirelessly I have found that my laptop only has internet access when the desktop is booted up whereas before it used to work wirelessly through the modem/router regardless of the state of the desktop. My laptop has Vista and the desktop has XP. Could you through some light on what I have done and how to sort it out? Thanks Charlie Tag: internet explorer 7 will not connect to the internet Tag: 289032
  - 2
    - Network not seeing all drives Windows XP Professional I cannot connect to computer "Dads" from computer "Tab". I cannot connect to "Ralph" from "Dads". There are other computers also having trouble connecting. When I click on Microsoft Windows Network on "Tab" it lists out all of the computers that really do exist in the Workgroup ISMGroup. those are Antec Dads Databox Laptop Ralph Screamer Tab When I click on Dads under Microsoft Windows Network while on Tab computer I get error message. "Dads is not accessible. You might not have permission to use this network resource. Contact the administrator to find out if you have access permissions. The network path was not found" While on Dads computer under same location, the workgroug ISMGroup only lists out Dads C drive and shared folders etc. Other problems while on Dads is that only 4 of the 6 already setup mapped network drives exist, and of those 4 I can only see Tab and Databox, and cannot see Ralph or Laptop when I click on each under the mapped network drive section. We cannot recall changing any settings. I am trying to use "browstat status" to debug. Tag: internet explorer 7 will not connect to the internet Tag: 289020
  - 3
    - All XP home LAN - file-sharing stubborn bewteen just 2 systems I'm in the UK and have a Main computer (XP) that connects by ethernet to the BT Home Hub H (version 6.2.6.E) and a wireless LAN consisting of 3 other desktops and a laptop, all XP. I've had no big problems over the months I've set up file- and printer-sharing other than the typical Zone Alarm matters of ensuring the IP range is covered. I've suddenly lost file-sharing ("not accessible... might not have permission... network path not found") between the laptop and the Main desktop. Neither wishes to share with the other, although they see each other, and ping each other ok, as do all the others. All the others are ok and can file-share as normal amongst themselves and the Main one. The laptop shares OK with the others. It's just the laptop and Main that are having a spat. I've tried in vain setting up a whole new network name. I've tried in vain opening a new folder in each to share in the hope it might trigger some action. And I tried in vain deactivating Zone Alarm on both at the same time. I feel sure it's an XP file-sharing issue, but can think of nothing else to try. File-sharing is not something I do on a regular basis between the laptop and the Main system, but I suspect that this may be a post SP3 symptom - SP3 is on all systems now. I've enabled the Guest account on both systems. Any ideas please? Miles Tag: internet explorer 7 will not connect to the internet Tag: 289017
  - 4
    - Long delay in copying small files on shared drive Client PC: WinXP SP3 Server: Windows 2003 Server Enterprise Ed. SP2 Problem: Often, but not always, when using Windows Explorer to copy a small group (about 3) of small (under 1K) text files from one folder to another on the same mapped drive, it will take about 30 seconds to a minute before the overwrite confirm dialog box appears. After confirming the copy, the file progress bar appears for another period much longer than should be necessary to copy files of this size. When copying the same files using the Copy command, there is no noticeable delay. The following packet trace shows a three instances of a long delay. Each seems to involve a TCP request that looks like: TCP wfremotertm > microsoft-ds [ACK] Seq=7911 Ack=10372 Win=65089 [TCP CHECKSUM INCORRECT] Len=0 There are no retransmissions, so I think the incorrect checksum is due to hardware offload, correct? The delays occur around packets 115, 264, 310, 362, & 434 Can anyone tell me what's causing this? No. Time Source Destination Protocol Info 1 0.000000 172.16.6.51 172.16.5.32 SMB Trans2 Request, QUERY_PATH_INFO, Query File Basic Info, Path: \krm\10\reg\00341914 2 0.000549 172.16.5.32 172.16.6.51 SMB Trans2 Response, QUERY_PATH_INFO 3 0.000688 172.16.6.51 172.16.5.32 SMB Trans2 Request, FIND_FIRST2, Pattern: \krm\10\reg\00341914\default.css 4 0.001348 172.16.5.32 172.16.6.51 SMB Trans2 Response, FIND_FIRST2, Files: default.css 5 0.001589 172.16.6.51 172.16.5.32 SMB NT Create AndX Request, FID: 0xc02c, Path: \krm\10\reg\00341914\default.css 6 0.002146 172.16.5.32 172.16.6.51 SMB NT Create AndX Response, FID: 0xc02c 7 0.002206 172.16.6.51 172.16.5.32 SMB Trans2 Request, QUERY_FILE_INFO, FID: 0xc02c, Query File Internal Info 8 0.002546 172.16.5.32 172.16.6.51 SMB Trans2 Response, FID: 0xc02c, QUERY_FILE_INFO 9 0.002730 172.16.6.51 172.16.5.32 SMB Read AndX Request, FID: 0xc02c, 1180 bytes at offset 0 10 0.003347 172.16.5.32 172.16.6.51 SMB Read AndX Response, FID: 0xc02c, 1180 bytes ... ... 100 0.052549 172.16.5.32 172.16.6.51 SMB Trans2 Response, QUERY_PATH_INFO, Error: STATUS_OBJECT_NAME_NOT_FOUND 101 0.196345 172.16.6.51 172.16.5.32 TCP wfremotertm > microsoft-ds [ACK] Seq=7212 Ack=9054 Win=64327 [TCP CHECKSUM INCORRECT] Len=0 102 1.828327 172.16.6.51 172.16.5.32 SMB Trans2 Request, QUERY_PATH_INFO, Query File Basic Info, Path: \krm\10\coe\00341914 103 1.828856 172.16.5.32 172.16.6.51 SMB Trans2 Response, QUERY_PATH_INFO 104 1.828997 172.16.6.51 172.16.5.32 SMB Trans2 Request, FIND_FIRST2, Pattern: \krm\10\coe\00341914\* 105 1.829852 172.16.5.32 172.16.6.51 SMB Trans2 Response, FIND_FIRST2, Files: . .. account.txt default.css default_lft.htm default_top.htm 106 1.862724 172.16.6.51 172.16.5.32 SMB Trans2 Request, QUERY_PATH_INFO, Query File Basic Info, Path: 107 1.863859 172.16.5.32 172.16.6.51 SMB Trans2 Response, QUERY_PATH_INFO 108 1.863995 172.16.6.51 172.16.5.32 SMB Trans2 Request, QUERY_FS_INFO, Query Full FS Size Info 109 1.864254 172.16.5.32 172.16.6.51 SMB Trans2 Response, QUERY_FS_INFO 110 1.867993 172.16.6.51 172.16.5.32 SMB NT Create AndX Request, FID: 0x801f, Path: \krm\10\coe\00341914 111 1.868859 172.16.5.32 172.16.6.51 SMB NT Create AndX Response, FID: 0x801f 112 1.868939 172.16.6.51 172.16.5.32 SMB Trans2 Request, QUERY_PATH_INFO, Query File Internal Info, Path: \krm\10\coe\00341914 113 1.869859 172.16.5.32 172.16.6.51 SMB Trans2 Response, QUERY_PATH_INFO 114 1.870023 172.16.6.51 172.16.5.32 SMB Close Request, FID: 0x801f 115 1.870862 172.16.5.32 172.16.6.51 SMB Close Response, FID: 0x801f 116 2.006875 172.16.6.51 172.16.5.32 TCP wfremotertm > microsoft-ds [ACK] Seq=7911 Ack=10372 Win=65089 [TCP CHECKSUM INCORRECT] Len=0 117 5.845189 172.16.6.51 172.16.5.32 SMB NT Create AndX Request, Path: \krm\10\coe\00341914\desktop.ini 118 5.845691 172.16.5.32 172.16.6.51 SMB NT Create AndX Response, FID: 0x0000, Error: STATUS_OBJECT_NAME_NOT_FOUND 119 5.849592 172.16.6.51 172.16.5.32 SMB NT Create AndX Request, Path: \krm\10\coe\.svn\entries 120 5.850087 172.16.5.32 172.16.6.51 SMB NT Create AndX Response, FID: 0x0000, Error: STATUS_OBJECT_PATH_NOT_FOUND 121 5.850332 172.16.6.51 172.16.5.32 SMB NT Create AndX Request, Path: \krm\10\coe\00341914\.svn\entries 122 5.850684 172.16.5.32 172.16.6.51 SMB NT Create AndX Response, FID: 0x0000, Error: STATUS_OBJECT_PATH_NOT_FOUND 123 5.850970 172.16.6.51 172.16.5.32 SMB Trans2 Request, QUERY_PATH_INFO, Query File Network Open Info, Path: \krm\10\coe\00341914 124 5.851284 172.16.5.32 172.16.6.51 SMB Trans2 Response, QUERY_PATH_INFO ... ... 