Skipping Audio & Video

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - How do you convert DVR-MS? I have been looking all over, since ms doesn't support the new format. I have tried using the programs off of TGB and they do not work at all. Probably to show off. I just want to convert dvr-ms to mpeg files. There HAS to be a way (free preferably). Tag: Skipping Audio & Video Tag: 32008
  - 2
    - WMM 2.1 saved file for the web is not found. When creating a file for the web and then selecting DSL the program converts and saves, and indicates it has been saved successfully. on looking for the saved file it doesn't exist. It should hve bee saved as a WMV to use on the web. anyone know why it was not saved? Wat can I do to make it save or how can I findout why it didn't save. I've tried many times to get it to save, which it will say it did but no file is found. -- Gene Tag: Skipping Audio & Video Tag: 32007
  - 3
    - Transition Maker 2 Patrick has spend many months developing a newer, better version 2 of Transition Maker 2 (not that there was anything found wrong with version 1)... it's now available for download... a free upgrade for those who have version 1.... and a 7 day free trial version for those who haven't tried it. Use the link on the main page of my website to get to the TM2 download page. The default installation will be to a different folder than version 1, and you can run both versions on your computer. Your TM2 project files are fully compatible with both versions. I'll be putting out more info about it over the weekend and updating the website online tutorial. -- PapaJohn Movie Maker 2 and Photo Story 3 - www.papajohn.org Photo Story 2 - www.photostory.papajohn.org . Tag: Skipping Audio & Video Tag: 32006
  - 4
    - Audio file length When I add and MP3 file to the audio track of my edited video even though the mp3 is 3min20secs long it shows in the timeline as over 7mins long. The wave form on the time line ends at 3min 20secs so I can cut it back but it is pretty annoying. Does anyone know what causes this and if it can be corrected. Tag: Skipping Audio & Video Tag: 31995
  - 5
    - weird codec issue I have an AVI encoded in XVID that I want to convert to .wmv using moviemaker. I can view this file in WMP so clearly I have the play codec. When I try and import that video into MM2.1 it says I don't have the codec. Confused... ~d d Tag: Skipping Audio & Video Tag: 31992
  - 6
    - Editing Video and Audio Is there anyway to add a second video line in the timeline when editting - so you can transition your video from the main piece with audio - to just some video of other things over the audio from the main clip - in other words - is there a way to separate the audio and the video. Also - I tried to get a piece of video to speed up - but it doesn't show that way when I play it in the timeline - how come? Thanks! Ted Tag: Skipping Audio & Video Tag: 31989
  - 7
    - removing and replacing scenes ,, keeping original sound track Good Day Need some urgent help please. I am busy editing a video (shot on 2 different dv cameras). I have started with the main camera (45 minutes) , and I have also put the second camera's footage on the time-line. I have dragged the video on to the music line ,, in order to be able to cut out scenes from first camera and replace with scenes from another camera ,, thereby keeping the original sound. I am having major problems in trying to replace exactly the same amount . For example I have removed a scene of 3:14 (3 seconds, 14) . On the other footage the closest I can get is 3:12. I have tried for hours. No matter what it is always .2 of a second out . In order to have the sound synchronized ,, I have to take out and replace exactly the same amount of video .. On the one the scene starts at 5:33.12 and end at 5:36:26 yet on the other it ends on 5:36:24 etc etc Awaiting your expert comments please ... Harold Johannesburg South Africa Tag: Skipping Audio & Video Tag: 31988
  - 8
    - My camera (Sony DSC-M1) creates "movies" using MPEG4 - I'd like to I'd like to use them in movie maker to create movies - is this possible? The posts I searched all seemed like it wouldn't work. Tag: Skipping Audio & Video Tag: 31987
  - 9
    - Video capture in DV AVI I have captured a short movie and when I played it back on the timeline the clips were slightly distorted when played. I rendered the movie to my computer and everything appeared fine. Is this normal ? Tag: Skipping Audio & Video Tag: 31986
  - 10
