MM2 video capture problem

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - MM2 not responding Have been using MM2 for a while and it was working, had some problems with some software and had to restore and now it will come up, but when I import a video clip, it just stops and then generates an error to send to MS and stops responding. Have tried to reinstall MM2, but that did not help. Running XP Pro oem on a 2.4G 512m Asrock MB -- Jim Gramm www.realtruth.net Tag: MM2 video capture problem Tag: 4285
  - 2
    - processor overload 100procent when capturing ? hello, when i capture my Digital Tape into the recommended format, my processor runs up until 100procent ! I have a 2,66Ghz processor with 256Ram. This should be more then sufficient. I suspect my processor since it's not the first time it consumes too much even though it's video editing. Do you guys have the same or do I have to bring my processor back for repair (furthermore, movie makers sometimes hangs without reason...processor or application problem ?? ) ? tx, kris Tag: MM2 video capture problem Tag: 4284
  - 3
    - movie maker install update cant install because we get a message that comes up with errror 1335 cabinet file data1.cab corrupt. Any answers would be greatly appreciated Tag: MM2 video capture problem Tag: 4278
  - 4
    - High Speed capturing? Hi there, I posted this question some time ago with no answers. Is there really no way of capturing high speed movies? Even 500p/sec. not possible? Thanks in advance Gerry Tag: MM2 video capture problem Tag: 4274
  - 5
    - Capture quality problem with MM 2.0.3312.0 Hi, I have a video capture quality problem. Here is my configuration: MM release 2.0.3312.0. DirectX 9 Intel P4 2.4ghz pc / XP Home with all the updates. Old Sony analog camcorder "handycam". Dazzle - DVC 80 USB video - external videl in/out device. During video capture (recording), the MM video preview screen frequently freezes for several seconds then resumes synchronized video playback input from the camcorder. The video capture preview screen also occasionally shows a "rolling" screen or shows a lot of distortion and poor quality. So, what I end up with is a full video capture from the camcorder with lots of "frozen" segments - and some segments with lots of distortion and poor quality. 30-40% of the video capture is good. Funny thing, capture of audio from the camcorder works fine - even during the "frozen" video capture segments. Any ideas for correcting this problem? Thanks for any help. GL gladd@earthlink.net Tag: MM2 video capture problem Tag: 4261
  - 6
    - how to how exactly does the movie maker work and with what software? emails only please I dont check posts. jmistar688@aol.com Thanks, Jaclyn Tag: MM2 video capture problem Tag: 4257
  - 7
    - Catastrophic Failure I have a Dell Demension 8200 and when I use MS MM I encounter failure notices often when I try to add transitions, play the storyboard, split video, etc. I sent an error report and was told that the problem was Problems When You Are Using an Out-of-Date Version of the C-Media Cmaudio.ax Driver File I downloaded Cmaudio.ax and tried to install it without much luck. Help??? Tag: MM2 video capture problem Tag: 4254
  - 8
    - No text or titles possible I have just updated my WMM to version 2, downloaded from the MS site, but have been completely unable to get the titles and credits to work. When I click 'Done, add title to movie' all I get is a plain light grey window with no text. Can anyone help please? Tag: MM2 video capture problem Tag: 4249
  - 9
    - Old question? Maybe Hi, I have just started using WMM and I have a problem with adding brightness to a clip I have. When I click on the brightness and drag it to the clip WMM closes completely. Does anybody know why? Thanks Tag: MM2 video capture problem Tag: 4239
  - 10
    - 1394 I tried to get my panasonic dv connected to my pc with no success I un-installed my 1394 drivers thinking that they would re-install at boot, unfortunately this did not happen as the system cannot find the drivers. I have searched the net to no avail, Does anyone know where I can get these drivers OHCI compliant host controller version 5.1.2535.0 I am running xp home with a p4 2.8gh Tag: MM2 video capture problem Tag: 4237
  - 11
    - Error: Can't get the buffer format Creation of an avi file seems to cause the "Error: Can't get the buffer format" error. Would anyone know its remedy, please ? Tag: MM2 video capture problem Tag: 4234
