Browser page loads, Protocal activity

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - brief IP address question (quiz?) Hello, An using an Win XP-pro computer and was looking at some internet connection things. Could I get a few opinions on IP addresses in general, particularly the last set of digits... BACKGROUND PC I did c:\ipconfig, and it brings something back like... IP Address 190.188.1.400 Default gateway 190.188.1.4 ROUTER The router has some settings where it has a fill-in box (default=0) to allow you to ONLY fill in the last 2 digits, like this 190.188.1.4 [ 0 ] (it has a default of 0) QUESTIONS OK so questions are... Is the router IP address of 190.188.1.4 the same as 190.188.1.40? _________ the same as 190.188.1.400? _________ the same as 190.188.1.004? _________ And, when the "ipconfi" brings back 190.188.1.400, is that the same as 190.188.1.40? _________ the same as 190.188.1.4? _________ the same as 190.188.1.004? _________ And, is the default gateways always the same (or a variation of ) the OP address, i.e. is the default gateway of 190.188.1.4 the same as 190.188.1.400? ___ (if so, why don't they put the 2 zero's here too?) ____ Thanks, George Tag: Browser page loads, Protocal activity Tag: 287003
  - 2
    - Remote Desktop locks up local computer I am running RDP on my local XP pro machine (box 1). I connect to it by running the remote desktop client on another XP pro machine (box 2) on my LAN. Most of the time when I log off the remote session I cannot access box 1 from the keyboard, and the screen is blank. CNTL, ATL, DEL does not return the login prompt. So far, the only solution I have been able to do is shut down the computer and restart it. Are there any suggestions I can try to correct this problem? Thanks, Jim Tag: Browser page loads, Protocal activity Tag: 287002
  - 3
    - Problem with IE 7 Settings using GPO Hi I am trying to set proxy setting in IE 7, using a GPO. I tryed to install the Administrative Templates for Internet Explorer 7 for Windows om my DC. And then made a GPO. Then settings are only applyed on pc's with IE 6, why is that? Tag: Browser page loads, Protocal activity Tag: 287000
  - 4
    - IE7 Setup Issue Hello, I'm trying to set up a PC with Windows XP Professional and I tried to install IE7 on it. It installed fine, but when I click on the IE7 icon (after reboot) I can't access the internet at all. The browser never opens. I have a laptop running Windows XP Pro and it works just fine. However, my desktop cannot seem to run IE7 for some reason. Tag: Browser page loads, Protocal activity Tag: 286999
  - 5
    - PPP LCP Failure Wondering if anyone has seen this error before. Trying to do a remote vpn and LCP Configuration Ack does not seem to make it to PPP procotol module. Do not see the expected LCP Configuration Reject being sent out by my Windows PC No. Time Source Destination Protocol Info 2 0.043531 172.31.128.101 69.28.109.6 TCP abbaccuray > pptp [SYN] Seq=0 Win=65535 Len=0 MSS=1260 3 0.072123 69.28.109.6 172.31.128.101 TCP pptp > abbaccuray [SYN, ACK] Seq=0 Ack=1 Win=16384 Len=0 MSS=1260 4 0.072325 172.31.128.101 69.28.109.6 PPTP Start-Control-Connection-Request 5 0.105621 69.28.109.6 172.31.128.101 PPTP Start-Control-Connection-Reply 6 0.105805 172.31.128.101 69.28.109.6 PPTP Outgoing-Call-Request 7 0.141172 69.28.109.6 172.31.128.101 PPTP Outgoing-Call-Reply 8 0.153732 172.31.128.101 69.28.109.6 PPTP Set-Link-Info 9 0.161355 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 10 0.192301 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 11 0.192980 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 12 0.374693 69.28.109.6 172.31.128.101 TCP pptp > abbaccuray [ACK] Seq=189 Ack=349 Win=65187 Len=0 18 2.158080 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 19 2.187140 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 20 2.188008 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 21 5.157873 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 22 5.194315 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 23 5.196655 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 24 9.157625 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 25 9.187456 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 26 9.188081 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 27 13.157421 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 28 13.187020 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 29 13.187604 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 32 17.157088 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 33 17.187017 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 34 17.187637 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 35 21.156816 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 36 21.186313 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 37 21.186921 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 44 25.169259 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 45 25.186137 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 46 25.198339 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 49 29.156329 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 50 29.185440 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 51 29.186276 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 52 33.156013 172.31.128.101 69.28.109.6 PPP LCP Configuration Request 53 33.185937 69.28.109.6 172.31.128.101 PPP LCP Configuration Ack 54 33.186540 69.28.109.6 172.31.128.101 PPP LCP Configuration Request 55 37.155785 172.31.128.101 69.28.109.6 PPTP Call-Clear-Request 56 37.192656 69.28.109.6 172.31.128.101 PPTP Call-Clear-Request 57 37.192782 172.31.128.101 69.28.109.6 PPTP Call-Disconnect-Notify 58 37.224889 69.28.109.6 172.31.128.101 TCP pptp > abbaccuray [ACK] Seq=205 Ack=513 Win=65023 Len=0 59 37.225069 172.31.128.101 69.28.109.6 PPTP Stop-Control-Connection-Request 60 37.252977 69.28.109.6 172.31.128.101 PPTP Stop-Control-Connection-Reply 61 37.291536 172.31.128.101 69.28.109.6 TCP abbaccuray > pptp [FIN, ACK] Seq=529 Ack=221 Win=65315 Len=0 62 37.319252 69.28.109.6 172.31.128.101 TCP pptp > abbaccuray [FIN, ACK] Seq=221 Ack=530 Win=65007 Len=0 63 37.319419 172.31.128.101 69.28.109.6 TCP abbaccuray > pptp [ACK] Seq=530 Ack=222 Wi Tag: Browser page loads, Protocal activity Tag: 286997
  - 6
