Decompressor
I can't get my movie to play on my home computer. Works
fine at the office but at home I get a message
"Can not play video stream; no suitable decompressor can
be found"
Any ideas on what I can do? Tag: computer hang Tag: 6517
VIdeo Effects and Video Transitions
As soon as I select an EFFECT to put into movie.... the
Movie Maker program closes.....
Creating movie works well just trying to apply effects
causes problem... I have change ATI Catalyst drivers...
from 3.8 down to 3.6 and back 9uninstaller using ATI Un-
installer)
Sys:
AMD +2600 Athalon / 512 RAM / ATI RADEON 9700PRO
Thanx
D Tag: computer hang Tag: 6515
Save a .wmv file after trimming, without re-encoding??
This involves the same project I just discussed in another post, but a
different problem I had.
After encoding the file (ripped from DVD) to .wmv (using Windows Media
Encoder), I discovered that an extra hour had been added to the video! At
the beginning of the video, it just stays stuck on the first frame for an
hour, before starting the actual movie. The total film length (on the .wmv)
is exactly an hour longer than the original film.
Strange, anyone know why that might have happened?
Regardless, easy enough to cut off that hour in Windows Movie Maker, to set
the beginning trim point where the real movie starts.
The problem is, what to do then? Of course, I want to save the .wmv with
that change, with the extra hour trimmed off. But when I click on "save
movie file", it looks like it wants to re-encode the whole movie, asks me
about encoding options, etc. I do not want to re-encode the movie, just save
it as presently encoded, with that extra hour deleted. Is there any way to
do that, to save an existing .wmv file which had been altered, without
re-encoding it? Or is that the only way to do it?
Thanks again for your help. Tag: computer hang Tag: 6512
Adding subtitles to a .wmv??
In this case, a movie from a DVD which I bought and own, but want to also be
able to watch on my PPC. I was able to rip the DVD files with DVD decrypter,
and convert the video to a .wmv file, and the audio to a .wma file (both
formatted for PPC). It looks like I can stream the audio and video together
using Windows Media Stream Editor.
I was finally able to rip the subtitles too, into a .sub file. But I cannot
see any way to convert that into a format accepted by the Windows Media
Stream Editor, which seems to only open wma, .wmv, and .asf files.
How can I merge those subtitles in the .sub file with the .wmv file?
I appreciate your suggestions. Thank you. Tag: computer hang Tag: 6508
Importing video error
When I attpemt to import a mpeg clip, MM2 tells me the
file could not be imported and "An interface has too many
methods to fire events from". Anyone know what's going
on? Tag: computer hang Tag: 6503
Muting the sound on a video clip, so only the audio clip sound plays
I am able to change the balance between the sound from
the video clip and the sound on the added audio/music
clip, but only by changing the balance for the entire
project. I have a few clips in my film where I want to
override the sound that was originally recorded with the
video, and have only the sound form my added audio clip
play.
If I keep my audio levels in the middle (this function
seems to effect the entire project) and increase the
volume of my added audio clip, this drowns out the video
sound...but it's very loud and distorted.
If I put the audio levels all the way to the audio/music
side...those few clips are fine...but he rest of my film
is silent.
Am I missing something, or is this just a limitation to
the software? Tag: computer hang Tag: 6499
My MM2 Crashing Solved
I was able to solve my crashing (white box of death)
right after startup of MM2 by uninstalling a windvd add
on i had added called dvd xpack, which was supposed to:
"The DVD XPack instantly adds DVD playback to Windows
Media Player in Windows XP. Installs the same theater-
quality video and audio decoders proven by over 45
million users of WinDVD - the world's leading software
DVD player."
I don't understand the incompatibility, but i can still
play dvd's in wmp, and mm2 now works just fine. why did
i install it in the first place?
