Web Sites not Loading

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - not displaying page I have three computers connected to the same network. Every so often, on the laptop, I get the error message "Internet Explorer cannot display the webpage ?.." and a similar one if using Mozilla. It?s still got the internet connection ? emails are coming in. But I have to shut it down and reboot and then it?s fine for half an hour or so and then does it again. I?ve tried deleting browsing history and files and cookies, I?ve tried resetting the modem and I?ve disconnected the firewall. OS is XP, The router is Netgear RangeMax Tag: Web Sites not Loading Tag: 288542
  - 2
    - winxp_pro and sp3 Remote Desktop switches It appears that the /console switch no longer functions. Anyone else have that trouble? Thanks Tag: Web Sites not Loading Tag: 288537
  - 3
    - Frequent Network Drops Hi; I support a LAN with approx 25 WinXP Pro SP2 clients and 2 Windows 2003 SP2 servers. The servers are connected via GB and all workstations via 100Mbps. I have 2 Dell OptiPlex 745 XPPro SP2 machines that experience network drops quite frequently, sometimes up to 4 times/hour. They lose their connection to a mapped drive and are unable to ping either server when this happens. The connection is usually restored within about 30 seconds. I've tried different nics, updating nic drivers, swapping patch cables, changing ports on the switch, even changing the 48+2 port switch without success so far. Could this be a cabling issue between these two machines? Any good network diag tools I could run on these machines to track down this issue? Thanks Hemmy Tag: Web Sites not Loading Tag: 288536
  - 4
    - re create shared documents folder I have just attempted to set up a home network and found that my laptop has no shared documents folder. Can I recreate the folder without having to do a full restore? The laptop works fine in all other respects running office and 3rd party applications. Just no Shared Documents folder. Tag: Web Sites not Loading Tag: 288531
  - 5
    - FREE Tutorials on HTML XHTML CSS JavaScript XML XSL ASP SQL ADO FREE Tutorials on HTML XHTML CSS JavaScript XML XSL ASP SQL ADO VBScript, SAP - ABAP visit ebooks.univdatabase.com Tag: Web Sites not Loading Tag: 288527
  - 6
    - Sharing files and printers I am having problems sharing files and printers on my home wireless network. The server can ping the client and can access the shared documents folder and printers on the client. However, the client cannot ping the server nor access shared documents or printers on the server. Server is running XP Professional 2002 SP2. Client is running XP Home 2002 SP2. Problem began when I replaced the server with a new computer. The old server (XP Home) worked fine. Both computers can access the internet with no problems via a Linksys router and cable modem. The server connects directly to the modem, while the client connects via wireless. Here are the server results from ipconfig, netconfig, and browstat: Windows IP Configuration Host Name . . . . . . . . . . . . : FreschlFamily1 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : hsd1.ca.comcast.net. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. Description . . . . . . . . . . . : Intel(R) 82562V-2 10/100 Network Connection Physical Address. . . . . . . . . : 00-1D-09-90-72-54 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 68.87.76.178 68.87.78.130 Lease Obtained. . . . . . . . . . : Monday, May 26, 2008 2:32:42 PM Lease Expires . . . . . . . . . . : Tuesday, May 27, 2008 2:32:42 PM Server Name \\FRESCHLFAMILY1 Server Comment 75X21G1 Software version Windows 2002 Server is active on NetbiosSmb (000000000000) NetBT_Tcpip_{96E791A2-EBE6-41C7-AF15-A60435D93D97} (001d09907254) Server hidden No Maximum Logged On Users 10 Maximum open files per session 16384 Idle session time (min) 15 The command completed successfully. Computer name \\FRESCHLFAMILY1 Full Computer name FreschlFamily1 User name Dad Workstation active on NetbiosSmb (000000000000) NetBT_Tcpip_{96E791A2-EBE6-41C7-AF15-A60435D93D97} (001D09907254) Software version Windows 2002 Workstation domain WORKGROUP Workstation Domain DNS Name (null) Logon domain FRESCHLFAMILY1 COM Open Timeout (sec) 0 COM Send Count (byte) 16 COM Send Timeout (msec) 250 The command completed successfully. Status for domain WORKGROUP on transport \Device\NetBT_Tcpip_{96E791A2-EBE6-41C7-AF15-A60435D93D97} Browsing is active on domain. Master browser name is: FRESCHLFAMILY1 Master browser is running build 2600 1 backup servers retrieved from master FRESCHLFAMILY1 \\FRESCHLFAMILY1 There are 1 servers in domain WORKGROUP on transport \Device\NetBT_Tcpip_{96E791A2-EBE6-41C7-AF15-A60435D93D97} There are 1 domains in domain WORKGROUP on transport \Device\NetBT_Tcpip_{96E791A2-EBE6-41C7-AF15-A60435D93D97} Here is the data for the client: Windows IP Configuration Host Name . . . . . . . . . . . . : Julie00002 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : hsd1.ca.comcast.net. Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. Description . . . . . . . . . . . : Linksys Wireless-G PCI Adapter with SpeedBooster #2 Physical Address. . . . . . . . . : 00-0F-66-1B-C6-EB Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.101 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 68.87.76.178 68.87.78.130 Lease Obtained. . . . . . . . . . : Monday, May 26, 2008 5:19:57 PM Lease Expires . . . . . . . . . . : Tuesday, May 27, 2008 5:19:57 PM Server Name \\JULIE00002 Server Comment Julie's Computer Software version Windows 2002 Server is active on NetbiosSmb (000000000000) NetBT_Tcpip_{49C95313-5BD6-438F-85C9-2D70E3FAF0F3} (000f661bc6eb) Server hidden No Maximum Logged On Users 5 Maximum open files per session 16384 Idle session time (min) 15 The command completed successfully. Computer name \\JULIE00002 Full Computer name Julie00002 User name Julie Workstation active on NetbiosSmb (000000000000) NetBT_Tcpip_{49C95313-5BD6-438F-85C9-2D70E3FAF0F3} (000F661BC6EB) Software version Windows 2002 Workstation domain WORKGROUP Workstation Domain DNS Name (null) Logon domain JULIE00002 COM Open Timeout (sec) 0 COM Send Count (byte) 16 COM Send Timeout (msec) 250 The command completed successfully. Status for domain WORKGROUP on transport \Device\NetBT_Tcpip_{49C95313-5BD6-438F-85C9-2D70E3FAF0F3} Browsing is active on domain. Master browser name is: JULIE00002 Master browser is running build 2600 1 backup servers retrieved from master JULIE00002 \\JULIE00002 There are 2 servers in domain WORKGROUP on transport \Device\NetBT_Tcpip_{49C95313-5BD6-438F-85C9-2D70E3FAF0F3} There are 1 domains in domain WORKGROUP on transport \Device\NetBT_Tcpip_{49C95313-5BD6-438F-85C9-2D70E3FAF0F3} Any help with this issue would be greatly appreciated. Tag: Web Sites not Loading Tag: 288526
