XP Vista see each other but cannot connect

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Firewall in XP Home SP2 We cannot change the settings for the firewall, they are managed by the Policy Manager, but we are in XPHome SP2. We were trying to update Security Shield 2008 from PCSecurityShield, when the update would not install. Thier tech support had us uninstall the current version, in an attempt to install the update. No success. Our firewall settings are greyed out, and a bar across the top indicated they are being managed for our security by Policy Manager. We want to regain control of all security aspects of this machine. Any insight is appreciated. Thanks in advance, Dan Tag: XP Vista see each other but cannot connect Tag: 287166
  - 2
    - free server programs I am voluntering for a comunity support centre and I would like to setup something similar to windows server 2000, so that I can run active directory and remotly control user accounts from the server, however we dont have a budget for this software, does anyone know of free alternatives ? -- Message posted via WindowsKB.com http://www.windowskb.com/Uwe/Forums.aspx/windows-xp-network/200803/1 Tag: XP Vista see each other but cannot connect Tag: 287163
  - 3
    - How do I change workgroup membership in command window? Hi: How do I change workgroup membership of a workstation from a command window? (not via GUI or manual changes). Say from the default installation WORKGROUP to WG002. I can't figure out the "net use" command to do it, and haven't been able to locate a single source that simply addresses this one issue. Thank you in advance for your help. -- Roy Zider Tag: XP Vista see each other but cannot connect Tag: 287161
  - 4
    - XP SP2 Internet unstable, Vista on same network is fine My network problem is instability in the Internet access on my Windows XP SP2 Professional connected directly on the router with a UTP cat 5e. My notebook with Windows Vista Home Premium access the Internet smoothly, either wired (also UTP 5e) or wirelessly, using WEP. Both are connected to a DI-624 router. The router WAN port is connected to a Siemens Speedstream 4200 ADSL Modem for Internet access. I can´t find where the problem is. I am using Firefox on both computers. Doing basically the same thing. I can´t find even a starter point to solve this problem. My only guess is that it is OS related, haven´t installed Vista on the desktop machine, but that is too much, I just want my XP to work fine. Any help, hint or guess is much appreciated Thanks Tag: XP Vista see each other but cannot connect Tag: 287153
  - 5
    - Difference between "nslookup" and "whois" ? What is the difference between "nslookup" and "whois" ? For both I enter a domain name and get an IP. Do use both the same sources? Can I enter in both cases domain names with a 3rd level domain name e.g. aaa.yahoo.com Ken Tag: XP Vista see each other but cannot connect Tag: 287151
  - 6
    - Kerberos and Windows XP Home Edition Is there any way I can authenticate against a Kerberos Realm with Windows XP Home Edition, using either Microsoft Native or Third Party tools? Even on Windows XP-Prof, how do I do it, I would be thankful for any document illustrating this. Thanks anand Tag: XP Vista see each other but cannot connect Tag: 287143
  - 7
    - wireless networking and file sharing I know that you must have answered this question a thousand times and i apologise for that but as we two silver surfers are floundering around in a plethora of answers and methods I am hoping that you can point me to a link that will talk at me in basic terms. My friend and I want to share files between his laptop and my desktop. He already uses my internet connection wirelessly and without problem. what we need now is a basic instruction as to how to set up a network connection to share files. We have read all about mapping and have tried various wizards but every time we look into My Network Places we don't have any network places! I am sure that it is easy when you know how and we are probably getting nearly there but we don't know when it goes wrong. We both can complete the Set Up a Home or Small Office Wizard and we get to the bit where it says Finished and we think we have finished but.......... it is just teasing us. Please SOS save our sanity. Thanks Charlie Tag: XP Vista see each other but cannot connect Tag: 287142
  - 8
    - Network name no longer available When I try to copy a file or even save a file to any of my network drives, it tells me "the network is no longer available". However, when i try to do it on the other computer, it works perfectly. What should I do? -- Message posted via WindowsKB.com http://www.windowskb.com/Uwe/Forums.aspx/windows-xp-network/200803/1 Tag: XP Vista see each other but cannot connect Tag: 287141
  - 9
    - FTP fails with <filename>: Invalid Argument I am trying to use FTP to move a large (>80 GB) file to our mass storage facility here at NASA Langley. At around 45 GB I get the subject error. I found a knowledge base article that describes the problem for Win NT 4.0 and 2000 http://support.microsoft.com/kb/259837/en-us I assume that these fixes are in XP SP2. I am fully patched. So I assume I am running out of paged pool memory (I have 4 GB installed, 3GB available on an HP xw6400 with 2 Dual Xeons). The error occurred while running overnight with nothing else running. It is repeatable. The error also occurs with Filezilla, but it manages to get to > 70GB. Any ideas as to solution or work around? How do I find out how much paged pool I have? How do I increase its allocation? Thanks, Dan Tag: XP Vista see each other but cannot connect Tag: 287136