  - 12
    - Viewing a movie How can I get the movie to fill the entire screen? It appears in a "TV" like window with play, stop, sound, etc. buttons!!! But in Movie Maker, it will play full screen????? Thanks, SOnja Tag: MM2 video capture problem Tag: 4232
  - 13
    - Movie Maker 2 Creativity Fun Pack I finally got MM2 installed by using one of the techniques on www.papajohn.org. But I still can't get the new Creativity Fun Pack installed. I keep getting the "Error 1324. The path MY DOCUMENTS contains an invalid character." Tag: MM2 video capture problem Tag: 4231
  - 14
    - I WANT TO SAVE MY MOVIE TO DVD. I HAVE A DVD WRITER I have recorded a homemovie of my kids on my canon digital video camera and edited and added music etc using windows movie maker 2. I now want to copy it onto DVD and send it to my family in the UK (I am in New Zealand). When I try to burn it onto my DVD Writer (LG B GOLD 5) my burning software tells me I need a MPEG1 file not a WMV file which my video is in. Do I have to buy more software or is there any free on the net to convert it? Why doesnt Movie Maker 2 convert it or does it and I havent realised? Any help would be appreciated as this is driving me mad. What I thought would be a 5 min job has turned into weeks! Sarah Tag: MM2 video capture problem Tag: 4225
  - 15
    - Movie Maker on CD? I just recorded a Windows Movie Maker to my CD Burner. THis movie plays back perfectly on my CD Burner, but this movie will NOT play in my dvd writer on my computer, or my DVD player hooked up to my tv. I guess my question is basic...can a Video CD playback on a dvd Player of any kind...or do I need to rerecord the movie on to a dvd, so it will play on my dvd Player hooked up to my tv. Thanks in advance for any help! DM Tag: MM2 video capture problem Tag: 4221
  - 16
    - catastrophic failure I was nearly done with my whole movie when I went to save my work, and a warning popped-up on my screen "Catastrophic failure." Should I click ok and it should restore my movie to its last save; Or will I loose everything. Please Help ASAP!!! Thanks Tag: MM2 video capture problem Tag: 4220
  - 17
    - missing photos Can anyone tell me why photo's saved in win xp movie maker 2 as a slide show "disappear" after they have been saved and are replaced with red crosses when the project is opened up again to continue working on it. Any help on this subject would be gratfully recieved. Thanks in advance. P.S. all images are saved as jpeg Tag: MM2 video capture problem Tag: 4219
  - 18
    - Problem adding video clip I place the playback indicator bar where I desire the video clip to start, but it always defaults back to the start of the timeline...HELP....... Tag: MM2 video capture problem Tag: 4216
  - 19
    - Cannot open capture device I just upgraded to Movie Maker 2. Movie Maker 1.1 worked just fine with my hardware, however, everytime I hit the capture from video device button, I get a message saying the device is in use. I know that it isn't in use - there aren't any applications that can use my video device running at the time. As I said earlier, the previous version worked fine. Has anyone else encountered this? Video Capture Device: nVIDIA GeForce FX 5900 Ultry using the nVIDIA Universal WDM Capture Drivers -KzT Tag: MM2 video capture problem Tag: 4215
  - 20
    - Re: Catastrophic Failure Well I checked the gif file and the dimensions are 639x476, it contains about 300 frames, and it's about 90 seconds long. It doesn't seem like its that big, but I guess I don't know all of the technical constraints of Movie Maker. Also, to help you out and let you know, if you see loss of quality in your gif file on the storyboard/videostream screen, the quality will return to almost perfect on the movie when you've saved it as a movie file. >-----Original Message----- >What are the pixel dimensions of the gif? > >MM2 doesn't import a copy of the file, just enough to create a big >thumbnail, along with the pointers to the source file. I'm wondering how >it's handling animated gifs. Does it do a thumbnail for each image of the >gif? I'll have to import one and check. > >PapaJohn > >"Matthew" <mega_matt@hotmail.com> wrote in message >news:03a301c36831$f02ccd20$a601280a@phx.gbl... >> Ya, the memory issue is most likely the cause of the >> problem. I seem to remember a message concerning virtual >> memory the first time I attempted importing the file. I'm >> thinking the problem is being caused by the method in >> which Movie