XP, Network Drives, Disconnect Drives require a sync of offline fi

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Maximum 10 connections at a time! Dear all, First question: Can we by any chance increase the number of connections that windows XP professional hold? as I know, the maximum number is 10, can we increase that? Second: How can I count the number of connections on the server if was XP professional? I need to know whether I am reaching the maximum or not, Thanks! Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287651
  - 2
    - Comments field in Windows Explorer columns delayed--XP, network drive The comments field in MS Word is available for view in Windows Explorer; however, when I open a folder on a network drive with the comments column visible, it fails to load the comments in the Word document, or loads them extremely slow. Any ideas? Thanks, Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287644
  - 3
    - Networking problem!! Wierd one!! Dears, I have a software running on a server computer "XP Professional" and other computers all having XP Professional, I have changed the session suspession to be more than an hour. The problem is that: if 4 computers or less are connected to the server, the session can stay alive for 30 mins and more and works properly, otherwise, if 5 or more, the session works for 15 mins or less, after the 15 minutes, it droppes and dies. any help, please??? Cheers! Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287643
  - 4
    - Cannot Ping or see two of three workgroup PC's All of a sudden.. two desktops cannot see each other. The two desktops can see only the laptop. Computers A, B, and C. B being the laptop. A and C can ping B But B, cannot ping A or C, nor can A ping C, or C to A. All in the same workgroup. All firewalls shut off. I am not sure if it is possible.. but can the installation of ACT on A cause this problem? I am thinking that an update was made on the two desktops and changed a setting. I recall a registry change to a "zero" setting for a fix.. but this may be for something else.... Any thoughts appreciated. Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287642
  - 5
    - WAP or WEP My friend is trying to establish wireless connection for laptop via Linksys wireless-B router, and she was asked to enter WAP or WEP. How do you know which and what do you enter? I've never had this happen to me so I don't know how to help her. She is running Windows XP professional. Please help! Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287632
  - 6
    - something happend to ssl certs. All websites broken Hey guys, as of yesterday something happened to my computer and now any website I go to that uses SSL is broken. I've tried with firefox and IE and it's the same problem. I mostly use firefox so I took screenshots of the errors in that since I'm not sure how to view the certs in IE. I've taken a few screenshots you can see in this gif. A new snap loads every 2 seconds. A quick note about the first image. My home page is yahoo.com but the cert error is *.google.com my only guess might be that I am using the google notebook plugin but regardless I shouldn't be getting these errors at all. As you'll notice all the certs I "examined" show that they are "not part of a certificate". So something is definitely messed up on my pc. I've reinstalled firefox and am current on windows update but no luck. I don't get this problem on any other computer. http://buggyonpurpose.com/random/cert-problems.gif I'd appreciate ANY help I can get because this is quite annoying. One site in particular wont load at all for me when it goes into ssl mode. It's as if the website doesn't exist but I know better of course (it's my own site!) Thanks Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287631
  - 7
    - Disabling Automatic Redial I have 2 comps on a LAN, both of which connect to ISP via the client. Everything works well. On both comps, the Internet Options/Connections are set to "Never dial a connection" The problem is that when we are intentionally off line, occasionally something is causing an (automatic?) redial. I have no idea which machine is doing this, or how to find out (in a reasonable amount of time). It is causing a real problem with our fax setup, however. Is there some way to prevent this auto redial, or at least find out what is causing it? Both comps are WinXP, SP2, IE6 and OE6 - pretty standard otherwise, although both have acquired a number of special apps over their lifetime (2 - 3 years). Appreciate any suggestions. Dave Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287630
  - 8
    - How many PCs allowed under XP Home? We have 6 PCs that seem to be networked to each other successfully under XP Home. However, upon installing a network printer (that appears as a PC under MS Network) we now seem to have problem connecting. Also, we have an Apple and 2 laptops that can connect wirelessly. Could the problem be down to having too many PCs under XP Home? We have one PC that has XP Pro but we don't have a server. Sometimes the PCs can connect to the printer but sometimes they can't, it's very random. The printer is an Epson Aculaser C100N. Thank you for your attention and any advice you can give us. David H. Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287629
  - 9
    - Joining a 2003 domain "The following error occurred attempting to join the domin: Logon failure: unknown user or bad password." I'm trying to join a Dell Latitude D520 with XP Pro SP2 to a 2003 domain and that is the error I'm getting. I've swapped the hard drive with a known good hard drive that I was able to join to the domain with no success. The hard drive out of the suspect laptop was able to join the domain in another laptop. The laptop is getting an IP address and can get out to the web. It's pulling everything it needs except joining the domain. All acccounts used (4 so far) are domain admins. I checked the log and am getting a returned 1326 error. Any ideas? Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287628
  - 10
    - Remote Shutdown I am running XP on this machine, but i have a computer downstairs running 2000. i lately have been exploiting the CMD commands, but i still cannot remote shutdown the computer. it tells me "access is denied". any reason why? any way to fix? thanks in advance, C Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287621
  - 11
    - Wireless Connection I am traveling this week. Last week and this morning my wireless connection work just fine. I changed hotels and am trying to connect. I see a strong strength for the hotel but when I connect, I get a limited connection. I have deleted out all my previuos connection and rebooted. Still limited. Can anyone help me here... Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287620
  - 12