(By the way, I was prompted to uninstall the windvd stuff
by a post on one of the forums, but i looked at so many
that i lost track of the specific post that led to this
solution--thanks to the poster who provided this
suggestion!) Tag: computer hang Tag: 6498
Sending movie to DV-CAMERA
am creating a video photo album out of windows movie
maker. I have created many have had no problems. My
problem sending back to my Sony dcr-trv330. When I'm done
with the movie - I send it back to my dvcamera (to
transfer to vhs - It goes to the camera fine but When I
play it back in my camera - the sound is distorted in
areas. I have tried and tried and tried to resend it -
shutting everything down in the BACK GROUND thinking I was
getting an interference somewhere. Still didn't work. I
also disconnected my Internet thinking that was the
problem. Still again no-go. It goes to CD fine and saved
to My computer fine. But once it's going to the camera it
seems that something is snagging it in areas. it's not
certain areas because everytime I send it - it goes good
and than all of a sudden seems like something snags it!
it's scratchy! PLEEAAAAAAAAASE HEEEEEEEEEELP KB Tag: computer hang Tag: 6495
Project takes forever to load
Hi
Just wondering if anyone knows why my project takes
forever to load. I have approximately 50 pictures on the
timeline or 5 mins worth of info. My computer is a amd
athlon processor with 40 mbs ,855 mhz and 256 ram. Will
this slow loading affect my burning of the cd?
Also is there an easier way of finding someting in the
forum as opposed to scrolling down and checking each
entry. Something like a search? The search on the screen
does not really find what I key in.
Thanks Tag: computer hang Tag: 6494
re sending movie to DV-Camera
I have created a video photo album out of windows movie
make. I have done this many times and have had no
problems. My problem is.... When I'm done with the movie -
I send it back to my dv=camera (to transfer to vhs) - It
goes to the camera fine but When I play it back in my
camera - the sound is distorted in areas. I have tried and
tried and tried to resend it - shutting everything down
in the BACK GROUND thinking I was getting an interference
somewhere. Still didn't work. I also disconnected my
Internet thinking that was the problem. Still again no-
go. It goes to CD fine and saved to My computer fine. But
once it's going to the camera it seems that something is
snagging it in areas. It's not certain areas because
everytime I sent it - it was going good and than all of a
sudden something seemed like it was snagging it up! it's
scratchy! PLEASE HEEEEEEEEEEELPPPPP KB Tag: computer hang Tag: 6493
Movie Make Hangs
I have a problem with mm2 hanging when editing movie. I
get the message "movie maker has runinto a problem and
needs to close sorry for the inconvience". I read that
this happens with the NIVIDIA video card, but I don't
have. It appears to only happen with video inports that
display a green video clip rather then a picture. I think
I have a software conflict, but I don't know how to solve
it. When I try to run conflict search on Wmm2 it states
that it is part of the operating system and can't check.
Can you help? Tag: computer hang Tag: 6490
moviemaker won't burn
i made a story and try to burn it on a cd but it won't
burn it tell me that it is copying to cd but right before
ti finishes it say an error has acured and won't save
please help Tag: computer hang Tag: 6484
Help, not working!
Hi I've just installed Moviemaker 2, but when I try to
start it, I get the following error:
"Windows Movie Maker cannot be used because the required
audio hardware cannot be found on your computer."
What does that mean? What do I need?? Help! Tag: computer hang Tag: 6482
Video Quality is horrible. What can I do ?
Hello all,
I am new to the world of video editing. I have a Sony Mini DV camcorder
that I have been using for a while now. When I watch videos directly from
the Mini DV on my TV the video is great. No jaggies or anything. I
captured some video using the DV-AVI (NTSC) settings in WMM. I added a
Title, some scene transitions, and credits. I saved it to my hard drive as
DV-AVI. Now when I watch it in Windows Media Player the video looks
horrible. There are jagged lines all over. Especially when a lighter color
meets with a darker. What am I doing wrong here ? Since these are all
digital files I am working with I don't see how I could lose quality. I
have VHS tapes that look better than what I have as the outcome of capturing
and editing this current video. Am I doing something wrong or is this just
the current state of amateur video editing ? Would I get better quality
results using something like Adobe Premier instead ? I wanted to put this
on a DVD, but the current quality of the video wouldn't be worth it.
Any ideas,
Duke Tag: computer hang Tag: 6464
the ever frustrating audio
alright, i have only recently been using wmm, but have
figured it out quite well on my own. my big issue right
now is for one of my movies. i imported the video and all
and started it but what i want to do is have parts of the
dialouge playing at certain times and the rest of the time
have a certain song overriding all other sound. now i
know how to put the song in and mute the clips, but it
seems as though i can only either choose to have the song
play or the original video's audio. but i want both..if i
am making any sense and if there is anyway to do what i
want to do with this, someone please help! thanks. Tag: computer hang Tag: 6459
Split Audio from Video?
