Problems with sending Movies by email

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Caprute analog questions, cont. attn "Hank" My original ? and Hank's response is below. I have to admit that I am a little slow when it comes to this high powered stuff, but ther has to be more to it than Hank says, and I cannot se what it is. How do I hook up my VCR or 8mm camcorder for instance? Oh, I guess I use co-ax for the VCR, but how about my camcorder? Can I do that without tools as well Thanx again, Lee Hank wrote According to the spec sheet I saw for that machine, it comes with TV tune card built-in. Nothing else to buy You should be able to launch MM2 and select "capture video" and be good t go Good luck -Han "Leeb" <anonymous@discussions.microsoft.com> wrote in messag news:1C1CA03E-10AC-4BFC-B1E7-09F1336380B6@microsoft.com.. > I am sorry for the dumb questions, but I feel like a dolt. I just bega reading this board and find that everyone is well beyond me in understandin WMM. I need some basic knowledge >> I want to copy videotapes (VCR and those created with a Canon Hi8 ES2500 to DVD. No editing at this time, but that may come later. My PC - Son RZ32G - has USB, and video connectors - S-Video, Composite audio/video, an S400 (IEEE 1394) port. I can even input a TV signal I guess - don't inten to try. But it doesn't look like it has what I need to do the job >> Do I need to ADD a "capture device" of some kind since it appears that have only analog tapes to deal with? Must I upgrade my video card (NVIDI GeForce4 MX 440 with AGP8X (Sony))? Are there alternative ways to go Suggestions/recommendations? Thanx, Lee > Tag: Problems with sending Movies by email Tag: 12644
  - 2
    - Analog capture thru sony dv camera I am trying to capture analog video using my Sony TRV38 digital video camera as a converter.I am using an IEEE1394 connection.When I go to capture the video it shuts the camera off. The only way I can capture the video is if I turn the camera on first. Then select record pause on the camera in vcr mode, and then connect the IEEE1394 cable. I get an error message, close it, then it starts to capture the video. Is this the only way to capture analog video thru my digital video camera using a firewire connection? Tag: Problems with sending Movies by email Tag: 12642
  - 3
    - movi maker Tag: Problems with sending Movies by email Tag: 12641
  - 4
    - further important clue to my WMM problems::: In my ongoing quest (about a month now) to clean up the excessive jerky, hic-cup-py platyback of video in my WMM2, I want to add the following clue: After I capture video, there is that horizontal green progress bar, that I think(?) says somethng like "loading", but now it just zips(!) right through itself instantly ... whereas in the past when my WMM2 was working *right*, that bar would slowly progress left-to-right as it gauged the processing of my captured video Anyhow, nowadys, it does none of that - it just blows right through it. Can this suggest something? Is something zapped on my system? I've tried reloading WMM2 a few times; no luck ... still stranded on an island .. with no WMM2 to play with ..... help .. Thanks, Michael Tag: Problems with sending Movies by email Tag: 12640
  - 5
    - DVD player that plays back WMV 2Q2004 When this player is available I think I will finally take the plunge and convert my edited DV files to high qaulity WMV. http://www.pcworld.com/news/article/0,aid,114279,00.asp I currently use the free Windows Media Encoder 9 Series to convert my DV files to a WMV format with goood quality and that could tolerate a few re-encoding generations if necessary. However, I am reluctant to delete any DVs because I don't know if the format I selected will playback in a hardware device. This player would validate that. This is my current "Encode DV.bat" file: cd \program files\windows media components\encoder rem the following command is all on one line cscript.exe wmcmd.vbs -input "C:\Video\Edited" -output "C:\Video\Encoded" -v_codec WMV9 -v_mode 2 -v_quality 85 -v_keydist 1 -v_preproc 1 -a_codec WMA9PRO -a_mode 2 -a_setting Q75_44_2_24 rem pause so that you can see any possible errors in the command pause The script above encodes all files in "C:\Video\Edited" to variable bit rate quality level 85 deinterlaced, audio quality level 75. The results are placed in "C:\Video\Encoded". For all the switch definitions see Start Menu, All Programs, Windows Media, Utilities, Windows Media Encoding Script, the Using command-line options section Tag: Problems with sending Movies by email Tag: 12639
  - 6
    - Problem with project in movie maker When a make a project and will try to play it the voice is like "DUNALD DOCK". There are some projects which are ok. Start after a recovery start and windows update Help 044127345@telia.com Tag: Problems with sending Movies by email Tag: 12632
