my WMM froze

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Saving movie on DVD for a contineously Is there a way to make the saved movie play cintinueously like you would on a VHS tape. I want it to play all the way through and then start from the beginning again. Is there any way to do this? Tag: my WMM froze Tag: 49889
  - 2
    - Problem imorting I have a uncompressed avi which is a tutorial of an application running on pocket pc. When viewed in mediaplayer the pocket pc is normal size with approx 1/3 image and 2 X 1/3 black areas side by side. When I import into movie maker the video looks okay on the time line but is squashed in the preview screen. ie 2 black areas top and bottom. The outputted file is the same. How can I overcome this. Cheers SteveW Tag: my WMM froze Tag: 49888
  - 3
    - Over Laying Text Ok, adding text is easy to do. However, why is there no free-hand control? Is there another way of moving text vertically without putting text only in the middle of a picture? Tag: my WMM froze Tag: 49886
  - 4
    - A video capture device was not detected I have a Panasonic NV-GS17 digital camcorder with no bundled software. I've plugged this into the IEEE1394 port but Windows Movie Maker 2.1 fails to recognise it. What should I do? I have Windows XP Professional SP2. Tag: my WMM froze Tag: 49880
  - 5
    - Narration 'cut' short Hello All, Recently I have been having a problem with the narrations on my MM being cut short. As an example, I can record the narration and see the recording time of 29 seconds. However when I stop the recording and it adds the audio to the timeline it may only be 12 seconds (time is different). I can not figure out what is causing the issue. Any suggestions are welcome. I have tried recording different lengths (10 second intervals) and it will cut each one down, but not a consistent amount. I really do not want to do an uninstall/reinstall, but not sure what else to try. I have just under 8GB free on the hard drive so that should not be an issue. It worked fine the last 4-5 months and just starting acting up in the last week. I have not installed/uninstalled anything else for quite some time. Again, any help is appreciated! Jon Tag: my WMM froze Tag: 49875
  - 6
    - Missing source file Hi, can someone help me whit this problem. When i start making a movie afther i organzie the movie, Moviemaker gives a assage that the source file is missing. How do i know whisch file exactly is missing? I try to make now a AVI from my project. Thansk so far, Arie Tag: my WMM froze Tag: 49874
  - 7
    - An Interface has ... Trying to run WMM2.1 I get an error message "an interface has too many methods to fire from" I cannot use WMM2.1 Anyone know what this obscure message means and how to get past it? -- Andy Tag: my WMM froze Tag: 49868
  - 8
    - removing overlaying text from title slide I have text that is overlaying my title slide that I can't figure out how to remove. When I delete the title slide and creat a new one, it still appears. When I delete the title slide alltogether, it appears on the 2nd slide. Help! Tag: my WMM froze Tag: 49867
  - 9
    - adjusting Audio clip length How do I decrease the length of an Audio clip? I need to have different music for sections such as Players, Coaches, Families, and Game shots. -- Russ Tag: my WMM froze Tag: 49865
  - 10
    - Video Transition I think the answer to my question is probably simple but for the life of me I can't figure it out. Between video clips I want a blank black screen instead of a transition. Can someone please help me out with this? Thanks! -- K2 Tag: my WMM froze Tag: 49861
  - 11
    - Converting I would like to convert this movie that I made, but it won't convert... I'm sort of computer-chanllenged... help? ~ Cass Tag: my WMM froze Tag: 49860
  - 12
    - Photo Story 2 Can create a Video CD from photo story, however, it will not play in CD to launch Windows Media Player, or work in DVD that is VCD enabled. Hardware has been tested and works okay. Can copy and burn the *.wmv file to CD and it launches WMP in CD. Anyone having this problem? Tag: my WMM froze Tag: 49855
  - 13
    - locking title overlays we are useing audio to time where title overlays go. can you lock the overlays to the audio so you can split audio to add a movie clip. when adding clips audio moves but the title overlays stay in same position. this makes the timing off. this is a hard one good luck if you have an answer. Tag: my WMM froze Tag: 49854
  - 14
