no aunthentication tab in LAN properties!!!!!!!

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - XP SP2 machine can't get dynamic address Hi. We're running Server 2003 with a DHCP server. The DHCP side seems to be working fine. We have various reserved address [all below .100] and 20 IPs [.181 to .200] reserved for those that don't have a reservation. When we took a PC [Win XP SP2] off static address and tried to renew, it could not pick up a reserved IP address [even though the right MAC was used]. Even after removing the reservation, it couldn't pick up one of the 20 un-reserved addresses. It's a "flat" network with 1 segment and 1 router. Other clients are fine. The "repair" feature in win XP didn't help. Ideas? Some type of IP flushing? Thanks Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288085
  - 2
    - Why couldn't some people see all computers in the domain? Hi, We runs windows 2003 server and XP pro for workstations. Some of the XP user can see all computers in the domain under Microsoft Windows Network, but some of them can't. Can someone help to point out the reason? Your help will be appreciated. Thanks in advance! Lisa Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288077
  - 3
    - unable to browse web after a few minutes via HTTP, other protocols OK I boot up my XPSP2 machine and all is well - I can browse as normal. After a few minutes, I start getting connection timeouts (IE and Firefox). A reboot fixes the problem for a few minutes Here is the weird part - I can't browse via HTTP, but I can hit HTTPS sites without a problem. Ping works, IMAP/SMTP work, etc. I can resolve the sites, but can't see them via the browser. Can't visit a website via IP address either. If it were a config problem (local proxy, for example) it should be all the time, and not after some few minutes after bootup. Thoughts? Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288074
  - 4
    - lost internet settings for windows xp home edtn can anybody help please? Ive just spent 6 frustrating hours trying to recover my pc system. Having downloaded a security program from my isp supplier my pc crashed and although I have recovered the pc it appears that whatever hit me has scrambled my internet connection settings and I can no longer connect. My win.ini file and system.ini files were lost but through your pages have managed to recover them. No matter what I do I cant seem to get to a place where I can reinstate my internet settings. I know I am connected because i am writing this on my laptop which uses the same modem so i believe that side is ok. Where do I look? where are they hiding? system restore doesnt help ca n anybody out there ?? thanks -- retiredandslowsorry Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288072
  - 5
    - Offline Files Sync Issue WinXP Hello, I am curious if anyone has encountered this issue. Like many companys we have laptop users where we map their "My Documents" folder back to a server share. The "My Documents" folder is then made available offline files. I have a user that will create a file offline. Then log their computer onto the network. The laptop tells them that they have a "new" file to sync over. It attempts to sync the file over and them gives an error back that "access" is denied. Then once you logoff the computer the new file is then sync'ed to the server successfully. I have set the same user up on a different laptop and the issue does not happen so I am confident that it is nothing with the server. I have set another user up on the same laptop that is having the issue and the same problem occurs. Please help. Jason Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288067
  - 6
    - Map network drive I am trying to map the network drive to my local pc, but while mapping the drive error shows "Contact the administrator of this server to find out if you have access permissions. The network is not present or not started" (Working on Domain) From server we have given all the access to the user / computer. Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288063
  - 7
    - Mapped file share unavailable within seconds I can map a file share on an XP Home PC on my LAN. I can then see all the subfolders and files on the share. But within a minute or less, that share then becomes unavailable. Now if I try to map the same share, there is a delay followed by an error "the network path \\system\share could not be found After a few hours (and no other action need be taken), the above is repeatable - Ican map the share again, but only for about a minute before it becomes unavailable. I get the same behavior when attempting to map the share from two different PCs, both running XP Home also. Reboots of both the clients and the server machines make no difference. I've never seen such odd behavior and would appreciate help to resolve. Thanks. Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288060
  - 8
    - .rra files?? Hello I have set up my main computer to run on a wired connection from a Zyxel wireless router and everything is fine. I have also successfully connected to my wireless router using my laptop. The Zyxel wireless router also came with a USB plug in wireless adapter device which I thought I would use for the computer in the next room. This computer is quite old but is USB capable. I put the Zyxel installation CD to install the wireless adapter device in the CD tray and it loaded and the drivers and utility box were already checked. I clicked continue but it put up the following error: C:\WINDOWS\system32\drivers/BRGSeed0.rra and the only way forward was to abort installation. I restarted, tried again and the same thing happened. I have never heard of .rra files. Could someone please try to explain what this error is and how do I solve it. Many thanks Andrew -- AW Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288054
