Saving a movie then pub. to Web using FrontPage 2000
I'd like to have the smallest movie file size with the
best quality. Then I need to save the movie file to my
hard drive and publish it on the Web using FrontPage 2000.
Can anyone help? Tag: i need to delete this??? Tag: 10900
Program crashes with transitions
The moment I try to add a transition, an effect or a title the program crashes. All I can do is combine videos and or pics. Can anyone help me? I do have quite a bit of memory, so that can't be the reason, or is it? Tag: i need to delete this??? Tag: 10897
Reverse in MM2
I've got a 5 sec clip from my DV cam and want todrag it into the timeline,
but I then want to drag the same clip in one again, but this time play the
clip in reverse. Has anyone out there got a clue on how I can get around
this in MM2?
Your help would be appreciated.
Qoensal Tag: i need to delete this??? Tag: 10895
Nik vs. Bob vs. WMM2
I'm with Nik on this one. ....
WMM2 is BY FAR the buggiest program I have every used on my computer. I won't bore you with my computer specs. but suffice to say that it MORE than meets the minimum requirements.
I have over a hundred hours in a project I'm working on. It would have been about 40 hrs. if the freakin' program had not crashed a bazillion times. I finally got it completed and now I can't save it. I've tried saving it to my computer and my DV camera with no luck. Once again, the program crashes constantly.
Bob....I'm sure Nik is aware that the .MSMM file is a project file but the project file isn't worth squat if you can't save it. I have tried (as I'm sure Nick did) to import the .MSMM file within another program like Studio so I can bypass this living abortion they call WMM2.
If you can't already tell, I'm pissed. Shame on MS for releasing crap like this. I'm sure some of you have had success with this program but I'd be willing to bet they are short videos with little if any effects. BTW.....I've heard that there may be issues with nVidia video cards? Are you freakin' kidding me? nVidia is the largest producer of video cards. What's up with that?
The bottom line is that WMM2 has taken a project that should have been to make and turned it into a nightmare. Tag: i need to delete this??? Tag: 10894
What am I doing wrong?
I've posted this 3 times, and no one is responding. Please, someone, help me!!
I have tried several permutations to get my vcd's and c-dvd's to play on computers other than the computer that created them. I have MM2 and created a fabulous movie which I saved in dv-avi. Then I used Roxio to record them in the various formats
I now have 10 cds, and none of them can be opened on all computers, just a couple on this computer, and a couple on that computer..
I then tried to capture the video directly into Roxio and burn from there, but again, there are no reliable results. I thought creating the video in Roxio would make it more compatible with Roxio's encoding process, but so far, it doesn't seem to be any better than creating the movie in MM2 and saving as dv-avi & importing it into Roxio. Am I missing a step in Roxio
So far, the best and most universal disc I have been able to do is to create a VCD (via mm2 to roxio) which requires the users to open their windows media player (or quicktime for mac users), and then, from within the player, manually open one of the 5 files which will appear. Then the video opens.
I am using these cd's to promote my business and I am worried that a potential customer will not go to all of the trouble to open these cd's
The only good side to this last cd is that I tried it on 4 computers and the "manual" way worked on all of them
Is there a better way? Should I just include instructions for opening my cd's when I send them
Thank you in advance for your help Tag: i need to delete this??? Tag: 10886
Creating a slideshow on mover maker using digital camera stills
Hi Guy
I'm trying to make a slideshow of my sister-in-laws wedding using stills, crossfade and adding music. Its all going really well apart from the quality. People's faces are sometimes distorted & blurred. However, the original prints taken on a Konica Digital Revio KD310Z are perfect. The size used to take them was 1200x1600. I have added them on to 'collections' by the import method. On saving my movie slideshow, I have tried saving it on low quality, medium, high and email. High is the best but still not brilliant. It even distorts slightly in my movie maker monitor and then distorts worse when I watch it through my windows media player
Can anyone offer any advice, I have searched the help on Windows Movie Maker and on the on-line pages but I can't find an answer
Thank
Maria
(England) Tag: i need to delete this??? Tag: 10884
Copied movie won't play on my DVD home player
I have successfuly captured my digital video and burned to my DVD burner. It will play on my computer but won't play on the DVD player I have attached to my TV? Help Tag: i need to delete this??? Tag: 10881
.mov files
How do I change a .mov file into a format that moviemaker 2 would regonize. My Kodak Digital Camera records movies in .mov files but MovieMaker 2 can't use them because it can't regonize them as a compatable video format
I tried some freeware converters but it watermarks the movie and wrecks the thing so can you help me. Tag: i need to delete this??? Tag: 10879
1394 drivers
Can't dv capture to work. Have Panasonic DV, device found,
capture starts then system hangs. Have XP with SP1, quite
frustrated by it all. anyone go ideas? Tag: i need to delete this??? Tag: 10878
How to adjust project audio volume?
