Plays only on CD-RW?

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Playing files My WMM used to play fine. Now, it will play a clip or group of clips once. When I try to continue play after pressing stop or rewind, the clip will not play. Sometimes the counter will move but I always get a black screen. Also, I can no longer switch to full screen mode. Tag: Plays only on CD-RW? Tag: 10066
  - 2
    - mm2 distorts sounds or won't play at all I have been working on a mm project for my family that is using strickly pictures (no movie clips) and sound. I was using .wav files and everything was working fine. When I came back to the project a few days later only 2 of the 20 sounds I used worked properly. The rest either played at 2-3x the speed or it just sound like a squelchy white noise. I found that the 2 sounds that did work were mp3's. Soooooooo, I changed my sounds to mp3s' but excluding the 2 mp3's that originally worked all the mp3's are doing the same thing. I have tried everything that I can think of. I have made no recent changed to MM and infact updated it to MM2 to see if it would solve the problem, which it didn't.......ANY HELP WOULD BE GREATLY APPRECIATED!!!! Tag: Plays only on CD-RW? Tag: 10065
  - 3
    - Titles and Audio Sync I insert titles into footage using mm2. All seems OK and I burn the project to DVD using MY DVD. When I view the finished DVD, one of the titles has made the audio on all the following footage to be out of sync, the same time delay as the length of the title. Take this title out and the sync is fine. The other titles cause no problem. I have experimented with different ways of inserting titles and the sequence of adding footage afterward, but can't work out why the difference! What is the right way to insert titles into footage? It is a pity this is not covered in MM2 Help. Would appreciate some help before I lose the will to live. Thanks Peter Tag: Plays only on CD-RW? Tag: 10064
  - 4
    - Freezing of project when saving I am not able to save a project as a movie nor save/record into dv. After about 20-25 minues the process freeze . How can I fix this problem? Only able to save files less than 300 MB. I have a 3.06gh / 60gb . If it is impossible to save larger files, how do I break up a project into smaller p.? Tag: Plays only on CD-RW? Tag: 10062
  - 5
    - Deactivation of audio clips When I paste an audio clip in MovieMaker2 in same time with original audio of video clip made with a DV camera, it seems to be impossible deactivation of the original audio. In the storyboard the original audio track appears deactivated (a line) but it can be always heard together with the inserted audio cli Is that a fault of mine or a software bug Thanks for any hel Lenn Tag: Plays only on CD-RW? Tag: 10060
  - 6
    - CANT SAVE!!! okay, instead of getting some lame stupid message saying i cant save.... nothing happens at all, i cant even access the options part of the menu, ive tried reinstalling, WHAT DO I DO! Tag: Plays only on CD-RW? Tag: 10055
  - 7
    - Can only play my movie on a rewritable drive? I have made a movie of my girls in venice and would like to send it to them. But I can only replay it on my CDRW drive. When I tried it on my CD rom drive it would not recognize it. I took it to a friends house to see if he could play it on his CD rom player. But he also could only play it on his CDRW drive. What am I doing wrong or what is the problem? Tag: Plays only on CD-RW? Tag: 10054
  - 8
    - Break Down I have a large home movie file, approx. 900MB, that I have made. Each time I attempt to save as a movie file before burning to a DVD movie maker stops saving. The movie records approximately 20 minutes, or less, and then only records audio after that. The video freezes on a particular clip. Each time the clip is different and can be within minutes of the others. I have 512MB RAM with a 2.6 GHz processor...is this a problem with the movie maker program and if so how can I fix it? Tag: Plays only on CD-RW? Tag: 10051
  - 9
    - No Audio I forgot to give my email address with post #1. When capturing to Windows Movie Maker, the audio will not record. I have another program (OHVIDEO) that does record audio, but it will not allow me to rercord to the camcorder. What do I need to do to correct this problem. Tag: Plays only on CD-RW? Tag: 10047
  - 10
    - importing AVI clips Is there any way to take separate .avi file clips and import them into a single collection. so far, whenever I do this, i get a separate collection for each clip Tag: Plays only on CD-RW? Tag: 10046
  - 11
    - Can't Import an MP2 file! Greetings When I try to import an MP2 file captured with my ATI card and ATI software I get this error from WMM2 "The file C:\Documents and Settings\Steve\My Documents\My Videos\Captured with ATI\movie.mp2 is an empty file" The file plays fine on the ATI software as well as NeoDVD. Even Windows Media Player will open and play the file although it plays a little jumpy I sure could use some help Thanks Stephen Tag: Plays only on CD-RW? Tag: 10045