  - 9
    - No data in "Network Connections" Strange but true... I cannot open the "Network Setup Wizard". I go to Control Panel and double-click the "Network Setup Wizard" icon and get no response at all. When I open "Network Connections", I get a warning that "The Network Connections Folder was unable to retrieve the list of network adapters on your machine. Make sure that the Network Connections service is enabled and running". I have a working Internet connection - a wireless setup with a Linksys router. I set it up on this machine (a desktop with Windows XP Home SP2) 3 years ago and it has worked well ever since. At the time that I went wireless with the desktop, I remember going through and changing several settings in order to ease my mind concerning security issues... I turned off the file sharing, etc., as I only had the one computer. I recently purchased a laptop and was trying to set up file sharing between it and the desktop through the router and it seems that I need access to either the "Network Setup Wizard" or at least be able to see the current network connection in order to change the settings and allow the desktop to communicate with the laptop. I had some components replaced on the desktop motherboard a couple years ago and the tech didn't return my recovery disc. He has since closed up shop and I have no idea how to contact him. I would be happy to provide more info if it would help. Any constructive thoughts would be appreciated :-) Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288052
  - 10
    - MS VPN won't connect. I have a user that has a laptop that can access the internet just fine. However I can't get an MS VPN to work from the laptop either wireless or ethernet. If I use another computer on the same network going through the same router the connections work just fine. So I know it is not the VPN Server. Also the windows firewall has been disabled on the laptop. Since the other computer is going through the same router I know that the router's firewall settings are not the issue. I got a log file and it appears to be a registry issue. However, I have never seen this error before so I was wondering if anyone else has and how they went about fixing it. The log file is below. It is from using netsh ras set tracing ipnathlp enable. Thanks, Susan Conger [1924] 13:16:03: NatpRasManOnNotify: received change notification from RasMan. [1924] 13:16:03: NatpConnectionNotifyCallbackRoutine [1924] 13:16:03: NatpProcessConnectionNotify [1976] 13:16:03: NatpRasManOnNotify: received change notification from RasMan. [1976] 13:16:03: NatpConnectionNotifyCallbackRoutine [1924] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Harbor Roseburg) returned error 668 [1924] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(MJ Kellner) returned error 668 [1924] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Royal) returned error 668 [1924] 13:16:03: NhMapGuidToAdapter [1924] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(CDI) returned error 668 [1924] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(City Wholsale) returned error 668 [1924] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(CFG) returned error 668 [1924] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Springfield Grocery) returned error 668 [1924] 13:16:03: NhMapGuidToAdapter [1924] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(BiRite) returned error 668 [1924] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Packers) returned error 668 [1924] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(KwikTrip) returned error 668 [1924] 13:16:03: NhMapGuidToAdapter [1924] 13:16:03: NhMapGuidToAdapter [1924] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Harbor Olympia) returned error 668 [1924] 13:16:03: NatLookupInterfaceByAdapterIndex [1976] 13:16:03: NatpProcessConnectionNotify [1976] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Harbor Roseburg) returned error 668 [1976] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(MJ Kellner) returned error 668 [1976] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Royal) returned error 668 [1976] 13:16:03: NhMapGuidToAdapter [1976] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(CDI) returned error 668 [1976] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(City Wholsale) returned error 668 [1976] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(CFG) returned error 668 [1976] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Springfield Grocery) returned error 668 [1976] 13:16:03: NhMapGuidToAdapter [1976] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(BiRite) returned error 668 [1976] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Packers) returned error 668 [1976] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(KwikTrip) returned error 668 [1976] 13:16:03: NhMapGuidToAdapter [1976] 13:16:03: NhMapGuidToAdapter [1976] 13:16:03: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Harbor Olympia) returned error 668 [1976] 13:16:03: NatLookupInterfaceByAdapterIndex [1976] 13:17:33: NatpRasManOnNotify: received change notification from RasMan. [1976] 13:17:33: NatpConnectionNotifyCallbackRoutine [1976] 13:17:33: NatpProcessConnectionNotify [1924] 13:17:33: NatpRasManOnNotify: received change notification from RasMan. [1924] 13:17:33: NatpConnectionNotifyCallbackRoutine [1976] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Harbor Roseburg) returned error 668 [1976] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(MJ Kellner) returned error 668 [1976] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Royal) returned