video captureing

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - my movie is 191 minutes long Unable to burn the entire movie to DVD. It seems only to burn about 30 minutes. I am using HP DVD+rw with 4.7 GB/ Do I need to compress it somehow for DVD viewing on my TV?? Tag: video captureing Tag: 12736
  - 2
    - Sending to VHS I've created my movie, now how do i transfer it to VHS tape? Tag: video captureing Tag: 12735
  - 3
    - Word-wrap in these posts I love this newsgroup except for scrolling across to read some of these posts that just go sideways and sideways for ever. (I don't have a 48" monitor). Why don't some of them word-wrap? Does it result from the way in which they were input? Can I do anything about it when reading them? T H A N K S Tag: video captureing Tag: 12734
  - 4
    - Sound When I make a project the sound is like "Donald Duck". The sound in the clipp is correct. I have two older project without problem. I have done an update. Tag: video captureing Tag: 12721
  - 5
    - Splitting audio off a clip for use elsewhere I have an audio from a video clip that I want to use as a voice over on a different clip. Anyone know how I can srtip the audio off as a seperate file in MM2? TIA Michael Tag: video captureing Tag: 12720
  - 6
    - Saving movie to computer II I have the same problem as DigitalDirectToU, 2/28/04, 7:51 AM. The file saved to my hard drive has all the audio of my Movie Maker project, but the video hangs up at some point through its video stream P4, 1.5 GIG Memory, 120 Gig HARD DRIVE, Windows X DRuss Tag: video captureing Tag: 12718
  - 7
    - Full quality short movie on CD-R ? I'm using Movie Magic 2 & I have a recordable CD-Drive (not DVD drive) I have a 5 minute movie which i want to output at best possible quality onto the CD so that it is playable on a DVD player Surely full quality will fit onto a CD as the movie is only 5 minutes? Canit be done What software can be used any help appreciated, thanks Tag: video captureing Tag: 12716
  - 8
    - computer to vhs tape OK, I've done some reading. I understand what I need to do to get tv or vcr into my computer and how to copy a movie to a cd, but I still don't understand how to get a movie from my computer to a vhs tape. How do I get a movie from my computer to a vhs tape? And, do some capture cards have capture only capability and others can capture and send (is that what's missing in my understanding of how to get the movie back to tape)? Tag: video captureing Tag: 12713
  - 9
    - saving to DV camera My MM2 project is 60mins long, comprising several clips and extensive effects, transitions, audio (music) and narration. I have saved OK to Computer and to CD but not back to Mini DV. Is there a limit to the size of project, which can be saved and are there any ways round this problem? Cheers Tag: video captureing Tag: 12711
  - 10
    - Saving movie to computer Hi After I build my movie using still pictures, music, and avi clips which the avi clips play and load into movie maker 2 just fine. I try to save my movie to my computer so I can burn it to DVD. but it wont save I get the message of (NOT ENOUGH DISK SPACE ON HARD DRIVE OR SOURCE FILE NOT AVAILABLE) I have double checked all of this and everything seems to be fine. I have tried all different things, built movie three different ways, put all the files that I used in my movie in one file on my desk top. Still the movie will not save P4,1GIG MEMORY, 120 GIG HARD DRIVE ,WINDOWS XP Hope you can Help me ou Adam Tag: video captureing Tag: 12710
  - 11
    - Analogue Capture I have been unsuccessful in transferring analogue 8mm tapes to DV tape before downloding to MM2. I have a Canovision E60 8mm camcorder and a Panasonic NV-DS38 Digital camcorder. Can someone please advise me on cable connections and the necessary sequence of action. Thanks Tag: video captureing Tag: 12708
  - 12
    - importing mpeg files Dear All I tried to import files that has been downloaded from the internet in (mpeg) format, but every time I got the following message:The file *.mps is not a supported file type, and it cannot be imported into Windows Movie Maker Is there any way to go around this problem Thank you Tag: video captureing Tag: 12706
  - 13
    - Re: .avi Storyboard/Audio Problems - PapaJohn - Thanks......but......... As you indicated, changing the name of .ivaudio does indeed stop the audio problem from occurring in Storyboard. However, at a price. The video, while playing right through, jerks or shudders a bit while doing so, and the sound plays through too but is of only average quality. In short, a clip played in Storyboard isn't a patch on a clip play in Collections. Something in MM2 is still trying to mess with the .avi file. So, I give up! ;-) Can I revert back to MM1? If so, how do I do this? If I have to use the XP Pro roll back feature, will any software that I have installed since MM2 - quite a bit - be removed also? I would be very grateful if you could advise me on this. I have to say that this whole experience has been, far and away, my worst with any Microsoft product. Not good at all. DM Tag: video captureing Tag: 12699