Does anyone know if there's any way for you to split the
audio away from the video in moviemaker? So that you have
a file of the audio separate from the video. Thanks. Tag: computer hang Tag: 6457
compressing files
Does anyone know how to compress movie files in DV-AVI
format to smaller size. I have a 880 mb movie and I need
it to be around 600.
Thanks Tag: computer hang Tag: 6446
converting .mov file to 'generic' video file
I have a quicktime (.mov) file that I would like to
edit. How do I convert it to a file that moviemaker will
accept (maybe a .mpg file?)? Tag: computer hang Tag: 6444
device can't operate
Hello,
In trying to use Movie Maker, the message stating device
not opperating and close other applications appears. How
do I get beyond this? Tag: computer hang Tag: 6439
Movie Maker won't recognize capture device
Hi,
I have a Matrox analog capture device connected to my
PC. I want to make student projects into a DVD. I can
get Adobe Premiere to capture the video but Movie Maker 2
won't give me the option to change the input. I go to
capture video and it says that it doesn't recognize my
capture device. Please help...
Thanx Tag: computer hang Tag: 6438
WMV to DVD problems
hi,
I read that I needed sonic DVD to create DVD movies from my WMV files. Well
this is a well and good but it is giving me an error saying that I am trying
to ad NTSC video to a PAL project, this is very annoying as these are home
clips of my kids etc
is there no app that just reads wmv and allows dvd creation ?
David Tag: computer hang Tag: 6434
Upgrade Problems
hi i have been using movie maker 2 for a while now and
have found it great and had no problem's apart from it
being a little slow. just today infact i got my pc
upgraded to 512mb ram (from 256mb ram) and a new GeForce4
128mb graphics card and when i got my pc back from the
shop and ran movie maker 2 it loaded my project fine and
i clicked play, i had sound from my music and video clips
and the time line was moving but there was no video just
a black in the preveiw box. also i cant play any video
clips in my collections folder in mm2.
what can i do to get my video back? Tag: computer hang Tag: 6433
music and original audio?
alright, i have only recently been using wmm, but have
figured it out quite well on my own. my big issue right
now is for one of my movies. i imported the video and all
and started it but what i want to do is have parts of the
dialouge playing at certain times and the rest of the time
have a certain song overriding all other sound. now i
know how to put the song in and mute the clips, but it
seems as though i can only either choose to have the song
play or the original video's audio. but i want both..if i
am making any sense and if there is anyway to do what i
want to do with this, someone please help! thanks. Tag: computer hang Tag: 6430
SHUTS OFF
i go to edit movie and then i click on...make titles or
credits...and i put in the title i want and right befor i
can type anthing els movie maker close down on
me...everything els i working for me..but this Tag: computer hang Tag: 6426
Moviemaker project file format
Hi,
Does anyone know the format of a WMM file?
My purpose is to create a WMM project file with other editor and load the
file into WMM to process.
I found there is an article on Microsoft's website shows how to create a
custom effect and transition but a could not find any information about a
WMM project file format.
I can make a Adobe Premier project file with a Notepad. So, I think that
there may be a similar way for a WMM project file.
Many thanks,
Rob Tag: computer hang Tag: 6422
burning movie maker to CD
I have just created a slide presentation using movie
maker. It runs fine on my computer, but when I burn it to
a cd the slide presentation stops but the music keeps
playing on. The slides do not always stop at the same
point, example one time at 5 minutes and 30 seconds, the
next time 10 minutes. Can any one help suggest a fix for
this type of problem. My system is 5 months old. Tag: computer hang Tag: 6420
DV playback error
Dear .....
Having problems with DV playback (MovieMaker2 & Adobe Premiere 6.5),
getting message:
Adobe was unable to connect to the native Microsoft (TM) DV support. This
setting was designed to only work with an OHCI IEEE 1394 (Firewire/Link)
card with an approved Microsoft DV driver...... Playback performance will be
impacted.
In MM2 it will not play back to camera and receive no error message, before
it stops.