New MM2 user. Source audio somewhat low. I can adjust the
volume of ONE clip at a time. Is there a way to either
select all of the clips and adjust the audio level on all
at once, or is there a way to adjust the entire project's
audio? It seems counterproductive to have to combine all
the clips to be able to adjust the audio level and then
split them apart to build the project. I guess I could
capture the work as one clip, adjust the audio and save the
project, then capture it again to build many clips. Time
consuming but possible. Is there an easier way?
Jay O'Brien Tag: i need to delete this??? Tag: 10875
Where is MM1
I believe that MM1 is installed as part of XP but I can
not find it. My Dell 4100 originaly came with ME
installe and I installed XP over it 2 months later (as
soon as it was available). MM1 is not installed nor can
I find any files that look like they may be part of MM1.
I have tried to reinstall from the CD but there is no
option for MM1. How do I get it? Tag: i need to delete this??? Tag: 10871
How many audio tracks do you get with MM2?
How many audio tracks do you get with MM2? 2 or 3? I heard somewhere it was only two. Tag: i need to delete this??? Tag: 10870
video capture
can't capture video with windows xp home from sony trv-11 digital camcorder ("device not detected"). What is goinig on? Tag: i need to delete this??? Tag: 10869
A quick question
Downloaded WMM2 last night and made a few quick movies with it. What
a great program! Can't wait to spend some quality time with it.
I was wondering however if it is possible to make a Video CD (VCD) out
of the movies that I have made. I usually use Nero burning to do it,
but it doesn't recognize WMVs. Is there another program i should look
at for this? If i use the "burn to CD" function would that make a
VCD?
Thanks in Advance
Tom Tag: i need to delete this??? Tag: 10867
VCR capture problems with windows movie maker 2
I have my VCR connected to a happauge II tv tuner/video
capture card through an s-video cable and rca l/r cables
for sound. Windows Movie Maker 2 recognizes the capture
card but does not allow me to select the options I need
in order to capture the video from my VCR. Any
Suggestions? Tag: i need to delete this??? Tag: 10866
DV capture problem
Hi, I just insstalled now movie maker 2, capture from JVC
Gr-DVX4 is not possible while it was possible with older
version. Control buttons works but screen is black,
nothing captured in the file..
Does anyone know why?
Thanks
sozkul Tag: i need to delete this??? Tag: 10865
Convert Video To audio?
Hi, I was wondering if someone could explain step by step
how to convery a video to audio format using Movie Maker.
I know it is possible but i cannot find good directions.
Thank you. Tag: i need to delete this??? Tag: 10864
Convert Video To audio?
Hi, I was wondering if someone could explain step by step
how to convery a video to audio format using Movie Maker.
I know it is possible but i cannot find good directions.
Thank you. Tag: i need to delete this??? Tag: 10863
Creating clips launches Active Movie ?
I can no longer create clips when importing movies, I have the check box for create clips checked. The mpeg2 file imports as one file. When I right click to create clip a old MS product called active movie launches. What gives? Tag: i need to delete this??? Tag: 10859
thanks to ahhnold and priint_maker
Thanks for your comment on my problem. Maybe part of my problem is that I made the slideshow in Photo story with lots of zooms and pans, so there actually is lots of movement. Still seems a shame.