    - A though one: Deleted original source clip and WMM won't let me fi I posted this on another site and decided to give it a shot here... =================================== Hello, I think this is a tricky one. I have tried everything that I could think of. Here is the stoty: Added a 58:00 avi clip to my timeline... did a lot of chopping out of it ... so it turned into a 20 minutes, 30 little clips ... the exited WMM . my wife logged in and thought: "G, what is this 13 gb movie file doing in the desktop?" BAM source deleted. I tried 4 different "UNdelete" programs in windows but none could even find the file to bring it back... That 13gb file was created of 2 other smaller files. So I was able to recreate this 13gb file.... as far as I can tell (properties and all) it is exactly the same 13gb file I had before my wife deleted... but now on the time line when I try to Locate the Source (on the clips that have the little red X) WMM tells me the file isn't close to the original one.... Please Please think hard.. how can I recuperate this? I could just re-edit the new 13gb file, but it took me 3 hours originally... (many many cuts) Any ideas????? Thanks ============================= Re: A though one: Deleted original source clip and WMM won't let me to browse for source Posted: 04-20-2006 12:19 PM It it has exactly the same properties (same size, same signature, etc.) and the same name and same location (check by clicking on the Red X), then it *might* work. But if any of these are different (especially the size and file contents) then you would seem to be out of luck... -=Blaine=- ==================== Re: A though one: Deleted original source clip and WMM won't let me to browse for source Posted: 04-20-2006 01:31 PM exactly the same. even same location..... is there a way to force WMM to plug that clip in ? or \can you think of anything else i can do to not loose all the edit outs I did.... kind like replicate them on the new file? Tag: my WMM froze Tag: 49851
  - 15
    - Slide show, duration pics are shown. I'm strying to make a slide show for a soft ball team and would like to show pics in series for only 1 second each (pitchers pitching, hitting, running). The default is 5 seconds. How can I shorten them -- Russ Tag: my WMM froze Tag: 49850
  - 16
    - Second to AVI If I am having problems capturing to DV-AVI (jumpy), what is second, third, and fourth best capturing option for quality? Tag: my WMM froze Tag: 49849
  - 17
    - Video File Okay I'm burning a dvd, i added a windows movie maker video , that worked fine and I just want to add the video i shot with my digi cam onto with the other movies ,it gets done burning i slap it in the DVD player the videos i made wit movie maker are fine, but when my other stuff comes on it sounds like all slow motion and crazy how would i be able to Get the real sound back on it. because i want to use that sound ??? Just to lazy to figure it out myself i guess! thankya KJP Tag: my WMM froze Tag: 49848
  - 18
    - Video File Okay I'm burning a dvd, i added a windows movie maker , that worked fine and I just want to add the video i shot with my digi cam onto with the other movies ,it gets done burning i slap it in the DVD player the videos i made wit movie maker are fine, but when my other stuff comes on it sounds like all slow motion and crazy how would i be able to Get the real sound back on it. because i want to use that sound ??? Just to lazy to figure it out myself i guess! thankya KJP Tag: my WMM froze Tag: 49847
  - 19
    - Converting Video to Flash Hello, I would like to convert my video made in Windows Movie Maker to Flash in order to post on the web without controls. I used another program to convert it, however experienced alot of degradation in the visuals. Are there any conversion add-ins or other software tools that can be used to convert WMM Video? Thanks -- Mark Tag: my WMM froze Tag: 49846
  - 20
    - save to computer or CD not working I'm new to making movies. I did a 12.5 min project of jpegs, bmp, and wav files. When I saved the project to CD it played the entire audio and froze on about the 10th frame from the end. When I tried to save to the computer, it played the frames with no audio. I've been wracking my brain and going thru all the info I can find, but it doesn't appear that someone has had the same problem. HELP! Thanks, cgpop Tag: my WMM froze Tag: 49845
  - 21
    - How To Combine Video and Audio Hi all, Using DVD Decrypter, I've now been able to successfully import the video into Windows Movie Maker. But, since the files were from a DVD, the audio and video files are separate files. Both play fine separately, but is there any way to import them both at the same time or combine them? Thank you very much, Adam Tag: my WMM froze Tag: 49844
  - 22
