Show timeline

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Movie maker save stops at 6% I've been trying all sorts of fixes here and Papa John's website, but it doesn't seem to work. Any movie I try to save hangs at 6% (always there for some odd reason). Help anyone? Tag: Show timeline Tag: 9024
  - 2
    - MM2 Website - New 'Thumbnail' Feature My website is sometimes... maybe often... difficult in that it has more words than you need, and is often inconclusive about a particular item as I don't have all the answers. I just started to add more words to make things easier. The first new 'Thumbnails' are on these 3 pages: CD Burning... Introduction Problem Solving... Audio Problem Solving... Video I'll be adding more as the world turns. PapaJohn Tag: Show timeline Tag: 9020
  - 3
    - How Can I change the file extension? I need some help! I had saved several video files of my wedding ceremony to a CD while I was reformatting my computer. Before I had went through with the formatting, I ensured that the files could play off of the CD (to which they could). So I formatted my hard drive, to which all the original files were deleted. Now, I have the files on CD (with file extensions as .MSWMM) and they now won't play on my Movie Maker. PLLLEEAAASE someone help me! In reading other posts, I have read that you need to save the file in .ASI or .wmv or other extensions. How can I convert these saved files to reflect a readable extension so that I can see my videos again? Is it even possible? Please someone respond to this! Thanks. Tag: Show timeline Tag: 9019
  - 4
    - Re-associate media files in MM2 If I have a 14GB media file that is part of an existing MM2 project and I wish to relocate the original media file. When I do that, MM2 just gives me a red X--it doesn't prompt me to tell it where the file has been moved to. Is there any way to do this thanks RobertJ Tag: Show timeline Tag: 9017
  - 5
    - Making a CD I have a Sony DRU-510A Combo Drive.I put a Sony CD-R to record Windows movie but it will not recognize the CD-R. Ian using Windows XP. Could you help me. Tag: Show timeline Tag: 9016
  - 6
    - Herewith MONEY $$$$$ For YOU Don't Cheat I found this on a bulletin board and decided to try it: A little while back, I was browsing through news groups and e-mails, just like you are now, and came across an article similar to this that said you can make thousands of dollars within weeks with only an initial investment of $6.00!! So, I thought, "Yeah right, this must be a scam," but like most of us, I was curious, so I KEPT reading. Anyway, it said that you send $1.00 to each of the six names and addresses stated in the article. You then place your own name and address in the bottom of the list at $6.00, and post the article in at least 200 people 0r news groups. (There are thousands) No catch, that was it. So after thinking it over, and talking to a few people first, I thought about trying it. I figured, "What have I got to lose; except six stamps and $6.00 right, right?" Then I invested the measly $6.00. WELL GUESS WHAT!!! Within seven days, I started getting money in the mail!! I was shocked!! I figured it would end soon, but the money just kept coming in. In my first week, I made about $25.00. By the end of the second week I had made a total of more than $1000.00!! In the third week I had more than $10,000.00 and it's still growing!! This is now my fourth week and I have made a total of $42,000.00 and it's still coming rapidly. It's certainly worth $6.00 and six stamps, and I have spent more than that on the lottery without ever winning!!! Let me tell you how this works and most important, why it works.......... also make sure you print this out NOW, so you can get the information off of it, as you will need it. I promise you that if you follow the directions exactly that you will start making more money than you thought possible by doing something so easy!! Suggestion: Read this entire message carefully!! (Print it out or download it) Follow the simple directions and watch the money come in!! It's easy. It's legal. And, your investment is only $6.00 (Plus postage)!!! IMPORTANT: This is not a rip-off, it is decent; it's legal; and it is virtually no risk - it really works!! If all the following instructions are adhered to, you will receive extraordinary dividends. PLEASE NOTE: Please follow the directions EXACTLY, and $50,000 or more can be yours in 20 to 60 days. This program remains successful because of the honesty and integrity of the participants. Please continue its success by carefully adhering to the instructions. You will now become apart of the Mail Order business. You are in the business of developing Mailing Lists. Many large corporations are happy to pay big bucks for quality lists. However, the money made from the mailing lists is secondary to income, which is