  - 10
    - XP machine cannot see vista machine because of rights? I just installed a new Vista machine onto a home network with two XP machines running on them. The vista machine sees all the shared folders on the XP machines, and my XP laptop sees the shared folders and printer on the vista machine. But the XP desktop does not see the vista machine when accessing my network places. However, when I select "view workgroup computers" on the XP, the Vista machine is displayed. And when I select properties for the vista machine in that window, I get an error message that reads "You do not have the appropriate access rights for the server." So my desktop knows the vista machine is there. All the machines use PC-cillin, and have the same firewall settings. But, I did once have Norton Antivirus on the desktop, but I removed it using the Norton Removal Tool. Is there a more speciific settting I have to make in the Vista machine or the XP machine to allow the XP to access the Vista shared folders? Tag: XP Vista see each other but cannot connect Tag: 287131
  - 11
    - Transferring from Vista to XP I have bought a new laptop running Vista. I have XP running on my home machine and want to transfer it across to my laptop too. How do I do this please? Tag: XP Vista see each other but cannot connect Tag: 287124
  - 12
    - LAN Card Drivers I am providing internet in my area through Local Area Networking. For a new connection I have to put a LAN Card in my client's pc if it does not have its own built-in Card. Some computers accept the LAN card and installs it drivers automatically but some time Computer asks for drivers. Please tell me about some driver package that have drivers for all types of LAN Card Drivers. |Best Regards| Shakeel Ahmad. Tag: XP Vista see each other but cannot connect Tag: 287121
  - 13
    - ip address assignment How the ip address assignment works? The router or ISP assigns the unique IP address to the host, but it is based on the geographic location? How to guarantee there is no two IP addresses the same in the world? Also, I wonder how the web site http://www.ip-adress.com/ identifies the ip address of a host? Tag: XP Vista see each other but cannot connect Tag: 287119
  - 14
    - Windows searching for network When responding to a prompt to have Window search for wireless networks, I clicked Network Connections, clicked Properties on my Wireless icon but there was no tab for Wireless Networks on the Networks Properties screen -- only General and Advanced tabs. My other computers list a Wireless Network tab and Windows can be configured to set up the network. Why is the tab not there and how can I get it there? I'm using Windows XP Home Ed. mickey Tag: XP Vista see each other but cannot connect Tag: 287118
  - 15
    - Requiring login values Hello experts, I have a simple network of 6 machines (all xp w/sp2). Machines #1 through #4 are work stations. Then I have set up 2 machines as basic file servers called FileServer1 and FileServer2. Currently, each machine can see all other machines on the network (including the 2 file servers). So, up to that point, I think I have everything running great. But, now I am stuck on how to do a few things on these machines: Firstly...how do I set it up so that work stations can "see" FileServer #2, but cannot log on to it (in other words, if they clicked on FileServer#2 in their Explorer, they would get a logon-screen). Then how do I get it set up so each workstation cannot see another.. (in other words, a workstation can only see FileServer #1, can see FileServer#2 but cannot logon (without the pswd) but can NOT see other workstations. I'm still working my way through the help files, but haven't found this yet. I'm sure it's something quite simple. But, I'm hoping you experts out there can offer some help. Thanks. avimia Tag: XP Vista see each other but cannot connect Tag: 287113
  - 16
    - Having to replace workgroup names I have an ongoing problems with two customers sites. Both are using XP Pro and using Peer to Peer networking, they are also using "simple Files Sharing". On a regulare basis the computers cannet see each other across the network, "Unable to open files you may not be authorised", if I change the workgroup on each machine than all is O.K. for a couple of weeks of so, what am I doing wrong ?? Tag: XP Vista see each other but cannot connect Tag: 287111
  - 17
    - What does "Target" mean when network browsing? Hi All, Sometimes when I am at a customer site, I will use Windows Explorer to find various network shares. Occasionally, after clicking on the root of share, I will get an icon titled "Target". If I click on it, the share opens as normal -- no harm no foul. It doesn't hurt anything. I have had this happen on both Windows Servers and Linux Samba servers. Any idea what this benign "Target" is? I am just real curious. Many thanks, -T Tag: XP Vista see each other but cannot connect Tag: 287100
  - 18
    - need wpa2 bridge recommendations Hi All, I am trying to connect a computer with an Ethernet port and no spare PCI slots to a small WPA2 protected wireless network. Does anyone have recommendation for a wireless bridge that supports WPA2? I had been using USR products, but had to stop using any of their products do to a hardware design defect in their eeproms circuits that kept them from saving changes. I also looked at the Linksys WET54G but no WPA2 (only wpa1). I found a ZyXel G-570S but have no experience with their reliability. Anyway, I thought it was time to ask for help. Many thanks, -T Tag: XP Vista see each other but cannot connect Tag: 287099
