export vpn profile

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Mysterious incoming net packets keep waking up systems I have three offices where there's a server and a number of stations and all are set to go to standby, but to be able to be awakened if I use RDP to connect for remote admin. But in the one office the systems wake up a few seconds after going to sleep. I've narrowed it down to something coming in from the internet, apparently with packets capable of waking the systems up. In the network card settings there's a selection for it can be woken by the "magic" frame or the "wake up" frame. I forget which, but one type is apparently what RDP triggers. If I turn off that kind of wake up the system stays in standby but then I can't wake it remotely. I have a nice router and switch which can probably tell me more than I know how to use, but there is a small, steady stream of unicast packets coming in from the internet and they are apparently the culprit. I don't know how normal this is, if it's a remnant of someone having had a virus, if it's a remnant of some file sharing software (which I take off). I would appreciate any insight as to how to deal with this. Thanks, Tom Tag: export vpn profile Tag: 289802
  - 2
    - ping with dscp windows ignore ecn-ce field when I ping from machine A to B: >ping 121.1.1.1 -v 0x47 windows keeps delivering the ToS field as 0x46 in the IP datagram. This is what Wireshark reported. However, I didn't have any problem when pinging from a linux box. It appears that the 2nd Hex will always be round off to the lower even number when pinging from windows machine, e.g: 0x27 becomes 0x26 0x15 becomes 0x14 0xA3 becomes 0xA2 and so on.... When looking closely in Wireshark, this is this due to the last bit of the QoS because it's related to ECN-CE ....whatever, this means....does anyone know how can I turn on this function? So I can set the traffic all the way from 0 to 255 without any limitation? and secondly, starting with windows 2000 ....has microsoft updated the QoS filed to DSCP? Because when I look at ping /?, it still showing QoS filed as ToS and eveyrone knows that ToS is obsolete. Tag: export vpn profile Tag: 289801
  - 3
    - unable to access ftp site Iâ??m trying to access an ftp site that I know is good through an Internet connection that is also good. But after I correctly enter the username and password for the site, I get the message â??Internet Explorer cannot display the webpage.â?? Does anyone know what could be causing this problem? Tag: export vpn profile Tag: 289800
  - 4
    - CNN Virus Problem I had the CNN Virus Problem a few days ago and have finally cleared (I hope) the virus from my system. I now have a new problem. My lan contains the following components: wireless router, two computers, two printers, network backup drive Computer 1 had the virus. One of the print drivers was deleted somewhere along the way. Now, Computer 2 can ping all other parts of the network except Computer 1. Computer 1 can ping only itself, not even the router but it does have Internet access. IP address, mask and gateway are all the same as they used to be before the infection. No dup IPs on the network. Rebooting the standard million times has not changed anything. Setting a fixed IP address, rebooting no help. Back to DHCP, no help. The most eerie of all, the print driver for one of the printers, printing to a fixed IP address WILL print a test page but printing a normal document gets a disconnected error. I need some help in where to look and what to check. I'm out of things to check. TIA, GWB Tag: export vpn profile Tag: 289797
  - 5
    - Ad hoc network connection problems, XP to Vista I'm trying to set up an ad hoc network between an IBM T43 running Win XP Pro SP3 and a newer Dell laptop using Vista SP1. I can define the ad hoc network on the XP and get the Vista machine to "connect" to this network. But the T43 will not connect. I have selected "Use Windows to configure settings" in the Wireless Network Connection Properties window, but IBM Access keeps jumping back in and takes over. I think I might get farther if I could work only in Windows without this third party program making my waters muddy. Funny that even tho I used the ThinkPad to create the network it is the machine that is having connection difficulties. Any thoughts on how to get this set up? What differences between XP & Vista in this matter do I need to address? I'm sure some things have changed. Tag: export vpn profile Tag: 289795
  - 6
    - Two questions Will disabling "Automatically Search for Network folders and Printers" in XP in the Folder options speed up the login process? Also I read that HKey_LocalMachine\Software\Microsoft\Windows\CurrentVersion\Explorer\RemoteComputer\NameSpace and deleting the second string will speed up network browsing. Has anyone used this and found improvement in their browsing? Tag: export vpn profile Tag: 289793
  - 7
