MOVIE MAKER 2

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Fade to black? PapaJohn said: Put a black still picture in the timeline and you can overlap it with the clip as long as you like. ---------------- Sounds like a plan. But where or how does one acquire a 'black still picture' and how does one 'overlap' a clip? I've been under the impression that dragging the left/right handles will not lengthen/shorten the timing of the clip. Tag: MOVIE MAKER 2 Tag: 4121
  - 2
    - I can't send movies in E mails I installed a Samsung Digimax V4 camera and can send photos no problems in media. To start with everything worked fine, and I was able to send small video clips by e mail with movie maker. I now appear to be stuck on one particular movie, shot in may. Now, although I can load clips I've taken onto my own PC , any movies at all that I try to send, (even to myself) come out as this one particular movie dated back in May. I cant get rid of it. Even though the file properties show the new clips, when I send them , they still turn out to be this same one. The only possible explanation I can come up with is that in mid may, I got Movie maker updated to movie maker 2, I cant remember where from. I've a feeling the trouble stems from then. Is there a patch I need, or should I do a system restore back to may, as I dont know how else to remove Movie maker2. I'd prefer to uninstall MM2 rather than do a system restore. please advise me. Tag: MOVIE MAKER 2 Tag: 4118
  - 3
    - editing- video and audio not in sync Hi! I posted yesterday because I couldn`t pause while editing without crashing. Now I have since downloaded Direct X 9b, It seemed to better the situation although I still can`t slide the slider to a later part of the clip and have the video and audio in sync. If i move the slider I get the audio of the new location but not it`s image or just one still image. please help thank you luc Tag: MOVIE MAKER 2 Tag: 4117
  - 4
    - To: Papa John (Re: Please Help... Soon!) ok i tried that but every time i try to "send file to camera" it says "DV10 MFC Application has encountered a problem and needs to close. We are sorry for the inconvenience." Any help? Also... JVC called back and said the problem might be with the fire wire.... they said: "maybe incorrect settings with the fire wire... time code - set dropframe 29.97 sps" but i've been looking and so far i've found no way of accessing my fire wire (Acoustic Research, IEEE 1394, 4 pin to 6 pin) settings. Any help? Please! >-----Original Message----- >Yes > >"Eric" <ef_7@hotmail.com> wrote in message >news:056001c366ae$ce7dcf00$a601280a@phx.gbl... >> Ok so I save the movie file to "My Computer" >> and then use DVIO to send it to my camcorder. Is this >> correct? >> >-----Original Message----- >> >The export to camera process is the most demanding on >> your computer. Defrag >> >your hard drive and turn off other apps as you do it. >> > >> >Or, maybe save it to a DV-AVI file on your hard drive >> first, check to be >> >sure the file isn't fragmented, and use the DVIO utility >> (Camcorders... >> >General page of www.papajohn.org) to transfer it to >> your camcorder. >> > >> >PapaJohn >> > >> > >> >"Eric" <ef_7@hotmail.com> wrote in message >> >news:048201c3669f$1b6b83d0$a401280a@phx.gbl... >> >> Ok!!! Big Problem!!!! My friends and i recently got >> >> together for a reunion, i recorded the events with my >> JVC >> >> Digital camcorder, with MiniDV, model no. GR- DVL320U. I >> >> promised everyone that I'd edit the footage with my >> >> computer, VAIO Windows XP Home, PCV-RX755. I transfered >> >> the files to my computer, with Movie Maker 2 Video >> >> Capture Wizard, using AR Acoustic Research proseries II >> >> IEEE 1394 4 pin to 6 pin cable. I edited it using Movie >> >> Maker 2, but when i transfered the finished product >> back >> >> to my camcorder, the audio had breaks in some parts >> >> making the quality really bad. We've experienced this >> >> problem before and were told to send it to get cleaned, >> >> but the problem was only temporarily fixed. We tried >> >> contacting JVC, but they've been not very much help. >> >> Someone please help! >> > >> > >> >. >> > > > >. > Tag: MOVIE MAKER 2 Tag: 4115
  - 5