260 7.254823 172.16.6.51 172.16.5.32 SMB Trans2 Request, QUERY_FS_INFO, Query FS Attribute Info 261 7.255158 172.16.5.32 172.16.6.51 SMB Trans2 Response, QUERY_FS_INFO 262 7.255346 172.16.6.51 172.16.5.32 SMB NT Create AndX Request, FID: 0x0038, Path: \krm\10\reg\00341914\default.css 263 7.255764 172.16.5.32 172.16.6.51 SMB Locking AndX Request, FID: 0x0036 264 7.438442 172.16.6.51 172.16.5.32 TCP wfremotertm > microsoft-ds [ACK] Seq=17968 Ack=20912 Win=65320 [TCP CHECKSUM INCORRECT] Len=0 265 48.324739 172.16.5.32 172.16.6.51 SMB NT Create AndX Response, FID: 0x0038 266 48.324796 172.16.6.51 172.16.5.32 SMB Close Request, FID: 0x0036 267 48.325132 172.16.5.32 172.16.6.51 SMB Close Response, FID: 0x0036 268 48.325378 172.16.6.51 172.16.5.32 SMB Close Request, FID: 0x403b 269 48.325932 172.16.5.32 172.16.6.51 SMB Close Response, FID: 0x403b 270 48.325982 172.16.6.51 172.16.5.32 SMB Trans2 Request, QUERY_FILE_INFO, FID: 0x0038, Query File Standard Info 271 48.326331 172.16.5.32 172.16.6.51 SMB Trans2 Response, FID: 0x0038, QUERY_FILE_INFO 272 48.326417 172.16.6.51 172.16.5.32 SMB Close Request, FID: 0x4039 273 48.326730 172.16.5.32 172.16.6.51 SMB Close Response, FID: 0x4039 274 48.326796 172.16.6.51 172.16.5.32 SMB Trans2 Request, QUERY_FILE_INFO, FID: 0x0038, Query File Basic Info 275 48.327131 172.16.5.32 172.16.6.51 SMB Trans2 Response, FID: 0x0038, QUERY_FILE_INFO 276 48.327221 172.16.6.51 172.16.5.32 SMB Trans2 Request, QUERY_FILE_INFO, FID: 0x0038, Query File Stream Info 277 48.327532 172.16.5.32 172.16.6.51 SMB Trans2 Response, FID: 0x0038, QUERY_FILE_INFO 278 48.327658 172.16.6.51 172.16.5.32 SMB Trans2 Request, QUERY_FILE_INFO, FID: 0x0038, Query File Basic Info 279 48.327932 172.16.5.32 172.16.6.51 SMB Trans2 Response, FID: 0x0038, QUERY_FILE_INFO ... ... 305 48.339507 172.16.5.32 172.16.6.51 SMB Trans2 Response, QUERY_PATH_INFO 306 48.339607 172.16.6.51 172.16.5.32 SMB Trans2 Request, FIND_FIRST2, Pattern: \krm\10\coe\00341914 307 48.340332 172.16.5.32 172.16.6.51 SMB Trans2 Response, FIND_FIRST2, Files: 00341914 308 48.340560 172.16.6.51 172.16.5.32 SMB Trans2 Request, FIND_FIRST2, Pattern: \krm\10\coe\00341914\default.css 309 48.341348 172.16.5.32 172.16.6.51 SMB Trans2 Response, FIND_FIRST2, Files: default.css 310 48.476983 172.16.6.51 172.16.5.32 TCP wfremotertm > microsoft-ds [ACK] Seq=20044 Ack=23508 Win=64219 [TCP CHECKSUM INCORRECT] Len=0 311 71.621481 Dell_23:8c:aa Broadcast ARP Who has 172.16.5.32? Tell 172.16.5.46 312 80.105543 172.16.6.51 172.16.5.32 SMB Echo Request 313 80.105768 172.16.5.32 172.16.6.51 SMB Echo Response 314 80.261727 172.16.6.51 172.16.5.32 TCP wfremotertm > microsoft-ds [ACK] Seq=20097 Ack=23561 Win=64166 [TCP CHECKSUM INCORRECT] Len=0 315 81.667262 172.16.5.32 172.16.7.255 BROWSER Host Announcement EBMSWEB1, Workstation, Server, NT Workstation, NT Server, Backup Browser, Unknown server type:23 316 89.158636 172.16.6.51 172.16.5.32 SMB NT Create AndX Request, FID: 0x4037, Path: \krm\10\reg\00341914\default.css 317 89.159490 172.16.5.32 172.16.6.51 SMB NT Create AndX Response, FID: 0x4037 318 89.159574 172.16.6.51 172.16.5.32 SMB Trans2 Request, QUERY_FILE_INFO, FID: 0x4037, Query File Internal Info 319 89.159886 172.16.5.32 172.16.6.51 SMB Trans2 Response, FID: 0x4037, QUERY_FILE_INFO 320 89.160090 172.16.6.51 172.16.5.32 SMB Trans2 Request, QUERY_FILE_INFO, FID: 0x4037, Query File Stream Info 321 89.160288 172.16.5.32 172.16.6.51 SMB Trans2 Response, FID: 0x4037, QUERY_FILE_INFO 322 89.160494 172.16.6.51 172.16.5.32 SMB NT Create AndX Request, FID: 0x803a, Path: \krm\10\coe\00341914\default.css 323 89.161287 172.16.5.32 172.16.6.51 SMB NT Create AndX Response, FID: 0x803a 324 89.161417 172.16.6.51 172.16.5.32 SMB Trans2 Request, QUERY_FILE_INFO, FID: 0x803a, Query File Internal Info ... ... 359 89.176284 172.16.5.32 172.16.6.51 SMB Trans2 Response, QUERY_FS_INFO 360 89.177296 172.16.6.51 172.16.5.32 SMB NT Create AndX Request, Path: \krm\10\reg\00341914\default_lft.htm 361 89.177859 172.16.5.32 172.16.6.51 SMB Locking AndX Request, FID: 0xc02b 362 89.314349 172.16.6.51 172.16.5.32 TCP wfremotertm > microsoft-ds [ACK] Seq=23435 Ack=26651 Win=64501 [TCP CHECKSUM INCORRECT] Len=0 363 128.321948 172.16.5.32 172.16.6.51 SMB NT Create AndX Response, FID: 0x0000, Error: STATUS_SHARING_VIOLATION 364 128.322011 172.16.6.51 172.16.5.32 SMB Close Request, FID: 0xc02b 365 128.322342 172.16.5.32 172.16.6.51 SMB Close Response, FID: 0xc02b 366 128.322399 172.16.6.51 172.16.5.32 SMB Trans2 Request, FIND_FIRST2, Pattern: \krm\10\coe\00341914\default.css 367 128.323143 172.16.5.32 172.16.6.51 SMB Trans2 Response, FIND_FIRST2, Files: default.css 368 128.323196 172.16.6.51 172.16.5.32 SMB Close Request, FID: 0x4037 369 128.323543 172.16.5.32 172.16.6.51 SMB Close Response, FID: 0x4037 370 128.323606 172.16.6.51 172.16.5.32 SMB NT Create AndX Request, FID: 0x002c, Path: \krm\10\reg\00341914\default_lft.htm ... ... 430 128.354995 172.16.6.51 172.16.5.32 SMB Trans2 Request, QUERY_FS_INFO, Query FS Attribute Info 431 128.355332 172.16.5.32 172.16.6.51 SMB Trans2 Response, QUERY_FS_INFO 432 128.359217 172.16.6.51 172.16.5.32 SMB NT Create AndX Request, FID: 0x4038, Path: \krm\10\reg\00341914\default_top.htm 433 128.359754 172.16.5.32 172.16.6.51 SMB Locking AndX Request, FID: 0x8039 434 128.542367 172.16.6.51 172.16.5.32 TCP wfremotertm > microsoft-ds [ACK] Seq=27372 Ack=30445 Win=65248 [TCP CHECKSUM INCORRECT] Len=0 435 144.834297 Intel_0e:ff:c1 Broadcast ARP Who has 172.16.5.30? Tell 172.16.5.32 436 168.320647 172.16.5.32 172.16.6.51 SMB NT Create AndX Response, FID: 0x4038 437 168.320715 172.16.6.51 172.16.5.32 SMB Close Request, FID: 0x8039 438 168.323647 172.16.5.32 172.16.6.51 SMB Close Response, FID: 0x8039 439 168.323705 172.16.6.51 172.16.5.32 SMB Trans2 Request, FIND_FIRST2, Pattern: \krm\10\coe\00341914\default_lft.htm 440 168.324448 172.16.5.32 172.16.6.51 SMB Trans2 Response, FIND_FIRST2, Files: default_lft.htm ... ... 501 168.374201 172.16.6.51 172.16.5.32 SMB Trans2 Request, QUERY_FS_INFO, Query Full FS Size Info 502 168.374450 172.16.5.32 172.16.6.51 SMB Trans2 Response, QUERY_FS_INFO 503 168.575055 172.16.6.51 172.16.5.32 TCP wfremotertm > microsoft-ds [ACK] Seq=30665 Ack=33759 Win=65065 [TCP CHECKSUM INCORRECT] Len=0 Tag: internet explorer 7 will not connect to the internet Tag: 289014
  - 5
    - Local Network or Internet? My workgroup consists of three computers, 2 Laptops connected to a router/modem wireless, and a Desktop connected to the router via cable. I created the workgroup by using the wizard. When I check "My network places" they are all in the Internet and not in a Local Network. Should they not all be in a local network? -- Stef Tag: internet explorer 7 will not connect to the internet Tag: 289012
  - 6
