Runtime Error?

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - WrongColorsInVideoPlayback Hi, I've used MM 2 successfully on a few home projects. Recently, I've run into problems with video playback/review. The color quality is overblown with green and yellow hues. I'm not sure, but this color change may have occurred about the time I installed multiple softwares for HP photosmart photo printer, MGI photosuite 4 for a vivitar digital camera, and nero software for dvd 6in1 player. Any ideas? ? I tried Tools > Options > Compatibility > Restore All Defaults in MM to no avail. -- RF3 Tag: Runtime Error? Tag: 29031
  - 2
    - rotate clip? HI Can I flip or rotate a clip. I used my digital camara to make a movie but I put it on its side... I thought that I could always rotate it. Can I or how can I? Plz help. Any suggestions would be greatly appreciated. Thanks Jackie Tag: Runtime Error? Tag: 29029
  - 3
    - Video Lost in conversion I just saved a project to my pc as a movie. the movie is 64 minutes long. At the 15 minute mark or so, I loose video. I turned of filters to see if that helped, but I have tried 4 times so far with the same results each time. This is the first time I have used WMM since the 2.1 upgrade. Havn't had this conflict before the install. Any thoughts on how it happens? Tag: Runtime Error? Tag: 29025
  - 4
    - DVD I have just got windows xp media center and I have no idea how to burn a DVD to a DVD. I have the DVD reader and writer/ burner. I'm finding burning a CD to the media library and then to a CD fine...but there are no DVD options...help! Tag: Runtime Error? Tag: 29023
  - 5
    - Transition arrangement Is there a way to group transitions in MM2 other than alphabetically, perhaps by the most commonly used? This will eliminate the scrolling through all transitions. Tag: Runtime Error? Tag: 29022
  - 6
    - Saving Movies With Move Maker Greetings- Would anyone be able to tell me why when I follow the steps to save a finished movie that I created from clips made with my webcam and I attemp to playback the CD-R in my Windows Media Player 9, it only shows the title captioning that I created and only plays the sound? Am I missing a codec or something?, it seems that it only plays back correctly from the CD-R when I open it with the Movie Maker, -I am using Windows XP SP2. All The Best! Elaine Tag: Runtime Error? Tag: 29021
  - 7
    - JVC GR-D53ek My JVC GR-D53ek camcorder keeps on informing that I should clean the heads even after I have cleaned them. Is anyone else having this problem ? Sorry if this is the wrong group for this problem. Tom..... Tag: Runtime Error? Tag: 29012
  - 8
    - importing video...need help I have a sony camcorder, but it has neither a USB or Firewire output. The camera does have output in the form of an S-Video, and audio jack (which leads to RCA cable ends.) SO, what is the best way for me to import video to my laptop? FYI: I only see a USB port on the computer. I assume I'll have to buy some sort of converter. Thanks for the help. Tag: Runtime Error? Tag: 29011
  - 9
    - Web Hosting? Can somebody tell me if I can export a Windows Movie Maker file to a web site so that others can see it? If you know of a web hosting site that offers this service, I'd appreciate knowing. Thanks Tag: Runtime Error? Tag: 29003
  - 10
    - Deleting Title on a clip I put a title on a clip and would like to remove it but cannot figure out how to do it. If I delete the picture (clip) it just goes onto the next clip. Help! There must be a way to edit a title out. Tag: Runtime Error? Tag: 29000
  - 11
    - Capturing Widescreen Format Hi, am using Windows MM for the first time, attempting to capture video from my Sony DV which I recorded in widescreen 16:9 format. I cannot see how to get MM to recognise this, it's stretching all my video into 4:3 (I think!) and everything looks awful. Can anyone advise? My main goal at this point is to capture some still images from the video. I later want to write the video to DVD in widescreen format. Would I be better off using another package? Thanks in advance for any advice. Tag: Runtime Error? Tag: 28999
  - 12
    - Recording Movie back to camera I have a Panasonic mini DV camera. We have created our movie in movie maker with all the bells and whistles and we are unable to record it back to the camera to then transfer it to VHS. Can someone please help? I have tried several things. Like converting the movie to Mpeg, and all that stuff but the movie comes up not recored. It looks like it is going through the recording process bit nothing happens. Any help would be greatly appreciated. Thanks in advance. Tag: Runtime Error? Tag: 28994
  - 13
    - what settings to get best quaility dvd I have been trying to down load a video to edit and then send it to sonic to make a dvd. I am having a problem with the video quality when I am burning the dvd. What settings should I use to download and what settings should I use when saving my moviemaker project to get the best quality? Tag: Runtime Error? Tag: 28991