    - Terrible video output & green screens on clip library Hello, First, thanks to Papa John's fixes page, I was able to keep WMM2 from crashing constantly when trying to use an effect or transition. Thanks! Secondly, I have a huge problem. My video output is terrible. The only way I can describe it is to say it looks like a 3 year old went wild with fingerpaints. :> I have uninstalled codecs (Nimo Codec Pack), I have recompressed any clips I'm using into mpegs, I've defragged, upgraded to DirectX 9.0b, Windows Media 9, and still I cannot make WMM2 stop rendering my finished movies into... crap. Most of the time I can't even make out the difference between the scenery and the people in the clip (but the audio is just fine, which indicated to me that it was a video codec... which is why I uninstalled everything). As if that weren't enough, most of the clips in my clip library (which I have set to thumbnails) are green. They were green before I uninstalled the extra codecs, and after. I'm beginning to wonder if WMM2 is just designed to give you poor results if you're not using proprietary media from Microsoft. Tag: MOVIE MAKER 2 Tag: 4114
  - 6
    - unable to install movie maker Hi, I have a problem installing windows movie maker. I used to have this program installed but somehow lost it on my computer. I've tried to install it again from Microsoft.com but failed. The file moviemk.exe is nowhere to be found on my computer. Does anybody have a suggestion on how to solve this problem? Thanks! Sandra Tag: MOVIE MAKER 2 Tag: 4111
  - 7
    - How do I improve Picture Quality Someone please tell me if there is a way to improve picture quality in movie maker. I tried making a movie with pictures I had burned to a cd from a photo developing website. Looking at the photos they are beautiful, but when I import them into movie maker and play the movie on full screen they are of very poor quality. Is there a way to fix this? Tag: MOVIE MAKER 2 Tag: 4110
  - 8
    - Movie Maker Sound Can i control the sound of an imported music file during the middle of a movie? ie: i have imported a video of a person talking and a music file into the timeline. when the person is talking in the middle of the movie clip, i want to fade out or lower the volume of the music file playing so you can hear what the person is saying and then raise the music volume back up after they are done talking. is there anyway to do that? thanks for your help Tag: MOVIE MAKER 2 Tag: 4107
  - 9
    - MM2 projects Hi All-- I have saved multiple projects that I'd like to now combine into a final movie. Should I render each project to a final movie and then stitch them together, or is there a way within the "project" settings to do it a better way? Thanks. Ed Tag: MOVIE MAKER 2 Tag: 4100
  - 10
    - Win XP Movie Maker 2.0 hangs when I'm editing every 1-2 mins....not responding. At first I thought it was this Mm20ex.inf problem and wasn't intstalled but I could not find the file..and I see that under "about movie maker" it's 2.0 SP1 update...so I'm not sure now! Any ideas?? Blueslady, Tag: MOVIE MAKER 2 Tag: 4099
  - 11
    - moviemaker 2 fade in and out I need to be able to control the amount of time it takes for a fade in or out. Do's moviemaker 2 have the ability to control it. I need to be able to fade out very slowly Tag: MOVIE MAKER 2 Tag: 4098
  - 12
    - Once I pause can`t restart in editing mode Hi! i import a video file. I put in the sequential table, start it and then pause it. Then try to restart. Won`t happen. Will crash or take a very long time. I tried to re-download the program from Microsoft. Still having same problem. Please help. Thank you Luc Tag: MOVIE MAKER 2 Tag: 4097
  - 13
    - please help....soon Ok!!! Big Problem!!!! My friends and i recently got together for a reunion, i recorded the events with my JVC Digital camcorder, with MiniDV, model no. GR-DVL320U. I promised everyone that I'd edit the footage with my computer, VAIO Windows XP Home, PCV-RX755. I transfered the files to my computer, with Movie Maker 2 Video Capture Wizard, using AR Acoustic Research proseries II IEEE 1394 4 pin to 6 pin cable. I edited it using Movie Maker 2, but when i transfered the finished product back to my camcorder, the audio had breaks in some parts making the quality really bad. We've experienced this problem before and were told to send it to get cleaned, but the problem was only temporarily fixed. We tried contacting JVC, but they've been not very much help. Someone please help! Tag: MOVIE MAKER 2 Tag: 4089
  - 14
    - Please Help Me, Papa! I desperately need to make copies of my presentation from windows xp movie maker, which can be played on older versions of windows. Please help me. Hunter Laizure Tag: MOVIE MAKER 2 Tag: 4081