  - 7
    - Saving to SVCD... I want to make autorunning SVCD/VCD discs. Note that I haven't got a DVD recorder, and the computer is getting a bit too long in the tooth to upgrade... (P3/700 + 512 MB of memory) I can successfully save .WMV files from TV, VCR or VHS camcorder via my *Belkin USB Videobus* (yes,only USB1.1. I don't have USB2 or Firewire.) I am unsure of the _best_ way to proceed though, and would be grateful for any advice. -- ¦ zulu ¦ Tag: Problems with sending Movies by email Tag: 12625
  - 8
    - converting files how can i convert wswmm files to avi or mpeg files please reply bac thanx Tag: Problems with sending Movies by email Tag: 12624
  - 9
    - can't put my movie onto my website I had made a video tutorial to put on my website and the file extensions that are made are either .wav or .mswmm. My website only accepts .avi .mov or mpeg . Is there a way to change the file extension or choose it before it gets saved? I tried to have it put on the web so people coming to my website can access it through a link, but it keeps telling me that they are not available somehow. Any suggestions? Does NVIDIA have anything to do with the Windows Movie Maker? I don't know where that came from. Tag: Problems with sending Movies by email Tag: 12622
  - 10
    - import of .mov-files hi experts is there any way to import .mov-files to movie maker my nikon coolpix saves only the .mov-format. Thanx in advance for your help w. Tag: Problems with sending Movies by email Tag: 12621
  - 11
    - copy MM2 to CD playback on media player not responding I chose "best quality for playback on my computer (recommended)" It went through the regular program taking about 35 min. to fin. playback on medie Player ...comes up and says there is an error reading from the CD Rom??? It will not play back.. Can you help Please... Terry D Tag: Problems with sending Movies by email Tag: 12619
  - 12
    - I have problems with mm2 after i downloaded the new updates from windows website, and after downloading MM2 with the updates every time i try to open it, it opens and everything but when i try to view or choose a video trasition or do anything with video editing it shuts down the program by it self. I don't know what i can do i tried the best i could i tried to download it again, but no use still have the same thing. If anyone can help me please send me an e-mail at rsoboh@yahoo.com Thanx a lot and i appriciate ur help Tag: Problems with sending Movies by email Tag: 12618
  - 13
    - I got microsoft success story I heard about movie maker, I own a digital camcorder so I went to buy a good computer with XP so I could download the (FREE) movie maker ...well it does not work and the more I search the more I find out the tons of problems with the program....and I try to get help and they send me to the guy I bought the PC from and he tells me that he does not provide technical support with a program downloaded from Microsoft, I go back to Microsoft and they tell me I got to pay..........what a joke Tag: Problems with sending Movies by email Tag: 12616
  - 14
    - digital cameras avi files I have a canon powershot s50 and have taken some videos with it. The files are avi and the problem that Im having is that movie maker will not open the files, though I can play the files. Can anyone help me regards Marcel Tag: Problems with sending Movies by email Tag: 12611
  - 15
    - Replacing video with slide show Can someone please help me find the "least expensive" software that will allow me to replace video while continuing to hear the audio associated with that video. In other words, I have a video clip of my father discussing his early life. While he is talking, I want to fade into still pics of his early life. This is not like a narration where I would add voice to a series of still pics, but rather the opposite. Replacing the video while leaving the audio I was told that WMM might do this, but I have not been able to figure it out if it does. If it will, I would appreciate any assistance you might be able to provide. If it won't, does anyone know a software package that will. I have been told that Adobe Premiere will do this, but have not checked it out due to the cost Thank you for an assistance. Tag: Problems with sending Movies by email Tag: 12609
  - 16