  - 7
    - Assigning network adapters I'd like to assign my Outlook program and printers to use a wired 10/100 network adapter and access the internet thru my wireless adapter. Each one is connected to a different provider. Is this possible? Tag: Web Sites not Loading Tag: 288525
  - 8
    - Is ICS my only option ? Dear network experts. Hopefully someone can offer some solutions. Current network - Wireless router using 172.16.0.x range for my network. I have a XP MCE pc connecting to the internet using a wireless NIC PCI card. Connected to the LAN port of this MCE pc is a Sony PS2 console and I have enabled ICS on the MCE pc. Thus the MCE's LAN port becomes 192.168.0.1 and the PS2 is set to DHCP. With this configuration I am able to play online games on my PS2 utilising the MCE wireless connection to the router. My desire is to connect a 2nd PS2 to the router and play the 2 PS2s against each other. My problem is - because the 1st PS2 is behind ICS on 192.168.0.x I can't ping it from my 172.16 network and therefore I doubt the 2 PS2s will see each other. What changes do I need to make to get the 2 PS2s talking when 1 of them is going through my XPMCE pc ? Can I simply ditch ICS and just bridge MCE's wireless and LAN ports and then set the MCE PS2 to a 172.16.0.x IP ? How is bridging different to ICS'ing ? Thankyou very much. Regards Scott Tag: Web Sites not Loading Tag: 288505
  - 9
    - Winsock Issues: Is this the appropriate place to post? DFXHHQ38 Hello, I am in desperate need of some help. I am in the UK and have recently changed my ISP from Virgin to Sky. Apart from the atrocious and pathetic service offered by Sky to me, I have discovered that my internet connectivity is down because of a Winsock error. The diagnostic program Netdiag is so unreliable that although it first notified me that the error was due to an LSP in the Winsock, it has never notified me since I deleted the Registry entry and the Program folder entry about the error ever again. Instead the Netdiag tells me that it cannot connect to the internet because the http, https and ftp ports are blocked by a firewall which is wrong because I turned the firewall off (rendering myself vulnerable) only so I could connect to the internet. After trial and error connections on many occasions I saw the Microsoft support page http://technet.microsoft.com/en-us/library/bb457156.aspx This advised typing â??netsh Winsock reset catalogâ?? in front of the C prompt. Although I have restarted the computer on a number of occasions, doing that has not restored connectivity even though the Winsock has been reset according to the computer. I only manage to connect to the internet by trial and error after many messages that the problem may instead be in the modem and to turn the modem off and on and then to contact my ISP which is pointless because as I mentioned above Sky broadband hardly ever respond. I tried another ISP and the computer connected without any hassle so the problem is with the ISP although I just want to make sure before I take the rogues at Sky broadband to court. Does anyone please know what to do about the Winsock error other than spending another 100/- and reinstalling windows and losing data just because Sky Broadband is a third-rate ISP? I also have received information that this is a Registry error but again am not sure how to ascertain or remedy that. I await your kind response. Tag: Web Sites not Loading Tag: 288504
  - 10
    - Access to LAN, No access to Internet I have a wired home network and DSL. DSL modem, D-Link router/hub, 4 desktop computers (2 with XP SP2 and 2 with XP SP3). Everything worked fine last night. This morning, all the computers except one work fine. The dysfunctional computer (Dell 1100 with SP3) cannot connect to the internet now, though it can still connect with the other computers on the LAN and the other computers can connect to it. This is just the opposite of any network problems I have ever experienced, since it is usually trying to connect to other computers that is problematic, not to the internet. I have checked all the connections, restarted the computer, uninstalled and reinstalled the network card driver, ran the network connection wizard again, ran LSPfix (no problems found), totally turned off all of Norton 360's firewall, autoprotect etc., and have now hooked up my laptop to the LAN cable that was running to the problem PC, and can connect to the internet just fine on it (I am on the laptop writing this now). A couple of other oddities that someone may be able to connect all the dots together and know what the problem is. I cannot access the router via Internet Explorer nor ping it from a command window from the problem PC, and even though I can access all the other PC's via Windows Explorer (I even copied files between them to make sure), I cannot ping any of them either. I tried doing a system restore to yesterday, even though I have made no changes to the system in a while now, and it failed. I believe this is due to having the Truecrypt encryption program on 2 of the 3 partitions of the hard drive, though not on C:\ where the operating system is. I think I found out a long while ago that system restores always failed when Truecrypt was encrypting any partitions on a drive at startup, even if the one the operating system was on was not. I am not an expert, but not a novice either, and this is way to confusing for me. Any thoughts would be appreciated. Tag: Web Sites not Loading Tag: 288499
  - 11
    - VPN signon keeps popping up while using internet - XP & Despite what browser you are using, you need to start IE and go to Tools - Internet options - Connections. Propably "Always dial my default connection" will be marked, the connection being your VPN. Change this to "never dial a connection". Problem solved. Have fun. Tag: Web Sites not Loading Tag: 288493
  - 12