    - problem in WinXP sp3 when using network neighborhood Hi, Recently, I updated 2 pcs into SP3. But, I found when I click the "network neighborhood". It is okay and showing the window. However, after closed the "network neighborhood" window and re-click again. Since, I always need to use that function in sharing files with other PCs. In other SP2 PCs, there is no such problem. Does the problem cause by SP3? Any solution is to solve it? Or, downgrade to SP2? Thanks Tlee Tag: internet explorer 7 will not connect to the internet Tag: 289011
  - 7
    - telnet.exe logging in anomaly I am not sure if this is an anomaly.. but it happened today when I was messing with telnet. SFS off. So, using AFS. So, Classic user authentication. CompA, CompB. CompA connecting to CompB. Both had an account called Admin (matching passwords, prob matching fullname) To connect, I guess it logs in as whoever is logged in on CompA. So I was running telnet.exe from the command prompt, and using RunAs (in a bat to speed things up). So I could launch a command prompt as Admin for example, and then do telnet compB 23 If the Admin account on CompA was made Limited/LUA. i.e. removed from the administrative group, (CompB's Admin account, is Administrative) Then I found that in order to log on onto compB, CompB had to be logged in as Admin. If CompB was logged in as anybody else, be it, built in administrator (which is administrative). Or, as some limited user. CompA could not connect to it. I would get an error "Failure in initializing the telnet session. Shell process may not have been launched..........", when I tried to connect and CompB was not logged in as Admin locally. I think it gave that error message repeatedly e.g. 3 times in a row if I tried 3 times. So that was where CompA had Admin limited. compB had it administrative. But after alot of fiddling around, I am not sure what changed things, but now Admin acts like the other accounts. I can't reproduce the behaviour. Even if CompA's Admin account is limited it still works . Any ideas what would cause that? note- regarding that Failure error message, I managed to cause it another way, which eventually I couldn't reproduce. I found that if I made the Admin account non administrative on the remote machine, and logged in locally on the remote machine, as Admin, then it could not read the Admin folder. With that symptom, the other symptom was that when I logged in remotely as Admin, it would give the failure message. (note- with that cause of that failure, I think it only gives that error once or twice.. if you keep trying to log in, it logs in as TMP and as Admin.001 and things. And so I then fixed the Admin account to point to the Admin directory, restarted windows 'cos you have to. ) It's not of great practical consequence.. though useful to know how it is working. But it does mean that You can get failure messages the other odd behaviour described when connecting CompA to compB, and one of them is Limited the other Administrative. So it's nice to know a cause for that.. Since I got it in win xp 32- bit, and the windows kb article said it was a 64-bit thing. The KB article suggested something involving something like starting and stopping and unregistering and registering tlntsvr. (one might have to start it through the gui not command line, when I tried it I got an error from command line when starting it). It didn't make a diff for me anyway. The other thing I found was to make sure that the service "Secondary Login" was started (some people had their disabled or disabled theirs because a windows 2k3 security book or something said to) That didn't apply to me either, since mine was started anyway. Tag: internet explorer 7 will not connect to the internet Tag: 289004
  - 8
    - hungs in applying computer settings I am working on WinxpSP2 workstation that works fine when not joined to our domain, when joined to domain, it reboots and goes through applying network settings, then it hangs at "applying computer settings", I waited for 1 hour and nothing happened If rebooted in "Safemode and network" I am able to login and access network AD has OU's per organizations, they push policies to any new wks, also there is an OU for techsupport that do not push any policy This wks freezes when joined to any organizational OU Have no problem when joined to OU for techsupport Is there anything in policy that I need to check/change? Any help will be appreciated. Tag: internet explorer 7 will not connect to the internet Tag: 289003
  - 9
    - Desktop.ini in mapped drives I have an samba server on my network. I tryed to copy an desktop.ini to one folder and it doens't work. How do i fix this ? PS: Excuse for my poor english =/ Tag: internet explorer 7 will not connect to the internet Tag: 289001
  - 10
    - Networking I have two computers which I want to connect using a cable. At the moment I'm using Ethernet connections for both to access the internet. How do I connect both computers if the Ethernet sockets are being used? Any advice please and please make it simple cos I'm old and thick. Thanks Tag: internet explorer 7 will not connect to the internet Tag: 288997
  - 11
    - Network Traffic Log Is there any software out there (or in Windows XP SP2 Home Edition) that I can use to log traffic on a home network, including all wireless traffic amongst 4 computers (one of which is a Mac laptop), a printer, and a wireless basestation? I am only interested in looking at the traffic on the home network controlled by the wireless router. I am interested in knowing which computer/device is initiating communication on my home network but from the logs I have access to, I only seem to see those log entries associated with initialization of a device. These logs are located within the Norton Securiry Software I have installed on three of the four computers. thanks. Doug Tag: internet explorer 7 will not connect to the internet Tag: 288995
  - 12
    - connect a pc to a laptop hello, i have a personal computer running win XP and lap top running win XP i just want to connect the laptop to the pc, to transfer some documents to the laptop. how should I connect them both using ethernet cards, i have an ethernet cable also. I dont' want any internet connection on any one, just want to connect both through a single ethernet wire nothing else, so how should do it? give me some steps... Tag: internet explorer 7 will not connect to the internet Tag: 288993
  - 13
    - Internet access in a LAN We are using a LAN of 45 Computers. Most using Windows XP as OS and few Windows 2000. and we have a Broad Band Internet Connection in a Host Computer (Windows XP). And all other computers in this LAN now accessing internet. My question is that ... we need only a few computers can access Internet while maintaining this LAN ( All Computers can communicate locally but few computers can access Internet) Tag: internet explorer 7 will not connect to the internet Tag: 288985
  - 14