  - 14
    - what settings to get best quaility dvd I have been trying to down load a video to edit and then send it to sonic to make a dvd. I am having a problem with the video quality when I am burning the dvd. What settings should I use to download and what settings should I use when saving my moviemaker project to get the best quality? Tag: Runtime Error? Tag: 28990
  - 15
    - Need Simple Help on Transitions/Titles I enjoy MM2, but have trouble remembering how to add textual messages to the video itself or as transitions from one clip to another. For example, before a clip on a beach video, I might want to have text giving the location and date and ages of kids, as well as any other notes. Or during video, have text superimposed on screen with commentary. Thanks! Tag: Runtime Error? Tag: 28982
  - 16
    - Papajohns website Help am I doing something wrong? Icant www.papajohn.orf is that right wording Tag: Runtime Error? Tag: 28978
  - 17
    - Transitions Ok I am getting a error message. And there is no area were it should be for transitions.Adding music text etc.Says all my file are corrupted. How do I un-Install and Re-install Movie Maker.I also Have the plus unpgrade I downloaded for the second time from the internet.Does Microsoft have a phone number I can call for tech help with this problem.Please wbs Christmas is comming soon. Respectfully Greg Hall -- Gregory A. Hall Tag: Runtime Error? Tag: 28975
  - 18
    - Difficulty in rendering transitions - Q to Papa John I produced a 15 minute ski movie with plenty of short action clips and many transitions (including some of MM2 winter transitions) and movie maker 2 refuses to render this to DV AVI (but will to WMV9 - highest quality PAL). If I take out all the transitions it renders quickly to DV AVI but obviously screws up the look and feel of the movie without the transitions. I also get the occasional skip in the music backing track which I see described elswhere as being attributable to MP3 files when rendering directly to Dv AVI. I see a solution for music problem is to render to WMV then drop that back in as a single clip to MM2 and render again to DV AVI which works first go for the music. My question is ---- isnt this killing the quality of my video? ie first to WMV and then to AVI? by the way I have a recent high spec machine with 1 gig of ram and separate 120gb hard disk only for movies and am at a loss to understand the transitions rendering issue. Also your site is great...it saved me hours of frustration. Tim Tag: Runtime Error? Tag: 28970
  - 19
    - WMV to AVI What is the best program to convert WVM to AVI. Thank you Larry Tag: Runtime Error? Tag: 28961
  - 20
    - Windows Movie Maker Profile 10 I am trying to duplicate Profile 10 which is Video for broadband (340 Kbps), but I want to change the size to 240x180 and load the profile in a batch file for Windows Media Encoder. What Key frame interval is used by Movie Maker? What buffer size is used? What Video smoothness is used? Anyone know the exact Profile 10 settings? Any help would greatly be appreciated. Tag: Runtime Error? Tag: 28959
  - 21
    - Subtitles Hi, I want to create subtitles for my movie. The problem is, the "subtitles" style when adding text to video doesnt let you change the background. Is there any way I can get around this? I need to be able to change the background colour. Or does anyone know of any other addins I can get? If not, then I'll be forced to use some other forecolor such as Red, which isnt really appropriate for subtitles. Any response gratefully appreciated. Andy Tag: Runtime Error? Tag: 28957
  - 22
    - Runtime Error R6025 Running XP Pro, MM2.1 and SP2. Every time I export my movie back into my DV camera, it stops at the same point (29%) and just hangs. After waitng an hour or so, I click Cancel and a pop-up comes on displaying: "Active Title Bar" = Microsoft Visual C++ Runtime Library "Window" = Runtime Error Program C:\Program Files\Movie maker\moviemk.exe R6025 - pure virtual function call I've been successful many times before without problems. Not sure what's causing this? I notice in some similar posts it mentions "if you are crashing and get a chance to send the report into MS, please do so, then post back the bucket number". As it does not crash I cannot send an error report. I also noticed in other posts mentions of "Microsoft Visual Studio". I've never heard of this so don't believe it's on my computer? Any help on this matter would be greatly appreciated. -- Kind Regards to all... Jay Hewatt Tag: Runtime Error? Tag: 28956
  - 23
    - saving to cd after editing a home movie i try to save to cd it always freezes on 58% could anyone help on this problem Tag: Runtime Error? Tag: 28953
  - 24