error 668 [1976] 13:17:33: NhMapGuidToAdapter [1976] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(CDI) returned error 668 [1976] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(City Wholsale) returned error 668 [1976] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(CFG) returned error 668 [1976] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Springfield Grocery) returned error 668 [1976] 13:17:33: NhMapGuidToAdapter [1976] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(BiRite) returned error 668 [1976] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Packers) returned error 668 [1976] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(KwikTrip) returned error 668 [1976] 13:17:33: NhMapGuidToAdapter [1976] 13:17:33: NhMapGuidToAdapter [1976] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Harbor Olympia) returned error 668 [1976] 13:17:33: NatLookupInterfaceByAdapterIndex [1924] 13:17:33: NatpProcessConnectionNotify [1924] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Harbor Roseburg) returned error 668 [1924] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(MJ Kellner) returned error 668 [1924] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Royal) returned error 668 [1924] 13:17:33: NhMapGuidToAdapter [1924] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(CDI) returned error 668 [1924] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(City Wholsale) returned error 668 [1924] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(CFG) returned error 668 [1924] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Springfield Grocery) returned error 668 [1924] 13:17:33: NhMapGuidToAdapter [1924] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(BiRite) returned error 668 [1924] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Packers) returned error 668 [1924] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(KwikTrip) returned error 668 [1924] 13:17:33: NhMapGuidToAdapter [1924] 13:17:33: NhMapGuidToAdapter [1924] 13:17:33: NatpGetRasBindingInfo: RasGetEntryHrasconnW(Harbor Olympia) returned error 668 [1924] 13:17:33: NatLookupInterfaceByAdapterIndex Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288051
  - 11
    - Seeing different shared drives ? Does anyone have any suggestions on seeing different shared drives between 2 PC on the same network? For example, 2 PCs are connected to a large network, on one PC, I can see 10 shared drives, but on the other PC, I only see 5 different shared drives. Does anyone have any suggestions? Thanks in advance for any suggestions Eric Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288045
  - 12
    - Sharing my CD rom, but I cannot see it on Network Neighbour? Does anyone have any suggestions on why I cannot see my shared CD-rom drive on Network Neighbour? Thanks in advance for any suggestions Eric Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288044
  - 13
    - Printing from VB5 I have an old VB5 program I need to use which outputs directly to LPT1. My new computer does not have a parallel port, only USB. Is there a way to create a "new printer" with the LPT1 directed to the USB port? clif Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288041
  - 14
    - One laptop won't connect We have four computers connecting via our Netgear router. Two are connected via cable and two laptops via wireless. Now one of the will connect to the home network (in that I can access the shared files on the other pcs etc) but won?t connect to the internet. I?ve checked and triple checked the settings and they seem fine. I gave up and set up a new wireless network and the other laptop connected without any problems at all but again this one just won?t. I changed the IP to a static IP address with no success, I?ve turned off the firewall. Any ideas? Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288038
  - 15
    - Can I connect a wireless router to an existing 8 port switch? I have to do work in a doctor's office. He has DSL going to an 8 port Netgear switch. All switches are being used. He needs to share a printer with 3 computers. He doesn't mind wired or wireless but since all ports on the switch are being used, then we are leaning towards wireless but don't know how to do that since we don't have a wireless router, becuase it's wired. Someone please help. Thank you. Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288030
  - 16
    - question about wake on lan I can run the "wake on lan" from the dos command line as : wolcmd [mac address] [ipaddress] etc Is it possible to automate this in a batch file so I don't have to type it in each time? TIA Jim Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288028
  - 17
    - A public Wi-Fi enigma A strange thing sometimes happens when I use the free Wi-Fi at the local public library :- Internet Explorer and Firefox will often stop connecting and display the respective <web-page not found> error messages. Outlook Express also says <the server could not be found>. The issue resolves itself within a few minutes. Other users have this problem too, so there is nothing wrong with my laptop. However, during all such interruptions, uTorrent would keep working merrily as if nothing has happened. What is its secret? Is it related to Windows XP, or the wireless network set-up at the library? Or something else? This is a Windows XP Pro SP3 unit, BTW. Regards and thanks in anticipation for any insights. RR --- Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288024
  - 18
