just stopped playing back

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Help. I have audio but no video When I try to preview my movie, I have audio but I have no video. I can't seem to correct the problem. What am I doing wrong? Tag: just stopped playing back Tag: 29115
  - 2
    - Video Transitions,effects. Hi. I have used Movie Maker 2.o before and have had 0 problems. Now, I'm still using 2.0 and am trying to add video transitions& effects but each time I drop them to the storyline the program ends immediately. I have plenty of space on my hard drive and my virtual memory is a bit low, but shouldn't affect that as such. Do I need to expand my paging file so I have more virtual memory? or should I reinstall windows xp again? I have service pack 1. The last time I tried to update to service pack 2 windows xp, my computer didn't run efficiently. Any help would be much appreciated! Tag: just stopped playing back Tag: 29109
  - 3
    - My vid doesn't save on my computer Hey! I have a vid of 19 mb and sometimes vids that are less, but somehow MM wants to put it on a disk instead of my computer and I want it on my computer, been struggling with it for weeks*sig* Annika Tag: just stopped playing back Tag: 29102
  - 4
    - why is my video footage sped up? i'm trying to create a movie, but not only is the video footage recording at a much faster rate, but the audio is totally out of synch with the footage. this is driving me insane, any ideas? Tag: just stopped playing back Tag: 29089
  - 5
    - Bad picture qualtiy hey i need help! I am using my SONY Handcam Hi8 to put it om my computer using my beklin usb 2.0 dvd creator. i connected the compostive connecter to the usb and my sound card. but when i preview it the video is chooppy and you can see all these lines and also looks like the picture is all in squares. also colour is bad. can anyone please help!!! if not do you think i should buy a fireware or capture card?? are ther exspensive?? thanks in advance! Tag: just stopped playing back Tag: 29088
  - 6
    - Can't burn to CD I see someone else has the exactly the same problem as me (computerilliterate an 21st Dec), so at least it is not a one off. When I try to burn a movie to CD it says it is preparing the movie, gets to 58%, and will go no further. I have to cancel, at which point I get a message that it has not finished saving the movie and am I sure? Any suggestions? I am using XP Home SP2. Or how about a work round? I thought of saving the movie to my hard drive then copying it to CD. However, when saving to the computer you don't get the option of saving in a CD format, Thanks Gary Sams Tag: just stopped playing back Tag: 29086
  - 7
    - Movie Maker Hello, my name is Jhonas Cruz Reyes, and I have a problem=20 with Windows Movie Maker.=20 The Program it=B4s not compatible with my DVD=B4s Recorder=20 (model LG GSA-4082B)because not saved my video projects.=20 Please,have a Update for my recorder, I made very happy ^^ ^^ Tag: just stopped playing back Tag: 29082
  - 8
    - I can not save a movie I can save a project but I can not save a move for nothing . I have the disk space . I have all the files . I can import a project . I can save a project but I can not save the project as a movie . Help Please Tag: just stopped playing back Tag: 29080
  - 9
    - Some Clips removed now title appears at wrong clip Hi! My First Video with Moviemaker is nearly finished. I have a lot of clips with titles. Now, if i remove one of the clips then the titles are still on the same position in the timeline, so they are appearing at the wrong clip. I didn´t find a way to correct this, can you give me a hint please? thank you tom Tag: just stopped playing back Tag: 29077
  - 10
    - Won't playback after inserting a clip I created a title with an effect, but once I add a clip that I imported in through my Dazzle 150 I can no longer playback or edit the movie. I tried reduce acceleration and that did not work. Suggestions? Tag: just stopped playing back Tag: 29071
  - 11
    - Wheres the Color in preview? I recently put a TV card in with a Cable connection into my PC. I hooked up a VCR to convert the video. If I use the software that came with the Card I get color. If I use WMM2 the File comes out as Black and white. I Have been looking in the Forums and tweaking but the result does not change. I also have no understanding of anything related to Video Processing but I am technical so please talk to me like I'm 5 years old. Thanks Tag: just stopped playing back Tag: 29067
  - 12