    - Where to download background music for adding to videos Where can I get different types of background music from to add to the video? Is there a site that specialises in this sort of thing that anyone can recommend? By background music I mean music that sets the appropriate mood, slow paced for a quite scene of a summers garden, something faster for a fairground scene etc. Thanks Tag: my WMM froze Tag: 49843
  - 23
    - freeze - crashing when transcoding / saving movie file hello i got a pretty big projectfile, about 50 minutes of clips, titles, music. so if i click on save as movie file > dv-avi ...etc... the movie maker begins the transcoding into avi, but after a while maybe 40 minutes, he just stops and freezes the whole screen - i have to reset my computer. what could that possibly be? i had a problem with the movie maker a few weeks ago - it closed when i opened a certain project file. i renamed some codecfiles and switched off compatibility with some others and that fixed the problem. could the problem mentioned above be related to codecs, too? just an idea... thank you daniel Tag: my WMM froze Tag: 49842
  - 24
    - Can't edit audio I'm trying to mute the audio for a clip selected in the timeline, but the Audio menu under Clips is greyed out. I also tried adjusting the audio by moving the slider but that didn't do anything either. I have already muted the audio on two of the clips in the timeline but now it won't let me edit any of them. Help! Tag: my WMM froze Tag: 49841
  - 25
    - Importing "VOB" Files That Were Decryted Hi all, I burnt some tv onto a dvr+ on my dvd recorder. The files are/were in "VOB" format. I used DVD Decrypter to transfer to files from the dvd to my hard drive. I then changed the extension from "VOB" to "MPG". The new file plays perfectly in "Windows Media Player" version 10. But, when I try to "Import into Collections" the new file, the following prompt comes up: "The file C:\Documents and Settings\Owner\Desktop\1.MPEG cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to import the file again." Any thoughts? With much appreciation, Adam Tag: my WMM froze Tag: 49839
- Next
  - 1
    - split screen I want to do a split screen effect: On one side a static image and on the other several images in succesion... Is this possible with AddonFx or do I need to go elsewhere, i.e. Flash or another program to attempt to do this.. ? Thanks. -- dan Tag: my WMM froze Tag: 49838
  - 2
    - pausing after a pan or zoom I would like to find a way to stop a pan or zoom at the very end for a second or so before the transition to the next image. It would seem not difficult to someone who knows a little XML, i.e. not me.. :) Thanks for any help in advance. PS. I am using the Rehan pan zoom effects package for most of my pans and zooms. -- dan Tag: my WMM froze Tag: 49837
  - 3
    - how How do you get movie maker I have windows XP SP2, and is it any good -- help wanted Tag: my WMM froze Tag: 49834
  - 4
    - File Size Issue Hi, we just found out about Windows Media Encoder and have created some screen capture videos with it. The file size of the videos created with WME are quite small which we love, and the dimensions of the video are enormous (1280X1024). Unfortunately, after importing a video created in WME into Windows Movie Maker to make a few small changes (adding a title and fade-in), the size of the file that WMM exports becomes enormous, and the quality degrades noticably. Here is our information: Video file exported from WME Type: Windows Media Audio/Video File Size: 7.96MB Width: 1280 Height: 1024 Audio Bit Rate: 295kbps Channels: 1 (mono) Video Data Rate: 250kbps The same file modified by WMM and exported Type: Windows Media Audio/Video File Size: 38.9MB Width: 720 Height: 480 Audio Bit Rate: 907kbps Channels: 2 (stereo) Video Data Rate: 768kbps The first file actually is larger on the screen (note the width and height) than the second file. Also, the audio quality on both files sounds the same to me. None of the save options in WMM have any width and height sizes that even come close to the orginal file. This really frustrates me because the file is smaller, and of better quality after coming out of WME, but we need to use WMM in order to make the video look professional. Any ideas would be greatly appreciated. -karl Tag: my WMM froze Tag: 49818
  - 5
    - Program Crashes when credits are added I went to go add credits to the end of my fully edited (and ofcourse, UNSAVED) movie, and after filling it all out I press the "done , add credits" button, and the Program just SHUTS DOWN. It crashes. No error message, no error Reporting, the program acts as I'f I just pressed the X button in the right hand corner! And it wasn't just a one time glitch either! I just tried adding credits to another project, and the thing just shut down on me! HELP! I wanna make my movie! ~JYHASH Tag: my WMM froze Tag: 49813
