newbie - video capture

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - trouble with movie maker 1 Hi again OK first thing I can't get my video right side up, Its play properly during the preview stag but after it gets save it plays upside down? (I've upgraded my direct X to 9B and still now good) aswell as when I atempt to use the video effects it closes the program down? I've tried pappajohn.org site but that didn't have my problem so it didn't help me. Anyone have any other suggestions on how to fix this problem? Tag: newbie - video capture Tag: 12895
  - 2
    - Use of .mov files Why isnÂ´t it possible to use .mov files in Movie Maker Does anyone have a proposal about which videoformat I can use insted with the same picturequality? Tag: newbie - video capture Tag: 12891
  - 3
    - vhsc I also have vhsc and wanted to transfer into mm to make movies. I click on capture video with my camera hooked up with "S" cord...to back of computer (Dell 4400) . I get it telling me that video device cannot be used because there was an error in starting the device What do I need to do? Tag: newbie - video capture Tag: 12886
  - 4
    - Choppy Playback The playback of clips and timeline come out very choppy which makes it difficult to edit with more precision. Does anyone know of any reasons for this? I'm running a PIII 850 with 256 MB RAM. Thanks Tag: newbie - video capture Tag: 12880
  - 5
    - Oversize FAT source files I think I overdid it... I managed to capture a 4+ gig source file (35 mins on DV-AVI setting) onto my old second HDD which is FAT. I keep meaning to upgrade it to NTFS...one day. The clips arrived OK in my Collections, and will load in the preview window, but both video and audio are badly scrambled when played. Does this sound like a symptom of an oversize FAT file, or do I have some other problem? How exciting, my first problem of any significance in a year of using MM!! Tks CW Tag: newbie - video capture Tag: 12879
  - 6
    - Wild Tangent Web Driver Does anyone knows how to get rid of this? When I shut down the PC, first the Norton box comes up as if it was frozen and I have to click end now, then after I hit end now on that window I get the Wild Tangent Web Driver message to close out. I tried removing from Control Panel but it appears it won't go away. Can someone help me with this? Tag: newbie - video capture Tag: 12878
  - 7
    - How do I reinstall MM2? I have windows xp with service pack 1. Downloaded last MM2 update now program wont run. Tag: newbie - video capture Tag: 12876
  - 8
    - Hardware acceleration & DirectX 9 PapaJohn very helpfully describes on his site how it can help to reduce hardware acceleration to notch 3. This adjustment did seem to help, particularly when editing a large project. At the end of this explanation I think he says that if DirectX 9 is in use, this tweaking of the acceleration is not necessary, but I'm not quite clear on that. I have recently downloaded v9 (by the way it's a biggie, took most of the night on my 56k connection) so I'd like to check if there is still any need to juggle the acceleration, or does v9 contain bits that render this no longer necessary? Many thanks CW Tag: newbie - video capture Tag: 12875
  - 9
    - Panasonic Nv-DA1EG wird nicht erkannt Operating System: Windows XP-SP1 Rechner: Dell XPS B (933) PCI Karte: Lindy USB 2.0 & IEEE 1394 combo Wenn ich meine Panasonic NV-DA1EG anschliesse, wird der Camcorder von XP nicht erkannt. Wenn ich den MovieMaker starte, ist keine "source" vorhanden. Kann jemand helfen? Tag: newbie - video capture Tag: 12870
  - 10
    - CD won't playback in other computers I just started using Movie Maker. I am trying to create a CD with titles, pictures and audio in the background. I save to a recordable CD and it gives me a WMV file. The CD plays fine on the computer where I created this project with media player (version 9). However, when I play the CD on my laptop or other computer, media player recognizes the file, there a one quick error message about downloading and then it plays the file with no audio or video. These other computers have media player versions 7 and 8. In the About Help my movie maker shows version 5.1 and also version 2.0.3312.0. I checked out Papa John's site but could not find answer to my problem. The site mentions saving to DV-AVI format but when I try to save I do not see any format options. The file defaults to WMV. Please Help! Tag: newbie - video capture Tag: 12864