    - Timing out a client side deviceless connection Can anyone tell me if there is a way to time out a deviceless connection on the client side? I understand that the server side will timeout after a default of 15 minutes, but this does not help me. I don't need the deviceless connection to persist during the users logon session on the client side. I need it to timeout to force the user to authenticate again, because the next connection could possibly be a different user. The PC is a domain member and is auto-logged on to a local generic account on the PC and not to a domain account. This is necessary because this is a multi-user PC for our hospitals surgery department with one single LOB application loaded that connects back to the server with it's own user management. This application is used to chart surgical cases that may last longer than the nurses shift, so someone else comes in and continues charting the case. The software is on the PC (instead of a terminal server session) because if for some reason the PC losses connection to the server, the case charting software continues charting in local cached mode and will upload the information when the server becomes available again, thus the charting software must always be available during the case. But there are times where the user needs to connect to domain resources. So, our IT surgical support person has placed shorcuts to the necessary resources on the "All Users" desktop of the 11 operating room PC's that we have (as opposed to creating the shortcuts on each of the 70 support staffs desktops in their profiles and any new users that come along) What I need to happen is an authentication request to take place each time the resource is opened up. This happens with the first connection attempt because the account performing the connection is not a domain member and an authentication request takes place. The user will login with his own username and password which provides us with accountability (instead of the PC being logged on with a generic domain account with access to the resources). But once the user closes the resource, subsequent connection attempts occur under the last successfully authenticated user, even though their shift may have ended hours ago and the PC's logon session is still ongoing for another person who has come along to continue charting the surgical case. If you go to disconnect network drives, you see a deviceless connection that you can disconnect and this will force an authentication the next time the resource is accessed. How can I have this connection either locally disconnect after a length of time (as opposed to the server disconnecting after the default 15 minutes and still leaving the deviceless connection on the client side), or prevent the logon credentials from being cached (via the client side deviceless connection) for that connection so when the resource is closed, new connections must authenticate again? If this cannot be done via XP, can it be done in Vista? -- Thanks, Leonard (Bones) McCoy Tag: internet explorer 7 will not connect to the internet Tag: 288979
  - 15
    - response time (for failure) is slow when accessing share and computer if I double click a network share e.g. "My Network Places" dirblah on GREYCOMP and GREYCOMP is off. It takes ages to realise it.. The window even crashes with a "not responding".. (same if I have a mapped drive to the network share and double click that) And if I double click it again, it does the same s-l-o-w- response again, not just a slow response, but windows looks unhealthy at the time. I can't click .any icon within the "My Network Places" after I have clicked a share where the remote computer where the share is, is off. (it is acting as if there is great cpu or ram utilization, though I don't think there is, but it's not a nice symptom). Is there a way to make it timeout quicker ? Yes, it should fail and give an error, but quicker. And pref without the bad behaviour. Tag: internet explorer 7 will not connect to the internet Tag: 288977
  - 16
    - problem copying powerpoint files through network I have 2 computers, both Windows XP and for some reason I cannot copy or move powerpoint files (.ppt) from one to the other. I can move everyting else, graphics, documents etc. Any suggestions. This is a wired network not wireless. Tag: internet explorer 7 will not connect to the internet Tag: 288974
  - 17
    - Problem to create a home network Hi My system consists of 3 PC's, 1 desktop and 2 laptops. All connected to a Netgear RangeMax Next router DG83N. The Laptops wireless and the desktop with cable. All machines run Windows XP SP3. I think it all worked fine before I updated to SP3. Problem: The Laptops communicate with each other but the desktop is not seen anywhere. Printer and scanner are conncted to the desktop. All units connect to the internet independently. I have run the guide several times and checked all settings but I cannot get it work. Would be grateful if someone could help me with this problem. Stef -- Stef Tag: internet explorer 7 will not connect to the internet Tag: 288971
  - 18
    - ICS: Everything works except sending mails I'm at a friend who uses WLAN to connect his Windows XP SP 2 (Home) laptop to the Internet. I've setup Internet Connection Sharing (ICS) on his laptop and connected my Windows XP SP 2 (Pro) laptop with an Ethernet cable. I can use various Internet services successfully except one: If I want to send a mail in Outlook the program tells me that no connection could be established with the mail server. I know it's wrong as I can receive mails from the mail server successfully. As I've a few accounts in Outlook I also know that this problem is not related to one mail server. In fact I can't send any mail currently at all (no matter what account and mail server I try to use). I've setup ICS a couple of times before successfully. If there was a problem the Internet connection normally just didn't work at all. It's the first time that I see all Internet services working and accessible except one. Any ideas what could cause the problem? I tried already to switch off an anti-virus program on my friend's laptop and even shutdown my own anti-virus program but it didn't help so far. Boris Tag: internet explorer 7 will not connect to the internet Tag: 288969
  - 19
    - Ethernet over USB Hello, I am working on a project where I want to connect my Windows desktop to a Linux embedded computer I am working with using ethernet over USB. For example, I want both computers to be able to ping each other from the command line over the USB cable (I can currently do this with the ethernet cable I have connecting them). I have heard that Windows has some native support for ethernet over USB, but I don't know more than that (i.e. what drivers to use, how to set them up, etc.). Thanks, Peter Tag: internet explorer 7 will not connect to the internet Tag: 288963
  - 20
    - repair to get rid of a network Guys, I need to get rid of a network because my computer is a total mess ever since I connected my PC to my notebook. As I found out deleting a network is not possible so my thought was repairing XP. The question is: will that solve the problem or will the network still be there? If so, would a re-install do the trick? Thanks a lot in advance for your help! Tag: internet explorer 7 will not connect to the internet Tag: 288959
  - 21