    - No network access, winlogon.exe 50% Beginning on Monday of last week I have 5 workstations and counting (amongst 400) that have lost the ability to connect to and authenticate to our network server shares or AD but yet are able to access the internet. The issue is also not limited to the individual user profile as our own (admin) logins on the affected systems also fail to reach these servers from affected machines. An error of "no path found" or "you may not have proper permissions" occurs. The other identifiable feature is that the winlogon.exe process is consuming 50% of the CPU capacity. The system responds to a ping, and can ping other systems including the systems with shares that can't be accessed. Nbtstat, shows nothing listed. Running F-Port revealed that most of the communications ports pid's were Not tied to a directory (McAfee and RDT did). I have tried practically everything I can think of: >Ran Full McAfee scan, removed & reinstalled McAfee 8.5i >Ran process explorer- nothing unusual >Ran Rootkit revealer- no root kits seen >Ran WireShark, nothing obvious was evident >Removed system from Domain >Unchecked and Re-installed Client for MS Neworks & File & Print from local network connection. >Tried connecting to vpn, failed >Ran sfc, no errors > Ran netsh int ip reset, seemed to hang, fail Any ideas or help appreciated! (also posted on RedmondMag.) Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287619
  - 13
    - Windows Xp User Synchronise Hello! I have been reading a articel from knowledgebase. The web adress for it is http://support.microsoft.com/kb/811660/en I have been for a long time trying to fix that issue without reinstalling windows and what exactly my hypothetic solution is, that you just clean the whole list through some way so you just get the synch path from one use on one single computer. I have ben reading many more articels about this and it seems like this is possible to do by reseting one key in regedit. Im wondering if someone could tell me exactly what key is it that i should reset in regedit and how in order to clean the list and so i dont get a list from many previous users and just to make it clear i dont what to put them on inactivity i just want the list to be fresh and clean from scratch. Best Regards Insect Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287618
  - 14
    - AOL Broadband / Win XP networking confliction I set up the router on PC1 using the AOL disk and instructions provided, connecting by Ethernet. Set up PC2 using AOL disk and network adaptor. Shared 'Shared Documents' from PC1 with PC2. PC1 is shown amongst 'My Network Places' on both PCs, but can't make PC2 visable on PC1. Have tried Network Wizards. Security software seems to contradict, stating that network belongs to PC2, and that PC1 isn't on the network. Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287597
  - 15
    - HSDPA and LAN Hi folks, I'm on a company LAN with very restricted internet policies. I also have a mobile phone with a HSDPA connection. I have set this up to connect and the connection is working fine. If I use either the local area connection or the phone connection, everything works as expected. With the former I get all access to local servers, the Intranet, and restricted access to the Internet. With the latter I get unrestricted access to the Internet but no local access. If I activate BOTH though, it behaves erratically. Sometimes I don't get internet access. Sometimes I don't get local access. Sometimes I don't get ANY access. The moment I disable one of the two connections, it reverts back to normal behaviour for the remaining connection. I guess, ignoramus as I am, that this must have something to do with Routing? Would anyone have the patience to help a complete n00b out? Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287591
  - 16
    - Windows Auditing Any tools available to Audit a windows XP operating system? i-e missing patches, mis configurations, access controls etc. Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287587
  - 17
    - DNS resolution not working Hi, I have a problem with DNS resolution on a few desktops on our network. They randomly stop being able to resolve DNS names within applications other then nslookup. This is what works and doesnt. nslookup: works fine, resolves the host names. ping: fails on resolving the host name, but will ping if ip address is entered. ie: fails on host name, works on ip. Tried ipconfig /flushdns, doesnt fix the problem. But "ipconfig /release & ipconfig /renew" fixes the problem for a while. The DNS is working fine, as nslookup works and other computers on the network are not affected. the problem appears to be location on the desktop, but I am not sure what is causing it, driver problem? I have searched for this and found a few other peopel else where have had a similar problem but no solution was found. Any help would be appriciated. Thanks Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287586
  - 18
    - Exclamation mark impossibile to avoid on any nic 8139 I have a great problem on XP Pro Sp2. Notice: Hardware P4 dual and nic realtek 8139 fully working. Tested with any kind of Linux. No virus. No troyan. Tried sfc/scannnow and reinstallation over current XP starting from CD. I've tried everything, even started with UBCD4Win (avoiding the lock on hardware profiles in the registry) and deleting every reg entry I can found bounded to the nic, and every drivers present in the HD, inf, and even from .cab archive cache. I have disabled the nic, installed a new one, and I got the same problem again. I've serched hidden nic, but I don't see any other nic ( Tested various drivers, from the original bounded with the nic (and is for XP) to new realtek update of this year. NOTHING! Everytime I reinstall the nic/driver, everything seems OK, but finally XP says (sorry for traslation because my system is Italian located) that it can find a file. I don't know what file because it says nothing about this file. Every kind of driver i tested say that. Do you have any procedure to check every single step XP do to reach that bad result? A system to debug the problem step, by step finding why Xp end to that result? Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287584
  - 19
    - drmsmc port 1878 - what is this? Please if someone could tell me what this "service" is or what drmsmc relates to would be much appreciated. Noticed it connected as a system service using ewido's analysis feature. Thanks Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287583
  - 20
    - How to secure your windows XP and network Windows XP could best secure with a new suite of software Secure Auditor. Single IP license just $ 100 which is capable of performing auditing, event log management, windows password auditing, port scanning, windows inventory and asset management, ftp brutforce attack, http bruteforce attack etc. Other modules of this tool are also capable of performing audit on Oracle, MSSQL and Cisco routers with around 30 embedded tools. You know what is the best thing about Secure Auditor is? It provides complete specification and solution of identified vulnerabilities. Just check it out! Download link http://www.download.com/Secure-Auditor/3000-2653-10826743.html?part=dl-SecureAud&subj=uo&tag=button Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287582
