Sound plays too fast when importing DV
When importing my clips with sound (.avi), the sound is
not syncronised with the video and is about 100 times too
fast.
Any help would be greatly appreciated Tag: no device Tag: 8976
Timing in Moviemaker
Hello!
I'd like to make a movie with several static images in it.
Each static images should be displayed for about 5
seconds? Is this possible with the windows moviemaker?
I hope you can help me.
Doris Tag: no device Tag: 8973
the effects for movie maker is not enough
the effects for movie maker is not enough.i don't find a
lot of effects and trans.for example
blaster,raining,lighting etc.please send me if you know
how to find them.thank a lot! Tag: no device Tag: 8972
Final Render Video Stops - Audio Continues
I have a project that I cannot seem to make into a
movie. I've tried saving to PC, CD, and DV Camera. All
indicate a final file size of around 85 meg. Movie is
12:45 (minutes) long
I only get errors trying to go to DV camera, but no error
reason. Saving to CD or PC, the software proceed
normally. When viewing the final movie, video stops,
audio continues, at about 50% point. No info in help
talks about max file size, etc. Each save gets me a
little further.
Any suggestions? Tag: no device Tag: 8971
playing PAL video, Audio sounds like Chipmonks
I can't convince my PC to play my home video taken from
my Sony Cyber Shot Camera to play back on the StoryBoard
like it does in the collections window, or when i play it
in windows media play. It sounds like the Chipmonks. I
know the videos are in PAL mode, I changed the Options
setting to reflect PAL, and i tried NTSC to but i still
here Alvin and his buddies. Can someone please help me!
My ultimate goal is to convert the videos to NTSC.
Thanks Tag: no device Tag: 8966
compatibility movie maker & media player
Why in the name of God can't media player read the video
project made with movie maker? I get a message that
tells me that media player can't read the kinda file that
movie make just made....they are both made by windows.
What am i missing??? Tag: no device Tag: 8962
Blurry photos
When I review the video that I made using only photos
from my digital camera, my photos are very blurry. It is
even worse when I see it in full screen. When you click
on the photo to view it on the screen before dragging
it down to the timeline it is clear. Is there something
that I am doing wrong or do I have a setting incorrect?? Tag: no device Tag: 8961
Windows
I have a Windows Media audio/video file which when I open it in Media Player is 11 mins 3 secs long. But when I import it into WMM, it thinks it's only 16 seconds long. Is there a way to set the properties (or fool WMM) so that I can restore the duration to 11:3, which is right? Tag: no device Tag: 8960
No ones been able to help with this not even Intell ...
Intell made my motherboard. It was manufacured in Sept of 2003 ... so it's
new ... I'm running a P4 at 3.0 ghz and I have 1 GB of 400 DDR ram.
I made a 13 minute slide show using WMM2 and although the final product was
a WMV ... (I can't find any way to convert WMV to any other format) ... so I
forced Roxio CD/DVD creator 6 basic to author this WMV to burn on a DVD-R
... after what was supposed to be a successful burn (took 45 minutes) I
discoverd that I could not view any files on the DVD ... by R-clicking on
properties ... and after careful observation I discoverd that I cannot view
any files on any disks ...THATS ANY DISK not music, not images, not .exe or
program disk ... I can't even do a reinsatll of my OS ... because it says my
file system is RAW ...insert a disk ... how can one insert a disk when one
is already inserted??? At the roxio forum someone suggested that I was full
of ... it and that this could never have happened... intell never hear of it
... my DVD burner company say it's not them ... well anyway I've got 1100
bucks invested in my home built computer and after this failed burn cannot
use any of my optical drives ... This RAW file format ... from a search at
google suggests it's a non-formated hard drive ... YIKES ... when did my
CD-roms become hard drives ... anyway I need some help ... if you can ...
please I dont understand how this newgroup thinkg works ... I've been here
two hours and hope this will post ...I've spent what seem hours looking but
..sure wish you could search posts for help ... if you've got an answere I
really need the HELP ... FalconMcRi@cox.net ... oh ... btw ... I've checked
out my DVD burner and my CD-rw and they work fine in my previous computer. Tag: no device Tag: 8958
partial import syndrome
i can import most dv-avi files into MM2 with no problem.
however, certain files only get 'partially' imported.
case in point; i've captured some footage from my dvcam
that's 1.2GB, and lasts 6:20. however, once imported that
file is inexplicably reduced to only the first 20 secs!
there's no way of adjusting the capture size limit - i've
checked. and what's more, i've imported bigger files in
the past.
what gives???
any help greatly appreciated. Tag: no device Tag: 8956
divide and conquer
I am wondering if it is possible to break up a large video
project into smaller sections, edit them as needed and
then when each is finished, combine them into the final
finished project.
