List of MM Codecs?

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - audio stops working half way into WMM(2.1) Hi. I previously converted my quicktime video files to avi., and they eventually imported fine into WMM however about half way into the video the sound stops. The video is still apparent however the sound is completely gone. Any ideas? I've been looking all over the site but I haven't found the answer to my problem. I'd appreciate any help I can get, thanks. Tag: List of MM Codecs? Tag: 27729
  - 2
    - CD-R, CD+R, and so on Whats the difference between blank disks that have the + and - ? Tag: List of MM Codecs? Tag: 27717
  - 3
    - Windows XP Media Edition Does the new Windows XP Media Edition have the software to encode files to play on a DVD player so I dont have to use third party software? Tag: List of MM Codecs? Tag: 27716
  - 4
    - Mpeg 1- Mpeg 2 -SVD- DVD ? When you make an SVD or a DVD with TPMG it converts it to an Mpeg 2 which the CDEasy program wont work with. CDEasy says it only uses Mpeg 1. Is there another way I can make it play on my DVD player in MPeg 2 so I can get better quality? Tag: List of MM Codecs? Tag: 27714
  - 5
    - produced dvd will not play properly Ihave taken all your advice which has been most helpfull,and now have managed to creat movie in mm2, save to file in avi and using tmpegnc have converted to m/peg2 and burnt to dvd using power producer which came with the computer . The dvd plays on my ronin p215f but both video and audio seem to stop and start as if in slow motion but not ,as if it jumps from frame to frame and audio , the disc will play on the computer ok. IT is a disc problem as it is the same on another player,is it the encoding ,or codecs, but i dont know about codecs, could it be the power producer should i get another burn package like nero what does anyone suggest that may help as i have spent days and nights trying in vein to sort this out. Iwould much appreciate any assistance that you can give ,why would the dvd jump aboutand stop and start? Tag: List of MM Codecs? Tag: 27712
  - 6
    - DVD Media I would like to dump some .avi files on my computer to DVD for viewing on a DVD player (DVD player is a Sony not in a PC). Which media should I purchase? +R or -R TIA TR Tag: List of MM Codecs? Tag: 27710
  - 7
    - Combine different movie files ?? I try to combine a few movie files taken separately. When I select the files that I want to combine with, the combine command does not appear active. How can I combine my splited pieces into ONE movie file? Thanks. Tag: List of MM Codecs? Tag: 27704
  - 8
    - Loosing Entire Audio / Music when using slo motion clips in AVI ou I am trying to make a Youth Sports highlight music video. If I try to export to DV-Tape or any AVI based file, I loose the entire Audio / Music part ONLY during the slow motion parts. Audio is fine any other time. I need the AVI based file to be able to burn a DVD. WMV versions run fine. I have captured the clips from my sony TVR740 thru sony DV-Motion via (1394) on a VAIO desktop. The clips I am having problems with contain parts of it in Slow Motion. (I play the cam corder tape in slow motion, and have DV motion capture it that way.) I then import the clip, (the video clip's audio naturally mutes when in the slo motion parts.) ( I have also tried to Mute the Video sound track without any improvement) I have imported a MP.3 music file for the Audio/ Music track. (Have tried replacing with a Wav file without any Improvement) Playback on the PC (preview) or to a WMV is fine. Surely someone else out there captures clips in Slo Motion. Help!! Thanks, G. Bray GBMOHR@aol.com Tag: List of MM Codecs? Tag: 27703
  - 9
    - Converting NTSC into PAL Hello, I created an NTSC VCD in the following three steps: 1. Captured and edited movie using WMM in DV-AVI mode. 2. Used TMPGEnc to create an MPEG-1 file specifying NTSC mode. 3. Used VCD Easy to burn an NTSC VCD. Now, I want to create an exactly same PAL VCD. Do I need to repeat step 2 also specifying PAL option, or can I just specify PAL option in step 3 in VCDEasy? Thanks, -Ritesh Tag: List of MM Codecs? Tag: 27688
  - 10
    - Convert Movie Maker Project Is there a way to convert a movie maker project from MSWMM format to an avi file format? I want to be able to save my movies onto a DVD. Tag: List of MM Codecs? Tag: 27683
  - 11
    - Digital Device Format I am trying to capture my videos onto my computer and want to use the Digital Device Format, but this feature is grayed out. Why would this by grayed out and how can I get this option to appear? Thank you, Tag: List of MM Codecs? Tag: 27682