    - VPN signon keeps popping up while using internet Despite what browser you are using, you need to start IE and go to Tools - Internet options - Connections. Propably "Always dial my default connection" will be marked, the connection being your VPN. Change this to "never dial a connection". Problem solved. Have fun. Tag: Web Sites not Loading Tag: 288492
  - 13
    - Maximum number of connections to an access point Someone knows which is the maximum number of connections to an access point, from xp computers with wireless adapters. Regards Ricardo Francisco Tag: Web Sites not Loading Tag: 288489
  - 14
    - Can XP perform redundancy function? I get 2 PCs with XP for file sharing, and I would like to perform redundancy function, if anyone of PCs break down, does anyone have any suggestions on whether XP can do it or not? Thanks in advance for any suggestions Eric Tag: Web Sites not Loading Tag: 288484
  - 15
    - Home Network Problem-One wired computer & one wireless computer I have one computer running Windows XP Pro that is directly connected to a Linksys wireless router and another computer that is running Windows XP Home and connects using the wireless function. I first set up the XP Pro computer using the Network setup wizard, then the computer that connects wirelessly. Using the Windows XP Pro computer and going to the workgroup I set up, I can see both computers. However, I am unable to add or see the printer that is connected the Windows XP Home computer. Using the Windows XP Home computer, I don't see the Windows XP Pro computer. Any help would be greatly appreciated. Tag: Web Sites not Loading Tag: 288481
  - 16
    - network drives Hello, Is there a way to stop network drives from trying to load while at an offsite location? Everytime my user opens windows explorer it spends time trying to locate the drives. Any help is appreciated. Tag: Web Sites not Loading Tag: 288475
  - 17
    - "drive could not be mapped because no network was found" I'm getting this error trying to access a network share that I created 3 days ago. It worked fine then. Other computers on my network can access the share, except this one, and I just had the machine re imaged 4 days ago. I googled this problem and most people who got this error point to the Windows Workstation service not running. This is not my case. I have verified the service starts automatically and I have rebooted the laptop a cpl of times. Any ideas? Tag: Web Sites not Loading Tag: 288472
  - 18
    - "Add A Printer" Wizard Fails To Find Network Printer 1. The firewalls have been properly enabled. 2. The printer has been shared. 3. The network has a setup disc created and run on both computers. 4. The "add a printer" wizard run. 5. My own printer and the workgroup is displayed, only. Neither "Browse" nor \\computername\printername will connect to the external printer. I am out of all ideas. I have followed all help files and instructions. Nothing works. The wizard just hangs waiting for information. Can anyone offer a suggestion? Tag: Web Sites not Loading Tag: 288463
  - 19
    - hi can u send Tag: Web Sites not Loading Tag: 288456
  - 20
    - Can't see all the XP systems on my network in workgroup I am trying to setup some networking and I can't see all the XP systems in the workgroup. But, the systems that I can't see are in another room. Different subnet, different switch. What ports should I verify that are open to allow the system to access each other ? Thanks Tag: Web Sites not Loading Tag: 288455
  - 21
    - connectivity issues with XP sp3 Hi all I recently updated my 2 pc's to sp3. Using sp2 these pc's worked fine, they connected to the internet via a modem/router (adsl). After installing sp3 my problems began..... I kept getting messages on both pc's saying limited or no connectivity and the adsl modem/router I uise would not establish an adsl link. I have now uninstalled and reinstalled sp3 twice.... each time I uninstall sp3 my connection works fine. Has anyone else come across this problem and manged to fix? Tag: Web Sites not Loading Tag: 288448
  - 22
    - How to change my Logon Domain while connected through VPN I have a laptop running xp pro sp3 and I am working from home but have been able to join my company's domain when connected through VPN (some Juniper web based deal ... not a client). Anyway, the issue is that when I go to login to my PC I can see the corp domain but when I try to login I get The system cannot log you on now because the domain X is not available I KNOW if I drive the 8 hours to the office and jump on the network hard wired it would work but I don't want to have to do that...I really just need to figure out how to change my Logon Domain (keeping in mind that I have to be connected through VPN ... so I guess I'd need a command line trick or something). Below is a section of the results of "net config workstation" Workstation domain CORPNET Workstation Domain DNS Name corpnet.local Logon domain WKS-3WCR9GI I want to be on corpnet domain and I'm almost there. PLEASE HELP! Tag: Web Sites not Loading Tag: 288443
  - 23
    - XP SP3 & Vista Networking Troubles Hi all I updated 2 of my xp computers last night with sp3. Now my vist machine can not see my xp machines. Also the xp machines can see each other but they can not see my vist machine. I am out of ideas on what to try so any help would be goo Tag: Web Sites not Loading Tag: 288438
  - 24
    - Unable to print in a workgroup Hello. I was working on a 2 PC Windows XP Home SP2 workgroup and I was unable to get a shared printer to print from one of the PCs. The PC hosting the printer was an older Dell Dimension desktop which could print without issues, and the other PC in the workgroup was a Dell laptop (Latitude?). The PCs are connected through a Linksys WiFi router (the laptop is wireless, the desktop wired). The printer is set to be shared, and both PCs can access the internet, and ping each other successfully. Running the Add Printer wizard on the laptop at the beginning of all this, and selecting "browse the network for printers" did list the printer share, but when I tried to select the share (or if I tried to enter the \\servername\sharename manually) all that happened is a small dialog box labeled "Connect to compnamehere..." appeared, asking for a password to log onto the desktop PC as "\\compname\Guest". The Guest accounts on both PCs were active, and *as far as I know* had no passwords protecting either one. Needless to say, whenever I tried to enter a blank password, or enter the