Invalid Pointer when opening a Saved File

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Saving to DVD I appear to have successfully burnt my .avi MM2 movie to a DVD-R using the trial version of Ulead Movie Factory. It plays back fine on my computer, but not on my DVD player,which as far as i can tell accepts DVD-R. I have also tried to burn on DVD+RW but Ulead does not recognise this. Any ideas please. Tag: Invalid Pointer when opening a Saved File Tag: 42420
  - 2
    - Want to use Dazzle DVC 80 with Movie Maker but sound is not found I want to use my Dazzle DVC 80 but although as a video input device it doesn't work as an audio input. It is shown, but now that I've selected it, I get an error message telling me it's not supported and when I click ok in the hopes of changing the setting, it closes out the settings window! Help!! What to do? I just had to reformat and I did have it working before. I seem to recall that the DVC 80 needed to be shoing up in the sound and USB areas and right now it doesn't. The setup disk for it simply installs Video Wave 4 and I'm not interested it it. Any help is appreciated! Gerry Tag: Invalid Pointer when opening a Saved File Tag: 42419
  - 3
    - Re: six hours of .wmv on a DVD? Jerry, All I am trying to do, as I explained, is put six hours of low- quality video on a DVD and play it in a DVD player, with a menu to allow selection of up to 14 different segments. I'm sure I've seen references to doing this, but I have not been successful in finding the references again. You said I should review the help files. MyDVD speaks to the fact that up to 440 minutes of MPEG-1 can be recorded to a DVD if Dolby Audio is used and not transcoded. However there doesn't seem to be a way to do that if the source file is .wmv format. Cari said to burn as a data DVD to test the player. How do I get a menu to work with the DVD player if all I do is burn an MPEG-1 file as data? What is the required DVD file structure? The convert query at videohelp.com doesn't find any answers for the WMV to MPG conversion selection. Jay -------- Original Message -------- Subject: Re: six hours of .wmv on a DVD? Date: Sat, 24 Sep 2005 21:29:08 -0700 From: Jerry <NoSpamChiefZeke@MSN.com> Newsgroups: microsoft.public.windowsxp.moviemaker If you don't understand what Cari said then you had better re-read the help files for your DVD burner software - or forget trying to do whatever it is you're tring to do as what was said is understandable. -------- Original Message -------- Subject: Re: six hours of .wmv on a DVD? Date: Sat, 24 Sep 2005 19:52:34 -0700 From: Jay O'Brien <jayobrien@att.net> Newsgroups: microsoft.public.windowsxp.moviemaker Cari, I appreciate your response. Now, would someone please explain what Cari said? I don't have a clue what to do based on Cari's reply. Also, www.videohelp.com is a great resource, I refer to it a lot. But just that generic reference doesn't give me any help toward my goal. I don't know where to go at that site to find the answer I seek, so I asked here for guidance. Jay -------- Original Message -------- Subject: Re: six hours of .wmv on a DVD? Date: Sat, 24 Sep 2005 17:52:00 -0700 From: Cari (MS-MVP) <Newsgroups1@coribright.com> Newsgroups: microsoft.public.windowsxp.moviemaker If you have a DVD player that plays MPEG files, re-encode them as MPEG1 files and you can fit 4 or 5 hours on one DVD.... you do not burn them as a Video DVD, but as a Data DVD. But make sure your DVD standalone can cope first. Check at www.videohelp.com - - Cari (MS-MVP) Printing & Imaging -------- Original Message -------- Subject: six hours of .wmv on a DVD? Date: Sat, 24 Sep 2005 12:07:13 -0700 From: Jay O'Brien <jayobrien@att.net> Newsgroups: microsoft.public.windowsxp.moviemaker I have an old VHS tape, recorded in 6-hr mode in 1983, with 14 episodes of 20-25 minutes each. Using a Canopus ADVC-100 to convert the VCR output to firewire input to the computer, I've made .wmv files of each of the 14 episodes, and edited in a title to each one using moviemaker. I've saved them in the "Video for LAN" 768Kbps .wmv format which is 640x480; the .wmv files range in size from 105 to 153MB, totalling less than 2GB. The .wmv files play fine using Windows media player; the quality is just as "good" as what is recorded on the old VHS tape. Using MyDVD, I've burned DVDs, each with a maximum of three episodes on the DVD, with a menu for selecting the episode to view. They play fine in a DVD player. The problem is that it takes five DVDs. How can I put the 6 hours of video, the 14 .wmv files, on one DVD (or two DVDs), with menu selections, that can be played in the DVD player? Video quality isn't an issue, given the available source. I'm not locked in to MyDVD; I just happen to have it, and it works as described. Jay O'Brien Rio Linda, CA Tag: Invalid Pointer when opening a Saved File Tag: 42418