    - Can't burn movie from moviemaker to DVD.... I am trying to burn the movie I made to a dvd-r disk and it will not work. I know my drives are installed properly and when I am asked to put the dvd-r or dvd+r into the correct drive I do and it does not recognize it. It will burn it to a cd-r but when I put that in my dvd player something comes up that says mp3 playlist. I want to be able to put the movie in a dvd player and play it for family members to see and also burn it so several other dvds to pass out as xmas gifts.. any help would be thankful. Tag: Runtime Error? Tag: 28951
  - 25
    - cant save as wmv, or edit videos the title says it all really, i cant save as wmv, or it crashes my comp, and i cant edit or cut clips or my comouter will crash, any suggestions of waht to do??? Tag: Runtime Error? Tag: 28949
- Next
  - 1
    - Playing a Movie Maker movie on a DVD player If you want to save your movie to a CD/DVD for play on a DVD player, what is the best format to save the movie in. Movie Maker saves the movie in a wmv file. Is it best to convert this file to some other file type before burning it to a CD or DVD? What DVD players will play a wmv file. I bought a HIGHMat Panasonic, but it says it supports WMA files, but does not mention WMV. Tag: Runtime Error? Tag: 28947
  - 2
    - cannot import anything into movie maker 2 New computer Windows XP Media Center - Get this error message when trying to import photos or videos into Movie Maker 2: C:\Documents and Settings\john\Desktop\e2p1.jpg could not be imported. Unspecified error When I close Movie Maker and reopen it, Pictures show in collection pane, but cannot insert in storyline. Tag: Runtime Error? Tag: 28943
  - 3
    - Transitions I would like to be able to specify random use of all transitions or possible select one transition to apply throughout the show. All i can find is that I need to place each one individually. Tag: Runtime Error? Tag: 28942
  - 4
    - Noises in audio and some pics hesitate during slideshow Hi, I have about a 6 minute slideshow/movie made with digital pitures and a song downloaded onto my computer. It looks alright when I play it back, but once I save it as an AVI (so I can encode it) I use a TMPGEnc to make it into a VCD. While watching the playback on my television the audio skips at times - sometimes more noticable than others...and the pictures or the transitions hesitate or have a boxed look to them. Is there a way to smooth it all out - to give it a sharper look, have it flow smoothly with audio skips as well?? Please HELP!!! Thanks!!! Tag: Runtime Error? Tag: 28940
  - 5
    - DV tape drives Any one sell mini-DV tape drives to consumers? I don't want to wear the tape mechanism out on the mini-DV camera. Tag: Runtime Error? Tag: 28939
  - 6
    - Playing in Windows Media Player How can i watch a video made in Windows Movie Maker and watch it in Windows Media Player? I saved my video but the ending i guess or something is not letting it play. The ending show MSWMM Thanks....Please help Tag: Runtime Error? Tag: 28937
  - 7
    - Another crazy resource for hobbyists+ http://www.homebuiltstabilizers.com/ Check out the cranes & jibs...! Whoa. . Tag: Runtime Error? Tag: 28936
  - 8
    - Sony mini-DV and Movie Maker? I've installed a MPEG-2 codec but still cannot save my movie to my Sony DCR-TRV250. PC and Sony seem to communicate over the 1394 cable fine. Tape counter runs and the REC icon is displayed. Nothing winds up on the tape. Help -- www.operationuplink.org Tag: Runtime Error? Tag: 28927
  - 9
    - And, for those who haven't already seen it, the $14 steadycam http://www-2.cs.cmu.edu/~johnny/steadycam/ . Tag: Runtime Error? Tag: 28920
  - 10
    - Make your own teleprompter Saw this on Slashdot yesterday; thought I'd share... http://www.creativepro.com/story/feature/22302.html . Tag: Runtime Error? Tag: 28919
  - 11
    - Perfect Disk - thanks JK! I just downloaded Perfect Disk per John Kelly's request and it did a wonderful job of defragmentation, especially the free space. I was burning a DVD for a friend and it appeared to create successfully. The disk was ejected and after about 3 minutes a memory error popped up. I figured the disk was toast, but I popped it in the PC DVD player and Media player played it fine. Not sure what the error was about. I'll have to wait and see if my friend can play it. I put it in on a -R and my home player only plays +R. Anyway, because of the error, I figured it was time to try a better defrag tool (the experts here always say tune up your hard drive when things stop working) and this one works. Even though they give you 30 days to try, Raxco is running 20% off right now so I may even jump on that and buy it. XPs defrag tool just leaves your larger files scattered among the free space. Perfect Disk consolidates it all. Thanks for the tip John. Tag: Runtime Error? Tag: 28915
  - 12