    - Protecting shared files on XP SP2 home Well, I know it *supposedly* can't be done with a password, but I've heard of ways to do it and I was wondering if anyone could give me some ideas. Basically, there's one computer I want to be able to access the files. It's OS X Tiger, and will always have the same IP address. All other computers When I mount a share, it asks for a password, but, like I believe all XP systems are, any password will open the files. So I just need anything to keep access to that one computer. I've heard about setting a password on the guest account, but that doesn't seem possible. Also tried making a rule on my router's firewall, but that didn't work. Is there any way to set up the Windows Firewall for this? Any suggestions would be appreciated! Thanks, frosty Tag: Browser page loads, Protocal activity Tag: 286996
  - 7
    - My wireless usb card lost in network connections but it works *hi,recently i installed ufasoft sniffer to my computer,and while i was struggling with the software, suddenly my notebook was restarted,and it turned on again,but when i open network connections i cannot see my wireless philips usb, it disappeared,but it is shown in device manager,and it works. i installed its own software so it works,but i don't want to use that software,i want to use original xp wireless system, because with its own software i cannot change my ip, i couldn't understand anything,my pc is connected to internet but there is no proof of it :( please help mee...* Tag: Browser page loads, Protocal activity Tag: 286993
  - 8
    - Use a Server or one of my Pc's Hi I have 3 PC's that are already Share a internet connection running XP Pro. One of the PC's has an accounts program called TAS Books installed. We want one of the other PC's to run TAS Books as well so that 2 people can work on the program at the same time. Will it be easier to buy a server? Would i need to install Windows server 2003? If so what PC's would need windows server on? Or can i use the third PC as the server? Thanks in advance Glenn -- pele35uk Tag: Browser page loads, Protocal activity Tag: 286989
  - 9
    - Windows Domain Logon Fail I change my windows domain password when my pc was connected to our corporate network. When I was offline, I was not able to log on again. How to be able to login without reconnect to the corporate network ? Tag: Browser page loads, Protocal activity Tag: 286987
  - 10
    - How can I scan this hdd remotely My Desktop is connected by ethernet cable to the router and the Labtop wireless. Both can ping each other.I set the hdd of the LTop to 'shared' and have the 'hand' sharing logo on it. However I can't see it from the Desktop. Is it possible to scan the LT hdd from the Desktop? Many thanks for your help. Tag: Browser page loads, Protocal activity Tag: 286985
  - 11
    - Access same file on 2 XP home PCs? My basic setup is - XP home, contains Word document XP home On my second XP box, without the Word document, please can you tell me how I can view/edit the document on the first box? The machines are in the same room. Machine 1 has two ethernet connections on the mobo, one is used for the internet, the other is free. Machine 2 will have a USB ethernet adapter device installed soon. Using my very limited understanding about networks, I'm thinking along the lines of some kind of simple ethernet cable running between the two machines, but I've heard that XP Pro has all the networking type stuff and perhaps as I have XP Home only, I may be out of luck? Thanks a lot for any advice, best regards from Robert. Tag: Browser page loads, Protocal activity Tag: 286980
  - 12
    - DEAR I AM A STUDENT LIKE YOU .BUT LAST WEEK I HAVE EARN MORE THAN DEAR I AM A STUDENT LIKE YOU .BUT LAST WEEK I HAVE EARN MORE THAN $2,00,000 WITH THE HELP OF INTERNET. I WILL SHOW YOU HOW TO MAKE IT WITHOUT INVEST ANYTHING.THE LINK ID BELOW www.jeeva235.blogspot.com MILLIOANS OF DOLLARS ARE WAITING HERE Tag: Browser page loads, Protocal activity Tag: 286979
  - 13
    - The "Browser war" is over As far as I'm concerned with IETab (google it) the browser war is coming to an end. Now we just want a firefox extension called FiefoxTab! The IE8 team is also doing great stuff. What about an HTML directive (meta tag) which dictates a preferred rendering engine? And useragent lists 'em all in order... Greetings, Nick Tag: Browser page loads, Protocal activity Tag: 286978
  - 14
    - half bandwidth I've updated my adsl from 2Mb/s to 12Mb/s. Since that I'm experiencing some problems. I have in fact +- 1250KB/s bandwidth, tested in other PC's in the network, but on the my main PC, the Win XP only can deal with 700KB/s tested with one connection. If I use two or more silmultaneous connctions to the same file I achieve the total bandwidth. In this Pc I have also Linux installed so I tested with it and I have the total but not in Win XP. I tried without firewall and same result. I tried all I know and I am sure that all the hardware are allright, my feeling is there is something in Win which is causing the bandwidth crisis but I don't know what is it. Tag: Browser page loads, Protocal activity Tag: 286977
  - 15
    - Transferring data from a laptop to a pc Forgive my primitive question. I would like to know what type of cable I would need to transfer data( photos and files) from a Dell Inspirion laptop to a home pc on a daily basis. I would like to take a laptop into the field to do photoshoots and come home a plug into the same pc to do my editing. I'm not intrested in wireless or transferring all the info on the hard drive,or setting up a network at this time.Both machines are running XP. Thanks in advance. Tag: Browser page loads, Protocal activity Tag: 286974
  - 16
    - Network Connections dialogue box When my broadband wasn't working, I used dialup (as you do), and since broadband 's been repaired, I keep getting a 'Network Connections' window popping up when I visit certain sites - only in Firefox, strangely, asking me which dialup connection I want to connect to. The whole web grinds to a halt unless I click cancel or the red cross. I've been through every possibility I can think of in the 'Options' part of Firefox and in the 'Network Connections' set up, but the little window just will not quit turning up. It's not affecting the speed of the connection, but is just irritating. Anyone any ideas? Tag: Browser page loads, Protocal activity Tag: 286973
  - 17