  - 21
    - can't connect to computer I have a desktop computer and a laptop computer networked together. The desktop is running XP home, the laptop Pro. Both computers see the other one in the "view workgroup computers" and my laptop can access my desktop, but when I try to access the laptop from the desktop I get an error message stating that my laptop is unavailable and I might not have permission to access that resource. Why is this and how can I fix it? Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287579
  - 22
    - Wit's End with Networking Here's my deal: I have four computers. One is an iMac hardwired to my Belking router. The other three are laptops--one MacBook and two PC's running XP Pro. All four can access the internet, three of them wirelessly. My Macs can see each other, share files, copy files, etc. I'd like my PC's to do the same. I don't care if the PC's can see the Macs. I'd like to be able to share files between the two PC's, since one is in a remote part of the house. My problem: Everything I've tried, using HP help, Microsoft help and a next door neighbor who claims expertise on PC's has proven unsuccessful. I've put in about six hours on this and I'm where the title of this post suggests. Isn't there a simple way to have these two computers recognize each other? Thanks in advance. Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287573
  - 23
    - New connection, have I been hacked I use Live Messenger and a file sent to me was blocked. I have a wireless adapter and connect to my neighbours router (yes she gave me the access code) and I ussualy have a wireless connection logo in the system tray. When I started up the pc the other night I had an extra icon showing a cable connection to another computer. I also now have a modem installed in device manager. I think it is my neighbours computer which I am connecting to but aint to sure as neither of us is experts. The pc is also running much slower now. I'd love to know of anyway of identifying a deliberate attack from someone. Here's what the modem log says. 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\tapisrv.dll, Version 5.1.2600 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\unimdm.tsp, Version 5.1.2600 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\unimdmat.dll, Version 5.1.2600 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\uniplat.dll, Version 5.1.2600 04-06-2008 21:59:19.421 - File: C:\WINDOWS\system32\drivers\modem.sys, Version 5.1.2600 04-06-2008 21:59:19.421 - File: C:\WINDOWS\system32\modemui.dll, Version 5.1.2600 04-06-2008 21:59:19.421 - File: C:\WINDOWS\system32\mdminst.dll, Version 5.1.2600 04-06-2008 21:59:19.421 - Modem type: Communications cable between two computers 04-06-2008 21:59:19.421 - Modem inf path: mdmhayes.inf 04-06-2008 21:59:19.421 - Modem inf section: M2700 04-06-2008 21:59:19.421 - Matching hardware ID: pnpc031 04-06-2008 21:59:19.453 - 19200,8,N,1, ctsfl=1, rtsctl=2 04-06-2008 21:59:19.453 - Initializing modem. 04-06-2008 21:59:19.453 - Waiting for a call. 04-06-2008 21:59:19.484 - 19200,8,N,1, ctsfl=1, rtsctl=2 04-06-2008 21:59:19.484 - Initializing modem. 04-06-2008 21:59:19.484 - Dialing. 04-06-2008 21:59:19.500 - Send: CLIENT 04-06-2008 21:59:21.500 - Timed out waiting for response from modem 04-06-2008 21:59:21.500 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:21.515 - Send: CLIENT 04-06-2008 21:59:23.515 - Timed out waiting for response from modem 04-06-2008 21:59:23.515 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:23.531 - Send: CLIENT 04-06-2008 21:59:25.531 - Timed out waiting for response from modem 04-06-2008 21:59:25.531 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:25.546 - Send: CLIENT 04-06-2008 21:59:27.546 - Timed out waiting for response from modem 04-06-2008 21:59:27.546 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:27.546 - Hanging up the modem. 04-06-2008 21:59:27.546 - Hardware hangup by lowering DTR. 04-06-2008 21:59:29.546 - A timeout has expired waiting to comm event to occour. 04-06-2008 21:59:29.546 - 19200,8,N,1, ctsfl=1, rtsctl=2 04-06-2008 21:59:29.546 - Initializing modem. 04-06-2008 21:59:29.546 - Waiting for a call. 04-06-2008 21:59:29.546 - Session Statistics: 04-06-2008 21:59:29.546 - Reads : 0 bytes 04-06-2008 21:59:29.546 - Writes: 0 bytes I certainly didn't set this up, please help Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287568
  - 24
    - New connection appeared, is it a virus I use Live Messenger and a file sent to me was blocked. I have a wireless adapter and connect to my neighbours router (yes she gave me the access code) and I ussualy have a wireless connection logo in the system tray. When I started up the pc the other night I had an extra icon showing a cable connection to another computer. I also now have a modem installed in device manager. I think it is my neighbours computer which I am connecting to but aint to sure as neither of us is experts. The pc is also running much slower now. I'd love to know of anyway of identifying a deliberate attack from someone. Here's what the modem log says. 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\tapisrv.dll, Version 5.1.2600 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\unimdm.tsp, Version 5.1.2600 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\unimdmat.dll, Version 5.1.2600 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\uniplat.dll, Version 5.1.2600 04-06-2008 21:59:19.421 - File: C:\WINDOWS\system32\drivers\modem.sys, Version 5.1.2600 04-06-2008 21:59:19.421 - File: C:\WINDOWS\system32\modemui.dll, Version 5.1.2600 04-06-2008 21:59:19.421 - File: C:\WINDOWS\system32\mdminst.dll, Version 5.1.2600 04-06-2008 21:59:19.421 - Modem type: Communications cable between two computers 04-06-2008 21:59:19.421 - Modem inf path: mdmhayes.inf 04-06-2008 21:59:19.421 - Modem inf section: M2700 04-06-2008 21:59:19.421 - Matching hardware ID: pnpc031 04-06-2008 21:59:19.453 - 19200,8,N,1, ctsfl=1, rtsctl=2 04-06-2008 21:59:19.453 - Initializing modem. 04-06-2008 21:59:19.453 - Waiting for a call. 04-06-2008 21:59:19.484 - 19200,8,N,1, ctsfl=1, rtsctl=2 04-06-2008 21:59:19.484 - Initializing modem. 04-06-2008 21:59:19.484 - Dialing. 04-06-2008 21:59:19.500 - Send: CLIENT 04-06-2008 21:59:21.500 - Timed out waiting for response from modem 04-06-2008 21:59:21.500 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:21.515 - Send: CLIENT 04-06-2008 21:59:23.515 - Timed out waiting for response from modem 04-06-2008 21:59:23.515 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:23.531 - Send: CLIENT 04-06-2008 21:59:25.531 - Timed out waiting for response from modem 04-06-2008 21:59:25.531 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:25.546 - Send: CLIENT 04-06-2008 21:59:27.546 - Timed out waiting for response from modem 04-06-2008 21:59:27.546 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:27.546 - Hanging up the modem. 04-06-2008 21:59:27.546 - Hardware hangup by lowering DTR. 04-06-2008 21:59:29.546 - A timeout has expired waiting to comm event to occour. 04-06-2008 21:59:29.546 - 19200,8,N,1, ctsfl=1, rtsctl=2 04-06-2008 21:59:29.546 - Initializing modem. 04-06-2008 21:59:29.546 - Waiting for a call. 04-06-2008 21:59:29.546 - Session Statistics: 04-06-2008 21:59:29.546 - Reads : 0 bytes 04-06-2008 21:59:29.546 - Writes: 0 bytes I certainly didn't set this up, please help Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287567