  - 19
    - Can't see files from limited accounts on home network I have two computers, one running Windows XP Pro SP2 and the other Windows XP Home SP2. Each computer has user accounts named "Primary" and "Kids". The Primary accounts are administrator access and the Kids accounts are limited. The computers are set up on a basic home network, with simple file sharing enabled, and selected folders set to be shared on the network. I can access all shared folders and files from anywhere on the network, except for the files under the limited Kids user accounts. When I try to access those from anywhere, I get an "Access is Denied" message. I've read everything I can find and gone through all sorts of troubleshooting scenarios but I can't figure it out. Can anyone help? Tag: XP Vista see each other but cannot connect Tag: 287097
  - 20
    - Downloads just stops Hi, I have a problem that occurs every time I try to download a (installer) program over the Internet. E.g. I tried to download/install acrobat reader and Google sketch with the same behaviour. I chose to download the program and after a second a dialog appears where I press the "run" button to start the installer and the file(s) download is starting. I can se how the download proceeds sometimes I manage to download 3% and sometimes 11%. First I thought that it was the firewall. I turned it off and even uninstalled it => no change. Then I tought it was the wifi network so I use cable => no luck. I did manage to download Opera browser when I chosed a FTP site instead of HTP (I could chose a download site in a scroll menu and I used one beginning with FTP instead of HTP) I thoought that it was IE7 but I have the same problem in Opera, I cant install Sketch Up from Opera either!! I have run Windows Update so I should have the latest patches etc... What could be the problem? /di98mase Tag: XP Vista see each other but cannot connect Tag: 287088
  - 21
    - Windows XP port 445 listening on wrong subnet Hi, Due to my total stupidity it has taken me a while to figure out what was happening here, but I eventually click. I thought it was something to do with the firewall being misconfigured, but it isn't really. From netstat: Proto Local Address Foreign Address State TCP 0.0.0.0:23 0.0.0.0:0 LISTENING TCP 0.0.0.0:135 0.0.0.0:0 LISTENING TCP 0.0.0.0:445 0.0.0.0:0 LISTENING TCP 0.0.0.0:1026 0.0.0.0:0 LISTENING TCP 0.0.0.0:1723 0.0.0.0:0 LISTENING TCP 0.0.0.0:1801 0.0.0.0:0 LISTENING TCP 0.0.0.0:2103 0.0.0.0:0 LISTENING TCP 0.0.0.0:2105 0.0.0.0:0 LISTENING TCP 0.0.0.0:2107 0.0.0.0:0 LISTENING TCP 0.0.0.0:2869 0.0.0.0:0 LISTENING TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING TCP 127.0.0.1:1031 0.0.0.0:0 LISTENING TCP 127.0.0.1:1074 0.0.0.0:0 LISTENING TCP 192.168.0.12:23 192.168.0.1:48013 ESTABLISHED TCP 192.168.0.12:139 0.0.0.0:0 LISTENING TCP 192.168.0.12:3389 192.168.0.1:47402 ESTABLISHED TCP 192.168.0.12:3525 192.168.0.6:445 ESTABLISHED TCP [::]:23 [::]:0 LISTENING 0 TCP [::]:135 [::]:0 LISTENING 0 TCP [::]:1026 [::]:0 LISTENING 0 TCP [::]:2103 [::]:0 LISTENING 0 TCP [::]:2105 [::]:0 LISTENING 0 TCP [::]:2107 [::]:0 LISTENING 0 TCP [::]:2869 [::]:0 LISTENING 0 UDP 0.0.0.0:161 *:* UDP 0.0.0.0:445 *:* UDP 0.0.0.0:500 *:* UDP 0.0.0.0:1025 *:* UDP 0.0.0.0:1032 *:* UDP 0.0.0.0:1038 *:* UDP 0.0.0.0:1144 *:* UDP 0.0.0.0:1601 *:* UDP 0.0.0.0:1701 *:* UDP 0.0.0.0:3320 *:* UDP 0.0.0.0:3527 *:* UDP 0.0.0.0:4500 *:* UDP 127.0.0.1:123 *:* UDP 127.0.0.1:1033 *:* UDP 127.0.0.1:1036 *:* UDP 127.0.0.1:1037 *:* UDP 127.0.0.1:1900 *:* UDP 127.0.0.1:3514 *:* UDP 192.168.0.12:123 *:* UDP 192.168.0.12:137 *:* UDP 192.168.0.12:138 *:* UDP 192.168.0.12:520 *:* UDP 192.168.0.12:1900 *:* And the Windows Firewall has an exception for "File and Printer Sharing". By default this is set up to listen on the local subnet only. As you can see, the NetBIOS ports (137-139) are only listening on the local subnet, which is fine, but the SMB port, 445, is listening on the 0.0.0.0 subnet, which is not desirable. I, eventually, after buggering about for far too long, just changed the scope for port 445 in the firewall to "All networks" (or whatever it is) which now lets me in via SMB. For obvious security reasons I would prefer to change the listening app to listen on the local subnet ONLY. I'm currently using a wireless adapter, so I'm not overly happy with all and sundry being able to access 445. Of course, the WiFi connection is encrypted with WPA2/AES and is behind a router firewall, but still... sometimes it isn't as I move around. Googled, but no help. TIA, Ken. Tag: XP Vista see each other but cannot connect Tag: 287084
  - 22
    - Wol question? I have 4 Windows XP Pro systems operating on a LAN. Three of these computers I start up remotely using the Run command "mc-wol Mac address". Is it possible to somehow automate this process by creating 3 seperate short cuts, one for each computer, that would simply this start up process? Suggestions greatly appreciated. Tag: XP Vista see each other but cannot connect Tag: 287082
  - 23