  - 12
    - Help! My Windows Movie Maker has the immensely frustrating habit of shutting itself off during editing. I tried slowing down the acceleration, but no joy. I read elsewhere that I may have a codec issue, but though I've tried messing about with Zoomplayer, I'm not entirely sure what I'm supposed to be doing. I'm slowly losing the will to live so any advice would be very welcome. Tag: Plays only on CD-RW? Tag: 10042
  - 13
    - No Audio when playing back video I have my video camera connected to my computer via USB. I can record video fine but there is no audio associated with it even in playback. Is there something special that needs to be done to copy the audio along with the video? Tag: Plays only on CD-RW? Tag: 10040
  - 14
    - movie maker help The FBI has been harassing and mentally torturing me for two and half years since around Oct 01. The FBI has installed gps tracking devices in my car, tracked me like an animal, wire tapped my phone and has been monitoring all my web surfing activities for 2.5yrs and completely dehumanized me. The FBI agents have been following me 24X7X60X60 everywhere including grocery stores, retail stores, malls, restaurants and movie theaters. The FBI agents who were following me have at times verbally and racially abused me in retail store and grocery store parking lots by shouting at me inanities. One FBI agent once tried to ram into my car from behind with a comcast van and came within one inch of hitting me from behind. There was no traffic altercation between us and there was no traffic on the road. The FBI agent in the comcast van never tried to overtake me and was very angry at me and hated me for no reason. I have been unemployed for close to 3 yrs and When I send resumes to potential employers, the sadistic FBI agents who were monitoring my email and websurfing, have been badmouthing and assasinating my character with recruiters and jeopardizing my job opportunities for the last 2.5 yrs. The FBI has been interfering in my personal life for no reason. The FBI has completely destroyed and denied me any sort of privacy for 2.5 yrs. Each and every word I type and post on the web is being monitored and each and every email tapped. The sadistic FBI has forced me to live like a virtual prisoner for 2.5 yrs with zero privacy and 24 hr real time video focused on me. I cant talk to friends, family members and prospective employers without the fear of being over heard and recorded. I am afraid of doing everything and anything without fear. I am not a terrorist. I am not even a muslim. I dont have any muslim friends. I am not a drug smuggler. I did not kill anybody. I did not threaten to kill anybody. I dont have a record like gottis or escobars. I do not have any prior criminal record. Why should I suffer all this harassment and constant loss of privacy for such an extended period of time. I feel completely naked infront of the world and it has been like that for a couple of years. I am not familiar with US legal system that much. Can somebody tell me why the sadistic FBI has such ridiculous amount of power to harass and mentally torture me. WHy do the FBI has the right to think they are God and they are always right. WHy should my life depend on what the FBI thinks of me. Why should I be put through so much pain and suffering. Why do the FBI has the right to deny me privacy for so long. Who gave the FBI the right to interfere in my personal life and bad mouth and assasinate my character with potential employers. Why are the FBI agents telling employers not to hire me. As it is, it is very difficult to find a job in this economy and whatever few opportunities I get are being screwed by these fbi sadists. On what basis, the FBI installed a gps device in my car and tracking me like an animal. On what basis did the FBI wire tap my phone. On what basis did the FBI tap and monitor my web activities and email for 2.5 yrs. I feel as if I was put in a 6x6 cell with 24X7 video focused on me and fbi agents standing around the cell and constantly poking me with sticks. One undercover FBI agent sent an email and called me a dumbass. His email is sfrank9@aol.com and his ebay id is spodekmodek. Lot of FBI agents are harrassing me 24X7 in vehilces with michigan title plates UFX 210 (white SUV), XRA 155 (black car), BOGEY 27 (black car), PPL 587 (red car). Assume everything I said is true and somebody with legal knowledge and expertise help me out here. I do not have access to us.legal and misc.legal usenet news groups. I would appreciate if somebody can do a cut and paste this into us.legal and misc.legal news groups. Tag: Plays only on CD-RW? Tag: 10038
  - 15
    - No Audio When capturing video to Windows Movie Maker from a camcorder it will not record the audio. My other software will, but it will not allow me to rerecord to the camera. What can I do to solve this problem? Tag: Plays only on CD-RW? Tag: 10036