My pc is an P4 - 1800 with SiS P4S5A with 1394 FireWire PCI adapter Western
and running (at the moment) XP Home Sp1 express + full update.
Had no problems before with capture card. But after I installed Sp 1 and
other updates from Microsoft Update in early summer this problem started.
It is able to capture, edit and save file to the disk, but unable to
playback to video camera. Have tried uninstalling scanner, moved capture
card from one PCI slot to another, but
error message comes up each time. To me it looks like there is something
wrong with the XP's driver on the 1394 card and/or how XP set up its IRQ
Have been in contact with the dealer, where I bougt the computer. They told
me to reinstall XP system. I have reinstalled from the XP cd and updated
from the internet at least 7 times, without any luck.
Help. Tag: computer hang Tag: 6419
Upgrading To MM2
For some reason after I downloaded and installed MM2 it
didn't seem to make any changes on my computer. When I
start MM it still is MM1 not MM2. I have restarted my
computer and went through all of the installation. I
didn't think I could mess this up but I still only have
MM1. Please help me out with this stupid problem. Tag: computer hang Tag: 6398
Home movies wont play on xbox
I've made a number of sample home movies in an effort to figure out the best
format to use for playing the DVD home movie on my Xbox, however, no matter
what I do, the Xbox doesn't recognize the DVD. I'm using +R DVDs and WinXP
sp1. Any ideas?
Thanks.
--
moondaddy@nospam.com Tag: computer hang Tag: 6393
getting movie maker to save in a VCD format
I would like to know how to save my movies in windows
movie maker in a format which will enable me to view them
on my DVD player. I was thinking maby VCD. Someone please
reply urgantly. Tag: computer hang Tag: 6389
File is not indexed
Hello experts, I just imported over 700MB of video from
my camcorder and after the capture and creating file
process, WMM hung for 15 minutes until I checked the
status in Task Manager and saw "Not Responding".
Thinking that the video was ok, I ended WMM. When I tried
to play it through WMP, it would play but I couldn't fast
forward to check it out because it kept returning to the
place it was at when it was playing. I then opened WMM
and tried to import it, and got "Cannot import file: the
file is not indexed." So, is there a way to finish my
video or do I have to start from scratch?
Thank you. Tag: computer hang Tag: 6385
Vanishing Movie Maker
I reinstalled movie maker, windows xp pro, tried
eveything I can think of and every time I try to use an
effect/transition/title in movie maker 2 it vanishes from
the screen. I can see this is happening to others out
there too. How's about some help microsoft? anyone? Tag: computer hang Tag: 6384
Problem importing mpeg into Movie Maker 2.0
Dear all,
Recently, when I import mpeg files into Windows Movie
Maker 2.0 or MS Producer for Powerpoint 2003 and then
drag the video clip to the timeline, only the audio track
appeared there. When I play the video, no video is played
in the Video Preview window. Instead, a pop-up windows
named "Active Movie" will take control and play the video
outside. I guess some plug-in related to MPEG in the
Windows XP is missing because videos with avi or wmv
format play normally in the above application.
Can anybody have similar experience or find any solution?
Thanks.
Eddie Tag: computer hang Tag: 6378
Where did my effects and transitions go????
I've used Windows Movie Maker 2 for quite some time and
suddenly all the effects except slow down and speed up
and all the trasitions are gone! I've got Plus Digital
Media Editon and I've reinstalled Plus and Win Movie
Makeer and it still is missing all the transitions and
effects. Can anyone please help?
Thanks you! Tag: computer hang Tag: 6377
Video Capture card
Complete novice...have nvidia geforce 4mx 460 graphics
card. Tried to capture analogue to movie maker, result
jerky and fuzzy. Do I need a capture card or is the
nvidia thingy the same thing. Went to PC World for advice
and they've tried to sell me a Roxio photo editing suite -
NOT sure I spoke to the brightest spark on the planet.
Help - totally confused Tag: computer hang Tag: 6371
WMM2 & AverTV Studio
Help, please!!!
My AverTV Studio Capture device is not listed in Video
Capture vizard: "Avalable devices"!!!
Why?! Is it normal situation? Does it mean that I can not
capture analoge video using WMM2?
All necessary drivers are shurely installed.