Once a particular section is finished, it seems wasteful
to have to re-render all that again just to see how the
new section is coming along.
Thanks,
Phil Tag: no device Tag: 8953
export problems
I am having trouble exporting my movie in any fashion.
When i try to make a WMV file, or save it to a CD, it
fails and then gives me a message: "check to make sure my
source files are still availible, the destination location
is still available and the destination location has enough
space" -not in those words but that is what it says. I can
open and play and edit my movie no problem-so the source
files are still there and uncorrupted, and I even did a
test where i made a project the same lenghth (just
cutting and pasting)with the same source materials and it
worked! I have a ton of room on my computer too. I am at a
loss and desperately need help. thank you very much Tag: no device Tag: 8948
Making video tape of MM output
Can anyone pleass advise how I can save my MM movies to a
digital or Super VHS tape. I don't have a camera or VCR
with 1394 but do have each with S-Video input.
Thanks in advance,
Al Gonzales Tag: no device Tag: 8945
Why does Auto Movie not work
The Auto Movie feature seems to create another version of
the storyboard without the selected background music and
tack it onto the end of the existing storyboard.
The Help led me to believe it would add background music
and produce a finisked film. Tag: no device Tag: 8943
Conflict between Movie Maker 2 and WinFax
It seems whenever I use Movie Maker I have to re download
Direct X 9 in order to restore the Answer Calls as Fax
option.
I also find that Movie Maker needs a new download of
Direct X fairly regularly otherwise the movie audio
sounds strange. Tag: no device Tag: 8942
Ticking sound at clip transition
I'm using mm2 to edit DV from my PC101. My finished
video sounds fine on my computer. When I save the video
back to DV tape on my camera I get a single tick noise at
each clip transition.
Anyone know what's causing the tick?
thanks,
Jeff Tag: no device Tag: 8936
"is not a valid date"
When I changed the page to type a message ,I got a warning window-lexplorer "is not a valid date".If you don`t clear it you are locked up,don`t have a clue.HELP! Tag: no device Tag: 8933
Video effects dont work, please help.
If i add "icrease brightness" to a clip the app just switches off. No history of it or anything. I am stumped. Please advise. Tag: no device Tag: 8930
MM2 limit on number of slides?
I tried to create a movie with about 800 slides (~40 minutes with 5 sec/slide and transitions). I have a fast machine (2.8Ghz hyperthreaded P4, 1GB RAM, 200GB disk, 3GB swap), but once I added the transitions and music, MM2 slowed to a crawl. In an attempt to make it more reasonable, I split it into two shows of about 400 slides each. It helped, but not much.
But here's real problem #1. When I tried to save the movie as avi, I got a "not enough disk space" message even though I have scads of available space and the swap is distributed across physical disks. I was able to save the movie as wmv.
And here's problem #2. The first movie shows the first 238 slides and then gets "stuck" on the 238th slide even though the music continues. The second movie gets "stuck" after 134 slides and shows black (even though there isn't any black with the transitions I used). At first, I blamed the DVD burning software, but it's the wmv file itself--confirmed by using windows media player.
Any ideas about what's going on?
RobertJ Tag: no device Tag: 8928
Extend time on Volume Fades and Effects?
Is it possible to extend or adjust the time on the Volume Fade-In or -Out? How about adjusting the time on the Video effects? Tag: no device Tag: 8927
Moviemaker 2, A followup
To those of you who have been following my complaints
regarding Moviemaker 2 since around 8 December, and have
yourselves contributed suggstions, I offer this bit of
information.
Dump the freebee MIcrosoft Moviemaker program, I will bet
that I alone have forwarded at least 50 of those
automatic problem reports to Microsoft.
Get out your wallet, brush away the moths, and Invest
around $70.00, to get a boxed copy of ROXIO EASY CD
CREATOR, rev 6 platinum.