  - 11
    - New User Reports In This is a multi-part message in MIME format. ------=_NextPart_000_00D2_01C3FF82.FBD30D90 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Over 99.9 percent of the people who download MM2 do not read this = newsgroup or post to it.=20 It's easy to read the postings and get a negative feeling.... that's = because the issues needing resolution get posted, but positive results = don't. Most of the email I get about Movie Maker is to report positive = experiences rather than to ask for help..... sometimes I'll attempt to = find out what's happening with those who don't post, and find that they = don't have sufficient issues with MM2 to make a post. I have a brother in Texas who never used Movie Maker until yesterday.... = he doesn't read or post to this newsgroup.... here's the text of an = email he sent last night. I thought I'd post it to get my March postings = off on a positive note. PapaJohn =3D=3D=3D=3D=3D=3D=3D2/29/03 - PapaJohn's Brother Jim = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D "Finally picked up a Fire Wire cable and hooked up the digital camcorder to the computer. Had no problems at all with Movie Maker 2 and was able to take the one-hour video from our December trip add titles, transitions and credits in no time at all. Sending the completed move back to the camcorder took almost 2 hours with the prep time. The end results were great and Linda liked the "polished" version of her video." =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D ------=_NextPart_000_00D2_01C3FF82.FBD30D90 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT face=3DArial size=3D2><FONT face=3DArial size=3D2>Over 99.9 = percent of the=20 people who download MM2 do not read this newsgroup or post to it.=20 </FONT></FONT></DIV> <DIV><FONT face=3DArial size=3D2><FONT face=3DArial = size=3D2></FONT></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>It's easy to read the postings and = get a=20 negative feeling.... that's because the issues needing = resolution get=20 posted, but positive results don't.</FONT></DIV> <DIV><FONT face=3DArial size=3D2><FONT face=3DArial = size=3D2></FONT></FONT> </DIV> <DIV><FONT face=3DArial size=3D2><FONT face=3DArial size=3D2>Most of = the email I=20 get about Movie Maker is to=20 report positive experiences rather than to ask for = help.....=20 sometimes I'll attempt to find out what's happening with those who = don't=20 post, and find that they don't have sufficient issues with MM2 = to make a post.</FONT></FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>I have a brother in Texas who never = used Movie=20 Maker until yesterday.... he doesn't read or post to this newsgroup.... = here's=20 the text of an email he sent last night. I thought I'd post it to = get my=20 March postings off on a positive note.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>PapaJohn</FONT></DIV> <DIV><FONT face=3DArial size=3D2><FONT face=3DArial = size=3D2></FONT></FONT> </DIV> <DIV> </DIV> <DIV><FONT face=3DArial size=3D2>=3D=3D=3D=3D=3D=3D=3D2/29/03 = - PapaJohn's Brother Jim=20 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D</FONT></DIV> <DIV><FONT face=3DArial size=3D2><FONT face=3DArial = size=3D2></FONT></FONT> </DIV> <DIV><FONT face=3DArial size=3D2><FONT face=3D"Times New Roman" = size=3D3>"Finally picked=20 up a Fire Wire cable and hooked up the<BR>digital camcorder to the=20 computer.  Had no problems at<BR>all with Movie Maker 2 and was = able to=20 take the<BR>one-hour video from our December trip add = titles,<BR>transitions and=20 credits in no time at all.  Sending<BR>the completed move back to = the=20 camcorder took almost 2<BR>hours with the prep time.  The end = results were=20 great<BR>and Linda liked the "polished" version of her=20 video."</FONT><BR></FONT></DIV> <DIV><FONT face=3DArial=20 size=3D2>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D</DIV></FONT>= </BODY></HTML> ------=_NextPart_000_00D2_01C3FF82.FBD30D90-- Tag: newbie - video capture Tag: 12859
  - 12
    - WMM1 I have a two part question, 1. when I preview a video from my camcorder it shows the video upside down how can I fix it so it uploads right side up? 2.when I use the effects it shout down wmm? Thanks for your help. Tag: newbie - video capture Tag: 12858
