panning still photos

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - pictures freeze, audio continues I am trying to save a 12 minute project (made with movie maker) to my computer. When I click on "save to my computer", it saves it, but...when I play it , it has saved most of the pictures, but then it just stops showing the pictures but the music continues to play. Have any of you had this problem? Any suggestions, I need to burn it on a disk to play on a DVD player. Tag: panning still photos Tag: 17102
  - 2
    - Subtitles How do you add subtitles? Tag: panning still photos Tag: 17101
  - 3
    - Rename Codecs Version 1.5 Hi there, Owing to a couple of non related (to the program above) problems the release of version 1.5 has been delayed. I will still put it up for download, probably tomorrow now. The new version 2.0 release has also been delayed but should be available before the end of the month. In the meantime, here is the new write-up for the current program. ================================================= Your one-stop-don't-need-to-look-anywhere-else Solution is with a program called "Rename Codecs". Instead of reading miles of dross that is full of maybe's and perhaps's just run the program, it takes a few moments to identify all of the known codecs that cause this problem and gives you the opportunity of renaming them. You can then run Movie Maker and immediately determine if it actually was a codec issue. If it was a codec issue Movie Maker will now run properly. If it was not the issue, you have lost nothing more than a short amount of time. Whether or not it was a codec issue you must run the program once more and restore the problem codecs to their original names. The two procedures together can take less time than it did to read this message and a whole lot less than reading mountains of bumph that may or may not apply to you. The program "Rename Codecs" is free and available from my website. While there it would be a good idea to check out the tutorial on how to run the program...that will take around one minute of your time!!! Use this quick link to get there real fast http://tinyurl.com/3ewb9 ================================================= -- Best Wishes.....John Kelly www.the-kellys.org www.the-kellys.co.uk All material gained from other sources is duly acknowledged. No Value is obtained by publishing in any format other peoples work Tag: panning still photos Tag: 17093
  - 4
    - Muting sound on existing video Hello, We're trying to add narration to an existing WMV video file, but the sound of the original recording is causing use heartache. Is there a way to mute the audio on the video file while we're doing narration? Thanks.. Tag: panning still photos Tag: 17089
  - 5
    - Making DVD's Best SW? Does anyone know what the best DVD making software is out there? Thanks, Eric Tag: panning still photos Tag: 17084
  - 6
    - VCD easy works Well Hi, I used WMM2 for the first time this last week and made mothers day gifts for my mother and my wifes mother. Worked pretty well except when it came time to burn. I used nero at first and it had all sorts of problems with drivers messing with each other. I downloaded VCD Easy and it took care of those pretty well and burned them without any problems. I used FX Video conveter and it was pretty easy to use too. My question is there a way to get a menu on a VCD like in a DVD start up? Do I need to use Nero or some other software to do this? Jim Tag: panning still photos Tag: 17080
  - 7
    - PC to Camcorder choppy video I have edited some video in MM2 and have tried to send it back to the camcorder tape. The resulting video is a choppy mess with alot of blue screen. I know the answer is to reduce the amount of resources my PC is using. I have done this successfully in the past by following the steps laid out. The problem is I have lost this procedure and can't remember where I found it. I got the answer from this newsgroup about a year ago but the posts don't go back that far. Does anyone know how to free up my PC resources or read the archives of this newsgroup. Tag: panning still photos Tag: 17078
  - 8
    - thank you Tom Thank you Tom, I must be dumb or something, I had never noticed that the option was there all the time (old age I guess) thanks again Tag: panning still photos Tag: 17077
  - 9
    - 24 hours effect Hi all, Is it possible to split the screen in four parts and put a different movie in each of these parts like the "24 hours" serie? thanks beforehand, Abdelkrim Tag: panning still photos Tag: 17072
  - 10
    - help how to send video clip i just done a short video to send to a freind and was put on to you saying there was a error Tag: panning still photos Tag: 17071
  - 11
    - "WMM 2" works with win 2000? hi I would like to know if windows movie maker 2 works with windows 2000 or just with win XP? Tag: panning still photos Tag: 17065
  - 12