I tried it myself,you will be amazed at the results with
transitions, titles and music. The operating controls are
similar to the remote control on your television.Then
when you are thru, a second portion of the
program/package, allows you to drag and drop the video to
CD.
Another option at about the same price level, is PINNACLE
STUDIO 8, And if you are willing to go up to the $100.00
range, there is Another ROXIO product called VIDEO STUDIO
7.
Now if I can get Microsoft to fix an annoying fault in
MONEY 2004, I will be a happy man.
Merry Christmas, Chanukka, Feliz Navidad (which ever
applies) to all.
Don Taylor
This is not a paid commercial. Tag: no device Tag: 8921
Capturing video halts...
While capturing video from Sony Digital HandyCam the video halts without
warning. The video that is captured up to that point is fine. The HandyCam
is still playing the video but the capturing is halted. It's happened at 3
different points in the video. Any solutions?
Thanks
Paul Tag: no device Tag: 8920
v ideo capture
I am trying to capture video from my DV recorder through
the firewire connection and somehow the connection is not
recognized by any of the capture software. Anybody has
idea what may be happening?
Here are the details:
recorder: jvc GR-DLV-805
OS: Windows XP pro
1394: ASUS P4C800-E on-board + now I have a ULEAD DV
board installed; according to the device manager they are
both functional
DirectX 9.0b installed
No DV capture driver (???) is found anywhere on my
computer
What else can I try? Tag: no device Tag: 8916
Automaticly exiting program
When I try to add an effect to my project, the program just closes... No error, just goes down
Just re-installed XP 2 hours ago, hoping this was the solution, but no.
Anyone with some ideas on this one, please help.. Tag: no device Tag: 8915
how to uninstall Movie Maker
The question is in the subject :-) My Moviemk.exe got
corrupted but XP won't let me remove it. It sees it as a
protected system file...
Can anybody help? Tag: no device Tag: 8914
mm2 won't import
I've read the last 2,000 messages on this board and a good part of the papa
john site.
I can:
1. capture, view and play a dv avi in Adobe Premiere
2. capture and preview while capturing in MM2
I cannot:
1. play raw dv's captured in either Premiere or MM2 in Media Player
2. render these dv's in G-Spot
3. when I capture with MM2, it dies on attempting to import. However the
file is created and can be imported into Adobe Premiere.
I have three machines: P4, P3 and P4 Toshiba laptop. The P3 plays and
renders the above files. I have compared the loaded codecs and neither the
P4 nor the P3 have any that are not on the P3.
Media Player started acting funny after one of the service fixes since
October 1. Has anyone dealt with something similar successfully?
________________________
Sincerely,
Carey Robson Tag: no device Tag: 8913
What in the world made this happen?
ALRIGHT THIS IS WHAT EVERYONE IS LOOKING FOR ONLINE.
A MAGIC HAT THAT SHOOTS OUT MONEY FOR NOTHING.IT IS SO
INGENIOUS NOT TO MENTION LEGAL YOU MIGHT SH#T YOUR PANTS
WHEN YOUR DONE READING THIS SO GET STARTED!!! BUT YOU
HAVE TO FOLLOW IT TO A LETTER FOR IT TO WORK!!!! :
A little whileback, I was on my computer having a grand
old time, just like you are
now and came across an article similar to this that said
you could make thousands
of dollars within weeks with only an initial investment
of $6.00! So I thought, "Yeah,
right,this must be a scam", but like most of us, I was
curious, so I kept reading.
: Anyway, it said that you send $1.00 to each of the 6
names and address stated in the article. You then place
your own name and address in the bottom of the list at
#6, and post the article in at least 200 newsgroup.
(There are thousands)
No catch, that was it. So after thinking it over, and
talking to few people first,
I thought about trying it. I figured what have I got to
lose except 6 stamps and $6.00, right? Like most of us I
was a little skeptical and a little worried about the
legal aspects of it : All, So I checked it out with the
U.S. Post Office (1-800-725-2161) and they confirmed that
it is indeed legal! Then I invested the measly $6.00.
Well GUESS WHAT!!?. Within 7 days, I started getting
money in the mail! I was shocked! I figured
it would end soon, but the money just kept coming in. In
my first week, I made about $25.00. By the end of the
second week I had made a total over $1,000.00! In the
third week I had over $10,000.00 and it's still growing.
This is now my fourth week and I have made a total of
just over $42,000.00 and it's still coming in rapidly.