  - 15
    - QASF.DLL while trying to capture a movie with movie maker 2 i recieved an error that said mm had to close.When i looked in the event viewer the report it said Faulting module qasf.dll version 9.0. I also noticed i could not manually capture any video.the size of the file would stay at 3Kb but the minutes would pass. I had a look at papajohn.org bit it only said about updating the dll file om 6.0 to 9.0. Any help appreciated. Tag: MOVIE MAKER 2 Tag: 4075
  - 16
    - White bar obscures clips - MM1_XP-VHS Some VHS video feeds to MM1 are obscured by a horizontal white bar filling the middle 1/3 of clip image. In one case this occurred with every second clip ; in another every third clip and in another all clips were clear. All clips 'run' ok with sound but the white bars obscure the clips for short while. Has anyoone any idea what may cause this intermittent problem? TIA Tag: MOVIE MAKER 2 Tag: 4071
  - 17
    - Some VHS d/l clips obscured by horizontal bar in MM1 I have just got started and have d'l three VHS videos into MM1 - All works well EXCEPT - in one case a white horizontal bar obscures the middle 1/3 of every second clip and in the other case obscures every third clip.In the third case there is no bar at all and it works perfectly. When the "barred" clips are run they respond correctly with sound and motion and the white bar seems to disapear automatically after a moment of clip running. I have to experiment further; however has anyone experienced this phenomina??? TIA russ Tag: MOVIE MAKER 2 Tag: 4070
  - 18
    - 1394 video capture with Sony MICROMV IP-55 I have just upgraded my Digital Video Camera from a Sony Handycam to a Sony MICROMV IP55. Neither movie-maker or the Sony supplied Pixel software recognises the 1394 connection. It is fine on both SW packages for the Handycam. When I look on the hardware profile the Handycam is recognised as an imaging device but the MICROMV is listed as a multifunction device in the Sound, Video games listing. Trouble shooting just asks question on audio Anyone know what could be wrong I have tried to re-install and on 2 computers but with same result Both are running Windows XP Richard Tag: MOVIE MAKER 2 Tag: 4067
  - 19
    - mm2 stop responding When using mm2 it stops responding. Doesn't do it all the time and if I let it sit for awhile it will start running again. I talked to other people who have said that they have the same problem. Is there a fix for this problem? Tag: MOVIE MAKER 2 Tag: 4065
  - 20
    - more info on my problem my camera is a sony dcr-pc100 when i try to finish/save movie to dv camera there is NO error message, nothing. the "next" button can be clicked over and over -- the window does not freeze. i have checked my task manager after clicking "next" and all that is going is system idle -- so i know nothing else is operating. i captured the video in dv-avi format. i also captured video in .wmv yet neither work to save back to my camera. though i can save both to my computer, not a problem. thanks, stephanie Tag: MOVIE MAKER 2 Tag: 4063
  - 21
    - exporting movie back to DV camera i can save the movie to my computer -- not a problem, yet when i want to save the movie back to my camera nothing happens. i click on "next" and nothing. nothing freezes, it's as if that function is turned off, or something. this is the same camera that i capture video from without a problem. help? please. thanks, stephanie Tag: MOVIE MAKER 2 Tag: 4061
  - 22
    - Movie Maker 2 When I burnt my movie to CD it played back on my external DVD player witch is connected to my TV, the movie played back OK but the sound was out of sinc about 10 seconds. My DVD is new and it can play back almost any format even WMA and Jpeg files. Can you help? where am I going wrong?. Kind regards Len. Tag: MOVIE MAKER 2 Tag: 4054
  - 23
    - Weird .wav issue Hey there Papa John ... got one for ya: .wav files play fine in the player, from the Collections area, but when I drop 'em into the Audio track, they screech like wailing banshees! What gives? Which stupid .ax file makes that happen. Heeeeellllllpppppp! Tag: MOVIE MAKER 2 Tag: 4053
  - 24