    - HP printer is wireless, what can it do? The small network here has a wired Linksys router, two PC's (Win-XP-pro), one wired print server (for a laser printer w/parallel port), and an HP7410 printer (with a network interface card) that is connected by cable to the local ethernet/LAN. This HP also has a "wireless" capability, a small blue icon stays lighted on front. Would greatly appreciate some insights for these (obviously) elementary questions... a) Is the wireless feature primarily ONLY for, let's say, a laptop to print wirelessly to this HP Printer, or just to clean up wires in the office? b) Is it true it can't be BOTH connected by wire and at the same time have wireless capability? That is... since it's connected by cable (presumably the HP's wireless is presently disabled), then is it true that I'd need to first DISCONNECT it from cable, then re-configure for 'wireless' by filling in the wireless settings on HP... which would mean now ONLY the laptop can connect and the PC's can't (unless I added a wireless-access-point (WAP) to the router, so ALL PC's could sent thru wireless into the printer, right?) c) Is it true this wireless HP device only really "receives" signals (things to be printed), or is it possible (or worse, "certain") that it could be used for someone outside home to "get into" my entire network (far beyond just printing)? Is this likely? (Right now, I assume wireless is disabled...but if it isn't, I noticed some settings that said "open" "no security/authentication". But it also said "Connected: No". d) Can the HP printer act as a (and be my) WAP and eliminate the need for me to buy a separate WAP? Is this commonly done? Any advantages/disadvantages? e) Is it true that the wired connection now in use (HP is plugged into router) would almost for certain be the fastest, and that if I re-configured everything to use the HP printer's 801.11b wireless connection along with a (newly installed) 801.11 b/g WAP...the connection would likely or for sure be noticeably slower? f) Any way to keep the fast wired-connection to the HP printer, yet at same time allow it to 'accept' a wireless signal from a laptop, so that laptop can print (thru the air so to speak) to the printer? (Sort of best of both worlds... fast wired connection for desktop PC's, plus convenience of wireless for laptop remote printing) g) anything else I'm missing here, that I should know about regarding wireless printing, networks, etc. Thanks, greatly appreciatd, George Tag: XP Vista see each other but cannot connect Tag: 287069
  - 24
    - Cannot see wireless machines I have a small network with a Vista Ultimate machine plus a few XP Pro SP2 machines that are all connected to a router that has wireless and wired access. In all cases, I can see the wired machines from all machines, even from those connected via wireless. I cannot see the wireless machines from anywhere. My guess was that a software firewall was blocking access over that connection, but I turned everything off and it had no effect. Even thou I cannot see a wireless machine from a wired machine. I can ping its ip address. Any suggestions? Thanks Tag: XP Vista see each other but cannot connect Tag: 287061
  - 25
    - basic need-to-know on buying/setting-up wireless Hello, Am using WinXP-pro on 2 PC's (want to do remote access later, too), got one wired-router, 2-PC's, in small 3-story house, in suburbs, not much traffic here. Trying to set up very basic wireless access (for future laptop, and small Wii in house), without spending lots of time or becoming expert, would greatly appreciate some advice in these below general areas, thanks... 1) WAP or Wireless Router? Already have a Linksys VPN router (works great, already set up, although don't use the VPN part yet). Looks like wireless access points (WAP's, $69) are MORE expensive than entirely new wireless router (sale $43). -Can/should I get the wireless ROUTER and just use it like a WAP... i.e. just use it for wireless access and skip all the router stuff. Can I do that? Is it easy to set up (just wireless, no router)? -Would I HAVE to throw out existing router and start over? -Is there some great benefit to paying extra and getting just the WAP (no built-in router) and attaching it to my router? 2) Which device? Looks like the Linksys WRT54G is good all around. It handles wireless-B too. -Is there any GREAT reason to pay much more (~$70) and get speed booster for 35% more speed. -At $43, seems I could always get a few years out of it and start over later if speed is a real issue, besides better deals/standards likely on market by then anyway, right? 3) Security... -How secure are these local wireless networks? Everyone says set up a password. Are there some basic things everybody sets up to be very secure? -Is the biggest risk a neighbor or drive-by connection? Is that really hard, or really easy? So what if they use my always-on connection, flat fee. -Or is the risk of an unauthorize sign-on that they could browse files and/or remote-control and damage my PC (a big deal). 4) Anything else in the really need to know or do category? Thanks for any basic suggestions, insights, advice, George Tag: XP Vista see each other but cannot connect Tag: 287060
- Next
  - 1
    - MTU Problem Check this one out, hopefully someone has some ideas on this... I have a bunch of XP Pro machines in one office where I had to lower the MTU setting to 1362 to allow traffic to work across a hardware VPN to the main office. The correct MTU size was determined by finding the max size packet that worked and then subtracting 10 (so in this case, 1372 was the largest size packet that would work). Anyway, this was working fine for all of the computers for months. All of a sudden, one computer quit working and it is displaying a very strange behavior... With the 1362 MTU size set, all of a sudden the largest packet that would go through from this PC only was 1334, so I lowered the MTU down to 1324. Reboot, and then the largest packet that would go through is 1282, so I lowered the MTU to 1272 and rebooted. This goes on and on -- you enable the correct setting, reboot, and then you have to go lower again. It literally never ends. I think that the registry has been tampered with as someone had set the TCP Receive Window setting to 1100. I tried setting it back to 64512, and even reset TCP/IP back to defaults with the guided help from this article: http://support.microsoft.com/kb/299357 After resetting TCP/IP, the TCP Receive Window setting is fine, but I still am running into the same MTU issue. I do believe it is something whacked with this particular machine. Has anyone seen this before or have any ideas? Thanks, Chris Tag: XP Vista see each other but cannot connect Tag: 287055