    - Black & White Capture I have connected my Sony DCR-TRV350 using s-video cables that go through the ATI TV Wonder Pro Video Adapter. The adapter is an s-video/composite video adapter however when I try to capture my video from the tape, it appears in black and white. Anyone encounter this before and possibly have a solution? Thanks, Loretz Tag: just stopped playing back Tag: 29066
  - 13
    - Unspecified Error Whenever I try to open Movie maker, it always tells me that there's an "unspecified error" and won't let me enter the program. Can anybody help me with this problem? Tag: just stopped playing back Tag: 29065
  - 14
    - cannot import anything into mm2 New computer Windows XP Media Center - Get this error message when trying to import photos or videos into Movie Maker 2: C:\Documents and Settings\john\Desktop\e2p1.jpg could not be imported. Unspecified error When I close Movie Maker and reopen it, Pictures show in collection pane, but cannot insert in storyline. Tag: just stopped playing back Tag: 29064
  - 15
    - No Audio from Video in Timeline Preview I've made a couple of short videos with MM, and I've never had any problems. The other day, I started a new project, and placed a few clips in the timeline. When I previewed it, all of sudden, there was no audio. When I highlight the clip in the folder, and hit play on the preview screen, there is audio, but when I highlight the timeline and hit play, it doesn't play the audio. Also, at the same time, I have no system sounds for my computer. I've checked all of the drivers and audio settings and everything seems fine. I have audio in all other applications except MM and no system sounds (such as asterisk, alert, etc. .) What the heck happened? Thanks, Russ Tag: just stopped playing back Tag: 29062
  - 16
    - OT: soundtrak suggestions please Hi everyone, I could use some suggestions from fellow users. I'm putting together a slide show of my son's first year to give to my parents and in-laws for Christmas. He was born 12/30/2003, and I have some great pictures and video to use. My problem is I'm having a hard time thinking of a good song to put along with my pictures. I've got Louis Armstrong's "Wonderful World", but that's just a little over 2 minutes long, so I need another song (or two) to fill out my aproximately six minutes of pictures and video. I thought about using a few songs from the Baby Einstein soundtrak, but those don't really go well with Wonderful World (and I really want to use that one since a number of the beginning pictures are in the delivery room right after he was born and when we first brought him home). Would love to hear a few suggestions from some of the creative folks here! Thanks, Gary There are 10 types of people in the world: Those that understand binary, and those that don't. Tag: just stopped playing back Tag: 29061
  - 17
    - Analog capture in Full NTSC I'm trying to capture footage from VHS and I want to get the best possible rez so I change the video settings to 720x480 but when I try to capture I get an error which says "the video device is currently in use. Close any other applications.....". I'm using a PCI tuner card w/ composite input and I've checked all the settings. I am able to make it work w/ the settings @ 640 x480 bit rate 2.1 but I was hoping to get bigger. Tag: just stopped playing back Tag: 29060
  - 18
    - XP-SP2 Firewire Speedup Microsoft just posted an update to XP-SP2 to correct a speed setting for Firewire captures. Seems the original SP2 install capped the download speed a S100 instead of permitting the S400 speeds that video capture prefers. Details and the download are found here in KB885222: <quote> After you install Windows XP Service Pack 2, some 1394 devices (such as digital cameras that use S400 speed) may not perform as expected. Install this update to help prevent this issue. After you install this update, you will have to restart your computer. http://www.microsoft.com/downloads/details.aspx?FamilyID=5c076e4c-aec8- 434d-9849-e668a50e6e81&DisplayLang=en <end quote> I noticed a significant capture improvement with this patch. mikkl Tag: just stopped playing back Tag: 29049
  - 19
    - Crash on adding Music Just loaded SP2............trying to add a cut down Mp3 as back ground music and as soon as I the track Movie maker crashes. any help would be greatly appreciated Tag: just stopped playing back Tag: 29048
  - 20
    - Capture PC screen as video My problem: I have created a 3D-animation that I would like to capture into a video format, e.g., avi or mpeg-2. The reason is that I want people with relatively low performance graphic cards to be able to watch it. Can I use Windows Movie Maker for this purpose? Thanks Tag: just stopped playing back Tag: 29047