    - Home Networking setup problems I have three computers, one with xp pro, another has win 2000 and the third is a MacMini wireless. I connect these computers via an Apple Base Station Extreame. Here is my problem. I can see all three computers from the Windows 2000 machine but I can not see any other machine from the xp pro system. I get a message : "Workgroup is not accessable. You might not have permission to use this network resource. Contact the administrator for this server to find out if you have access permission ... ." Well, I am the user and also the Administrator. I have no idea what I am doing wrong. I have followed all the necessary steps to set up a workgroup for home network. Any suggestions will be appreciated. Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288023
  - 19
    - Wireless on a MacBook running XP I have a couple of Macs that run Windows XP. Everything runs fine with them except I cannot connect to my secured wireless network. The network is secured with WPA2 and MAC authentication. When I attempt to connect tthe the network I get a message that says the network cannot be reached or is out of range. If I create the network connection manually I am not able to connect at all. Is this a Windows XP issue or a Macintosh running XP issue? Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288022
  - 20
    - "Windows is increasing the size of Virtual Memory" - Why??? I'm occasionally getting messages in WinXP Pro that Windows is increasing the size of virtual memory... but my system has 2Gig of RAM, and every time I get this message I see that I have about 1.3Gig of RAM available (according to Sysinternals Process Explorer). Isn't WinXP supposed to use up my RAM before going to the swap file? Why get this message when so much RAM is available? Tony Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288019
  - 21
    - Which API to use to display "Select Users or Groups" dialogbox? Hi All. Could you please help me? I need to display standard dialogbox - "Select Users or Groups" to choose a user account (usually domain user account, but not always - local user accounts could be used too). So, user should choose a user account and click [OK] then my application saves name (or SID) of selected user account in remote database. Selected user account here is not related to any object in Windows (like file or anything also), it is just a user account to be enabled to login to a system (not Windows). In other words - want to make Windows users login to non-Windows system. Idea is - administrator selects a number of user accounts enabled to login to a system (non- Windows), these user accounts saved in database, then (when login) users submit own account name to a system, it makes select from db and see if this account enabled to login... Everithing is working ok, expect selecting user account, I want to display standard dialogbox but dunno how to do this... I dig out MSDN but unfortunately have not found any such API. :-( I'm trying to experimenting with EditSecurity function from AclUI.dll but seems it is quite complex and I'm not sure if it will really display the dialogbox I need? If you have any ideas on this, could you please share with me? Regards, Dmitry. Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288014
  - 22
    - Workgroup Setup I want to do the following; 1 workstation containing 2 NIC's, I realize that I have to setup 1 card with an static IP address, have this computer access the internet via 1 card and the other card access the workgroup. All workgroup computers shall access the internet via the computer that has the 2 cards. My question is do I need a firewall on all workgroup computers or just the one that access the internet directly? I will have anti-virus on all PC's. TIA Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288005
  - 23
    - Can not figure out...... Have been using a dial up for many year. XP with 3com megahertz Lan + 56K Ethernet interface. Everything has been running fine. Until I recently installed a new driver for my Atheros wifi adapter. Since then I can not get my 3Com to work. Check the device manager which says everthing is fine and working. When I try to use system network page show connecting.... but it just times out. Have another disk I can put in and it works. Any ideas would be appreciated. Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288004
  - 24
    - Setting program for internet access At one time I had set up which type of internet access I wanted windows to use if a program called for internet access. At the time I only had a dial up access through AOL. I now have a DSL access and want to change that preference to use dial up only as a last resort. I do not remember where that preference was located and my computer still trys to call up AOL if a program I am using requires internet access. Any ideas on this as I would love to change this preference? Thanks Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288003
  - 25
    - what is this? i get it in my inbox every day ptums6btpnazXal3qfG02qFDv+ykvavHtlW02qFDpcG2oaSjsMqyo73oqeO2VbTaoUOzxqbTpKOl zrZnwuCq96FDpcG2oaQNCqOwyrKjveip47ZVtNqhQw0KssSkQKaopVy46r/EoUeir6K4orKity2i tKK3oq8torCir6K2DQq73a1uuOqq98HKtlKqq67GoUOnUbJ2p0Oq+cJlp0OhQ7FNv+yko7DKsqOz Xal3qfG02qFDqfG02qfWs3ShQ8Dnt366oQ0KpWKmfqFDDQqyxKRApqilXLjqv8ShR6KvoriisqK3 LaK0oreiry2isKKvorYNCqSjsMqyo6RHrUyhQ6/Kv/qn5KfaoUOkZ6ZhtlW02qFDsU2/7KS9pXGt 06RItlW02qFDtXW0wbZnwuChQw0K Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 288000
- Next
  - 1
    - cannot re-connect to internet The first time I connect after start-up there is NO PROBLEM. But if I dis-connect manually, then try to re-connect later, I get a message "all devices connected", and must re-start my system. After a re-start, I can connect ONCE ONLY, then the same problem occurs. I've been using a US Robitics USB modem for a couple of years and never had this problem until recently. Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287999