  - 16
    - PC will not recognise my camera Hi! I have a Panasonic DV camera that I want to hook up to my DELL Latitude. It has worked before, bit now suddenly it do not respond when attaching the FireWire cable. Usually it finds the camera emmediately. Anyone?? Fredrik Tag: Plays only on CD-RW? Tag: 10030
  - 17
    - Burning to DVD I made my first movie last night. I went to burn it to DVD on my Sony Burner and it says something about invalid format or file extension? It also says it need to be in NTSC or PAL format. Do I need to convert it somewhere next from .WMA format? Thanks in Advance Mark T Tag: Plays only on CD-RW? Tag: 10028
  - 18
    - Capturing Video After plugging the camera in & trying to capture video, it keeps coming up with the msg; "An interface has to many methods to fire events from" - what the hell does this mean? It wont let me do anything. Please someone help, i'm so frustrated! Tag: Plays only on CD-RW? Tag: 10027
  - 19
    - CES Announcements and MM2 The annual tradition of making significant announcements at the Consumer Electronics Show (CES) continues... on Wednesday Bill Gates made the keynote address to the attendees, Press Releases have been streaming out, and some websites are overloaded with traffic. ... so what's in it for users of Movie Maker 2? - here's two things I see: 1... The first of a new boxed 2-disc set of movies is now available for purchase. The movie is Coral Reef Adventure which was made for IMAX Theatres. The first disc in the set isn't that newsworthy as it is a standard DVD. But the second disc is a new WMV-HD disc (High Definition), which has two copies of the movie in WMV format. The WMV files have over 6 times the resolution of the DVD version. And the movie is really great. One copy is 1280x720 and runs smoothly on my laptop, which meets the recommended minimum CPU of 2.4 GHz. The other copy is 1440x1080 and doesn't run smoothly for me.... it needs the recommended 3.0 GHz CPU. For Movie Maker 2 users, I studied the parameters of the 1280x720 file and made a custom profile so I can take my widescreen holiday videos and produce them at those settings... the only thing I had to compromise on was the audio... MM2 is limited to 2 channel stereo and the disc has 5.1 sound. I put a copy of my custom profile on the website and updated the Saving Movies > Custom WMV Profiles page with some info and a link to it... 2... DVD players that support the WMV format are on the horizon for April... I updated the CD Burning > HighMAT page of my website and included a few links... The error message when clicking on the Apex link seems due to '... the amount of traffic exceeds the Web site's configured capacity...' _________________ PapaJohn www.papajohn.org Tag: Plays only on CD-RW? Tag: 10026
  - 20
    - Movie file too big to copy from hard disk I have created an edited movie that is almost 15GB... my hard drive is a 30GB and I can't create enough temp file space to copy the movie over to a DVD or DV-Camera... My questions are these: 1. Is there a way to compress the original capture file to a smaller size than the 15GB? 2. The eidted master file for the movie is only 1.5GB (about 50 mins of content) ... is there someway to delete the original capture keep the edir file and then 'compress' the original capture. 3. I've tried freeing disk space but I don't have enough resident on the C: drive... I have an external drive E: that can hold 120GB. Can I use that as a temp storage swap drive? 4. I can't even copy the original capture to my external because it's just too big to come out of my laptop... any ideas will be greatly appreciated as this project took me 4 days of editing and I'd hate to start from scratch... P.S. - If I do have to start over what is the largest 'safe' file to work with? Tag: Plays only on CD-RW? Tag: 10024
  - 21
    - "A video capture device was not detected...." why? Shiney new Sony PC-RS430G, everything works as advertised...save for MM2. When I select "Capture Video" MM2 simply responds that "A video capture device was not detected...". There aren't any controls (that I can find) that allow me to teach the darn software about the fact that I do have a video capture device... that works just fine with "Sony" applications (which generally suck badly). Tag: Plays only on CD-RW? Tag: 10023
  - 22
    - Stupid question, annoying problem....help? Everytime I try and open files that I am editing in Windows Movie Maker, it will load the project but whenever I go to play the movie or do anything to it in any sense...Windows Movie Maker closes! It doesn't close when I play files that I've captured and have in my "collections" but it instantly closes whenever I attempt to do anything to an edited project. Argh! What am I doing wrong? Please help someone, this is so frustrating! Thanks very much = ) Tag: Plays only on CD-RW? Tag: 10022
  - 23