    - clips from movies Im trying to do a project for History on the Irish Republican Amry. There are many clips from a movie that i would like to incorporate into my project. I was wondering if there is some way to get a movie onto my computer and take certain clipas and scenes from it. Ive seen it on a past students project but can't figure out how they did it. PLease help if you know anything. Thank you . Tag: panning still photos Tag: 17062
  - 13
    - songs and voices (audio) Hi. I'm trying to add voices over a song I have playing in the background. How do I go about doing that? Email me if you can please help Thanks Jess Tag: panning still photos Tag: 17061
  - 14
    - Video is glitching When i save the movie, and watch those little boxes that are like glitches are on the video. I know before when i've saved it hasn't happened. Tag: panning still photos Tag: 17060
  - 15
    - Troubleshooting Saving Why won't my whole movie save? I play it and only a few clips are shown and then the screen goes blank and the sound continues... Tag: panning still photos Tag: 17059
  - 16
    - joining wmv files Is there anyone who knows any other way of joining wmv files other than using windows movie maker? Tag: panning still photos Tag: 17058
  - 17
    - ...................................................................................................................................................................................................................................................... ................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................. Tag: panning still photos Tag: 17057
  - 18
    - Won't Run ( Cannot Find File Specified ) I installed mm2 and when I go to run it it gives me the error ( The System Cannot Find The File Specified ). It doesn't start period.. I re-downloaded 3 times and reinstalled about 5-6 times. Tag: panning still photos Tag: 17055
  - 19
    - MM2 Upgrade I just received my upgrade XP disc from Microsoft to upgrade to Movie Maker2 and Windows Media 9, I currently had Movie Maker. My question is that when I go into MM, it seems to be the old version. I am trying to save a project to an .avi format, I am under the impression that MM2 will do this, where the old version did not. Do I need to uninstall the old version of MM? (it was installed with XP when I bought the PC). I hesitate to do this as I do not want to delete shared files. Tag: panning still photos Tag: 17052
  - 20
    - split screen I'll try to get it right this time. Earlier I asked if anybody knows how to use the special effets to make a split screen clip at the end of a video (video on the left and scrolling credits text on the right) I can use the help. Thanks Tag: panning still photos Tag: 17051
  - 21
    - split screen How do I do that split screen effect at the end of a video with video on the left and scrolling credits on the right Tag: panning still photos Tag: 17050
  - 22
    - Movie Maker/media player I am living in Mexico, so cannot get regular help, am old- ish, more just a user than a geek! Help!! I am trying to make a movie with audio & video. Can make the CD movie, but can only play it on computers that have WIN Video Player installed. Have tried 4 different home type CD/DVD players around here with no luck Is this an endemic problem? Is there a way around this? I am trying to do this for a dive business & am totally stuck. Can't just go out & keep buying players until I find a compatible one! Am using all digital camcorders, so no problem with analog conversion. someone help please?? Thanks Vern Tag: panning still photos Tag: 17040
  - 23
    - Strange behaviour on dv-avi files I report here something strange I have noticed with MM2. My input file is a 5 min long standard dv-avi file created with another editing program (MovieXOne). The file is inserted in the MM2 time line. When rendered as is to dv-avi, it takes about 3 minutes to render and the quality of the output file seems perfectly unchanged as compared with the original. But if a simple fade out to black effect is applied (it should only affect the last seconds of the video), the rendering takes about 20 minutes and the quality of the output file is clearly affected during the entire movie (a sort of "grid" of pixellisation appears slighlty but clearly on the entire movie). The workaround I had to apply is to cut the movie into two pieces: a big one of 5min-3 sec. and a small one of 3 seconds on wich the fade out is applied. Some ideas about that strange problem? Michel Tag: panning still photos Tag: 17037
  - 24
    - split screen of course I meant video on the left and credits on the right LOL Tag: panning still photos Tag: 17036
  - 25
    - split screen How do I do that split screen effect at the end of a video with video on the right and scrolling credits on the right. Tag: panning still photos Tag: 17035
- Next
  - 1