    - Looking to share my Laptop Wireless over Laptop LAN port Dear All, I have a machine upstairs right next to my laptop that is wirelessly connected to my router, I've tried to use a cross over cable between the two machines, but everytime I 'Enable' the LAN (even when the wireless has the correct IP and is enabled) I can't access the internet on my laptop. Disable the LAN and the internet comes back.... I must be doing something wrong... my Ip Range is 192.168.1.x, Default Gateway being 192.168.1.2. I've read various posts, some mentioning using 10.0.0.1 etc, but I was confused, as I have never had to use this before, as far as I was aware any device on the network has to be within the same ip ranges, I'm sure I've read somewhere that the subnet can make alterations to the numbers you can go up to, but as I've never needed more that 255 machines, I've always stayed with 255.255.255.0 (clasping at straws there) Is there anyway I can set up the laptop, so the wireless on the laptop still calls my router for internet, but shares the connection it receives over the lan port (cross over cable) and the 'other machine' can access the internet? There is 'NO' option what so ever for the 'other' machine to have a wireless nic put into it, or a usb version,etc it only has a lan port. Hope someone can help me with this predicament... Regards Paul. Tag: export vpn profile Tag: 289785
  - 8
    - VISTA with VIA Rhine II Fast Ethernet Adapter I'm useing a industrial PC with VIA EDEN 1.2Ghz, 1 GB RAM, 40GB HDD, and a VIA Rhine II Fast Ethernet Adapter, with Vista Business SP1. When the PC first boots, it connects to the network with a problem, untill I try to access the network, or do any type of windows updates? it then drops the connection - not completely i still have the monitors in the sys tray but no globe? it says i have local connection only, but i cant access or network? if I re-boot then everything works again for a short period of time. I've tryied different updates for the NIC and I've tryed 2 different hubs, a direct line to the internet and different RJ45 network cables? I've anyone has any ideas that may help that would be great! Thanks. Tag: export vpn profile Tag: 289781
  - 9
    - XP dhcp service stuck starting I have a laptop that is stuck with the dhcp client service "starting". I cannot stop, or start dhcp. All network adapters (wired, wireless, and VMware adapters) are stuck acquiring ip address. Assigning static ip address works. In the event logs I found the following error: Event ID : 1004 The DHCP Client Service is shutting down. The following error occurred: The system cannot find the file specified. Tag: export vpn profile Tag: 289779
  - 10
    - DCOM errors on Windows XP Pro clients in SBS2003 network Does anyone have a troubleshooting guide on DCOM errors of the "class not registered" and "not found" types? These are occuring on only a couple of PCs on a network of about 60 PCs. Thank you, for any advice on how to solve this problem. Tag: export vpn profile Tag: 289777
  - 11
    - wireless why does bluetooth devices option not show up in my control panel option when i am trying to add a bluetooth phone to my windows xp home edition please? i can connect with usb cable but when reading installing a bluetooth mobile on trouble shooter clicking on bluetooth devices nothing happens! many thanks, -- jim Tag: export vpn profile Tag: 289775
  - 12
    - computers hi im new to this group how r u? Tag: export vpn profile Tag: 289768
  - 13
    - DNS issue on public library free wi-fi? We understand that sometimes there may be temporary DNS-related connectivity losses on public library (or other) free wi-fi. However, even using other DNS servers like OpenDNS or ScrubIt! sometimes does not resolve temporary loss of connectivity with IE 7 or Firefox 3. But uTorrent continues merrily without missing a bit (!). OE6, configured for news only with 3 different news-servers, works for the AIOE server but cannot find the Microsoft (this) and the Mozilla servers. Pretty weird - is there something else besides DNS gumming up the works from time to time? And is there a way to deal with it? Regards and TIA. JP -- Tag: export vpn profile Tag: 289756
  - 14
    - Apache Web Server I am unable to install Apache Web Server on Windows XP Home edition. Tag: export vpn profile Tag: 289755
  - 15
    - ZA Problem Howdy. I have a desktop and laptop and Linksys. Until a recent ZA update, I was able to network to some files back and forth between my desktop and laptop. All of a sudden I can't do it. When I disable ZA from my laptop all works fine. How do I reset ZA to allow me to do this again? Mel Tag: export vpn profile Tag: 289750
  - 16
    - View workgroup computers In Network Tasks, When clicking 'View workgroup computers' I get the following message: * 'WORKGROUP" is not accessable. you might not have permission to use this network resource. contact the administrator of the server to find out if you have access permissions. The list of servers for this workgroup is not currently available * It worked prior to the XP SP3 and installing MS Office Accounting that includes a SQL Server. Any help would be greatly appreciated. -- -JoBo Tag: export vpn profile Tag: 289747
  - 17
    - Net Use Hi, I have been using the net use command previously with no trouble about 2 months (Windows XP Pro), but yesterday I have not been able to access any of the drives that need a specific password: net use y: "\\server\allfiles" net use z: "\\server\securefiles" * /user:securityuser the all files (y drive) is accessible but not the z drive which needs the securityuser password. Any idea what might cause this? Is there a way to forcibly remove all net shares for the users drive before connecting with the above bat file? Thanks! Tag: export vpn profile Tag: 289746
  - 18
