WPA-PSK client slow to connect

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Strange problem, I really need help I've been fighting this problem for two weeks, searching for help online, from newsgroups, reading manuals, etc with no luck. So please, if you have any idea what to do, share them. I installed USB based (3G) modem, which lead to the problem. Here are symptoms: - After installing the modem first some socket connections couldn't be established, then it became denser, now only about 1/20 succeeds - It seems random when socket connection succeeds, the variance is from every second to try every 33rd try. - The problem occurs with all means of connection (Ethernet, WLAN, modem) - The problem occurs with all TCP types of connection (Telnet, SSH, HTTP, etc), BUT ICMP works alright all the time - The problem occurs in all networks I've tried -> It looks like TCP packets are sent out because on connection tries the amount of transfered data increases, but received amount stays the same, meaning either that the target never receives the packet or its return packet never reaches my computer - Establishing network connection doesn't give any specific error, e.g. telnet just says 'connection could not be established' - If I use localhost listening socket (e.g. ssh tunnel to http-proxy), the connection doesn't even reach that meaning that not even localhost connections are working, BUT if an external computer tries to use my tunnel to proxy, it works fine, no problem at all - Web browser doesn't return any errors, clicking a link just doesn't do anything (besides on that 20th try or so), which leads me to believe that packets don't even reach gateway. Although routing table looks alright, e.g. with Modem connection the primary gateway points to localhost - Windows firewall is off and I don't have any other firewalls - In Safe-Mode everything works alright, starting XP in 'last good known configuration' doesn't help - Uninstalling the modem doesn't help Thanks in advance any advices you can give. Complete solution is necessary, but even a hint where the problem might lay would be welcomed. Tag: WPA-PSK client slow to connect Tag: 287730
  - 2
    - one way network problem I have a network with a mix of xp pro and home computers all with service pack 2. One computer which is xp home, can access the shares on other computers but no other computer can access its shares. This computer is running avg free and avg antispyware free version. I have enabled the guest account and created a few shares giving full access, is there something else I should be doing ? -- Message posted via http://www.windowskb.com Tag: WPA-PSK client slow to connect Tag: 287725
  - 3
    - Can't connect to internet Hi folks, I am helping a friend with his PC and I connected a Cat 5 cable from my router to his PC. His computer tells me that there is a problem connecting to the internet and it will not connect. This is a Win98SE PC but I have connected this way many times in the past although with an older Netgear Router. The Router I currently use is a Belkin Wireless N router. I can connect other PC's this way (using the cable to one of the router ports) with no problems. This PC, however, will not connect, FireFox times out as does any other access event. I read another post in here and changed from Automatically obtain an address to the IP address and subnet for TCP/IP for a device in my range (eg 192.168.2.4) I also entered the default gateway address manually to my router address. It still does not connect. Is there something in the computer or the router setup causing this? I've disabled the firewall on the PC to no avail. I also used ipconfig /all and it reports the proper IP address and gateway address. I also tried ping using the router address and it reported times??? info It appears to be working but no internet - can someone help? Thanks, Fred Tag: WPA-PSK client slow to connect Tag: 287724
  - 4
    - Mapped Network Drives Problem I have three machines all running XPSP2. The main machine is called Figaro the other two are quality and jfk. I have mapped some of the drives on Figaro to the other two machines and for some reason those mapped drives are no longer accessible. In Explorer they show up as disconnected network drives and when I click on one I get the error message, "An error occured while reconnecting P: to \\FIGARO\C$ Microsoft Windows Network : The network name cannot be found. This connection has not been restored. I disconnected the mapped C Drive from Figaro and I cannot remap it. I get the error message "The network path \\figaro\c$ cannot be found." It doesn't matter if the firewalls (Kaspersky Internet Suite) are on or off. What is truly weird is that I can connect to Figaro from quality using remote desktop. I can ping Figaro from quality and vice versa. If I open "My Network Places" on quality and go to entire Network > Microsoft Windows Network > Workgroup (The name of my workgroup) > it lists all three machines. When I click on Figaro I can see all the printer, Shared Docs, printer and faxes and Scheduled tasks folders. Doing all of the above on the third box, jfk, yields the same results. From figaro Win Explorer I have access to the drives I mapped from jfk and all the drives on Quality show up (when running Remote Desktop from quality to Figaro) as Disk From Remote Desktop Connection and I can access them. ipconfig /all from figaro shows: Windows IP Configuration Host Name . . . . . . . . . . . . : figaro Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : domain.actdsltmp Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : domain.actdsltmp Description . . . . . . . . . . . : 3Com 3C920 Integrated Fast Ethernet Controller (3C905C-TX Compatible) Physical Address. . . . . . . . . : 00-B0-D0-17-E5-C0 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.0.17 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 64.58.4.2 Lease Obtained. . . . . . . . . . : Sunday, 20 April, 2008 12:14:39 PM Lease Expires . . . . . . . . . . : Monday, 21 April, 2008 12:14:39 PM TCP/IP settings: DHCP is enabled No default gateway Automatic metrics No DNS servers specified Append primary and connection specific DNS suffixes ON Append parent suffixes of the primary DNS suffix checked Register this connection's addresses in DNS registration WINS - no addresses specified Enable LMHOSTS lookup checked netBIOS set to default Options - TCP/IP filtering is listed but not enabled. If I disconnect Remote Desktop (quality to Figaro) and try and map a network drive from quality on to Figaro \\quality\c$ I get the error message "the network path \\quality\c$ could not be found". If I go into Figaro's My Network Places > Entire Network > Microsoft Windows Network > workgroup . all the computers are there. I have flushed the DSN cache and run repair on "locl Area Connection" to no avail. Anyone have any suggestions?? Thanks Tag: WPA-PSK client slow to connect Tag: 287717
  - 5
    - xp/vista printing i have the following scenario i have a xp pro machine with the printer shared \\admin1\bensprinter and the c:\ shared \\admin1\cdrive i can see both shares from the vsta pc but get the error windows can not connect to the printer access denied i can access the cdrive share with no problem at all Tag: WPA-PSK client slow to connect Tag: 287706
  - 6
    - Networking Hell I need help to sort out a computer network. Are there any dedicated newsgroups for contacts in PC Networks? I need someone to come into my office. Where I live the specialist skills are hard to find. I have now a small network of 5 computers and I get endless headaches with stuff not working and the last "specialist" had never even heard of .NET. Then he started saying a Web developer could configfure the server systems. What I need is a simple and reliable system. The technicians seem to more interested in implementing some new whizz feature from Microsoft which ends up stopping my whole business. Tag: WPA-PSK client slow to connect Tag: 287704