password "guest" or "Guest", this dialog box errored out with an "access denied" or similar message. Running the Network Setup Wizard on both PCs changed nothing. I changed the desktop PC's computer name and the printer share's name, which did nothing (but see below). I tried to perform "net print \\compname\printershare" from the laptop to the shared printer, and I received this error: "System error 1385 has occurred - Logon failure: the user has not been granted the requested logon type at this computer" or something to that effect. I tried to create a user account with the same name, privileges and password on both PCs to see if that would allow access to the printer share, but no dice. The printer share did not appear in the Add Printer wizard under "browse network for printers" after I changed the desktop PC's "computer name" and the printer share's name, although the computer name did appear. A "net print" from the desktop PC to the laptop worked without any errors. Both PCs are set to use the same workgroup, MSHOME. Finally, I tried to disable the Windows Firewall on both PCs, even though both reported that File and Print Sharing was being allowed through the firewall. Interestingly, on the desktop PC, I was unable to turn off the Windows Firewall through the control panel applet, because the option was greyed out. The only option I could choose was the "Don't allow exceptions" checkbox. At the top of the window, a message read something like this: "Due to security concerns, Windows Firewall is being controlled by group policy". As stated above, both machines have XP Home SP2 (actually, I believe the laptop had XP Media Center, but it definetly had SP2 installed). I was totally unable to access the group policy editor on the desktop (for obvious reasons). Any ideas? Thanks very much in advance for your help. I apologize for the imprecise nature of the above problem description, but unfortunately I don't own the machines in question and I'm not near them. Thanks again and cheers! Tag: Web Sites not Loading Tag: 288437
  - 25
    - Windows XP networks work intermittently I have three computers, one running linux, one dual boots linux and Wndows XP, the the third only runs XP. The windows computer has very poor performance an all networks, including the dial-up connections and 100Mbit ethernet. The USR 56k modials and connects fine, but once connected, it usually will not resolve hostnames on the first try and will connect to the site after several tries. I tried changing DNS servers with no change in the performance. Once connected to the website, downloading starts and stops every few seconds. Sometimes the connection times out, and often I end up with no activity and a blank screen in my browser, most often after clicking on a google search result. I tried the same dial-up connection from Windows on the dual-boot computer and it works fine. The ethernet connection to this computer seems to have the same problem. The connection is slow and intermittent. The other two can communicate at near full speed with no problem. All three are connected to a switch with 100Mbit ethernet. I had ICS on the XP computer and the others configured by DHCP. Can anyone help me diagnose this problem? Tag: Web Sites not Loading Tag: 288436
- Next
  - 1
    - Windows XP performance issue I have a Dell 5150 box that used to have Windows 2000 on it. I recently upgraded to Windows XP and noticed that downloading files from our server is extremly slow. a 2MB file takes about 5 minutes to download to the computer. However, if we upload the 2MB file to the server, it works great. What could be going wrong. When the computer was Windows 2000 we had no speed problems. As soon as we switched the OS, it's very slow. I tried changing the speed and duplex settings on the computer and switch but no combination worked. I even replace the network card and nothing. Any ideas? Thanks, Jasper Tag: Web Sites not Loading Tag: 288424
  - 2
    - ICS host can't access internet After banging my head against the wall for weeks, i've decided to post here in hopes that smarter mind have an answer. my situation: I have one desktop (windows xp pro) that is connected to a dsl internet hookup. i have a laptop (windows xp home) that can currently only get online if i crawl down and hook it to the dsl box with an ethernet cable. my sister has a laptop (windows xp pro) with the same situation. all computers have wireless cards. I would like (love, kill for) to have the desktop share the dsl connection via wireless. so that both laptops and the desktop can all browse the web at the same time. [i'd also like to enable file and printer sharing so that all computers can print from the desktops printer and store file on the desktops hard drive] i have run the connection wizards on the ICS host...but after the lan connection shows as being "connected,shared, firewalled"...the desktop is no longer able to access the internet! at that time the clients are not able to access the internet either. (the wireless network look fine...they all say they are connected...and the shared files are accessible) i have not found any solutions in any troubleshooters or online help pages. i seem to recall having this problem in a windows ME ICS host...i think it had something do do with disabling a service...maybe DCHP? ... i can't recall. I'd just love it if someone could help me fix this. thanks, David Tag: Web Sites not Loading Tag: 288421
  - 3