    - WMM2.1 When creating a file for the web and then selecting DSL the program converts and saves, and indicates it is saved succesfully. But I cannot find the saved file. I've repeated this several time but each time I cannot find the saved file. It should have been saved as a WMV to use on the web. I do not select the Microsoft suggested sites. Why is it not being saved even though it said it's been saved. Please help -- Gene Tag: Skipping Audio & Video Tag: 31985
  - 11
    - Audio from one clip with video from another! Is there any way to combine the audio from one video clip with the video from another? I want to overlay the audio from one clip with a title clip. BUT, the key is I don't want it in the "Audio/Music" line because I want to keep the music going. Know what I mean? Everytime I try it, the audio jumps to the "Audio/Music" line and interrupts the music. Any help would be appreciated. Thanks! Rachel Tag: Skipping Audio & Video Tag: 31984
  - 12
    - AUDIO / VIDEO SEPARATION I am in the process of turning camcorder video into a movie. I would like to SEPARATE the audio and video. Is there a way to do so? Tag: Skipping Audio & Video Tag: 31983
  - 13
    - Embedding clips How do you deliberately embed one clip inside the other? I've actually done this accidentally when fiddling with some of my clips and their effects, but I can't figure out how to do it on purpose.lol Thanks. Rachel Tag: Skipping Audio & Video Tag: 31978
  - 14
    - Why can't I import my MPEg4 file? I keep on getting the following error message! C:\Documents and Settings\Gary\My Documents\My Videos\Melville Castle.mpg could not be imported. An interface has too many methods to fire events from Tag: Skipping Audio & Video Tag: 31975
  - 15
    - HP dc5000 not recognized as Video Capture Device I have a VCR connected to my hp dvd movie writer dc5000 connected to my WinXP SP2 PC. VCR connected via s-video and audio (red & white). I can capture video & audio through the dc5000 with the ArcSoft ShowBiz software that came with the dc5000. I can capture video (no audio yet) through the dc5000 with Roxio Easy Media Creator 7. However, the dc5000 is not recognized as a Video Capture Device in Windows Movie Maker 2.1. >> How can I make sure Movie Maker recognizes the dc5000 device? << Tag: Skipping Audio & Video Tag: 31974
  - 16
    - Tip: Scan an Old Book Here's a new sample story - using an old book, a scanner.... and PS3.... and the neptune service. http://papajohn.neptune.com?selectedalbum=papajohn118478 -- PapaJohn Movie Maker 2 and Photo Story 3 - www.papajohn.org Photo Story 2 - www.photostory.papajohn.org PS... the heat and light of a scanning process can harm old paper... take appropriate care. . Tag: Skipping Audio & Video Tag: 31973
  - 17
    - Tip: New DVD Plug-in for Photo Story 3 Sonic Solutions released a DVD Plug-in for Photo Story 3. http://estore.sonic.com/enu/photostory/default.asp?lang=enu&rd=22782&MailID=msphoto2160501&MID= ... available in all photo story languages. The cost for the download: $19.99 The DVD Burn options become available from the save area of the Photo Story menu. -- PapaJohn Movie Maker 2 and Photo Story 3 - www.papajohn.org Photo Story 2 - www.photostory.papajohn.org . Tag: Skipping Audio & Video Tag: 31972
  - 18
    - no video capture ok,kids,I've seen this one before.I have a vaio pcvrs720g, brand new,jvc grd33us vid cam.Using wmm,u-lead ,dvgate,nero6,or roxio I get the same thing.Computer recognizes cam,any software will operate cam functions,up to and including capture.But,will not capture video.Different error messages with different softwares,but all basically say:no video capture,check source and computer configuration.Have connected with firewire and i-link cables and ports,same result.Have my old dell computer,it works fine.(just too slow).Camera even starts,shows vid on cam view screen,but nothing in preview window on computer,no counter action,and no capture.Anyone got a clue.By the way,talked to Sony,said it's under warranty,ship it to repair station.Biiig help! Thanks. -- ludingtont Tag: Skipping Audio & Video Tag: 31971
  - 19
    - "insufficient memory" error when saving While editing various video clips I ran into this "insufficient memory" error when trying to save my project. I don't know why I'm getting this message, and if it refers to my RAM or hard drive space. I have a gig of RAM and well over 25 gigs of storage on my hard drive, so I don't understand how it's insufficient. With movie maker open, the computer is only using about 550mb of RAM. Any ideas as to what it might mean, and how to fix it? Tag: Skipping Audio & Video Tag: 31964
  - 20