  - 2
    - File sharing I know this topic has come up repeatedly and I have tried almost everything in every article and I am stumped. Please throw some suggestions. I have three computers running windows xp pro. Computer A is the problem. Computers B and C seem to be okay. Heres what happens. B and C can see each other and do file sharing. B and C can see A, but they both get accessiblity error messages when they try to browse A. Computer A can see and read and write to B and C. Computer A has two printers that are shared, but B and C can't access them (they don't show up when I try to add a network printer) All computers are running simple file sharing behind a broadband router so they all have private IP addresses. I have tried with the windows firewall on and off. No other firewall software is being used. I have CA antivirus and antispam running, but I have uninstalled and tried. All three shared computers have simple names like "chris" or "desktop" This all used to work and that it stopped, but I'm not sure when because I don't often print or file share from computer's B and C. I have also connected other computers that I am troubleshooting for people and they also can't access computer A, but they can always see it in the workgroup computer list. If you reply to my email remove the word "block", but I would prefer you reply here. Thanks in advance. Tag: XP Vista see each other but cannot connect Tag: 287054
  - 3
    - Disappearing server shares on specific XP/Office2007 client I'm running a Windows 2000 server SP4 with all the latest fixes. This server is sharing files and printers. The clients are all Windows XP Professional SP2 (dutch language) with the applicable patches installed. The problem seems to specifically haunt laptop computers that also have the new Office 2007 (also patched to Microsoft standards) installed. The clients log in, and have normal access to all the shares on the servers. The server keeps it's shares up and running (none of the clients with desktops or even laptops with no Office 2007 installed have the issue to my knowledge), but atleast two machines somehow 'loose' the ability to review shares on the server. I do have a few more machines with the XP/Office 2007 configuration I have not heard any problems from, but then again, that might just be a matter of time. Opening the UNC path to the server yields just one or two shared folders, and the contents of these folders are usually empty. Accessing a missing share or printer through the UNC path directly gives the notification that the share cannot be found of contacted. All the printers and the rest of the shares are just gone on the workstation. Going to a different workstation shows the shares and printers to be available, so it can't be a problem on the server-side. This is further staved by the fact that as the Windows XP client that has the issue reboots, all the shares and printers are back up as normal again, as if they never were gone to begin with. It's quite annoying because it removes the ability of the user to access network items, aswell as utilize network printers. I'm a bit at a loss as to what may be causing this, and thus would like to submit this thread to see if anyone could toss up some idea's of what might be going on. Tag: XP Vista see each other but cannot connect Tag: 287052
  - 4
    - Internet Connection Icon for Taskbar Where do I find the 'internet', not the local area connection, icon for the taskbar. Had it there once (shows connectivity), but took it off and now can't find where it was. Tnx... Tag: XP Vista see each other but cannot connect Tag: 287048
  - 5
    - IMPOSSIBLE Networking with XP I've got three computers hooked up to a network: First, a WinXP and a Win2000 computer both connected to the router via wired LAN. Then there's also a WinXP laptop connected via WiFi. I'm using a Linksys wireless router WRT150N. Internet access for all machines is fast and flawless. But file transfers are impossible between any of the machines, regardless of file size. I can do a directory view of any networked files, which usually gets me a few seconds delay and an hourglass, but any attempt at any file transfer gets me an hourglass that won't go away ever. Sometimes on the XP machines I'll see a frustrating crash of Windows Explorer (Win2000 never crashes, by God!). This occurs even when all firewalls are disabled. Each machine can ping the other. I don't have a clue as to what is going on here. I can browse other networked computer's files, but I can't access the files. I'm at my wits end. ANY help or debug ideas would be lovely. Thanks for taking the time. AAAHHH!!! Tag: XP Vista see each other but cannot connect Tag: 287044
  - 6
    - Do I need NETBIOS and the LMHOSTS file? I've got a home network, a WinXP and a Win2000 computer connected via wired LAN, and a WinXP laptop connected via WiFi. I'm using a Linksys WRT150N router. All I need are internet access for all computers (I'm using Comcast), and file/printer sharing between all computers. For all computers, in my Advanced TCP/IP Settings, do I need to have Enable NetBIOS over TCP/IP? Or should it be disabled? Or use the Default option of Use NetBIOS setting from the DHCP server? Also, do I need to Enable LMHOSTS lookup? Thanks!!! Tag: XP Vista see each other but cannot connect Tag: 287036