  - 21
    - Capture Device Not Detected (analog) (Sony Vaio) (I'M DESPERATE!!) Hello, I just bought a Sony Vaio VGC-RA826G: Media Center 2005 ATI Radeon X600 XT 256 MB video memory TV-out/VGA out/DVI-out 16x PCI express Giga Pocket MPEG2 realtime encoder/decoder board with TV tuner When I run Movie Maker I get the error: Capture Device Not Detected I know my device (VHS) is connected properly, as I am able to see my video in Sony's "Click to DVD" software, as well as in media center. the problem with those two applications is that neither allow me to save my files to my hard drive as mpegs for example. Why doesn't movie maker detect my device???? please help!! thank you! Tag: just stopped playing back Tag: 29045
  - 22
    - importing audio How do you turn off the digital rights option in musicmatch? I need help fast. Tag: just stopped playing back Tag: 29041
  - 23
    - Help! I can't save my movie! I've been working on this christmas gift slide show-like movie and when I go to save it to a cd it says I should check the space in the cd, make sure all my sources are there, and see if there's a big enough file to keep it in. I know my movie can fit in the cd and I've tried everything I know to "check my source files." I really need to get this movie burned before Christmas-can anybody help me?? I did use a lot of scanned pictures..if that's of any use. Thanks Tag: just stopped playing back Tag: 29039
  - 24
    - Runtime Error? Whenever I try to export my movie from the computer to my camera, it stops after 28%. Whenever I try to save it as a movie file, it stops after about 57%. Then when I go to clikc out, an error pops up, saying something about a runtime error. What's going on here and what can I do? Tag: just stopped playing back Tag: 29037
  - 25
    - WrongColorsInVideoPlayback Hi, I've used MM 2 successfully on a few home projects. Recently, I've run into problems with video playback/review. The color quality is overblown with green and yellow hues. I'm not sure, but this color change may have occurred about the time I installed multiple softwares for HP photosmart photo printer, MGI photosuite 4 for a vivitar digital camera, and nero software for dvd 6in1 player. Any ideas? ? I tried Tools > Options > Compatibility > Restore All Defaults in MM to no avail. -- RF3 Tag: just stopped playing back Tag: 29031
- Next
  - 1
    - rotate clip? HI Can I flip or rotate a clip. I used my digital camara to make a movie but I put it on its side... I thought that I could always rotate it. Can I or how can I? Plz help. Any suggestions would be greatly appreciated. Thanks Jackie Tag: just stopped playing back Tag: 29029
  - 2
    - Video Lost in conversion I just saved a project to my pc as a movie. the movie is 64 minutes long. At the 15 minute mark or so, I loose video. I turned of filters to see if that helped, but I have tried 4 times so far with the same results each time. This is the first time I have used WMM since the 2.1 upgrade. Havn't had this conflict before the install. Any thoughts on how it happens? Tag: just stopped playing back Tag: 29025
  - 3
    - DVD I have just got windows xp media center and I have no idea how to burn a DVD to a DVD. I have the DVD reader and writer/ burner. I'm finding burning a CD to the media library and then to a CD fine...but there are no DVD options...help! Tag: just stopped playing back Tag: 29023
  - 4
    - Transition arrangement Is there a way to group transitions in MM2 other than alphabetically, perhaps by the most commonly used? This will eliminate the scrolling through all transitions. Tag: just stopped playing back Tag: 29022
  - 5
    - Saving Movies With Move Maker Greetings- Would anyone be able to tell me why when I follow the steps to save a finished movie that I created from clips made with my webcam and I attemp to playback the CD-R in my Windows Media Player 9, it only shows the title captioning that I created and only plays the sound? Am I missing a codec or something?, it seems that it only plays back correctly from the CD-R when I open it with the Movie Maker, -I am using Windows XP SP2. All The Best! Elaine Tag: just stopped playing back Tag: 29021
  - 6
    - JVC GR-D53ek My JVC GR-D53ek camcorder keeps on informing that I should clean the heads even after I have cleaned them. Is anyone else having this problem ? Sorry if this is the wrong group for this problem. Tom..... Tag: just stopped playing back Tag: 29012