    - how to copy clip from dvd I have copyright permission to copy clips from an existing DVD into a movie maker presentation for a history project. But I can't figure out how to import the clip from the D drive to my project. This is my first time using movie maker. Tag: Skipping Audio & Video Tag: 31962
  - 21
    - Inverting video The easiest place to mount my camcorder in my race car (which is what I bought it for) means that it would be upside down... So ... do I get a separate bullet cam (and I bought a camera with an analogue input specifically for this), or is there a way of inverting the footage? -- "The road to Paradise is through Intercourse." [email me at huge [at] huge [dot] org [dot] uk] Tag: Skipping Audio & Video Tag: 31961
  - 22
    - Error during Import video or picture. How to solve problem on importing video or picture in movie maker. The error message is ".mpeg could not be imported. Unspecified error". Pls help. Thank you Tag: Skipping Audio & Video Tag: 31959
  - 23
    - Black video screen in Movie Maker 2.1.4026.0 / Windows XP Pro SP2 I was using Movie Maker to create videos and it is now displaying just black in the video window and maxing out CPU. Any ideas? Tag: Skipping Audio & Video Tag: 31957
  - 24
    - converting wmm files to powerpoint I can't play an edited windows movie maker in windows media player or get it into my powerpoint presentation. Someone please let me know how to do this. thanx Tag: Skipping Audio & Video Tag: 31947
  - 25
    - Capture to clips Hi I run the wizard to capture manually from a camara. I start and stop recording several times before hitting the finish button. The result is only one clip. Any idea of why. MM must have all the info it needs to create the clips ( yes the create clips check is active ). This happens since ver. 2.1 was installed. Thanx Tag: Skipping Audio & Video Tag: 31946
- Next
  - 1
    - AAC format compatability with MM Will I ever be able to use songs in AAC format? Movie Maker only excepts MP3? Is that correct or will I have to re-rip my collection of 4000 songs? Help? Tag: Skipping Audio & Video Tag: 31940
  - 2
    - Will Movie Maker ever allow me to move my songs in AAC over for us I can't use my songs ripped in iTunes (AAC format) to movie maker. I like movie maker, but my entire collection is AAC. Will there ever be compatability? Tag: Skipping Audio & Video Tag: 31939
  - 3
    - Stripping audio from imported video How do I remove the audio from imported video so I can replace it with my own soundtrack? At the moment, I'm getting both the music and the wind noise from the camera, which isn't quite what I intended. -- "The road to Paradise is through Intercourse." [email me at huge [at] huge [dot] org [dot] uk] Tag: Skipping Audio & Video Tag: 31938
  - 4
    - Title positioning Does anybody know a possibility to position the titles (on the lower part or in corners of the screen)? Tag: Skipping Audio & Video Tag: 31937
  - 5
    - chopping a bit off the end of a video If I recorded a .wmv using MM2.1 and then imported that file back into MM2.1 and split off the last minute of the video and saved the result using exactly the same video profile. Am I right in assuming that there would be no loss of quality whatsoever because the program would be intelligent enough to spot that it's simply doing a trim operation and doesn't need to re-encode (and degrade the quality further) ? I'm tempted to think this isn't the case because doing this operation can take 20 minutes on a 30 minute video recorded (and being re-saved) at 500kbps. If it was being intelligent it would simply figure out where to truncate the file. ~dd Tag: Skipping Audio & Video Tag: 31928
  - 6
    - wmv versions produced? Hi, I've been recording shows using MovieMaker for a couple of years. The last few months using version 2.1 of MM and previously version 2.0. Before that I used Windows Media Encoder 7 and then 8. I'm now looking at getting a portable media center and need to know the exact version of the files I've made. I don't know if they're wmv7, 8, 9 or 10. Am I right in assuming the following: WME7 makes wmv7 WME8 makes wmv8 MM2.0 makes wmv9 MM2.1 makes wmv10 That info will help me in my buying choice... thanks... ~dd Tag: Skipping Audio & Video Tag: 31927
  - 7
    - YIKES..sorry for the double post ! Sorry.. MSN said the first message did not go so I did it again.. thanks.. jan Tag: Skipping Audio & Video Tag: 31926
  - 8