  - 25
    - How do I know if I've been hacked I use Live Messenger and a file sent to me was blocked. I have a wireless adapter and connect to my neighbours router (yes she gave me the access code) and I ussualy have a wireless connection logo in the system tray. When I started up the pc the other night I had an extra icon showing a cable connection to another computer. I also now have a modem installed in device manager. I think it is my neighbours computer which I am connecting to but aint to sure as neither of us is experts. The pc is also running much slower now. I'd love to know of anyway of identifying a deliberate attack from someone. Here's what the modem log says. 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\tapisrv.dll, Version 5.1.2600 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\unimdm.tsp, Version 5.1.2600 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\unimdmat.dll, Version 5.1.2600 04-06-2008 21:59:19.375 - File: C:\WINDOWS\system32\uniplat.dll, Version 5.1.2600 04-06-2008 21:59:19.421 - File: C:\WINDOWS\system32\drivers\modem.sys, Version 5.1.2600 04-06-2008 21:59:19.421 - File: C:\WINDOWS\system32\modemui.dll, Version 5.1.2600 04-06-2008 21:59:19.421 - File: C:\WINDOWS\system32\mdminst.dll, Version 5.1.2600 04-06-2008 21:59:19.421 - Modem type: Communications cable between two computers 04-06-2008 21:59:19.421 - Modem inf path: mdmhayes.inf 04-06-2008 21:59:19.421 - Modem inf section: M2700 04-06-2008 21:59:19.421 - Matching hardware ID: pnpc031 04-06-2008 21:59:19.453 - 19200,8,N,1, ctsfl=1, rtsctl=2 04-06-2008 21:59:19.453 - Initializing modem. 04-06-2008 21:59:19.453 - Waiting for a call. 04-06-2008 21:59:19.484 - 19200,8,N,1, ctsfl=1, rtsctl=2 04-06-2008 21:59:19.484 - Initializing modem. 04-06-2008 21:59:19.484 - Dialing. 04-06-2008 21:59:19.500 - Send: CLIENT 04-06-2008 21:59:21.500 - Timed out waiting for response from modem 04-06-2008 21:59:21.500 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:21.515 - Send: CLIENT 04-06-2008 21:59:23.515 - Timed out waiting for response from modem 04-06-2008 21:59:23.515 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:23.531 - Send: CLIENT 04-06-2008 21:59:25.531 - Timed out waiting for response from modem 04-06-2008 21:59:25.531 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:25.546 - Send: CLIENT 04-06-2008 21:59:27.546 - Timed out waiting for response from modem 04-06-2008 21:59:27.546 - Failed to send command because of WriteFile() Failure, Error=000003e3. 04-06-2008 21:59:27.546 - Hanging up the modem. 04-06-2008 21:59:27.546 - Hardware hangup by lowering DTR. 04-06-2008 21:59:29.546 - A timeout has expired waiting to comm event to occour. 04-06-2008 21:59:29.546 - 19200,8,N,1, ctsfl=1, rtsctl=2 04-06-2008 21:59:29.546 - Initializing modem. 04-06-2008 21:59:29.546 - Waiting for a call. 04-06-2008 21:59:29.546 - Session Statistics: 04-06-2008 21:59:29.546 - Reads : 0 bytes 04-06-2008 21:59:29.546 - Writes: 0 bytes I certainly didn't set this up, please help Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287566
- Next
  - 1
    - Can't ping my PC from the internet My PC has two network cards... One is an onboard gigabit connected to my LAN. The LAN is connected to a router, as are other PCs on my LAN. The router is connected to a cable modem. The second NIC is a 10/100mbit PCI card connected directly to another cable modem. The GigE NIC is hardcoded to an IP on my private network with the following settings: IP: 10.0.11.16 Mask: 255.255.255.0 DNS: 10.0.11.1, 64.59.135.143 Gateway: 10.0.11.1 Gateway metric: 100 (previously auto) Interface metric: 100 (previously auto) The 10/100 NIC pulls a dynamic IP from my cable internet provider and currently has the following settings: IP: 68.145.38.197 Mask: 255.255.255.0 DNS: 64.59.135.143, 64.59.135.145 Gateway: 68.145.36.1 Gateway metric: auto Interface metric: auto The router is configured with my private network info on the LAN side and dynamic settings pulled from my cable internet provider on the WAN side. Currently configured as follows: LAN side... IP: 10.0.11.1 Mask: 255.255.255.0 Gateway: 10.0.11.1 WAN side: IP: 68.145.78.218 DNS: 64.59.135.143 Gateway: 68.145.76.1 At this point I'm unable to connect to any services on the 100mb port, and up until my last settings changes and reboot I was not even able to ping the 100mb port. My last change was to put the gateway and interface metrics on the GigE port to 100 to ensure any remote traffic was going through that interface, and to keep my local LAN traffic on the GigE interface. I believe I should not have applied a metric to the GigE interface though. At this point I cannot connect to any services on either port. Before my last settings change I was able to connect the the remote desktop through the GigE interface, but not any longer. What I am trying to do: - Any PC on my LAN, except this one, should use the internet connection through the router. - This PC should pass local LAN traffic over the GigE port only. - This PC should pass internet traffic over the 100mb port only. The PC's on my LAN are all hardcoded for the 10.0.11.0/24 network. Gateway is 10.0.11.1. This appears to be working. This PC does not consistantly pass it's internet traffic through the 100mb port. I've tried removing the gateway IP from the GigE port, changing the gateway metric to 100, and finally the interface metric to 100. What should I be doing to make this work??? Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287555
  - 2