  - 7
    - importing video...need help I have a sony camcorder, but it has neither a USB or Firewire output. The camera does have output in the form of an S-Video, and audio jack (which leads to RCA cable ends.) SO, what is the best way for me to import video to my laptop? FYI: I only see a USB port on the computer. I assume I'll have to buy some sort of converter. Thanks for the help. Tag: just stopped playing back Tag: 29011
  - 8
    - Web Hosting? Can somebody tell me if I can export a Windows Movie Maker file to a web site so that others can see it? If you know of a web hosting site that offers this service, I'd appreciate knowing. Thanks Tag: just stopped playing back Tag: 29003
  - 9
    - Deleting Title on a clip I put a title on a clip and would like to remove it but cannot figure out how to do it. If I delete the picture (clip) it just goes onto the next clip. Help! There must be a way to edit a title out. Tag: just stopped playing back Tag: 29000
  - 10
    - Capturing Widescreen Format Hi, am using Windows MM for the first time, attempting to capture video from my Sony DV which I recorded in widescreen 16:9 format. I cannot see how to get MM to recognise this, it's stretching all my video into 4:3 (I think!) and everything looks awful. Can anyone advise? My main goal at this point is to capture some still images from the video. I later want to write the video to DVD in widescreen format. Would I be better off using another package? Thanks in advance for any advice. Tag: just stopped playing back Tag: 28999
  - 11
    - Recording Movie back to camera I have a Panasonic mini DV camera. We have created our movie in movie maker with all the bells and whistles and we are unable to record it back to the camera to then transfer it to VHS. Can someone please help? I have tried several things. Like converting the movie to Mpeg, and all that stuff but the movie comes up not recored. It looks like it is going through the recording process bit nothing happens. Any help would be greatly appreciated. Thanks in advance. Tag: just stopped playing back Tag: 28994
  - 12
    - what settings to get best quaility dvd I have been trying to down load a video to edit and then send it to sonic to make a dvd. I am having a problem with the video quality when I am burning the dvd. What settings should I use to download and what settings should I use when saving my moviemaker project to get the best quality? Tag: just stopped playing back Tag: 28991
  - 13
    - what settings to get best quaility dvd I have been trying to down load a video to edit and then send it to sonic to make a dvd. I am having a problem with the video quality when I am burning the dvd. What settings should I use to download and what settings should I use when saving my moviemaker project to get the best quality? Tag: just stopped playing back Tag: 28990
  - 14
    - Need Simple Help on Transitions/Titles I enjoy MM2, but have trouble remembering how to add textual messages to the video itself or as transitions from one clip to another. For example, before a clip on a beach video, I might want to have text giving the location and date and ages of kids, as well as any other notes. Or during video, have text superimposed on screen with commentary. Thanks! Tag: just stopped playing back Tag: 28982
  - 15
    - Papajohns website Help am I doing something wrong? Icant www.papajohn.orf is that right wording Tag: just stopped playing back Tag: 28978
  - 16
    - Transitions Ok I am getting a error message. And there is no area were it should be for transitions.Adding music text etc.Says all my file are corrupted. How do I un-Install and Re-install Movie Maker.I also Have the plus unpgrade I downloaded for the second time from the internet.Does Microsoft have a phone number I can call for tech help with this problem.Please wbs Christmas is comming soon. Respectfully Greg Hall -- Gregory A. Hall Tag: just stopped playing back Tag: 28975
  - 17
    - Difficulty in rendering transitions - Q to Papa John I produced a 15 minute ski movie with plenty of short action clips and many transitions (including some of MM2 winter transitions) and movie maker 2 refuses to render this to DV AVI (but will to WMV9 - highest quality PAL). If I take out all the transitions it renders quickly to DV AVI but obviously screws up the look and feel of the movie without the transitions. I also get the occasional skip in the music backing track which I see described elswhere as being attributable to MP3 files when rendering directly to Dv AVI. I see a solution for music problem is to render to WMV then drop that back in as a single clip to MM2 and render again to DV AVI which works first go for the music. My question is ---- isnt this killing the quality of my video? ie first to WMV and then to AVI? by the way I have a recent high spec machine with 1 gig of ram and separate 120gb hard disk only for movies and am at a loss to understand the transitions rendering issue. Also your site is great...it saved me hours of frustration. Tim Tag: just stopped playing back Tag: 28970