    - Home network with windows 98SE and XP computers doesn't work Originally I set up a network between a windows 98SE and XP computer and everything worked except I was unable to get printer sharing. Unfortunately, a problem during an unrelated upgrade of XP caused me to resort to a backup clone of the XP operating system (that did not have networking setup). I have been unable to restore a completely working network. I've seen many Win98-XP network problems mentioned on forums (including http://groups.google.com/group/microsoft.public.windowsxp.network_web/browse_thread/thread/53803cadadb55b11/3e595a275207227c?hl=en&lnk=st&q=how+to+home+network+with+xp+and+win98+computers#3e595a275207227c) but I have never seen a problem quite like I have. I've tried many different things but am not able to solve this. Without networking experience, I could use some detailed help. The problem: I have setup one windows 98SE computer (Dell with 128MB ram) and one windows XP computer (Blackbox with 2GB ram) connected via a DSL modem/ Router gateway using ethernet cables. Both computers reach the Internet well. I am able to share 98SE files and folders with the XP (both reading and writing) and have setup a mapped drive for a 98SE shared drive on the XP computer. I can NOT read or write to shared files on the XP computer from the 98SE computer. Both computers show the shared folders under their respective network/workgroup screens. When I attempt to read or map a shared folder from the XP on the 98SE computer, I get an error message. The message reads: "\\BLACKBOX \sharedfolder is not available. There is not enough memory to complete this task. Close some other programs." There are few things running on the 98SE computer and this same computer was able to read/ write to the XP before. Setup for the computers: The 98SE computer uses a Robotics 10/100 PCI NIC TX adapter with: Client for Microsoft Networks Dialup Adapter US Robotics 10/100 PCI MIC TX IPX/SPX compatible protocol -> Dialup Adapter IPX/SPX compatible protocol -> US Robotics 10/100 PCI MIC TX NETBIOS support for IPX/SPX compatible Protocol TCP/IP -> Dialup Adapter TCP/IP -> US Robotics 10/100 PCI MIC TX File and printer sharing for Microsoft Networks The network adapter is bound to the associated IPX/SPX protocol and TCP/IP The XP computer using an Attansic L1 Gigabite Ethernet adapter with: Client for Microsoft Networks File and Printer Sharing for Microsoft Networks QoS Packet Scheduler Internet Protocol (TCP/IP) Summary: Both computers are connected from network interfaces though ethernet connections to a SDL modem/Router. Both computers are connect to the internet and both work with it fine. Both computers have shared folders defined. Both computers "see" the network and both show the correct shared folders for each computer. Both computers are on a workgroup called "Home". I can ping from either computer to the other one correctly. I can write to and read files on the 98SE computer from the XP computer but not the other way around. I have turned off both firewalls from the two computers without an improvement. I have run out of ideas as to how to get this network to work from the win98SE computer. I would appreciate any help or suggestions. Remember, I am not experienced in networking and could use detailed help. Thanks in advance. Tag: Web Sites not Loading Tag: 288417
  - 4
    - Windows AD accounts randomly locking on 1st attempt I have several users that may or may not have an issue when they log into their laptops using their AD accounts. On the first attempt the user will get an error that the password/username they entered is incorrect. On the second attempt they be notified their account is locked. This is not happening for all users, only certain ones at random. I have verified the lockout policy is set for 3 attempts. When i looked at one of the user's security event logs I noticed the following 3 events: Event Type: Failure Audit Event Source: Security Event Category: Logon/Logoff Event ID: 529 Date: 05/20/2008 Time: 6:10:02 AM User: NT AUTHORITY\SYSTEM Computer: LAP-41614 Description: Logon Failure: Reason: Unknown user name or bad password User Name: Smithj Domain: ENTERPRISE Logon Type: 2 Logon Process: Advapi Authentication Package: Negotiate Workstation Name: LAP-41614 Event Type: Failure Audit Event Source: Security Event Category: Logon/Logoff Event ID: 529 Date: 05/20/2008 Time: 6:10:02 AM User: NT AUTHORITY\SYSTEM Computer: LAP-41614 Description: Logon Failure: Reason: Unknown user name or bad password User Name: Smithj Domain: ENTERPRISE Logon Type: 11 Logon Process: User32 Authentication Package: Negotiate Workstation Name: LAP-41614 Event Type: Failure Audit Event Source: Security Event Category: Logon/Logoff Event ID: 529 Date: 05/20/2008 Time: 6:10:02 AM User: NT AUTHORITY\SYSTEM Computer: LAP-41614 Description: Logon Failure: Reason: Unknown user name or bad password User Name: Smithj Domain: ENTERPRISE Logon Type: 2 Logon Process: User32 Authentication Package: Negotiate Workstation Name: LAP-41614 I pasted these in chronological order as displayed the the event viewer. The next event reports the account is locked. Notice that these 3 all occured at the same time. I did some research into the logon processes mentioned and found that Advapi (not to be confused with Advapi32) could be spyware and thus the cause. However, I am sure the Advapi mentioned is legit as I checked several other PCs w/ no issues and found this same process mentioned in those security event logs. Also this laptop in question is one that was built and deployed to the user less than a day prior so, it is hard to believe they went somewhere and got it. I also checked the user32 logon process and found user32.exe is a known trojan. I scanned the laptop but could not find any traces of it. Also like I mentioned prior, this is a recently built laptop and it is hard to believe it is a trojan. I am certain the user32 listed is actually user32.dll which appears to be a legit dll. I checked several other users with these issues and found when their account locked the security event log reported the same events. I checked on the error listed event IDs and found ID 529 indicates the user tried to log in with an unknown account (duh) or bad password (double duh,) but it doesn't make any sense why windows is trying to log in 3 times on it's own in succession. All users are running XP Pro. I've verified the users have all the current windows patches to date, including SP3. I've tried having them try with and without a docking station, but none have worked. Does anyone have any suggestion on what else to try? I've been banging my head against the wall for a few weeks w/ no success. Thanks. Tag: Web Sites not Loading Tag: 288415
  - 5