    - domain not visible some time after system start Hi, we have a small network with a NT domain. A XP Home SP2 computer - it was not my decision to put a Home edition on the network - has to access a shared printer on another PC. All other computers can access the shared printer on this PC so that I think that the only problem is this XP home computer. The problem is that this XP home PC does not see the NT domain after a system start. But after some time the domain is visible with net view /domain. The fact that the NT domain is not visible during startup results in a failing net use lpt2: \\PC_with_the _shared_printe\shared_printer r command. The first thing what I discovered is that ipconfig /all shows the node type as "unknown". The solution of Microsoft is to set the EnableProxy value in the registry to 0 or 1 (http://support.microsoft.com/kb/310570/en-us). This has no effect on this PC, the node type is still "unknown". I could not find a second solution. Also PCuck's Website has only this solution (http://networking.nitecruzr.net/2005/05/address-resolution-on-lan.html). Because the importance of a clean name resolution is often stressed I want to have a clear value here. What I have to do? The second thing is that browstat status shows: Status for domain ktsntdom on transport \Device\NetBT_Tcpip_{0094402A-76BF-48C6-B6B3-1B5BAD6C72FA} Browsing is active on domain. Master browser name is: KTS9 Could not connect to registry, error = 5 Unable to determine build of browser master: 5 Unable to determine server information for browser master: 5 2 backup servers retrieved from master KTS9 \\HOME \\KTS9 There are 8 servers in domain ktsntdom on transport \Device\NetBT_Tcpip_{0094402A-76BF-48C6-B6B3-1B5BAD6C72FA} There are 2 domains in domain ktsntdom on transport \Device\NetBT_Tcpip_{0094402A-76BF-48C6-B6B3-1B5BAD6C72FA} KTS9 is a NT server so that we don't have Guest authentication here what could cause the error = 5. Because none of the other computers show this error with browstat, firewall and antivirus problems can be excluded on the master browser, I think. I looked up the restrictanonymous setting on KTS9 - it was not set. A browser conflict should be detectable with the output of browstat. So I have checked all points from PChuck's website (http://networking.nitecruzr.net/2005/06/mysterious-error-5-aka-access-denied.html). What else could cause this error? What can cause the delay until the NT domain is detected? No other computer has that delay! Sorry for still not migrating to AD but I want to wait for a stable Windows Server 2008. I t was not really necessary to migrate for me. Thanks a lot. Uwe Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287552
  - 3
    - File and Printer Sharing I have Windows XP connected by a simple cross-over CAT5 cable to a computer with Windows ME. I am extremely frustrated, in that the detailed Microsoft instructions constantly divert me to connecting the other (ME) computer to the Internet. To heck with the Internet, I want to share my files and printer with the ME computer, and eventually to make the ME computer the host and reverse the sharing. I can ping the ME computer from the XP and get a good response. Invoking My Network Places doesn't show the ME computer from the XP computer and vice-versa. Where the heck are the instructions / Wizard that lets me GO FORWARD to share files and printer? HELP! Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287546
  - 4
    - Keep losing access to network Hi, Hope some of you experts can help me with this one. I have a simple network set up of 8 machines. I am using Machine #1 as a basic "file server". I have the Workgroup all set up and everything is working fine. But.... for some reason, every now and then the network will not let my users in when they try to access it. It's like a configuration or a permission or something just disppears or dies. And, today, for some reason, I can't even access the Network from my main machine (Machine #1). Each of my users are getting the error message, Unable to access the network.. you might not have permissions... etc". This just seems so rediculous to me as it was working just fine a day ago. We had done nothing to any of the systems to change anything. I even went in and tried to "repair" the network connection, but it didn't help. It's all out there, it just won't let some of my machines connect which used to. So, I am hoping one of you experts has the quick solution to this. Thanks! avi Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287541
  - 5
    - XP home network stopped working I need some help as I have run out of ideas. I have a simple XP Home network consisting of a desktop with 2 harddrives and a laptop with both wired and wireless connections. I have had 2 changes to my network lately and I can't figure out which one (or both) caused the problem. 1. I recently reformatted the desktop and reinstalled XP, when I did this I chose a new name for my computer. 2. I installed comodo firewall and avast a/v on the laptop, was not happy with them and uninstalled both, i now run AVG a/v and the windows firewall on both machines. The Problem: I ran the network setup wizard on both machines with MSHOME as the workgroup. I can access the laptop via the desktop through "view workgroup computers" without a problem. On the laptop I mapped over to the desktop's second harddrive so I can store photos, etc there. This mapping disconnects after a while and if I ping the desktop the mapping will work again for a while then repeats the cycle. I can browse to the desktop by putting the name into Explorer. Also on the laptop I cannot see the 2 computers in "view workgroup computers", I either get an error saying "the network path was not found" or "the list of servers for this workgroup is not currently available" What I have done so far: I have run the network wizard several times I dloaded the resource kit, opened command shell and typed ntrights +r SeNetworkLogonRight -u Guest ntrights -r SeDenyNetworkLogonRight -u Guest ntrights +r SeNetworkLogonRight -g Everyone ntrights -r SeDenyNetworkLogonRight -g Everyone Restrictanonymous is set to 0 on both machines I disabled the computer browser service on the laptop Both are running XP Home sp2, I am focusing on the laptop more because the errors occur when trying to browse to the desktop, should I be focusing on the desktop instead? I just want to be able to share the second drive and print to the desktop's printer but the mapping keeps failing on me then a ping will bring it back for a while. Thanks for your help Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287531
  - 6
    - Workgroup, I can' t access computers by name without prompt passwo Hello, I had install some workgroups with a mchine with xp pro as share server, sometimes I can access computer without prompt user and password. Other times when i change computer server, same windows xp pro, in the workgroup correct, he keep asking user and password to access shares. Someone have one idea, if i'm missing something? Could be some update? I only can solve this with a net use at the startup, but i would wonder if i have change any policy, start service or install update? thanks, regards. Pedro Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287530
  - 7