  - 7
    - File and Print Sharing is always disabled Here is something I've not seen on any of my XP machines before: My new XP SP2 notebook boots up with FPS unchecked. I have to go in every time and re-check it, and it works just fine. How do I get this thing to stay checked????? Thx Jeff Tag: XP Vista see each other but cannot connect Tag: 287034
  - 8
    - Slow network traffic We are having slow network traffic on all xp-clients in our network. (2dc w2k3 - 1 exchange server - > 125 clients all windows xp pro sp 2). The 4 vista clients do not have this problem. We have tested the network speed between 2 remote locations (fiber connection) and the speed is about 95 Mbps. Anyone any idea ? Grtz Stef Tag: XP Vista see each other but cannot connect Tag: 287030
  - 9
    - What hardware do I need for this netork? Hi, We will have 10 XP Home PCs and a network printer at work. Currently, we just have a 6 port switch where 5 PCs connect to one that acts as the gateway for the internet and the printer. The broadband is BT Business ADSL. What I want to do is have a wireless router so our 2 laptops can connect as well. Am I right to assume that if I buy an ADSL Wireless 4 port Router, I can connect 3 PCs directly to the router and the other port can be connected to the 6 port switch? I am a bit of a novice when it comes to switches and routers. If you can recommend a plan then that would be fantastic. We want to keep costs down as well which is why we are sticking with XP Home and not getting a server. Thanks for your attention and any advice you can give me. Kindest regards, David Tag: XP Vista see each other but cannot connect Tag: 287029
  - 10
    - Share on floppy drive disappears Hi everyone, on a win xp pro notebook i share (as local admin) the floppy drive as a$. After a while the share just disappears! All other shares are still there. Has anyone an idea how to fix this? best regards Tag: XP Vista see each other but cannot connect Tag: 287028
  - 11
    - hii am geethu hii am geethu you chatting with me *********************************** http://myprofile22.blogspot.com ************************************ user name;bavanikumar22@gmail.com *********************************************** sometimeswe thinkof whyfriendskeep forwardingmail to us with out writing asingle word........... maybe thiscouldexplainwhy........... Tag: XP Vista see each other but cannot connect Tag: 287027
  - 12
    - One site always opens pop-ups Even though there is an entry in the HOSTS file, there is one pop-up that cannot be stopped: b.casalemedia.com. These pop up at random in links within certain websites. One example: www.indianexpress.com How does one get rid of this? Regards and TIA. Avatar ------- Tag: XP Vista see each other but cannot connect Tag: 287026
  - 13
    - How do I get 2 XPs w/ a crossover to communicate? I set both up on the same domain name and different static IP addresses. They are able to say the LAN is connected, but I cannot exchange any data between them. I tried pinging, but each ones' other would time out. What I have set up currently is: | "Local Area Connection Properties" | -> "Internet Protocol (TCP/IP)" -> "Properties" | -> -> "Use the following IP address:" | -> -> -> IP addr. and subnet mask set, but not gateway | -> -> "Use the following DNS server addresses:" | -> -> -> None are set If any steps are needed, (like setting up one XP to be a DHCP or DNS,) please provide help for me. Thanks -Adam E Tag: XP Vista see each other but cannot connect Tag: 287020
  - 14
    - How do I get 2 XPs w/ a crossover to communicate? I set both up on the same domain name and different static IP addresses. They are able to say the LAN is connected, but I cannot exchange any data between them. I tried pinging, but each ones' other would time out. What I have set up currently is: | "Local Area Connection Properties" | -> "Internet Protocol (TCP/IP)" -> "Properties" | -> -> "Use the following IP address:" | -> -> -> IP addr. and subnet mask set, but not gateway | -> -> "Use the following DNS server addresses:" | -> -> -> None are set If any steps are needed, (like setting up one XP to be a DHCP or DNS,) please provide help for me. Thanks -Adam E Tag: XP Vista see each other but cannot connect Tag: 287019
  - 15
    - How to setup home network for Windows 2000 and Windows XP? Hi, there: My home network has a wireless router, a Windows 2000 machine and a laptop running Windows XP. These machine are all configured as one workgroup. From the XP, the W2000's name is shown, but cannot be accessed, it say's cannot find the path. From the W2000, only itself's name shown, it cannot see the XP. I tried to us XP Home's CD to configue the W2000's home network, but the XP CD say's this method only for W98. I have no idea how to make the home network working. Any help would be appreciated. gz Tag: XP Vista see each other but cannot connect Tag: 287018
  - 16
    - XP Home CD destroyed my computer? To setup a home network, I setup an XP computer first (by running the network setup wizard) and then put an XP home CD to a computer running windows 2000, then the windows 2000 computer seem dead locked. I forced the windows 2000 to shutdown, and then no mater what I did, the windows 2000 computer never boot again. What happened? Please help! Tag: XP Vista see each other but cannot connect Tag: 287016
  - 17