I donâ??t currently have a DVD burner, but would that solve my problems of poor quality?
Could I still create the movie from slideshow in photostory and WMM and then burn it straight to a DVD? Do you burn an avi file to a DVD or would I have to convert it to MPEG first? Iâ??m new at this and need help obviously.
I canâ??t stand that I put hours and hours to create this 20 minute movie (which we love), but canâ??t burn it to watch on the DVD player satisfactonily, you know? Thanks for any advice. Ladybu Tag: i need to delete this??? Tag: 10858
update download
An electrician tuned off the mains causing me to have restore my pc. When I tried to download the update for MM2 it do'es not seemed to have worked I have no transition ets. Any clues? PLEASE Tag: i need to delete this??? Tag: 10854
Sound skips, glitches, bleeps, during transistions after being saved to dv
I had a problem with my sound skipping during transistions
into a video clip. I noticed that it only did it on the
clips that did not have some sort of Video Effect added.
I added an 'Ease In' and/or 'Brightness Increase' (or
combinations of others) and the problem went away. I
don't know why this fixed it, but it did. Tag: i need to delete this??? Tag: 10853
Pappa John?
I see a ton of messages referring to Papa John and his
web site. Can some one point me to his resources?
TIA Tag: i need to delete this??? Tag: 10850
Freeware for converting WMVs
I have converted my analog camcorder home movies to 640X480 WMV files. I
wish to burn them to a CD so my mother can watch them on her home DVD
player.
1) What is the best format to convert them to? AVI or MPEG1 or MPEG2 or
what?
2) What is VCD? Is that just MPEG burned to a CD or what?
3) Is there a good freeware program for converting WMVs to one of these
other formats?
Thanks Tag: i need to delete this??? Tag: 10849
TV- out settings
In my computer documentation the default TV-out setting
is shown as for PAL transmission. Is there some way of
checking on my computer, (Settings??), that this is
actually the case? Not able to view in colour on my TV
and wondered if it was anything to do with this. Thanks
in advance for any help. Tag: i need to delete this??? Tag: 10848
recording form DV device bad quality
i have porblem when I record from my dv camera with
firewire to moviemaker, it looks like moviemaker misses
frames some time.
I do record it on higest resulution and framerate.
annyone have the same? and how to solve promblem?
I do have a fast PC so that shall not be the problem.
thanks for anny help. Tag: i need to delete this??? Tag: 10847
Move Maker
Hi
Is the software Windows Move Maker a standard part of Windows XP or do I have do buy or download it some where ?
Thx Tag: i need to delete this??? Tag: 10844
movie maker 2
hello,
please how do I import music into my slide show,when I
select music from my media player it says wma is
protected,cannot be imported,I can narrate my slide
show,but would like backgound music.
Peter. Tag: i need to delete this??? Tag: 10841
help
I'm trying to edit a home movie.I've been successful in capturing from a analog camera.Yesterday I brought all the clips on the story line and then started to trim parts that I do not need. I saved and so far so good. When I opned the project today, all the clips are compressed and I cannot seem to be able to start the set trim set point and end trim point. Also the sound is very bad. Is there anyting I can do to improve it? Tag: i need to delete this??? Tag: 10835
Buggy Microsoft code!!!
I looked in here to get some help for (a) problem(s) I'm
having with windows Movie Maker, I can't in any way
convert this stupid ".MSWMM" file format to anything:
Mpeg, Avi, CD, DVD, anything! The WMM save wizard either
crashes my system or asks me to wait 35million minutes
until my file is done. I've got a brand new computer with
a 2.6 gig processor, and a huge hard drive, loaded with
video stuff, it should work fine, but it doesn't. I don't
have 91 years to wait for a slideshow of baby pictures.
But then I see all these requests for help from others
with no response from anyone, let alone microsoft.