  - 12
    - Slide show works now but poor video Thanx to Papa Johns posts I figured out how to make a slide show work from my DVD player. First I used the TPMG encoder to make an Mpeg 1 then I used the CDEasy software link I found on Johns web site. I was thrilled that it worked but the pics during the slide show are very poor quality. I use a 3.1 mp dig cam and the pics were taken on the lowest resolution setting. Could the low resolution setting be the reason for the poor quality? I can increase the resolution but then I only get about 20 pictures. It only has an 8 meg CF card and it only supports up to a 32 mg. Should I get a new camera that supports more memory and use it on the high resolution setting? Or......should I save the movie file as an DV-AVI file and then make an Mpeg 2 and then use the CDEasy softwware? Sorry, I know it's a lot of questions but this is my first day working with MM2 and I have alot of questions but I'll save them for another day. Thanx Papa John !! Tag: List of MM Codecs? Tag: 27681
  - 13
    - I found this great little site I found this great little site. I signed up two weeks ago and got 2 Disney tickets and this week they are sending me 2 Universal Studios tickets. Here's the link http://66.219.102.40/ and by the way I am a real person, this is my real email address. I'm not a spammer and didn't appreciate the nasty email I got last time I tried to post this link. Thanks, Lisa http://66.219.102.40/ http://66.219.102.40/ Tag: List of MM Codecs? Tag: 27680
  - 14
    - Movie wont play on DVD player I made a slide show movie using .Jpg files and .MP3 files. I saved it to the computer then burned it to a CD-R. The problem is it wont play on my DVD player. The DVD player is High MAT compatible and High MAT is enabled. I did manage to get a slide show movie to play with no music but I want the music too. Should I change the format to PAL instead of NTSC? Or is their something else I need to do? Tag: List of MM Codecs? Tag: 27679
  - 15
    - export as .mpg i was wondering if there is a way to export as a .mpg file from MM2 to make a DVD. Thanks in advance JMSG Tag: List of MM Codecs? Tag: 27663
  - 16
    - Movie Maker - Error Message PROBLEM: I keep getting the following error message when attempting to use Movie Maker 2.1 to catpure VHS to DVD - " THE VIDEO DEVICE CANNOT BE USED A THIS TIME BECAUSE THERE HAS BEEN AN ERROR WHEN STARTING THE DEVICE:. OBJECTIVE: To record my old VHS tapes, full length, to DVD for safekeeping and also to create MPEG-2 movie clips from these VHS tapes for import/editing with mixed photo/video productions. BACKGROUND: I have a Dell XPS Media Center packaged PC. I have Media Center Edition (MCE) 2004 with the ATI e-Home Wonder PCI TV Tuner card installed. I am wired from ny VCR's (JVC HR-3912U) S-Video OUT to the S-Video IN on the tuner card and the L/R Audio OUT is wired to the tuner card with single stero jack. The VCR is wired to my cable box using the appropriate S-Video & L/R Audio wiires to receive TV programs (RF is disconnected). After starting MCE MyTV, I receive pciture/audio just fine so I assume nothing is wrong with the tuner card. I recently downloaded Service Pack 2 which inlcuded the Movie Maker 2.1 PRODEDURES I FOLLOWED LEADING UP TO ERROR: 1. I started Movie Maker 2.1 ok 2. I selected the Capture from Video Device wizard 3. Under [Available devices:] I selcted [ATI e-home Wonder Capture ICON] 4. Under [Audio input source:] I selected [Anolog Mix] 5. Under (Video input source:] I selected [S-Video] 6. I enterred the file name to capture video. 7. After hitting NEXT the above error message appears. I have tried the above procedures several times all resulting with the same error message. Thats it ! Thanks to whoever can help with this one. F. Brown Tag: List of MM Codecs? Tag: 27662
  - 17
    - Restore deleted wmv I need to restore a deleted wmv file for my movie to work because I didnt realise that the clips wouldnt work without the media player file. So, Im in a bit of a pickle here. Anyone no if this is possible? I emptied the recycle bin so Im afraid that the computer has used the file already but I ave not yet defragged. I ran an undelete program in vain so I am really stuck now. Any assistance would be appreciated. Thanks. Tag: List of MM Codecs? Tag: 27661
  - 18
    - usb2 I have just bought a JVC camcorder with USB2 is this as fast and as good as firewire for capturing video. I am a newbie. Regards.Tom..... Tag: List of MM Codecs? Tag: 27658