    - MM2- Click Play= Class not registered Updated to MM2. Not sure if is completely installed or not. Followed instructions at papajohn's and in KB Article 825229 about copying files from C:\WINDOWS\RegisteredPackages\{60BFF50D-FB2C-4498-A577- C9548C390BB9}. And there has been no change in performance. Running XP Home About MM2 Screen give this information Version 5.1 (Build 2600xpsp2.030422-1633:Service Pack 1) Windows Movie Maker Version 2.0.3312.0 Two major problems--- I am unable to play clip, storyboard or timeline. I have imported clips from winter pack, transitions, some of my own photos and audios- I drag them to the storyboard, click Play Clip or Play Storyboard and get nothing in the preview screen. When I click the any of the buttons on the preview screen I get a popup that says "Class Not Registered". What does this mean and how do I correct it? Also, when I try to record a narrative- nothing happens. There is nothing in the device box, and no choices in the drop downs- microphone works in other applications- Any help to get this up and running sure would be appreciated. Thanks. Tag: Problems with sending Movies by email Tag: 12603
  - 17
    - titles & Effects When i get the insert screen for titles and type the he firts letter, moviemaker shutdown. Is there an fix for this? Tag: Problems with sending Movies by email Tag: 12600
  - 18
    - i have bought Nero and want to create dvd's of my home movies and stuff. i have bought Nero and want to create dvd's of my home movies and stuff. what i am stuck with is, what format to i have to store them on the cdr's? is it MPG or can i store them in WMV (Window Media Player) or do i have to have something else done before it goes to the cd? the original files are in WMV that i have made up with Window Movie Maker version 2 hope someone can help me with this. thanks in advance J Tag: Problems with sending Movies by email Tag: 12592
  - 19
    - minor audio issues I posted a few days ago but did not get a response. Was hoping papa john or cari might have a suggestion.I have some static and a few hickups in the audio portion of movie when I have saved to avi file. Does not matter if song was up loaded or ripped. Does not happen in every song and seems to happen with transtions. I have a pent 4 and the sound card is intergrated in the mother board. Do I need a better sound card? I de frag before each save and most everthing is turned off in the background. Any ideas? Tag: Problems with sending Movies by email Tag: 12578
  - 20
    - No Sound On Movie When I export a movie from my digital camera the sound is played back to me from the video camera but when I start making my movie in Windows Movie Maker all the sound has gone.Does anoybody know why this is beause I have obviously recorded the sound for it to be played back to me in the first place. Kelly Tag: Problems with sending Movies by email Tag: 12571
  - 21
    - Movie Maker 2 With MM1 I was able to convert VCD to WMV.Please let me know whether Can I do the same with MM2. Tag: Problems with sending Movies by email Tag: 12569
  - 22
    - capture analog questions I am sorry for the dumb questions, but I feel like a dolt. I just began reading this board and find that everyone is well beyond me in understanding WMM. I need some basic knowledge I want to copy videotapes (VCR and those created with a Canon Hi8 ES2500) to DVD. No editing at this time, but that may come later. My PC â?? Sony RZ32G â?? has USB, and video connectors - S-Video, Composite audio/video, and S400 (IEEE 1394) port. I can even input a TV signal I guess â?? donâ??t intend to try. But it doesnâ??t look like it has what I need to do the job. Do I need to ADD a â??capture deviceâ?? of some kind since it appears that I have only analog tapes to deal with? Must I upgrade my video card (NVIDIA GeForce4 MX 440 with AGP8X (Sony))? Are there alternative ways to go? Suggestions/recommendations? Thanx, Lee Tag: Problems with sending Movies by email Tag: 12567
  - 23
    - can't save movie file hi, i'm doen with my project. I was trying to "save movie file" to my computer and/or recordable cd but it does not succeed. It says that I have to check my destination drive and source file if they are still available...and they are What seems to be the problem? Thanks. Tag: Problems with sending Movies by email Tag: 12566
  - 24
    - Video Capture I want to capture video but I only have audio options. Does anybody know how I can change my settings in a different manner. (keep in mind I only get audio options not video) Do I need to use a firewire to capture or can I use a USB port Who ever helps out I thank-you in advance. Tag: Problems with sending Movies by email Tag: 12565
  - 25
    - Capturing Profiles cannot be found Hi everyone, I just uprgraded my win xp home edition to xp pro. Installation seemed to go fine. However, when I try and capture a video from my cam, I get the following error..... "Capturing profiles can not be located". can anyone out there tell me what this means and how do I fix the problem. I reinstalled my usb driver, but the error still pops up. was it a mistake to upgrade from xp home edition to xp pro???? TIA Arthur Tag: Problems with sending Movies by email Tag: 12556
- Next
  - 1