made from people like you and me asking to be included in that list. Here are the four easy steps to success. STEP ONE: Get six separate pieces of paper and write the following on each piece of paper "PLEASE PUT ME ON YOUR MAILING LIST." Now get 6 U.S. $1.00 bills and place ONE inside of EACH of the six pieces of paper so the bill will not be seen through the envelope (to prevent thievery). Next, place one paper in each of the six envelopes and seal them. You now should have six sealed envelopes, each with a piece of paper stating the above phrase, your name and address, and a $1.00 bill. What you are doing is creating a service. THIS IS ABSOLUTELY LEGAL!!!!! You are requesting a legitimate service and you are paying for it!! Like most of us I was a little skeptical and little worried about the legal aspects of it all. So I checked it out with the U.S. Post Office (1-800-238-5355) and they confirmed that it is indeed legal!! Mail the six envelopes to the following addresses: 1) Andreas Swart Hoornschediep 11 9727 GA Groningen, The Netherlands 2) W. Edens 4829 Bud Ln Lexington, KY 40514 3) Richie Herminio Block F , Eastgate Office Park 24 South Boulevard, Bruma 2198 P.O.Box 10474 , Johannesburg 2000 4) J. Safian 6950 W. Forest Presrv. Dr., #115 Norridge, IL 60706-1324 5) G. Takla 690 Adelaide Avenue East Oshawa, Ontario, L1G 2A8 6) R. Changule 27 Julius Street Flat N0 2 Cosmopolitan View Lynmeyer Johannesburg 2000 South africa STEP TWO: Now take the #1 name off the list that you see above, move the other names up (six becomes 5, 5 becomes 4, and etc.) and add YOUR NAME as number 6 on the list. STEP THREE: Change anything you need to but try to keep this article as close to original as possible. Now post your amended article to at least 200 news groups. : (I think there are close to 24,000 groups) All you need is 200, but remember, the more you post, the more money you make!! This is perfectly legal!! If you have any doubts, refer to Title 18 Sec. 1302 & 1341 of the Postal Lottery laws. Keep a copy of these steps for yourself and whenever you need money, you can use it again, and again. PLEASE REMEMBER that this program remains successful because of the honesty and integrity of the participants and by their carefully adhering to directions. Look at it this way. If you were of integrity, the program will continue and the money that so many others have received will come your way. NOTE: You may want to retain every name and address sent to you, either on a computer or hard copy and keep the notes people send you. This VERIFIES that you are truly providing a service. (Also, it might be a good idea to wrap the $1 bill in dark paper to reduce the risk of mail theft). So, as each post is downloaded and the directions carefully followed, all members will be reimbursed for their participation as a List Developer with one dollar each. Your name will move up the list geometrically so that when your name reaches the #1 position you will be receiving thousands of dollars in CASH!!! What an opportunity for only $6.00 ($1.00 for each of the first six people listed above) Send it now, add your own name to the list and you're in business!!! *****DIRECTIONS FOR HOW TO POST TO NEWS GROUPS!!!***** STEP ONE: You do not need to re-type this entire letter to do your own posting. Simply put your cursor at the beginning of this letter and drag your cursor to the bottom of this document, and select 'copy' from the edit menu. This will copy the entire letter into the computer's memory. STEP TWO: Open a blank 'notepad' file and place your cursor at the top of the blank page. From the 'edit' menu select 'paste'. This will paste a copy of the letter into the notepad so that you will add your name to the list. STEP THREE: Save your new notepad file as a text file. If you want to do your posting in different settings, you'll always have this file to go back to. STEP FOUR: You can use a program like "postXpert" to post to all the newsgroups at once. You can find this program at <http://www.download.com>. If you don't understand how it works you can email me at: mailto:andreass@orange.nl (this is only when my name is in the list, so send a copy of my address as well. put this in the header: make millions very easy + my full name) Use Netscape or Internet Explorer and try searching for various new groups (on- line forums, message boards, chat sites, discussions.) STEP FIVE: Visit message boards and post this article as a new message by highlighting the text of this letter and selecting paste from the edit menu. Fill in the subject, this will be the header that everyone sees as they scroll through the list of postings in a particular group, click the post message button. You're done. Congratulations!!!!!! THAT'S IT!! All you have to do, and It Really works!!! Best Wishes Tag: Show timeline Tag: 9007
  - 7