  - 19
    - Saved Video - Negative Color ?? I have a Bt848 based video capture card. Old and unsupported now days. But i works none the less with DScaler and seems to work ok with Widows Movie Maker. I've been able to capture video, the video in the preview and playback window appear ok, proper color etc - inside the Movie Maker program. But when I save the captured AVI / Movie or look at the AVI directly with WM9 Player the video is a negative ( or appears to be ) of the original. Suggestions ? I'm stuck, trying different color compression schemes with no success. Thanks, birch Tag: List of MM Codecs? Tag: 27656
  - 20
    - Help when I try to import a video, it says I don't have the required "codec"... Tag: List of MM Codecs? Tag: 27655
  - 21
    - Y does WMM2.1 run sloer than b4 sp2? Help Me! Tag: List of MM Codecs? Tag: 27648
  - 22
    - Movie Maker Locks UP Question Subject: Movie maker Locks up while Making Movie 11/19/2004 4:55 PM PST By: Greg In: microsoft.public.windowsxp.general Was this post helpful to you? (No) :( Help Please I have made a couple movies I have made and sent 1st one. However I have recently retired from the military.And I was working on my last drill movie with the National gaurd.I have the movie downloaded and am working on the story board and transitions.I had this problem once before before I reformatted.Now here it is again I have a new Dell XPS all the upgrades here is the fault message I copied from the advanced system information (Fault Log) Friday, November 19, 2004 Applicatio n Hang Fault bucket 115810024 . Not sure if that helps but I hope someone can help me out.I had 22 years in the service was over in Desert Storm and Sheild....my Gaurd Unit is getting ready to head back to Iraq 12-18 months...I felt pulled to serve again but my wife and Kids said no...Soooooo anyhoot sob story aside i really would like to get this fixed Movie Maker is great and easy I just cant figure out why it locks up on me.Ohh I can be E-mailed at greghall53@msn.com.Respectfully Greg Hall -- Gregory A. Hall -- Gregory A. Hall Tag: List of MM Codecs? Tag: 27647
  - 23
    - MM2 Doesn't See the Disc I've successfully created a movie in MM2 (first one ever) and want to burn it to a recordable CD. The issue I'm having is that when I click 'Recordable CD', I get a message that there is no disc in the recordable CD drive. I've placed a brand new CD-R in the burner and I know the burner works because Roxio will burn to it all day long no problem. I've checked the recording properties of the drive to make sure that it has the check box for 'Enable CD recording on this drive'. I'm stumped at this point. Any suggestions would be most appreciated. Tag: List of MM Codecs? Tag: 27645
  - 24
    - Sharp VL-Z3U Viewcam WMM won't recognize my camera when connected via USB. Camera manual only describes downloading still images to computer via USB, says nothing about video. It is a mini DV cassette type camera. Any suggestions on how to get camera recognized? Tag: List of MM Codecs? Tag: 27644
  - 25
    - My collection files are missing! Hey... sometimes when I start up mm, my collections have disappeared - they don't show up in the collections box at all. But when I go to movie files I've saved, works in progress, the movie clips I used for them show up on the timeline. What's going on??? Tag: List of MM Codecs? Tag: 27642
- Next
  - 1
    - VIDEO TS Files Which software is available to load VIDEO and Audio _TS files into Movie Maker? Thank you -- bulach Tag: List of MM Codecs? Tag: 27639
  - 2
    - Post Movie Maker Creations There are a lot of people that are having problems with the Movie Maker. Is there anyone that has had sucess using the program. I know I have! It took a while to figure it all out, but it is a wonderful program that has opened my eyes to a whole new adventure using Windows XP Pro. I challenge anyone to present their movies to the world. I have posted several of mine to a site called "The Kellys". It is a great feeling to have anyone be able to view my creations and comment on them. You can too! It's free and it's awsum. Give it a try, you won't be disapointed. I dare you. Visit: http://www.the-kellys.org/. SW Tag: List of MM Codecs? Tag: 27638
  - 3
    - Error when starting the device I am unable to capture footage when conecting my panasonic MV- GS200 via my firewire port. this port is part of my Sound Blaster audigy 2 card. Now i am able to capture video by using other programs. even using the video capture wizard it reconizes my camera but comes up with the following message "error when starting the device." any advice out there -- woody Tag: List of MM Codecs? Tag: 27633