  - 14
    - New XP Pro install, MM2 update, MM2 now toast!!! XP Pro,. Radeon 64 DDR VIVO, Creative Webcam and sometimes Fuji S602 Z all connected. Latest Radeon Cat 4.2 installed. Movie Maker was working. Didn't test it fully but I'm pretty sure I started it up and the composite input off Radeon came up. Been doing the thing at Windows update (new install) and noticed the MM2 update so did it also. Now when I choose to start recording MM2 hangs. Supplied help seems to indicate a video device selection dialog box should come up but it never does. Any ideas? I havem't updated WMP from 8 and would prefer not to. Hopefully that's not a requirement is else the update site would have indicated same. Also I can't find any "Remove" for MM or MM2 in Add/Remove under any of the choices. I can seem to use all the video devices in MSMessenger, the VFW's devices (cams) in NetMeeting and ATI's TV-In app is working finest kind. tia for any help. If nothing else, how do I remove it? Surely it's not delete the folder and manually purge the registry? Tag: video captureing Tag: 12698
  - 15
    - Titles question Is there a way to permanently associate a title that is "on the selected clip" with a specific clip so that when you move the picture (or when it changes position because another pic was added/deleted), the title will move with it? Thanks. Tag: video captureing Tag: 12694
  - 16
    - Help making clips please I made a nice avi file from DVIO. I am going from vcr to camcorder to pc through firewire. Worked great and looks very clean. It is 6 gigs. My problem is creating clips to edit. When I click import video into WMM2 with make clips checked, well it just does not make the clips. I have tried right clicking to make clips also, no luck this way either. Its just one big file. Am I missing something or does it not work on .avi files? I also split the avi file and that did not help. I thank you in advance for any help. Tag: video captureing Tag: 12688
  - 17
    - sound I am trying to copy my home movies from my camcorder to a cd using Windows Movie Maker and there is no sound on the end result. Please HELP!!! Tag: video captureing Tag: 12686
  - 18
    - Found the problem... I did a Windows Update where I update the Media Player and DirectX and all is well now Rich Tag: video captureing Tag: 12681
  - 19
    - Recording CD Via Nero Express Atempting to record a Movie from Movie Maker 2..using Nero Express.. Nero was unable to fined the Movie that I was looking for. Saved in My Documents Under " My Videos" If I open Project in Movie Maker it's there but nero cant see it. Help Please! Terry D Tag: video captureing Tag: 12680
  - 20
    - WMM1 Saving Files Getting to the point of throwing pc out of th ewindow. I have made a very small sample movie by taking clips from an MPEG file on a CD. WMM1 split the whole file down into clips and I have made up a small sequence using the clips, but what ever I do the damn thing won't save to my hard drive! The source file is there, the file I am trying to save is only 11mb so really small, the folder I am saving to is there but the little ****** still won't save the file for me! HELP! (or am I going crazy? Bob Tag: video captureing Tag: 12678
  - 21
    - Computer to VHS How do I get my captured and edited movie back to a VHS tape. WindowsXP Home Windows MovieMaker 2.0 Dazzle DVC 80 or 150 Analog Video Capture Card via USB Tag: video captureing Tag: 12677
  - 22
    - i want to know if it is free je parle francais cela peut Ãªtre en fvrancais mais je peux lire anglais ,mais j'aimerais l'avoir francais merci beaucoup de fvotre attention Tag: video captureing Tag: 12676
  - 23
    - 16:9 Aspect Export Problem Hi there! I'd appreciate any input someone might have on my problem Here's the scenario - Capturing video as DV-AVI via firewire from a Sony MiniDV shot in 16:9 - It shows up just fine in the preview window and I can edit it with no problem - When I go to Save As, no matter what settings I try, the final saved AVI file plays distorted (people come out thin) I've tried playing with the advanced settings in every combination of 4:3 and 16:9 for both capture and saving but the result is always the same Anyone have any ideas? Tag: video captureing Tag: 12672
  - 24
    - Poor Audio Quality Hi NG, I'm using Windows Movie Maker 2 to edit and merge Videos recorded with my camera (Mustek MDC 5500Z, produces AVI videos with Audio IMA ADPCM). When I import one of these Avis with Movie Maker (it creates a clip) then the sound quality is so heavily reduced, that it is nearly impossible to understand what anybodys says on that video. I did not found any setting to configure audio quality. Can anybold help? Regards, Mark -- Irgendware Software Solutions GbR http://www.irgendware.com Tag: video captureing Tag: 12667
  - 25