    - emm386.exe on XP I have a small DOS based program that was written for me by a local programmer. It makes use of a Microsoft file called emm386.exe. I used Windows 98 2nd edition and this worked well. I have now installed Windows XP, and the programme does not want to work. It comes up with a message "No EMS driver is installed". I need to use more memmory to get the small (2mb) programme to operate. What can I do with XP to activate the equavalent to emm386.exe, and which gives a DOS programme access to memeory in the PC above 1MB I would appreciate any help in solving this problem, as it seems that Microsoft SA dont have answers, or are too inexperienced with this. Kind regards Ralph Sorensen Omni Forest Products cc Tel 012-807 2580 Cell: 082 573 0710 Tag: Show timeline Tag: 9005
  - 8
    - Title not working?! I tried to put a title in. ALl I get is a gray screen. Anyone else encountering this problem? Tag: Show timeline Tag: 9004
  - 9
    - Program Hangs... All, I have just started using MM2 on a new computer. After many hangs and software restarts, I came here. I see I'm not alone. I went to Papa John's site for the fixes and started down the list. I'm wanting to edit a 45 minute video, by this Saturday. This is what I have done so far to no avail... 1) Did a search on divxaf.ax. Not found on my computer. Is this not good? 2) Changed Hardware Acceleration to 3, still locked up. I have Directx 9b installed. 3) The computer has a Nvidia Geforce MX 440 w/ 64 MB DDR Memory. I ran Windows Update for new drivers for it, but nothing there. (The computer came with XP Home. I believe it should look for these types of updates. I have not had a new computer in 5 years, so I have a lot of catching up...) 4) Ran GSpot v2.21. It shows that there were a couple Arcsoft files missing, but seems ok for MM2 5) The tweak for Nvidia/Xp... I was unable to find on the listed site. May have been moved or I was just missing it. I think that is about all...Any help would be greatly appreciated! Regards, Andy Tag: Show timeline Tag: 9003
  - 10
    - 16X9 I have a video clip that is in 16x9 format and when I capture it --- it changes to 4x3 I have found how to save my movie in 16x9 format but do not know how to capture my video that way Help? Tag: Show timeline Tag: 9001
  - 11
    - Cannot make a movie I loaded my movie through 1394 into my laptop and then proceeded to edit it. After I edit it and tried to save it to a disc or my hard drive it continued to say "Cannot Complete the Save Movie Wizrd." Movie Make cannot save the movie to the specified location. Then I copied it through Roxio onto a disc and tried the same on my desktoip and it is copying it now. Any ideas out there as to why on my desktop which is older than my laptop. Tag: Show timeline Tag: 8997
  - 12
    - Having trouble saving? (Found Solution) Having re-read thru the excellent Papa John site.. i then went hunting for QASF.DLL I suggest if your getting a SA MOVIE (error) you visit this link as your first port of call.. and download the file relevant to your O I can happily report my MM2 is working like a treat again. Yippee http://support.microsoft.com/default.aspx?scid=kb;en-us;83041 Tag: Show timeline Tag: 8993
  - 13
    - No device indicated I have a Mini DV and a IX CIU computer with windows xp with movie maker . It came with no instructions and I feel i,m missing something. It says there is no device for video hookup. Could really use some help. Tag: Show timeline Tag: 8991
  - 14
    - REQUIRED: qasf.dll version 9.0 Has anyone got a copy i could have? Tag: Show timeline Tag: 8990
  - 15
    - Upgraded PC, now MM2 will NOT allow SAVING MOVIE Firstly I'd like to take this opportunity to thank Papa John for all his great work and input in this newsgroup and indeed his site. Totally invaluable. My problem, i've been using MM2 effectively since it first launched. My previous PC Spec was P4 1400mhz MMX Gef0rce 4 256 meg ram 2 HDD 180 & 60gig Made loads of films and never had a problem (that I couldn't resolve) Since upgraded to a new Motherboard P4 2600mhz 1 gig DDR Ram ATI Radeon 9800 Pro 256meg MM2 just will not allow me to save as per http://www.eicsoftware.com/pictures/PapaJohn/Website- MM2/MM2.html I'm totally stuffed now. Anyone got any solutions, as i've tried all the ones in the above link. No luck Any one got a work thru, the clock is ticking and I really need to get MM2 working again.. just like the good old days. Tag: Show timeline Tag: 8987
  - 16
    - no device Movie Maker tells me I have no device when I try to run program. Also when I got my computer I did 'nt recive instructions and am tired of going to help to learn more . Any suguestions Tag: Show timeline Tag: 8986
  - 17
    - Sound plays too fast when importing DV When importing my clips with sound (.avi), the sound is not syncronised with the video and is about 100 times too fast. Any help would be greatly appreciated Tag: Show timeline Tag: 8976