    - tcpip registry parameters missing - no network hello i am new to this, but after posting on several others and searchin endlessly for information online and other forums such as this, i hav found no post/thread specific to my situation, so i am going to start new thread. i would really appreciate any help you can provide!: our home has a cable connection and two computers, a laptop tha connects wirelessly using an 802.11g 4-port router, and a desktop with wired connection. the laptop never has had any problems; it wil connect directly through the cable modem, wired and wirelessly throug the router. the desktop has been having issues forever...it woul randomly connect to the network, work for weeks at a time, but the stop. it would always work connected to the cable modem. after tryin just about everything i (and everyone i know and spoke with) could thin of, i reformatted the desktop (there were other problems too...). whil drastic, everyone agreed that i had tried everything. i did not have the recovery disk, so after reformatting with xp sp2; went online with the laptop and got the necessary drivers and utilitie (mostly from the dell site) on a flash drive. i installed everythin and set the tcp/ip settings in the properties of the local are connection (which always has limited or no connectivity), but i stil cannot get online with that computer. (i can still get online with direct connection to the cable modem. after trying many, many things, someone suggested that i check th 'enable proxy' parameter in the registry, which was when i noticed tha it didn't exist. (not that i can see...can that be hidden???) neithe do most parameters associated with dhcp. this makes sense why i canno get an ip from the router, but i can find very little info (and i hav stumped many of my friends) on what to do if the values of them ar incorrect. i cannot even log into the router from the computer (nor ca i see the computer on the network from the laptop) there is no weird software (beyond some weird broadcom suite installed by mistake but i have checked...it's on my laptop and causin no problems). i have a degree in computer science, so i am not novice...although i did leave a lot out of this message (had i include everything i have done this would be the worlds longest post...4 month now). i also have been working out of the field for awhile (3 years) and when i did was in software design...most of my networking skills ar a bit dated (but i have always known at very least enough to have all m computers at home online with no problems) if you could, imagine i have tried all the basics...if you hav something new or different i can try, please help...until i fix th desktop i am <i>sharing</i> my laptop his desktop used to be used at his office so i do not have the exac specs on it...it's a dell optiplex gx280 (there is some info on dell' site) - basics; p4 2.8GHz, 512 MB RAM, 80 GB maxtor HD...nothin specific. (but there are some things i have discovered in all of this so please ask anything that may clarify!) that also means it was on X Server network, but the reformat would have taken care of thos settings, right thank you jennife sorry i can't post the ipconfig /all, but i cannot get online using th computer with the problem! (it looks NOTHING like m laptop's...including the auto appended dns suffix):mad Tag: Web Sites not Loading Tag: 288412
  - 6
    - Guest vs Owner details I'm using XP Pro on a network that's mainly XP Pro. There's a printer connected to my computer which is shared. I wish to view the owners of documents that print. All I see is owner GUEST. How can I view computer names or users. The computers are part of a domain and part of a workgroup. Any ideas? -- Muzzi Tag: Web Sites not Loading Tag: 288406
  - 7
    - OT: Intel Wireless WiFi 4965AGN stuck at 54.0 Mbps Does anyone know why a HP Compaq 6820s laptop that has an Intel Wireless WiFi 4965AGN mini-PCI adapter be constantly stuck at 54.0 Mbps when within 3 feet of the 11n router? I have followed the recommendations of Intel and set the router to WPA(2) with AES encryption. The card was warranted replaced and I have tried both the Intel Pro management software and Wireless Zero Configuration. Neither will get the Intel card to exceed the 54.0 Mbps speeds. The router is a TRENDnet TEW-631BRP and I know that the 802.11n signals are working since there is a D-Link RangeBoost N (DWA-142) USB adapter two floors up (router in the basement, D-Link on the second story of the home) which is connecting at greater than 200Mbps. BTW: Does anyone know if the number of wires connected to this model of mini-PCI wireless card is important? This one only has two connected to "port" 1 and 3. One is completely "non-existant" / not connected (port2.) I fear that HP has lamed this adapter since I found several references that this card needs all antennas connected but it seems that there is only one in this HP. Tag: Web Sites not Loading Tag: 288393
  - 8
    - XP thinks it is master browser I have 1 xp sp2 laptop that thinks it is the master browser and is always forcing elections with our DC. I did set the isdomainmaster = False in reg, but with no change in results. Is there snything else I can do?? CR Tag: Web Sites not Loading Tag: 288392
  - 9
    - LAN Vs LAN today I seen a pc with a master computer browser issue where the pc on the LAN was getting the master browser msg from a PC on another LAN in another building in another company! I have not seen this happen before. Although I was able to simply shut down the broswer service on this PC I am curious why this happened and if others have seen this. Tag: Web Sites not Loading Tag: 288388
  - 10
    - Login Problem Hello I have de following problem when i tried to logon in my laptop without network. No domain controller is available for domain <domain name> due to the following: There are currently no logon servers available to service logon request. Make sure that the computer is connect to the network and try again. If the problem persist contact your domain administrator. event id 5119 I need to logon in my laptop out of my office and i can't -- Thanks Samuel Sousa Tag: Web Sites not Loading Tag: 288387
  - 11
    - Logon failure: eventid: 537, logon process: garbled I have an xp pro system that cannot connect to a second xp pro. It is a workgroup configuration. I get the following error in the event log with a garbled Logon Process Event Type: Failure Audit Event Source: Security Event Category: Logon/Logoff Event ID: 537 Date: 5/20/2008 Time: 3:37:45 AM User: NT AUTHORITY\SYSTEM Computer: STAFF1 Description: Logon Failure: Reason: An error occurred during logon User Name: Administrator Domain: STAFF1 Logon Type: 3 Logon Process: Ã®-Ã?wÃ?ÃºÃ? Authentication Package: NTLM Workstation Name: STAFF1 Status code: 0xC000006D Any ideas??? Tag: Web Sites not Loading Tag: 288386
  - 12