  - 4
    - using Ulead Movie Factory to burn DVD I have used Movie Maker to create my movie, saved it to my computer and have downloaded Ulead Movie Factory to save to a DVD. My problem is that the playback on my TV is terrible - very jumpy and the picture is not clear. What am I doing wrong??? Tag: Invalid Pointer when opening a Saved File Tag: 42417
  - 5
    - video capture I am trying to capture video using Movie Maker Capture Wizard and when I get to 'Video Settings', the option to use DV-AVI is not given (it is greyed out and not in bold as the other 2 options are). I want to save to a DVD to playback on a DVD player and I have been told that this is the best setting to use. Would you know the reason this option is not available, otherwise what would be the next best setting to use? Tag: Invalid Pointer when opening a Saved File Tag: 42415
  - 6
    - Re: six hours of .wmv on a DVD? Cari, I appreciate your response. Now, would someone please explain what Cari said? I don't have a clue what to do based on Cari's reply. Also, www.videohelp.com is a great resource, I refer to it a lot. But just that generic reference doesn't give me any help toward my goal. I don't know where to go at that site to find the answer I seek, so I asked here for guidance. Jay -------- Original Message -------- Subject: Re: six hours of .wmv on a DVD? Date: Sat, 24 Sep 2005 17:52:00 -0700 From: Cari (MS-MVP) <Newsgroups1@coribright.com> Newsgroups: microsoft.public.windowsxp.moviemaker If you have a DVD player that plays MPEG files, re-encode them as MPEG1 files and you can fit 4 or 5 hours on one DVD.... you do not burn them as a Video DVD, but as a Data DVD. But make sure your DVD standalone can cope first. Check at www.videohelp.com -- Cari (MS-MVP) Printing & Imaging -------- Original Message -------- Subject: six hours of .wmv on a DVD? Date: Sat, 24 Sep 2005 12:07:13 -0700 From: Jay O'Brien <jayobrien@att.net> Newsgroups: microsoft.public.windowsxp.moviemaker I have an old VHS tape, recorded in 6-hr mode in 1983, with 14 episodes of 20-25 minutes each. Using a Canopus ADVC-100 to convert the VCR output to firewire input to the computer, I've made .wmv files of each of the 14 episodes, and edited in a title to each one using moviemaker. I've saved them in the "Video for LAN" 768Kbps .wmv format which is 640x480; the .wmv files range in size from 105 to 153MB, totalling less than 2GB. The .wmv files play fine using Windows media player; the quality is just as "good" as what is recorded on the old VHS tape. Using MyDVD, I've burned DVDs, each with a maximum of three episodes on the DVD, with a menu for selecting the episode to view. They play fine in a DVD player. The problem is that it takes five DVDs. How can I put the 6 hours of video, the 14 .wmv files, on one DVD (or two DVDs), with menu selections, that can be played in the DVD player? Video quality isn't an issue, given the available source. I'm not locked in to MyDVD; I just happen to have it, and it works as described. Jay O'Brien Rio Linda, CA Tag: Invalid Pointer when opening a Saved File Tag: 42413
  - 7
    - six hours of .wmv on a DVD? I have an old VHS tape, recorded in 6-hr mode in 1983, with 14 episodes of 20-25 minutes each. Using a Canopus ADVC-100 to convert the VCR output to firewire input to the computer, I've made .wmv files of each of the 14 episodes, and edited in a title to each one using moviemaker. I've saved them in the "Video for LAN" 768Kbps .wmv format which is 640x480; the .wmv files range in size from 105 to 153MB, totalling less than 2GB. The .wmv files play fine using Windows media player; the quality is just as "good" as what is recorded on the old VHS tape. Using MyDVD, I've burned DVDs, each with a maximum of three episodes on the DVD, with a menu for selecting the episode to view. They play fine in a DVD player. The problem is that it takes five DVDs. How can I put the 6 hours of video, the 14 .wmv files, on one DVD (or two DVDs), with menu selections, that can be played in the DVD player? Video quality isn't an issue, given the available source. I'm not locked in to MyDVD; I just happen to have it, and it works as described. Jay O'Brien Rio Linda, CA Tag: Invalid Pointer when opening a Saved File Tag: 42409
  - 8
    - How do you get .avi files onto movie maker? I can't get my .avi files to play on movie maker. The audio codec is mpeg-3, if that helps any. What do I do? Tag: Invalid Pointer when opening a Saved File Tag: 42408
  - 9
    - Green Screen i think i figured out I think i got the green screen thing -- needhelp911 Tag: Invalid Pointer when opening a Saved File Tag: 42406
  - 10