One would figure if they continue to flood the market with
these buggy programs, they's have some kind of accessible
tech support, especially for us PAYING CUSTOMERS! They
should have their expert coders regularly check these
newsgroups and forums and offer help to their perplexed
and frustrated customers. Tag: i need to delete this??? Tag: 10834
Please help me
I have tried several permutations to get my vcd's and c-dvd's to play on computers other than the computer that created them. I have MM2 and created a fabulous movie which I saved in dv-avi. Then I used Roxio to record them in the various formats.
I now have 10 cds, and none of them can be opened on all computers, just a couple on this computer, and a couple on that computer...
I then tried to capture the video directly into Roxio and burn from there, but again, there are no reliable results. I thought creating the video in Roxio would make it more compatible with Roxio's encoding process, but so far, it doesn't seem to be any better than creating the movie in MM2 and saving as dv-avi & importing it into Roxio. Am I missing a step in Roxio?
So far, the best and most universal disc I have been able to do is to create a VCD (via mm2 to roxio) which requires the users to open their windows media player (or quicktime for mac users), and then, from within the player, manually open one of the 5 files which will appear. Then the video opens.
I am using these cd's to promote my business and I am worried that a potential customer will not go to all of the trouble to open these cd's.
The only good side to this last cd is that I tried it on 4 computers and the "manual" way worked on all of them.
Is there a better way? Should I just include instructions for opening my cd's when I send them?
Thank you in advance for your help. Tag: i need to delete this??? Tag: 10833
Royalty free music
Is anyone using a music creation software. I am looking
for coments on a loop base program that is easy to use.
Thanks Tag: i need to delete this??? Tag: 10832
text and announcing
1) Can the full screen option be used while announcing a hockey game?
2) Is there a way to move text around the screen manually such as posting the score in the upper right hand corner? Tag: i need to delete this??? Tag: 10831
Effects
Whenever I use anykind of video effect, whether its a transition, effect or title, Windows Movie Player completely closes without any warning window or anything. It's just gone from the screen including the task bar. This didn't use to be the case and it been a while since I've used it so I suppose it could be any number of things. Tag: i need to delete this??? Tag: 10825
WMM version 1
I was using version 1 and imported some video files
from 'Click on dvd' (.vob file extension).
When I got an error and sent the report to Microsoft,
they suggested upgrading to version 2 - which I did.
Now, using version 2, I can no longer import the .vob
files.
How can I go back to version 1?
Is there any other software that can read a .vob file,
other than 'click on dvd'? Tag: i need to delete this??? Tag: 10824
converting avi files and other problems
Hello - I used WMM to create some clips (small slideshows created on Plus! Story software) and must be doing this the hard way. It's in fine quality on WMM, but then I save it to an avi file, then import it into Dazzle Movie Star to burn to a VCD so need to convert the avi to mpeg. By the time all this is done, I do get a VCD but the quality has really suffered. What am I doing wrong???????????Thanks. Tag: i need to delete this??? Tag: 10822
copy-guard
After I edit a movie in Movie Maker I try to burn it to a
DVD, but it won't let me because I keep getting an error
message saying I am dubbing a video containing a copy-
guard. How do I get rid of the copy-guard. Tag: i need to delete this??? Tag: 10818
Crashes when saving to DV-AVI
Papajohn and others
I have a 15 minute slide show created in MM2 complete with titles, transitions, effects and audio. When I go to save it as a DV-AVI file, after saying it is about 12 percent complete (approximately 10 after starting to save) I get an error message saying that the program must close. I have noticed that the time remaining increases all the while the file is being saved (upwards of 30 minutes) instead of decreasing. I have an HP computer with a Pentium 4 and a very large hard drive. Please advise on how I can get past this and what should be the normal time for my computer to save this size file
Thanks
Pete Tag: i need to delete this??? Tag: 10817
PapaJohn! I found a fix to some Capture Problems!
I have posted before and read postings by others unable to
capture video from their DV camcorder through their IEEE
1394 port. Well, I finally fixed my problem and I thought
that I would be nice and share with everyone else that had
similar problems to mine:
My System:
Pentium 4
Windows XP Pro
Motherboard (built-in) IEEE 1394
DirectX 9.0b
My Problem:
Windows would recognize my Camcorder (Sony DCR-TRV27) when
plugged in via IEEE 1394, but every time I tried to
capture, I got the error:
"An Unknown Error Has Occurred" (Please check video device
to see that it is not being used by another device ....
etc.)