  - 2
    - DNS Client/Hosts File I've read disabling DNS Client & using a good Hosts file provides safer & faster web browsing. I'm using IE7. Just thought I would check with people that know what they're doing before I go messing around with something I'm not sure of. Any expert advice is appericated. Thanks, NJ Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287993
  - 3
    - internet problem When I try to connect to my dial-up connection, it dials like normal. However, when I go to Internet explorer, it says the page cannot be displayed. My email can't be accessed either. This is a computer that hasn't been hooked up to internet before this. Any help will be appreciated. P.S. I have tried other modems. -- Message posted via WindowsKB.com http://www.windowskb.com/Uwe/Forums.aspx/windows-xp-network/200805/1 Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287992
  - 4
    - cannot ping internet but http ok hi, after a virus removal, my system has ping problems. I can browse the web via firefox but not via IE. I can ping the intranet but not the internet. pinging the internet doesn't work with plain name nor with numbers. using nmap I can scan port on ip addresse on the internet (it tells me to use the -PN option as ping doesn't respond) I have disabled the xp firewall, the other computers on the same network are working fine. and this laptop has the same problem on other network too. the problem is really inside this laptop and not on the router. I did reboot several times in vain. any idea ? thanks in advance yomgui Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287985
  - 5
    - Win XP Win 2000 networking problem I'm setting up a home network, so far with only 2 machines connected. I can see the Win XP Pro machine from the Win 2000 machine, and see the drives and share files from the Win XP Pro, but from the XP Pro machine, I can't see any other computers on the network. They can ping each other, but that's all. I'm going crazy here... Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287979
  - 6
    - No access I have 4 computers all with XP Pro. Got a new computer installed XP network was working great, after that installed Office 07 and Adobe pro and the network was all gone no access around some of the computers. The new computer could not access any Who can help me with this never ending problem Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287977
  - 7
    - wireless connection with managed code can anyone suggest some links, examples, or resources for creating wireless connections using managed code. The connections will NOT be between XPembedded, but regular XP(pro and home). Thanks Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287975
  - 8
    - RPC data marshalling fails on Microsoft Windows XP/2003 x64 I have an issue with x64 Windows platforms failing to marshal RPC data - error 1766. At the same time x86 platforms work ok. Changing structure packing or memory allocation (MIDL or OSF) does not help. IDL interface: [ uuid(26bae633-b0b6-4485-9bd1-d29a309ecdff), version(1.0), endpoint("ncacn_ip_tcp:[1999]") ] interface iface { typedef struct struct_1 { unsigned long fields; } struct_1_t; typedef struct struct_2 { error_status_t status; [unique] struct_1_t *data; } struct_2_t; typedef struct struct_3 { unsigned long num; [unique,size_is(num)] struct_2_t *val; } struct_3_t; void Test( [in] handle_t bind_handle, [out] struct_3_t *res, [out] error_status_t *dce_status ); } The culprit is data member of struct_2_t - if it is the only member in the structure, or if it is removed, the data marshaling works fine. SERVER: #include <windows.h> #include <rpc.h> #include <time.h> #include <stdlib.h> #include "iface.h" void WINAPI Test( /* [in] */ handle_t bind_handle, /* [out] */ struct_3_t *res, /* [fault_status][comm_status][out] */ error_status_t *dce_status) { res->num = 1; res->val = malloc(sizeof(struct_2_t)); res->val[0].status = 0; res->val[0].data = NULL; } int main() { RPC_STATUS status; status = RpcServerUseProtseqEp("ncacn_ip_tcp", // Use TCP/IP RPC_C_PROTSEQ_MAX_REQS_DEFAULT, // Backlog queue length for TCP/IP. "1999", // TCP/IP port to use. NULL); // No security. if (status) exit(status); status = RpcServerRegisterIf(iface_v1_0_s_ifspec, // Interface to register. NULL, // Use the MIDL generated entry-point vector. NULL); // Use the MIDL generated entry-point vector. if (status) exit(status); status = RpcServerListen(1, // Recommended minimum number of threads. RPC_C_LISTEN_MAX_CALLS_DEFAULT, // Recommended FALSE); // Start listening now. if (status) exit(status); } void __RPC_FAR * __RPC_USER midl_user_allocate(size_t len) { return(malloc(len)); } void __RPC_USER midl_user_free(void __RPC_FAR * ptr) { free(ptr); } CLIENT: #include <windows.h> #include <rpc.h> #include <time.h> #include <stdlib.h> #include <stdio.h> #include "iface.h" int main() { RPC_STATUS status; handle_t hBinding = NULL; unsigned char* szStringBinding = NULL; error_status_t rc = 0; status = RpcStringBindingCompose(NULL, // UUID to bind to. "ncacn_ip_tcp", // Use TCP/IP "localhost", // TCP/IP network "1999", // TCP/IP port to use. NULL, // Protocol dependent network options to use. &szStringBinding); // String binding output. if (status) exit(status); status = RpcBindingFromStringBinding(szStringBinding, // The string binding to validate. &hBinding); // Put the result in the implicit binding if (status) exit(status); RpcTryExcept { struct_3_t res = {0}; Test(hBinding, &res, &rc); } RpcExcept(1) { printf("Exception: %x\n", RpcExceptionCode()); } RpcEndExcept printf("Result: %x\n", rc); status = RpcBindingFree(&hBinding); // Frees the binding handle. if (status) exit(status); } void __RPC_FAR * __RPC_USER midl_user_allocate(size_t len) { return(malloc(len)); } void __RPC_USER midl_user_free(void __RPC_FAR * ptr) { free(ptr); } I would appreciate any help on the issue. Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287974