    - Transporting a NEtowrk Connection Is it possible to transport a Network Connection, specifically a Network Connection that connects via VPN to our Company Server, using a flash drive or CD? This way a user can access Network Drives over VPN from a public computer without actually creating a Network Connection. Same question, except can a network connection be transported to a MAC? Or is there a simple Network Connection Wizard on MAC OS to configure a VPN connection to a Windows 2003 Server. Tag: export vpn profile Tag: 289738
  - 19
    - Netbios username query Hi, I have a system which queries the netbios username of a remote PC. Unfortunately, during testing of a new XP build, the username is no longer being displayed with a 'nbtstat -n'. The Windows firewall is disabled. The 'Messenger' service has been restarted. Netbios over TCP is enabled. The PC belongs to a workgroup (user authentication is against eDirectory). This has me completely stumped! Tag: export vpn profile Tag: 289733
  - 20
    - slow network bootup Windows XP Hello, I am IT spacialist in my company, and I think I've tried almost everithing to resolve the isue, but the problem still exists: The system: Fujistsu-Siemens laptop- good hardware resurses,Intel chipset,Core processor 1,6GHz,512MB, Windows XP SP3. The problem: When starting Windows slows sooooo much on loading desktop, and I found it is slows just on(before) loading network ( network connection monitors next to the clock). I've tried antivirus, temp. files cleanup,SP3, drivers, updates, autoruns, bootvis ...etc. Any ideas? Tag: export vpn profile Tag: 289732
  - 21
    - Prevent user to change his Windows XP desktop IP address Hi, How to prevent the user to change the IP address that was assigned to his workstation Windows XP ? If it is via Windows AD GPO, could you tell me how to do please ? Regards. -- Serge Tag: export vpn profile Tag: 289731
  - 22
    - History changes for Windows XP IP address Hi all, I would like to know how to monitor history changes for a Windows XP desktop IP address. Thx for your inputs. -- Serge Tag: export vpn profile Tag: 289730
  - 23
    - VPN connects but cannot ping VPN Server I have setup a VPN between a Win XP Pro PC at the office and another Win XP Pro at home. Both are behind nat routers. The VPN works and authenticates OK, but I cannot explore/browse the shared files on the servers. I've tried to open files by \\Servername\ShareName and also by IpAddress/ShareName. But then realized I can't even ping the server addresss 192.254.1.97 Can someone guide me as to what's wrong. Double-clicking the vpn connection icon gives these details: Type: PPP Transport: TCP/IP,IPX Server: 192.254.1.97 Client: 192.254.1.999 Running IpConfig /all, gives these details: C:\Program Files\Support Tools>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Tstclient Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Broadcast IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : Yes DNS Suffix Search List. . . . . . : config Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : config Description . . . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network Connection Physical Address. . . . . . . . . : 00-16-6F-zz-xx-yy Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.65 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.254 DHCP Server . . . . . . . . . . . : 192.168.1.254 DNS Servers . . . . . . . . . . . : 192.168.1.254 Lease Obtained. . . . . . . . . . : 01 August 2008 10:22:49 Lease Expires . . . . . . . . . . : 02 August 2008 10:22:49 PPP adapter Wel via VPN: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface Physical Address. . . . . . . . . : 00-53-45-00-xx-yy Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.254.1.99 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.1.254 -- Thanks ... Barry Tag: export vpn profile Tag: 289729
  - 24
    - I've lost my home network I tried to read through the previous posts, but it appears that there could be any number of issues. Here's my story... I have a home network with 2 wired desktops and a wireless laptop - all running WinXP - plus a wired desktop running Vista Home Premium. All was fine. Then, my Linksys WRT54G router, so I purchased a Linksys N wireless router. Now, I'm in a mess. My Vista desktop occasionally recognizes one of the wired XP machines. And that XP machine occasionally sees the Vista machine. But it's inconsistent. And neither can ever actually see any folders on the other. (File sharing is on and some folders on each are shared.) The wireless laptop doesn't see any other machines - ever. I've tried all sorts of stuff - been through the MS KB and all the help files I can find. I can't even remember all I've tried or I would try to list them. I'm ready to start all over if anyone has any suggestions. Tag: export vpn profile Tag: 289722
  - 25