    - Re: Weird Freeze on Exporting to DV Hey, I try to export a movie I created on the moviemaker, and it begins to compile everything, and sets up the camcorder to record back to the DV, but after a few mins, everything just stops. The program doesnt freeze, and i always end up just cancelling the entire exporting process. After that, moviemaker shuts down, and brings up a weird error notice, but I only saw it once, cuz I realized that after the program shut down, I lost about 10 GB's worth of free disk space. I'm sure it disappeared while it was compiling the video...but I don't know where I go to delete this compiled video and get back my disk space. Can anyone help me out here? And what's wrong with my Moviemaker? Tag: MOVIE MAKER 2 Tag: 4042
  - 25
    - moviemaker hangs using belkin usb 2 videobus I am using the belkin usb videobus 2 with a Panasonic PV- A206 video camera. The problem is that when I go to capture using moviemaker 2 it hangs and I have to reboot the computer. I do not get the video in the preview screen. Any help would be much appreciated. Thanks Wes. Tag: MOVIE MAKER 2 Tag: 4041
- Next
  - 1
    - Audio and video are out of synch The clip looks just fine when I play it from Collections. However, when I play it from the storyboard, it looks like a bad lip synch. Even worse, the video portion is clipped at the right spot, but the audio keeps continuing for a couple of seconds, including messages that I don't want included. Please help....It's for a meeting on Thursday! Tag: MOVIE MAKER 2 Tag: 4037
  - 2
    - Splitter I have had problems with MM2 and a conflict with a splitter l renamed 2 .ax files as suggested earlier and this stopped the error report and closure of the program however now l cant view the clips in the viewer but can hear the audio and any suggestions :)) Tag: MOVIE MAKER 2 Tag: 4036
  - 3
    - Distribution I have made a presentation on MM2 with XP. I need to put it on to CD's that anyone can view. If I get software to save it as a MPEG1 file, and burn it to a VCD, will someone with windows 95 and newer be able to put it in and play it without problems? Would they have to download a codec, and if so, could you make it download immediatly if connected to the internet when they play it? I truly appreciate you taking the time to read and answer my questions. Thank you, Hunter Laizure Tag: MOVIE MAKER 2 Tag: 4033
  - 4
    - How Do I Save Project to a DVD Format Completed a project with Movie Maker and can not save to a DVD format. How do I do it??????? Paul Tag: MOVIE MAKER 2 Tag: 4027
  - 5
    - Date to display on recorded movie. I have video that is imported into a collection. It has time and date properties that the picture was taken using a digital video camera. Video was filmed with the time and date function on. When I prepare the movie the time and date are NOT on the screen as filmed. Anyone have any ideas? Thank you Eldon Fields Tag: MOVIE MAKER 2 Tag: 4026
  - 6
    - Importing music How do I import music into my videos? I have saved music in my Media Player, but the Movie Maker won't let me import them music because of licensing issues. How do I get arround this? Tag: MOVIE MAKER 2 Tag: 4024
  - 7
    - Saving avi files makes jerky images Dear all, I want to record home-made movies to DVD. In the Video setting panel of the wizard, if I click on Digital Device Format (DV-AVI), the recording and playback are very jerky (both image and sound). This doesn't happen for the WMV setting. With a Pentium 4 2.26Ghz and 736Mb RAM, I am told the issue is possibly a conflict. How can I find it or resolve the irritating jerk, please ? Many thanks, Eddy Tag: MOVIE MAKER 2 Tag: 4007
  - 8
    - Saving movies in other formats Hi, When you finish making a movie it automatically saves as a .wmv file. Is there anyway to change this setting so you have the option of choosing the type of file it is saved as (ie I want to be able to save it as an M-PEG or something like that) Please email me ... Thanks in advance Andrea Tag: MOVIE MAKER 2 Tag: 4001
  - 9
    - MM2 crashes on me constantly, without any error messages or warnings... I was wondering if anyone else has had this same problem, and if so, whether there is any known patch or fix for it. I'll just be sitting there, doing my thing, and out of nowhere the program just shuts down. No error messages, no slow-down... it just crashes, nice and clean. When I go back into the program, all my work is obviously gone. This will ussually happen some 2-3 times straight, and on about the 4'th or 5'th time, my comp will freeze. But like I said, there doesn't seem to be any proglem with my computers resources. On the contrary, when the program is working, it works perfectly. It's just that it crashes and freezes on a regular basis. Am I alone here, or is this a known issue? Thanks in advance for any and all help. Tag: MOVIE MAKER 2 Tag: 3996