  - 9
    - jessica Check out our new site! Sexy Hair is cool, hip and edgy with distinguished brand names including Big Sexy Hair, Short Sexy, Straight Sexy Hair, Healthy Sexy ... ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ http://www.freewebs.com/piratradi ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287973
  - 10
    - jessica Check out our new site! Sexy Hair is cool, hip and edgy with distinguished brand names including Big Sexy Hair, Short Sexy, Straight Sexy Hair, Healthy Sexy ... ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ http://www.freewebs.com/piratradi ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287972
  - 11
    - One WIN XP compuer can't connect with RDC Hi, Hope some one can advise {RDC = Remote desktop connection.} I have 3 computers (winxp-pro SP2 all up to date) on my network. I have selected Allow RDC on all of them. I have checked that they all have the same services running/ settings ( although they also have different software installed on each unit as well). They are all connected to the same router. All have simple file sharing set up and all have passwords required to log in to each account. All accounts are administrator level accounts AND I have added the administrator accounts to the remote users group anyway ( although I believe that is not needed..) Now Unit A can "see" B & C ( Gets an active RDC connection and all goes as expected) and B can access C; C can access B as above BUT neither B or C can access A via RDC The error message is - "can not connect to the remote computer" ( tried both name and LAN ip address) Nothing in the event log of A There is no problem accessing shard folders b/w any of the computers including B access A for example. This problem seems exclusive to RDC. I have tried :- disabling anti virus AND firewall and windows defender and spybot etc etc etc on A - then I even uninstalled the Antivirus! No difference Started A in Safe mode with networking - got a "you were disconnected from the remote computer" error - before I even saw a connection had been achieved. Progress I guess but what? I guess I may have missed something obvious - but what?? PLEASE this is kinda driving me nuts :-) Short of reinstalling WIN xp - and the massive amount of software associated..... where too? I Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287968
  - 12
    - LAN connection not being made on boot Running XP Pro SP1 on my desktop PC for 3 yrs or so, using a BT (UK) router as my gateway. Suddenly whenever I boot the PC it no longer sees the gateway and ping doesn't work - doesn't even see itself any more. I have found that the only workaround is to use the Network Setup Wizard to create a new connection, which shows up as a Bridged Connection. If I then delete that, the ordinary LAN connection works absolutely fine! (Until I shut down, in which case I have to go through the same procedure). Why isn't the normal LAN connection extablishing itself properly any more? BTW I have two laptops both of which are still talking to the router fine, so it doesn't seem to be an issue with the router (and anyway I have power-cycled that several times to no avail). Thanks for any advice! CW Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287958
  - 13
    - File & Print Sharing via Wireless Access Point Hi, A little background. I have 1 PC (XP PRo SP2) connected via ethernet to a Netgear DG834GT adls/ router. I also have 2 laptops (1 XP Pro SP2 and 1 Vista HP) connected wirelessly. I also have a canon printer attached via USB to the PC. This set up works fine, internet, file and print sharing...everything. Because of inconsistent signal strength I introduced a BT Home Hub (HH) as a wireless access point (not connected to the telephone). I now connect the two laptops to the HH and the HH links wirelessly to the Netgear. I have got internet access for both laptops but can find no way of getting file and print sharing to working between the laptops and the PC. The netgear settings are: IP 192.168.0.1 Subnet 255.255.255.0 DHCP server on IP range 192.168.0.2 - 192.168.0.253 Channel 11 Uses WEP encryption WDS mode enabled for wireless repeater mode bridging The HH settings are IP 192.168.254 Subnet 255.255.255.0 DHCP server is off IP range 192.168.0.2 - 192.168.0.253 Channel 11 WDS mode enabled Firewall off On the Netgear I can see the HH and laptops are "attached devices" The two laptops can see each other, but can't see the PC The PC can't see either of the laptops No settings on the laptops have been changed All computers are part of the same MSHOME workgroup The printer is set to be shared There are folders on all computers that are shared Whatever I try just doesn't fix the problem. I keep thinking it's either the HH is not passing the network requests through (but as the firewall is off everything should be going through fine), or there is something within the Netgear that is causing the problem, but as the laptops worked fine when connected to it, I can't think what it would be. I'm totally confused. This is driving me absolutely nuts, so before I go insane could anyone of you very kind people offer any suggestions or advice please. Many thanks Malc Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287955
  - 14