  - 4
    - Crap Quality Hi There, I am capturing video from my sony hc40e camcorder via USB. I have tried capturing in many formats and all are pretty poor. They are ok in a small window. When I burn movies to a DVD they are absolutely crap. Is this just because USB cant to this well enough? How do you get a normal DVD quality output? Am I going to have to invest in Better hardware? Thanks Mal (Ireland) Tag: List of MM Codecs? Tag: 27632
  - 5
    - Very Fast (3-4x) Capture Speed When capturing digital video from my Sony Digital Handicam 730, I am trying to capture and work as DV-AVI so I can have the best quality and burn DVD's. When using this setting, the video is captured at 3-4 times the correct speed. When I capture at the "High Quality Video" setting, the video captures properly. I am running Windows XP SP2 on a 2.8 mhz PC with 1GB of RAM and over 30GB or empty, unfragmented disk space. I am capturing through the built-in firewire (IE-1394?) port. - Why would these two formats capture differently? - How can I get it to capture properly at the DV-AVI setting? - Will the High Quality Video setting work for preserving the original quality for future editing, DVD recording and viewing both on a PC and a TV? Thank you! Tag: List of MM Codecs? Tag: 27631
  - 6
    - Sony Handycam 201 Has anyone used a Sony Handycam 201 with WMM2 ? I am A newbie and I do not know how to get started. I am running XP SP2 on a HP XG922. TIA Tag: List of MM Codecs? Tag: 27630
  - 7
    - Can I Can i save my movie,in such a way that i can play it on a DVD player? -- HMRT MOTORSPORTS Tag: List of MM Codecs? Tag: 27627
  - 8
    - Why Does The wmv size get so big ? In a new project I import two wmv screen-capture clips made with Media Encoder, each is 270K. I drag both onto the timeline, add a simple title, fade-in and fade-out for each clip, no audio, music. I save the movie using the "Best Quality" setting. The original 270 k clips are full-size renderings of excellent quality. The Movie Maker output wmv is 18 meg, half the size or the originals and of poorer video quality. What am I doing wrong here? All I really need to do is tring these two wmv screen captures together into one clip - I can do without the titels and fade. Tag: List of MM Codecs? Tag: 27619
  - 9
    - quick help needed, timeline was shrunk physically, can't see transitions I put together a movie with variuos transitions into other clips and stuff. I saved my file closed wmm2. When I came back, the time line was so small. Where before 8 minutes was my whole program screen wide (at 1200 resolution) now it's 16 minutes wideand I can barely see the transition icons so it's hard for me to edit the short clips. Please help asap. Tag: List of MM Codecs? Tag: 27608
  - 10
    - Help in saving the movie ANYWHERE!! We have been working on saving a project with little success. We did send it to the DV camera and copied to VHS tape but had to add a black tile at the beginning of the project because the vcr cut off the first few seconds of the movie. We added a 5 second black clip to the project and have had no luck in trying to send it back to the camera again. Keep getting the msg that it now exceeds the 4 gigabyte limit supported by the current system, FAT32. ??? ugh. Please someone help. Tag: List of MM Codecs? Tag: 27593
  - 11
    - Not able to save anywhere I have been working on saving a project for about 2 weeks. I have poured through the support page and followed all advice. We were able to send the video to a dv camera last week and then copied to a VHS tape. When it copied to the VHS it cut off the first few seconds so we added a black frame at the beginning of the project and have tried to send it again to the camera to tape it but now it gives the msg that it is too large. What is going on here? That one little 5 second clip could not have made that big of a change. Please help someone! ugh. Tag: List of MM Codecs? Tag: 27592
  - 12
    - Capture in DV-AVI mode produces choppy audio I have a Panasonic PV-GS200 digital camcorder. When I capture video into WMM2.1 in the DV-AVI format, the video quality is excellent, but the audio is very very choppy. Capture in any other format produces good audio, but the video is (understandably) nothing compared to the DV-AVI format. I really want to work with the DV-AVI format as I don't want to compromise on video quality. I have a 1.7GHz processor, 768MB RAM, have installed Windows XP service pack 2. So, I don't think system configuration could be a problem. Please help! Thanks. Tag: List of MM Codecs? Tag: 27589