  - 7
    - Cannot set up VPN connection on WinXp Home box Hi -- When setting up a new network connection on a WinXP Home machine, what would cause the "Virtual Private Network" option under "Connect to a network at my workplace" to be dimmed and unavailable? The computer _does_ have an Internet connection. Thanks, CL Tag: WPA-PSK client slow to connect Tag: 287703
  - 8
    - Ethernet: Little or No Connectivity at my wits end! I'm using Service Pack 2. My ethernet connection has the "Little or no connectivity message". It doesn't matter whether it's plugged into another computer with internet sharing, plugged into a router or directly to the cable modem - I can't get an IP address and the connection won't repair. I've done all of the following... - Turned off any third party services. - Scanned for viruses and adware. - Ran Winsock XP Fix - Replaced the old ethernet card with a new one. - Reinstalled Windows XP with SP2 from the disc. - Replaced the ethernet cable. - Disabled Windows Firewall.. The last thing that I did before this started happening was install AOL 9.1 and Avast! Antivirus, but I can't be completely sure. I uninstalled both and that didn't help. When I log in as Administrator in Safe Mode with Networking, everything works fine, so somewhere there must be a glimmer of hope. This is a friends computer with lots of programs, so I don't have the option of formatting the drive and starting over. HELP! Tag: WPA-PSK client slow to connect Tag: 287702
  - 9
    - DBusted.INFO | Unblock MySpace | Unblock Youtube | Works very fast! DBusted.INFO is new proxy and only proxy with which you can't get busted. Its very fast and you can easily use it in school, work and very simple you can unblock MYSPACE & YouTube and many other sites http://dbusted.info Tag: WPA-PSK client slow to connect Tag: 287701
  - 10
    - Domian server determination I know there is a command to determine what domain server your logged into from a Windows XP client? can someone please remind me Thanks for your help Tag: WPA-PSK client slow to connect Tag: 287698
  - 11
    - Remote connection pre release?? I have Win XP professional and have been using remote desktop connection over my wireless network to save me keep having to go to the othe rpc all of a sudden i get a message saying The Pre-release version of remote desktop connection has expired. To download full version go to windows update or see system admin. I have a full version of XP i tried to download when i instal it says i already have it what can i do? Tag: WPA-PSK client slow to connect Tag: 287695
  - 12
    - Internet Explorer proxy Hi, Is it possible to create internet explorer shortcut with proxy settings? And leave the default one WITHOUT proxy settings? Tag: WPA-PSK client slow to connect Tag: 287694
  - 13
    - Brand Watches Tissot Men's T-Tracx watch #T0104171703103 Discount, Brand Watches Tissot Men's T-Tracx watch #T0104171703103 Discount, Replica, Fake Browse our Tissot Men's T-Tracx watch #T0104171703103 replica watches, which is sure the watch you are looking for at low price. There are more high quality designer watch replicas for selection Tissot Men's T-Tracx watch #T0104171703103 Link : http://www.watches-brand.com/Replica-Tissot-16128.html Brand : Tissot ( http://www.watches-brand.com/Tissot-Replica.html ) Model : Tissot Men's T-Tracx watch #T0104171703103 Description : <p>Swiss quartz movement, Sport watch, Chronograph, Luminous hands and markers, Yellow and white indices on outer ring, Analog date display, Polished stainless steel silver-tone tachymetre bezel is engraved with black numbers and indices, resin and stainless steel case, Polished stainless steel crown, selector buttons and caseback, Sapphire crystal, 100 meters/330 feet water resistant</p> Sale Price : $ 210.00 Tissot Men's T-Tracx watch #T0104171703103 Details : <ul> <li>Watches-Price Sales Rank: #9670 in Watches </li> <li>Brand: Tissot</li> <li>Model: T010.417.17.031.03</li> <li>Band material: Rubber</li> <li>Bezel material: stainless-steel</li> <li>Case material: stainless-steel</li> <li>Clasp type: deployment-clasp</li> <li>Dial color: Yellow resin case with brushed/polished stainless</li> <li>Dial window material: scratch-resistant-sapphire</li> <li>Movement type: Swiss Quartz Movement</li> <li>Water-resistant to 330 feet</li> </ul> <h3>Features</h3> <ul> <li>Tissot T-Tracx Collection</li> <li>Case Diameter - 45 MM</li> </ul> Tissot Men's T-Tracx watch #T0104171703103 is new brand replica, join thousands of satisfied customers and buy your Tissot with total satisfaction. A watches-brand.COM 30 Day Money Back Guarantee is included with every Tissot Replica Series for secure, risk-free online shopping. watches-brand.COM does not charge sales tax for the Fake Tissot Men's T-Tracx watch #T0104171703103. All of our replica watches are shipped via EMS to worldwide. Normally it takes 3days to prepare the fake watch you ordered and 5-10days to transmit depending on the different destination.We pay for the free shipping cost for total quantity over 20 pcs. The EMS tracking NO. will be sent by email when an order is shipped from our warehouse. No more other charges from watches-brand.com such as the tax. If you have any other questions please check our other pages or feel free to email us by sales@watches-brand.com. The Same Replica Tissot Watches Series : Tissot Women's T-Wave watch #T02128571 : http://www.watches-brand.com/Replica-Tissot-16129.html Tissot Women's T-Wave watch #T02128551 : http://www.watches-brand.com/Replica-Tissot-16130.html Tissot Women's T-Wave watch #T023.309.16.031.00 : http://www.watches-brand.com/Replica-Tissot-16131.html Tissot Women's T-Wave watch #T02125571 : http://www.watches-brand.com/Replica-Tissot-16132.html Tissot Women's T-Wave watch #T02126571 : http://www.watches-brand.com/Replica-Tissot-16133.html Tissot Ladies Watches T-Wave T02.1.215.61 - AA : http://www.watches-brand.com/Replica-Tissot-16134.html Tissot Ladies Watches T-Wave T02.1.225.51 - AA : http://www.watches-brand.com/Replica-Tissot-16135.html Tissot Ladies Watches T-Wave T02.1.285.54 - 3 : http://www.watches-brand.com/Replica-Tissot-16136.html Tissot Ladies Watches T-Wave T02.1.285.61 - 2 : http://www.watches-brand.com/Replica-Tissot-16137.html Tissot Men's TXL Dress Watch #T60.1.581.52 : http://www.watches-brand.com/Replica-Tissot-16138.html Brand Watches Tissot Men's T-Tracx watch #T0104171703103 Discount, Replica, Fake Tag: WPA-PSK client slow to connect Tag: 287692
  - 14
    - Brand Watches Victorinox Swiss Army Professional Dive Master 500 Mens Brand Watches Victorinox Swiss Army Professional Dive Master 500 Mens Orange Dial Black Rubber Strap Stainless Steel Watch V.251041 Discount, Replica, Fake Browse our Victorinox Swiss Army Professional Dive Master 500 Mens Orange Dial Black Rubber Strap Stainless Steel Watch V.251041 replica watches, which is sure the watch you are looking for at low price. There are more high quality designer watch replicas for selection Victorinox Swiss Army Professional Dive Master 500 Mens Orange Dial Black Rubber Strap Stainless Steel Watch V.251041 Link : http://www.watches-brand.com/Replica-Swiss-Army-Victorinox-14743.html Brand : Swiss Army Victorinox ( http://www.watches-brand.com/Swiss-Army-Victorinox-Replica.html ) Model : Victorinox Swiss Army Professional Dive Master 500 Mens Orange Dial Black Rubber Strap Stainless Steel Watch V.251041 Description : <p>Stainless Steel Case, Screw-in Caseback, Orange Dial, Luminous Hands and Hour Markers, Date with Magnifier Displayed at the 3 Oclock Position, Scratch Resistant, Anti-Reflection Sapphire Crystal, Unidirectional Rotating Bezel, Protected Screw-Down Crown, Black Rubber Strap, End-of-Battery-Life Indicator, Swiss-made Analog Quartz Movement, Water Resistant to 500 Meters, 50 ATM, 1650 FT, Case Dimensions: 43 mm in Diameter.