  - 13
    - video problem Hi, I am using a Dell dimension 4550, NTFS HD 30 GB, Windows XP Home, CPU 1.8 GHz, 128 MB RAM, NEC DVD+RW ND-1100A, WMM2 and WMP9. Due to the insufficient RAM of my computer I have to disable some services of "Windows Services" while editing movies in WMM2 and do some changes (increasing) in the page file. I have transfered some videos from my Sony TRV- 19 through firewire to my computer in DV-AVI, have made movies using WMM2 and saved them to a CD with no problem in the past month. Usually I make sure that I have the following services to edit movies with WMM2 and for a possible need for troubleshooting while editing : 1- Windows Audio 2- Logical Disk Management administrative Sevice 3- Logical Disk Management 4- IMAPI CD-Burning Com Service 5- Workstation 6- Removable Storage 7- Plug and play 8- Remote Procedure CAll (RPC) Locator 9- Remote Procedure CAll (RPC) 10-System Restore 11-Windows Image Acquisition (WIA) 12-Windows Management Instrumentation I converted some movies (.dat files) to MPEG using "VCD Gear 3.5" and imported them to WMM2 to edit. WMM2 and WMP9 play the MPEG movies with no problem ( I have the codecs and etc.). I have got two problems: 1- After I save the final movie that I make with WMM2 to a CD either there is no video at all or there is some but not all that i have made with WMM2, in WMP9 window. I have the audio for the movie even for that part that I don't have the video. so I hope somebody can help me to solve this problem. 2- During the editing of the movie I clicked on one of the clips in the storyboard in WMM2 and tried to play it but for a long time it did not play so I decided to close the WMM2 using X on it's window and all of a sudden I got a message saying that due to a serious problem windows has been shot down to prevent any damage to your system and so forth (i have got the same message two more times in the past). At the bottom of the page It was dumping the physical memory. Now I have got a file named "dumprep" in my MSCONFIG. I know that it is the reporting tool to microsoft but I don't want to use it so I tried to remove it from MSCONFIG (startup programs)using regedit and deleting it from the RUN folder and msconfig folder in regedit, but it is still there and I would appreciate any comments on removing it. so sorry that my message is a long one. thanks for your help in advance. cheers Tag: newbie - video capture Tag: 12857
  - 14
    - Timer / Stopwatch Overlay Is there any way of adding a timer or stopwatch overlay onto a clip Since I cannot find any obvious built-in facility to do this, are there any add-ons anywhere I can download/buy to do this If not, does anyone know of any other (preferably free) products to do this TIA Andy Juniper Tag: newbie - video capture Tag: 12849
  - 15
    - How to reverse / play back clips backwards? Am I, or in fact my kids being a bit dense - is there a way to play clips in reverse - so, for example, import a clip of me jumping into the swimming pool, and then play it forward as a clip, and then play it backwards so in effect, I come back out of the water on to the side of the pool. I know this was probably best done at the import stage - but do not want to go through all the importing of clips again! Regards WC Tag: newbie - video capture Tag: 12848
  - 16
    - Any Way To Print??? Is there any way to print story boards, or portions of story boards, to include titles etc. for review and/or other uses? Maybe a way to use another Microsoft (or other brand) tool to do this?? Thx-sd Tag: newbie - video capture Tag: 12846
  - 17
    - Creating Clips wont work I am trying to create clips automatically in WMM2. When I right click the .AVI file in my collection and select "create clips" it chugs along for 10 minutes but creates 0 clips. It is imported via firewire from my miniDV camera Thanks for your help! Tag: newbie - video capture Tag: 12844
  - 18
    - recordable cd drive not detected I have recordable cd as well as recordable cd/dvd drives on my computer that I have used with a couple of other video and slideshow programs with no problems. What is it with MM2? I get the message recordable CD drive not detected. I have tried all the suggestions in MM2 Help. Tag: newbie - video capture Tag: 12833