Maker imports the files. Seeing the imported >> files are representations of the original sources, it >> would take quite a bit of memory for the program to copy >> the files. >> It's kind of strange that the program uses so much memory >> when executing such tasks though. When I tried Adobe >> Premiere, it imported without any problems. The downside >> to premiere though, was that the picture quality of the >> gifs dropped severely. I find that the picture quality of >> animated gifs are better with Movie Maker, so its a shame >> I can't import a file that size. Hopefully, the problem >> will be corrected if or when they upgrade to Movie Maker >> 3. >> Well anyways, thanks for the help Papa. >> >> >-----Original Message----- >> >I've imported 15 GB files and 3008x1960 pixel pictures >> without problems. >> >With that big of an animated gif file, you might be >> bumping into a >> >memory-related issue. >> > >> >I haven't tried animated gifs in MM2. Guess I need to - >> thanks. >> > >> >PapaJohn >> > >> >"Matthew" <mega_matt@hotmail.com> wrote in message >> >news:0c0d01c36829$d351b100$a001280a@phx.gbl... >> >> Animated Gifs arn't supported as video files, but are >> >> however accepted as picture files. Which means they can >> >> be accepted through the 'Import Pictures' function. As >> I >> >> have said in my previous statement, my other .gif files >> >> were accepted. When you equip them to the >> >> videostream/storyboard and hit play, they play out the >> >> animation of the animated gif. >> >> *Helpful Hint for those who want to make their own >> >> original Intro/Credits* >> >> The actual problem was that it wont accept the one >> >> certain larger .gif file. THE OTHERS WORK FINE. My >> >> question is; >> >> Is there a problem with the image importing portion, >> >> seeing all of the 'loss of quality' posts and if so, >> >> would that particular portion of the program have a >> limit >> >> to the size of files it accepts. >> >> >> >> >-----Original Message----- >> >> >Matthew, >> >> > >> >> >Animated gifs are not one of the video file types >> >> supported by MM2 >> >> > >> >> >PapaJohn >> >> > >> >> >"Matthew" <mega_matt@hotmail.com> wrote in message >> >> >news:021a01c3681d$cc583920$a601280a@phx.gbl... >> >> >> For some reason, whenever I try to import one of >> >> my .gif >> >> >> files into movie maker, it gives and error message >> >> >> saying "the file could not be imported. Catastrophic >> >> >> Failure." It only does it with the one file because >> it >> >> >> still accepts my other .gif files. I've tried >> resaving >> >> >> the animation, but it still gives the same error >> >> message. >> >> >> The only thing I can figure is that the file is too >> >> >> large, even though its only 3,876KB. But I have no >> Idea >> >> >> why that would be a problem seeing I have been able >> to >> >> >> import Video footage that was 5,215KB and audio >> files >> >> >> that went uo to 25.6MB. Please help me. >> > >> > >> >. >> > > > >. > . Tag: MM2 video capture problem Tag: 4212
  - 21
    - saving MM2 project to CD I am unable to save my completed project to my CD burner (Lite-on) or my DVD Burner (pioneer a106) which will butn a CD or a DVD+/-. The only options I see are save to hard Drive.--- That works. QUESTION- How do I get MM2 to recognise thet I have two available "burners" installed? I'm using a XP sp1/amd 2.0G/512meg ram/2 80gig HD/ and importing AVI raw video plus .jpg stills. Curent project is only 15+change minutes. Tag: MM2 video capture problem Tag: 4208
  - 22
    - Movie Maker My goal is to create a slideshow that has ~800 photos in it with around 14 music clips. The file says that it is about 400 MB big and the CD should hold about 700. I have broken it down into 3 smaller files to see if I can get it to create, it doesn't really freeze the computer, but say the initial create time is 60 minutes, it gets about 30-50% complete and then the time just keeps increasing and no more completion. I have been successful with a small 30 photo slideshow with music....but nothing larger. Also, with the small video I did create, the slideshow did not fill the screen when played....It had like a tv looking screen with sound, play, etc. buttons....Will it fill the screen so that each picture covers the screen. Tag: MM2 video capture problem Tag: 4207
  - 23
    - Audio I am having the same problem with my saved movie files. The audio cuts in and out when the sceens change. I even captured the video again with no editing breaks and the audio still cuts in and out. HELP!! Tag: MM2 video capture problem Tag: 4203