    - Browser page loads, Protocal activity Blocking page loads for ads stalls XP page loads but not in W98. What is different in XP that keeps asking for the protocols? Tag: XP Vista see each other but cannot connect Tag: 287008
  - 18
    - brief IP address question (quiz?) Hello, An using an Win XP-pro computer and was looking at some internet connection things. Could I get a few opinions on IP addresses in general, particularly the last set of digits... BACKGROUND PC I did c:\ipconfig, and it brings something back like... IP Address 190.188.1.400 Default gateway 190.188.1.4 ROUTER The router has some settings where it has a fill-in box (default=0) to allow you to ONLY fill in the last 2 digits, like this 190.188.1.4 [ 0 ] (it has a default of 0) QUESTIONS OK so questions are... Is the router IP address of 190.188.1.4 the same as 190.188.1.40? _________ the same as 190.188.1.400? _________ the same as 190.188.1.004? _________ And, when the "ipconfi" brings back 190.188.1.400, is that the same as 190.188.1.40? _________ the same as 190.188.1.4? _________ the same as 190.188.1.004? _________ And, is the default gateways always the same (or a variation of ) the OP address, i.e. is the default gateway of 190.188.1.4 the same as 190.188.1.400? ___ (if so, why don't they put the 2 zero's here too?) ____ Thanks, George Tag: XP Vista see each other but cannot connect Tag: 287003
  - 19
    - Remote Desktop locks up local computer I am running RDP on my local XP pro machine (box 1). I connect to it by running the remote desktop client on another XP pro machine (box 2) on my LAN. Most of the time when I log off the remote session I cannot access box 1 from the keyboard, and the screen is blank. CNTL, ATL, DEL does not return the login prompt. So far, the only solution I have been able to do is shut down the computer and restart it. Are there any suggestions I can try to correct this problem? Thanks, Jim Tag: XP Vista see each other but cannot connect Tag: 287002
  - 20
    - Problem with IE 7 Settings using GPO Hi I am trying to set proxy setting in IE 7, using a GPO. I tryed to install the Administrative Templates for Internet Explorer 7 for Windows om my DC. And then made a GPO. Then settings are only applyed on pc's with IE 6, why is that? Tag: XP Vista see each other but cannot connect Tag: 287000
  - 21
    - IE7 Setup Issue Hello, I'm trying to set up a PC with Windows XP Professional and I tried to install IE7 on it. It installed fine, but when I click on the IE7 icon (after reboot) I can't access the internet at all. The browser never opens. I have a laptop running Windows XP Pro and it works just fine. However, my desktop cannot seem to run IE7 for some reason. Tag: XP Vista see each other but cannot connect Tag: 286999
  - 22
    - PPP LCP Failure Wondering if anyone has seen this error before. Trying to do a remote vpn and LCP Configuration Ack does not seem to make it to PPP procotol module. Do not see the expected LCP Configuration Reject being sent out by my Windows PC No. Time Source Destination Protocol Info 2 0.043531 172.31.128.101 69.28.109.6 TCP abbaccuray > pptp [SYN] Seq=0 Win=65535 Len=0 MSS=1260 3 0.072123 69.28.109.6 172.31.128.101 TCP pptp > abbaccuray [SYN, ACK] Seq=0 Ack=1 Win=16384 Len=0 MSS=1260 4 0.072325 172.31.128.101 69.28.109.6 PPTP Start-Control-Connection-Request 5 0.105621 69.28.109.6 172.31.128.101 PPTP Start-Control-Connection-Reply 6 0.105805 172.31.128.101 69.28.109.6 PPTP Outgoing-Call-Request 7 0.141172 69.28.109.6 172.31.128.101 PPTP Outgoing-Call-Reply 8 0.153732 172.31.128.101 69.28.109.6 PPTP Set-Link-Info 9 0.161355 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 10 0.192301 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 11 0.192980 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 12 0.374693 69.28.109.6 172.31.128.101 TCP pptp > abbaccuray [ACK] Seq=189 Ack=349 Win=65187 Len=0 18 2.158080 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 19 2.187140 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 20 2.188008 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 21 5.157873 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 22 5.194315 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 23 5.196655 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 24 9.157625 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 25 9.187456 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 26 9.188081 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 27 13.157421 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 28 13.187020 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 29 13.187604 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 32 17.157088 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 33 17.187017 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 34 17.187637 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 35 21.156816 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 36 21.186313 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 37 21.186921 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 44 25.169259 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 45 25.186137 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 46 25.198339 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 49 29.156329 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 50 29.185440 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 51 29.186276 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 52 33.156013 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 53 33.185937 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 54 33.186540 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 55 37.155785 172.31.128.101 69.28.109.6 PPTP Call-Clear-Request 56 37.192656 69.28.109.6 172.31.128.101 PPTP Call-Clear-Request 57 37.192782 172.31.128.101 69.28.109.6 PPTP Call-Disconnect-Notify 58 37.224889 69.28.109.6 172.31.128.101 TCP pptp > abbaccuray [ACK] Seq=205 Ack=513 Win=65023 Len=0 59 37.225069 172.31.128.101 69.28.109.6 PPTP Stop-Control-Connection-Request 60 37.252977 69.28.109.6 172.31.128.101 PPTP Stop-Control-Connection-Reply 61 37.291536 172.31.128.101 69.28.109.6 TCP abbaccuray > pptp [FIN, ACK] Seq=529 Ack=221 Win=65315 Len=0 62 37.319252 69.28.109.6 172.31.128.101 TCP pptp > abbaccuray [FIN, ACK] Seq=221 Ack=530 Win=65007 Len=0 63 37.319419 172.31.128.101 69.28.109.6 TCP abbaccuray > pptp [ACK] Seq=530 Ack=222 Wi Tag: XP Vista see each other but cannot connect Tag: 286997