    - Internet connection times out System running XP sp3. Internet is DSL. Everytime my friend connects to the internet it is fine for 10-15 mins and then just stops saying that the connection has timed out. If you restart the computer it does the same again. Both connections tried work fine on all other computers. I tried his computer at my house and still had the same problem. I have tried uninstalling and reinstalling the network adaptor drivers, uninstalling and re-installing Internet explorer and firefox, setting up a new connection, i have also tried installing a different network card. I am now at a loss as to what to check next. The last time this happened i was downloading an updated driver for his netwrok adaptor and, although the internet would not work, the download continued. Any ideas. Tag: internet explorer 7 will not connect to the internet Tag: 288947
  - 22
    - Byte differences... Hello all, Recently I've built a machine and decided on moving files from one machine to the other through the use of two ethernet cables and a router. I shared the data from the old computer and the new computer found the old in Network Neighborhood, I then simply copied the files to the new. The data consists of numerous files housed in several folders. To do a very very lazy and basic integrity check, I compared the folder sizes from the old and new machine. Since they house the same files, the same folders, they should be identical right? Now I'm in a bit of a dilemma. I noticed discrepancies, bytes that are unaccounted for. The differences seem arbitrary, on one folder there are 199 less bytes, in another there are 1,304,200 more bytes. The number of files and folders are identical for every folder transferred. What could cause a loss or gain of bytes after transfer without loss of files or folders? 1. The first time I noticed a discrepancy on the first folder I transferred, I changed some attributes of the original folder, deleted the one that made it through and transferred again. The folder came out identical in both "Size" and "Size on Disk". I do not know why this occurred. 2. Since then every folder to come out on the other side has a discrepancy either in the "Size" or "Size on Disk" values. 3. I removed the internet cable from the router to remove possible internet problems from the equation during transfer. The only parties to the transfer were the two computers and the router. 4. I've tried transferring a single folder over and over to see if random discrepancies occur in size to show some kind of corruption is occurring through travel. The result? Only a static discrepancy (if the folder made it through first time with 199 bytes less, every subsequent transfer of same folder yields same result). 5. The total size, roughly more than fifty gigabytes transferred. Does anyone have any idea what could be going on here? 1. Could data have been corrupted through travel? 2. Could it be something like alternate data stream files such as thumbnails that were left behind? Though this doesn't explain why some files grew in bytes, or does it? 3. Is it safe and reliable to transfer files like I just did or is this why my result is like this? Tag: internet explorer 7 will not connect to the internet Tag: 288938
  - 23
    - Loss of Bytes... Hello all, Recently I've built a machine and decided on moving files from one machine to the other through the use of two ethernet cables and a router. I shared the data from the old computer and the new computer found the old in Network Neighborhood, I then simply copied the files to the new. The data consists of numerous files housed in several folders. To do a very very lazy and basic integrity check, I compared the folder sizes from the old and new machine. Since they house the same files, the same folders, they should be identical right? Now I'm in a bit of a dilemma. I noticed discrepancies, bytes that are unaccounted for. The differences seem arbitrary, on one folder there are 199 less bytes, in another there are 1,304,200 more bytes. When there are less bytes, the difference is in the "Size" value when you go to the properties for that folder. When there are more bytes than there should be, it's in the "Size on Disk" value. The number of files and folders are identical for every folder transferred. What could cause a loss or gain of bytes after transfer without loss of files or folders? 1. The first time I noticed a discrepancy on the first folder I transferred, I changed some attributes of the original folder, deleted the one that made it through and transferred again. The folder came out identical in both "Size" and "Size on Disk". I do not know why this occurred. 2. Since then every folder to come out on the other side has a discrepancy either in the "Size" or "Size on Disk" values. 3. I removed the internet cable from the router to remove possible internet problems from the equation during transfer. The only parties to the transfer were the two computers and the router. 4. I've tried transferring a single folder over and over to see if random discrepancies occur in size to show some kind of corruption is occurring through travel. The result? Only a static discrepancy (if the folder made it through first time with 199 bytes less, every subsequent transfer of same folder yields same result). 5. The total size, roughly more than fifty gigabytes transferred. Does anyone have any idea what could be going on here? 1. Could data have been corrupted through travel? 2. Could it be something like alternate data stream files such as thumbnails that were left behind? Though this doesn't explain why some files grew in bytes, or does it? 3. Is it safe and reliable to transfer files like I just did or is this why my result is like this? Tag: internet explorer 7 will not connect to the internet Tag: 288937
  - 24
    - Loss of bytes... Hello all, Recently I've built a machine and decided on moving files from one machine to the other through the use of two ethernet cables and a router. I shared the data from the old computer and the new computer found the old in Network Neighborhood, I then simply copied the files to the new. The data consists of numerous files housed in several folders. To do a very very lazy and basic integrity check, I compared the folder sizes from the old and new machine. Since they house the same files, the same folders, they should be identical right? Now I'm in a bit of a dilemma. I noticed discrepancies, bytes that are unaccounted for. The differences seem arbitrary, on one folder there are 199 less bytes, in another there are 1,304,200 more bytes. When there are less bytes, the difference is in the "Size" value when you go to the properties for that folder. When there are more bytes than there should be, it's in the "Size on Disk" value. The number of files and folders are identical for every folder transferred. What could cause a loss or gain of bytes after transfer without loss of files or folders? 1. The first time I noticed a discrepancy on the first folder I transferred, I changed some attributes of the original folder, deleted the one that made it through and transferred again. The folder came out identical in both "Size" and "Size on Disk". I do not know why this occurred. 2. Since then every folder to come out on the other side has a discrepancy either in the "Size" or "Size on Disk" values. 3. I removed the internet cable from the router to remove possible internet problems from the equation during transfer. The only parties to the transfer were the two computers and the router. 4. I've tried transferring a single folder over and over to see if random discrepancies occur in size to show some kind of corruption is occurring through travel. The result? Only a static discrepancy (if the folder made it through first time with 199 bytes less, every subsequent transfer of same folder yields same result). Does anyone have any idea what could be going on here? 1. Could data have been corrupted through travel? 2. Could it be something like alternate data stream files such as thumbnails that were left behind? Though this doesn't explain why some files grew in bytes, or does it? Tag: internet explorer 7 will not connect to the internet Tag: 288936