    - CODEC - Where I can get it to play MPEG2? WMM won't import mpg video.. It says I don't have CODEC??? Tag: Plays only on CD-RW? Tag: 10021
  - 24
    - movie Made a movie with windows movie maker how do transfer it to DVD form windows I have roxio DVD burner Tag: Plays only on CD-RW? Tag: 10018
  - 25
    - Help with editing audio in mm2 needed - please I have created a project with a series of video clips (with audio) interspersed with the odd title page and still photo. What I now want to do, is to overlay some audio/music soundtracks that only play during the title pages or over selected stills, allowing the sound of the video to play when they come into view. Therefore, I'm looking at being able to set the audio/music to fade out when it comes to a selected point, the video/audio comes in at this point, then the music audio fades back in at the selected point, which would be at the end of a video section. However, I do not want to keep re-starting the same music/audio at the beginning, basically, I want to mute or pause the music at certain points for specific durations. It seems a basic requirement to me but this is the first time I've done anything like this and I can't find a way of doing it. Can it be done and how? Many Thanks Steve Tag: Plays only on CD-RW? Tag: 10017
- Next
  - 1
    - CAPTURE PROBLEM I just purchased a new dell 8300 with movie maker. When I attempt to capture via my vcr, it says device is not responding, close down any application that may be using the device. I'm not using anything else. I have Prime Time on my computer was told to shut it down and reboot but that doesn't help. Tag: Plays only on CD-RW? Tag: 10016
  - 2
    - Movie Maker crashes When I attempt to "Save Movie File", Movie Maker crashes, and it also crashes whenever I do anything with the storyboard / timeline Tag: Plays only on CD-RW? Tag: 10015
  - 3
    - "Unspecified Error" when opening MM2 When I try to open Movie Maker 2 or Microsoft Producer 2003, I get an "Unspecified Error" message and the application fails to open. The problem seems to be specific to my Windows XP profile (i.e. when I'm logged on as someone else it works fine), but this presents a significant problem to me. Has anyone seen this problem? It must lie in some shared component between the two applications. Thanks. Tag: Plays only on CD-RW? Tag: 10014
  - 4
    - movie maker in XP i downloaded some footage which i took with a SONY DIGI CAM ..and i success fully got them into my system which is PIV,128 MB RAM,60 GB hdd 1.7 ghz mpc... till now i have been taking experimental footage with creative web cam and just trying to learn how to edit movies etc which has never given me any problems...but the footage that came from the SONY DIGI CAM...i have multiple issues to report.. 1.the footage take's a whole lot of time to run. 2.the footage takes life time to get edited. and.. 3.when i finally get the footage edited and open choose the option save movie it give's me an error - to check if the source file location is valid (which it is )and check if there is enough disk space(60 GB'S!!) --I need to know if there id any thing wrong with my PC...AND IF i need to upgrade ram etc ... i am getting a handy cam soon so please guide me... rgrds iqbal yaqub Tag: Plays only on CD-RW? Tag: 10012
  - 5
    - compressing the mpegs well first of all can mpegs be used to make movie in movie maker...the source is a sony digital camera... i have mpegs abt max 6 sec long and i will have closer to hundred such scenes... this would mean 600 mb or more than that... a five minute movie and i do not think i can get this across seven seas back to india in any way ... any ideas ??? Tag: Plays only on CD-RW? Tag: 10011
  - 6
    - Flicking When looking at the TV using Windows Movie Maker there is a constant flicking on the screen and so recording is no good. Can you please help. Tag: Plays only on CD-RW? Tag: 10005
  - 7
    - virus After I declared my e-mail in this newsgroups I receaved messages containing virus from: "MS Net Message Storage System" <emailrobot@freemail.com> "MS Net Message System" <masterdaemon@america.net> "MS Security Assistance" <ljrfrkjyjmdw@news.microsoft.com> "Microsoft Corporation Customer Assistance" <astwknciuebrxz@ltybu.com> At least it was what my e-mail provider have warned, and put those files in quarentine. Users, please be aware and I hope Microsoft would verify this trouble. Thanks Tag: Plays only on CD-RW? Tag: 10004
  - 8
    - MovieMaker I am Unable To Save My Movie. After I completed My Movie I hit save to my computer all it does is mount up the time. This problem is the same on all the computer in my home.How do I go about uninstaling Moviemaker and reinstaling it. There isn't any error message it just freeze up. Tag: Plays only on CD-RW? Tag: 9997
  - 9