    - Newbie Questions... I'm a bit confused...being new to the whole video editing\creation thing, I just got started with Windows Movie Maker 2 today by using still pictures to put together a slide show with music and some effects. That's been going fine.. My questions are about saving - it looks like 640x480 is the max resolution that a video can be saved as. Is this correct Now, that size is fine for viewing on my computer, but what about television? I'm not sure how computer resolutions translate into TV viewing. I have a 42 inch television. Would the video fill the whole screen, or just a small window? Would it be a mess (stretched and pixelized?) Of the save options, which are actually the best quality (once you choose to pick manually and not let windows pick)? The options they present are a bit confusing. Are higher kbs always better? (Assuming local viewing and not trying to make web friendly)? "High Quality, Large" isn't very informative If you want a FULL, super-high quality copy for archive, what option would that be Oh, on other question, this one about Audio Is there any way to trim an audio clip, then make it fade out instead of ending abruptly Thanks Tag: Problems with sending Movies by email Tag: 12555
  - 2
    - 16bit to 12bit audio capture I have a DV tape recorded in 16 bit. When i capture it with MM2 the picture is fine, but there is no audio This problem can be prevented by recording onto DV tape in 12 bit sound But i have a particular tape that is 16bit, of which has sound i would like to capture, any ideas? Tag: Problems with sending Movies by email Tag: 12554
  - 3
    - playback hang-ups Went to papajohn site very informative but no luck for my particulars which are Video captures fine from my sony mini DV cam and saving back to mini DV gives good results as well. Its the editing and MM clip playback on the MM2 monitor pane that is very unstable and sometimes results in the infamous error report. I should add that the audio is played back without interuption, its really only the compressed video file (I think MM2 call this a movie maker project file) that seems to have the problem in stability, meaning when i play back the (edit in process project file) timeline it almost seems that the graphics card (in my case a graphics adaptor intel 170) is trying to catch up with the speed of the video images, the result of course is a highly unwatchable product. I checked the codecs through the XP direct diagnostic tool and did not see any that matched ones listed at papajohns site.I also tried the settings on the accelerator but to no avail. I should also add that MM2 does save the last edit when there is an error crash (hang-up), a window comes up asking me if I want to retrieve the lost data, so eventually I can finish the edit but what a pain. Anybody have anything new to add? Papajohns comments are always aprreciated. hilowathome Tag: Problems with sending Movies by email Tag: 12553
  - 4
    - MM 2 hangs after import of .mpg OK, I've read many posts & PapaJohn, I've done your check list. But I cannot resolve this: I've used MM2 before (made a 20 min pix/video presentation 2 months ago) However now I've started a new project. It involves still pix's, mp3 audio and .mpg. I've inserted my title, added several still pix, but when I add an .mpg (maybe 10-15 sec. long) MM2 freezes. It will not play the clip. If I save the file right after I add the .mpg then exit the program, it will allow me to add another clip. But if I try & play the entire clip it freezes. (The .mpg clips are imported from another source - not using MM2 to create the .mpg) Oliver Peters Tag: Problems with sending Movies by email Tag: 12549
  - 5
    - answer I have the same problem with freezing MM2.I think When MM2 overloaded-it freezed.Also i cannot make CD or taped my annimationts on hard disc when file is more than 5 min.So. i split it in parts(till 5 min. each)and tape it on hard disc or burning CD.IT happend,specially,when i do the annimations:700 pictures, 3Mpixeles each one-the length of the movie.While working with the movie the pc freezes a few times,so,i have ti use Alt-Ctrl-Del to run againg MM2.It takes a lot of time!But now, i work bit slowly with MM2(waiting for finishinng of every step of command)and time to time to restart of my computer helps to refresh the RAM memory and defragmention of the hard disc makes the peformens of MM2 better.MM2 is good Movie Maker,but i shoudn't buy it while having free downloads of it.But ,till now,i see that MM2 is more progressive Movie Maker to compare with another MM.And i'm going on with using it,because I can create annimations with photo's,that is not possible whith another programms i know.Be patient,MM2 will be upgraded(i hope) Success.Andrey Tag: Problems with sending Movies by email Tag: 12548
  - 6