  - 19
    - mm2 Whenever I try and save a movie using "other settings" on the computer section, the program closes and I cannot save into any other format than wmv - I need to save in a different format to make a DVD with Sonic My DVD. Any ideas? Thanks. Tag: newbie - video capture Tag: 12827
  - 20
    - Movie won't display using InFocus Projector I created a movie with Movie Maker 2 and saved the movie to my hard disk. If I play the movie with Windows Media Player it is just fine on the display. However, if I connect an InFocus Projector to the video out port on the computer and try play the movie the following happens 1) The windows desktop projects just fin 2) The Movie Maker application displays just fine, however.. the video shows on the computer but not on the projector. THe projected image just shows a blank/black picture wher the movie should b Computer: Compaq Armada M30 Windows XP Professiona Projector: InFocus Model 34 Anyone have any idea what I am doing wrong & how to fix it? Tag: newbie - video capture Tag: 12826
  - 21
    - SOUND SYNC ISSUES Everytime i cature A Movie from Camcoder...The Audio was way out of SYNC. Why Is that My system has 1.25gb Ra 2.4 ghz AMD , ASUS 333mhz frontside bu 120 Gig HD Nvidia Ge-Force 4 64 mb Video Car SB live Compatible! Sound Car WIN XP pro Tag: newbie - video capture Tag: 12825
  - 22
    - dazzle dvc 150 or pinnacle moviebox usb Has anyone used the dazzle dvc 150 or pinnacle moviebox usb product with moviemaker 2.0? Tag: newbie - video capture Tag: 12822
  - 23
    - picture quality gets worse the picture quality of my videos get really bad after being on my computer. i upload the video as an avi-dv file but after a while the picture gets aload of squaresin it and can be difficult to see Tag: newbie - video capture Tag: 12821
  - 24
    - I get really poor quality results grainy and no audio Greetings to all, I have a great little JVC DVL-100 MiniDV camera and have downloaded my tapes to Windows movie maker 2 successfully. The edited version of the movie outputs to the camera (After 6 hours of rendering) but the camera records no audio and the quality is horrible. I have cleaned the heads on the camera ...made sure that the volume was working from recording other things....and the correct cable is tight and right. I had Pinnicle studio 8 installed and it was lousy too. I have a 1.25 ghz processor...an evga 5600xt video card and the new sonic blaster audio card. I even installed a new 80gig hard drive just for video. I have updated all of the drivers and they work great on everything else......PLEASE HELP this frustrated producer....Thanks !!! Steelworks@Comcast.net Tag: newbie - video capture Tag: 12813
  - 25
    - Linking Sony PC100E to my PC Total novice taking first steps with Windows Movie Maker ..... and with PC100E Sony Sony make whatosever no mention of linking Camera to a PC in the instructions, only to a TV, things have obviously moved on since we bought the camera in 2001 .... Am I right in thinking that I need an S-Video cable, same both ends is it were ? There's an S-Video (4 round-pins, plus one oblong, yes ?) socket on the camera, and a similar one on what I take to be the Video Card, since the exit for the screen comes off just next door. There's also a 3x8 and 2x2 socket on the PC, so 24-pin and 4-pin on the same plug apparently Which is the best way to transfer, and is a Video card such as a GeForce FX5200 adequate/compatible with what I'm trying to do Many thanks Rory (Montpellier, France) Tag: newbie - video capture Tag: 12809
- Next
  - 1
    - Movie Maker 2 I have a problem with saving under the Windows Movie Maker 2. It will absolutely will not allowing me to save the new movies file (clip) that I do, in any option e.g. hard disk, cd, e-mail etcâ?¦. But I can save the project no problem. The message that I get reads : â??Windows Movie Maker cannot save the movie to the specified location. Verify that the original source files used in your movie are still available, that the saving location is still available, and that there is enough free disk space available, and then try againâ?? The answers are all yes, files still available, location available and enough space HELP! THANK YO Tag: newbie - video capture Tag: 12802
  - 2