    - green screen I looked at the moviemakers.net forum, and found a "solution". Someone says to "use inverse video to get video in text, change the text, (now background) to green, and make a clip of the text with video and a green background to use for green screen". can some one simplify that? I mean, what's inverse video? -- needhelp911 Tag: Invalid Pointer when opening a Saved File Tag: 42404
  - 11
    - Green Screen My question is: Is it possible to acheive a green screen effect in windows movie maker? Thanks a bunch! -- needhelp911 Tag: Invalid Pointer when opening a Saved File Tag: 42399
  - 12
    - voice over is it possible to record voice over on moviemaker 2 ? can anyone recommend any good tutorial sites ? david Tag: Invalid Pointer when opening a Saved File Tag: 42397
  - 13
    - Big time Help needed writing To Camera Dear Forum/PapaJohn, I am still having problems wrting to tape when finishing a movie. The camcorder is activated ie. it reads that it is recording but it never stops recording and there is nothing on the tape. I tried to use th WinDv program to correct the problem but even that did the same. Any suggestions anybody Signed A desperate Nicky B! Tag: Invalid Pointer when opening a Saved File Tag: 42395
  - 14
    - Writing to Tape Big Time Help Needed Please Dear Forum/PapaJohn, I am still having problems finishing the movie and writing to tape. The camcorder is activated ie. it records but does not stop and there is nothing recorded on the tape. I tried the WinDV download but even that did the same as the above. Any suggestions?? Thank you for any help you can give Nicky B Tag: Invalid Pointer when opening a Saved File Tag: 42394
  - 15
    - trouble saving, not covered before i have a video made that is 10 minutes, and it just doesnt save i dont get an error, but it says time remaining 1643 minutes, which is reterded because my movies that were 5 minutes saved in under 5 minutes. so why is it doing this? Tag: Invalid Pointer when opening a Saved File Tag: 42387
  - 16
    - Date and Time On Screen Display (on DVD Conversion from DI-8 Recording) Hi, I am using the DI-8 Camcorder With Movie Maker on Windows XP. When I play the cassette on camcorder it display date and time on the corner of screen. But in the moviemaker it only creates the links to time and date. How can I make DVD from DI-8 recordings (using Movie Maker), to display the date and time on the screen all the time. It will be great idea to have option to display the date-time with some option like subtitles. With Rgds, BJ. Tag: Invalid Pointer when opening a Saved File Tag: 42386
  - 17
    - Saving video files help I just got a Logitech web cam. I have stitched together some videos recorded with the web cam using Movie Maker. How do I save the resulting video in anything other than the movie maker file extension. The .wmv extension would be nice so other poeple can open the file if I send it to them. Thanks for your help pk Tag: Invalid Pointer when opening a Saved File Tag: 42385
  - 18
    - Importing files without index?? I have downloaded an old newsreel from the internet and want to import it into movie maker. However everytime I try it tells me that it cannot open the file because it is not indexed. How can I index the file?? Also, when I play the file in movie player I can't fast forward or rewind, I have to go back to the begining of the film. Are these problems linked? Tag: Invalid Pointer when opening a Saved File Tag: 42384
  - 19
    - Creating collage of stills in movie Is there a function or technique I can use to create a movie sequence that shows a collage of stills? I have a set of still photos and want them to appear seemingly randomly overlaying each other on parts of the screen in rapid succession. Any ideas would be greatly welcome! Tag: Invalid Pointer when opening a Saved File Tag: 42383
  - 20
    - Animated Movie using Movie Maker 2 I'm trying to create a simple animated feature using, hopefully, Movie Maker 2. What I need help with is moving a graphic within the frame. For example, let's say that there is a static background image and I want to move a small graphic across this background image. These images would be hand drawn, say in gif/png/jpeg format. If it's possible, how would I go about do that? Thanks in advance. Tag: Invalid Pointer when opening a Saved File Tag: 42382
  - 21
    - How add narration or music? My basic movie is done but needs better narration in spots and I'd like to add music. My book on Windows XP doesn't cover this procedure very well. How do you do it? Tag: Invalid Pointer when opening a Saved File Tag: 42378
  - 22
    - editing music clips Is there a way to cut the middle of a music clip and keep the beginning and the end? I can only seem to make it cut off the beginning or end, but not the middle. Tag: Invalid Pointer when opening a Saved File Tag: 42377
  - 23