    - No audio from VCR to PC I'm trying to convert a VHS tape to an avi using Movie Maker 2 and for some reason I am only getting video and no audio. Is there a special setting I need to have for VHS? Thanks for your time. Tag: panning still photos Tag: 17019
  - 2
    - credits Movie Left in the credit options in movie maker 2.0 their is an option to have credits with video on the left. I have tried everything that i can think of. How can i add video to my credits using the credits movie left option please help thank Tag: panning still photos Tag: 17018
  - 3
    - Wont save Whenever I try to publish my video, it stops. Not freezing, just stops... I mean I'd have it save, and it'll go to like 56%, then stop altogether... I thought it was just going slow, so I left it unattended for about 5 hours... well it was STILL at 56% and reading '258 minutes remaining what should I do Tag: panning still photos Tag: 17016
  - 4
    - codec i was wondering how do i download new codec for windows movie maker? Tag: panning still photos Tag: 17015
  - 5
    - movies how come when i try to play a downloaded movie from lime wire that Windows media player says..."ClassFactory cannot supply requested class."? i want to be able to watch my movie...but it wont supply it...why? Tag: panning still photos Tag: 17013
  - 6
    - mp3 importing error I haven't been able to import mp3 files ever since I've been workin' i WMM2. Giving me error mess. saying " nameofthesong.mp3 is not vali because it does not contain any information." I've tried everything know but no luck so far. I have several movie programs that are having no problem importing mp3. This error only happens in WMM2. Can anyone help? Thanks Tag: panning still photos Tag: 17012
  - 7
    - How speed up frames ? When dropping still photos to the bottom and then rewinding, how can I speed up the play back? Right now real slow. Tag: panning still photos Tag: 17011
  - 8
    - Freezing up Same things happening to me every 7 min it freezes! is there any up dates? Tag: panning still photos Tag: 17010
  - 9
    - Keeps crashing Hi: Got a problem. Downloaded movie maker 2 for Xp. Everytime I try to add a video transition or effect the program crashes. What he heck is happening here? I run a 2.4 Ghz processor and 1 gig of ram. Need some help. Please. I read this program can't be uninstalled. What the heck do I do now??? Anyone - please advise. Thanks. Doug Tag: panning still photos Tag: 17007
  - 10
    - John Kelly What happened to your site, dude www.the-kellys.or Tag: panning still photos Tag: 17006
  - 11
    - Thank you PapaJohn Thank You PapaJohn for your great web site. I have learned a lot from it. I also have been using Sony Movie Studio and wished you had a web site for that software. I am learning slow but sure and with someone like you willing to take your time to help others should get a THANK YOU. George-NY Tag: panning still photos Tag: 17004
  - 12
    - Crashing all the time Hi, every time I try to add a transition movie maker crashes. I have 512MB of DDR RAM. Do I need to buy more memory What other software is there that is better than this? Tag: panning still photos Tag: 17002
  - 13
    - freezing up While making a movie or while viewing the movie, my windows movie maker just freezes up and I can not do anything but control-Alt-Delete. It does it about every 10 minutes. How do I fix this? Tag: panning still photos Tag: 17001
  - 14
    - converting vcr tape Questions/advice wanted 1. I want to convert an analog VCR tape to a digital format that can stay on a computer and be watched by folks (sit on a server) - any recommendations? 2. The tape is about a half hour long, any suggestions on how to keep the file size to a minimum 3. I would need this to be viewable from a variety of computers (win 9x/2000), any suggestions on the most compatible format? Tag: panning still photos Tag: 17000
  - 15
    - curious dvd format query having made my finished movie/soundtrack bonanza using movie maker, i want to burn it onto a dvd to play on any dvd player. the program that came with my computer is sonix MyDVD which is verrrrry basic, and very frustrating (for example, all the fancy backgrounds are all well and good - but what about a basic b&w background for a clean and simple look??) so i am feeling frustrated (as usual!) by my lack of knowledge about what my options are. are there any programs anyone on here could recommend? or is there anyone familiar with the program i am using who could offer advice (if there is any) on altering the themes and placement of the menu buttons. i am feeling lost and bleh. adrienne. Tag: panning still photos Tag: 16994
  - 16
    - MovieMaker hangs when importing video from Sony DCRHC30 I am trying to import video from my new Sony DCRHC30 digicam. The import seems to work okay (I see the images in the preview window, etc...) but then the app hangs after the dialog entitled "capturing video" appears. The "time" bar goes all the way to 100% and the timer counts down to 0 time remaining and then ... nothing. It doesn't take the whole PC down with it (which is good), but I need to use Task Manager to quit the app. Any thoughts out there? Joe Girardot jwgirardot (at) aol.com Tag: panning still photos Tag: 16977