  - 18
    - Timing in Moviemaker Hello! I'd like to make a movie with several static images in it. Each static images should be displayed for about 5 seconds? Is this possible with the windows moviemaker? I hope you can help me. Doris Tag: Show timeline Tag: 8973
  - 19
    - the effects for movie maker is not enough the effects for movie maker is not enough.i don't find a lot of effects and trans.for example blaster,raining,lighting etc.please send me if you know how to find them.thank a lot! Tag: Show timeline Tag: 8972
  - 20
    - Final Render Video Stops - Audio Continues I have a project that I cannot seem to make into a movie. I've tried saving to PC, CD, and DV Camera. All indicate a final file size of around 85 meg. Movie is 12:45 (minutes) long I only get errors trying to go to DV camera, but no error reason. Saving to CD or PC, the software proceed normally. When viewing the final movie, video stops, audio continues, at about 50% point. No info in help talks about max file size, etc. Each save gets me a little further. Any suggestions? Tag: Show timeline Tag: 8971
  - 21
    - playing PAL video, Audio sounds like Chipmonks I can't convince my PC to play my home video taken from my Sony Cyber Shot Camera to play back on the StoryBoard like it does in the collections window, or when i play it in windows media play. It sounds like the Chipmonks. I know the videos are in PAL mode, I changed the Options setting to reflect PAL, and i tried NTSC to but i still here Alvin and his buddies. Can someone please help me! My ultimate goal is to convert the videos to NTSC. Thanks Tag: Show timeline Tag: 8966
  - 22
    - compatibility movie maker & media player Why in the name of God can't media player read the video project made with movie maker? I get a message that tells me that media player can't read the kinda file that movie make just made....they are both made by windows. What am i missing??? Tag: Show timeline Tag: 8962
  - 23
    - Blurry photos When I review the video that I made using only photos from my digital camera, my photos are very blurry. It is even worse when I see it in full screen. When you click on the photo to view it on the screen before dragging it down to the timeline it is clear. Is there something that I am doing wrong or do I have a setting incorrect?? Tag: Show timeline Tag: 8961
  - 24
    - Windows I have a Windows Media audio/video file which when I open it in Media Player is 11 mins 3 secs long. But when I import it into WMM, it thinks it's only 16 seconds long. Is there a way to set the properties (or fool WMM) so that I can restore the duration to 11:3, which is right? Tag: Show timeline Tag: 8960
  - 25
    - i can't save project.why? i can't save project.why? and I MAKE IT LIKE HELP FILE Tag: Show timeline Tag: 8959
- Next
  - 1
    - No ones been able to help with this not even Intell ... Intell made my motherboard. It was manufacured in Sept of 2003 ... so it's new ... I'm running a P4 at 3.0 ghz and I have 1 GB of 400 DDR ram. I made a 13 minute slide show using WMM2 and although the final product was a WMV ... (I can't find any way to convert WMV to any other format) ... so I forced Roxio CD/DVD creator 6 basic to author this WMV to burn on a DVD-R ... after what was supposed to be a successful burn (took 45 minutes) I discoverd that I could not view any files on the DVD ... by R-clicking on properties ... and after careful observation I discoverd that I cannot view any files on any disks ...THATS ANY DISK not music, not images, not .exe or program disk ... I can't even do a reinsatll of my OS ... because it says my file system is RAW ...insert a disk ... how can one insert a disk when one is already inserted??? At the roxio forum someone suggested that I was full of ... it and that this could never have happened... intell never hear of it ... my DVD burner company say it's not them ... well anyway I've got 1100 bucks invested in my home built computer and after this failed burn cannot use any of my optical drives ... This RAW file format ... from a search at google suggests it's a non-formated hard drive ... YIKES ... when did my CD-roms become hard drives ... anyway I need some help ... if you can ... please I dont understand how this newgroup thinkg works ... I've been here two hours and hope this will post ...I've spent what seem hours looking but ..sure wish you could search posts for help ... if you've got an answere I really need the HELP ... FalconMcRi@cox.net ... oh ... btw ... I've checked out my DVD burner and my CD-rw and they work fine in my previous computer. Tag: Show timeline Tag: 8958
  - 2