    - how to make all print out go to server? Hithere, I have few computers; they all have XP professional installed, one of them acting as a server; how can I make all the print out go to the server directly so that I can control them from there. I need to save unessacery print out. At the moment all the workstation print out directly to the printer. What book do you recommand to buy in order to have a solid understaning of neworking, i mean server book may be???? Regards Alex Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287953
  - 15
    - Upnp - internet connection icon in system tray I am using Windows XP Pro SP2. I have recently lost the Internet Connection Icon from the System Tray, however the Cable connection is work fine; how can I get the icon to display again. Can anyone help? Nevio Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287948
  - 16
    - sending & receiving of data through network im having network connection with a server and 12 client computers one of my computer is showing the connection is connected with 100mbps but in the status its only receiving the data not sending at all, sending data is 0 always. when i connect other wire its ok. i checked with crimping also i tried almost 10 rj45 connector but the problem is same but whn i used it with different existing wire it shows me ok.. sending & receiving data are perfectly alright please help me in this.. thnx. Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287947
  - 17
    - DHCP Client Have Windows XP SP2 with all the avaliable updates (critical and optional) installed. My laptop connected to a Windows SBS 2003 network with DHCP server at work and gets the IP address of 192.168.0.56 I take it home and plug it into home network, which also uses DHCP, and I get a new IP address 192.168.0.102. However, when I bring it back (shutdown and start) to the office and connect it to the network, I logon to my laptop and it takes forever to load my personal settings (10 minutes) and I do not have a roaming profile setup. Not only that, I cannot access the network or internet. as it turns out, the IP address from my home network is not being released and I am not able get get an ip address from my server at work. Once I performed ipconfig /release then ipconfig /renew, then I am able to get the new IP and can access my network. I had this laptop setup as computer name ABC at one point. Then I formatted it and reinstalled everything and called it XYZ. Don't think this has anything to do with it. What is causing this problem and what is the solutions? Thanks for your help, steve Louie Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287946
  - 18
    - Printer shares require username and password? I am having a problem with a simple XP pro (SP2)system (server) when I set the printer to share over the network on the client machine I can see the server but the printer share does not show up! when I try to add a network printer. If i type in the path to the printer ie:\\server\lexmarkE the client computer replies with a logon asking the username and password. There is no logon username or password on the server or the client?? Baffeled !!! any ideas?? Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287945
  - 19
    - net use /persistent does not work anymore Hi, I used a mapping of the lpt2: port from a workgroup member computer with XP Home to a share of a domain member computer with XP Professional for a long time and it worked without problems. Now I had to replace this XP Professional computer by a Vista Professional computer. I used the same net use command and, as long as I don't restart the XP Home computer, the mapping works and I can print. This shows that there is no general problem with the Vista computer. The problem comes when I restart the XP Home computer. After restart a net use command on the XP Home computer shows me the mapped port, but with a "not available" in front of the line. Note that the "not available" is translated by me from the german version (the string there is exactly "Nicht verfgb") and may not match the string of the english version exactly. In order to narrow the problem I mapped a drive share on the Vista computer with net use * \\VistaComputer\share /savecred /persistent:yes on the XP Home computer and a second drive share on a NT computer with the same command. Note that I have to include credentials because the XP Home computer is not a member of the domain of the other two computers (XP Home computers cannot become domain members). Both shares are available after the net use command finished. After a restart net use shows me both shares but again with "Nicht verfgb" ("not available"). Although the first impression was that the Vista computer may be a problem the second test shows that something must have changed on the XP Home computer at the same time as I replaced the old XP Professional computer by the Vista Professional computer. It seems that the XP Home computer cannot either store the credentials or login to the domain during startup anymore. It would help me if somebody can explain where a persistent connection is stored in XP Home and how I can log the connection attempt. Now I made a recovery so that I have a really clean XP Home system now. Device manager is OK, no warnings or errors, system event log is OK, no warnings or errors, sfc /scannow completes without prompts for the setup CD. But a logged startup shows not loaded drivers. For that problem I opened a second thread, it is perhaps related to this problem (http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windowsxp.configuration_manage&p=1&tid=86e02800-46eb-408c-bc02-efc1720a47ba&mid=86e02800-46eb-408c-bc02-efc1720a47ba). Help is very welcome. Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287943
  - 20