  - 6
    - Big difference between DV-AVI and High Quality Video(NTSC)? I am importing my home videos from my camcorder's mini-dv tapes using windows movie maker 2. Is there a big difference between the DV-AVI and High Quality Video(NTSC) formats? I read an article that said there is not much noticible quality difference, and the High Quality Video(NTSC) format is one-eighth the size. I will then be using NeroVision Express SE (OEM version of Nero with the DVD Plug-In which I purchased) to create and burn the DVD file. Tag: my WMM froze Tag: 49804
  - 7
    - more than one photo at a time I'm trying to figure out how I can make a photo slideshow movie, but sometimes show more than one picture at a time (ie: two photos might crawl from opposite sides of the screen, one on top, the other on the bottom). I've pretty much come to the conclusion the Windows Movie Maker is incapable of doing this, but I'd be just fine if i could find a program that COULD manage this, and then I could save it as a movie file and THEN import it to Windows Movie Maker. Can anybody help me out?? -Mike Tag: my WMM froze Tag: 49797
  - 8
    - Burning problems I have Windows Movie Maker. I put together a movie of still digital photos, small video clips and a few slides in the middle with music to go with it. I saved the movie to my computer as a .wmv file and tried to burn it to a disk using AheadNero 5. After I burn it and try to play it, the still digital photos are moving to fast and the music does not line up with the pictures. What can I do to fix this problem? Tag: my WMM froze Tag: 49794
  - 9
    - Visual Acuity is lost what can I do? I used the movie maker and really loved it up until I saw the finished product. It had become blurry and fuzzy and lost it's nice CLEAR quality that my digital Cannon camera had taken. I wanted to decrease the size, but not make it look awful. I played around with changing the ways to "SAVE" the finished product and even with the highest quality for small there was no change. What am I doing wrong? Or is this just the best it can do? I decreased my 11MB down to only 2.6. Thank you, Antoinette Tag: my WMM froze Tag: 49791
  - 10
    - Can't trim clips after shutting down Hi, I worked on a project yesterday and was able to trim clips but when I opened it up today it won't let me edit the existing clips. Did I inadvertantly protect the project? Thanks Tag: my WMM froze Tag: 49790
  - 11
    - capturing will not start, option menu inaccesable, no saving video I dont get any reaction from Windows Movie Maker when trying to capture, acces options menu or saving video on pc.. downgrading to version 2.0 didnt work eiter.. Capturing and functionalities within Pinnacle Studio does not give problems.. Tag: my WMM froze Tag: 49788
  - 12
    - Newsletters - 2nd Anniversary Issue.... My newsletter this week is the 2nd Anniversary issue.... as last year, I made a special video to help commemorate it.... here's the link http://www.papajohn.org/Newsletters/100-2ndAnniversaryIssue.wmv it runs 10-1/2 minutes and is 60MB in size... -- PapaJohn Movie Maker 2 and Photo Story 3 website - http://www.papajohn.org MM2 Tips and Tricks: http://www.simplydv.co.uk/simplyBB/viewtopic.php?t=4693 Online Newsletters: http://www.windowsmoviemakers.net/PapaJohn/Index.aspx Tag: my WMM froze Tag: 49785
  - 13
    - General movie maker problems There's somethign very wrong with my movie maker. At first I thought it was a RAm problem so I deleted a lot and that's no longer problem but the problem remains. The problem is that Moive Maker seems to lock up when I do pretty much anything. Importing files, resizing clips, entering titles, even opening the transitions does oen of three things. Firstly, it just freezes and comes up with "Windows Movie Maker has encountered a problem and needs to close. We are sorry for the inconvenience", or it closes instantly, or " The instruction at "0x7c09723d" referenced memory at "0x2037436". The memory could not be "written". That one appears once or twice again after I click OK. POint is, it's virtually impossible to do ANYTHING without it screwing up. It's got worse and worse over time until finally it's unusable. -- Tag: my WMM froze Tag: 49782
  - 14
    - Movie Maker Encountered Error Every time I try to open or save a video project I get the famous "encountered an error" message. The following is the Error Signature. Any Help? AppName: moviemk.exe AppVer: 1.1.2427.1 ModName: mpeg2parser.ax ModVer: 1.1.0.76 Offset: 0008812 I am getting frustrated with not being able to proceed. -- dj the dj Tag: my WMM froze Tag: 49778
  - 15