    - partial import syndrome i can import most dv-avi files into MM2 with no problem. however, certain files only get 'partially' imported. case in point; i've captured some footage from my dvcam that's 1.2GB, and lasts 6:20. however, once imported that file is inexplicably reduced to only the first 20 secs! there's no way of adjusting the capture size limit - i've checked. and what's more, i've imported bigger files in the past. what gives??? any help greatly appreciated. Tag: Show timeline Tag: 8956
  - 3
    - divide and conquer I am wondering if it is possible to break up a large video project into smaller sections, edit them as needed and then when each is finished, combine them into the final finished project. Once a particular section is finished, it seems wasteful to have to re-render all that again just to see how the new section is coming along. Thanks, Phil Tag: Show timeline Tag: 8953
  - 4
    - export problems I am having trouble exporting my movie in any fashion. When i try to make a WMV file, or save it to a CD, it fails and then gives me a message: "check to make sure my source files are still availible, the destination location is still available and the destination location has enough space" -not in those words but that is what it says. I can open and play and edit my movie no problem-so the source files are still there and uncorrupted, and I even did a test where i made a project the same lenghth (just cutting and pasting)with the same source materials and it worked! I have a ton of room on my computer too. I am at a loss and desperately need help. thank you very much Tag: Show timeline Tag: 8948
  - 5
    - Making video tape of MM output Can anyone pleass advise how I can save my MM movies to a digital or Super VHS tape. I don't have a camera or VCR with 1394 but do have each with S-Video input. Thanks in advance, Al Gonzales Tag: Show timeline Tag: 8945
  - 6
    - Why does Auto Movie not work The Auto Movie feature seems to create another version of the storyboard without the selected background music and tack it onto the end of the existing storyboard. The Help led me to believe it would add background music and produce a finisked film. Tag: Show timeline Tag: 8943
  - 7
    - Conflict between Movie Maker 2 and WinFax It seems whenever I use Movie Maker I have to re download Direct X 9 in order to restore the Answer Calls as Fax option. I also find that Movie Maker needs a new download of Direct X fairly regularly otherwise the movie audio sounds strange. Tag: Show timeline Tag: 8942
  - 8
    - Ticking sound at clip transition I'm using mm2 to edit DV from my PC101. My finished video sounds fine on my computer. When I save the video back to DV tape on my camera I get a single tick noise at each clip transition. Anyone know what's causing the tick? thanks, Jeff Tag: Show timeline Tag: 8936
  - 9
    - "is not a valid date" When I changed the page to type a message ,I got a warning window-lexplorer "is not a valid date".If you don`t clear it you are locked up,don`t have a clue.HELP! Tag: Show timeline Tag: 8933
  - 10
    - Video effects dont work, please help. If i add "icrease brightness" to a clip the app just switches off. No history of it or anything. I am stumped. Please advise. Tag: Show timeline Tag: 8930
  - 11
    - MM2 limit on number of slides? I tried to create a movie with about 800 slides (~40 minutes with 5 sec/slide and transitions). I have a fast machine (2.8Ghz hyperthreaded P4, 1GB RAM, 200GB disk, 3GB swap), but once I added the transitions and music, MM2 slowed to a crawl. In an attempt to make it more reasonable, I split it into two shows of about 400 slides each. It helped, but not much. But here's real problem #1. When I tried to save the movie as avi, I got a "not enough disk space" message even though I have scads of available space and the swap is distributed across physical disks. I was able to save the movie as wmv. And here's problem #2. The first movie shows the first 238 slides and then gets "stuck" on the 238th slide even though the music continues. The second movie gets "stuck" after 134 slides and shows black (even though there isn't any black with the transitions I used). At first, I blamed the DVD burning software, but it's the wmv file itself--confirmed by using windows media player. Any ideas about what's going on? RobertJ Tag: Show timeline Tag: 8928
  - 12
    - Extend time on Volume Fades and Effects? Is it possible to extend or adjust the time on the Volume Fade-In or -Out? How about adjusting the time on the Video effects? Tag: Show timeline Tag: 8927
  - 13