    - Follow up on Metallic Audio Its taken ALOT of time, but I think I have figured out what the problem is. It seems that my DV codec is outputting the audio at 48khz instead of 44.1. I don't think windows Movie Maker supports 48khz audio, and thus I get this bad quality. I ripped a track from a cd at 48khz, and it would play fine in Winamp, but in MovieMaker, the file gets that metallic quality about it, even before the movie is produced. It remains the same when outputting the movie file. I believe that this occurs when a file is converted between sample rates, wether it be 44.1 to 48 or 48 to 44.1. There is no setting under System>Device Man>Sound Video Controllers>Video Codecs>DV soft that lets me change the audio quality. How can I fix the problem knowing this new information? ~~~~~~The original post is below. Well I tried to change the audio to an mp3 with a bitrate of 320 encoded from a wav with 1141. Then I tried to use the wav-file as the audio source. Both times, the audio came out the same buzzy metallic sound. Is there something elso I can do? "The Disney Source" <webmaster@disneylandsource.com> wrote in message news:pXhXb.176258$U%5.837726@attbi_s03... > Typically this "metallic" sound comes from a low-bitrate on the audio > encoding and the compression of WMV makes it sound tinny. People rarely pay > attention to the audio bit rates, and usually the program default is quite > low to leave more bandwidth to the video. In most programs you can specify a > specific bitrate for audio encoding. Depending on what you're doing, you may > be able to do the audio in mono, but choose a higher bitrate. This happens > to me a lot, I encode a huge file, but once I get to editing it, I figure > out I don't like the audio quality and have to start from scratch. > > - Chris > > > "HaTcH" <urmom@hotmail.com> wrote in message > news:#zk5cup8DHA.2832@tk2msftngp13.phx.gbl... > > I have been making movies and saving them as DV-AVI files. Now, the > problem > > i'm having is rather difficult to explain, but when playing back the avi > > file, where the audio bass peaks, it seems to have been cut off and left a > > wierd metallic sound, kindof like a buzzing. It matters not what format > the > > original audio is. WMV files are played back flawlessley. I uploaded a > clip > > of an arbitrary file i made as an example, from john lennon's imagine: > > http://zoids3d.bearcreekfire.com/downloads/soundexample2.mp3 (>500kb) > Listen > > closely to the lower frequency and you'll hear what im talking about. > Thanks > > for anyhelp if I don't manage to reply. > > > > (Microsoft: Include an option to select your own codec/bitrate/file type, > > and I'll back yah some more!) Tag: newbie - video capture Tag: 12795
  - 3
    - Now MM1 doesn't work either!!! New XP Pro install. I know that MM1 was working at some point as I used it to test video capture from my Radeon VIVO after updating it's drivers as part of the install. I then went on to install/update other drivers etc. for additional hardware, including both my Creative Webcam and my Fuji digital camera (that can be either a drive or webcam). After all the dust settled, got all the "critical ..." etc., I then upgraded to MM2. MM2 hangs at trying to capture a video, never displaying the video source dialog box. Thankfully hitting the "Close" (big red X button) allows me to terminate it. Given the above, I followed prior instructions in another thread and expanded back out MM1. MM1 also now hangs! Even worse, refuses to terminate. It's at least a log off and appears a system reboot may even be required to completely purge whatever muck-around it's caused. (when are we going to get that OS they keep talking about that's supposed to NOT, I repeat NOT, allow this to happen ... argh!!!) It appears to be some problem simply getting the attached video input devices selection dialog box to appear. Enumeration problem? I do know, no other software appears to be having this problem. I can select from any of the input sources in MSMessenger and a number of 3rd party apps includng even a little program I wrote myself a few years ago. Who knows, who cares? All I know is that I've got something similar to useless garbage laying around on my system that's absolutely worthless and there seems to be little I can do about it. It wears thin real fast when beta software gets included and advertised as one of the big plus's in a product. We've all seen MM "demonstrated" within some XP ad touting it's features etc. They seem to fail to mention 'If it works for you' as a disclaimer. Tag: newbie - video capture Tag: 12789