    - MM2 movie skips during title pages on DVD, problem not present in preview Ok, I've made several movies in MM2, they look and sound great in preview on MM2. I am saving them as DV-AVI files and using Roxio ECDDVDC to burn to DVD. When I preview the movie in Roxio, it looks fine. However, the movie on the DVD stalls, and stutters (including audio cutout, dropped frames, etc.) during titles. If the titles are animated the problem is worse. I exported the movie back to my camcorder and it played just fine, however, when I re-imported the movie from the camcorder into a new MM2 project and burned the resulting movie, it had all the same problems the first dvd had. I have no problems with audio cutout or skipping during transitions, and again, everything looks fine, even when previewed in roxio. Tag: Plays only on CD-RW? Tag: 9995
  - 10
    - Repackage MovieMaker 2 I have a problem repackaging MovieMaker 2 into MSI. When installing I get a logagent.exe error message. Is there any workaround for this? Tag: Plays only on CD-RW? Tag: 9991
  - 11
    - DV capture freezes -Hotfix?- When trying to capture video VIA firewire from my Sony DCR-TRV230 to Movie Maker the video preview freezes after several seconds and it stops capturing, even though the camera rolls along as if it's still working. I've looked at Papajohn's pages, tried a few things to no avail. Here's the thing: MS has a "Hotfix" on this page: http://support.microsoft.com/default.aspx?scid=kb;EN- US;830363 This is reportedly a "confirmed problem" for XP with SP1 and DirectX 9- my configuration. But I have an OEM version of XP Home, so apparently they want to charge me money for this "Hotfix." Is there any way to aquire the hofix without shelling out more $$$ to MS? Any kind soul out there already download it and willing to share? Many thanks! Tag: Plays only on CD-RW? Tag: 9990
  - 12
    - problem sending back to dv camera I edited a video clip with sound the size of the file is 37 meg , I'm using a 8mm digital camera. when doing a 5 minute video clip it transfers it ok no problem but when doing a 10 minute video clip it comes up saying it was not successfully recorded into the tape. any ideas? Tag: Plays only on CD-RW? Tag: 9989
  - 13
    - only audio, but no video in timeline playback A few weeks ago I posted this: Whenever I try to play the full timeline back in MM2, it plays the sound but doesn't display the clips or titles. (It won't even preview title text whilst I'm setting up a title). However, it will play both the sound and pictures for individual clips from the collection before I place them on timeline. The timeline only has a couple of very very short clips, so there shouldn't be a length/size of clip issue. The same computer also still has MM1 on and will successfully playback the timeline in that version. and I received this reply: If they are MPEG2 clips, it's probably a codec issue. The clips I've tried are a WMV's but I've also tried with avi files & still have same problem. Have installed WMP9 for Windows XP, but still no joy. Other ideas welcome! Tag: Plays only on CD-RW? Tag: 9988
  - 14
    - Uninstalling Movie Maker in WinXP Home I want to be able to uninstall Windows Movie Maker from Windows XP entirely and keep Windows XP Home from restoring those files automatically. How do I do that? Tag: Plays only on CD-RW? Tag: 9986
  - 15
    - Movie Maker Capturing Video when i try to capture video using movie maker, the preview pane is distorted as is the final captured footage. I have service pack 1 and DirectX9, and read somewhere that there was a Hotfix, but dont know where to get it Help tid2305@yahoo.co.uk Tag: Plays only on CD-RW? Tag: 9985
  - 16
    - Installation problem I've dowloaded Movie Maker 2.0 to my PC but when succesfully completed and I try to run the program it states "Runtime Error! This application has requested to terminate it in an unusual way. Please contact the application support team for more information." I've also tried to go into add/remove programs to run a repair but I cannot find Movie Maker in the list. Many thanks. Tag: Plays only on CD-RW? Tag: 9983
  - 17
    - Problem with the Windows Movie Maker 2 When I will add an effect to one of the imported movies (in Movie Maker 2) the program closes! Therefore I can't make a movie with effects and that's a big problem !! I hope you'll solve my problem as soon as possible. Danny Christianse Here's my mail so you can write the solution to the problem, thank you danny_christiansen@hotmail.co Tag: Plays only on CD-RW? Tag: 9981
  - 18