    - Recording my project problems I need help also! I've only been using MovieMaker a short while, but seemed to have a good idea what was going on. I made a few movies from pictures that I uploaded from my pc and turned into movies with music. However, now I am using the same photos and same music but am unable to record to CD. The project records the first 2/3 of the movie just fine, but during the last 1/3 of the movie the screen goes black with no pictures. The music continues to play just no pictures. It plays fine when re-playing in MovieMaker, it just won't record. I've changed brands of CDs but am incurring the same issues. Any suggestions? Jan Tag: Skipping Audio & Video Tag: 31925
  - 9
    - Problems saving to CD I need help also! I've only been using MovieMaker a short while, but seemed to have a handle on it when making the first couple of movies. I have uploaded my own pictures into the collection. However, now, when I record onto CD the last third of the pictures aren't recording. The first of the video is great, then suddenly the screen goes black. The music continues to play, but no video. The movie plays fine while in MovieMaker, but it won't record onto CD. Any suggestions? Jan Tag: Skipping Audio & Video Tag: 31924
  - 10
    - saving to CD Help please. I am trying to save my project and it keeps telling me "WMM can not save to location. Verify the original source files used in movie are available, and the saving location is still available" What does this mean? I am trying to save on a CD and then later transfer to a DVD program. Any help would be greatly appreciated Holly Tag: Skipping Audio & Video Tag: 31909
  - 11
    - frequent crashing Frequently when using Windows Movie Maker I get the message "Windows Movie Maker has encountered a problem and needs to close." I think reinstalling may be the solution, but I don't know how to do that since it's automatically downloaded with SP2. Any ideas how to correct this problem? Tag: Skipping Audio & Video Tag: 31908
  - 12
    - Wont play or edit files, or save. I've been having the same exact problem that has been posted before: "TW Cool" wrote: > OK, I think this happened after installing some updates to Windows, but now > whenever I go and import movie files into Windows Movie Maker, I can't play > the files. The video doesnt load over to the right side preview window. So I > cant edit the video. There were no answers as to how to fix this problem, has anyone came up with any answers for this yet? I am using movie maker v2.1 and my computer is up to date, I think it got messed up after a windows update/ when 2.1 was installed- but I have no idea as I havent used movie maker in quite awhile and just realized it is broken now. Tag: Skipping Audio & Video Tag: 31907
  - 13
    - audio not working My movie is finished except for the audio, I Have imported and placed the song of my choice in the timeline but when I click play no sound is heard. Am I missing a step? While it is playing, if I click on a random part of the movie or clip, I will then hear sound but it won't work from the very beginning when I push play. Tag: Skipping Audio & Video Tag: 31906
  - 14
    - no cd in drive I have made a video on my WMM. Pictures, video and audio is on this. I know this was asked before, however, I have tried making a cd, and it goes thru most of the process with wizard. Then I get the message no CD in Drive. I know the cd burner works because I burn other music or videos. That is done from CD to CD, not from computer to CD. Also it asks if I want to save to Computer. If I open up my videos in WMM and I view the collection, doesn't that mean that it is saved in my computer. I also have a program HP memories that is almost the same as WMM and when I want to create a CD in that program the same thing happens. Message no CD in drive. Tag: Skipping Audio & Video Tag: 31904
  - 15
    - Major Capture ERROR When i try to "capture from video device" i get a statment saying my camera may not be on or working properly. I hear the chime every time i turn the camera on or replug my usb but when i try to click 'capture from device' it will not let me... I even paid $5 for a driver onlne for my specific camera but no results. ANy help will be GREATLY appreaciated!!!!! Tag: Skipping Audio & Video Tag: 31903
  - 16
    - showing a movie maker dvd on a large screen for a big group what equipment is needed to show slide show on larger screen? Tag: Skipping Audio & Video Tag: 31902
  - 17