    - Moviemaker 2, A followup To those of you who have been following my complaints regarding Moviemaker 2 since around 8 December, and have yourselves contributed suggstions, I offer this bit of information. Dump the freebee MIcrosoft Moviemaker program, I will bet that I alone have forwarded at least 50 of those automatic problem reports to Microsoft. Get out your wallet, brush away the moths, and Invest around $70.00, to get a boxed copy of ROXIO EASY CD CREATOR, rev 6 platinum. I tried it myself,you will be amazed at the results with transitions, titles and music. The operating controls are similar to the remote control on your television.Then when you are thru, a second portion of the program/package, allows you to drag and drop the video to CD. Another option at about the same price level, is PINNACLE STUDIO 8, And if you are willing to go up to the $100.00 range, there is Another ROXIO product called VIDEO STUDIO 7. Now if I can get Microsoft to fix an annoying fault in MONEY 2004, I will be a happy man. Merry Christmas, Chanukka, Feliz Navidad (which ever applies) to all. Don Taylor This is not a paid commercial. Tag: Show timeline Tag: 8921
  - 14
    - Capturing video halts... While capturing video from Sony Digital HandyCam the video halts without warning. The video that is captured up to that point is fine. The HandyCam is still playing the video but the capturing is halted. It's happened at 3 different points in the video. Any solutions? Thanks Paul Tag: Show timeline Tag: 8920
  - 15
    - v ideo capture I am trying to capture video from my DV recorder through the firewire connection and somehow the connection is not recognized by any of the capture software. Anybody has idea what may be happening? Here are the details: recorder: jvc GR-DLV-805 OS: Windows XP pro 1394: ASUS P4C800-E on-board + now I have a ULEAD DV board installed; according to the device manager they are both functional DirectX 9.0b installed No DV capture driver (???) is found anywhere on my computer What else can I try? Tag: Show timeline Tag: 8916
  - 16
    - Automaticly exiting program When I try to add an effect to my project, the program just closes... No error, just goes down Just re-installed XP 2 hours ago, hoping this was the solution, but no. Anyone with some ideas on this one, please help.. Tag: Show timeline Tag: 8915
  - 17
    - how to uninstall Movie Maker The question is in the subject :-) My Moviemk.exe got corrupted but XP won't let me remove it. It sees it as a protected system file... Can anybody help? Tag: Show timeline Tag: 8914
  - 18
    - mm2 won't import I've read the last 2,000 messages on this board and a good part of the papa john site. I can: 1. capture, view and play a dv avi in Adobe Premiere 2. capture and preview while capturing in MM2 I cannot: 1. play raw dv's captured in either Premiere or MM2 in Media Player 2. render these dv's in G-Spot 3. when I capture with MM2, it dies on attempting to import. However the file is created and can be imported into Adobe Premiere. I have three machines: P4, P3 and P4 Toshiba laptop. The P3 plays and renders the above files. I have compared the loaded codecs and neither the P4 nor the P3 have any that are not on the P3. Media Player started acting funny after one of the service fixes since October 1. Has anyone dealt with something similar successfully? ________________________ Sincerely, Carey Robson Tag: Show timeline Tag: 8913
  - 19
    - What in the world made this happen? ALRIGHT THIS IS WHAT EVERYONE IS LOOKING FOR ONLINE. A MAGIC HAT THAT SHOOTS OUT MONEY FOR NOTHING.IT IS SO INGENIOUS NOT TO MENTION LEGAL YOU MIGHT SH#T YOUR PANTS WHEN YOUR DONE READING THIS SO GET STARTED!!! BUT YOU HAVE TO FOLLOW IT TO A LETTER FOR IT TO WORK!!!! : A little whileback, I was on my computer having a grand old time, just like you are now and came across an article similar to this that said you could make thousands of dollars within weeks with only an initial investment of $6.00! So I thought, "Yeah, right,this must be a scam", but like most of us, I was curious, so I kept reading. : Anyway, it said that you send $1.00 to each of the 6 names and address stated in the article. You then place your own name and address in the bottom of the list at #6, and post the article in at least 200 newsgroup. (There are thousands) No catch, that was it. So after thinking it over, and talking to few people first, I thought about trying it. I figured what have I got to lose except 6 stamps and $6.00, right? Like most of us I was a little skeptical and a little worried about the legal aspects of it : All, So I checked it out with the U.S. Post Office (1-800-725-2161) and they confirmed that it is indeed legal! Then I invested the measly $6.00. Well GUESS WHAT!!?. Within 7 days, I started getting money in the mail! I was shocked! I figured it would end soon, but the money just kept coming in. In my first week, I made about $25.00. By the end of the second week I had made a total over $1,000.00! In the third week I had over $10,000.00 and it's still growing. This is now my fourth week and I have made a total of just over $42,000.00 and it's still coming in rapidly. It's Certainly worth $6.00,and 6 stamps, I have spent more than that on the lottery!! : Let me tell you how