It is really strange! AverTV Studio 203 is listed among
devices "desined for WinXP". Is it wrong?
Thank you in advance.
Alex Tag: computer hang Tag: 6368
Mono in, stereo out. Multiple sound levels - how to smooth out
The sound capture from our analogue camcorder seems to be mono (left speaker
only).
Is this a capture problem? Is there some way to get it to play in both
speakers?
Also, any advise about how to adjust sound levels from various sorces so
that the overall level is uniform? Tag: computer hang Tag: 6367
Audio out of sync
We use ATI's All-in-Wonder 7500 to capture video and audio from an analogue
camera. This worked fne with the Ulead software that came with the card. But
when we use MM2, the sound lacks behind the video. Any ideas why this
happens, how it can becorrected? Tag: computer hang Tag: 6366
FAST HONEST MONEY
Make 100,000 dollars in 10 weeks, honest to god
Posted by JOE on FRIDAY, October 17 2003, at 10:09 p.m.
I found this on a bulletin board and decided to try it. A little while back, I was browsing through newsgroups, just like you are now, and came across an article similar to this that said you could make thousands of dollars within weeks with only an initial investment of $6.00! So I thought, Yeah right, this must be a scam, but like most of us, I was curious, so I kept reading. Anyway, it said that you send $1.00 to each of the 6 names and address stated in the article. You then place your own name and address in the bottom of the list at #6, and post the article in at least 200 newsgroups. There are thousands) No catch, that was it. So after thinking it over, and talking to a few people first, I thought about trying it. I figured: what have I got to lose except 6 stamps and $6.00, right? Then I invested the measly $6.00.Well GUESS WHAT!!... Within 7 days, I started getting money in the mail! I was shocked! I figured it would end soon, but the money just kept coming in. In my first week, I made about $25.00. By the end of the second week I had made a total of over $1,000.00! In the third week I had over $10,000.00 and it?s still growing. This is now my fourth week and I have made a total of just over $42,000.00 and it?s still coming in rapidly. It?s certainly worth $6.00, and 6 stamps, I have spent more than that on the lottery!! Let me tell you how this works and most importantly, why it works....Also, make sure you print a copy of this article NOW, so you can get the information off of it as you need it. I promise you that if you follow the directions exactly, that you will start making more money than you thought possible by doing something so easy!Suggestion: Read this entire message carefully! (Print it out or download it.) Follow the simple directions and watch the money come in! It?s easy. It?s legal. And, your investment is only $6.00 (Plus postage) IMPORTANT: This is not a rip-off it is not indecent it is not illegal and it is virtually no risk - it really works!!!! If all of the following instructions
are adhered to, you will receive extraordinary dividends.PLEASE NOTE: Please follow these directions EXACTLY, and $50,000 or more can be yours in 20 to 60 days. This program remains successful because of the honesty and integrity of the participants. Please continue its success by carefully adhering to the instructions. You will now become part of the Mail Order business. In this business your product is not solid and tangible, it?s a service. You are in the business of developing Mailing Lists. Many large corporations are happy to pay big bucks for quality lists. However, the money made from the mailing lists is secondary to the income which is made from people like you and me asking to be included in that list.Here are the 4 easy steps to success:STEP 1: Get 6 separate pieces of paper and write the following on each piece of paperPLEASE PUT ME ON YOUR MAILING LIST. Now get 6 US $1.00 bills and place ONE inside EACH of the 6 pieces of paper so the bill will not be seen through the envelope (to prevent thievery). Next, place one paper in each of the 6 envelopes and seal them. You should now have 6 sealed envelopes, each with a piece of paper stating the above phrase, your name and address, and a $1.00 bill. What you are doing is creating a service. THIS IS ABSOLUTELY LEGAL! You are requesting a legitimate service and you are paying for it! Like most of us I was a little skeptical and a little worried about the legal aspects of it all. So I checked it out with the U.S. Post Office (1-800-725-2161) and they confirmed that it is indeed legal! Mail the 6 envelopes to the following addresses:
#1) Stephanie Hicks 1283 Evening Canyon Henderson NV 89014
#2) Matt Madracki P.O. Box 1529 Sutton West, Ontario L0E 1R0
#3)Michael Miller 5229 Cornell El Paso TX 79924
#4)DeeJay Jones 3113 Floyd Dr. #A Augusta GA, 30906
#5)Larry Leas 401 West Hampton Dr. Indianapolis,IN 46208
#6)Joseph Austin Chasar 2125 West 96 Street Cleveland Ohio 44102
STEP 2: Now take the #1 name off the list that you see above, move the other names up (6 becomes 5, 5 becomes 4, etc...) and add YOUR Name as number 6 on the list. STEP 3: Change anything you need to, but try to keep this article as close to original as possible. Now, post your amended article to at least 200 newsgroups. (I think there are close to 24,000 groups) All you need is 200, but remember, the more you post, the more money you make! This is perfectly legal! If you have any doubts, refer to Title 18 Sec. 1302 & 1341 of the Postal lottery laws. Keep a copy of these steps for yourself and, whenever you need money, you can use it again, and again.PLEASE REMEMBER that this program remains successful because of the honesty and integrity of the participants and by their carefully adhering to the directions. Look at it this way. If you are of integrity, the program will continue and the money that so many others have received will come your way.