    - "Log On" required? My wife's new computer is visible in the "View Workgroup PC's" (but not My Network) but when I click it I get a "Log-On" window. That PC is not password protected, it just comes on when you start. It has no firewall, (XP SP1) I tried leaving it blank, no luck. When I right-click>Properties a "BONK" ..."You do not have access to this sever, contact network admin..." I am the "Admin" how do I get past this? Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287940
  - 21
    - Can't Map a drive after VPN'd in Hello Guru's I am having a problem using the CMAK tool and mapping network drives. I want a one click fits all for my VPN users. A file I can send them without having to walk them through an install and setting up tedious stuff like map network drives. I want the CMAK to do it for them. I am having a problem setting this up. I have hit some problems having the mapped network drive function and some general network connectivity. Ideally what I ultimately want to have happen is the CMAk tool auto map a network drive right after the connection is established. With some users I may also want a routing table update. So what I currently have is the CMAK tool logging in successfully then I have a script set to run on "Post-Connection". Here is the script, a simple batch file. net use m: "\\172.16.0.100\Company Files" Now when the script runs it says the network path is invalid. Even though you can browse to it with the same path. Also I originally wanted people to connect to the shares via the Ethernet interface 172.16.0.2. It won't let me do that and says that the path is not found, even though you can ping it after the VPN has been established. It only lets you open a network share via the PPP interface, 172.16.0.100. Seems dumb to me. Any how back to the point, when the script runs Post Connection it says network path not found. If you wait however like 15 seconds and manually run the command it works. My question is, why won't it work right after the VPN is established like CMAK is suppose to do? Also Why cant I map a network drive to 172.16.0.2, why only the PPP interface? Something so simple seems to becoming unnecessarily complicated. Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287935
  - 22
    - Computer on Network Can't See Itself I have two computers on my Windows XP Home network. One is a desktop computer, which is connected by Ethernet cable to my DSL modem/router. The other computer is a laptop computer, which has a wireless adapter. For several years, I have been able to share files between the two computers. Now, however, when I go to My Network Places / Microsoft Windows Networks and select my network name, I cannot see the laptop computer from either the desktop computer or the laptop computer itself. However, from both computers, I can see the desktop computer in the network, and I can share the desktop computer's files. Internet access from the laptop computer is fine, and both computers respond to pings from the other. My wireless router sees the name of my laptop computer. I tried turning the Windows XP firewall off on both computers, but the problem persists. I am not running any other firewall software. I have run the Network Setup Wizard several times on each computer, and file sharing is still enabled for my folders on the laptop computer. Does anyone have an idea which step I can try next to fix this problem? Thank you. Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287934
  - 23
    - File and settings transfer Are the files and settings deleted off my old computer or are they just copied Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287929
  - 24
    - Download crashes I run XP SP2, wireless connecction via Belkin adapter/extender to Belkin router. After having problems with the connection, it seems to be sorted after repairing Windows and re-installing Belkin software. I also run Norton Systemworks Now downloads, incl Norton and MS updates, start off fine and then crash after quickly decreasing download times. I have tried to repair XP, Belkin re-install , and new network connections. I have tried the Firewall/Anti-virus on/off. I have put in the IP address manually as well as auto. I have tried Dial-a-Fix, System Mechanic, and a Winsock repair. Emails seem to download ok but webpages and updates slow the system to a crash. I did manage up update Ad-Aware, which found 3 minor bits, but nothing serious. The same with Defender tho I was unable to update its definitions. Oddly, I found that Ad-Aware, Defender and even Wireless Services disabled themselves, tho I could put them back to Auto. What do I have left to do other that an XP clean re-install? I have wasted so much time. Thx Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287928
  - 25
    - mapped drive problems i have written the following into a shortcut for the program to open from the mapped drive in shortcut properties c:\premier9\myobp.exe m:\Clearwtr.myo where c:\ is the workstation's hard drive, and m:\Clearwtr.myo is the name of the data file and the letter name of the mapped drive. Start in: c:\Premier9 I also placed a script in users start folder: net use M: \\computername \data /y But when i open the programs shortcut it does not open the mapped drive and I need to search for it. And the logon script does not create the mapped drive. I am needing to add this in explorer myself. the mapped drive opens otherwise on the users PC without any problem. Tag: no aunthentication tab in LAN properties!!!!!!! Tag: 287925

guys i need help!just after i installed sp3 authentication tab in lan
properties was gone!i cannot access network or internet!what to do!i have all
latest drivers and updates from microsoft update and all needed services are
started!what is the problem?how to enable/access authentication tab?thanks in
advance

Top