this works and most importantly, why it works? Also, make sure you print a copy of this article NOW, so you can get the information off of it as you need it. STEP 1: Get 6 separate pieces of paper and write the following on each piece of paper "PLEASE PUT ME ON YOUR MAILING LIST." Now get 6 US $1.00 bills and place ONE inside EACH of the 6 pieces of paper so the bill will not be seen through the envelope to prevent thievery. Next, place one paper in each stating the above phrase, your name and address, and a $1.00 bill. What you are doing is creating a service by this. THIS IS ABSOLUTELY LEGAL! Mail the 6 envelopes to the following addresses: #1)Jonathon Markwood 3308 Birdsong Way Birmingham, AL 35242 #2) P. Ortner 29 Briarlee Dr. Tonawanda, NY 14150 #3)Jarod Astwood 2125 Seaport Circle Apt.215, Winter Park FL 32792 #4) Ricky DeMaio 471 McCutcheon rd, Hudson WI 54016 #5)Justin Schuster 221 N. Huron St. Wheeling, WV 26003 #6)Joe Lamberti P.O. Box 9201 Waterbury, CT 06724 STEP 2: *DO NOT TAKE OFF #6 AND PUT YOUR NAME AND ADDRESS!!* -- take the #1 name off the list that you see above, move the other names up (6 becomes 5, 5 becomes 4, etc?.) and add YOUR Name as number 6 on the list. DO NOT TAKE OFF #6 AND PUT YOUR NAME AND ADDRESS!! STEP 3: Change anything you need to, but try to keep this article as close to original as possible. Now, post your amended article to at least 200 newsgroups, message board. (I think there are close to 24,000 groups) All you need is 200, but remember, the more you post, the more money you make! ---- DIRECTIONS----HOW TO POST TO NEWSGROUPS, MESSAGE BOARD---------- Step 1) You do not need to re-type this entire letter to do your own posting. Simply put your cursor at the beginning of this letter and drag your Cursor to the bottom of this document, and select 'copy' from the edit menu. This will copy the entire letter into the computer memory. Step 2) Open a blank 'notepad' file and place your cursor at the top of the blank page. From the 'edit' menu select 'paste'. This will paste a copy of the letter into notepad so that you can add your name to the list. Step 3) save your new notepad file as a .txt file. If you want to do your postings in different sittings, you'll always have this file to go back to. Step 4) Use Netscape or Internet explorer and try searching for various newsgroups (on-line forums, message boards, chat sites, discussions.) Just example you log on any search engine like yahoo.com,google.com,altavista.com, excite.com then you search with this subject ?millionaire message board? or ? money making message board? or ?employment message board? or ?money making discussions? or ?money making forum? or ? business message board? etc. You will find thousand & thousand message boards. Click one by one then you will find the option post a new message. : Step 5) Visit these message boards and post this article as a new message by highlighting the text of this letter and selecting paste from the edit menu. Fill in the Subject, this will be the header that everyone sees as they scroll through the list of postings in a particular group, click the post message button. You're done with your first one!. : Congratulations? THAT'S IT! All you have to do is jump to different newsgroups and post away, after you get the hang of it, and it will take about 30 seconds for each newsgroup! ** REMEMBER, THE MORE NEWSGROUPS OR MESSAGE BOARD YOU POST IN, THE MORE MONEY YOU EILL MAKE!! BUT YOU HAVE TO POST A MINIMUM OF 200 ** That's it! You will begin receiving money from around the world within days! You may eventually can rent a P.O. Box due to the large amount of mail you will receive. if you wish to stay anonymous, you can invent a name to use, as long as the postman will deliver it. **JUST MAKE SURE ALL THE ADDRESSES ARE CORRECT. ** : Now the WHY part: Out of 200 postings, say I receive only 5 replies (a very low example). So then I Made $5.00 with my name at #6 on the letter. Now, each of the 5 persons who just sent me $1.00 make the MINIMUM 200 postings, each with my name at #5 and only 5 persons respond to each of the original 5, that is another $25.00 for me, now those 25 each make 200 MINIMUM posts with my name at #4 and only 5 replies each, I will bring in an additional :$125.00! Now, those 125 persons turn around and post the MINIMUM 200 with my name at #3 and only receive 5 replies each, I will make an additional $625.00! OK, now here is the fun part, each of those 625 persons post a MINIMUM 200 letters with my name at #2 and they only receive 5 replies, that just made me $3,125.00!!! Those 3,125 persons will all deliver this message to 200 newsgroups with my name at #1 and if still 5 persons per 200 newsgroups react I will receive $15,625.00! With an original investment of only $6.00! AMAZING! When your name is no longer on the list, you just take latest