    - Saving Trouble Hello, Whenever I try to save a Video File from Movie Maker, it *stops* at 93, 97, or even 99 percent. The program doesn't freeze, and I can click cancel with no worries, but I can't save any videos! Help! Tag: Invalid Pointer when opening a Saved File Tag: 42376
  - 24
    - Juddery preview when creating 2nd film- OK for 1st My first film with MM2.1 went flawlessly; I capured over 30GB of DV footage and created a 18min widescreen film, burned it to DVD - easy! I am trying to create a second film using some new captured DV footage (about 20gb), my computer is doing nothing else and has over 60GB of free HDD but I cannot even get past the first two seconds of the film without huge judder as if my HDD or system was struggling to cope (this is within MM using a small preview screen). I have defragged my HDD and my computer is two months old, with all other apps working fine. I even deleted the orginal captured DV footage fopr my first film to ensure that I have suffient HDD space. What am I missing here? HELP! Tag: Invalid Pointer when opening a Saved File Tag: 42373
  - 25
    - Missing Codec Have captured an analog video using my Sony VAIO Laptop's GigaPocket Utility. File has been exported to the desktop as an MPEG-2 file. Movie plays OK in Windows Media Player but is not recognized by Windows Movie Maker when attempting to import it into a new "collection" for editing. An error window pops up indicating a missing codec. How can this problem be resolved? Tag: Invalid Pointer when opening a Saved File Tag: 42371
- Next
  - 1
    - What's different behavior between AMCAP.exe and Movie Maker Hi, 1.AMCAP.exe doesn't call Flip of DD_SURFACECALLBACKS function but Movie maker does. Why? 2.After I enter the Movie Maker AP and click the "Capture from video device ..",it'll immediately call Flip function to flip the surface ,but on that time we doesn't see anything and we haven't make any setting before it preview,it's a little unusual. 3.It seems go software flip flow,but it has DDVP_AUTOFLIP flag when it call DdVideoPortUpdate function ,how can I distinguish the Hardware Flip or Software flip in Movie Maker? Best regards. Tag: Invalid Pointer when opening a Saved File Tag: 42360
  - 2
    - OPENMG SECURE MODULE When I save a project I can not open it again, think I have to install OPENMG SECURE MODULE, but don't know how. Could anyone help me please!!!! Tag: Invalid Pointer when opening a Saved File Tag: 42358
  - 3
    - creating a powerpoint with movie maker I have created a powerpoint with pictures for a wedding with Windows Movie Maker. Now I am ready to burn it. It says to burn on CD-RW. Can I burn it on a DVD and will it work on our DVD player properly. I have a DVD burner. Tag: Invalid Pointer when opening a Saved File Tag: 42357
  - 4
    - Random Transitions I am trying to make a movie that has a lot of pictures. Is there a way I can simply have movie maker add the transitions randomly? I read a great thread on how to add the same transitions to all the slides but I wanted to spice it up a bit. Thanks! Tag: Invalid Pointer when opening a Saved File Tag: 42350
  - 5
    - Audio Fade Out? Hello, how do I make the audio fade out (ie: on the last frame of a movie)? thank you Tag: Invalid Pointer when opening a Saved File Tag: 42341
  - 6
    - saving to mini dv I have a movie that I am trying to save to my panasonic mini dv. I have the ieee1394 firewire. When I try to save to the camcorder, I dont get an error message, but it wont let me save it. I have read all the trouble shooting stuff and I think I have that covered. I have modified the size of the file when I save to CD or desktop and it will let me. I think the file is too large when I create my movie. I have 9 songs and approx 1200 images. The file shows only 254 meg before I save my movie. I cant see where I can change the bit rate from the pc to the camcorder. I can save the file just fine and view it in media player after changing the bit rate when going to the CD. Am I just out of luck because the file is too big when recording to the camcorder? Please help. Tag: Invalid Pointer when opening a Saved File Tag: 42328
  - 7
    - Speed up clip TIP and questions I wanted to speed up a clip in WMM2 more than the default 2X; so I doubled the speed, saved the clip as an AVI then imported it back into Collections, sped it up again (2X), saved it to an AVI, re-imported it again and then finally applied a 2X Video Effect to give me a very speedy clip (without apparent loss of frames or introducing very choppy video). The question I have, is there any loss in AVI quality the more I apply this technique to a set of clips? Also, I have been reading on PapaJohn's website that WMM uses AVI-I versus AVI-II, what do DV camcorders typically save to tape, AVI-I or AVI-II? Is there any consumer way of editing AVI-II or is that left to the professional equipment? Any advantage to using AVI-II or is it lossy, the more you import and save back to AVI-II (if you can)? Thanks, PJ Tag: Invalid Pointer when opening a Saved File Tag: 42327