  - 13
    - Part of a project to camera Hi everyone, Is it possible to put just part of a movie project on the camera? There is one section I want to see how it looks on film but I'm not ready to put the entire project on the camera yet. I couldn't find anything in help that referred to this nor could I find anything in Papa John's book. Thanks If someone can help me, Roger Tag: List of MM Codecs? Tag: 27584
  - 14
    - SP2 causes MM2 failure? Hi all, Here's my case: Prior to installing SP2, I had MM2 working just great with my PCI 1394A card and Sony DVR. No problems at all. After installation of SP2 the 1394A card appears in the Device Manager correctly. However, no matter what I do I can get MM2 to recognize my Sony DVR. I keep getting a message to the effect that no device was found. I've tried everything I can think of. Moved the 1394 to different slots, etc. Here's the rub: I didn't install SP2 on my wife's computer also running WinXP. So I moved the 1394 to her machine and downloaded/installed the latest MM2 version. It works like a charm. So the only difference I found so far is SP2. Granted we have different MBs and versions of XP -- I use XP Pro; she's XP Home. The 5 driver files in SP2 are different in every detail except name. Different dates and file sizes. So the drivers have changed. I've read postings by other people having the same problem --- but no solutions. Somebody out there must have an idea of what's going on. Microsoft seems to not really give a rip -- IMHO. Thanks ahead! Don Tag: List of MM Codecs? Tag: 27579
  - 15
    - Input device not recognized I'm using a Sony XP PC which came with Movie Maker 2.1 preinstalled. My camera is an older (5 years or so) Sharp DV which has no digital outputs; my output cables are a choice of the three RCA type plugs or an s-video cable. I've tried both of these with no luck. I do know that things are working because I can successfully make videos with Sony's Click-to-DVD. Problem is, Click-to-DVD isn't as feature rich as Movie Maker. I do have SP2. I thought I'd try uninstalling M-M but it doesn't show up on the uninstall window and I'm reluctant to just find the file and delete it. To me, my DV camcorder should look like any other VCR and I don't see why I should have a problem. I did try importing a movie file created by Click-to-DVD and it made it but a little quirky - I can play the video OR the audio but not both at once. Thanks in advance for any help you may provide. -- Rick in El Paso Tag: List of MM Codecs? Tag: 27578
  - 16
    - firewire/1394 computer card I need to purchase a firewire card for my computer. In my reading I see that I can purchase either a 400 or an 800 card. I'll be using this with Windows Movie Maker and a Panasonic 3ccd mini dv camcorder. Which card do I want? Thanks, Tag: List of MM Codecs? Tag: 27577
  - 17
    - creating 56K and ISDN videos for the web I have MM and just updated to MM2. I recently received an mpeg file which plays beautifully on my computer (HP Media Center) and yet when I attempt to convert and save as a 56K or ISDN video to post on a website, the video plays very blurred as though the pixelation has changed. Any advice on how I can save these files so that the pixelation stays like the original mpeg, but converts in a streaming format for 56K users and ISDN users? Thanks! Lynn Tag: List of MM Codecs? Tag: 27576
  - 18
    - Saving Into Movie! Please Help! hello, i thank any one in advance for their help. i have been spending most of time doing a crucial movie for some of my family and relatives. i decided to make in in Movie Maker 2, since i had already worked with it. i know most of the things of MM2 and i can get around pretty good, but this time that i tried to make this movie, something really bad happend. After i finished my whole project and continusly saving all my work, i tried to save it into a movie... by going to file and then to make movie. I have done this before and it works perfectly but this time, it will do nothing now. I follow all instrunctions correctly and when it gets to the progress bar where is shows what percentage it has recoreded, it just takes an eternity with the message "Estimating Time". At first i thought it was a memory problem, but i look at the lights in front of the computer and they are flashing but not very often...( i'm pretty sure its not crashed because i can still move anything else, but the MM2) This has me real mad because i needed this movie to be done yesturday and was not able to do. i just want to try to get it to work now. does any one have any ideas on what is goign on? i will appreciate any help i get greatly!! By the way think it may have to do with something from Service Pack 2 since i made my last movie when i didnt have it installed and it work, but now it doesnt. Tag: List of MM Codecs? Tag: 27564