    - I updated it to the second and my movies don't work? I updated my Movie Maker to the Second movie maker (2) and now the movies i made on my first one, don't work. I need help because they were awesome movies. Tag: video captureing Tag: 12661
- Next
  - 1
    - Fonts and Colors OK, this will seem a bit stupid, I'm sure. but here it is anyway; I cannot find the ability to change fonts, colors, or alignments for an overlay. I've read the help file that states, "Selecting the title font and color This page lets you choose the font and colors for your title or credits. By changing the font and colors, you can change the appearance of the title to enhance your movie. The following options appear on this page."... however, I'm not seeing this option anywhere. When right clicking on the text, most MS programs give the option "FONT". This one does not. Did I miss an instalation file? Am I completely in the dark about something simple and stupid? I can see my title, the overlay works fine, I've tried in both without starting a new project, and in a new project - what I would like to do is to have an overlay in a semi transparent font in the lower right hand side of the screen. Help Tag: video captureing Tag: 12654
  - 2
    - Problems with sending Movies by email Hello, I am sending movies by email and when they go they are recieved the audio is cutting in and out and the video is a little choppy.PLEASE HELP 1st time user. magoman@aol.com Tag: video captureing Tag: 12651
  - 3
    - Caprute analog questions, cont. attn "Hank" My original ? and Hank's response is below. I have to admit that I am a little slow when it comes to this high powered stuff, but ther has to be more to it than Hank says, and I cannot se what it is. How do I hook up my VCR or 8mm camcorder for instance? Oh, I guess I use co-ax for the VCR, but how about my camcorder? Can I do that without tools as well Thanx again, Lee Hank wrote According to the spec sheet I saw for that machine, it comes with TV tune card built-in. Nothing else to buy You should be able to launch MM2 and select "capture video" and be good t go Good luck -Han "Leeb" <anonymous@discussions.microsoft.com> wrote in messag news:1C1CA03E-10AC-4BFC-B1E7-09F1336380B6@microsoft.com.. > I am sorry for the dumb questions, but I feel like a dolt. I just bega reading this board and find that everyone is well beyond me in understandin WMM. I need some basic knowledge >> I want to copy videotapes (VCR and those created with a Canon Hi8 ES2500 to DVD. No editing at this time, but that may come later. My PC - Son RZ32G - has USB, and video connectors - S-Video, Composite audio/video, an S400 (IEEE 1394) port. I can even input a TV signal I guess - don't inten to try. But it doesn't look like it has what I need to do the job >> Do I need to ADD a "capture device" of some kind since it appears that have only analog tapes to deal with? Must I upgrade my video card (NVIDI GeForce4 MX 440 with AGP8X (Sony))? Are there alternative ways to go Suggestions/recommendations? Thanx, Lee > Tag: video captureing Tag: 12644
  - 4
    - Analog capture thru sony dv camera I am trying to capture analog video using my Sony TRV38 digital video camera as a converter.I am using an IEEE1394 connection.When I go to capture the video it shuts the camera off. The only way I can capture the video is if I turn the camera on first. Then select record pause on the camera in vcr mode, and then connect the IEEE1394 cable. I get an error message, close it, then it starts to capture the video. Is this the only way to capture analog video thru my digital video camera using a firewire connection? Tag: video captureing Tag: 12642
  - 5
    - movi maker Tag: video captureing Tag: 12641
  - 6
    - further important clue to my WMM problems::: In my ongoing quest (about a month now) to clean up the excessive jerky, hic-cup-py platyback of video in my WMM2, I want to add the following clue: After I capture video, there is that horizontal green progress bar, that I think(?) says somethng like "loading", but now it just zips(!) right through itself instantly ... whereas in the past when my WMM2 was working *right*, that bar would slowly progress left-to-right as it gauged the processing of my captured video Anyhow, nowadys, it does none of that - it just blows right through it. Can this suggest something? Is something zapped on my system? I've tried reloading WMM2 a few times; no luck ... still stranded on an island .. with no WMM2 to play with ..... help .. Thanks, Michael Tag: video captureing Tag: 12640
  - 7