    - Offline Folders sometimes work I have got a very sophisticated probleme with offline folders. I use offline folders assigned manually. If I assign folders from the folders tree root, everything is working, but if i want to exclude some subfolders, the wohole thing is getting weird. Other files created in totally different subfolders werenÂ´t added to the offline folders anymore, even if the folder is manually added to the offline files. Only adding the new file itself manually does work. But is useless to say that my collegues and me are adding a lots of files during the whole day, and i canÂ´t say which of them i should add and which schouldnÂ´t add. Can someone solve this heritage problem?? Tag: Browser page loads, Protocal activity Tag: 286972
  - 18
    - Two IP addresses on one computer I have a desktop that is hooked up to my work LAN. We also have a wireless LAN at my office. If I plug in a wireless USB adapter to use on the public wireless network and disable the LAN will that change my IP address? I would like to be able to check my email at work. Thanks in advance Tag: Browser page loads, Protocal activity Tag: 286961
  - 19
    - Printer/File Sharing No Longer Working I work in a small office. We have three computers (two desktop and one laptop, all using Windows XP). Due to the layout of the office, the printers are both connected to one desktop. We can all connect to the internet with no problems, but as of Wednesday we are no longer able to connect to the other computers (shared files, printer, etc). I have run the network set up wizard multiple times on each computer, trying to get it to work, but without success. The computers are able to ping each other, and I have confirmed that they all have the same network name. File and printer sharing IS enabled. We can each connect to the internet with no problems (secure network), but they no longer wish to speak to each other. This is NOT the first time this has happened, but I was able to get things to work properly before. Now, for whatever reason, I can't. Any ideas or suggestions on what I can do to correct this? Tag: Browser page loads, Protocal activity Tag: 286956
  - 20
    - statas bar disappears when opening ie window hello I am having trouble with my status bar/taskbar ( the one that is usually at the bottom of the screen) it disappears when I open internet explorer 6. It is visable when i am using outlook or office, This just happened yesterday when I dropped my mouse, eveything change, (the status/taskbar went vertical from top to bottom on the left hand side and my windows became only 3 inches wide) and I was able to fix all of it except this status bar/taskbar problem. I have done the common stuff like make sure the status bar is checked (with the toolbar unlocked)in ie6 and on my computer. Any suggestions and help will be greatly appreciated . Thankyou in advance Bobby Tag: Browser page loads, Protocal activity Tag: 286955
  - 21
    - Help with new network I would like to set up a small business network. I am looking for some advice, should i purchase four great computers and XP Pro, or get a server with XP pro on the computers. Right now I am peer to peer with Xp home and older computers, it is starting to become an issue. Also I presume I would be better off wired since the lines are already there? I would like to move in the future though so wireless may be nice. Any advice would be appreciated. -- Tony Brown Tag: Browser page loads, Protocal activity Tag: 286949
  - 22
    - XP Home Networking Error My notebook and desktop (both XP Home) are on the same Workgroup yet I cant get it to work in Home Networking!!! What can I do Tag: Browser page loads, Protocal activity Tag: 286945
  - 23
    - Can XP Home join a domain? Hello, I want to ask if there is someone who knows how to join a domain in XP Home. I already know that it is in general impossible to join a domain in XP Home, but I also have heard that there exist some tricks to do it. Also I have heard that there are programs (like X-setup Pro) that can be used. However, I have tried X- setup Pro...but I had no great result with it. So, I want ask here if somebody can help me ! Please ? Tag: Browser page loads, Protocal activity Tag: 286938
  - 24
    - Wobbly network bridge Current setup is: (Internet) - Router - Lan - PC - WLan - PDA PC has Lan + WLan bridged The PDA gets an IP address from the router which is serving out DHCP, so the wlan connection would seem to be working, but the PDA can't ping either the PC or the router and vice-versa. Tag: Browser page loads, Protocal activity Tag: 286932
  - 25
    - Domain Network Refresh we are having a Active Directory based network on windows 2003 many users can not use internet or access LAN, shared drives and printers, even they are not accessible from domain controller nor remote desktop can be used until the repair their network connection action is performed, here are the details 1) Server 2003 SP1 (AD) 2) DHCP enabled 3) traffic goes through ISA 2000 4) Clients are Windows XP Pro SP2 (domain user account is restricted user account on local machine not administrator of local machine) is there any policy settings which can do a network refresh or repair on whole domain on regular bases or some method, script or batch file to do so as some user have restricted account on local computer to prevent Installation of new softwares and changing certain settings, so they are not able to repair network settings. they have to either do a logoff or reboot for the internet to work or share LAN shared drivers. please someone help me as this is drawing me nuts every morning when users starts their pc's in the morning and i have to run to their desks please help Thanx Bikram Tag: Browser page loads, Protocal activity Tag: 286929
- Next
  - 1
    - Unclear browstat Output At one time, I only had one XP Pro and one XP Home machine on the LAN, along with three Win98SE and 1 Win2K machine. When the XP Pro machine would try to map to any of the older machines, it did so with no problems. When I tried to map to the XP Home machine, Explorer crashed, reset, and I had to reboot to get back to full operation. I have since added another XP Pro machine, and have the same issues. I found articles that indicated that mine might be a browser issue. I ran browstat, and found that this machine has the Master browser, but then the browstat result indicates that I do not, and only pulls up one win 98 machine. For example, the machine is ERELKES3, no domain, workgroup=WORKGROUP C:\HOLD\Browstat>BROWSTAT STATUS Status for domain WORKGROUP on transport \Device\NetBT_Tcpip_{1BAB579C-9DA0-491F -9E1C-01699ECE7AC1} Browsing is active on domain. Master browser name is: ERELKES3 Master browser is running build 2600 1 backup servers retrieved from master ERELKES3 \\P3450 Unable to retrieve server list from ERELKES3: 71 Status for domain WORKGROUP on transport \Device\NetBT_Tcpip_{E4F6E2F0-8874-4EB6 -AB59-A4F62D992887} Browsing is NOT active on domain. Master browser name is held by: ERELKES3 Master browser is running build 2600 Any thoughts? -- ed Tag: Browser page loads, Protocal activity Tag: 286928