  - 17
    - Unstable Movie Maker 2 Hello We are using Movie Maker on about 20 computers at our University to edit Video. It seems though that we will have to change over to another program. Movie Maker turned out to be extremely unstable. Especially during the capturing process the program and even the computer would restart without any warning. We have tryed it on many different types of computers, with anything (drivers and software) updated. There seems to be no pattern in this. Even when working on (rather big though) project, the computer would just anytime restart Does anyone have similar excperience? Any hints Thenks very much Manfred, ReykjavÃk/Iceland Tag: panning still photos Tag: 16976
  - 18
    - =?Utf-8?B?44GT44GG44GY?= Tag: panning still photos Tag: 16965
  - 19
    - =?Utf-8?B?44GT44GG44GY?= Tag: panning still photos Tag: 16964
  - 20
    - Chapters in Movies How do I go about making Chapters in my complete film? I am burning to DVD, and want to make chapters. Also, is it possible to make a menu where the viewer can select chapters like a normal DVD? Tag: panning still photos Tag: 16963
  - 21
    - How to extract time and date info from DV clips in Movie Maker to a text file or DVD clips? I've captured my DV tape and selected create clips which gives a nice list of the scenes by date. Now, how can I archive the time and date info? I've tried cut/copy/drag/drop to get it into notepad, no dice. Any ideas? Btw, my end goal is a presumably common one, I want to archive my home dv movies into DVDs (the compression is ok), but while preserving the time/date info. Ideally, each clip would be a separate DVD chapter or title with the date as its name? Why is this so hard?.. waaahhhhh! :) (I tried exporting to wmv and re-importing to see if it retains the time/date info. It doesn't, so if you back up your tapes to wmv, you lose it.) Tag: panning still photos Tag: 16962
  - 22
    - Fuzzy Photos I am using Movie Maker to make a slide show of stills. My stills are very high res but are appearing quite blurry in the full screen view. Is there a way to make the images smaller - with some frames around the or whatever - to keep them in sharp focus? Tag: panning still photos Tag: 16960
  - 23
    - Audio and Video How do you change the settings from audio only to video and audio when recordinh in movie maker? Where is the source material type located? Tag: panning still photos Tag: 16959
  - 24
    - Burning movie project to a DVD I'm new to Windows Movie Maker, so please bear with me. I've downloaded digital video from my Sony video camera to Windows Movie Maker, saved as "High quality video (large)" so I could burn it to a DVD for playback on a DVD player. My PC's OS is Windows XP. I've edited and added a soundtrack and am ready to burn it to a DVD. I have a Sony DRU-530A external DVD burner. Movie Maker has saved my project with the *.MSWMM file extension, I saw no other options, and I do not see an option in Movie Maker to save my project to a DVD. When I attempt to use the Sonic "MyDVD" software (version 5.2.1) that came with the DVD burner it will begin to encode, but will then give the following error message: One or more files could not be imported: MyDVD does not support this file type. Check the user guide for details on support files." It appears that MyDVD does not recognize the *.MSWMM extension. Any idea of how I can convert my completed Movie Maker project to say, an .AVI file, or any other hints on how to burn this project to a DVD? Tag: panning still photos Tag: 16957
  - 25
    - where's the audio How do I find or access the audio portion of some video I've imported from my VCR? The video comes through find but there doesn't seem to be any audio. Tag: panning still photos Tag: 16956

Does anyone out there know if it is possible to pan left
to right on a still photo (frame) using movie maker 2?

Re: panning still photos by PapaJohn

PapaJohn
Thu May 13 16:24:27 CDT 2004

Yes, with the pan/zoom package of special effects from Pixelan.... there's a
link on my Setup > Software page.

It's a commercial package, not a free download, and the effects work great.

Another way to do it would be to create the panned clip in PhotoStory 2 and
import it into your MM2 project..... Again, it's a commercial product, not a
free download.... and it works great.
--
PapaJohn

Movie Maker 2 - www.papajohn.org
Photo Story 2 - www.photostory.papajohn.org

.
"Iceman11" <anonymous@discussions.microsoft.com> wrote in message
news:ccda01c4392e$5c2cdf60$a501280a@phx.gbl...
> Does anyone out there know if it is possible to pan left
> to right on a still photo (frame) using movie maker 2?

Top