  - 24
    - Video Effects Cause moviemaker to Crash Clips load and save with no problem. There is no ability to use any video effects rendering the program worthless. Each time I apply video effects such is increasing brightness or any other video effect the program immediately shuts down. Anyone having a solution please help. Also, I've noticed clips over 200mb are often truncated indicating the limits of moviemakers abilities to perform. Tag: MM2 video capture problem Tag: 4201
  - 25
    - Video distorted previewing captured video Help please! Can't figure this one out. My computer is a Gateway 500SE 1.8 Ghz processor 512MB RAM. When I capture video with MM2 from my VCR through my capture card(AverEZ- DVD Maker) It captures the video and audio just fine but, when it's actually capturing the video the actual video in the preview window is distorted so I can't see what I'm capturing. But I can hear the audio just fine.I've checked all the settings and made sure there not in PAL mode. I would really like to see my video in the preview window when capturing. Any suggestions would be greatly appreciated. Thank-you! Tag: MM2 video capture problem Tag: 4199
- Next
  - 1
    - Manual capture problem Hello, I am able to cpture the entire tape in the cam, but the option to capture only a part of it doesn't work. I can contrle the cam and when clicking on "start capture" it starts the tape in the cam, but nothing is captured. When clicking "stop capture" an error messages says I should check the connections because nothing has been captured. Connections should be fine, as I could capture under the different settings before. any thoughts? Cheers Dan Tag: MM2 video capture problem Tag: 4196
  - 2
    - Moviemaker XP save movie issue I have 1h:47m movie worth of video clips that I put into a project. When I save the movie to my computer it only saves the first 28 minutes. I am saving in wmf 689kbps- I need 555mb of space ad I have over 15gig. Tag: MM2 video capture problem Tag: 4190
  - 3
    - Recording MM2 video back to Sony TRV-DCR340 When I try to export a movie back to tape, I put my camera VCR mode, the tape begins to run with a blue srceen and a little red dot at the top, but there is no > video streaming to the tape. The camcorder screen stays > blue for a least an hour (for a 2min video). When time > line is completed I click finish but I have no video. > When I rewind and view it, I have blue screen and every > once in a while a partial picture. No sound no video. > I have the latest FP for XP and latest MM2. > I would appreciate ANY help in getting my video to tape. > Thanks, > Tom Tag: MM2 video capture problem Tag: 4185
  - 4
    - Papa John.... Fire wire drivers any suggestions on where i can get the lates fire wire drivers? Eric, It seems like you are narrowing it down to a firewire card or driver issue (download/install the latest driver for starters), or a firewire cable issue (borrow and try a different one for starters) PapaJohn "Eric" <ef_7@hotmail.com> wrote in message news:01b001c36746$cc8e8610$a401280a@phx.gbl... > ok i tried that but every time i try to "send file to > camera" it says "DV10 MFC Application has encountered a > problem and needs to close. We are sorry for the > inconvenience." > Any help? > Also... JVC called back and said the problem might be > with the fire wire.... they said: "maybe incorrect > settings with the fire wire... time code - set dropframe > 29.97 sps" but i've been looking and so far i've found no > way of accessing my fire wire (Acoustic Research, IEEE > 1394, 4 pin to 6 pin) settings. Any help? Please! > > >-----Original Message----- > >Yes > > > >"Eric" <ef_7@hotmail.com> wrote in message > >news:056001c366ae$ce7dcf00$a601280a@phx.gbl... > >> Ok so I save the movie file to "My Computer" > >> and then use DVIO to send it to my camcorder. Is this > >> correct? > >> >-----Original Message----- > >> >The export to camera process is the most demanding on > >> your computer. Defrag > >> >your hard drive and turn off other apps as you do it. > >> > > >> >Or, maybe save it to a DV-AVI file on your hard drive > >> first, check to be > >> >sure the file isn't fragmented, and use the DVIO > utility > >> (Camcorders... > >> >General page of www.papajohn.org) to transfer it to > >> your camcorder. > >> > > >> >PapaJohn > >> > > >> > > >> >"Eric" <ef_7@hotmail.com> wrote in message > >> >news:048201c3669f$1b6b83d0$a401280a@phx.gbl... > >> >> Ok!!! Big Problem!!!! My friends and i recently got > >> >> together for a reunion, i recorded the events with > my > >> JVC > >> >> Digital camcorder, with MiniDV, model no. GR- > DVL320U. I > >> >> promised everyone that I'd edit the footage with my > >> >> computer, VAIO Windows XP Home, PCV-RX755. I > transfered > >> >> the files to my computer, with Movie Maker 2 Video > >> >> Capture Wizard, using AR Acoustic Research > proseries II > >> >> IEEE 1394 4 pin to 6 pin cable. I edited it using > Movie > >> >> Maker 2, but when i transfered the finished product > >> back > >> >> to my camcorder, the audio had breaks in some parts > >> >> making the quality really bad. We've experienced > this > >> >> problem before and were told to send it to get > cleaned, > >> >> but the problem was only temporarily fixed. We tried > >> >> contacting JVC, but they've been not very much help. > >> >> Someone please help! Tag: MM2 video capture problem Tag: 4184
  - 5
    - PapaJohn - I can't save :( Whenever i save a movie the progress bar always stays at 0% and the minutes are always climbing... it literally never stops increasing! HELP! Plaese :). Thanks... Tag: MM2 video capture problem Tag: 4181
  - 6
    - Re: Catastrophic Failure Animated Gifs arn't supported as video files, but are however accepted as picture files. Which means they can be accepted through the 'Import Pictures' function. As I have said in my previous statement, my other .gif files were accepted. When you equip them to the videostream/storyboard and hit play, they play out the animation of the animated gif. *Helpful Hint for those who want to make their own original Intro/Credits* The actual problem was that it wont accept the one certain larger .gif file. THE OTHERS WORK FINE. My question is; Is there a problem with the image importing portion, seeing all of the 'loss of quality' posts and if so, would that particular portion of the program have a limit to the size of files it accepts. >-----Original Message----- >Matthew, > >Animated gifs are not one of the video file types supported by MM2 > >PapaJohn > >"Matthew" <mega_matt@hotmail.com> wrote in message >news:021a01c3681d$cc583920$a601280a@phx.gbl... >> For some reason, whenever I try to import one of my .gif >> files into movie maker, it gives and error message >> saying "the file could not be imported. Catastrophic >> Failure." It only does it with the one file because it >> still accepts my other .gif files. I've tried resaving >> the animation, but it still gives the same error message. >> The only thing I can figure is that the file is too >> large, even though its only 3,876KB. But I have no Idea >> why that would be a problem seeing I have been able to >> import Video footage that was 5,215KB and audio files >> that went uo to 25.6MB. Please help me. Tag: MM2 video capture problem Tag: 4174
  - 7
    - Audio/Music tracks Hi - Movie Maker is great, but it's audio controls appear to be lacking. I want to have background music in my video, but I cannot see how to control things like fade in or out or volume with any kind of precision. There are no controls on the audio/music track in the storyboard that let's me visually see where volume changes or fade in and out occurs, so I cannot precisely synchronize with the video and audio track. Any tips about how better to control the audio settings? Are there any add-ons I can buy that will help with this? - Dylan Tag: MM2 video capture problem Tag: 4171
  - 8
    - Catastrphic Failure For some reason, whenever I try to import one of my .gif files into movie maker, it gives and error message saying "the file could not be imported. Catastrophic Failure." It only does it with the one file because it still accepts my other .gif files. I've tried resaving the animation, but it still gives the same error message. The only thing I can figure is that the file is too large, even though its only 3,876KB. But I have no Idea why that would be a problem seeing I have been able to import Video footage that was 5,215KB and audio files that went uo to 25.6MB. Please help me. Tag: MM2 video capture problem Tag: 4169
  - 9
    - MMI_XP- Clips from VHS obscured by white bar??? Some VHS video feeds to MM1 are obscured by a horizontal white bar filling the middle 1/3 of clip image. In one case this occurred with every second clip ; in another every third clip and in another all clips were clear. All clips 'run' ok with sound but the white bars obscure the clips for short while. Has anyoone any idea what may cause this intermittent problem? TIA Tag: MM2 video capture problem Tag: 4166