  - 19
    - A question to Rehan Rehan, Have been following this Newsgroup for some time and am still confused ! I have, using Photo Story 2 and 3, created Window Media Audio/Video files, WMV My difficulty is transferring these files to a CD As I read it from one of your posts, if I downloaded Nero Ultra Edition 6 , would this do the job for me. At present I have Nero Express Many thanks....Mike Tag: List of MM Codecs? Tag: 27562
  - 20
    - Breakpoint When I try to run movie maker 2 I get this error warning. The exception Breakpoint A breakpoint has been reached. (0x80000003) occurred in the application at location 0x7c901230 Movie maker then shuts down. Any Ideas? TIA Regards Tom..... Tag: List of MM Codecs? Tag: 27559
  - 21
    - Delete title on clip Hi, How do I delete a "title on the selected clip?" Thanks Tag: List of MM Codecs? Tag: 27557
  - 22
    - How about Microsoft Fix the Software from locking up and not worki Why doesn't Microsoft or the makers of the Movie maker fix the thing. Seems like most of the people here are having problems with it locking up and destroying the work. I don't know how many times I have really needed to use this program and it crashes on me. It has done this since it was released and continues to do so. Just fix the thing, issue a patch, do something. I can't believe they would release software that only runs for about 10 minutes before it locks up the program. Please fix the software, and make it actually run. It is FANTASTIC for the first 10 minutes. -- Brian Blake Tag: List of MM Codecs? Tag: 27554
  - 23
    - image quality I have been using Camtasia, PPT and MM to try to make high quality movies (using photos stills, small movie-ettes and audio. MM seems to have it all - except... when you add an (jpeg) image to the time line, it compresses it so that the image looks blurred and the movie is then too low quality. Can you stop this compression happneing somehow? Camtasia does not suffer from this... Thanks! Tag: List of MM Codecs? Tag: 27551
  - 24
    - Can't make clips with DV-AVI Hi all - just starting with digital video so sorry if answer is obvious (but haven't seen it in this group or in PapaJohn's brilliant site). Importing from Hi8 and Betamax via Canopus ADVC 100 if I opt for Digital device format MM2 doesn't make clips either automatically or subsequently via Tools command. Video and audio seem to be captured fine in DV-AVI, but in a single file which would obviously be much harder to edit. Clips are made, however, when I opt for "Best quality", ie .wmv. Is there a way round this - or should I just settle for wmv? One reason I'd prefer to capture the Betamax tapes (now 20 yrs old) in DV-AVI (despite file size) is that I may want to use another editor later as I get more experienced and I gather nothing else (yet) accepts wmv. Also I have NTI DVD burning software bundled with my Acer and need DV-AVI to convert to MPEG. Thanks Tag: List of MM Codecs? Tag: 27549
  - 25
    - Files Hi I'm trying to import a file and it says that it's not indexed. I tried to change the file typebut: 1. I don't know how 2. I'm sure it wouldn't work Please help! -- ADROOM Tag: List of MM Codecs? Tag: 27548

What SPECIFIC codecs does WMM use?
--
----------------------------
Please update your contact information:

Pastor Rudy Pastucha
Good Shepherd Lutheran Church
3825 Hillsdale Street
Regina, Sask. S4S 3Y5
Phone: (306) 586-0299
Fax: (306) 586-0035

rudy.pastu@sasktel.net

Top

Re: List of MM Codecs? by Dean

Dean
Tue Nov 23 02:28:34 CST 2004

We'll use any that have been registered within DirectShow on the system.
Regards
Dean Rowe
This posting is provided "AS IS" with no warranties, and confers no rights.

"Pastor Rudy Pastucha" <rudy.pastu@sasktel.net> wrote in message
news:10q50eagarrrd88@corp.supernews.com...
> What SPECIFIC codecs does WMM use?
> --
> ----------------------------
> Please update your contact information:
>
> Pastor Rudy Pastucha
> Good Shepherd Lutheran Church
> 3825 Hillsdale Street
> Regina, Sask. S4S 3Y5
> Phone: (306) 586-0299
> Fax: (306) 586-0035
>
> rudy.pastu@sasktel.net
>
>
>

Top