  - 18
    - WMV to AVI What is the best program to convert WVM to AVI. Thank you Larry Tag: just stopped playing back Tag: 28961
  - 19
    - Windows Movie Maker Profile 10 I am trying to duplicate Profile 10 which is Video for broadband (340 Kbps), but I want to change the size to 240x180 and load the profile in a batch file for Windows Media Encoder. What Key frame interval is used by Movie Maker? What buffer size is used? What Video smoothness is used? Anyone know the exact Profile 10 settings? Any help would greatly be appreciated. Tag: just stopped playing back Tag: 28959
  - 20
    - Subtitles Hi, I want to create subtitles for my movie. The problem is, the "subtitles" style when adding text to video doesnt let you change the background. Is there any way I can get around this? I need to be able to change the background colour. Or does anyone know of any other addins I can get? If not, then I'll be forced to use some other forecolor such as Red, which isnt really appropriate for subtitles. Any response gratefully appreciated. Andy Tag: just stopped playing back Tag: 28957
  - 21
    - Runtime Error R6025 Running XP Pro, MM2.1 and SP2. Every time I export my movie back into my DV camera, it stops at the same point (29%) and just hangs. After waitng an hour or so, I click Cancel and a pop-up comes on displaying: "Active Title Bar" = Microsoft Visual C++ Runtime Library "Window" = Runtime Error Program C:\Program Files\Movie maker\moviemk.exe R6025 - pure virtual function call I've been successful many times before without problems. Not sure what's causing this? I notice in some similar posts it mentions "if you are crashing and get a chance to send the report into MS, please do so, then post back the bucket number". As it does not crash I cannot send an error report. I also noticed in other posts mentions of "Microsoft Visual Studio". I've never heard of this so don't believe it's on my computer? Any help on this matter would be greatly appreciated. -- Kind Regards to all... Jay Hewatt Tag: just stopped playing back Tag: 28956
  - 22
    - saving to cd after editing a home movie i try to save to cd it always freezes on 58% could anyone help on this problem Tag: just stopped playing back Tag: 28953
  - 23
    - Can't burn movie from moviemaker to DVD.... I am trying to burn the movie I made to a dvd-r disk and it will not work. I know my drives are installed properly and when I am asked to put the dvd-r or dvd+r into the correct drive I do and it does not recognize it. It will burn it to a cd-r but when I put that in my dvd player something comes up that says mp3 playlist. I want to be able to put the movie in a dvd player and play it for family members to see and also burn it so several other dvds to pass out as xmas gifts.. any help would be thankful. Tag: just stopped playing back Tag: 28951
  - 24
    - cant save as wmv, or edit videos the title says it all really, i cant save as wmv, or it crashes my comp, and i cant edit or cut clips or my comouter will crash, any suggestions of waht to do??? Tag: just stopped playing back Tag: 28949
  - 25
    - Playing a Movie Maker movie on a DVD player If you want to save your movie to a CD/DVD for play on a DVD player, what is the best format to save the movie in. Movie Maker saves the movie in a wmv file. Is it best to convert this file to some other file type before burning it to a CD or DVD? What DVD players will play a wmv file. I bought a HIGHMat Panasonic, but it says it supports WMA files, but does not mention WMV. Tag: just stopped playing back Tag: 28947

when i ad clips and pictures in same timeline it doesnt want to playback,

Re: just stopped playing back by Graham

Graham
Fri Dec 24 16:04:29 CST 2004

What sort of files are they, MM works best with avi video files and jpegs
can often cause trouble.

--
Graham Hughes
MVP Digital Media
www.dvds2treasure.com
www.simplydv.com

"ivan" <ivan@discussions.microsoft.com> wrote in message
news:D0C499BE-6215-405A-BA63-C97D11538730@microsoft.com...
> when i ad clips and pictures in same timeline it doesnt want to playback,

Top