NOTE: You may want to retain every name and address sent to you, either on a computer or hard copy and keep the notes people send you. This VERIFIES that you are truly providing a service. (Also, it might be a good idea to wrap the $1 bill in dark paper to reduce the risk of mail theft.) So, as each post is downloaded and the directions carefully followed, six members will be reimbursed for their participation as a List Developer with one dollar each. Your name will move up the list geometrically so that when your name reaches the #1 position you will be receiving thousands of dollars in CASH!!! What an opportunity for only $6.00 ($1.00 for each of the first six people listed above) Send it now, add your own name to the list and you?re in business!
---DIRECTIONS ----- FOR HOW TO POST TO NEWSGROUPS----------
Step 1) You do not need to re-type this entire letter to do your own posting. Simply put your cursor at the beginning of this letter and drag your cursor to the bottom of this document, and select ?copy? from the edit menu. This will copy the entire letter into the computer?s memory. Step 2) Open a blank ?notepad? file and place your cursor at the top of the blank page. From the ?edit? menu select ?paste?. This will paste a copy of the letter into notepad so that you can add your name to the list. Step 3) Save your new notepad file as a .txt file. If you want to do your postings in different settings, you?ll always have this file to go back to. Step 4) Use Netscape or Internet explorer and try searching for various newsgroups (on-line forums, message boards, chat sites, discussions.) Step 5) Visit these message boards and post this article as a new message by highlighting the text of this letter and selecting paste from the edit menu. Fill in the Subject, this will be the header that everyone sees as they scroll through the list of postings in a particular group, click the post message button. You?re done with your first one! Congratulations...THAT?S IT! All you have to do is jump to different newsgroups and post away, after you get the hang of it, it will take about 30 seconds for each newsgroup! **REMEMBER, THE MORE NEWSGROUPS YOU POST IN, THE MORE MONEY YOU WILL MAKE!! BUT YOU HAVE TO POST A MINIMUM OF 200** That?s it! You will begin receiving money from around the world within days! You may eventually want to rent a P.O.Box due to the large amount of mail you will receive. If you wish to stay anonymous, you can invent a name to use, as long as the postman will deliver it. **JUST MAKE SURE ALL THE ADDRESSES ARE CORRECT.** Now the WHY part: Out of 200 postings, say I receive only 5 replies (a very low example). So then I made $5.00 with my name at #6 on the letter. Now, each of the 5 persons who just sent me $1.00 make the MINIMUM 200 postings, each with my name at #5 and only 5 persons respond to each of the
original 5, that is another $25.00 for me, now those 25 each make 200 MINIMUM posts with my name at #4 and only 5 replies each, I will bring in an additional $125.00! Now, those 125 persons turn around and post the MINIMUM 200 with my name at #3 and only receive 5 replies each, I will make an additional $626.00! OK, now here is the fun part, each of those 625 persons post a MINIMUM 200 letters with my name at #2 and they each only receive 5 replies, that just made me $3,125.00!!! Those 3,125 persons will all deliver this message to 200 newsgroups with my name at #1 and if still 5 persons per 200 newsgroups react I will receive $15,625,00! With an original investment of only $6.00! AMAZING! When your name is no longer on the list, you just take the latest posting in the newsgroups, and send out another $6.00 to names on the list, putting your name at number 6 again. And start posting again. The thing to remember is: do you realize that thousands of people all over the world are joining the internet and reading these articles everyday?, JUST LIKE YOU are now!! So, can you afford $6.00 and see if it really works?? I think so... People have said, "what if the plan is played out and no one sends you the money? So what! What are the chances of that happening when there are tons of new honest users and new honest people who are joining the internet and newsgroups everyday and are willing to give it a try? Estimates are at 20,000 to 50,000 new users, every day, with thousands of those joining the actual internet. Remember: play FAIRLY and HONESTLY and this will really work.