  - 10
    - Need PapaJohn on hang problem In MM2 I select capture and then after the window comes up I try to cancel the program hangs. If I go to the alt+ctrl+del and try to end mm2 I get the send err message and it goes back to alt+ctrl+del window, I must force a hard boot to get out of it....Jerry Tag: MM2 video capture problem Tag: 4164
  - 11
    - using cancel hangs computer In MM2 I select capture and then after the window comes up I try to cancel the program hangs. If I go to the alt+ctrl+del and try to end mm2 I get the send err message and it goes back to alt+ctrl+del window, I must force a hard boot to get out of it....Jerry Tag: MM2 video capture problem Tag: 4163
  - 12
    - Capturing Profiles Not Found Hello There, For posterity, I think its important that this fix be listed here. For some unknown reason, Windows Movie Maker started complaining that "Capturing Profiles Not Found". The capture had previously been working flawlessly for some 6-8 months. After finding no reference to this issue on the web, a little toying found that installation of Windows Media Player 9 codecs solved this issue. PHEEWW! Lotsa luck! Regards, Josh Tag: MM2 video capture problem Tag: 4162
  - 13
    - Audio After Project is made into a Movie I'm experiencing audio problems on all of my movies. After working on a project, and then converting it into a movie (DV-AVI) file, the audio clips in and out. I've tried increasing and decreasing the size of the music file, it seems that the audio is suffering during screen fades and transitions. I'm running a 2.2Gig processor, 512DDR Ram, off a 18.2GB SCSI drive. During the project to movie phase, the processor is running at 95%to 100%. Any suggestions Tag: MM2 video capture problem Tag: 4157
  - 14
    - Macros for Movie Maker? Is anyone aware of macros capable of segmenting clips into adjustable durations? I'm using Movie Maker to prepare footage for behavioral analysis and need to insert blank screens at regulat intervals. Since I anticipate over 300 hours of tape, I'd like to automate the process as much as possible. Help/suggestions offered is/are appreciated. Tag: MM2 video capture problem Tag: 4151
  - 15
    - Editing VCR and Digital videos to write on DVD disc I want to edit a video from both a digital camcorder and a VCR tape. I have them copied to my hard drive. I am using both Dazzle Video Creator 80 and Sony software to capture my videos. They are both MPEG files. I have an external DVD writer dvd 300e model. This product and all of the above are new items. The HP Arcsoft ShowBiz is what I use to edit the files. PROBLEM: When I move video icons into the program it give me a message "This file format is not supported" The files are opened with RealPlayer or Windows Media Audio/Video" Neither will open. .. I have been on telephone with HP and they have gone thru all the trouble shooting they know. My computer is Dell and I have spoke with them. My computer is okay. PLEASE HELP! THANK YOU, Mary Tag: MM2 video capture problem Tag: 4150
  - 16
    - DV-AVI format Having a bit of difficulty with this format... When saving to DV-AVI format, MM2 saves the file at 352 x 288, even though the source file is 640 x 480. This is bad enough for video footage, but even worse for any titles/graphics I have added as they look appalling at this resolution. The only way I can save a movie at a high res (640 or over) is in WMV format, which is fine until I convert to MPEG2 for SVCD creation. Any ideas? Craig Tag: MM2 video capture problem Tag: 4145
  - 17
    - Audio problems when recording back to tape Help!!!! I have a problem with the audio track (background music) I added to my movie. First I muted the audio from the video so only the background music I added is heard. The video is edited with various clips from a longer video. When I try to put my project back to tape (from computer onto DV Tape), the audio I added jumps (interrupts) for a second. I think the original video audio is causing the problem and have muted it and done everything else but the music track still jumps when the video changes to a different scene. I even recorded the entire video back to computer so there would be not breaks in it and used it in a new project with the audio track and it still jumps. I can't figure this one out, someone please help Tag: MM2 video capture problem Tag: 4144