</p> Sale Price : $ 210.00 Victorinox Swiss Army Professional Dive Master 500 Mens Orange Dial Black Rubber Strap Stainless Steel Watch V.251041 Details : <ul> <li>Watches-Price Sales Rank: #19872 in Watches </li> <li>Brand: Swiss Army</li> <li>Model: V.251041</li> <li>Band material: Black Rubber Strap</li> <li>Bezel material: Stainless Steel Bezel</li> <li>Case material: Stainless Steel Case</li> <li>Dial color: Orange Dial</li> <li>Dial window material: Anti-Reflection Sapphire Crystal</li> <li>Movement type: Swiss Quartz Movement</li> <li>Water-resistant to 1650 feet</li> </ul> Victorinox Swiss Army Professional Dive Master 500 Mens Orange Dial Black Rubber Strap Stainless Steel Watch V.251041 is new brand replica, join thousands of satisfied customers and buy your Swiss Army Victorinox with total satisfaction. A watches-brand.COM 30 Day Money Back Guarantee is included with every Swiss Army Victorinox Replica Series for secure, risk-free online shopping. watches-brand.COM does not charge sales tax for the Fake Victorinox Swiss Army Professional Dive Master 500 Mens Orange Dial Black Rubber Strap Stainless Steel Watch V.251041. All of our replica watches are shipped via EMS to worldwide. Normally it takes 3days to prepare the fake watch you ordered and 5-10days to transmit depending on the different destination.We pay for the free shipping cost for total quantity over 20 pcs. The EMS tracking NO. will be sent by email when an order is shipped from our warehouse. No more other charges from watches-brand.com such as the tax. If you have any other questions please check our other pages or feel free to email us by sales@watches-brand.com. The Same Replica Swiss Army Victorinox Watches Series : Swiss Army Men's Ground Force Mechanical Steel Watch V25791 : http://www.watches-brand.com/Replica-Swiss-Army-Victorinox-14744.html Swiss Army Men's Ground Force Mechanical Strap Watch V.25792 : http://www.watches-brand.com/Replica-Swiss-Army-Victorinox-14745.html Swiss Army Men's Ground Force Chronograph Steel and Titanium Watch V25788 : http://www.watches-brand.com/Replica-Swiss-Army-Victorinox-14746.html Swiss Army Men's Ground Force Chronograph Steel & Tiutanium Watch V. 25786 : http://www.watches-brand.com/Replica-Swiss-Army-Victorinox-14747.html Swiss Army Victorinox Men's Watches Seaplane 25075 - 2 : http://www.watches-brand.com/Replica-Swiss-Army-Victorinox-14748.html Swiss Army Victorinox Men's Watches Seaplane 25582 - 2 : http://www.watches-brand.com/Replica-Swiss-Army-Victorinox-14749.html Victorinox Swiss Army Professional SeaPlane Mens Watch V.25076 : http://www.watches-brand.com/Replica-Swiss-Army-Victorinox-14750.html Swiss Army Victorinox Men's Watches Seaplane 25075 - AA : http://www.watches-brand.com/Replica-Swiss-Army-Victorinox-14751.html Swiss Army Victorinox Men's Watches Seaplane 25076 - AA : http://www.watches-brand.com/Replica-Swiss-Army-Victorinox-14752.html Victorinox Swiss Army Professional Seaplane Mens Watch V25582 : http://www.watches-brand.com/Replica-Swiss-Army-Victorinox-14753.html Brand Watches Victorinox Swiss Army Professional Dive Master 500 Mens Orange Dial Black Rubber Strap Stainless Steel Watch V.251041 Discount, Replica, Fake Tag: WPA-PSK client slow to connect Tag: 287691
  - 15
    - cannot communicate with printer wireless I have installed a Lynksys wireless printer server. Three computers, two laptops with XP Pro and one desktop with XP. All either SP2 or SP3. The wireless server works nicely in that we can print but a dialogue box comes up and says "Printer not responding." Even so, it prints. The problem being that there apparently is not two way communication with the printer across the wireless network and therefore we cannot get the status of the printer, ie ink status. Printer is a Canon Pixma iP4500. Any help out there? -- PROINWV Tag: WPA-PSK client slow to connect Tag: 287690
  - 16
    - Migrating to DHCP Believe it or not there are still companies that have IT people that don't depoly DHCP and just so happens I just started working for one such company. Anyways I'm trying to find an easy way to change all the clients (300) over to DHCP from static IP addressing. I've been unable to locate a script, program or GP setting that will assist and I don't want to have to do this manually. Any ideas or suggestions we be great! Tag: WPA-PSK client slow to connect Tag: 287687
  - 17
    - Mapped Drive not showing share name We have an issue on many of our office XP workstations where they will have 5 or 10 mapped drives which re-map through logon scripts however sometimes one of them will just say Network Drive (G:) or whatever the letter is instead of saying something like sharename$ on servername (G:) Does anyone have any ideas? Tag: WPA-PSK client slow to connect Tag: 287686
  - 18
    - Cannot connect to the printer operation could not be completed I used to have two desktops A & B, they have internet sharing an printer sharing , they were working fine Desktop A XP Professional SP2 PC has got two printers (HP an Samsung) connected directly (USB cable), and Printer sharing is turne on I bought another Desktop to replace B, because B is an old PC From the Desktop B, when attempting to chose the option Code ------------------- A network printer, or a printer attached to another computer ------------------- , to add a shared printer , I can browse and see the printers name (h and Samsung), however, when I attempt t connect both of them, I get the following error: Code ------------------- cannot connect to the printer operation could not be completed erro ------------------- Do I need to have admin account with their passwords on both Deskto to be able to share the printers Tag: WPA-PSK client slow to connect Tag: 287679
  - 19
    - Denied Access to Workstation & Shares After Crash I have two workstations running Windows XP Pro connected to each other directly via a crossover cable and networked together as a workgroup. The power went off in the office and the UPS for one of the workstations failed. So it went down hard. Ever since then that workstation will no longer allow the other workstation access to its shares, but the other workstation can be accessed just fine. I can't even access that workstation to look at the shares. When users attempted to access that workstation from the problem free workstation they are denied access and their accounts are locked out on the problem workstation. I have verfied that the usernames and passwords are the same on both workstations. When they attempt logon as the adminstrator they get a logon prompt, but of course are still denied access. Regular users don't get a logon prompt. They only got an error saying they do not have access and/or have been locked out. I checked the local security policies on both machines and they are exactly the same. The windows firewall is not running and the service has been stopped entirely on both workstations. The security logs are not full. I was told by a friend that I should check the registry setting under HKLocalMachine > System > CurrentControlSet > Control > Lsa for the crashonauditfail option to verify that it was not set to a 2. I checked and it was set to 1. I set it to 0 to verify that it was not a problem with that. When the users attempted to logon after that, they were given a logon prompt, but still not allowed access to the computer or its shares. However they were no longer being instatnly locked out on that problem workstation. In the Event Viewer security logs it only stays "Unknown username or bad password" in failed event when that user's attempt to access the computer. Any help or suggestions about what to check now would be greatly appreciated. Thanks. Tag: WPA-PSK client slow to connect Tag: 287676