    - Mapped Network Drives in Internet Zone I've got an odd one for you all. I have about 100 XP SP2 workstations in a Multi-Site AD environment. I rolling out IE7 to our machines and I have noticed an strange behavior on the IE7 machines that I cannot seem to fix. I have the security zones setup in IE as the following (I've anonimized the names): Intranet Zone: [list] [*]*.parent.net [*]child.parent.net [*]*.child.parent.net [*]servername.child.parent.net [/list] Essentially I put all machines in the parent domain and the child domain in the Intranet Zone. Now the weirdness beings, when I type in the UNC "\\servername.child.parent.net\share" windows explorer tells me it is in the Intranet Zone, however when I map a drive to that same UNC path windows explorer tells me it's in the Internet Zone. I found a MS KB (http://support.microsoft.com/kb/303650) that states UNC paths with dots in them (IP Addresses & FQDNs) will always appear in the Internet Zone even though you have defined them in the Intranet Zone, but then why are my UNC paths displaying as in the Intranet Zone? I assume this is because I have enabled the "Intranet Sites: Include all network paths (UNCs)" in my IE Settings GPO. Has anyone run into this and figured out a way around it, or am I stuck? I would just reference all my network resources by their netbios name as the KB suggests, but we're in the multi-domain environment and accessing servers from the parent domain requires the FQDN. Thanks for the help! Tag: export vpn profile Tag: 289720
- Next
  - 1
    - net view Hi. 5 WinXP SP3 machines permanently are in a LAN. They all have fix IP addresses. When I say "net view", the results vary greatly. Sometimes it shows me only 1 computer, sometimes all 5. No scheme detectable. Why is that? Otherwise, the network works just fine. Thanks, -- Georges Heinesch Tag: export vpn profile Tag: 289716
  - 2
    - dhcp and static IP on single nic I was trying to setup dhcp and static ip on single nic so I have two ips as described in this site: http://www.petri.co.il/configure_tcp_ip_to_use_dhcp_and_a_static_ip_address_at_the_same_time.htm but the problem is that in the end it doesn't assign the static ip's. It uses the 0.0.0.0 if I leave it in there but thats it. Anyone? Thanks B Tag: export vpn profile Tag: 289712
  - 3
    - My network connection is no longer working Hi all... I was wondering if someone would be able to help me with a problem? I was on my school network without any problems at all until I installed an NVidia graphics card, the motherboard of the dell machine I use has an onboard graphics card which i have disabled so that I could use a seperate graphics card. The reason for this was so that I could have dual monitor display. But now for some unknown reason my network connection no longer works can anyone help? The operating system is windows xp professional, im completly stuck and i dont want to have to use an image disc as its not up-to-date. Your help would be greatly appreciated. -- Darren Jeffs Danetre School Tag: export vpn profile Tag: 289700
  - 4
    - windowsXP will not open my 2005 Quickbooks Pro Help--I cannot open my Quickbooks 2005. i get an error saying windows cannot open it. Tag: export vpn profile Tag: 289692
  - 5
    - WinXP Pro + Fax Console + Caller ID Hello, i been breaking my head over this. What type of modem does Windows XP Pro. Fax Services require in order for Fax Console to recognize and fill in the "Caller ID" field? 1. i have tried 3 different modems (generic, generic, robotics) 2. all three different modems recognize the caller id when using AT+VCID=1 string, via HyperTerminal 3. in modem Control Panel, the string AT+VCID=1 is typed in the Advanced tab "Extra initialization commands" but, yet Fax Console will not display the caller id. Any guidance or ideas are much greatly appriciated. Tag: export vpn profile Tag: 289682
  - 6
    - XP Pro Requests Password When Accessing Folders From Another PC Hello, I hope someone can help me! I have an XP Pro Desktop wired to a linksys router. I have a laptop that I recently installed Windows Vista to. My roommate also has a Desktop with XP pro wired through the router. Prior to upgrading my laptop to Vista, I used to copy files and folders from XP Pro Desktop. After I upgraded my laptop to Vista, I can see my XP Pro Desktop, but when I try to access it via Window Explorer I get a pop-up that requests a username and password. I can access the folders on my Vista laptop from both Desktops with XP Pro. I can access the folders on my roommates Desktop with XP pro from my desktop with XP pro and my Laptop with Vista. I cannot access the folders on my XP Pro desktop from either my roommates XP Pro Desktop or my Vista Laptop without getting the pop-up requesting a username and password. I only use Windows firewall on all three machines. No third party firewalls are installed, however, the XP Pro Desktop that I cannot access did have Zone Alarm installed which I recently removed. I have allowing file/printer checked in Windows Firewall. All Computers are in the same workgroup. If anyone has any suggestions, I would greatly appreciate your assistance! Regards, Scott Tag: export vpn profile Tag: 289681
  - 7
    - D-link DWL 650+ doesn't detect networks Hi Folks, I'm having problems with my D-link DWL-650+. I have this PCMCIA card installed in a Toshiba Satellite A10-SP129. The 650+ isn't detecting the 802.11b network in the area, which is WEP encrypted. I have another card, a Proxim Orinoco Gold 8420-WD, which detects and connects to the network just fine. I've installed the latest d-link driver. I've tried finding the network using windows, and using the d-link software. There is only one network in the area, but i doubt it would see the others if they existed. Any ideas? Am I dealing with a dead card here, or is there something i can do in xp sp2? thanks, allie Tag: export vpn profile Tag: 289680
  - 8