    - video device Movie maker is only detecting my logitech web cam as "Available Device" - I can not get it to detect my video camera. The strange thing is - if I disconnect the web cam - then my Panasonic will appear in the Imaging Devices in the Device Manager. But with the web cam installed the Panasonic only appears under Universal Serial Bus Controllers in the Device Manager. Does any one have any suggestions. Both are USB if that helps.I am running a Sony System and am new to XP. Any help would be greatly appreciated. Thanks. Tag: Problems with sending Movies by email Tag: 12547
  - 7
    - KB828026 Can any one tewll me why it is not possible to install fix KB828026? Tag: Problems with sending Movies by email Tag: 12544
  - 8
    - No Help Menu, transitions or effects After I downloaded Movie Maker 2 I imported pictures and ready to add transitions and effects Can't find them The Help menu can't be found on C drive. Can anyone help please Thank Yo Sarasamsgram Tag: Problems with sending Movies by email Tag: 12542
  - 9
    - will save in low bit rate but not at high (just pics) I've brought in a bunch of images (say 600), i have no trouble saving as a movie as long as the bit rate is set to something like 50kpbs. Set it to 2.1Mbps and it 'has trouble saving'. Plenty of memory and diskspac no audio, no transitions, only still picture What gives? Tag: Problems with sending Movies by email Tag: 12539
  - 10
    - Wont Capture I recently purchased an new PC with Windows XP Media edition. The movie maker recognizes my Canon ZR camercorder. When I click the start capture button the camera beging playing but the preview screen remains black and no video is being captured. The stop capture button stops the recording. The cameral control buttons under the preview window also work This is an older camera and have tried the NTSC setting as printed on my camera but the same results as above Any help would be appreciated Thanks. Tag: Problems with sending Movies by email Tag: 12538
  - 11
    - White rectangle in middle of wmv Hi Does anyone know about problem of getting a white rectangle in the middle of a wmv that is captued from a vhs video which is input from video source. Thanks Ray Tag: Problems with sending Movies by email Tag: 12536
  - 12
    - not self-extracting I've downloaded the newer versoin 2.0 from the website but the file will not extract. The self-extracting file is in the program files and prompts you through all commands for installation, but after you click the final "finish" prompt, it does nothing. I can't figure out how to get the file open. I can only open the other Windows Movie Maker I already have. HELP!! Tag: Problems with sending Movies by email Tag: 12535
  - 13
    - transfering .wma files into .mov files from Windows Movie Maker 2 Hey I am making a CD Yearbook for my school and it only accepts .mov files and i want to transfer .wma files into .mov files from Windows Movie Maker 2, so how do i do this with out buying Quick Time Pro Echo Tag: Problems with sending Movies by email Tag: 12534
  - 14
    - cant save to cam With MM2 on XP i was used to make movie and save it back to my sony DV cam. Since my last movie i have installed a lot of thing on my computer. Now, i can import and make movie but when i save on the DV cam i have blue screen on the cam, even with a 5 sec movie. When i save in DV format on my HDD it works fine, but not on my cam. I have read and tried all tricks on papajohns web site without success My QASF.dll is uptodate and have no older version. please, any idea ? Tag: Problems with sending Movies by email Tag: 12533
  - 15
    - DigiCam .avi files sound garbled in slideshow Does anyone know how to fix the problem with MM2 not being able to include clips from your digital camera into the slideshow? I tried several different ways to try to import the clip, but all with the same undesired results. Help! Tag: Problems with sending Movies by email Tag: 12532
  - 16
    - .avi files captures video but garbles the sound I have an XP with MM2 and it works fine for slideshows using jpeg files, but when I incorporate my avi files off my Powershot S230, the video comes out fine, but the sound is all garbled. I can play the avi files on Media Player fine. I even tried the sample movie on MM2 and it plays fine. What happened? Can we not include digital camera video clips into the slideshow? Any help would be appreciated. My laptop is a Dell Latitude P4 2.4GHz 40GB HD, CD-R. And I have Roxio CD Creator 6 Platinum. Tag: Problems with sending Movies by email Tag: 12531
  - 17
    - Movie Maker 2 and other software I use two different movie creators: Studio 8 and MM2. I was wondering if anyone else uses 2 different programs to edit movies. I use Movie Maker 2 for the titles and credits. And I use Studio 8 for DVD out put, names/titles on the clip, and to edit the movie. Tag: Problems with sending Movies by email Tag: 12527
  - 18