  - 25
    - Wireless adapter IP address with no network Can anyone guide me to some type of slution? I am working on setting up a 802.11N network in Windows XP pro. I am trying to use USB adpaters (D-Link and Linksys) for the PC and I am connecting to a 11n router (D-Link.) Every time I connect one of the wireless adapters, it gets an IP address but have no network / Internet access. Tag: internet explorer 7 will not connect to the internet Tag: 288934
- Next
  - 1
    - Windows can't configure wireless connection My Dell laptop with XP Home loses the setting for Windows to connect wireless. I have to reset each time by doing "run" , "services.msc", then click on "Start" under Configure Zero Wireless Connection. The problem may in that window, "Apply" is dimmed so I can only click OK. Any ideas what's the matter with that setting? -- mickey Tag: internet explorer 7 will not connect to the internet Tag: 288933
  - 2
    - XP Can't Connect to Network I've got two machines, one with VistaSP1 and one with a brand new install of XPSP3. They both run over wire to a D-Link 4-port router and then into my Comcast cable modem. Vista machine can connect to the Internet without a problem, but as far as I can tell, XP machine can't connect to or even ping the router. Strange thing was, the XP machine used to have Vista insalled on it and it worked flawlessly. Only after repartitioning the HDD and dropping XP onto it does it no longer work. I've tried the built-in help system for XP and a couple of the articles here on the MS site with no luck. Any ideas? Tag: internet explorer 7 will not connect to the internet Tag: 288930
  - 3
    - Problem with Network Places Laptop XP Pro networked with PC XP Home via wireless router and Ethernet. If I click Network Places on the laptop and there is some fault that prevents it getting to the PC (e.g., router or PC off), the Network Places window freezes up. If aborted in Task manager the contents of the desktop all disappear including Start button and task bar. Any programs with visible windows still work but nothing else can be accessed. Explorer can be restarted using Task manager but why should this be necessary? Is there some setting somewhere that will cause Network Places to time out if it cannot get to the remote places? It seems a particularly stupid piece of design if it doesn't even do a ping first. I know I could do a ping first but why should *I* need to!? (BTW it doesn't seem to happen with the PC XP Home.) Thanks Derek Tag: internet explorer 7 will not connect to the internet Tag: 288928
  - 4
    - Win XP Pro SP1. Cannot create new connection. Hi, I have reinstalled Win XP Pro onto an existing PC. It should be a clean install, because I did a full disk re-format as part of the installation. It has installed SP1. The installation is OK, except I cannot connect to the LAN. There is a 1394 Connection which is "enabled" and "connected". However I cannot create a new LAN connection. I follow the "Create a New Connection" wizard, all looks fine, but when I reboot (as requested) there is no new connection. Other Windows & Linux machines on the same LAN work fine, using either DHCP or fixed IP address. I tested the PC itself by booting Linux from a CD - the LAN connection works fine therefore the hardware is all OK. The account I am using is an admin, with no password. The firewall appears to be off (although I can't find where you might change that). What should I do now ??? Thanks, -- Les Russell Tag: internet explorer 7 will not connect to the internet Tag: 288916
  - 5
    - network disconnected automatically - how to change the setting? I use remote desktop a lot. But recently, not sure if it is due to a recent windows xp update, the network of my romote computer got disconnected automatically after a few hours if not used. I had to call people in my office to move the mouse or keyboard a little bit so that the network can be activated and reconnected. Did anyone get the same problem? Is there anyway I can change the network setting so that it won't become disconnected automatically? Thanks! Tag: internet explorer 7 will not connect to the internet Tag: 288915
  - 6
    - How to connect to computer-to-computer network? Hi, I was away from home and tried to piggyback on someone elses wireless connection. I found two "Unsecured computer-to-computer networks". One was even named "Free Public WiFi". Signal strength to both was good (4 bars and 3 bars). When I tried to connect, Windows took a long time and then said I was Disconnected. However, in the text it said I WAS connected. In actual fact I was NOT. What's the deal with these computer-to-computer networks? How do you connect? One strange thing is that when I got back home those two networks still show up! I've tried refreshing the network list but can't get rid of them. The "normal" networks (not computer-to-computer) have changed to reflect the new location. What is happening? Thanks, Frank Tag: internet explorer 7 will not connect to the internet Tag: 288908
  - 7
    - Can dhcp client service be restarted from the command line? Hi All, Is there a way, from the command line, that I can stop and restart the "DHCP Client" service? Many thanks, -T Tag: internet explorer 7 will not connect to the internet Tag: 288907
  - 8
    - Dumb Blond needs Network Advice Hi everybody, I'm ready to try networking. Here's what I've got: 1. Comcast cable using their Motorola Surfboard SB5101 cable modem. 2. Desktop PC built in 2000 with some upgrading; cable from PC attaches to the Motorola cable modem. NO wireless card on this computer. OS = Win XP Home 3. Vaio laptop w/wireless card (.11b). OS = Win XP Home 4. Toshiba laptop w/wireless card (at least .11b) OS = Win XP Media Center 2005 5. Inkjet printer w/parallel & USB ports, currently connected to desktop via parallel 6. Samsung laser printer w/USB and wireless ability 7. Scannner w/USB 8. External HD for storage Idea: Combine Cable Modem & Wireless into one peripheral -- I'm looking at the Motorola Surfboard SBG900. One review said it was not intuitive to set up the wireless and the security. I know nothing about these things, so will need guidance. Question: Are there other cable modem/wireless router combo peripherals on the market? I've googled and haven't found any, or else don't know the right lingo. My goals: * maintain HIGH security. I do some paralegal work and do not want anybody else to pick up my files. Clients deserve confidentiality * transfer files between the three computers via wireless or ethernet. * print to the laser printer from any computer * use the laptops in the living room or on the porch (25 feet) and be able to print and transfer files via wireless * not have any of the devices conflict with each other or with the telephone. * most data is text files and graphics (up to 25 megs), plus web and email. No games, TV, DVDs. I'd like suggestions on what kind of cable modems/wireless routers to get. An all-in-one would be nice. Simple setup is important. Simple configuration is important. I'd like advice on what to be careful of, given the kind of equipment I have. Thank you for your suggestions! Lady Dungeness Out of Danger until September ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ Tag: internet explorer 7 will not connect to the internet Tag: 288904