  - 2
    - windows management instrumentation (wmi) possibly corrupted when I open the advanced tab within the wireless network connection settings it says that the windows management instrumentation (wmi) information might be corrupted and that I should use system restore to correct the issue. I have not been able to succeed using this approach. Any other suggestions? Thanks Tag: Browser page loads, Protocal activity Tag: 286926
  - 3
    - Outlook cannot connect to server I am running Outlook 2003 and it keeps saying it can't connect to the server for hotmail. How do I configure it manually, I don't know the server address. Tag: Browser page loads, Protocal activity Tag: 286925
  - 4
    - NetBios over TCP/IP Hello, I'm sorry if my English isn't so good, I hope it's good enough to explain my problem. What I have got: - A LAN with winXP machines behind a router - The router is connected to the Internet - A lan drive (samba server) is connected to the router DHCP is disabled. When I am in the LAN I can browse the lan drive through NetBT typing \\landrivename in the address bar. I want to do the same using a remote PC anywhere over the Internet and a dynamic DNS. What I done: - activated a DDNS service - configured the router to forward: UDP 137:139 and TCP 139 to the lan drive I don't know how to tell IE (or other browsers) to use NetBT protocols. If I type: "myip.ddns.address" the browser assumes it's an http request and hence uses the port 80. In this case the router administration page will answer. smb:\\myip.ddns.address doesn't work as well as myip.ddns.address:139 I'd try to do a request on a port and configure the router to forward on another one. But I'm afraid I can't do this in my digicom router. Maybe there is a straight way but I can't see it. Please, may you help me? Thanks Marco / iw2nzm Tag: Browser page loads, Protocal activity Tag: 286919
  - 5
    - Network connection Windows Adv 2000 server and wkstn using xp home I teach a computer lab in an elementary school. We have a server with Windows Advanced Server 2000. Our workstations are XP Home edition (don't ask me why). I have set up two different users in the lab, both with admin permissions. My question is on one user account at a workstation, I can access our server without having to go through a login/password window. On the same workstation, under the other user account it asks me to give a login and password before connecting to the server. I am no expert with the server (nor the workstations for that matter). There are several folders on the server which are shared that I cannot see. I am baffled. Thanks in advance for the help. --Sytkeepr Tag: Browser page loads, Protocal activity Tag: 286917
  - 6
    - Networking > 9 Users I am trying to have more than 9 users on the microsoft network. We have a T-1 with a router and a 16 port switch. All computers/network printers have been running fine. We've tried to add a 10th computer to the network and the computer only has limited connectivity and does not find the workgroup. Talked to the T-1 and router people....they say it's not a problem with their equipment. When we plugged the 10th computer into the switch...all the lights light...meaning no problems with the switch. Does the microsoft network have a quantity limitation or some license only up to 10 users? Please help. Tag: Browser page loads, Protocal activity Tag: 286915
  - 7
    - workgroup and domain connectivity Hi i have dlink router and 2 computers at my home how can i put both of them in a workgroup or domain so we have some commaon folders to access wirelessly i know it is possible thru cables but how can i do it if i have a wireless router connected to both the computers Tag: Browser page loads, Protocal activity Tag: 286911
  - 8
    - connecting 2 computers thru cross cable hi i tried to connect my two laptops having WIN XP thru a cross cable and i made a shared folder on the laptop but it doenot show in my network places -microsoft windows network i dont see anything of the other laptop though i see the ethernet adapter are connected by the cross cable what could be the possible reason for that?? please help Thanks Tag: Browser page loads, Protocal activity Tag: 286910
  - 9
    - Increasing the UDP-buffer Hello together, I have a problem with my UDP-connection. I want to create a UDP-connection via an Gigabit-Ethernet-cable. For that purpose I tested the UDP-performance between two WinXP-systems with netperf, iperf and a self-made test-utility. The problem is: I got only 150 to 170Mbit with UDP but 420MBit with TCP. How is that possible? Could this cause by a low value of a UDP-buffer. At any Unix-system it's possible to adapt this value: http://www.29west.com/docs/THPM/udp-buffer-sizing.html How can I do this on a WindowsXP-system? By the way: while my testings the CPU-usage was at approximately 55% (if taskmanager works properly) so I don't think that the performance is the bottleneck. Can anybody help me? thank you Sincerely pugs Tag: Browser page loads, Protocal activity Tag: 286909
  - 10
    - Reporting broken important URL at website shell.windows.com one of important pages at URL http://shell.windows.com/fileassoc/fileassoc.asp?Ext=mp3 (example of URL) reports 404 error â?? page not found. Previous page was redirecting visitor to http://search.live.com/results.aspx?q=file+extension+mp3, where the â??mp3â?? extension was used in both URLs. You can get to this URL from any Windows XP and Vista, if you trying to open any file in explorer with "Open with..." context menu, will appears dialog window. At bottom of this window is blue link with text "find appropriate application for this extension at web"... after clicking 404 page appears. 3 days back it was working correctly. Can you please forward this report to website administrator of shell.windows.com? Thank you in advance. ---------------- This post is a suggestion for Microsoft, and Microsoft responds to the suggestions with the most votes. To vote for this suggestion, click the "I Agree" button in the message pane. If you do not see the button, follow this link to open the suggestion in the Microsoft Web-based Newsreader and then click "I Agree" in the message pane. http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx?mid=9eebeef4-db5c-473c-a83b-f6f877bcdef5&dg=microsoft.public.windowsxp.network_web Tag: Browser page loads, Protocal activity Tag: 286908