    - help i dont no how to capture with mm2. i have a samsungscd23/d24 mini dv. like when i put it on camara it records the stuff i point it at but when i put it on play it dosent work.. Email me Tag: Problems with sending Movies by email Tag: 12526
  - 19
    - Movie Maker 2 Hang up I am about at my wits end -- and I have contacted Microsoft, and they won't talk to me without paying since my Windows XP Pro is "OEM"; and since MM2 is a part of the operating system, whether it works or not, I need to contact the OEM. Now, since MS seems to know little about MM2, (witness the Knowledge Base corrections list), OEM will know even less. What happens: It will only capture a few frames of video from my camera, then hangs up. It access the camera, via firewire cable, (IEEE 1394), properly, rewinds the digital tape in the camera, then says it is capturing the image. I watch the movie on the camcorder, and then stop the capture after a few seconds (10 or so). Then it says creating the file, and HANGS up. I get, maybe, a few frames, about .1 - .4 seconds ( 1/10 - 4/10 sec.) of capture. I also have tried monitoring and not monitoring the capture on the computer, but makes no difference. MM2 will not then restart without restarting the computer (other computer functions are OK without restart). I have contacted Sharp, and the only software they have is the driver for the SD card in the camera for downloading still photos, nothing needed for the firewire interface. Yesterday, I talked with MS and had sent to me (email) a 'Hotfix', KB826377. The Sharp model number specified in the Hotfix was not for my camera, but thought perhaps the article was not totally current, and that other Sharp camcorders might be affected. Mine is the Sharp VL-Z5U. No difference after installing the Horfix. I also did the following: Microsoft Knowledge Base Article - 825229 http://support.microsoft.com/default.aspx?scid=kb;en- us;825229 (a Microsoft goof). My computer has 1 GB memory, has a 2.5 ghz P4 processor, and 103 GB of available hard drive space; plenty of capability. ANY THOUGHTS.?? Thanks in advance for your help, Don Tag: Problems with sending Movies by email Tag: 12523
  - 20
    - Converting Home Video to DVDs What is the best way to organize my files (both project and source files) while I am converting our home video on VHS tapes to DVDs? I would like to make one DVD for each year's worth of home video. I have an 80 GB hard drive but cannot store even one year's worth of captured video on my hard drive. Do I have to make several projects for each year? How would I store the projects and source files until it's time to burn the DVD? Thanks for any insight you might have! Tag: Problems with sending Movies by email Tag: 12516
  - 21
    - CONNECTING MY CAMCORDER I GOT A SAMSUNG SCL810 CAMCORDER AND I'VE BEEN TRYING TO CONNECT IT TO MY PC USING THE S-VIDEO CABLE. MY QUESTIONS IS ANYBODY CAN TELL ME STEP BY STEP HOW TO DO IT .... Tag: Problems with sending Movies by email Tag: 12498
  - 22
    - remove MM2.0 I need to uninstall Windows Movie Maker2 from Windows XP Home. Tag: Problems with sending Movies by email Tag: 12493
  - 23
    - movie sound ive got the hang of recording sound to go over the clips ive put together, but can anyone tell me how to get rid of the original sound from the clips. im getting both sounds coming through on top of eachother and it sounds like a mess. Tag: Problems with sending Movies by email Tag: 12490
  - 24
    - How can I use WM8 codec? I need to create movies using Movie Maker, but have to use the WM8 rather than WM9 codec. Is it possible to change the codec? Have not found a way, and currently have to encode to WM9 first, then re-encode to WM8 which is by no means ideal. Tag: Problems with sending Movies by email Tag: 12486
  - 25
    - No titles appear I've been trying to att titles (in the begging, at the end of movies) but I can't see them, except for two line moving overlay Anyone with the same prblem or solution? //Azrim Tag: Problems with sending Movies by email Tag: 12485

Hello,
I am sending movies by email and
when they go they are recieved the
audio is cutting in and out and the video
is a little choppy.PLEASE HELP 1st time user.
magoman@aol.com

Top

Re: Problems with sending Movies by email by Cari

Cari
Fri Feb 27 14:14:54 CST 2004

EMail attachments usually have a 1mb limit, so the file you're creating is
going to be a REALLY low resolution which may have the results you describe.

Better to burn to CD and snail mail the disk.

Cari
www.coribright.com

"magoman@aol.com" <anonymous@discussions.microsoft.com> wrote in message
news:08fe01c3fd6a$8b1e5f10$a601280a@phx.gbl...
> Hello,
> I am sending movies by email and
> when they go they are recieved the
> audio is cutting in and out and the video
> is a little choppy.PLEASE HELP 1st time user.
> magoman@aol.com

Top