  - 23
    - Protecting shared files on XP SP2 home Well, I know it *supposedly* can't be done with a password, but I've heard of ways to do it and I was wondering if anyone could give me some ideas. Basically, there's one computer I want to be able to access the files. It's OS X Tiger, and will always have the same IP address. All other computers When I mount a share, it asks for a password, but, like I believe all XP systems are, any password will open the files. So I just need anything to keep access to that one computer. I've heard about setting a password on the guest account, but that doesn't seem possible. Also tried making a rule on my router's firewall, but that didn't work. Is there any way to set up the Windows Firewall for this? Any suggestions would be appreciated! Thanks, frosty Tag: XP Vista see each other but cannot connect Tag: 286996
  - 24
    - My wireless usb card lost in network connections but it works *hi,recently i installed ufasoft sniffer to my computer,and while i was struggling with the software, suddenly my notebook was restarted,and it turned on again,but when i open network connections i cannot see my wireless philips usb, it disappeared,but it is shown in device manager,and it works. i installed its own software so it works,but i don't want to use that software,i want to use original xp wireless system, because with its own software i cannot change my ip, i couldn't understand anything,my pc is connected to internet but there is no proof of it :( please help mee...* Tag: XP Vista see each other but cannot connect Tag: 286993
  - 25
    - Use a Server or one of my Pc's Hi I have 3 PC's that are already Share a internet connection running XP Pro. One of the PC's has an accounts program called TAS Books installed. We want one of the other PC's to run TAS Books as well so that 2 people can work on the program at the same time. Will it be easier to buy a server? Would i need to install Windows server 2003? If so what PC's would need windows server on? Or can i use the third PC as the server? Thanks in advance Glenn -- pele35uk Tag: XP Vista see each other but cannot connect Tag: 286989

I have 2 workgroup computers. One runs XP Media Center Edition and the other
is running Vista Home Premium. I have placed both computer in the same
workgroup and both of the machines see each other in the network
views/network map. However, when I double click each machine from the other
in the network view, access is denied. I have installed the Link Layer
Topology Discovery on both machines and have verified that the related
services are started for networking. On the Vista machine I have enabled
private network. When I try to connect using UNC, it gives me access denied
both ways. I have created a shared folder on both machines. My goal is to
be able to install an accounting software server version on the XP machine
and a client for the software on the Vista machine. I disabled both
firewalls and even tried enabling them and tweaking the vista exception list
with no luck. Please help.
--
Kevin

Top

Re: XP Vista see each other but cannot connect by Jack

Jack
Wed Mar 26 15:11:06 PDT 2008

Hi
Successful Sharing involves some general consideration in Network settings,
http://www.ezlan.net/sharing.html
As well as specific adjustment of each computer according to what it is
allowed to be shared.
Vista File and Printer Sharing-
http://www.microsoft.com/technet/network/evaluate/vista_fp.mspx
Windows XP File Sharing -
http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Printer Sharing XP -
http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx
Windows Native Firewall setting for Sharing XP -
http://support.microsoft.com/kb/875357
Windows XP patch for Sharing with Vista -
http://support.microsoft.com/kb/922120
Jack (MVP-Networking).

"KevinatPMHospital" <KevinatPMHospital@discussions.microsoft.com> wrote in
message news:2618C6D7-E870-4A91-8510-5EA9665DFCCA@microsoft.com...
>I have 2 workgroup computers. One runs XP Media Center Edition and the
>other
> is running Vista Home Premium. I have placed both computer in the same
> workgroup and both of the machines see each other in the network
> views/network map. However, when I double click each machine from the
> other
> in the network view, access is denied. I have installed the Link Layer
> Topology Discovery on both machines and have verified that the related
> services are started for networking. On the Vista machine I have enabled
> private network. When I try to connect using UNC, it gives me access
> denied
> both ways. I have created a shared folder on both machines. My goal is
> to
> be able to install an accounting software server version on the XP machine
> and a client for the software on the Vista machine. I disabled both
> firewalls and even tried enabling them and tweaking the vista exception
> list
> with no luck. Please help.
> --
> Kevin

Top