  - 11
    - Cannot setup network When i try to setup a network i tick Client Qos File TCP/IP Every time i click OK i get the message - Your current selection will also disable the following components: Client for Ms networks File and print sharing for Ms networks Are you sure you want to disable these components? Only Qos and TCP/IP remain ticked, client and file have been cleared. How can i fix this? I have un/reinstalled client, Qos and file with no change. Help needed please. Tag: Browser page loads, Protocal activity Tag: 286904
  - 12
    - mapping a drive hey all, can someone please show me how to map a network drive thru the command line tool where the drive will show up when you look in windows explorer? thanks, rodchar Tag: Browser page loads, Protocal activity Tag: 286903
  - 13
    - IIS I am running WinXP SE: How do I find out whether I've got IIS installed or not? Thanx. or Tag: Browser page loads, Protocal activity Tag: 286899
  - 14
    - Troubleshooting scan shows failure with Ethernet card, please help Hello. My pc runs XP (pro) media edition. Display has all nvidia, including ethernet card, IDE drivers, etc. I have been unable to FAX successfully from my computer as I used to, and unable to view the status of my connections, which I also used to be able to view. A few months ago I had multiple trojans, and spyware, even with the programs to combat these on my computer. I have worked very hard to clean this up, and now my pc is running very well other than the networking issues. Last night I ran a diagnostic networking scan, which showed failure with the 10/100 Fast Ethernet Card. I am going to try to attach the scan results, in the hope that someone will be able to help me figure out how to correct the above issues before I lose my mind. Although there are several generic modems listed below, I have Verizon FIOS internet, tv and phone that all connect to a router. Thank you in advance for your time and help. Kindest regards, Cindy Internet Service + Default Outlook Express Mail incoming.verizon.yahoo.net / outgoing.verizon.yahoo.net FAILED InBoundMailPort = 110 + InBoundMailServer = incoming.verizon.yahoo.net (FAILED) Ping request could not find host incoming.verizon.yahoo.net. Please check the name and try again. InBoundMailType = POP3 Unable to connect to incoming.verizon.yahoo.net port 110 OutBoundMailPort = 25 + OutBoundMailServer = outgoing.verizon.yahoo.net (FAILED) Ping request could not find host outgoing.verizon.yahoo.net. Please check the name and try again. OutBoundMailType = SMTP Unable to connect to outgoing.verizon.yahoo.net port 25 Default Outlook Express News Not Configured Internet Explorer Web Proxy Not Configured Computer Information + Computer System YOUR-4DACD0EA75 AdminPasswordStatus = 3 AutomaticResetBootOption = TRUE AutomaticResetCapability = TRUE BootROMSupported = TRUE BootupState = Normal boot Caption = YOUR-4DACD0EA75 ChassisBootupState = 3 CreationClassName = Win32_ComputerSystem CurrentTimeZone = -240 DaylightInEffect = TRUE Description = AT/AT COMPATIBLE Domain = MSHOME DomainRole = 0 EnableDaylightSavingsTime = TRUE FrontPanelResetStatus = 3 InfraredSupported = FALSE KeyboardPasswordStatus = 3 Manufacturer = HP Pavilion 061 Model = ER900AA-ABA a1430n Name = YOUR-4DACD0EA75 NetworkServerModeEnabled = TRUE NumberOfProcessors = 2 + OEMStringArray bid=62NAemMPA1;ARDY;C_MOJ;DVDP_STD;IS.N60d;KBDRV;LScribe;MDVD_ST D;MSENC;MSMON_STD;PROD_MSWORKS;QUIF_NUE;RP_STD;SDMED_PLS;SFCHK;. aN;## PartOfDomain = FALSE PauseAfterReset = -1 PowerOnPasswordStatus = 3 PowerState = 0 PowerSupplyState = 3 PrimaryOwnerName = Cynthia Mericle ResetCapability = 1 ResetCount = -1 ResetLimit = -1 + Roles LM_Workstation LM_Server Print NT Potential_Browser Master_Browser Status = OK + SupportContactDescription HP Customer Care Centers provide support for basic Windows XP questions. Please refer to the Warranty and Support Guide for complete support information in your country. (empty) (empty) In the United States, call 800-474-6836, (empty) Support is available 24 hours per day, 7 days per week, and 365 days a year. SystemStartupDelay = 3 + SystemStartupOptions "Windows XP Media Center Edition" /noexecute=optin /fastdetect /usepmtimer "Microsoft Windows Recovery Console" /cmdcons SystemStartupSetting = 0 SystemType = X86-based PC ThermalState = 3 TotalPhysicalMemory = 3152523264 UserName = YOUR-4DACD0EA75\HP_Administrator WakeUpType = 6 + Operating System Microsoft Windows XP Professional BootDevice = \Device\HarddiskVolume1 BuildNumber = 2600 BuildType = Multiprocessor Free Caption = Microsoft Windows XP Professional CodeSet = 1252 CountryCode = 1 CreationClassName = Win32_OperatingSystem CSCreationClassName = Win32_ComputerSystem CSDVersion = Service Pack 2 CSName = YOUR-4DACD0EA75 CurrentTimeZone = -240 DataExecutionPrevention_32BitApplications = TRUE DataExecutionPrevention_Available = TRUE DataExecutionPrevention_Drivers = TRUE DataExecutionPrevention_SupportPolicy = 2 Debug = FALSE Description = CINDY Distributed = FALSE EncryptionLevel = 168 ForegroundApplicationBoost = 2 FreePhysicalMemory = 2330748 FreeSpaceInPagingFiles = 3808832 FreeVirtualMemory = 2054200 InstallDate = 1:47:11 AM 03/23/2007 LargeSystemCache = 0 LastBootUpTime = 6:44:53 PM 03/10/2008 LocalDateTime = 2:07:29 AM 03/11/2008 Locale = 0409 Manufacturer = Microsoft Corporation MaxNumberOfProcesses = -1 MaxProcessMemorySize = 2097024 Name = Microsoft Windows XP Professional|C:\WINDOWS|\Device\Harddisk0\Partition1 NumberOfProcesses = 49 NumberOfUsers = 2 OSLanguage = 1033 OSType = 18 Primary = TRUE ProductType = 1 QuantumLength = 0 QuantumType = 0 RegisteredUser = Cynthia Mericle SerialNumber = 76487-OEM-0011903-00803 ServicePackMajorVersion = 2 ServicePackMinorVersion = 0 SizeStoredInPagingFiles = 4388668 Status = OK SuiteMask = 272 SystemDevice = \Device\HarddiskVolume1 SystemDirectory = C:\WINDOWS\system32 SystemDrive = C: TotalVirtualMemorySize = 2097024 TotalVisibleMemorySize = 3078636 Version = 5.1.2600 WindowsDirectory = C:\WINDOWS + Version 5.1.2600 Version = 5.1.2600 BuildVersion = 2600.0000 Modems and Network Adapters - Modems + Agere Systems PCI-SV92PP Soft Modem AttachedTo = COM3 BlindOff = X4 BlindOn = X3 Caption = Agere Systems PCI-SV92PP Soft Modem CompressionOff = %C0 CompressionOn = %C1 ConfigManagerErrorCode = 0 ConfigManagerUserConfig = FALSE ConfigurationDialog = modemui.dll CountrySelected = United States CreationClassName = Win32_PotsModem + DCB 28 0 0 0 0 194 1 0 21 32 0 0 0 0 + Default 60 0 0 0 0 0 0 0 0 0 Description = Agere Systems PCI-SV92PP Soft Modem DeviceID = PCI\VEN_11C1&DEV_0620&SUBSYS_062011C1&REV_00\4&DC268A3&0&5080 DeviceType = Internal Modem DriverDate = 8:00:00 PM 10/29/2007 ErrorControlForced = \N4 ErrorControlOff = \N1 ErrorControlOn = \N3 FlowControlHard = &K3 FlowControlOff = &K0 FlowControlSoft = &K4 InactivityScale = "3c000000" InactivityTimeout = 0 Index = 0 MaxBaudRateToSerialPort = 115200 Model = Agere Systems PCI-SV92PP Soft Modem ModemInfPath = oem101.inf ModemInfSection = AGERE_PCI_PP ModulationBell = B1B16B2 ModulationCCITT = B0B15B2 Name = Agere Systems PCI-SV92PP Soft Modem PNPDeviceID = PCI\VEN_11C1&DEV_0620&SUBSYS_062011C1&REV_00\4&DC268A3&0&5080 PortSubClass = "02" PowerManagementSupported = FALSE Prefix = AT + Properties 192 1 0 0 255 0 0 0 255 0 0 0 7 0 0 0 ProviderName = Agere Pulse = P Reset = AT&F ResponsesKeyName = Agere Systems PCI-SV92PP Soft Modem::Agere::Agere SpeakerModeDial = M1 SpeakerModeOff = M0 SpeakerModeOn = M2 SpeakerModeSetup = M3 SpeakerVolumeHigh = L3 SpeakerVolumeLow = L0 SpeakerVolumeMed = L2 Status = OK StatusInfo = 3 SystemCreationClassName = Win32_ComputerSystem SystemName = YOUR-4DACD0EA75 Terminator = Tone = T + Motorola USB Modem AttachedTo = COM4 Caption = Motorola USB Modem ConfigurationDialog = modemui.dll CountrySelected = United States CreationClassName = Win32_PotsModem + DCB 28 0 0 0 0 132 3 0 21 32 0 0 0 0 + Default 0 0 0 0 0 0 0 0 0 0 Description = Motorola USB Modem DeviceID = Modem0 DeviceType = External Modem DriverDate = 8:00:00 PM 03/21/2006 FlowControlHard = +IFC=2,2 FlowControlOff = +IFC=0,0 FlowControlSoft = +IFC=1,1 InactivityScale = "3c000000" Index = 1 MaxBaudRateToSerialPort = 115200 Model = Motorola USB Modem ModemInfPath = oem93.inf ModemInfSection = USBMOTOROLA_COMMON Name = Motorola USB Modem PortSubClass = "02" PowerManagementSupported = FALSE Prefix = AT + Properties 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ProviderName = Motorola Pulse = P Reset = AT ResponsesKeyName = Motorola USB Modem::Motorola::Motorola Status = Unknown StatusInfo = 2 SystemCreationClassName = Win32_ComputerSystem SystemName = YOUR-4DACD0EA75 Terminator = Tone = T + Standard Modem AttachedTo = COM3 Caption = Standard Modem ConfigManagerErrorCode = 0 ConfigManagerUserConfig = FALSE ConfigurationDialog = modemui.dll CountrySelected = United States CreationClassName = Win32_PotsModem + DCB 28 0 0 0 0 194 1 0 21 32 0 0 0 0 + Default 0 0 0 0 0 0 0 0 0 0 Description = Standard Modem DeviceID = ROOT\MODEM\0000 DeviceType = External Modem DriverDate = 8:00:00 PM 06/30/2001 Index = 2 MaxBaudRateToSerialPort = 115200 Model = Standard Modem ModemInfPath = mdmgen.inf ModemInfSection = Gen Name = Standard Modem PNPDeviceID = ROOT\MODEM\0000 PortSubClass = "02" PowerManagementSupported = FALSE Prefix = AT + Properties 128 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ProviderName = Microsoft Pulse = P Reset = ATZ ResponsesKeyName = Standard Modem::(Standard Modem Types)::Microsoft Status = OK StatusInfo = 3 SystemCreationClassName = Win32_ComputerSystem SystemName = YOUR-4DACD0EA75 Terminator = Tone = T + Standard Modem AttachedTo = COM3 Caption = Standard Modem ConfigManagerErrorCode = 0 ConfigManagerUserConfig = FALSE ConfigurationDialog = modemui.dll CountrySelected = United States CreationClassName = Win32_PotsModem + DCB 28 0 0 0 0 194 1 0 21 32 0 0 0 0 + Default 0 0 0 0 0 0 0 0 0 0 Description = Standard Modem DeviceID = ROOT\MODEM\0001 DeviceType = External Modem DriverDate = 8:00:00 PM 06/30/2001 Index = 3 MaxBaudRateToSerialPort = 115200 Model = Standard Modem ModemInfPath = mdmgen.inf ModemInfSection = Gen Name = Standard Modem #2 PNPDeviceID = ROOT\MODEM\0001 PortSubClass = "02" PowerManagementSupported = FALSE Prefix = AT + Properties 128 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ProviderName = Microsoft Pulse = P Reset = ATZ ResponsesKeyName = Standard Modem::(Standard Modem Types)::Microsoft Status = OK StatusInfo = 3 SystemCreationClassName = Win32_ComputerSystem SystemName = YOUR-4DACD0EA75 Terminator = Tone = T + Motorola USB Modem AttachedTo = COM5 Caption = Motorola USB Modem ConfigurationDialog = modemui.dll CountrySelected = United States CreationClassName = Win32_PotsModem + DCB 28 0 0 0 0 132 3 0 21 32 0 0 0 0 + Default 0 0 0 0 0 0 0 0 0 0 Description = Motorola USB Modem DeviceID = Modem1 DeviceType = External Modem DriverDate = 8:00:00 PM 03/21/2006 FlowControlHard = +IFC=2,2 FlowControlOff = +IFC=0,0 FlowControlSoft = +IFC=1,1 InactivityScale = "3c000000" Index = 4 MaxBaudRateToSerialPort = 115200 Model = Motorola USB Modem ModemInfPath = oem93.inf ModemInfSection = USBMOTOROLA_COMMON Name = Motorola USB Modem #2 PortSubClass = "02" PowerManagementSupported = FALSE Prefix = AT + Properties 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ProviderName = Motorola Pulse = P Reset = AT ResponsesKeyName = Motorola USB Modem::Motorola::Motorola Status = Unknown StatusInfo = 2 SystemCreationClassName = Win32_ComputerSystem SystemName = YOUR-4DACD0EA75 Terminator = Tone = T - Network Adapters FAILED - [00000001] HP EN1207D-TX PCI 10/100 Fast Ethernet Adapter (FAILED) Caption = [00000001] HP EN1207D-TX PCI 10/100 Fast Ethernet Adapter DatabasePath = %SystemRoot%\System32\drivers\etc + DefaultIPGateway = 192.168.1.1(Same Subnet) (PASSED) Pinging 192.168.1.1 with 32 bytes of data: Reply from 192.168.1.1: bytes=32 time<1ms TTL=0 Reply from 192.168.1.1: bytes=32 time<1ms TTL=0 Reply from 192.168.1.1: bytes=32 time<1ms TTL=0 Reply from 192.168.1.1: bytes=32 time<1ms TTL=0 Ping statistics for 192.168.1.