    - PIP Plus Lately I have been working on a new plugin for Movie Maker to allow advanced Picture -in-Picture effects. The plugin now seems stable and working as I intended it for. Therefore I invite those of you who like to tweak things a bit to help me beta test it and provide some feedback. The main features of this new plugin are: * WYSIWYG: Preview and final render shows the same results. * Exact Placement: Place PIP rectangles anywhere in the display area. * Free Movement: The PIP rectangles can be moved around. * Effect and Transition: Use either as Effect on a single image or as Transition between two images. Please note this release is for testing purposes only. You should not use it in any critical projects. This beta plugin will stop working in 15 days time (1 March 2005). After which a new version will be made available. More info and download from: http://www.rehanfx.org/pipplus.htm Best regards. -- Rehan www.rehanfx.org - get transitions and effects for Windows Movie Maker Tag: Skipping Audio & Video Tag: 31900
  - 18
    - Music, narration with still images Can you add narration and music at the same time with still images? Tag: Skipping Audio & Video Tag: 31893
  - 19
    - import music to movies Can someone please tell me why I can purchase music online and then burn cd's but cannot import the very same music to my photo shows and movies because of copyrights. I keep getting a copyright message. What's the deal? Tag: Skipping Audio & Video Tag: 31888
  - 20
    - Need online "manual" for Movie Maker 1.1 I have a 2-yr old Dell that I don't connect to the internet. It has a 1.7Gh P4 processor. I'm hoping I can use the MM 1.1 that is installed w/ WinXP Home to edit video from a new camcorder. So far, I can't find any information on how to use MM 1.1, everything I've found is for the newer version. Can anyone direct me to an online information source? Thanks! Tag: Skipping Audio & Video Tag: 31885
  - 21
    - Adding Background Images? Is there way to change the background in a video in Windows Movie Maker? For example, can I film a video in one location and later edit the video and give it a background as though it was done somewhere else ie. space, the forest etc.? Tag: Skipping Audio & Video Tag: 31884
  - 22
    - DV-AVI (Pal) -- AVI files have no meta-data fields!! I have movies saved in DV-AVI (PAL) because that is the best quality WMM allows for. Unfortunately AVI files do not have any fields for met-data input, nothing editable . How can I add information or fields to AVI files, is there a program available to do that, or something from the group that invented the AVI standard. I have tried putting information in the properties tab in WMM, but this does not show up on the outputted file. I thought about saving the file as a 'High quality video (PAL)', which is WMV (VBR), but this would egrade the quality. So if AVI cannot have fields, why not and how do I convert to WMV lossless? I only want to go to WMV if AVI cannot have fields, why is that, its stupid. Tag: Skipping Audio & Video Tag: 31862
  - 23
    - Audio Compression on Video Edit Trying to edit a .MPG video file that has audio on it. Sounds fine when I play each clip but when I move to timeline and save to .WMV file the audio portion is compressed and runs at 2X+ speed. Video portion is fine. What am I doing wrong? Tag: Skipping Audio & Video Tag: 31858
  - 24
    - dvd label recommendation? does it effect play? Can anyone recommend an affordable label making software for DVD's? More importantely does putting a label on the disk effect the play. I have read reviews of the software where some people say it did. Thanks Tag: Skipping Audio & Video Tag: 31855
  - 25
    - Splitting Finished DV-AVI PRoject So I saved my project to disk, 13 GB , and then used MYDVD to get to a disk. Everything fine so far. But now I want to take my 13gb DV-AVI clip and save it to Multiple DVD's (4.7) with out compressing anymore. Is there a program that will split this into 3 parts, without any parts being dependent on the others. I know I could go into movie maker and trim then convert, then trim again, but I thought there would be an easier way. Thanks! Tag: Skipping Audio & Video Tag: 31854

I captured some video from my camcorder and created a movie with video clips
only (no photos). In attempting to create a movie that can be burned to a
DVD (DV-AVI), the video and audio skip.

Any ideas?
--
Cathy

Top

clips to avi by WSIB1

WSIB1
Sun May 08 14:16:07 CDT 2005

captured lots of clips. how can I convert clips to many avi-s in one step?
--
WSIBis#1

Top

Re: clips to avi by PapaJohn

PapaJohn
Sun May 08 23:24:34 CDT 2005

Movie Maker doesn't have such a feature... you need to do them one at a
time.

--
PapaJohn

Movie Maker 2 and Photo Story 3 - www.papajohn.org
Photo Story 2 - www.photostory.papajohn.org
.
"WSIB#1" <WSIB1@discussions.microsoft.com> wrote in message
news:BEC9D1E7-9F13-4774-817F-792057BB2529@microsoft.com...
> captured lots of clips. how can I convert clips to many avi-s in one step?
> --
> WSIBis#1
>

Top