    - DVD player that plays back WMV 2Q2004 When this player is available I think I will finally take the plunge and convert my edited DV files to high qaulity WMV. http://www.pcworld.com/news/article/0,aid,114279,00.asp I currently use the free Windows Media Encoder 9 Series to convert my DV files to a WMV format with goood quality and that could tolerate a few re-encoding generations if necessary. However, I am reluctant to delete any DVs because I don't know if the format I selected will playback in a hardware device. This player would validate that. This is my current "Encode DV.bat" file: cd \program files\windows media components\encoder rem the following command is all on one line cscript.exe wmcmd.vbs -input "C:\Video\Edited" -output "C:\Video\Encoded" -v_codec WMV9 -v_mode 2 -v_quality 85 -v_keydist 1 -v_preproc 1 -a_codec WMA9PRO -a_mode 2 -a_setting Q75_44_2_24 rem pause so that you can see any possible errors in the command pause The script above encodes all files in "C:\Video\Edited" to variable bit rate quality level 85 deinterlaced, audio quality level 75. The results are placed in "C:\Video\Encoded". For all the switch definitions see Start Menu, All Programs, Windows Media, Utilities, Windows Media Encoding Script, the Using command-line options section Tag: video captureing Tag: 12639
  - 8
    - Problem with project in movie maker When a make a project and will try to play it the voice is like "DUNALD DOCK". There are some projects which are ok. Start after a recovery start and windows update Help 044127345@telia.com Tag: video captureing Tag: 12632
  - 9
    - Saving to SVCD... I want to make autorunning SVCD/VCD discs. Note that I haven't got a DVD recorder, and the computer is getting a bit too long in the tooth to upgrade... (P3/700 + 512 MB of memory) I can successfully save .WMV files from TV, VCR or VHS camcorder via my *Belkin USB Videobus* (yes,only USB1.1. I don't have USB2 or Firewire.) I am unsure of the _best_ way to proceed though, and would be grateful for any advice. -- ¦ zulu ¦ Tag: video captureing Tag: 12625
  - 10
    - converting files how can i convert wswmm files to avi or mpeg files please reply bac thanx Tag: video captureing Tag: 12624
  - 11
    - can't put my movie onto my website I had made a video tutorial to put on my website and the file extensions that are made are either .wav or .mswmm. My website only accepts .avi .mov or mpeg . Is there a way to change the file extension or choose it before it gets saved? I tried to have it put on the web so people coming to my website can access it through a link, but it keeps telling me that they are not available somehow. Any suggestions? Does NVIDIA have anything to do with the Windows Movie Maker? I don't know where that came from. Tag: video captureing Tag: 12622
  - 12
    - import of .mov-files hi experts is there any way to import .mov-files to movie maker my nikon coolpix saves only the .mov-format. Thanx in advance for your help w. Tag: video captureing Tag: 12621
  - 13
    - copy MM2 to CD playback on media player not responding I chose "best quality for playback on my computer (recommended)" It went through the regular program taking about 35 min. to fin. playback on medie Player ...comes up and says there is an error reading from the CD Rom??? It will not play back.. Can you help Please... Terry D Tag: video captureing Tag: 12619
  - 14
    - I have problems with mm2 after i downloaded the new updates from windows website, and after downloading MM2 with the updates every time i try to open it, it opens and everything but when i try to view or choose a video trasition or do anything with video editing it shuts down the program by it self. I don't know what i can do i tried the best i could i tried to download it again, but no use still have the same thing. If anyone can help me please send me an e-mail at rsoboh@yahoo.com Thanx a lot and i appriciate ur help Tag: video captureing Tag: 12618
  - 15
    - I got microsoft success story I heard about movie maker, I own a digital camcorder so I went to buy a good computer with XP so I could download the (FREE) movie maker ...well it does not work and the more I search the more I find out the tons of problems with the program....and I try to get help and they send me to the guy I bought the PC from and he tells me that he does not provide technical support with a program downloaded from Microsoft, I go back to Microsoft and they tell me I got to pay..........what a joke Tag: video captureing Tag: 12616
  - 16
    - digital cameras avi files I have a canon powershot s50 and have taken some videos with it. The files are avi and the problem that Im having is that movie maker will not open the files, though I can play the files. Can anyone help me regards Marcel Tag: video captureing Tag: 12611
  - 17
    - Replacing video with slide show Can someone please help me find the "least expensive" software that will allow me to replace video while continuing to hear the audio associated with that video. In other words, I have a video clip of my father discussing his early life. While he is talking, I want to fade into still pics of his early life. This is not like a narration where I would add voice to a series of still pics, but rather the opposite. Replacing the video while leaving the audio I was told that WMM might do this, but I have not been able to figure it out if it does. If it will, I would appreciate any assistance you might be able to provide. If it won't, does anyone know a software package that will. I have been told that Adobe Premiere will do this, but have not checked it out due to the cost Thank you for an assistance. Tag: video captureing Tag: 12609