  - 10
    - MM 2 - Titles & Credits I've been using MM2 for some time now and never had a problem with titles and credits. Suddenly when I do the titles or credits all I get is a black screen and nothing else. Does anyone know how to fix this? Dodie Tag: MOVIE MAKER 2 Tag: 3995
  - 11
    - Newspaper transition Hi all, A couple of mnths ago I used a program that had a ' turning newspaper headline' for a transition. But I lost that program. Is there one out there that I can use with MM2? Thanks, Tjip Tag: MOVIE MAKER 2 Tag: 3989
  - 12
    - dvd Can any body help. Iam trying to copy from my dv camcorder to dvd with no joy. I can copy onto cdr but not dvdr. Tag: MOVIE MAKER 2 Tag: 3980
  - 13
    - Saving Movie to Camcorder I saved my movie successfully to computer and CD-R with good playbacks. However, when I try to save to DV camcorder (Panasonic NV-DS38), I get respnse: " Movie not recorded successfully to tape. The project contains source files that are missing or that have been modified after import. Your project cannot be saved as movie until the source files have been located or deleted from the project". I have checked my saved project and, as far as I can see there are no missing source files, nor any that have been modified. I am unable to save the project or movie as ".avi" as I don't get this option. Only ".mswmm". My movie file is 596MB and 1hr16mins long. My camcorder is in LP mode. Thanks Tag: MOVIE MAKER 2 Tag: 3979
  - 14
    - Microsoft Sale Computers ,Software,Hardware,Visual,Gaming Microsoft Sale Computers ,Software,Hardware,Visual,Gaming http://microsofthelper.itgo.com/ From $15.99 - up Computers,Note Books,Software,Hardware,Gaming,Visual,PDA's and more Free shipping and handling for a limited time! Brand new store! GREAT COMPUTER DEALS! http://microsofthelper.itgo.com/ Tag: MOVIE MAKER 2 Tag: 3972
  - 15
    - Microsoft Sale Computers ,Software,Hardware,Visual,Gaming Microsoft Sale Computers ,Software,Hardware,Visual,Gaming http://microsofthelper.itgo.com/ From $15.99 - up Computers,Note Books,Software,Hardware,Gaming,Visual,PDA's and more Free shipping and handling for a limited time! Brand new store! GREAT COMPUTER DEALS! http://microsofthelper.itgo.com/ Tag: MOVIE MAKER 2 Tag: 3971
  - 16
    - Display color on the borders of my programs have changed Hi, I am running XP Professional and I recently upgraded to movie maker 2, I also set up an in home wireless network. Every thing appears to be operating correctly. But, now all my microsoft office programs be have changed color. And its only the borders of the programs too. I have not changed any display settings. Example- Outlook, Internet Explorer and Excell now have a pink hue to them--just on the borders of the program. The monitor settings are OK too. Its a flat pannel View Sonic I am sending this from my lap top and the borders on IE and this computer are light gray...the way my desk top used to look...Can anyone help with this? What did I do? Thanks Tag: MOVIE MAKER 2 Tag: 3969
  - 17
    - Sending to camcorder, not enough time Hi, I have a 17minute movie i made from my trip to mexico, and im trying to put it back on the camcroder to i can put it on tv, but the battery always runs out before it will finish putting to tape, it takes like 240min, but the battery only last 112minutes, is there any ways that i can get this to tape faster or what? i am using a sony camcorder Tag: MOVIE MAKER 2 Tag: 3962
  - 18
    - Color corruption Hi, I try to convert an .mpg movie into .wmv using MovieMaker2 that comes with XP. Unfortunately, red colors turn into blue colors with the conversion. Any suggestions? Cornel Tag: MOVIE MAKER 2 Tag: 3961
  - 19
    - PERFORMING NEWSPAPER TRANSITION How can i add a photo in the transition called "newspaper"?. I see there is a place for a photo, but a don't now how to do it. Thank you. --------- ¿Cómo puedo añadir una foto en la transición llamada "periódico"?. Veo que hay una sitio para una foto, pero no se ponerla. Gracias. Tag: MOVIE MAKER 2 Tag: 3957
  - 20
    - How do i delete sound from a movie I added sound to a movie i made. But the old music still plays in the back. How do i delete the old music? email me with the answer SableBomber38@aol.com Tag: MOVIE MAKER 2 Tag: 3954
  - 21