posting in the newsgroups, and send out another $6.00 to names on the list, putting your name at number 6 again. And start posting again. The thing to remember is, do you realize that thousands of people all over the world are joining the internet and reading these articles everyday, JUST LIKE YOU are now!! So can you afford $6.. and see if it really works?? I think so? People have said, 'what if the plan is played out and no one sends you: the money? So what are the chances of that happening when there are tons of new honest users and new honest people who are joining the internet and newsgroups everyday and are willing to give it a try? Estimates are at 20,000 to 50,000 new users, every day, with thousands of those joining the actual Internet. Remember, play FAIRLY and HONESTLY and this will work. Tag: Show timeline Tag: 8912
  - 20
    - DeInterlacing Captured Video I've noticed that when I capture video using MM2, the video is interlaced. Is there a way to deinterlace the video as I capture it?? If not during capture, is there a way to deinterlace the video after it's captured?? BTW, I'm trying to capture the video in DV-AVI format. And I've already looked at PapaJohn's web site and didn't find anything there... All and all help is greatly appreciated, stefan Tag: Show timeline Tag: 8906
  - 21
    - Movie Maker 2 closes When adding an effect or Transition to the storyboard, Movie Maker closes. No erors or anything, just closes. Doesn't matter which way you add the effects or transitions, as soon as it tries to add it to the storyboard it closes, this is on XP. any ideas? Tag: Show timeline Tag: 8905
  - 22
    - It shuts down automatically My movie maker loads fine, but when I try to work on my movie, it automatically shuts down. There is no message or pop up box. It does this every time. I'm working on MM2. I have winxp. Help!!! Tag: Show timeline Tag: 8904
  - 23
    - Audio absent during capture I'm just learning to use Windows Movie Maker, which came already loaded on my new Dell Dimension 8300, running Windows XP. I'm using a Pinnacle LINX-2 capture device from my analog super 8 video camera to my computer. During the capture process, in Movie Maker, the video previews fine but I don't get any audio. However, when I play back the captured clip, the audio is there. Any suggestions as to why the audio can't be heard during the capture? Pawking Tag: Show timeline Tag: 8900
  - 24
    - MM2 Problems Everytime I import a clip into MM2 I get a pop up box saying: Windows Movie Maker has encountered a problem and needs to close. We are sorry for the inconvenience. Then askes me to send or don't send the report. I check out the what the error report contains and it says: Error signature: AppName: moviemk.exe AppVer: 2.0.3312.0 ModName: subtitds.ax ModVer: 1.4.0.0 Offset: 000066a2. Then after i send it I click on more information and it says this on a webpage: Analysis Information Thank you for submitting an error report. The error was likely caused by: Subtitle (subtitds.ax) Subtitle (subtitds.ax) is distributed by many companies. Please contact the company that provided you with Subtitle (subtitds.ax). If you are unsure about which company provided you with Subtitle (subtitds.ax) contact Tobias Waldvogel. It seems there is an error with Subtitle (subtitds.ax), correct? How do I fix this? Tag: Show timeline Tag: 8899
  - 25
    - Audio mutes when scrubbing I am new to Movie Maker. I have created a Project with a timeline. When I scrub along the timeline or in the preview window, the audio becomes muted and will not play even when I stop scrubing and simply play the clip. The audio can be restored by clicking on Clip on the toolbar then Audio then Mute (this does not resore the sound yet) then clicking again on Clip, then Audio and then unchecking the (by now checked) Mute box. This is all a bit tedious as the muting occurs every time I scrub forward or back and can only be restored by going through the above elaborate routine I have tried reinstalling Movie Maker but the problem persists and I have created another project and the same problem occurs. Any suggestions for curing the problem? Tag: Show timeline Tag: 8896

Is it possible to have the timeline (date, time etc)
show on the finished product(on a CD) when using Movie
Maker 2? It shows at the top when working with Movie
Maker but dissapears with the final movie.

Top

Show timeline by anonymous

anonymous
Wed Dec 17 23:28:45 CST 2003

It won't do it automatically. You need to add what you
want by using text titles or embed some info about the
file in the project properties.

PapaJohn

>-----Original Message-----
>Is it possible to have the timeline (date, time etc)
>show on the finished product(on a CD) when using Movie
>Maker 2? It shows at the top when working with Movie
>Maker but dissapears with the final movie.
>
>.
>

Top