  - 20
    - Ping stops responding. Hi, I know that ping failures is a frequent problem, and there is alot of info available on how to troubleshoot this type of problem, but my problem is subtley different from most. I have two computers, (A) is an XP Pro Laptop, (B) is a Windows 2000 Server Desktop. Both have static IP Address, (A) 192.168.1.10 and (B) is 192.168.1.11 Both have subnet masks of 255.255.255.0 (B) and (A) are networked together through a 3Com Hub. These are the only two machines on the network. Quite simple. Anyway, to the problem: 1) (B) cannot ping (A). At all. 2) (A) CAN ping (B), but after a few minutes the ping responses stop with 'request timed out'. There is no firewall running on either machine. I know that is bd practice, but I am trying to solve this intermittent connection problem. So, what could be causing ping packets to be blocked from (B) to (A), and what could cause pings from (A) to (B) to run for a while, before getting 'request timed out'. Any suggestions appreciated. Regards Tag: WPA-PSK client slow to connect Tag: 287664
  - 21
    - Cannot create VPN connection on a domain member Hello, i tried to create a VPN connection on one of our clients. The wizzard appear, I setup a new VPN connection - but when I click "Finish", the wizzard will close, but there will be no new VPN connection. Can't I create a VPN connection, because the client is a domain member or what is going on? Network: Server: Win2k3 SBS Clients: Windows XP SP2 (domain members) Regards, Igor Tag: WPA-PSK client slow to connect Tag: 287660
  - 22
    - I can not connect to the internet I currently have two computers (both windows XP SP2) connected to cable internet through a Netgear WGR614v7 wireless router, which replaced my old one yesterday, but the problem started way before that. It started with a momentary blackout, which left my old router not working, half a week later, we had some really bad weather (125km/h wind) which gave me multiple blackouts, and, like normal, my router started working again, (don't ask me why, it just always seems to do it.) a couple of days later it finally went dead. my problem is this: my second (newer) computer will no longer connect to the internet. now there are some odd occurrence with this, the light on the router shows up, meaning the computer is connected, but the router does not say that the router is connected when you look at attached devices in the settings. also whenever I turn the computer on, it tells me that the network connection has 'limited or no connectivity' due to an nonrenewable IP, and when i look at the values for the connection, it shows up the physical address, it comes up as 169.254.202.29, rather than 192.168.1.3, as it should. i have tried everything i can thing of, tested the Ethernet cable, reinstalled netwwork adapter, new router, tried with different Ethernet cables. but none have succeeded, does anybody have any ideas at all or should i just try re-installing windows? Tag: WPA-PSK client slow to connect Tag: 287657
  - 23
    - XP Firewall - replacing 'netfw.inf' on client machines. A little background. We recently completed a migration to a new network and domain (~1200 clients) and I need to deploy a firewall setting change to all systems to reflect the scope change for some of the allowed applications (for example, SMS Remote). All the clients that existed before the migration have scopes that are no longer valid for the allowed applications. All clients deployed after the migration are using a different image so their scopes are set correctly. Can anyone recommend the best route to remedy this? I don't believe Group Policy is the right way as we are not looking to introduce new exceptions but rather edit the existing ones on the older clients. I was thinking that replacing the "netfw.inf" (with the desired settings) and running "netsh firewall reset" would be the best route. After some thought though, I am concerned as to what would happen to the exceptions that existed on some clients that may not be included in the updated "netfw.inf" (ie: applications that the users themselves have installed. Not all systems have the same apps installed). Would they disappear? Thank you. Tag: WPA-PSK client slow to connect Tag: 287654
  - 24
    - XP, Network Drives, Disconnect Drives require a sync of offline fi Some of our XP Laptops are display a wierd behaviour where if the machine is disconnected from the network and then reconnects the mapped drives will not appear until the user intializes a sync of they offline files. The staff homes drives are used with caching enabled so the files are available at home. This is not as seemless as we like. Tag: WPA-PSK client slow to connect Tag: 287652
  - 25
    - Maximum 10 connections at a time! Dear all, First question: Can we by any chance increase the number of connections that windows XP professional hold? as I know, the maximum number is 10, can we increase that? Second: How can I count the number of connections on the server if was XP professional? I need to know whether I am reaching the maximum or not, Thanks! Tag: WPA-PSK client slow to connect Tag: 287651
- Next
  - 1
    - Comments field in Windows Explorer columns delayed--XP, network drive The comments field in MS Word is available for view in Windows Explorer; however, when I open a folder on a network drive with the comments column visible, it fails to load the comments in the Word document, or loads them extremely slow. Any ideas? Thanks, Tag: WPA-PSK client slow to connect Tag: 287644
  - 2
    - Networking problem!! Wierd one!! Dears, I have a software running on a server computer "XP Professional" and other computers all having XP Professional, I have changed the session suspession to be more than an hour. The problem is that: if 4 computers or less are connected to the server, the session can stay alive for 30 mins and more and works properly, otherwise, if 5 or more, the session works for 15 mins or less, after the 15 minutes, it droppes and dies. any help, please??? Cheers! Tag: WPA-PSK client slow to connect Tag: 287643
  - 3
    - Cannot Ping or see two of three workgroup PC's All of a sudden.. two desktops cannot see each other. The two desktops can see only the laptop. Computers A, B, and C. B being the laptop. A and C can ping B But B, cannot ping A or C, nor can A ping C, or C to A. All in the same workgroup. All firewalls shut off. I am not sure if it is possible.. but can the installation of ACT on A cause this problem? I am thinking that an update was made on the two desktops and changed a setting. I recall a registry change to a "zero" setting for a fix.. but this may be for something else.... Any thoughts appreciated. Tag: WPA-PSK client slow to connect Tag: 287642
  - 4
    - WAP or WEP My friend is trying to establish wireless connection for laptop via Linksys wireless-B router, and she was asked to enter WAP or WEP. How do you know which and what do you enter? I've never had this happen to me so I don't know how to help her. She is running Windows XP professional. Please help! Tag: WPA-PSK client slow to connect Tag: 287632
  - 5
    - something happend to ssl certs. All websites broken Hey guys, as of yesterday something happened to my computer and now any website I go to that uses SSL is broken. I've tried with firefox and IE and it's the same problem. I mostly use firefox so I took screenshots of the errors in that since I'm not sure how to view the certs in IE. I've taken a few screenshots you can see in this gif. A new snap loads every 2 seconds. A quick note about the first image. My home page is yahoo.com but the cert error is *.google.com my only guess might be that I am using the google notebook plugin but regardless I shouldn't be getting these errors at all. As you'll notice all the certs I "examined" show that they are "not part of a certificate". So something is definitely messed up on my pc. I've reinstalled firefox and am current on windows update but no luck. I don't get this problem on any other computer. http://buggyonpurpose.com/random/cert-problems.gif I'd appreciate ANY help I can get because this is quite annoying. One site in particular wont load at all for me when it goes into ssl mode. It's as if the website doesn't exist but I know better of course (it's my own site!) Thanks Tag: WPA-PSK client slow to connect Tag: 287631