  - 8
    - mm help!! PLEASE!!! I need to get my mm project file burned to a cd that i can play in my home cd player....i need it for a wedding this weekend and am running out of time...please help! Tag: Invalid Pointer when opening a Saved File Tag: 42326
  - 9
    - Using Overlays I was just reading about using overlays in MM and it sounds like an interesting idea. However, when I try to drag my png to the overlay part of the timeline, it stops dead in the video section and won't go where I want it. Could someone explain to me simply how to use overlays over images? Or can they only be over transitions? Thank you! Rach Tag: Invalid Pointer when opening a Saved File Tag: 42323
  - 10
    - Creating DVD's with CD-R's or CD-RW's I have created and edited a movie on Windows Movie Maker 2 and want to make a DVD to play on a DVD player. I only have a CD-RW burner and DVD ROM drive on my computer. Can I burn a DVD using a CD-R or CD-RW with my existing drive or do I have to use a DVD-R or DVD-RW with a DVD burner? -- Sincerely, Keith Tag: Invalid Pointer when opening a Saved File Tag: 42321
  - 11
    - Ever see a stray frame/image copied into a transition?? I am editing an hour-long video with about 100 clips. I think I am encountering an error in WMM, but not sure. When I split a long clip into two clips, and then delete one of the clips, sometimes a single image/frame from the deleted clip appears in the "transition" for the next clip. It is only a single frame/image, but it ruins the video because it is out-of-context. My video appears choppy, with a single image spliced between two clips. My question is "where is this single image stored?" It seems to be stored in the "transition" between clips. As I scroll through the video frame by frame, the stray image appears "between" two clips. If I view the storyboard screen and click on the transition box, I can see the stray image/frame. I wish I could delete it. I am not using any transitions in this video. The menus do not allow me to delete the transition because WMM thinks I have not specified any transitions. Has anyone seen this? Thanks!! Tag: Invalid Pointer when opening a Saved File Tag: 42317
  - 12
    - MM2 I feel sick to my stomach!! How do i burn a movie I made in MM to play on my home dvd player....i have tried to install MM2 but everytime i go to run it nothing happens.....i''ve been working on this for two days and have a slideshow i need bunrded for a wedding..please help! Tag: Invalid Pointer when opening a Saved File Tag: 42316
  - 13
    - How to Burn Movie Maker Project File to DVD?? I have a completed Movie Maker Project File and am unable to burn or transfer to my Sony DVD Burner with Sonic MYDVD software ( which came with my Sony DVD Burner DRX-3OUL). Error message says my DVD does not support this file type. I have done this before with no problems. What are the steps to finalize my movie and convert the movie maker project file to a format that will transfer to this DVD. Please help, trying to present to my dad this afternoon for his 70th BDAY...didn't anticipate any problems transferring... Tag: Invalid Pointer when opening a Saved File Tag: 42310
  - 14
    - Question for Papa John Hi Papa John, You have helped me before, so I wanted to ask you this question. I have made a movie in Movie Maker, burned it to a DVD. Then I deleted it from my computer in order to free up disc space. SO, I was wondering - is there a way to put the files back on the computer from the DVD so that I could EDIT it? Hope that makes sense. Please let me know.Thanks a million. BB Tag: Invalid Pointer when opening a Saved File Tag: 42305
  - 15
    - Can't Capture Video I have a JVC DV camcorder that I am trying to capture video from. I have a firewire card and cable that are new and I have already captured three tapes worth of video with. Now I am running into a problem. I can connect the camcorder and it automatically open WMM and its capturing utility. I go through all of the set up and select either capture whole tape or capture manually. Preview is on. Then when I go to Start Capture WMM will control the camcorder but nothing appears in the preview, the size of file always shows as 5K i believe but the time displays as zero. When I stop the Capture it gives me an error that the device might not be connected properly or the program isn't correct. I have uninstalled the firewire driver twice, I even removed the card all together. Any info would be great Thanks Sean Tag: Invalid Pointer when opening a Saved File Tag: 42301