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss) Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms Description = NVIDIA nForce Networking Controller - Packet Scheduler Miniport DHCPEnabled = TRUE DHCPLeaseExpires = 1:16:28 AM 09/15/2005 DHCPLeaseObtained = 1:16:28 AM 08/31/2005 + DHCPServer = 16.92.3.250 (FAILED) Pinging 16.92.3.250 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 16.92.3.250: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss) DNSDomain = americas.hpqcorp.net DNSEnabledForWINSResolution = FALSE DNSHostName = your-4dacd0ea75 + DNSServerSearchOrder (FAILED) + 16.92.3.242 (FAILED) Pinging 16.92.3.242 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 16.92.3.242: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss) + 16.92.3.243 (FAILED) Pinging 16.92.3.243 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 16.92.3.243: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss) + 16.81.3.243 (FAILED) Pinging 16.81.3.243 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 16.81.3.243: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss) + 16.118.3.243 (FAILED) Pinging 16.118.3.243 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 16.118.3.243: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss) DomainDNSRegistrationEnabled = FALSE FullDNSRegistrationEnabled = TRUE GatewayCostMetric = 20 Index = 1 + IPAddress = 192.168.1.2 (PASSED) Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.2: bytes=32 time<1ms TTL=0 Reply from 192.168.1.2: bytes=32 time<1ms TTL=0 Reply from 192.168.1.2: bytes=32 time<1ms TTL=0 Reply from 192.168.1.2: bytes=32 time<1ms TTL=0 Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss) Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms IPConnectionMetric = 20 IPEnabled = TRUE IPFilterSecurityEnabled = FALSE IPSubnet = 255.255.255.0 IPXAddress = 00000000:00173124ECEE IPXEnabled = FALSE MACAddress = 00:17:31:24:EC:EE ServiceName = RTL8139 SettingID = {892900FC-9814-4488-99C0-81491C1EE93D} TcpipNetbiosOptions = 0 TcpWindowSize = 64240 WINSEnableLMHostsLookup = TRUE + [00000011] NVIDIA nForce Networking Controller (PASSED) Caption = [00000011] NVIDIA nForce Networking Controller DatabasePath = %SystemRoot%\System32\drivers\etc + DefaultIPGateway = 192.168.1.1(Same Subnet) (PASSED) Pinging 192.168.1.1 with 32 bytes of data: Reply from 192.168.1.1: bytes=32 time<1ms TTL=0 Reply from 192.168.1.1: bytes=32 time<1ms TTL=0 Reply from 192.168.1.1: bytes=32 time<1ms TTL=0 Reply from 192.168.1.1: bytes=32 time<1ms TTL=0 Ping statistics for 192.168.1.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss) Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms Description = NVIDIA nForce Networking Controller - Packet Scheduler Miniport DHCPEnabled = TRUE DHCPLeaseExpires = 2:02:30 AM 03/12/2008 DHCPLeaseObtained = 2:02:30 AM 03/11/2008 + DHCPServer = 192.168.1.1 (PASSED) Pinging 192.168.1.1 with 32 bytes of data: Reply from 192.168.1.1: bytes=32 time<1ms TTL=0 Reply from 192.168.1.1: bytes=32 time<1ms TTL=0 Reply from 192.168.1.1: bytes=32 time<1ms TTL=0 Reply from 192.168.1.1: bytes=32 time<1ms TTL=0 Ping statistics for 192.168.1.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss) Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms DNSDomain = home DNSEnabledForWINSResolution = FALSE DNSHostName = your-4dacd0ea75 + DNSServerSearchOrder = 192.168.1.1 (PASSED) Pinging 192.168.1.1 with 32 bytes of data: Reply from 192.168.1.1: bytes=32 time<1ms TTL=0 Reply from 192.168.1.1: bytes=32 time<1ms TTL=0 Reply from 192.168.1.1: bytes=32 time<1ms TTL=0 Reply from 192.168.1.1: bytes=32 time<1ms TTL=0 Ping statistics for 192.168.1.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss) Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms DomainDNSRegistrationEnabled = FALSE FullDNSRegistrationEnabled = TRUE GatewayCostMetric = 20 Index = 11 + IPAddress = 192.168.1.2 (PASSED) Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.2: bytes=32 time<1ms TTL=0 Reply from 192.168.1.2: bytes=32 time<1ms TTL=0 Reply from 192.168.1.2: bytes=32 time<1ms TTL=0 Reply from 192.168.1.2: bytes=32 time<1ms TTL=0 Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss) Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms IPConnectionMetric = 20 IPEnabled = TRUE IPFilterSecurityEnabled = FALSE IPSecPermitIPProtocols = 0 IPSecPermitTCPPorts = 0 IPSecPermitUDPPorts = 0 IPSubnet = 255.255.255.0 IPXAddress = 00000000:00173124ECEE IPXEnabled = TRUE IPXFrameType = 255 IPXVirtualNetNumber = DB43BE15 MACAddress = 00:17:31:24:EC:EE ServiceName = NVENETFD SettingID = {97D3BD12-5D03-4D64-9253-AF1B6D6CF9E9} TcpipNetbiosOptions = 0 TcpWindowSize = 64240 WINSEnableLMHostsLookup = TRUE - Network Clients - NetWare or Compatible Network Caption = Client Service for NetWare Description = Provides access to file and print resources on NetWare networks. Manufacturer = Microsoft Corporation Name = NetWare or Compatible Network Status = OK - Symbol Logon Network Provider Description = SymbolNP Name = Symbol Logon Network Provider Status = Unknown - Microsoft Terminal Services Description = RDPNP Manufacturer = Microsoft Corporation Name = Microsoft Terminal Services Status = Unknown - Microsoft Windows Network Caption = Workstation Description = Creates and maintains client network connections to remote servers. If this service is stopped, these connections will be unavailable. If this service is disabled, any services that explicitly depend on it will fail to start. Manufacturer = Microsoft Corporation Name = Microsoft Windows Network Status = OK - Web Client Network Caption = WebClient Description = Enables Windows-based programs to create, access, and modify Internet-based files. If this service is stopped, these functions will not be available. If this service is disabled, any services that explicitly depend on it will fail to start. Manufacturer = Microsoft Corporation Name = Web Client Network Status = OK Tag: Browser page loads, Protocal activity Tag: 286893
  - 15
    - What do I need to connect existing LAN to VOIP host? Our company has an existing network that is hosted externally. We also use VOIP through another vendor. We would like to bring the network in-house, but retain our existing VOIP provider. I am completely new to VOIP systems, and so my first question is - when selecting the various network components to purchase and install in-house, what do I need to buy or consider in terms of configuration, so that we will still connect to our VOIP provider? We will also be replacing the existing T-1 lines that go to our current network host provider, with fiber optic that goes out to the Internet. Do I need another dedicated line to go to the VOIP provider? Do I need any hardware to make all this happen? Maybe the above are "dumb questions" but I'm completely new to VOIP, so please bear with me. Tag: Browser page loads, Protocal activity Tag: 286891
  - 16