  - 9
    - Trouble with shared folders Hello, Got a network with 3 computers all running XP Home edition, SP3. Lets name them A, B, C. A is directly connected to the internet through a wireless ADSL router, B and C connect wirelessly as clients to the wireless router. Gateway is 192.168.1.1. A has fixed IP 192.168.1.2, B fixed 192.168.1.3 and C 192.168.1.11, all same subnet mask and all part of the same workgroup. I have shared forlders in all PCs and what happens is the following. From A I can see the shares of A, B, C. From B I can see the shares of A and C. But from C, I can only see the shares of C, nothing else. They are not appearing in network places, they dont even appear when I explore entire network, under workgroup name. Only C is found there. I can ping from all computers, all IPs and I get no errors whatsoever. C in particular, can ping A and B. I am using a remote desktop control software in all 3 computers and it works perfectly, with the local network IPs. Any idea of what can be causing the problem at C or even maybe at A and B not "broadcasting" the shared folders? Please let me know if you need any additional info regarding what is installed on each computer. Thanks Tag: internet explorer 7 will not connect to the internet Tag: 288898
  - 10
    - Unable to join windows 2000 workstation to domain when i try to join i get the following error: network identification the following error occurred validating . this condition may be caussed by a dns lookup problme. the specidfied domain either does not exists or could not be contacted. it is a windows 2000 domain controller. does anyone have suggestions on how to resolve this problem? thanks Tag: internet explorer 7 will not connect to the internet Tag: 288896
  - 11
    - Switch easily between DHCP and Fixed IP on Notebook I use wireless at home and when travelling on my notebook. For some reason AT&T insist on having fixed IP addresses at home and on the road it's all dynamic of course. Surely there is an easy way to switch between the 2 profiles in Win XP without having to go and change the actual network setting every time? Thanks Tag: internet explorer 7 will not connect to the internet Tag: 288887
  - 12
    - XP Pro and Home won't allow access I have windows XP Pro on one computer (call it "A") and XP Home on another computer (call it "B"). they are connected together via a linksys router (ethernet cables). both computers have all of their drive letters set up for file sharing (including allowing to change files on the network). When I click under "my network places" on each computer, both computers show up. And under A's "my network places" where it lists the "B" computer, I can access B's drives via the A computer. However, on the B computer under my network places, when i try to access the drives on the A computer (in fact just double clicking on the name of A computer) gives the error "[computer name] is not accessible. You might not have persission to use this network resource. Contact the administrator of this server to find out if you have access permission. The network path was not found." But all of the drives on A computer are set up for file sharing with permission to change files. And on the B computer I pinged the IP address of the A computer and it came back as having made the connection. What do I do? Tag: internet explorer 7 will not connect to the internet Tag: 288886
  - 13
    - Wireless no longer working on after Windows automatic update While the wired connection works fine, My wireless connection seems to have stopped working after the automatic windows update yesterday. I have a Toshiba Satelite A105 laptop, with Windows XP Home Edition SP2. The list of wireless networks comes up fine, but when I try to connect to my wireless network it's not working. It just says "waiting for network", then it refreshes the wireless list and does nothing. While it says it's waiting, the little wireless symbol in the system tray does nothing however, it just stays there with the X on it. Any ideas how I can troubleshoot this problem? Thanks, -Tony Tag: internet explorer 7 will not connect to the internet Tag: 288883
  - 14
    - Another "VPN Sign-on Keeps Popping Up" I have a VPN connection that I use intermittently, and it has started trying to connect every time I change webpages. It has "Never dial a connection" checked. It seems to think this is the default connection... when the only default should be the wireless connection (which does NOT have the ability to be selected as default). How do I prevent the VPN connection from being the default? Thanks. Tag: internet explorer 7 will not connect to the internet Tag: 288878
  - 15
    - 1 out of 6 PCs cannot connect to My Network Places Hi I have a network of 6 computers via wired router. I am only able to access 5 out of the 6 PCs on My Network Places. The 1 computer in question: - I have run the 'Set up a home or small office network' wizard but I still cannot see the files/folders of the other PCs. - I have successfully connected to the internet via the network - When I click 'view workgroup computers', nothing appears - When I click 'view workgroup computers' from any of the other PCs, I am only able to see the PC I am having a problem with but unable to view/access the files/folders when I double click on the icon. I would appreciate your help in helping me to solve this problem. Thanks k8an Tag: internet explorer 7 will not connect to the internet Tag: 288877
  - 16
    - network network security is main for this how i protect it.. ------------------------------------------------------------- 'Residential Mortgages and Re-Mortgages' (http://tinyurl.com/3lqrw7) ' personal finance articles' ( http://www.myfinancebutler.com) -- Thomas Hood Tag: internet explorer 7 will not connect to the internet Tag: 288874
  - 17
    - NET WORK PROBLEM SHARING PRINTER I presently have two computers , one with windwos xp home ,the other with windows xp professional. I run my internet to both of them using a router. I want to share a printer between thwe two. I tried using network wizard to set a network between the two computers. set everything up as requested. Using the same workgroup.when running the one with xp pro the program seemed to work but when I ran the network wizard and the xp home computer it stopped and gave an error and cannot complete setup. I turned the printer on to share but when I go back to ad printers and check the printer showed as not shared and cannot chane it to share. I get a message stating Printer setting could not be saved Operation could not be completed. Any Help would be appreciated Tag: internet explorer 7 will not connect to the internet Tag: 288869