    - Vcr to Camcorder I have the following and nothing seems to work. Sony CCD-TVR260, VCR and a ASUS 6600 video capature card. I do not have a firewire for the PC which is running XP-SP2. I've tried to copy VCR to to capture card but I just get the in use message. I tried going thur the Sony but nothing and I'm not even sure if this model will allow that. I should say I have down loaded and use every driver I can think about for the video card. Would having the firewire make the difference? Tag: Runtime Error? Tag: 28914
  - 13
    - MM2 doesn't have audio when playback The clips imported to MM2 playback provide only the audio track -- no video. The clips play fine in other applications such as Windows Media Player. This happens with clips from various sources. Any thoughts would be appreciated! Tag: Runtime Error? Tag: 28912
  - 14
    - Frame by frame editing This is a multi-part message in MIME format. ------=_NextPart_000_00B7_01C4E48B.F849F500 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hello fellows; I need your help. How to make frame by frame image editing? Using text Title Overlay is not acceptable and also by Deleting those important frames. Actually I need to know how I could extract some selective frames, I can make image editing then how to input back to MM2. What other programs must I need? My Thanks In Advance! Best Regards, Rino --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.813 / Virus Database: 553 - Release Date: 12/13/2004 ------=_NextPart_000_00B7_01C4E48B.F849F500 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2800.1476" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT size=3D2>Hello fellows; I need your help. How to make frame = by frame=20 image editing? Using text Title Overlay is not acceptable and also by = Deleting=20 those important frames. Actually I need to know how I could=20 extract some selective frames, I can make image editing then = how to=20 input back to MM2. What other programs must I need?   My = Thanks=20 In Advance!</FONT></DIV> <DIV><FONT size=3D2></FONT> </DIV> <DIV><FONT size=3D2>Best Regards,</FONT></DIV> <DIV><FONT size=3D2>Rino</FONT></DIV> <DIV> </DIV> <DIV><FONT size=3D2><BR>---<BR>Outgoing mail is certified Virus = Free.<BR>Checked=20 by AVG anti-virus system (<A=20 href=3D"http://www.grisoft.com">http://www.grisoft.com</A>).<BR>Version: = 6.0.813 /=20 Virus Database: 553 - Release Date: = 12/13/2004</FONT></DIV></BODY></HTML> ------=_NextPart_000_00B7_01C4E48B.F849F500-- Tag: Runtime Error? Tag: 28911
  - 15
    - No audio I have an anolog controler with 8mm tape. I put it on the computer using the A/V inputs. I get video, but there is no sound. I have version 5.1 with service pack 2. What should I do to get the audio to work right. Thank to whoever replys. Tag: Runtime Error? Tag: 28910
  - 16
    - DVD player with HIGHmat capability won't read my wmv file I made a movie and then saved it to my hard disk as a wmv file. Then I burned it to a CD-R. Tried to play it in my brand new Panasonic S47 DVD Player which I bought specifically because it is supposed to support Windows media. The DVD attempts to read my wmv file but then I get an error message that it cannot read the disk. Put a new one in. Thanks for any help. FYI, the CD-R I am using is from Office Depot. Dave Tag: Runtime Error? Tag: 28908
  - 17
    - Amazing Stuff VOB to AVI to VOB Hello, As a consequence of quite a few questions being asked recently about the use of Nero for making a DVD I conducted the following tests 1) Recorded by way of a dedicated DVD-VR machine (Its a standalone machine that performs like a VHS tape deck except it uses DVD disks and creates true DVD formatted recordings) 2) Using Nero 6 Reloaded (with latest updates) I extracted the video from a film recorded via satellite 3) Using Nero converted the VOB files to AVI 4) Using Movie Maker 2.1 removed adverts etc 5) Imported result to Nero 6, set DVD quality to Highest, created a very simple menu with one animated button 6) Burn film to a Dual Layer disc (Complete file size was just over 6GB) 7) Am now watching it on an ordinary DVD player The Quality??? I have only watched 15 min's or so which contains night time as well as day light (The Film is The Fast and Furious) and as far as I can tell, its as perfect as the original. I do realise that there MUST be some loss of quality...its next to impossible to get around that...but I have to say that I am extremely pleased with the result. I used a variable bit rate...I should have printed out the log, which is now lost....I think the maximum was just over 9Mb/s which is perhaps high...I don't know what the minimum was I can heartily recommend Nero 6 Reloaded to any one interested in trouble and hassle free DVD burning -- Best Wishes.....John Kelly www.the-kellys.org www.the-kellys.co.uk Check out free video hosting at www.the-kellys.org ---- \|||/ (oo) ----------ooO-(_)-Ooo------------- All material gained from other sources is duly acknowledged. No Value is obtained by publishing in any format other peoples work Tag: Runtime Error? Tag: 28906