  - 6
    - Disabling Automatic Redial I have 2 comps on a LAN, both of which connect to ISP via the client. Everything works well. On both comps, the Internet Options/Connections are set to "Never dial a connection" The problem is that when we are intentionally off line, occasionally something is causing an (automatic?) redial. I have no idea which machine is doing this, or how to find out (in a reasonable amount of time). It is causing a real problem with our fax setup, however. Is there some way to prevent this auto redial, or at least find out what is causing it? Both comps are WinXP, SP2, IE6 and OE6 - pretty standard otherwise, although both have acquired a number of special apps over their lifetime (2 - 3 years). Appreciate any suggestions. Dave Tag: WPA-PSK client slow to connect Tag: 287630
  - 7
    - How many PCs allowed under XP Home? We have 6 PCs that seem to be networked to each other successfully under XP Home. However, upon installing a network printer (that appears as a PC under MS Network) we now seem to have problem connecting. Also, we have an Apple and 2 laptops that can connect wirelessly. Could the problem be down to having too many PCs under XP Home? We have one PC that has XP Pro but we don't have a server. Sometimes the PCs can connect to the printer but sometimes they can't, it's very random. The printer is an Epson Aculaser C100N. Thank you for your attention and any advice you can give us. David H. Tag: WPA-PSK client slow to connect Tag: 287629
  - 8
    - Joining a 2003 domain "The following error occurred attempting to join the domin: Logon failure: unknown user or bad password." I'm trying to join a Dell Latitude D520 with XP Pro SP2 to a 2003 domain and that is the error I'm getting. I've swapped the hard drive with a known good hard drive that I was able to join to the domain with no success. The hard drive out of the suspect laptop was able to join the domain in another laptop. The laptop is getting an IP address and can get out to the web. It's pulling everything it needs except joining the domain. All acccounts used (4 so far) are domain admins. I checked the log and am getting a returned 1326 error. Any ideas? Tag: WPA-PSK client slow to connect Tag: 287628
  - 9
    - Remote Shutdown I am running XP on this machine, but i have a computer downstairs running 2000. i lately have been exploiting the CMD commands, but i still cannot remote shutdown the computer. it tells me "access is denied". any reason why? any way to fix? thanks in advance, C Tag: WPA-PSK client slow to connect Tag: 287621
  - 10
    - Wireless Connection I am traveling this week. Last week and this morning my wireless connection work just fine. I changed hotels and am trying to connect. I see a strong strength for the hotel but when I connect, I get a limited connection. I have deleted out all my previuos connection and rebooted. Still limited. Can anyone help me here... Tag: WPA-PSK client slow to connect Tag: 287620
  - 11
    - No network access, winlogon.exe 50% Beginning on Monday of last week I have 5 workstations and counting (amongst 400) that have lost the ability to connect to and authenticate to our network server shares or AD but yet are able to access the internet. The issue is also not limited to the individual user profile as our own (admin) logins on the affected systems also fail to reach these servers from affected machines. An error of "no path found" or "you may not have proper permissions" occurs. The other identifiable feature is that the winlogon.exe process is consuming 50% of the CPU capacity. The system responds to a ping, and can ping other systems including the systems with shares that can't be accessed. Nbtstat, shows nothing listed. Running F-Port revealed that most of the communications ports pid's were Not tied to a directory (McAfee and RDT did). I have tried practically everything I can think of: >Ran Full McAfee scan, removed & reinstalled McAfee 8.5i >Ran process explorer- nothing unusual >Ran Rootkit revealer- no root kits seen >Ran WireShark, nothing obvious was evident >Removed system from Domain >Unchecked and Re-installed Client for MS Neworks & File & Print from local network connection. >Tried connecting to vpn, failed >Ran sfc, no errors > Ran netsh int ip reset, seemed to hang, fail Any ideas or help appreciated! (also posted on RedmondMag.) Tag: WPA-PSK client slow to connect Tag: 287619
  - 12
    - Windows Xp User Synchronise Hello! I have been reading a articel from knowledgebase. The web adress for it is http://support.microsoft.com/kb/811660/en I have been for a long time trying to fix that issue without reinstalling windows and what exactly my hypothetic solution is, that you just clean the whole list through some way so you just get the synch path from one use on one single computer. I have ben reading many more articels about this and it seems like this is possible to do by reseting one key in regedit. Im wondering if someone could tell me exactly what key is it that i should reset in regedit and how in order to clean the list and so i dont get a list from many previous users and just to make it clear i dont what to put them on inactivity i just want the list to be fresh and clean from scratch. Best Regards Insect Tag: WPA-PSK client slow to connect Tag: 287618
  - 13
    - AOL Broadband / Win XP networking confliction I set up the router on PC1 using the AOL disk and instructions provided, connecting by Ethernet. Set up PC2 using AOL disk and network adaptor. Shared 'Shared Documents' from PC1 with PC2. PC1 is shown amongst 'My Network Places' on both PCs, but can't make PC2 visable on PC1. Have tried Network Wizards. Security software seems to contradict, stating that network belongs to PC2, and that PC1 isn't on the network. Tag: WPA-PSK client slow to connect Tag: 287597
  - 14
    - HSDPA and LAN Hi folks, I'm on a company LAN with very restricted internet policies. I also have a mobile phone with a HSDPA connection. I have set this up to connect and the connection is working fine. If I use either the local area connection or the phone connection, everything works as expected. With the former I get all access to local servers, the Intranet, and restricted access to the Internet. With the latter I get unrestricted access to the Internet but no local access. If I activate BOTH though, it behaves erratically. Sometimes I don't get internet access. Sometimes I don't get local access. Sometimes I don't get ANY access. The moment I disable one of the two connections, it reverts back to normal behaviour for the remaining connection. I guess, ignoramus as I am, that this must have something to do with Routing? Would anyone have the patience to help a complete n00b out? Tag: WPA-PSK client slow to connect Tag: 287591
  - 15
    - Windows Auditing Any tools available to Audit a windows XP operating system? i-e missing patches, mis configurations, access controls etc. Tag: WPA-PSK client slow to connect Tag: 287587
  - 16