  - 18
    - IE cannot show my updated program! Does anyone have any suggestions on how to solve following problem? I am running a tomcat program with database, and using IE as an interface. I have run this program before, and the text is too large with wrong description, so I change it, but when I run this program again, the text does not change, even through I have checked the JSP script with no error, the IE still show the previous version of JSP results. Does anyone have any suggestions? Thanks in advance for any suggestions Eric Tag: internet explorer 7 will not connect to the internet Tag: 288862
  - 19
    - Apps cannot access internet On my laptop, wireless connection, none of my applications can access the internet. I do not recall making any changes to any settings that could have made this occur. I've tried both IE and FF and triple checked the proxy settings. iTunes, other applications also cannot access. The wireless connection indicates signal good and connected. I disabled Zone Alarm and rebooted with the same results. Also ran the MSFT TCP/IP stack reset tool to no avail. Any brainstorming troubleshooting ideas? Tag: internet explorer 7 will not connect to the internet Tag: 288858
  - 20
    - XP Pro to XP Home wireless network I have two laptops at home, mine running XP Home edition and one from work running XP Professional, which is on the network at work through a VPN (once I log in). Both are connected to my cable modem by a wireless router, connecting wirelessly without problems. What I want to do seems simple: I want to operate one computer from the other, that is, I'm at the work laptop all the time and have it connected to my extermal mointor and so on, and I'd like to be able to access the home laptop from the work laptop. I've tried networking and nothing works, after following step by step instructions to install an app from Microsoft called "network setup" it told me it can't because the work machine is "on a domain". I've tried various other things and the closest I've gotten is logging into the one computer from the other over the Internet (Citrix remote pc) but it's slow and not what I need. Any advice welcome. Thanks. Tag: internet explorer 7 will not connect to the internet Tag: 288857
  - 21
    - Had two of the same IP's, how do I clear the damage? Hi All, I set up an OpenVPN tunnel between two sites. I goofed and had the same IP address (192.168.255.100) on each end. I have corrected the problem. Problem: every machine on the network works fine with the new IP addresses (192.168.255.100-local, & 101-remote), except the original machine (192.168.255.50) I was doing the testing on. It can not see the 192.168.255.101 at the remote location. (Everyone else can, but not .50) Is it possible that its routing tables are messed up? How do I do a mass clear and start over? How do I clear the damage? Many thanks, -T Tag: internet explorer 7 will not connect to the internet Tag: 288845
  - 22
    - Belkin Wireless Router Trouble I have a Belkin Wireless Router that I use to wirelessly hook in to m home network, while I'm wired to my Xbox 360 in the other room. I hav absolutely no trouble connecting immediately, and I get great speed, bu it constantly looks for a certificate to log me on, and never finds it and it will from time to time, pop up a message telling me that window was unable to find a certificate to log me on to the server. It's jus driving me nuts that it won't just connect already. If I mouse over th icon in the task bar, it says excellent signal strength, but it' validating identity Please Help Thanks Travi Tag: internet explorer 7 will not connect to the internet Tag: 288836
  - 23
    - I accidently deleted Wireless Connection Icon I am stupid (beat ya to it) but I accidently deleted my Wireless Connection Icon in my Network Connections window. How can I replace it? Tag: internet explorer 7 will not connect to the internet Tag: 288826
  - 24
    - Problem sharing external (USB) drive with XP Pro I have a home LAN consisting of an XP nPro (XPP) desktop, an XP Home (XPH) desktop, a Vista wireless laptop and an Ubuntu wireless desktop. XPP and XPH have external USB drives in addition to their internal ones. I have set up sharing using the article by Ron Lowe and Steve Winograd at <http://www.practicallynetworked.com/sharing/xp_filesharing/whole.htm>, but while the XPP external drive is visible from the other computers, it is not accessible. Simple file sharing is off at XPP and the Guest account is disabled. Each machine has an account with the same username. I've gone through the Lowe/Winograd article and I'm pretty sure I've done everything they say, but I still get that "you don't have permission..." error message. Troubleshooting suggestions will be appreciated. Thanks. Tag: internet explorer 7 will not connect to the internet Tag: 288812
  - 25
    - Lose control of ICS connection from client - only reboot gets it b I have a desktop running XP SP2 whose internet connection I share. I specified that clients could control that connection. That way lazy old me can sit at my laptop (XP and SP3) and dial out. It works just fine - most of the time. Sometimes, generally after having my laptop come out of standby or hibernate, I can no longer control the connection. Network Connections does not even show the connection (which it normally does). One really bizarre aspect is that if my better half has already started the connection on the desktop, I can still get out to the internet from my laptop, even though I cannot see it in Network Connections, and it does not show up on the task bar, either. So far, the only way I can get control and visibility back is to reboot the laptop. I don't have to reboot the desktop that has the connection that is being shared. Obviously, I would rather not have to do that. Is there some other way I can kick-start the access to the ICS? By the way, even though the laptop now has SP3, this happened under SP2 as well. The network connection between the laptop and the desktop is a Linksys wireless router, if that matters. I have tried rebooting said router to see if that fixes the problem, but it does not. Thanks. Tag: internet explorer 7 will not connect to the internet Tag: 288808

I am running windows xp home with sp2. My internet currently works in Firefox
(I am posting this from firefox), but when I try to open internet explorer, I
get a message saying "Internet Explorer cannot display the webpage." I have
run many adware finding programs and they are coming up empty. I believe it
is more than internet explorer because programs like the zune software cannot
connect to the marketplace, and Steam can't display the shop either. Any time
my computer needs to use internet explorer for software, it completely dies.

Any help would be appreciated greatly.

Top