    - reinstalling network How can I uninstall my network and reset it up? the computer used to set it up is no longer attatched to the network and i cannot change settings for wireless etc. I have learned how to setup the network from scratch, but cannot remove existing setup. help -- Scott Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287529
  - 8
    - GET ME OFF MY DOMAIN!!! So I decided I wanted to set up a network for my wife and I to both use my printer without her having to find and install the printer software. It didn't work as well as I wanted it to and it left me with this old version of Windows schemes and no picture in my Start Menu. I read a couple articles on this and it said if your computer belongs to a domain/network you can not get a picture and it is in some kind of safe-mode. So how do I get off of the domain? Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287525
  - 9
    - Printing across workgroups HI, Is it possible to print to a printer on another workgroup? My PC is on the same subnet and I am able to ping the PC connected to the printer. Obviously i am not able to browse the printer but is there a way i can configure the printer using IP address? Thanks for any help. Ramesh Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287524
  - 10
    - Dynamic DNS client for Windows? In my Windows PC I have three network cards. They pull dynamic IP addresses from my ISP. I already have a domain registered at zoneedit.com, with the necessary A records for each network connection. Now I'm looking for a Dynamic DNS client to run as a service on my Windows machine that will automatically update ZoneEdit whenever an IP changes on any of my three network cards. I was doing this successfully about a year ago, but I cannot remember what client software I used at that time. Google finds a few DDNS clients out there, but they won't handle multiple network cards, or aren't free, or just don't make sense when it comes to configuration. Can someone suggest a good DDNS client that would meet my needs? Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287513
  - 11
    - wireless and ethernet connection for the same laptop I have a laptop with WiFi and I use it whereever there's wireless and at home. However, recently while I was travelling I had to connect to the hotel internet facility with a network cable (ethernet) but I couldn't get any connection. At home my laptop has a fixed IP-address (with its Mac address) and its included in the router as a wireless node. When I check my I394 connection I see "connected" with 400mbps ! But no of bytes being exchanged in 0. Can anybody please let me know how I can get internet connection using the ethernet cable ? Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287506
  - 12
    - Help!!! about tcp performance Hi, I have set all the registry, and can see the big window size in packets when file trans.But the speed seemed no change.When I copy file from remote server(4M Line),it still costed many more time than in vista. HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\GlobalMaxTcpWindowSize HKLM\System\CurrentControlSet\Services\Tcpip\Parameters\TCPWindowSize HKLM\System\CurrentControlSet\Services\Tcpip\Parameters\Interface\InterfaceGUID\TCPWindowSize Did it not implement said in the doc http://technet.microsoft.com/en-us/magazine/cc162519.aspx WHY??? Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287504
  - 13
    - Windows Built in Firewall... Howdy Folks, I have a user whos built in windows firewall is actually blocking the XP VPN client from making outgoing VPN connections. I have never before seen this behavior on the XP firewall. When the firewall is turned off the VPN goes through just fine, when it is turned on the VPN cannot establish any kind of connection. I have never come across this type of behavior with microsofts built in firewall conflicting with the default XP vpn client. Any thoughts? Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287503
  - 14
    - SLOW file copy? I have a gigabit LAN here. My machine is running Win XP Pro SP2. The other machine is running Windows 2003 R2 Server. Source drive is a 320gig Seagate SATA drive on the onboard nVidia SATA controller. It's running in 3gig mode. Target drive is actually a RAID5 array. Five 500gig SATA hard drives with lots of space to spare. When I copy a large file (4+ gig) the network utilization is less than THREE percent. This works out to about 30mbit/second or about 3.8mbyte/second. Performance is MUCH worse when transferring small files. I just downloaded NetCPS and tested the throughput of my LAN directly and utilization tops out at about 60%. This works out to 600mbit/second or 75mbyte/second. Where is all the performance being lost???? Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287502
  - 15
    - Insufficient system resources... "Insufficient system resources exist to complete the requested operation." I just started getting this error on a machine with XP Pro SP2 connected to my W2K domain whenever you try to access a network drive in Explorer or My Computer. Interestingly, I am able to use the network drive e.g. to install software by using Start | Run. The computer has 512MB RAM, and nowhere near all of it is being used. Swap file size is set to 648-1344MB in size. I tried searching on MS (Live search blows!) but the results I got back were all about Vista. One reason our company has not taken the Vista "plunge". No other XP Pro machines on our network are experiencing this issue. The network drive is our fileserver (W2K3 Standard) with a 750GB drive. Any ideas appreciated! Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287499
  - 16
    - No clock synchronization Hello: I get the following warning for both time.nist.gov and, earlier, time.windows.com: Event Type: Warning Event Source: W32Time Event Category: None Event ID: 36 Date: 4/7/2008 Time: 12:55:49 PM User: N/A Computer: HANS Description: The time service has not been able to synchronize the system time for 49152 seconds because none of the time providers has been able to provide a usable time stamp. The system clock is unsynchronized. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. When I did "Update Now" (Win XP Home) , I got an error message for time.nist.gov , but a successful synchronization for time.windows.com. I'm not sure I understand the message "The time service has not been able to synchronize the system time for 49152 seconds because none of the time providers has been able to provide a usable time stamp.". Can anyone explain it. I understand that this can also be a fire wall issue (I have Nortin Internet SecuritY). While I know that the service is called "Windows Time", I am not sure how to enable nist.gov (and I do not expect anyone here to know, since this is not a Norton site, but if you know, I would appreciate a hint). The time service is shown to start automatically, but, obviously, it times out. Any help would be appreciated. Regards Hans L Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287498