    - Cannot connect to internet via other PC We have 5 PCs that connect to the internet through another PC. All have XP Home. The problem is that one of them cannot connect to the internet at all yet it can successfully share files between the PCs. I have gone through the network wizard successfully many times now and everything seems to be as it should, just like the other PCs but IE7 still comes up with the page not found, check your settings. The virus program cannot detect a connection either. What should I do next? Many thanks for your attention and any help you can give me. Tag: Browser page loads, Protocal activity Tag: 286873
  - 17
    - The young golfer from Wales believes "Discipline is definitely The young golfer from Wales believes "Discipline is definitely learned and gets better with practice." Doctors and scientists said that breaking the four-minute mile was impossible, that one would die in the attempt. Thus, when I got up from the track after collapsing at the finish line, I figured I was dead. http://shenrilaa.googlepages.com/ Tag: Browser page loads, Protocal activity Tag: 286871
  - 18
    - help with acessing folders hello here is the strange situation I have a laptop and a desktop the desktop also has a wireless card when I connect via tha wireless network in ad-hoc mode everthing works fine, and I can access the shared folders from the laptop to the desktop and vise versus. I also have internet via ICS on the desktop. however when I connect via lan wire (through a router) I have internet and sharing folders only in one direction... in other words the desktop caan acess the laptop shared folders but the laptop cannot browse the desktop giving me an error (see screenshot http://img355.imageshack.us/img355/7637/sshot1yd1.jpg ) both computers are xpsp2 and there are no strange settings.. using simple folders sharing.. I can remote desktop either way since both PCs have pro. it should work!!!! but it doesnt. any ideas? i have ran out of ideas.... Tag: Browser page loads, Protocal activity Tag: 286865
  - 19
    - Wireless printer problem I have an HP DJ 6988 wireless printer that works off my home network with a Linksys Wireless Router. We have two computer hardwired into the network. My wife has added the printer via the Network Printer method. When she prints to the printer, for some reason it pops up a Preview Box on my computer and will not print until we click the Continue Printing button on my printer. When I print from my laptop, I don't get this Preview pop-up. We do not have the Preview selected on either machine. In fact, it is difficult to get to the Printer/Properties on her machine. If we right-click on the printer icon on her machine, we get an error message about some Service not running. If we double click on the printer icon and then look at File/Properties for the printer, there is no Preview option in the General Tab, Printing Prefrences/Finishing dialogue tab. Any clues? Tom Tag: Browser page loads, Protocal activity Tag: 286864
  - 20
    - Internet Explorer cannot display the webpage...but it used to! I was able to access www.lipstickalley.com just fine up until about a month or so ago. Ever since then, everytime I try to access the site I get rerouted to Yahoo! search or it just says that it cannot be displayed. I've tried three different browsers, IE, Netscape, and Firefox and still nothing. I'm able to access other sites just fine and I am able to access this particular site on other pc's. I have McAfee installed and Windows Firewall is off. I tried pinging the website and it comes back at 100% loss, request timed out. I've called Comcast and they show no restrictions on my server and had me run a tracert. Based on that, they said something was wrong with the routing in the area and had engineers come out and fix. Well the tracert results are still the same and I still can't connect. I'm running Windows XP, cable modem, no router, no parental controls. It seems like I've run out of options, what else can I do? Tag: Browser page loads, Protocal activity Tag: 286860
  - 21
    - Quickie - Will Changing Router SSID & Password Affect Private LAN? Hi, I want to change the SSID and password on our router, but just got our private home newtwork working properly and DON'T want to mess it up. I'm fairly certain I can go ahead and make the changes without concern, but would like confirmation please. Thank You! Cheryl Tag: Browser page loads, Protocal activity Tag: 286856
  - 22
    - install win xp off a server to a hard drive (auto) how do i auto install win xp located on my server to a blank hard drive. please reply. Tag: Browser page loads, Protocal activity Tag: 286854
  - 23
    - computer wont allow anyone to connect to it I have a computer that wont allow anyone to access it. It can access all other computers and the internet and shared NAS devices, but no other computer can access it or ping it. it does show up in network computers, but you cant access it. The hard drive is shared. I have allowed user to access and change files. I have ran the netwrok setup wizard. IP filtering is off. Windows firewall is off. Any ideas as to what I need to do so it can be access by other computers? Tag: Browser page loads, Protocal activity Tag: 286847
  - 24
    - SMTP and PHP Hi, computer on which i develop web applications (in PHP 5.2.4) is a windows XP based including also Apache server 2.24. My PHP web applications need to send emails and therefore i would like to test it on my development machine. For that reason i thought that IIS->SMTP component could do the job. I was thinking to setup a virtual SMTP server but i'm not successful. Where could i find detailed documentation or tutorials about how to setup IIS->SMTP to work with apache server and PHP ? thanks a lot, Al. Tag: Browser page loads, Protocal activity Tag: 286843
  - 25
    - create w2k + XP local network I am having a terrible time setting up my home network since adding a pc running XP. The w2k machines are fine, but I can't 'see' the XP machine (and it can't see the w2k machines). Of course, the 'wizard' is not compatible with w2k. What am I missing? I know it shouldn't be this difficult. I have searched this site and 'Googled' this question, all to no avail. Thanks in advance. Bruce -- The older I get, the better I used to be. Tag: Browser page loads, Protocal activity Tag: 286831

Blocking page loads for ads stalls XP page loads but not in W98.
What is different in XP that keeps asking for the protocols?

Top