    - DNS resolution not working Hi, I have a problem with DNS resolution on a few desktops on our network. They randomly stop being able to resolve DNS names within applications other then nslookup. This is what works and doesnt. nslookup: works fine, resolves the host names. ping: fails on resolving the host name, but will ping if ip address is entered. ie: fails on host name, works on ip. Tried ipconfig /flushdns, doesnt fix the problem. But "ipconfig /release & ipconfig /renew" fixes the problem for a while. The DNS is working fine, as nslookup works and other computers on the network are not affected. the problem appears to be location on the desktop, but I am not sure what is causing it, driver problem? I have searched for this and found a few other peopel else where have had a similar problem but no solution was found. Any help would be appriciated. Thanks Tag: WPA-PSK client slow to connect Tag: 287586
  - 17
    - Exclamation mark impossibile to avoid on any nic 8139 I have a great problem on XP Pro Sp2. Notice: Hardware P4 dual and nic realtek 8139 fully working. Tested with any kind of Linux. No virus. No troyan. Tried sfc/scannnow and reinstallation over current XP starting from CD. I've tried everything, even started with UBCD4Win (avoiding the lock on hardware profiles in the registry) and deleting every reg entry I can found bounded to the nic, and every drivers present in the HD, inf, and even from .cab archive cache. I have disabled the nic, installed a new one, and I got the same problem again. I've serched hidden nic, but I don't see any other nic ( Tested various drivers, from the original bounded with the nic (and is for XP) to new realtek update of this year. NOTHING! Everytime I reinstall the nic/driver, everything seems OK, but finally XP says (sorry for traslation because my system is Italian located) that it can find a file. I don't know what file because it says nothing about this file. Every kind of driver i tested say that. Do you have any procedure to check every single step XP do to reach that bad result? A system to debug the problem step, by step finding why Xp end to that result? Tag: WPA-PSK client slow to connect Tag: 287584
  - 18
    - drmsmc port 1878 - what is this? Please if someone could tell me what this "service" is or what drmsmc relates to would be much appreciated. Noticed it connected as a system service using ewido's analysis feature. Thanks Tag: WPA-PSK client slow to connect Tag: 287583
  - 19
    - How to secure your windows XP and network Windows XP could best secure with a new suite of software Secure Auditor. Single IP license just $ 100 which is capable of performing auditing, event log management, windows password auditing, port scanning, windows inventory and asset management, ftp brutforce attack, http bruteforce attack etc. Other modules of this tool are also capable of performing audit on Oracle, MSSQL and Cisco routers with around 30 embedded tools. You know what is the best thing about Secure Auditor is? It provides complete specification and solution of identified vulnerabilities. Just check it out! Download link http://www.download.com/Secure-Auditor/3000-2653-10826743.html?part=dl-SecureAud&subj=uo&tag=button Tag: WPA-PSK client slow to connect Tag: 287582
  - 20
    - can't connect to computer I have a desktop computer and a laptop computer networked together. The desktop is running XP home, the laptop Pro. Both computers see the other one in the "view workgroup computers" and my laptop can access my desktop, but when I try to access the laptop from the desktop I get an error message stating that my laptop is unavailable and I might not have permission to access that resource. Why is this and how can I fix it? Tag: WPA-PSK client slow to connect Tag: 287579
  - 21
    - Wit's End with Networking Here's my deal: I have four computers. One is an iMac hardwired to my Belking router. The other three are laptops--one MacBook and two PC's running XP Pro. All four can access the internet, three of them wirelessly. My Macs can see each other, share files, copy files, etc. I'd like my PC's to do the same. I don't care if the PC's can see the Macs. I'd like to be able to share files between the two PC's, since one is in a remote part of the house. My problem: Everything I've tried, using HP help, Microsoft help and a next door neighbor who claims expertise on PC's has proven unsuccessful. I've put in about six hours on this and I'm where the title of this post suggests. Isn't there a simple way to have these two computers recognize each other? Thanks in advance. Tag: WPA-PSK client slow to connect Tag: 287573
  - 22
    - New connection, have I been hacked I use Live Messenger and a file sent to me was blocked. I have a wireless adapter and connect to my neighbours router (yes she gave me the access code) and I ussualy have a wireless connection logo in the system tray. When I started up the pc the other night I had an extra icon showing a cable connection to another computer. I also now have a modem installed in device manager. I think it is my neighbours computer which I am connecting to but aint to sure as neither of us is experts. The pc is also running much slower now. I'd love to know of anyway of identifying a deliberate attack from someone. Here's what the modem log says. 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\tapisrv.dll, Version 5.1.2600 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\unimdm.tsp, Version 5.1.2600 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\unimdmat.dll, Version 5.1.2600 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\uniplat.dll, Version 5.1.2600 04-06-2008 21:59:19.421 - File: C:\WINDOWS\system32\drivers\modem.sys, Version 5.1.2600 04-06-2008 21:59:19.421 - File: C:\WINDOWS\system32\modemui.dll, Version 5.1.2600 04-06-2008 21:59:19.421 - File: C:\WINDOWS\system32\mdminst.dll, Version 5.1.2600 04-06-2008 21:59:19.421 - Modem type: Communications cable between two computers 04-06-2008 21:59:19.421 - Modem inf path: mdmhayes.inf 04-06-2008 21:59:19.421 - Modem inf section: M2700 04-06-2008 21:59:19.421 - Matching hardware ID: pnpc031 04-06-2008 21:59:19.453 - 19200,8,N,1, ctsfl=1, rtsctl=2 04-06-2008 21:59:19.453 - Initializing modem. 04-06-2008 21:59:19.453 - Waiting for a call. 04-06-2008 21:59:19.484 - 19200,8,N,1, ctsfl=1, rtsctl=2 04-06-2008 21:59:19.484 - Initializing modem. 04-06-2008 21:59:19.484 - Dialing. 04-06-2008 21:59:19.500 - Send: CLIENT 04-06-2008 21:59:21.500 - Timed out waiting for response from modem 04-06-2008 21:59:21.500 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:21.515 - Send: CLIENT 04-06-2008 21:59:23.515 - Timed out waiting for response from modem 04-06-2008 21:59:23.515 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:23.531 - Send: CLIENT 04-06-2008 21:59:25.531 - Timed out waiting for response from modem 04-06-2008 21:59:25.531 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:25.546 - Send: CLIENT 04-06-2008 21:59:27.546 - Timed out waiting for response from modem 04-06-2008 21:59:27.546 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:27.546 - Hanging up the modem. 04-06-2008 21:59:27.546 - Hardware hangup by lowering DTR. 04-06-2008 21:59:29.546 - A timeout has expired waiting to comm event to occour. 04-06-2008 21:59:29.546 - 19200,8,N,1, ctsfl=1, rtsctl=2 04-06-2008 21:59:29.546 - Initializing modem. 04-06-2008 21:59:29.546 - Waiting for a call. 04-06-2008 21:59:29.546 - Session Statistics: 04-06-2008 21:59:29.546 - Reads : 0 bytes 04-06-2008 21:59:29.546 - Writes: 0 bytes I certainly didn't set this up, please help Tag: WPA-PSK client slow to connect Tag: 287568
  - 23