    - D-link DWL 650+ doesn't detect networks Hi Folks, I'm having problems with my D-link DWL-650+. I have this PCMCIA card installed in a Toshiba Satellite A10-SP129. The 650+ isn't detecting the 802.11b network in the area, which is WEP encrypted. I have another card, a Proxim Orinoco Gold 8420-WD, which detects and connects to the network just fine. I've installed the latest d-link driver. I've tried finding the network using windows, and using the d-link software. There is only one network in the area, but i doubt it would see the others if they existed. Any ideas? Am I dealing with a dead card here, or is there something i can do in xp sp2? thanks, allie Tag: export vpn profile Tag: 289679
  - 9
    - Problem : Visrus? sends e-mails automaticaly I paid attention that my outlook starts to send E-mails to verious people (which are not in my contacts list). They all have E-mail accounts with hotmail.com as well as I do. I have a symantech anti-virus but it does not show any problems after full scan. I also experienxce slow performace while surfing in the Internet. I have win XP SP2. How can I fix it? Tnx, Zvi B. Tag: export vpn profile Tag: 289677
  - 10
    - The DHCP Allocator Has Disabled Itself.... I've got a home user customer who is experiencing poor Internet performance at times on an XP Home SP2 machine that is connected via Ethernet to a Belkin wireless ADSL Modem/Router. There's no obvious problem as far as the ADSL installation or line stats but the System Event Log of the XP machine is full of many occurrences of the following event: Source: IPANTHLP Category: None Type: Error Event ID: 30013 "The DHCP allocator has disabled itself on IP address 192.168.2.2. since the IP address is outside the 192.168.0/255.255.0 scope from which addresses are being allocated to DHCP clients. To enable the DHCP allocator on the IP address please change the scope to include the IP address or change the Ip address to fall within the scope." The Belkin Router is assigning itself 192.168.2.1 and client addresses from 192.168.2.2. The IP address the XP machine is getting, 192.168.2.2, is within the reserved address range so I'm not sure why this error is being generated. Can anyone help? Tag: export vpn profile Tag: 289673
  - 11
    - Puzzling nework behavior I had a 2 Win XP Home computer, one printer LAN running through a broadband router with no problem. But the router died and had to be replaced. After reinstalling the printer drivers both computers can talk to the printer. But that's where the reliability ends. On boot, neither computer can access the other via LAN. I get a permissions error. If I drop both firewalls my backup computer then can see the main machine. Then if I put the firewalls back up (kerio 2.15, btw), machine B STILL can see machine A in real time! Now to machine A. Machine A sees the LAN, "Mynet", but cannot access it. I get the "no permissions" error msg. I've spent a lot of time tinkering around and am getting absolutely nowhere. I find this stuff very frustrating and what's more I suspect it doesn't have to be so. Anyway, any direction would be much appreciated. Thanks, p. Tag: export vpn profile Tag: 289670
  - 12
    - Help with connecting to wireless network I'm having trouble getting one of my computers to access the internet via my wireless network. My first computer connected and accesses the web no problem. I installed the wireless dongle on my second computer no problem and it says that it connects with a strong signal. The problem I have is that for a number of web sites I try to connect via a browser and it eventually "times out" and says that it can't connect. The same web sites connect no problem over the wireless on the other computer. When I ran the XP utility to analyze my connection it came back as saying that it couldn't connect over http, https, or ftp and called out ports 80 and two others (135 I think and another I can't recall) saying I may be blocked via firewall. The Windows firewall was on but I couldn't turn it off because it was set via group policy (it was off on the other computer). I disabled the Windows firewall by: From the Start menu, select Run, then enter gpedit.msc. Expand the Computer Configuration folder, then the Administrative Templates folder. Expand the Network folder, then the Network Connections folder, then the Windows Firewall folder. Select the Standard Profile folder. Double-click the Windows Firewall: Protect all network connections option. Select Disabled, then click OK. Select the Domain Profile folder. Double-click the Windows Firewall: Protect all network connections option. Select Disabled, then click OK. Close the Group Policy dialog box. I confirmed the firewall was disabled but I still have the same problem. It seems like something is blocking the loading of certain sites but I can't figure out why - I can load my geocities home page and msn.com but when I go to my ISP's home page to check mail via the web it doesn't work, same with many other pages like eBay. Can anyone help? Adam Tag: export vpn profile Tag: 289669
  - 13
    - Wireless network problem with XP and Vista I added a Vista laptop to my wireless network and now my XP laptop times-out when tying to connect to websites. It has a good IP address and worked fine until I added the Vista machine. Also, I'm able to ping the router but no other machines. My XP machine will connect to other wireless LANS that have never had a Vista machine connected to them. Even when I take the Vista machine off my network and reboot everything my XP laptop still doesn't connect. Help... Tag: export vpn profile Tag: 289667