  - 18
    - MP2 import into MM I have finally been able to get MM to import my .mp2 movie file, but when I go to add the movie to the storyboard and add effects to it it locks up. I thought it was just a one time fluke so I had to End Task the program and go into it again. After multiple tries I could get it to play, but then if I try to go and play it again in MM it acts like it is playing, but you see no video. If I try and restart the movie I get the same results. I thought that maybe it was because it was in a mp2 format so I have another computer and I imported the same mp2 file on it and did the same things with no problems. If on the machine I was able to get it working on I created a movie of it as a AVI and then tried that on the computer that wasn't working with the mp2 file it handled that new AVI just fine. Any ideas why this would be? Could it be memory? I have 500mb of memory in the machine that is not working right. Could it be codecs? I would like to get to the bottom of this, so if you have any ideas please let me know. Thanks! Tag: Runtime Error? Tag: 28903
  - 19
    - 'Can't Save a Movie' issue I just added a new section to the Problem Solving > Can't Save a Movie page of my website. It covers how to watch memory usage and know when it reaches the combined total of your RAM and virtual memory swap file. -- PapaJohn Movie Maker 2 - www.papajohn.org Photo Story 2 - www.photostory.papajohn.org Photo Story 3 - use the menu branch at www.papajohn.org . Tag: Runtime Error? Tag: 28891
  - 20
    - My friend is unable to watch a dvd that I burned I downloaded the movie from my camcorder into Movie Maker, then added music etc. and then burned it onto a dvd. I was able to view the dvd onto my computer but when i gave it to my friend, she is unable to view the dvd on her computer & her dvd (TV) player. Help....did I miss something in creating this dvd? Tag: Runtime Error? Tag: 28889
  - 21
    - Error message - won't start I get "Unspecified Error" when I click on moviemk.exe. I find the .exe file in two places along with assorted other .dll, .chm and .inf files. A Movie Maker file in the Programs Files folder and in several locations in Windows folders. I thought installing Sevice Pack 2 would solve the problem. It didn't. It did install the 2.1 version, updating both the .exe files in Programs Files>Movie Maker and in Windows>system32>dllcache - both files 3,472KB. Does anyone have any suggestions about resolving this "Unspecified Error" problem? Tag: Runtime Error? Tag: 28887
  - 22
    - blank tape AFTER saving to DV camera I made a movie, added titles then saved it to my DV camcorder with Movie Maker 2. My PC starts recording finished movie onto camcorder (the tape counter starts running and the REC icon is shown). But there is nothing on the tape, it is just a blue screen. Win XP Home, no SP2, MM 2.0, 1394 cable, Sony Mini DV camcorder Any help is appreciated. I've followed scrupuously the MM tutorial. Tag: Runtime Error? Tag: 28880
  - 23
    - Importing .mp2 file I am importing a .mp2 movie into MM and it acts like it imports it, but when I click on the clip it launches a screen of just the first still image of the movie. If I try and play the clip from within MM it show the time moving like it is playing, but I get no video. I am trying to add the movie to the story board now and create the movie and seems like MM is just locking up. Any suggestion why this might not work? Thanks Tag: Runtime Error? Tag: 28879
  - 24
    - Capture Video in PAL format After installing SP2 the video capture with Movie Maker became impossible. I can not capture in PAL format. I already installed the machine from scratch and the problem persists. Iâ??ve been spending hours looking in other communities and I think Iâ??m not the only one having this problem. Still I would like to have your advice on it. PS â?? I have a Canon DV 20 Camera and the capture is done trough 1394 firewire board. Tag: Runtime Error? Tag: 28878
  - 25
    - unable to save movie file....of course... Same message everybody else is getting, only my qasf file substitution didn't - nor did the fifteen other things i tried - new and old versions of codecs, divx's, players, voodoo. tried everything i could from the pizza guy's site...nada. zero. zilch. nah-hee. nyet. was psyched to use wmm b/c it had some cool stuff - for a beginner - but this drama has eaten up 15 hrs. onto other novice video editing software... Tag: Runtime Error? Tag: 28875

Whenever I try to export my movie from the computer to my camera, it stops
after 28%.

Whenever I try to save it as a movie file, it stops after about 57%.

Then when I go to clikc out, an error pops up, saying something about a
runtime error.

What's going on here and what can I do?

Top