    - New connection appeared, is it a virus I use Live Messenger and a file sent to me was blocked. I have a wireless adapter and connect to my neighbours router (yes she gave me the access code) and I ussualy have a wireless connection logo in the system tray. When I started up the pc the other night I had an extra icon showing a cable connection to another computer. I also now have a modem installed in device manager. I think it is my neighbours computer which I am connecting to but aint to sure as neither of us is experts. The pc is also running much slower now. I'd love to know of anyway of identifying a deliberate attack from someone. Here's what the modem log says. 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\tapisrv.dll, Version 5.1.2600 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\unimdm.tsp, Version 5.1.2600 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\unimdmat.dll, Version 5.1.2600 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\uniplat.dll, Version 5.1.2600 04-06-2008 21:59:19.421 - File: C:\WINDOWS\system32\drivers\modem.sys, Version 5.1.2600 04-06-2008 21:59:19.421 - File: C:\WINDOWS\system32\modemui.dll, Version 5.1.2600 04-06-2008 21:59:19.421 - File: C:\WINDOWS\system32\mdminst.dll, Version 5.1.2600 04-06-2008 21:59:19.421 - Modem type: Communications cable between two computers 04-06-2008 21:59:19.421 - Modem inf path: mdmhayes.inf 04-06-2008 21:59:19.421 - Modem inf section: M2700 04-06-2008 21:59:19.421 - Matching hardware ID: pnpc031 04-06-2008 21:59:19.453 - 19200,8,N,1, ctsfl=1, rtsctl=2 04-06-2008 21:59:19.453 - Initializing modem. 04-06-2008 21:59:19.453 - Waiting for a call. 04-06-2008 21:59:19.484 - 19200,8,N,1, ctsfl=1, rtsctl=2 04-06-2008 21:59:19.484 - Initializing modem. 04-06-2008 21:59:19.484 - Dialing. 04-06-2008 21:59:19.500 - Send: CLIENT 04-06-2008 21:59:21.500 - Timed out waiting for response from modem 04-06-2008 21:59:21.500 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:21.515 - Send: CLIENT 04-06-2008 21:59:23.515 - Timed out waiting for response from modem 04-06-2008 21:59:23.515 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:23.531 - Send: CLIENT 04-06-2008 21:59:25.531 - Timed out waiting for response from modem 04-06-2008 21:59:25.531 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:25.546 - Send: CLIENT 04-06-2008 21:59:27.546 - Timed out waiting for response from modem 04-06-2008 21:59:27.546 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:27.546 - Hanging up the modem. 04-06-2008 21:59:27.546 - Hardware hangup by lowering DTR. 04-06-2008 21:59:29.546 - A timeout has expired waiting to comm event to occour. 04-06-2008 21:59:29.546 - 19200,8,N,1, ctsfl=1, rtsctl=2 04-06-2008 21:59:29.546 - Initializing modem. 04-06-2008 21:59:29.546 - Waiting for a call. 04-06-2008 21:59:29.546 - Session Statistics: 04-06-2008 21:59:29.546 - Reads : 0 bytes 04-06-2008 21:59:29.546 - Writes: 0 bytes I certainly didn't set this up, please help Tag: WPA-PSK client slow to connect Tag: 287567
  - 24
    - How do I know if I've been hacked I use Live Messenger and a file sent to me was blocked. I have a wireless adapter and connect to my neighbours router (yes she gave me the access code) and I ussualy have a wireless connection logo in the system tray. When I started up the pc the other night I had an extra icon showing a cable connection to another computer. I also now have a modem installed in device manager. I think it is my neighbours computer which I am connecting to but aint to sure as neither of us is experts. The pc is also running much slower now. I'd love to know of anyway of identifying a deliberate attack from someone. Here's what the modem log says. 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\tapisrv.dll, Version 5.1.2600 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\unimdm.tsp, Version 5.1.2600 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\unimdmat.dll, Version 5.1.2600 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\uniplat.dll, Version 5.1.2600 04-06-2008 21:59:19.421 - File: C:\WINDOWS\system32\drivers\modem.sys, Version 5.1.2600 04-06-2008 21:59:19.421 - File: C:\WINDOWS\system32\modemui.dll, Version 5.1.2600 04-06-2008 21:59:19.421 - File: C:\WINDOWS\system32\mdminst.dll, Version 5.1.2600 04-06-2008 21:59:19.421 - Modem type: Communications cable between two computers 04-06-2008 21:59:19.421 - Modem inf path: mdmhayes.inf 04-06-2008 21:59:19.421 - Modem inf section: M2700 04-06-2008 21:59:19.421 - Matching hardware ID: pnpc031 04-06-2008 21:59:19.453 - 19200,8,N,1, ctsfl=1, rtsctl=2 04-06-2008 21:59:19.453 - Initializing modem. 04-06-2008 21:59:19.453 - Waiting for a call. 04-06-2008 21:59:19.484 - 19200,8,N,1, ctsfl=1, rtsctl=2 04-06-2008 21:59:19.484 - Initializing modem. 04-06-2008 21:59:19.484 - Dialing. 04-06-2008 21:59:19.500 - Send: CLIENT 04-06-2008 21:59:21.500 - Timed out waiting for response from modem 04-06-2008 21:59:21.500 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:21.515 - Send: CLIENT 04-06-2008 21:59:23.515 - Timed out waiting for response from modem 04-06-2008 21:59:23.515 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:23.531 - Send: CLIENT 04-06-2008 21:59:25.531 - Timed out waiting for response from modem 04-06-2008 21:59:25.531 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:25.546 - Send: CLIENT 04-06-2008 21:59:27.546 - Timed out waiting for response from modem 04-06-2008 21:59:27.546 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:27.546 - Hanging up the modem. 04-06-2008 21:59:27.546 - Hardware hangup by lowering DTR. 04-06-2008 21:59:29.546 - A timeout has expired waiting to comm event to occour. 04-06-2008 21:59:29.546 - 19200,8,N,1, ctsfl=1, rtsctl=2 04-06-2008 21:59:29.546 - Initializing modem. 04-06-2008 21:59:29.546 - Waiting for a call. 04-06-2008 21:59:29.546 - Session Statistics: 04-06-2008 21:59:29.546 - Reads : 0 bytes 04-06-2008 21:59:29.546 - Writes: 0 bytes I certainly didn't set this up, please help Tag: WPA-PSK client slow to connect Tag: 287566
  - 25
    - Can't ping my PC from the internet My PC has two network cards... One is an onboard gigabit connected to my LAN. The LAN is connected to a router, as are other PCs on my LAN. The router is connected to a cable modem. The second NIC is a 10/100mbit PCI card connected directly to another cable modem. The GigE NIC is hardcoded to an IP on my private network with the following settings: IP: 10.0.11.16 Mask: 255.255.255.0 DNS: 10.0.11.1, 64.59.135.143 Gateway: 10.0.11.1 Gateway metric: 100 (previously auto) Interface metric: 100 (previously auto) The 10/100 NIC pulls a dynamic IP from my cable internet provider and currently has the following settings: IP: 68.145.38.197 Mask: 255.255.255.0 DNS: 64.59.135.143, 64.59.135.145 Gateway: 68.145.36.1 Gateway metric: auto Interface metric: auto The router is configured with my private network info on the LAN side and dynamic settings pulled from my cable internet provider on the WAN side. Currently configured as follows: LAN side... IP: 10.0.11.1 Mask: 255.255.255.0 Gateway: 10.0.11.1 WAN side: IP: 68.145.78.218 DNS: 64.59.135.143 Gateway: 68.145.76.1 At this point I'm unable to connect to any services on the 100mb port, and up until my last settings changes and reboot I was not even able to ping the 100mb port. My last change was to put the gateway and interface metrics on the GigE port to 100 to ensure any remote traffic was going through that interface, and to keep my local LAN traffic on the GigE interface. I believe I should not have applied a metric to the GigE interface though. At this point I cannot connect to any services on either port. Before my last settings change I was able to connect the the remote desktop through the GigE interface, but not any longer. What I am trying to do: - Any PC on my LAN, except this one, should use the internet connection through the router. - This PC should pass local LAN traffic over the GigE port only. - This PC should pass internet traffic over the 100mb port only. The PC's on my LAN are all hardcoded for the 10.0.11.0/24 network. Gateway is 10.0.11.1. This appears to be working. This PC does not consistantly pass it's internet traffic through the 100mb port. I've tried removing the gateway IP from the GigE port, changing the gateway metric to 100, and finally the interface metric to 100. What should I be doing to make this work??? Tag: WPA-PSK client slow to connect Tag: 287555