    - Slideshow video freezes but audio continues My wife created a slideshow of old family photographs for my mom's 85th birthday along with some songs on an audio track. It plays fine in Movie Maker but when it is "finished" in NTSB high quality format for burning on a DVD (for distribution to my siblings) and I let it play in Windows media player the video freezes while the audio track continues just as it does in Movie Maker. I've tried to render it several different times and it always freezes at a different point, so I don't thing it is related to the photograph being displayed at the time. The first failure occurred at a transition from one song to another so I thought it was related to the songs involved, but as I indicated above, it fails at different points every time I render it, so it doesn't seem to be related to the music track. My brothers/sister and mom are really anxious to get a copy of this "movie" so I could really use some suggestions. Thanks in advance for any help you can offer Tag: my WMM froze Tag: 49777
  - 16
    - Exporting from Photostory 3 Is there a way to get the background audio files from Photostory and use them in WMM? newtechie Tag: my WMM froze Tag: 49768
  - 17
    - Extension I have a JVC DVD Video/Picture Camcorder and the movies it makes aren't recognizable by Movie Maker. How can I get them to movie maker? Rimmer Tag: my WMM froze Tag: 49766
  - 18
    - Using MyDVD to burn to DVD I just purchased MyDVD to burn a Windows Movie Maker file to DVD. Goes though the process (long time) until it pops up a windows media window. This window tells me that I can have it perform this action everytime I go through this process. I t thens lists things like burn to CD, and wwrite to a file but does not have an option to burn to DVD. Is there something I need to download for Windows media? It appears that this final step keeps the file that has been processed from every writing to my DVD. It shows up as an empty disk (on computer and in DVD player). My DVD is a DVD -+R and I'm using a DVD -R. -- kentthom Tag: my WMM froze Tag: 49764
  - 19
    - movie maker I have a JVC hard drive video recorder, it records files as .MOD. How do I convert them to a format (eg mpg) that movie maker will recognise? Tag: my WMM froze Tag: 49762
  - 20
    - muting part of a clip how do I mute part of a clip? and how do i mute a clip? Tag: my WMM froze Tag: 49759
  - 21
    - New ATI All-in-Wonder driver issue In the lastest update ATI seems have shifted from a Rage Theater cature driver to a AV Stream T200 or something like that. The result is that all capture features are gone for all programs except ATI's. The rage theater used to be recognised as the capture devive. This was part of some WDM download and driver update. Anyone with a 9800 All-in-Wonder or other ATI card have problems since last driver install? Tag: my WMM froze Tag: 49758
  - 22
    - How to prevent movie file from being downloaded I created a movie file in Windows Movie Maker. How can I show it on my website but prevent peole from donwloading it to their computer? Tag: my WMM froze Tag: 49757
  - 23
    - additional effects or credits animations greetings to the group i was wondering if somebody can tell me where can i download some new effects or credit animation that are different than the ones that are already integrated?? thx in advance Tag: my WMM froze Tag: 49753
  - 24
    - saving to a recordable cd I'm trying to save the video i made into a recordable cd. So everything works up until the part where it's saving onto the cd. it goes smoothly until it goes up to 14%. Then it stops entirely, and the minutes remaining keeps rising up. It goes from 60 minutes up to 300 minutes, and still goes up. Can anyone please tell me what the problem is and how to fix it? This is really important, thanks. Tag: my WMM froze Tag: 49747
  - 25
    - Importing Video Clips I recorded some videos on my phone and then transferred these to the PC. I then opened up Windows Movie Maker and tried to import the videos (which were in MP4 Format) into WMM. I received an error, and I noticed that Movie Maker does not support these files. So I downloaded a converter for MP4 files. I converted all my videos to MPEG format since WMM allows these types of files. I then tried importing the converted file, and I received this error message: ''The file _____ is not indexed and cannot be imported.'' What does this mean? I really want to import my videos into WMM, but I can't find any other way. Help would be greatly appreciated. Tag: my WMM froze Tag: 49745

i was exploring on my MM and i found this auto movie feature. i tried it out
and suddenly my MM froze. the music and the video wasnt working

help pls

Top