  - 4
    - Why does it just quit? Whenever i try and add a image transition or affect onto a clip Windows Movie Maker 2 always shuts down on me. Does anyone know why and how to stop this from happening so i can create something without it crashing on me? Thanks. Tag: newbie - video capture Tag: 12785
  - 5
    - Runtime Error when I try to bring in a AVI video into my collection, I receive "Microsoft Visual C++ Runtime Library Runtime Error" Program C:\Program\MovieMaker\moviemk.exe The application has requested the Runtime to terminate in an unusual way. Please contact the application's support team for more information. I have 256 MB DDR SDRAM, and up to 32 MB shared video memory. I don't know what Vram ism, but it suggests 64 is this the problem? Tag: newbie - video capture Tag: 12784
  - 6
    - Multiple_Language How to make a Multiple_Language with Windows movie maker? Tag: newbie - video capture Tag: 12783
  - 7
    - Movie Maker DVD Recording I need a program that will work with movie maker to I can burn DVD's. Are there any good programs that won't cause major problems with the computer (XP) and won't break the bank. Personally, I enjoy using Windows Movie Maker for its use and I don't want to buy a entirely new program. Thanks for any thoughts. Tag: newbie - video capture Tag: 12782
  - 8
    - 123456 Tag: newbie - video capture Tag: 12780
  - 9
    - proble with mm2 after my computer downloaded the new updates from windows website, and after updating MM2 with the updates every time i try to open it, it opens and everything but when i try to view or choose a video trasition or do anything with video editing it shuts down. I know many ppl are having this problem. after they did the update. so if you have any idea how to fix this problem please let me know. I have tried redownloading mm2 plus have a friend send me their files thinking mine my have a problem but nothing works. Tag: newbie - video capture Tag: 12778
  - 10
    - Changing Titles text positition is that possible in MM2 I'm editing an birth video, and there is a little problem. I want to add a text with the telgraph text roller at the bottom of the video, the original template in mm2 it's a bit uppwards and when i use it, it will show my wifes "holy grail" to all that watches the video. Is it possible to change possition to censor that? if i zoom the video the whole scene will be useless. Any ideas? Have a nice day! Marcus Tag: newbie - video capture Tag: 12777
  - 11
    - avi on movie maker 2 When I had mm1 my files came out with big AVI extensions and I could convert to mpeg2 and burn them on SVCD. Now I have mm2 and my files come out with little avi extensions, and I cant convert them to mpeg1 or mpeg 2. My camcorder is a mini DV device and captures video through IEEE controller. Is there anyway I can capture or save my projects as a big AVI extension. Thank you. Tag: newbie - video capture Tag: 12772
  - 12
    - Possible...??? is it possible to save your collections just in case someone delets them...? Tag: newbie - video capture Tag: 12765
  - 13
    - Movie Record Time All I want to do is transfer my 8MM tapes to DVD's. I am converting my Analog Tapes through a digital coverter box and the picture shows up on the screen. However, the record stops after a couple minutes, and I would like to record the whole 60 minutes to the harddrive and then copy that to the DVD recorder. Any ideas? Michael Tag: newbie - video capture Tag: 12763
  - 14
    - Recording audio form analog(reel to reel) Does anyone know how I can use MM2 to record audio? I have some r-r tapes Iwould like to transfer to cd but have had no success. I am using a Dazzle dvc80 (fancy cord) and I can record to Moviestar 5 but i stores the files as MCS and I get as far as media player playing the capture but it won't send it to a disc. It says it(media plater 9) can't read the file but it will play. Any help. I am considering PAYING for a recording program. Any help there? Help. Please and Thank you Tag: newbie - video capture Tag: 12757
  - 15