I have SBS2003 & XP SP2 clients. Clients connect to the network quite happily
once logged in but will not during start up. This means Clients won't use
their roaming profiles. They all worked perfectly under WEP and when Open.
Any ideas please?

Top

Re: WPA-PSK client slow to connect by smlunatick

smlunatick
Mon Apr 21 10:56:10 PDT 2008

On Apr 21, 10:55=A0am, Stuart <Stu...@discussions.microsoft.com> wrote:
> I have SBS2003 & XP SP2 clients. Clients connect to the network quite happ=
ily
> once logged in but will not during start up. This means Clients won't use
> their roaming profiles. They all worked perfectly under WEP and when Open.=

> Any ideas please?

WPA is used for wireless network access to wireless access points /
routers. This does not seem to used for Windows Servers (SBS2003)
servers. You will need to check the wireless WPA set ups and you
might have to conside WPA entreprise configuration WPA Radius
settings. This might "sync-up" the wireless network with the Windows
Server.

Top

Re: WPA-PSK client slow to connect by Stuart

Stuart
Mon Apr 21 11:26:02 PDT 2008

Thanks for your post. All clients connect to a switch but for some they
connect via a WAP on the switch as well when no cable available. I've updated
a driver on 1 laptop and it worked fine but I did leave the laptop as "ctrl -
delete - enter" status for a few minutes before typing in the password. I'll
keep testing!!

"smlunatick" wrote:

> On Apr 21, 10:55 am, Stuart <Stu...@discussions.microsoft.com> wrote:
> > I have SBS2003 & XP SP2 clients. Clients connect to the network quite happily
> > once logged in but will not during start up. This means Clients won't use
> > their roaming profiles. They all worked perfectly under WEP and when Open.
> > Any ideas please?
>
> WPA is used for wireless network access to wireless access points /
> routers. This does not seem to used for Windows Servers (SBS2003)
> servers. You will need to check the wireless WPA set ups and you
> might have to conside WPA entreprise configuration WPA Radius
> settings. This might "sync-up" the wireless network with the Windows
> Server.
>

Top