  - 17
    - Effect of Jumbo frames on 100mbit network? Most of the equipment on my LAN is running at 1000mbit/sec. I'd like to take advantage of Jumbo Frames. I have no problem setting this up on my PC's, but I'd like to know what kind of effect it will have on devices that are only 100mbit/sec capable, like my cable modem or old laptop? Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287497
  - 18
    - Mapped network drives showing in applications but not explorer All, Wondering if someone could share some wisdom on this matter i have. On my machine at present i'm linked to two different network drives, one for the company shared documents and the other for personal work. If i try and open files from either of these drives within an application (i.e. Excel) i can browse files and open them fine. However, if i open an Explorer window these drives do not appear. Can anyone assist? Thanks, Tom. Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287495
  - 19
    - Pinging 192.168.1.x IP address returns wrong IP I have a couple Windows XP Pro machines with most of the updates. I have 12 of them at remote locations. I am using Netgear's VPN client to connect to the main office for the remote locations to enter their accounting data. This has worked pretty well on several PCs. However, on a few of them, when I ping any address at 192.168.1.x, it will return ping results for 10.44.something. I don't remember the exact IP address. I did google the IP address just in case but I didn't come up with anything good. I noticed this on two machines after installing the VPN client. Interestingly enough, it happens both when connected and disconnected from the VPN. My first thought was spyware. I used ad aware and spybot on the machines with caught a little..nothing significant. But didn't fix anything. I used this WinXP TCP/IP fix program that I found on the web. I like using it for certain spyware that screws up the protocol in some way. But that did nothing. I'm pretty good at eradicating most destructive spyware. Somehow though, I still think it's spyware...but I almost want to blame the VPN software. I actually uninstalled the VPN software on one of the machines to make sure the problem would still exist. It still returned the wrong address. So, I'm stuck. I'm not sure what troubleshooting there is left to do. Pinging an IP address to me seems like the most basic test to see if TCP/IP is working. I would assume it's not DNS...since pinging an IP address shouldn't query a DNS server. Does anyone have any suggestions on what to do next? Thank you! Gary Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287489
  - 20
    - Home network and file sharing Hello Everybody, My desktop has WinXP Pro SP2 while my brother's laptop has WinXP Home. Both computers have multiple user accounts for different family members. We both share internet by using a wireless router. My brother has his accounts on both, desktop and laptop, computers. Is it possible (in a home network setup) that my brother can access only his account on desktop from his laptop? If yes then how? I have been searching this on internet for weeks but no luck so far. Thank you, -- Syed Zeeshan Haider Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287487
  - 21
    - Slow Network Logon Hello. I hope someone can help with the issues I have. Im having problems with machines taking up to 20 minutes to logon to the network, this does not affect all machines just random ones.(most machines) We have used a network sniffer to look at the traffic from the client machines and for some reason the client authenticates fine with the local domain controller, and know which site it is in, but then goes off talking to other domain controllers around the world in other sites. Im not sure if this is when it is trying to pull down the group policy, does anyone know why this would happen? Also if I ping my domain name the reply changes every so often, and its always from a DC in another country site, if we add a host entry for the local DC to the domain name it fixes the issues on some machines. Also on almost all machine I get the error in the event log "The Security System could not establish a secured connection with the server DNS/blah.blah.blah.com. No authentication protocol was available." What does this mean? I know that's all a bit random so any help would be appreciated. Thanks Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287481
  - 22
    - Networking process causes continuous hard drive activity I don't know is this info below is usable - I got from the Sysinternals Process Monitor. Sometimes it continues for hours. I saw my Hard drive constantly be used and tried this Process Monitor to figure it out - to hopefully stop it. But it's beyond my knowledge. You can see it repeats itself... Does anyone know what's going on and how to stop it? Thanks. Using XP... 50214 9:51:52.8527885 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Linkage\Bind BUFFER OVERFLOW Length: 144 50215 9:51:52.8528010 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Linkage\Bind BUFFER OVERFLOW Length: 144 50216 9:51:52.8528089 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Linkage\Bind SUCCESS Type: REG_MULTI_SZ, Length: 414, Data: \Device\ {F458D970-5D74-4333-9BE8-5B6912F61F49}, \Device \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}, \Device\{B8616C2E-4CEC-4744- A927-806C97ACCA24}, \Device\{0A0F0B98-8C0F-411E-AB8A-62225DDC3B35}, \Device\NdisWanIp 50221 9:51:52.8529681 PM Explorer.EXE 1896 RegOpenKey HKLM\SYSTEM \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50} SUCCESS Desired Access: Read 50222 9:51:52.8529941 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}\EnableDHCP SUCCESS Type: REG_DWORD, Length: 4, Data: 1 50223 9:51:52.8530053 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}\LeaseObtainedTime SUCCESS Type: REG_DWORD, Length: 4, Data: 1207619106 50224 9:51:52.8530156 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}\LeaseTerminatesTime SUCCESS Type: REG_DWORD, Length: 4, Data: 1207705506 50225 9:51:52.8530254 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}\DhcpServer SUCCESS Type: REG_SZ, Length: 24, Data: 192.168.2.1 50226 9:51:52.8530349 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}\DhcpServer SUCCESS Type: REG_SZ, Length: 24, Data: 192.168.2.1 50227 9:51:52.8530488 PM Explorer.EXE 1896 RegCloseKey HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50} SUCCESS 50228 9:51:52.8531086 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Linkage\Bind BUFFER OVERFLOW Length: 144 50229 9:51:52.8531173 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Linkage\Bind BUFFER OVERFLOW Length: 144 50230 9:51:52.8531245 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Linkage\Bind SUCCESS Type: REG_MULTI_SZ, Length: 414, Data: \Device\ {F458D970-5D74-4333-9BE8-5B6912F61F49}, \Device \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}, \Device\{B8616C2E-4CEC-4744- A927-806C97ACCA24}, \Device\{0A0F0B98-8C0F-411E-AB8A-62225DDC3B35}, \Device\NdisWanIp 50235 9:51:52.8532952 PM Explorer.EXE 1896 RegOpenKey HKLM\SYSTEM \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50} SUCCESS Desired Access: Read 50236 9:51:52.8533156 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}\EnableDHCP SUCCESS Type: REG_DWORD, Length: 4, Data: 1 50237 9:51:52.8533254 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}\LeaseObtainedTime SUCCESS Type: REG_DWORD, Length: 4, Data: 1207619106 50238 9:51:52.8533349 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}\LeaseTerminatesTime SUCCESS Type: REG_DWORD, Length: 4, Data: 1207705506 50239 9:51:52.8533450 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}\DhcpServer SUCCESS Type: REG_SZ, Length: 24, Data: 192.168.2.1 50240 9:51:52.8533545 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}\DhcpServer SUCCESS Type: REG_SZ, Length: 24, Data: 192.168.2.1 50241 9:51:52.8533667 PM Explorer.EXE 1896 RegCloseKey HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50} SUCCESS 50242 9:51:52.8533927 PM Explorer.EXE 1896 RegOpenKey HKLM\SYSTEM \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50} SUCCESS Desired Access: Query Value 50243 9:51:52.8534112 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}\AddressType SUCCESS Type: REG_DWORD, Length: 4, Data: 0 50244 9:51:52.8534232 PM Explorer.EXE 1896 RegCloseKey HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50} SUCCESS 50245 9:51:53.8528516 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Linkage\Bind BUFFER OVERFLOW Length: 144 50246 9:51:53.8528631 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Linkage\Bind BUFFER OVERFLOW Length: 144 50247 9:51:53.8528709 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Linkage\Bind SUCCESS Type: REG_MULTI_SZ, Length: 414, Data: \Device\ {F458D970-5D74-4333-9BE8-5B6912F61F49}, \Device \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}, \Device\{B8616C2E-4CEC-4744- A927-806C97ACCA24}, \Device\{0A0F0B98-8C0F-411E-AB8A-62225DDC3B35}, \Device\NdisWanIp 50252 9:51:53.8530142 PM Explorer.EXE 1896 RegOpenKey HKLM\SYSTEM \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50} SUCCESS Desired Access: Read 50253 9:51:53.8530360 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}\EnableDHCP SUCCESS Type: REG_DWORD, Length: 4, Data: 1 50254 9:51:53.8530463 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}\LeaseObtainedTime SUCCESS Type: REG_DWORD, Length: 4, Data: 1207619106 50255 9:51:53.8530561 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}\LeaseTerminatesTime SUCCESS Type: REG_DWORD, Length: 4, Data: 1207705506 50256 9:51:53.8530659 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}\DhcpServer SUCCESS Type: REG_SZ, Length: 24, Data: 192.168.2.1 50257 9:51:53.8530751 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}\DhcpServer SUCCESS Type: REG_SZ, Length: 24, Data: 192.168.2.1 50258 9:51:53.8530877 PM Explorer.EXE 1896 RegCloseKey HKLM\System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50} SUCCESS 50259 9:51:53.8531410 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Linkage\Bind BUFFER OVERFLOW Length: 144 50260 9:51:53.8531494 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Linkage\Bind BUFFER OVERFLOW Length: 144 50261 9:51:53.8531572 PM Explorer.EXE 1896 RegQueryValue HKLM\System \CurrentControlSet\Services\Tcpip\Linkage\Bind SUCCESS Type: REG_MULTI_SZ, Length: 414, Data: \Device\ {F458D970-5D74-4333-9BE8-5B6912F61F49}, \Device \{2D663155-75E9-4CAD-83EA-49FDE3D7BE50}, \Device\{B8616C2E-4CEC-4744- A927-806C97ACCA24}, \Device\{0A0F0B98-8C0F-411E-AB8A-62225DDC3B35}, \Device\NdisWanIp Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287473
  - 23
    - Slow Network Browsing - MS Office Hi there, We have a small network, w2k Server and a combination of win xp Pro desktops and notebooks all with MS Office 2003. One of the notebooks seems to freeze up for a minute when trying to browse for an attachment using Outlook, and will regularly do the same when browsing for files from Word or Excel. It doesn't seem to make a difference if connected via wireless (54Mb) or wired (100Mb) If the network is disabled. you can browse through directories with no problem, but of course no network drive. Since this is happening only on this PC I don't think it's a Server issue? Am I wrong in assuming this? I would like to just format the drive and load the OS fresh. Is there something else I should look at first? Virus patterns are up to date and a scan reports clean, using Norman Virus Control. Thanks for the input... Bob Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287468
  - 24
    - block network browse hi I m new to this group , I have a querry that I have one net LAN connection and I have made ICS for my other PC via LAN card .Now I want block/restrict some sites/browsing of my client PC, so how can I do this plz suggest me . thanks Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287466
  - 25
    - Authentication prompt when UNC into XP Pro machine from Win2K mach I have two cilent machines in a peer to peer network. One is a Win2K box (Client1) and another is a XP Pro box(Client2). They are on the same subnet mask and are able to ping each other. I have both firewalls turned off and have ensured that file sharing is enabled on both machines. Both admin accounts are named differently and currently have different passwords assigned to them. I can UNC into the Windows 2000 box from the XP Pro box without any authentication popups and can view any shares to include printers. However, when I attempt to UNC into the XP Pro box from the Win2K box, i get prompted for Authentication. On both machines, I set Digitally Sign Server/Client communications (when possible) to enabled and Digitall Sign Server/Client communications (Always) to disabled. Also I set Secure Channel: Digitally encrypt/sign secure channel data (when possible) to enabled and (Always) to disabled. My NTLM settings are Send LM and NTLM-User NTLMv2 when possible. My big question is do I have to set up like users with the same passwords on both systems in order to avoid the authentication? I know this will work, but am looking to avoid that if at all possible. Also if anyone could tell me how I am able to UNC into the Win2K box without authentication while I get hit with it UNCing into XP from Win2K, that would be excellent as well. Thank You, Boe Tag: XP, Network Drives, Disconnect Drives require a sync of offline fi Tag: 287463

Some of our XP Laptops are display a wierd behaviour where if the machine is
disconnected from the network and then reconnects the mapped drives will not
appear until the user intializes a sync of they offline files.

The staff homes drives are used with caching enabled so the files are
available at home.

This is not as seemless as we like.

Top