  - 14
    - Help! Firefox and Google gives me a DNS "redirect loop" error !!! This is weird. "Redirct loop FireFox has detected that the server is redirecting the request for this address in a way that never completes" This happens for docs.google.com google.com works fine. While it is trying, messages in the lower left flash by telling me it is trying and waiting for a response from the server. IE7 works fine on the same machine. Other machines work fine on the same LAN and broadband connection. We have nothing but client PC on this side of the router. Any ideas, guys? TIA. -- Al Dykes News is something someone wants to suppress, everything else is advertising. - Lord Northcliffe, publisher of the Daily Mail Tag: export vpn profile Tag: 289658
  - 15
    - Windows XP Home Edition all versions netbios sessions bug Hi! I am a security researcher and a software developer and this bug has been disturbing me for years!!! I have a home network, no domain, all computers have same workgroup name: "WORKGROUP". All my computers are default installation Windows XP SP3 Professional English except one Windows Home Edition (its an OEM version coming with Sony VIAO laptop, also updated to XP SP3, but the service pack is not the cause of the problem) In all my computers, I enabled file sharing in the windows firewall and all the share settings are standard and enabled. No security software or any hooking possible driver is installed on any of my computers. The problem is i cannot connect to any netbios share/rpc service in the Home Edition computer. Now the weird part, the only way which i am able to connect to the home edition computer is if i am connecting from it to another computer on my network using ONLY THE ADMINISTRATOR account and no other account even accounts with full administrator privilleges. Once i connected to another computer using the administrator accountm then he can connect back to me. I know the administrator account comes with a blank password at all xp home edition or just in OEM versions and it may not work because of HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa limitblankpassworduse=dword:1 anyway in this case i changed the administrator password in my windows home. I know that windows xp home edition supports only simple file shating and that the design of simple file sharing is to share file access only using the GUEST account BUT this still doesn't explain why if the ADMINISTRATOR account CAN FULLY share files with a windows xp pro(with simoke file sharing turned off) but ONLY AFTER A "NET USE" WAS INITIATED FROM THE XP HOME EDITION MACHINE and ANY other attempt to connect to the xp home from remote using the administrator account is denied. Fix this bug, thank you. b.t.w Where is the "windows xp home edition bug report" area on microsoft website? -------------------------------------------------------------------------------- Aspect9 Founder & Senior Software Developer Tag: export vpn profile Tag: 289656
  - 16
    - XP PC wont DNS or DHCP Hi all, Have a PC here which won't pick up DHCP or DNS. Using DHCP gives me the 169.254... address. If I set a fixed IP add/gateway/DNS, I can ping anything I want by IP address only - still no DNS. NSlookup says "No response from server". I've tried using my router, but also known-working external DNS server. I've tried resetting TCP with netsh. - No joy. I've tried a different LAN card (in desparation). No Joy I've done a System Restore to a time when it WAS working. No Joy. I've tried drinking coffee and smoking cigarettes, and banging my head. No joy. This is a 2002 version XP Pro, and has no firewall installed. Any clues anyone? -- Paullie in the UK Tag: export vpn profile Tag: 289654
  - 17
    - Built in netword card shows up as removable on HP laptop HP supplies some of their current laptop models with a Broadcom network card built in that shows up as a removable device and can be accidentally "removed" by the user (Using the "Safely remove hardware" icon in the system tray). When this happens the network adapter is unavailable until the next reboot. How do I tell Windows that the card is not removable? -- Tag: export vpn profile Tag: 289651
  - 18
    - Remote Desktop -Windows XP So I used to be able to use Remote Desktop on my laptop to connect to my desktop with no issues whatsoever. However, a few weeks ago, I was suddenly unable to connect to my desktop. When I click on the Connect button, the buttons with gray out for a split second and then reenable and nothing happens...no error message, no connection, nothing. I can ping my desktop from my laptop just fine, I can connect to my laptop from my desktop fine, I just can't do it from my laptop to my desktop. Both computers are running XP Professional with Service Pack 3 with all the necessary updates. I made sure Remote Connections are allowed and that it exists in the Windows Firewall exceptions. Now, I don't THINK I made any changes before it stopped working...at least none that I know of, to any settings or my router settings...anyone have any ideas? Tag: export vpn profile Tag: 289648
  - 19