I WAS able to play, rewind, etc. from the computer
(transport controls), but no video capture.
My Fix:
In desperation, I downloaded the Trial Version of Adobe
Premiere. After installation, Premiere was able to
capture video fine. I went back and tried Movie Maker 2,
and it TOO was able to capture fine at this point.
The Reason?:
I know that Premiere re-installed DirectX 9.0b when I
installed Premiere. My guess is that there was some sort
of driver conflict that was worked out with this
installation. Anyway, I'm a much happier person now that
my firewire connection works with my system. So far, no
missed frames, good audio.
I hope this helps people who have had similar problems.
Scott Tag: i need to delete this??? Tag: 10816
The downloaded Moviemaker doesn't give me the update
Even after trying for several times, I simply can't get
the up-dated moviemaker running. When checking
with "About" it's still the version 1.1
Any possibility to just start all over? Tag: i need to delete this??? Tag: 10814
Help please
I am trying to save a home movie I have captured and
created using MovieMaker2 from my camcorder, but it won't
let me save it or burn it onto cd. It won't let me choose
a format to save it with, and just keeps saying there is
an error in trying to save it.
If anyone can help, please email me.
Thanking you in advance.
LR Tag: i need to delete this??? Tag: 10813
movie files on cd lost
there was definately 3 wmv files on my cd. I added another
(movie maker said it was successful), but now when I open
that cd there is only one of the original three files on
it and the one I just tried to burn isn't there. What
happened to them? Tag: i need to delete this??? Tag: 10810
capture
when I try to capture from my panasonic video camera...A message comes up saying the device is in use in other applications?So what do I do Tag: i need to delete this??? Tag: 10808
Movies stored on CDR = Play on DVD Player??
Sorry if this is a dumb question but I have lots of
movies saved onto CDR's which I have been viewing on my
computer monitor screen. Will they play on a separate
DVD Player attached to my Digital TV. I have tried using
the TV out facility to connect my computer and my TV but
can only get a black and white picture. Any help would
be much appreciated. Many thanks. Tag: i need to delete this??? Tag: 10807
2 clips at once.
Is there any way to play two clips on top of each other. Kind of like the effect you get in the middle of a fade transition. I want to be able to see a second clip in the background of the main clip. If you know of a way to do this then please email me. masterkaysi@earthlink.net Tag: i need to delete this??? Tag: 10805
Cannot capture neither create movies anymore
Hi everyone. Just suddenly, I cannot capture video anymore from my Panasonic camcorder neither create a movie after having edited it. The hardware link is fine because I did a video test capture with VideStudio and it worked ok.
For the first problem I'm getting "Capturing profiles cannot be found" and for the latter, on the Save Movie Wizard, "No LOC needed - Autolayout placeholder string".
And when I try to save the movie (to the PC), the screen is overlayed with text from other options... And it goes to an endless loop where I'm getting (randomly) 30611855 more or less minutes to create a 13 minutes movie!!!
I've re-installed MM2, re-booted the PC and re-launched MM but with same results as before.
Earlier, I received a Windows XP error message that a "mscoree.dll" was missing (which I've managed to download and re-install back).
Thx for your help if someone has an idea how to solve this mistery.
Enrique Tag: i need to delete this??? Tag: 10802
every time i start wmm2, it says windows mm has
encountered a problem and must close... so i want to
delete the program and reinstall...
See the Problem Solving > Acceleration and Codecs page of www.papajohn.org
---
PapaJohn
"trae" <anonymous@discussions.microsoft.com> wrote in message
news:34ac01c3e2df$2c670800$a101280a@phx.gbl...
> every time i start wmm2, it says windows mm has
> encountered a problem and must close... so i want to
> delete the program and reinstall...
>
> it feels impossible.
>
> help!