    - hai gays and friends...... Hi......gays and friends...... iam shyni....... this is my site...... www.getitlove.blogspot.com www.getitlove.blogspot.com www.getitlove.blogspot.com www.getitlove.blogspot.com www.getitlove.blogspot.com www.getitlove.blogspot.com www.getitlove.blogspot.com www.getitlove.blogspot.com www.getitlove.blogspot.com www.getitlove.blogspot.com www.getitlove.blogspot.com www.getitlove.blogspot.com www.getitlove.blogspot.com www.getitlove.blogspot.com www.getitlove.blogspot.com www.getitlove.blogspot.com www.getitlove.blogspot.com Tag: Web Sites not Loading Tag: 288384
  - 13
    - Wired connection problem I have a SURFboard broadband modem, a D-link wireless router, and both the PC and the Dell Vostro laptop are running Windows XP. Also running Nortons on the PC and Bitdefender on the laptop. I had E-Trust EZ armor(antivirus and firewall) , and Network Magic also installed on the PC. Both expired, so I opted to uninstall both. NM came off without a hitch, everything from E-Trust stayed after the uninstall, and I finally removed it by deleting it all from C:. Every since I started trying to remove it, I've had connection problems that make no sense at all. I can connect to my homepage(google), enter a search topic, view the webpage, and then when I try to visit another page, or go back to Google, I get the "IE cannot display webpage" message. My connections box shows I have a connection, my firewall shows no blocks, but my PC will not stay online. Through all of this, the laptop I'm typing on now, works fine. I've went through every Wizard program offered by Microsoft, to no avail. I've ran the cd that came with the router, reset the router, and ran any repair programs that are on the PC, and it just keeps happening. The last time I was able to get about 5 pages deep online before it booted me. I'm ready to throw the whole thing over the hill out back. Any suggestions? Tag: Web Sites not Loading Tag: 288380
  - 14
    - Cannot creater an internet connection I uninstalled a program that itunes installed and suddenly I lost my internet connection. I opened the Control Panel and the Internet Icon was missing. I tried to recreate it using the wizard. I selected doing it manually and when I clicked finish, nothing happened. It was as if I never started the wizard. At first I was getting the Acquiring a Network Address in my Local Network Connection and it would not end. Finally, somehow I got the Local network connection to connect but cannot get the Internet connection to connect. Any help would be appreciated. Tag: Web Sites not Loading Tag: 288376
  - 15
    - Access to the Windows folder on a mapped drive Hello, In order to support a legacy application I have to grant read/write access to the whole shared C: drive of a Windows XP Professional SP2 machine acting as a file server, including the C:\Windows folder. In other words, the clients (which are also Win XP Pro SP2 btw) mapping the C:\ drive on the host machine need to read files in the Windows folder of that machine. Everything is OK except that access to the Windows folder is denied. I understand that this is due to XP's security policies nonetheless. To overcome that restriction, I added an admin-type account on the file server for each workstation that needs this sort of elevated access level. Those accounts are the same case and have the same passwords as their counterparts on the workstations. This, however, didn't make any difference as access to the <mapped_drive>:\Windows folder is still denied. So my question is: In an scenario like this, how do I grant access to the C:\Windows folder on the file server so that the workstations can access the files in it? Thanks, Fernando Tag: Web Sites not Loading Tag: 288375
  - 16
    - Re-map network drive Hi, I'm having to disconnect and re-map the network drive every time i connect to the network drive?!?! Other ways the transfer speed to the network drive is really slow. Is this normal? -- Man oh man! Tag: Web Sites not Loading Tag: 288368
  - 17
    - WorkStation Keeps Disconnecting My windows xp work station keeps disconnecting from my file server map drives. It seems that when I logout and log back in and try to access my network drives it tells me that either my username or password is not correct. I try rebooting and logging in again, but it does not work. The only option I have is to change my ip address, and then it works. Can anyone help me with this. Thanks very much. Tag: Web Sites not Loading Tag: 288367
  - 18
    - How to change a drive's share name? If I right click on a drive, then Properties\Sharing, the drive's share name is shown. How do I change this share name? Thanks, Don Culp Tag: Web Sites not Loading Tag: 288359
  - 19
    - Windows Networking Problem caused by ICS? I have an operating network with four XP Pro SP3 based computers, two wired and two wireless on a Linksys router connected to a DSL modem. I added another wired laptop (XP Pro SP3) that I have been using on a network at another job. It used Novel Netware Client for Windows which I uninstalled. I set it up for my local Windows network exactly the same as the others. It uses NAV 2008 as does three of the other computers and one is using OneCare. The Windows and OEM firewalls are off. All the computers are in the same "Ournet" Workgroup. From this added laptop, I can view and access the shared files on the other four computers. I can ping the added laptop from the other computers and ping the original computers from the added laptop. However, the added laptop does not show up in My Network Places nor in "Entire Network/Microsoft Windows Network/Ournet" on the other computers. Even though I cannot see the added laptop, I can use Windows Explorer on the other computers to map a network drive to the shared folder on the added laptop! I have checked settings many, many times, read Knowledgebase articles, and looked in Forums and could find nothing that fixed my problem and made Windows Networking display the added laptop. Any suggestions would be helpful. I did find something unusual that may contribute to the problem. The added laptop is the only computer on the network that shows "Internet Connection" (Sharing) as a Network Connection. I have tried to disable or delete this network connection without any success. I could find nothing that worked in the Microsoft Knowledge base. I have disabled the adapter and the "Local Area Connection" and "Internet Connection" go away until I re-enable the adapter. I set both connections so I could see when they were active in the system tray. "Internet Connection" starts up right after the "Local Area Connection" starts but runs at 8Mh rather than the 100Mh of the Local Area Connection. I have recreated the network with the Network Setup Wizard making sure I indicate that this and all network computers are connected to a router not to another computer. But ICS is still there. I have no idea if ICS is causing my network display problem but I would like to fix both. Any help would be greatly appreciated. Bill-R Tag: Web Sites not Loading Tag: 288358