    - How I can Setup a password for my network I've made a small network between three computers that have windows XP and the network work fine for a long time now without any password but a new need to have some shared hard disks on the network must have password to let others to reach to how I can modify my network setting to put a password on some or all network resources ( hard - computer - etc.) Tag: export vpn profile Tag: 289644
  - 20
    - dropped packets messages I use Verizon Security Suite. I'm getting a pop up occassionally that says FIREWALL in the upper boarder, and it is reporting dropped packets. I do not know how to interpret this information. My DSL speed is decent, and except for not being able to use Newegg since earlier this year (it hangs up), I am aware of no connectivity issues thanks in advance Tag: export vpn profile Tag: 289641
  - 21
    - network folders and printer shares lost I have a home network with 13 PC's. Many different printers and folders are shared and working but one specific XP workstation has lost it's shares. I can connect to shares from this PC by using the UNC path to connect to other computers, but I cannot browse to them. This PC has 2 shared folders which were working perfectly as well as a printer shared and working up until a few days ago, but now no other PC's on the network can connect to or see these shares, even the printer. I have tried releasing and renewing the IP address from DHCP, renaming the PC, joining a new network then re-joining the actual network that is established. Help!! Tag: export vpn profile Tag: 289640
  - 22
    - Wireless Disabled Automatically Hi. I am using Acer Apsire 5562 running Windows XP service pack 3. I a having a problem with my wireless network. When I start up my laptop the wireless connection works fine for a few minutes. Later it jus disappeared. When I go to network connections, the icon for wireles network connection says it is disabled. I tried enabling it, but i doesn't work I am not sure if it is a hardware problem or a software problem. When checked the hardware, it says it is working normally, so I assume th software may be at fault Anyone out there have any solutions First, for why it is disabled automatically Second, why can't it be enabled again afterwards Thank Tag: export vpn profile Tag: 289629
  - 23
    - sending a file to an xp machine? Is it possible to send a file to an xp machine that is a standard install and is connected to the Internet all the time? thanks, charles..... Tag: export vpn profile Tag: 289623
  - 24
    - Earlier post - Network Setup Wizard (XP) did not work This message is intended primarily for Steve Winograd, but if anyone else has a suggestion..... Hi, Steve, On June 26th, I posted about a networking problem on my in-law's computers. Your last request, dated 6/27, asked for some specific information using the ping command. Since we do not live in the same area, and at the current cost of gas ( (-: ) I was not able to post that information until 7/16. I'll be back at their location on the 29th, so any help would be greatly appreciated. Thanks. Ken Tag: export vpn profile Tag: 289618
  - 25
    - ICS-shared Connection dies when second PC obtains an IP from DHCP Evening! I've been experiencing problems with ICS and my connection for quite some time, but up until now, I was suspecting a certain 3rd party application to be at fault. Due to various reasons, I had to reinstall the 2nd Windows XP machine that uses my shared connection, and yet the problem persists. Setup: My PC is running Windows XP with SP 2, sharing its DSL Connection with my local network. I will refer to this one as PC#1 for the rest of this posting. This local network is bridged together from 3 different NICs; one running over to the 2nd Windows machine, the other from-time-to-time to connect my Mac using cross-over cable, and one for a Virtual Machine running linux. DSL (shared using ICS, remote administration is disabled) | [shared for] | Network Bridge (has DHCP enabled due to ICS, 192.168.0.1) | + Real 100MBit NIC to PC#2 + Real 100MBit NIC with Crossover, occasionally used by Mac + Virtual 100MBit NIC to Virtual Machine PC#2 is also running Windows XP with SP 2, and just yet a clean installation with only Antivirus, Firefox and Winamp installed as of now. I've observed the following pattern so far: 1) PC#1 is up and running, DSL is connected, PC#2 is off. 2) PC#2 is switched on, and after boot it tries to obtain an IP using DHCP. 3) PC#1 gets disconnected, the DSL Modem flashes a few times due to reinitialization. 4) PC#1 reconnects again, DSL is up again, PC#2 can also access the internet. No further problems from here on. Looking at the Event Log, PC#1 shows RemoteAccess informational Event 20159, as if I disconnected clean and by hand (for 3). PC#2 shows Tcpip informational Event 4201 (the NIC was connected to the network successfully and has obtained an IP using DHCP) a few seconds before PC#1 loses the connection (for 2). Other than that, no warnings or errors are recorded. Using the virtual machine (running Debian Linux 3.1 Sarge) or my Mac (running MacOSX 10.5.1 Leopard), this does not happen; those systems obtain their IPs using DHCP, and work right away. I think this problem is related to the configuation of PC#2, but I can only take a guess for that. Does anyone know of this problem, or even knows how to resolve it? It's pretty annoying losing the current connection just because the 2nd PC was switched on, especially when a Software Update or similar is in progress. Thanks in advance. Greetings, BhaaL Tag: export vpn profile Tag: 289608