--
Posted by News Bulk Poster
Unregistered version Tag: computer hang Tag: 6365
moviemaker freezes
HI-
I'm running moviemaker on a Celeron (pentium 3) windows
machine and it freezes regularly during use. I get the
message back from the computer that 'this program is not
responding' and I have to reboot and start over. I
haven't lost any work yet, but it lengthens my work and
frustration. Is there a fix? Tag: computer hang Tag: 6361
Movie Maker major problems
i have been using windows movie maker for a while now and
there are a lot of problems i've been having. when i was
using version 1, there weren't as many problems. there
were certain video files i had that it would import and
split and everything and would let me preview each clip
seperately, but when i put the clips in the the timeline,
when i tried to preview the whole timeline, it wouldn't
do anything. i also had this problem with version 2, but
in version 2, it would crash sometimes and would go
extremely slow when i tried to preview the storyline that
had clips from certain video types. (i've also had the
problem of not being able to view the storyline with
adobe premiere). anybody know how to fix this
problem...or know another program that automatically
splits the video for you? i like that option a lot in
WMM. Tag: computer hang Tag: 6360
Movie Maker to DV camera
When downloading my Movie to my Digital Video camera,
video/audio randomly breaks up (1 sec. - 5 sec.intervals)
Several attempts........driving me mad!
help? Tag: computer hang Tag: 6352
scrolling text in movies
Is it possible to have scrolling text as a portion of the
movie? I know how to add credits, titles etc. but these
features limit the amount of characters one can use. The
text I want to enter is aproximately 3 paragraphs long.
Any suggestions? Tag: computer hang Tag: 6338
exporting speed compared to other movie editing software
I am a Mac user at school and PC at home. I use imove
and love the ease, but wanted to try MM2 for home. I
have scanned 200 pictures and have been making a slide
show for my grandmother's 90th. I find MM2 fairly
comparable to imovie until it is time to export to DV.
It takes forever! Or am I doing something wrong? A 20
min. movie took @ 40 min to get back on to the DV??? Why?
In imovie the export just takes as long as the movie. Has
anyone used another movie editing program that they feel
is better than MM2??
Thank you to everyone, I find this resourse extremely
valuable:)
Abbie Tag: computer hang Tag: 6337
Wade and Oliver-audio skipping
Thanks for the Qu Wade, I was having the same problem and
about ready to chuck MM2! Oliver Thank you for the
suggestion it worked and did not change the quality of
the Movie:) Tag: computer hang Tag: 6335
Yes - I have installed other...
I did not try the Movie Maker with the system in a virgin
state - I had already installed DTP software
(Illustrator/Photoshop/FreeHand/Corel), Games (BF'42,
Medal-Honor, MS-CFS-3) and 3 other video apps
(VideoFactory 1.0, Pinnacle 8se, Ulead Video Studio 5 and
a Adobe tryout for Premiere. Also I had OEM-Preinstalls
for the Intervideo WinDVD apps. I wanted to check the
interface of XP's Movie-Maker out of curiosity and
potential ease for making "quickee web videos" for
emailing. Tag: computer hang Tag: 6332
i like to kown why every time i try to copy (burn) a disc
it will half way through hang and i had to choice to shut
down by force can any one tell me why ??????
See the Problem Solving section of www.papajohn.org
"bernard yap" <chyap@first-engr.com.sg> wrote in message
news:03ba01c39c45$28955e60$a601280a@phx.gbl...
> i like to kown why every time i try to copy (burn) a disc
> it will half way through hang and i had to choice to shut
> down by force can any one tell me why ??????