It's Certainly worth $6.00,and 6 stamps, I have spent
more than that on the lottery!!
: Let me tell you how this works and most importantly,
why it works? Also, make sure you print a copy of this
article NOW, so you can get the information off of it as
you need it.
STEP 1: Get 6 separate pieces of paper and write the
following on each piece of paper
"PLEASE PUT ME ON YOUR MAILING LIST."
Now get 6 US $1.00 bills and place ONE inside EACH of the
6 pieces of paper so the bill will not be seen through
the envelope to prevent thievery. Next, place one paper
in each stating the above phrase, your name and address,
and a $1.00 bill. What you are doing is creating a
service by this.
THIS IS ABSOLUTELY LEGAL! Mail the 6 envelopes to the
following addresses:
#1)Jonathon Markwood 3308 Birdsong Way Birmingham, AL
35242
#2) P. Ortner 29 Briarlee Dr. Tonawanda, NY 14150
#3)Jarod Astwood 2125 Seaport Circle Apt.215, Winter Park
FL 32792
#4) Ricky DeMaio 471 McCutcheon rd, Hudson WI 54016
#5)Justin Schuster 221 N. Huron St. Wheeling, WV 26003
#6)Joe Lamberti P.O. Box 9201 Waterbury, CT 06724
STEP 2: *DO NOT TAKE OFF #6 AND PUT YOUR NAME AND
ADDRESS!!*
-- take the #1 name off the list that you see above, move
the other names up (6 becomes 5, 5 becomes 4, etc?.) and
add YOUR Name as number 6 on the list.
DO NOT TAKE OFF #6 AND PUT YOUR NAME AND ADDRESS!!
STEP 3: Change anything you need to, but try to keep this
article as close to original as
possible. Now, post your amended article to at least 200
newsgroups, message board.
(I think there are close to 24,000 groups) All you need
is 200, but remember, the more you post, the more money
you make!
---- DIRECTIONS----HOW TO POST TO NEWSGROUPS, MESSAGE
BOARD----------
Step 1) You do not need to re-type this entire letter to
do your own posting. Simply put your cursor at the
beginning of this letter and drag your Cursor to the
bottom of this document, and select 'copy' from the edit
menu. This will copy the entire letter into the computer
memory.
Step 2) Open a blank 'notepad' file and place your cursor
at the top of the blank page.
From the 'edit' menu select 'paste'. This will paste a
copy of the letter into notepad so that you can add your
name to the list.
Step 3) save your new notepad file as a .txt file. If you
want to do your postings in
different sittings, you'll always have this file to go
back to.
Step 4) Use Netscape or Internet explorer and try
searching for various newsgroups (on-line forums, message
boards, chat sites, discussions.) Just example you log on
any search engine like
yahoo.com,google.com,altavista.com, excite.com then you
search with this subject ?millionaire message board? or ?
money making message board? or ?employment message board?
or ?money making discussions? or ?money making forum? or ?
business message board? etc. You will find thousand &
thousand message boards.
Click one by one then you will find the option post a new
message. :
Step 5) Visit these message boards and post this article
as a new message by highlighting the text of this letter
and selecting paste from the edit menu. Fill in the
Subject, this will be the header that everyone sees as
they scroll through the list of postings in a particular
group, click the post message button.
You're done with your first one!.
: Congratulations? THAT'S IT! All you have to do is jump
to different newsgroups and post away, after you get the
hang of it, and it will take about 30 seconds for each
newsgroup!
** REMEMBER, THE MORE NEWSGROUPS OR MESSAGE BOARD YOU
POST IN, THE MORE MONEY YOU EILL MAKE!! BUT YOU HAVE TO
POST A MINIMUM OF 200
** That's it! You will begin receiving money from around
the world within days!
You may eventually can rent a P.O. Box due to the large
amount of mail you will receive. if you wish to stay
anonymous, you can invent a name to use, as long as the
postman will deliver it.
**JUST MAKE SURE ALL THE ADDRESSES ARE CORRECT.
** : Now the WHY part: Out of 200 postings, say I receive
only 5 replies (a very low example). So then I Made $5.00
with my name at #6 on the letter. Now, each of the 5
persons who just sent me $1.00 make the MINIMUM 200
postings, each with my name at #5 and only 5 persons
respond to each of the original 5, that is another $25.00
for me, now those 25 each make 200 MINIMUM posts with my
name at #4 and only 5 replies each, I will bring in an
additional :$125.00! Now, those 125 persons turn around
and post the MINIMUM 200 with my name at #3 and only
receive 5 replies each, I will make an additional
$625.00!