    - Oh man, do I need help fast. Movie maker isnt working!! Ok folks, I need some help and i need it fast. Wel, heres the problem. Basically windows movie maker isnt working. Heres the run down. Well, it was working before my bro last left it. So, I get on it today so I could record some home videos as my parents are going back home, tahts why so urgent. Well, I tried to basically capture it and put it onto my comp using the movie maker and a port from Dazzle(Dazzle digital video creator 80). So, I begin to capture but notice that the video is being captured but no sound. So, I try a couple times, restarting the comp a few times and nothing. Only video. So, I go on and check the cables over afew times, everything is right and up. THe light comes on and nothing. So, at the first screen after pressing the capture button(where asks you to choose ur devices), I pick a different audio device from the options and it was the Daaazzle audio device, to see if that would work. Well, it did go through, but it still only recorded video and no sound. So, I restarted again and when I went and pressed the capture button, where it has the device selection screen, as it ooens, a dialog box appears(not allowing me to choose any or change any devies, neither video, audio, etc.) and it says taht the device is not supported and prevents me from channging the device. So now, it wont even get past the devices box, because as I click ok in the warning box, the whole program goes back to the regular screen, unabling me to do anything. Can someone please help urgently. My parents leave in less than 2 days and I would really need it for them to carry back with them. Appreciate it, and thanks. Tag: MOVIE MAKER 2 Tag: 3953
  - 22
    - Movie Maker Effects Help Hi everyone, I sure hope someone out there can help sense Microsoft wont. Microsoft was better years ago but that's a deferent story. I am using Windows XP pro and Movie Maker with 2 upgrade. Every time I click on a video effect it terminates Movie Maker 2. What is needed? Please may someone have had this problem and fixed it? Email me at g_lundy@hotmail.com if you can help Thanks Greg Tag: MOVIE MAKER 2 Tag: 3951
  - 23
    - Earn $500 to $700 per Week Downloading FREE Software We know it sounds TOO good to BE true, but it?s REAL! Our International Technology firm will pay you hard cash each time FREE software is downloaded. Best of all you will only have to download ONE piece of software ONE time for FREE and you can be on your way to earning BIG! FIND OUT MORE BY VISITING http://JeromeMcCrea.PlugUsIn4Cash.com Tag: MOVIE MAKER 2 Tag: 3950
  - 24
    - Dazzle DVC 100 I was using a version of Movie maker that came with my windows XP. I was using a azzle DVC 100 capture device to convert my analog home tapes to a digital format. The first version of WMM waorked fine and capture the video and everthing was working so so. The WMM was unstable. I was able to capture and save, then when I went to edit the video, the WMM would crash. I reloaded WMM from the microsoft site and now the new versionof WMM does not recognize my capture device. The Dazzle unit connects to the computer via a USB port. I have reloaded WMM and I get the same results. Can some one point out what I may be doing wrong. Tag: MOVIE MAKER 2 Tag: 3947
  - 25
    - hollywood fx Can these fx be used in Movie Maker or only in Studio? Thanks. -- the reply e-mail in all newsgroup postings is a fake in an attempt to defeat spam bots. My true e-mail address is bosoxfan followed by the a in a circle followed by frontiernet dot net. Tag: MOVIE MAKER 2 Tag: 3945

I downloded WMM2 from the download site, how do I know if
its WMM or WMM2 on my computer. When I click help and
properties what should it say? thanks

Top

MOVIE MAKER 2 by Tom

Tom
Wed Aug 20 20:10:23 CDT 2003

When you click on "Help" and then "About Windows Movie
Maker" ... the display should say Windows Movie Maker
Version 2.0.3312, if you have the latest version.

I hope this helps.

>-----Original Message-----
>I downloded WMM2 from the download site, how do I know
if
>its WMM or WMM2 on my computer. When I click help and
>properties what should it say? thanks
>.
>

Top

MOVIE MAKER 2 by Scott

Scott
Wed Aug 20 20:33:32 CDT 2003

Thanks, thats what it says.

>-----Original Message-----
>When you click on "Help" and then "About Windows Movie
>Maker" ... the display should say Windows Movie Maker
>Version 2.0.3312, if you have the latest version.
>
>I hope this helps.
>
>>-----Original Message-----
>>I downloded WMM2 from the download site, how do I know
>if
>>its WMM or WMM2 on my computer. When I click help and
>>properties what should it say? thanks
>>.
>>
>.
>

Top