    - HighMAT DVD Players This is a multi-part message in MIME format. ------=_NextPart_000_0115_01C3D52D.0EB7FF90 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable A press announcement today about products being unveiled at CES includes = one about players supporting HighMAT. Two new Malata players will be the first to add WMV video support to the = audio and still pix support.=20 I've updated the CD Burning > HightMAT page with some info and links to = the press release and Malata home page. What I don't see yet is any = target date for availability of these players. Continue to be careful... the press release first covers new Panasonic = and Apex models, but the text tells you that they support audio and = still pix (which means they don't support video WMV files). PapaJohn www.papajohn.org ------=_NextPart_000_0115_01C3D52D.0EB7FF90 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2800.1276" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT face=3DArial size=3D2>A press announcement today about = products being=20 unveiled at CES includes one about players supporting = HighMAT.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>Two new Malata players will be the = first to add WMV=20 video support to the audio and still pix support. </FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>I've updated the CD Burning > = HightMAT page with=20 some info and links to the press release and Malata home page. What I = don't see=20 yet is any target date for availability of these players.</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>Continue to be careful... the press = release first=20 covers new Panasonic and Apex models, but the text tells you that they = support=20 audio and still pix (which means they don't support video WMV=20 files).</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>PapaJohn</FONT></DIV> <DIV><FONT face=3DArial size=3D2><A=20 href=3D"http://www.papajohn.org">www.papajohn.org</A></FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV></BODY></HTML> ------=_NextPart_000_0115_01C3D52D.0EB7FF90-- Tag: Plays only on CD-RW? Tag: 9980
  - 19
    - video freezes audio continues I made a slide show with digital pics using Movie Maker and added several songs. It plays ok on the timeline and I saved it to a CD and to my computer. I played the CD using Media Player 9 and it works good for about 3/4 the show and then stalls on a pic but the songs keep playing. It does the same thing with the file I saved on the puter. What am I doing wrong? The whole slide show is about 30 minutes in length and works fine for about 15 minutes then starts acting up. Tag: Plays only on CD-RW? Tag: 9979
  - 20
    - Movie Maker Effects Does anyone know where i can get some new free effects for movie maker like rain etc. Any help would be appreciated. Thanks, Chris Grant Tag: Plays only on CD-RW? Tag: 9977
  - 21
    - Movie Maker 2 will not add titles....anywhere adding titles is straightforward...but cannot add titles. I enter text...click add...nothing happens. I am running win2k and xp on two machines....same problem. Have tried several movies....just cant add titles. Transitions, sound, etc. are no problems. Ended up putting title into Word, saving as HTML, then importing the graphic and pasting into movie. Works well but is a hokey way to do it. Tag: Plays only on CD-RW? Tag: 9975
  - 22
    - Date/Time How can i record date/time on my video? Tag: Plays only on CD-RW? Tag: 9970
  - 23
    - Done everything to upgrade MM2 I've tried all the fixes i can find on the web to upgrade to MM2. I had it on my computer after I upgraded to XP and I had some problems with XP. Reinstalled XP and since then I can't upgrade to MM2. I tried the article Microsoft 825229 to upgrade and I keep getting a notice to the program has not passed Windows Logo testing and it won't let me install the MM2 program....can anyone help??? Thanks in advance... Dave Tag: Plays only on CD-RW? Tag: 9964
  - 24
    - playing back movies/bad quality I've created a movie in WMM2, however when i play back the movie the quality of it is awful. Especially when i use a full screen. Any suggestions? Tag: Plays only on CD-RW? Tag: 9963
  - 25
    - efects bug My WMM is closing automaticly as I clic on efects, transitios or titles and credits. It started this way some months ago and I dont know the reason. i instaled again several times and nothing helped. please help me. Tag: Plays only on CD-RW? Tag: 9962

I recently made my first movie with movie maker2.
I saved the movie to my hard drive. Then burned the movie
to my CD. When I tried to play the movie in my CD-R the
drive would't recognize it. It kept requesting for a CD
to be installed. But when I put it back in my CD-RW it
work fine. I took the CD to a friends computer and his
CD-R would'nt read it but his CD-RW would. What is the
problem?

Top

Re: Plays only on CD-RW? by Hywel

Hywel
Sat Jan 10 18:11:01 CST 2004

In article <015301c3d7ce$05aa0850$a401280a@phx.gbl>,
anonymous@discussions.microsoft.com says...
> I recently made my first movie with movie maker2.
> I saved the movie to my hard drive. Then burned the movie
> to my CD. When I tried to play the movie in my CD-R the
> drive would't recognize it. It kept requesting for a CD
> to be installed. But when I put it back in my CD-RW it
> work fine. I took the CD to a friends computer and his
> CD-R would'nt read it but his CD-RW would. What is the
> problem?

You haven't finalised the disc.

--
Hywel I do not eat quiche
http://hyweljenkins.co.uk/
http://hyweljenkins.co.uk/mfaq.php

Top