OK, now here is the fun part, each of those 625 persons
post a MINIMUM 200 letters with my name at #2 and they
only receive 5 replies, that just made me $3,125.00!!!
Those 3,125 persons will all deliver this message to 200
newsgroups with my name at #1 and if still 5 persons per
200 newsgroups react I will receive $15,625.00! With an
original investment of only $6.00! AMAZING!
When your name is no longer on the list, you just take
latest posting in the newsgroups, and send out another
$6.00 to names on the list, putting your name at number 6
again. And start posting again. The thing to remember is,
do you realize that thousands of people all over the
world are joining the internet and reading these articles
everyday,
JUST LIKE YOU are now!! So can you afford $6.. and see if
it really works?? I think so?
People have said, 'what if the plan is played out and no
one sends you: the money? So what are the chances of that
happening when there are tons of new honest users and new
honest people who are joining the internet and newsgroups
everyday and are willing to give it a try? Estimates are
at 20,000 to 50,000 new users, every day, with thousands
of those joining the actual Internet. Remember, play
FAIRLY and HONESTLY and this will work. Tag: no device Tag: 8912
DeInterlacing Captured Video
I've noticed that when I capture video using MM2, the video is interlaced.
Is there a way to deinterlace the video as I capture it?? If not during
capture, is there a way to deinterlace the video after it's captured??
BTW, I'm trying to capture the video in DV-AVI format. And I've already
looked at PapaJohn's web site and didn't find anything there...
All and all help is greatly appreciated,
stefan Tag: no device Tag: 8906
Movie Maker 2 closes
When adding an effect or Transition to the storyboard,
Movie Maker closes. No erors or anything, just closes.
Doesn't matter which way you add the effects or
transitions, as soon as it tries to add it to the
storyboard it closes, this is on XP. any ideas? Tag: no device Tag: 8905
It shuts down automatically
My movie maker loads fine, but when I try to work on my movie, it automatically shuts down. There is no message or pop up box. It does this every time. I'm working on MM2. I have winxp. Help!!! Tag: no device Tag: 8904
Audio absent during capture
I'm just learning to use Windows Movie Maker, which came already loaded on my new Dell Dimension 8300, running Windows XP. I'm using a Pinnacle LINX-2 capture device from my analog super 8 video camera to my computer. During the capture process, in Movie Maker, the video previews fine but I don't get any audio. However, when I play back the captured clip, the audio is there. Any suggestions as to why the audio can't be heard during the capture?
Pawking Tag: no device Tag: 8900
MM2 Problems
Everytime I import a clip into MM2 I get a pop up box
saying: Windows Movie Maker has encountered a problem and
needs to close. We are sorry for the inconvenience. Then
askes me to send or don't send the report. I check out
the what the error report contains and it says: Error
signature: AppName: moviemk.exe AppVer: 2.0.3312.0
ModName: subtitds.ax ModVer: 1.4.0.0 Offset: 000066a2.
Then after i send it I click on more information and it
says this on a webpage:
Analysis Information
Thank you for submitting an error report. The error was
likely caused by:
Subtitle (subtitds.ax)
Subtitle (subtitds.ax) is distributed by many companies.
Please contact the company that provided you with
Subtitle (subtitds.ax). If you are unsure about which
company provided you with Subtitle (subtitds.ax) contact
Tobias Waldvogel.
It seems there is an error with Subtitle (subtitds.ax),
correct? How do I fix this? Tag: no device Tag: 8899
Audio mutes when scrubbing
I am new to Movie Maker. I have created a Project with a
timeline.
When I scrub along the timeline or in the preview window,
the audio becomes muted and will not play even when I stop
scrubing and simply play the clip.
The audio can be restored by clicking on Clip on the
toolbar then Audio then Mute (this does not resore the
sound yet) then clicking again on Clip, then Audio and
then unchecking the (by now checked) Mute box. This is all
a bit tedious as the muting occurs every time I scrub
forward or back and can only be restored by going through
the above elaborate routine
I have tried reinstalling Movie Maker but the problem
persists and I have created another project and the same
problem occurs.