  - 20
    - Static/Advanced Routing I could do a simple thing and get a switch, but there are circumstances that make static routing more ideal - if what I am looking to do can be done. What that is is file and print sharing between computers that are associated with two routers - a primary router/gateway and a secondary router that is behind the primary router. Behind my modem is a router. Behind the router are two wireless computers, two wire-connected computers, and a VOIP phone. Behind that phone is another wire-connected computer. The problem is that this phone acts as a router and so the computer behind it is associated with a different subnet then the computers on the primary router. Is there a way to change this cinsequence through changing settings on the routers so that all computers are able to associate at the level of the primary router? How? I saw that there was a function on the phone to disable its DHCP Server capabilities and a way to apply Static Routing settings with a Destination IP, Subnet Mask, Gateway IP, Metric, and Interface. Is this where the action takes place? Would I set the computer that is behind this phone to use DMZ? Here is some IP info for the main router... WAN IP Address: Will keep private LAN IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 Domain Name: Castillo Host Name: Castillo LAN MTU: Auto Local DHCP Server: Enabled Default Gateway: Will keep private DNS Server(s): Will keep private And for the phone: WAN IP: 192.168.1.250 (Static) LAN IP: 192.168.15.1 Subnet Mask: 255.255.255.0 WAN MTU: 1500 LAN MTU: N/A Local DHCP Server: Enabled Default Gateway: 192.168.1.1 DNS Server(s): 192.168.1.1; Will keep private Other Notes: WAN-level DMZ enabled for phone -- -Zakhary Tag: Web Sites not Loading Tag: 288352
  - 21
    - Is network transfer speed limited by MS patch Yesterday I noticed that my laptop computer network appears to be limited. The laptop has a 100 Mbps connection to a Vista server with a 1 Gpbs NIC and switch. The Vista system is a SageTV server and I use the laptop to view videos using the Sage Client. While tring to view videos my laptop network speed appears to be limited to just over 2.5 Mbps. I then tested network transfers between the laptop and Vista server and they also were very slow, none completed properly. I then installed service pack 3 hoping that would correct the problem, it did not. Today I used my backup system which also has a 100 Mbps connection to determine when the problem occurred. It looks like patch KB947864 kills the network transfer speed on my backup. Removing the patch on the backup system correct the problem. It does not have SP3 installed yet. I tried to correct the laptop by removing that patch, it did not make any difference. The SP3 install could not be removed. I tried going back to previous restore points, none were successful. Can anyone verify the patch KB947864 (Cumulative Security Update for Internet Exployer 7 for windows XP) kills their network speed when connecting to a Vista system. Anyone know how I can fix the network speed on my laptop? Tag: Web Sites not Loading Tag: 288343
  - 22
    - Force mapped drive not to connect at startup on Windows XP I have a mapped drive on my laptop which can only be used when i am connected to a VPN. On logging in it attempts to logon or connect to the mapped drive and the login hangs for upto 60 additional seconds. Is it possible to force the mapped drive not to logon until i actually attempt to use the mapped drive? This way i can have a fast login? Tag: Web Sites not Loading Tag: 288336
  - 23
    - network not in range I just did a clean reinstall of XP on ONE of my wireless laptops. I can log into a neighbor's unsecure network but I can't log into mine. It shown no signal and when I try to connect it says that the network may be out of range. It is in the same room and my other laptop connects just fine. I tried with and without security. I have MAC access enabled and I am using the same PC card adapter I used prior to the reinstall when it did work. any ideas????????? bill Tag: Web Sites not Loading Tag: 288334
  - 24
    - Network Trouble I have a windows xp network at home and office. I use a laptop with windows xp on both networks. Recently my laptop "lost" the icons of the various computers at "My Network Places" that are part of the home and office networks. I double checked that the various computers were sharing enabled........they were. To my knowledge no network changes were made to the laptop network settings. ???????????????? How do I regain the icons of the network computers?????????? Thanks, Gene Brabston -- Tag: Web Sites not Loading Tag: 288327
  - 25
    - Static IP fails to DHCP We're trying to configure a static address on an XP machine. When the machine is restarted it switches itself back to DHCP settings. If we switch it back to static, same thing, next time machines restarted we lose the static address and reverts to dhcp. It's extremely frustrating and I can't find any help on this. Tag: Web Sites not Loading Tag: 288325

I recently and a virus on my computer. It was removed but I can't access some
of my web sites (Yahoo.com) and a few others. Was anything possibly removed
from my computer in the process?
--
Go Ravens

Top

Re: Web Sites not Loading by Lem

Lem
Tue May 27 19:19:20 PDT 2008

kirby wrote:
> I recently and a virus on my computer. It was removed but I can't access some
> of my web sites (Yahoo.com) and a few others. Was anything possibly removed
> from my computer in the process?

Read this article and try the suggestions therein:
http://networking.nitecruzr.net/2005/05/problems-with-lsp-winsock-layer-in.html

--
Lem -- MS-MVP

To the moon and back with 2K words of RAM and 36K words of ROM.
http://en.wikipedia.org/wiki/Apollo_Guidance_Computer
http://history.nasa.gov/afj/compessay.htm

Top