  - 16
    - Beg. Questions I have many photo's that I scanned up at 300dpi and would like to put on both a CD and DVD. 1) Have read alot on here about 16:9 ratio but am confused. They are in Paperport format right now (.max) for best quality should I save in .jpg or .bmp? I have Paint Shop Pro so I can resize them. But what do I resize them to for burning to both CD and DVD. 2) "Video Impression program" came with my Canon digital camera and save's the video to .avi and slideshows save to .slw . Do I then need another program to burn the video or slide show and if so does Windows movie maker do this? If I do need another program which to you recommend that does both CD and DVD that is very affordable. Any help 4 this newbie would be appreciated... as I have been reading up on the internet for about 7 days about video authoring and my brain is now in melt down. Sinc Deb Tag: Invalid Pointer when opening a Saved File Tag: 42300
  - 17
    - Audio How many audio tracks are there to work on with Movie Maker software? Is it easy to control the level of the audio and do fade in's and out's and cross fades and stuff? How many video tracks are there to work on. Tag: Invalid Pointer when opening a Saved File Tag: 42298
  - 18
    - Audio/Music -- Cannot hear Music clip ThanksI have added music clips to my movie and muted the original audio from the clip. But still cannot hear Music/Audio that I have added. I can preview in ollections but nohting seems to allow it to play when previewing the video.. Please make suggestions.. It's probably something simple... Thanks!! Tag: Invalid Pointer when opening a Saved File Tag: 42296
  - 19
    - Timeline Drag/Drop Windows XP Pro... my first time trying to use Movie Maker. I import a video file (MPG). I double click it, I hear the sound but see no movie. I drag the thumbnail to the timeline and get an immediate MS error that will close the program, asking if I want to send a report to MS. I have a 950 mhz processer, 512 meg RAM. Any thoughts? Earl Tag: Invalid Pointer when opening a Saved File Tag: 42295
  - 20
    - Home Video Made into DVD for TV Viewing I have made a digital tape of our vacation using a Canon ZR300 camcorder. I am a novice to all this - first time trying this. I would like to make a DVD of this vacation to be able to see it on the TV. I have Windows XP with Movie Maker. In looking at the manual it only looks like I can make a cd. I made the cd but the voices that were on the tape did not pick up - what did I do wrong? 2nd question - What do I need to make a DVD? -- quiksilver Tag: Invalid Pointer when opening a Saved File Tag: 42292
  - 21
    - Picture over Video Please help. I have about 10 minutes of captured video with an important audio track on the video. About 5 minutes in, I would like to put a picture over the video, yet allow the video to keep running so as to allow the audio track to come through. The effect I am looking for would be similar to a weather man. First the camera is focused on him, then you continue to hear him talking but on your TV you see a weather map. Is this possible? Thanks Tag: Invalid Pointer when opening a Saved File Tag: 42291
  - 22
    - import overwrites all clips except last All .avi files imported into WMM are overwriting each other. Does anyone know how to import a bunch of .avi files into WMM as a group rather than what is happening to me now which is I end up with the last file imported? It makes no difference if the files come from a Sony camcorder or a Canon digital camera they all overwrite each other when imported into WMM. The files have individual names but still get overwritten during import. Tag: Invalid Pointer when opening a Saved File Tag: 42286
  - 23
    - Video not moving with the browser. Hi, I created a bunch of clips, and embedded them to a web page. However, when the browser window is moved the video stays on its original spot. Its especially noticable when a person scrolls up or down the page. What do you think the problem is. Thanks for your help. Tag: Invalid Pointer when opening a Saved File Tag: 42284
  - 24
    - connecting sony ip7 camcorder i have two sony camcorders but moviemaker will not recognise my sony ip7 when connected ....why????? -- iii Tag: Invalid Pointer when opening a Saved File Tag: 42278
  - 25
    - I want to copy a clip from the timeline to a collection. I want to copy a clip from the timeline to a collection but copy and paste dos not work. HELP? Tag: Invalid Pointer when opening a Saved File Tag: 42277

Hi, does anyone have ANY idea how to resolve this?
When I try to open a previous file, I get an error saying "Invalid Pointer"
and the file doesn't open!
Pls tell me my hours and hours of time on the project has not been deleted :-(

Anyone with any ideas, pls pls post!
Thanks

Top