Any suggestions for curing the problem? Tag: no device Tag: 8896
can't upgrade
hello, i've got a problem,
if I try to install mm2 it gives the following error:
error 1904. registration of module C:\Program
Files\Moviemaker\WMM2AE.dll failed. HRESULT , contact
helpdesks for help Tag: no device Tag: 8884
video capture
when using averDVD ezmaker usb 2.0 video maker, keep getting message "failed to build mpeg capture graph or unable to connect to capture pin"
using usb 2 connection to computer & scart socket connection to anologue vcr, can get no pictures or sound from vcr to windows movie maker. Tag: no device Tag: 8874
How can you tell...
If you have MM 2.0? The Help About in mine does not say that it is 2.0, but
I downloaded and installed the 2.0 exe. Tag: no device Tag: 8872
cant select all from collections
Hello there.I am using MM (5.0)that came with Windows XP
professional.I am trying to piece together a small movie
consisting of the numerous mpegs I have downloaded.When I
use the IMPORT VIDEO function,I can select one file and
it automatically goes into the COLLECTIONS pane.Try to
select more than one file and they all go into the
COLLETIONS folder and NOT into the pane itself.Why is
this ? Now that I have imported X number of files into
the COLLECTIONS folder is there any way to select more
than one file from the folder to put into the pane?
Also how do I clear the Collections folder. Tag: no device Tag: 8871
playback to fast
when i put my movie clips together then play them back they play like there on fast forward ,what am i doing wrong or how can i fix it, they playback ok on there own with real player ? Tag: no device Tag: 8869
Capture Issues - Black Preview screen
Any/all -
I've been using my computer for about a year to capture
and edit video with tremendous success, however after
returning from my most recent trip I'm now unable to
capture anything from my camera. The computer is talking
to my canon optura fine, I have complete control, so
definately not a 1394 issue. When the camera plays the
preview screen is black/blank. Same thing happens when I
attempt to capture footage. THe problem exists across
applications (MM2 and ULead VStudio). I've reinstalled
Media Play, ULead Vstudio, and the Media encoder. I've
searched a couple of pages but I haven't been
successful. Any help would be appreciated, I need to
capture and edit 20 tapes of underwater footage and mail
them out as christmas presents..ya.. I know crazy.
thanks Tag: no device Tag: 8868
Movie Maker2
I made a movie with MM2 it plays on my computer but not
in my DVD player nor the one at my school.
I get "wrong format" error on my DVD player.
I found a site that says it can change the format, does
anyone know of this and does it work (Dr. Divx,
DivX.com? Please let me know as these are Christmas
presents and I desparately need to get this movie saved
to a format that can be read in their cd/dvd players.
Thank you in advance for your assistance. Tag: no device Tag: 8866
Red Xs in timeline
My 23-minute movie was finished and saved. It froze; I
had to shutdown and restart my computer. Fortunately,
(like before) XP restored my movie maker file, however,
there were red X's in place of all my video clips and
audio clips. (Titles and Audio/Music are OK. I am just
sick. What has happened? What did I do wrong? Can this
be fixed? This was the 3rd time it froze on me but
previously everying thing was as just fine after the re-
boot. Tag: no device Tag: 8865
Movie Maker 2
Movie Maker came with my Win XP I upgraded to Movie Maker 2 but some functions are not active ;ie, Title animation, change fonts and color Tag: no device Tag: 8860
movie maker 2 great, but how to convert for dvd copy?
I downloaded my videos from an analog camera through
hauppauge and I edited and made my movie which is
beautiful but when I use my dvd burner NTI to copy to vcd
it says not right format but movie maker 2 doesn't let
you change the file name help i'm frustrated. Tag: no device Tag: 8858
Slide show -- auto slide durations to match music
Is there a way to use MM2 to create a slide show so that the slide durations will be automatically adjusted to fit the length of an audio track? Further, can I apply the same transition between all slides at once
thanks
RobertJ Tag: no device Tag: 8856
Windows Movie Maker 2 ends abruptly
When a click on a video efect it ends abruptly.
This only happend when i upgrade the original mmaker that
cames wid XP with the MMaker2.
Any suggestions are wellcome Tag: no device Tag: 8853
Movie Maker tells me I have no device when I try to run program. Also when I got my computer I did 'nt recive instructions
and am tired of going to help to learn more . Any suguestions