Hi,
How to export vpn profil with xp from one pc to another ?
i tried CMAK, but it doesn't work
thanks

--
Emmanuel

Re: export vpn profile by njem

njem
Fri Aug 08 09:46:10 PDT 2008

Not that much to them of course. You could go through the properties
and recreate. All but the password which of course should not be
available. They also get copied in a File & Settings Transfer.

On Aug 8, 8:12=A0am, "Manu" <i...@dring.fr> wrote:
> Hi,
> How to export vpn profil with xp from one pc to another ?
> i tried CMAK, but it doesn't work
> thanks
>
> --
> Emmanuel

Re: export vpn profile by Robert

Robert
Fri Aug 08 12:31:31 PDT 2008

This how to may help.
How to setup VPN
How to copy dial up connections from one computer to others How do I
set up a modem to dial into a remote compute How to configure W2K server as
VPN server ...
www.howtonetworking.com/Windows/vpnsetup.htm

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"Manu" <info@dring.fr> wrote in message
news:489c626e$0$900$ba4acef3@news.orange.fr...
> Hi,
> How to export vpn profil with xp from one pc to another ?
> i tried CMAK, but it doesn't work
> thanks
>
> --
> Emmanuel
>

Re: export vpn profile by Manu

Manu
Fri Aug 08 23:56:02 PDT 2008

thanks a lot, all what i needed is here

b r

--
Emmanuel

"Robert L. (MS-MVP)" <findemail@chicagotech.net> a écrit dans le message de
news: uuFfY0Y%23IHA.3852@TK2MSFTNGP05.phx.gbl...
> This how to may help.
> How to setup VPN
> How to copy dial up connections from one computer to others How do I
> set up a modem to dial into a remote compute How to configure W2K server
> as VPN server ...
> www.howtonetworking.com/Windows/vpnsetup.htm
>
>
> --
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on
> http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on
> http://www.HowToNetworking.com
> "Manu" <info@dring.fr> wrote in message
> news:489c626e$0$900$ba4acef3@news.orange.fr...
>> Hi,
>> How to export vpn profil with xp from one pc to another ?
>> i tried CMAK, but it doesn't work
>> thanks
>>
>> --
>> Emmanuel
>>
>