  - 18
    - microphone problems I was trying to test my microphone, but my system wasn't "hearing" me. I added voip; the program's wizard couldn't hear me either. I called my home phone, and I could hear me through my headphones, but I couldn't hear myself on the telephone.I ran the test wizard in Windows, but no sound registered. I can hear myself talking into my mic when I'm wearing my headset, so I think the hardware is OK. It seems like a software problem. I tried to create a wave sound from desktop, but no go there either. Any suggestions will be greatly appreciated. thanks! Tag: MM2 video capture problem Tag: 4143
  - 19
    - WMM2 crashes system Hello fellow hair pullers! Every time I load WMM2 and activate any function, my systme crashes, and I end up having to reset my computer. I can't even have task manager end the task. Nothing helps. Anybody have this problem? thanks! Tag: MM2 video capture problem Tag: 4142
  - 20
    - Emailing question I have a 1 minute movie that I would like to email. My question is, do I have to use the email function from Movie Maker? Can I send it it out as a MPeg using TEMPeg. That way anyone can watch it with whatever software they have ie qucktime, real player etc. What would be a good way to save it so it is small enough to email? I saved it to 'my computer', then used tempeg to create Mpeg file. It still appears to be large. Can someone enlighten me on the steps that would be best to email? Thanks Jim Tag: MM2 video capture problem Tag: 4132
  - 21
    - repeating error message Every time I open Windows Movie Maker on Windows XP, after I load my movie into movie maker it closes down and gives me an error message asking me if I want to send it to microsoft so they can help fix it. It happens every time. Tag: MM2 video capture problem Tag: 4126
  - 22
    - Saving to Sony DCR-TRV340 When I try to export a movie back to tape, my camera goes to record mode, the tape is running, but there is no video streaming to the tape. The camcorder screen stays blue for a least an hour (for a 2min video). When time line is completed I click finish but I have no video. When I rewind and view it, I have blue screen and every once in a while a partial picture. No sound no video. I have the latest FP for XP and latest MM2. I would appreciate ANY help in getting my video to tape. Thanks, Tom Tag: MM2 video capture problem Tag: 4123
  - 23
    - MOVIE MAKER 2 I downloded WMM2 from the download site, how do I know if its WMM or WMM2 on my computer. When I click help and properties what should it say? thanks Tag: MM2 video capture problem Tag: 4122
  - 24
    - Fade to black? PapaJohn said: Put a black still picture in the timeline and you can overlap it with the clip as long as you like. ---------------- Sounds like a plan. But where or how does one acquire a 'black still picture' and how does one 'overlap' a clip? I've been under the impression that dragging the left/right handles will not lengthen/shorten the timing of the clip. Tag: MM2 video capture problem Tag: 4121
  - 25
    - I can't send movies in E mails I installed a Samsung Digimax V4 camera and can send photos no problems in media. To start with everything worked fine, and I was able to send small video clips by e mail with movie maker. I now appear to be stuck on one particular movie, shot in may. Now, although I can load clips I've taken onto my own PC , any movies at all that I try to send, (even to myself) come out as this one particular movie dated back in May. I cant get rid of it. Even though the file properties show the new clips, when I send them , they still turn out to be this same one. The only possible explanation I can come up with is that in mid may, I got Movie maker updated to movie maker 2, I cant remember where from. I've a feeling the trouble stems from then. Is there a patch I need, or should I do a system restore back to may, as I dont know how else to remove Movie maker2. I'd prefer to uninstall MM2 rather than do a system restore. please advise me. Tag: MM2 video capture problem Tag: 4118

i am using hauppage wintv tv tuner card
and every time i start MM2 and do all the settings and at
the last step the software says that the video device is
in use but there is no other soft ware using the
software. accedently sometimes it lets me through but 99%
ofthe times not. and the times it lets me trough is
usually when i donot change any setting but push next all
the way through the wizard

Top