  - 18
    - MM2- Click Play= Class not registered Updated to MM2. Not sure if is completely installed or not. Followed instructions at papajohn's and in KB Article 825229 about copying files from C:\WINDOWS\RegisteredPackages\{60BFF50D-FB2C-4498-A577- C9548C390BB9}. And there has been no change in performance. Running XP Home About MM2 Screen give this information Version 5.1 (Build 2600xpsp2.030422-1633:Service Pack 1) Windows Movie Maker Version 2.0.3312.0 Two major problems--- I am unable to play clip, storyboard or timeline. I have imported clips from winter pack, transitions, some of my own photos and audios- I drag them to the storyboard, click Play Clip or Play Storyboard and get nothing in the preview screen. When I click the any of the buttons on the preview screen I get a popup that says "Class Not Registered". What does this mean and how do I correct it? Also, when I try to record a narrative- nothing happens. There is nothing in the device box, and no choices in the drop downs- microphone works in other applications- Any help to get this up and running sure would be appreciated. Thanks. Tag: video captureing Tag: 12603
  - 19
    - titles & Effects When i get the insert screen for titles and type the he firts letter, moviemaker shutdown. Is there an fix for this? Tag: video captureing Tag: 12600
  - 20
    - i have bought Nero and want to create dvd's of my home movies and stuff. i have bought Nero and want to create dvd's of my home movies and stuff. what i am stuck with is, what format to i have to store them on the cdr's? is it MPG or can i store them in WMV (Window Media Player) or do i have to have something else done before it goes to the cd? the original files are in WMV that i have made up with Window Movie Maker version 2 hope someone can help me with this. thanks in advance J Tag: video captureing Tag: 12592
  - 21
    - minor audio issues I posted a few days ago but did not get a response. Was hoping papa john or cari might have a suggestion.I have some static and a few hickups in the audio portion of movie when I have saved to avi file. Does not matter if song was up loaded or ripped. Does not happen in every song and seems to happen with transtions. I have a pent 4 and the sound card is intergrated in the mother board. Do I need a better sound card? I de frag before each save and most everthing is turned off in the background. Any ideas? Tag: video captureing Tag: 12578
  - 22
    - No Sound On Movie When I export a movie from my digital camera the sound is played back to me from the video camera but when I start making my movie in Windows Movie Maker all the sound has gone.Does anoybody know why this is beause I have obviously recorded the sound for it to be played back to me in the first place. Kelly Tag: video captureing Tag: 12571
  - 23
    - Movie Maker 2 With MM1 I was able to convert VCD to WMV.Please let me know whether Can I do the same with MM2. Tag: video captureing Tag: 12569
  - 24
    - capture analog questions I am sorry for the dumb questions, but I feel like a dolt. I just began reading this board and find that everyone is well beyond me in understanding WMM. I need some basic knowledge I want to copy videotapes (VCR and those created with a Canon Hi8 ES2500) to DVD. No editing at this time, but that may come later. My PC â?? Sony RZ32G â?? has USB, and video connectors - S-Video, Composite audio/video, and S400 (IEEE 1394) port. I can even input a TV signal I guess â?? donâ??t intend to try. But it doesnâ??t look like it has what I need to do the job. Do I need to ADD a â??capture deviceâ?? of some kind since it appears that I have only analog tapes to deal with? Must I upgrade my video card (NVIDIA GeForce4 MX 440 with AGP8X (Sony))? Are there alternative ways to go? Suggestions/recommendations? Thanx, Lee Tag: video captureing Tag: 12567
  - 25
    - can't save movie file hi, i'm doen with my project. I was trying to "save movie file" to my computer and/or recordable cd but it does not succeed. It says that I have to check my destination drive and source file if they are still available...and they are What seems to be the problem? Thanks. Tag: video captureing Tag: 12566

i have a samsung mini dv camara and i only have audio
settings. I use a usb wire. I have no idea what the
problem is its really makin me mad. Its a scd23/d24
samsung. I really need help..

Top

Re: video captureing by PapaJohn

PapaJohn
Sat Feb 28 17:08:41 CST 2004

Tony,

See the Digital Camcorders < Samsung page of www.papajohn.org

The post at the bottom of the page was just added this morning.

PapaJohn

"tony" <skateordie294@aol.com> wrote in message
news:3c0501c3fe4d$90551da0$a001280a@phx.gbl...
> i have a samsung mini dv camara and i only have audio
> settings. I use a usb wire. I have no idea what the
> problem is its really makin me mad. Its a scd23/d24
> samsung. I really need help..

Top