    - MM2 quits at end of loading mswmm Hopefully someone can help with this: When I want to re-open the project I am working on, MM2 loads much or the whole of the file, but before opening it, I get a pop-up saying: "Microsoft Visual C++ Runtime Library Runtime Error! Program: C:\Program Files\Movie Maker\moviemk.exe abnormal program termination OK" After pressing OK, MM2 quits. I tried to open an older project I still have, one which refers to pics and vids no longer there, and that file opens faultlessly. I also went on PapaJohn's excellent site, and following suggestions there, I increased the page file size, I cut down hardware acceleration to level 3, and I renamed all .ax files I found listed on the site. Unfortunately, nothing of that helped. Admittedly, this time my project is much larger than previous projects have been. It includes some 275 jpeg's and about 150 avi's. My computer has 2000Mhz, 512Mb and MSI NVIDIA Gforce 4, DirectX 9 and Mediaplayer 9. Does anyone have any suggestions? Many thanks in advance! Ewout Tag: newbie - video capture Tag: 12754
  - 16
    - Analog Analog Analog Ok, let me rephrase my question? I have an ANALOG VCR. I have a computer. I have WindowsXP Home. I have Windows MovieMaker 2.0. Is there anyone out there who captures video from an Analog VCR, edits the captured content using MovieMaker 2.0, and makes a VHS tape of the edited content? How are you accomplishing this? Analog VCR tape --> Computer --> edit with MM2 --> Analog VCR tape I do not have a DVD burner on my computer. I do not have a DVD player that is compatible with VCD. I do not have a DV camcorder. I do not want to spend any more money on this than I must! Tag: newbie - video capture Tag: 12753
  - 17
    - Poor performance Last week I did something to make my original movie maker player disappear. now it is replaced with the movie maker 2 which does not deliver half the quality. How can i retrieve the original movie maker for windows XP 2001 please donal.quilton@btopenworld.com Tag: newbie - video capture Tag: 12751
  - 18
    - VCR to DV Camera to WMM problems I'm trying to capture video from a VCR. When I play the VCR tape through my Sony TRV 22 I can see it in WMM, but when I click "Capture" the DV tape in the Sony starts to play and all I do is capture off the DV tape. Not what is on the VCR tape. Is it possible to capture straight from the VCR to WMM without first having to record onto a DV tape? I am using firewire. Thanks, Chuck Tag: newbie - video capture Tag: 12749
  - 19
    - poor quality Hi guys. I just tried to edit my home video I made on my DV JVC. When I put back my editing version to DV and play it on TV I noticed the significant downgrade of the picture quality. Is it what usually happen after transfering movie from DV to PC and back to DV or am I doing something wrong? Tag: newbie - video capture Tag: 12745
  - 20
    - movie maker for 98SE is there a version of movie maker for windows 98SE Tag: newbie - video capture Tag: 12741
  - 21
    - video captureing i have a samsung mini dv camara and i only have audio settings. I use a usb wire. I have no idea what the problem is its really makin me mad. Its a scd23/d24 samsung. I really need help.. Tag: newbie - video capture Tag: 12738
  - 22
    - my movie is 191 minutes long Unable to burn the entire movie to DVD. It seems only to burn about 30 minutes. I am using HP DVD+rw with 4.7 GB/ Do I need to compress it somehow for DVD viewing on my TV?? Tag: newbie - video capture Tag: 12736
  - 23
    - Sending to VHS I've created my movie, now how do i transfer it to VHS tape? Tag: newbie - video capture Tag: 12735
  - 24
    - Word-wrap in these posts I love this newsgroup except for scrolling across to read some of these posts that just go sideways and sideways for ever. (I don't have a 48" monitor). Why don't some of them word-wrap? Does it result from the way in which they were input? Can I do anything about it when reading them? T H A N K S Tag: newbie - video capture Tag: 12734
  - 25
    - Sound When I make a project the sound is like "Donald Duck". The sound in the clipp is correct. I have two older project without problem. I have done an update. Tag: newbie - video capture Tag: 12721

Trying to capture video in movie maker, when i go to record, audio device option available, video option grayed out. I looked in device manager and have Legacy Video Capture Device ? What am I missing or doing wrong. Thanks

Top