No music in record to DV
I have made a short film comprised only of still photos (with effects and transitions). I placed music in the audio/music track and saved the file. Everything works except when I try to record it out to the Digital Video Camera, a Sony DCR-TRV520. I get the video portion fine but no audio at all. I have tried changing the audio record rate to 16 bit on the camera but that didn't help. I appreciate any help, this is for my grandfather's 90th birthday this weekend
Thanks Tag: Censored... Tag: 11762
Can't hear song playing
When it first installed I could hear the song fine, now it just has a white bar in the timeline with the name of the song in it. How do I fix that?? Tag: Censored... Tag: 11758
Can't pull clips into storyboard
My son created a storyboard in Video Maker. Somehow,
he's done something so that all the clips in the
storyboard now show up as red X's. If I right click on
these clips and look at Properties, I find that they have
filenames and are located in the Collections area of the
application. But the software for some reason no longer
can pull the clips into the storyboard.
My son may have inadvertently deleted a handful of clips
that were part of the storyboard, but the majority of the
clips can be found in Collections.
It seems the program is not able connect the storyboard
filenames with their actual location.
I don't know what to do.
Help!!
Greg Tag: Censored... Tag: 11757
Video Capture Device Not Seen by MovieMaker
Hi,
I have a TDK IndiCapture USB 2.0 capture device. The
device came with ShowBiz Capture/editing software.
ShowBiz works fine and can capture with no problems. I've
tried using MovieMaker for a comparison of software
usability but MovieMaker does not recognize the capture
device. It shows up fine in the installed device
properties and works fine with Showbiz, but MovieMaker
doesn't see it. Any one with any ides. Thanks in
advance. Tag: Censored... Tag: 11755
system crash
THE MOVIE WORKS FINE BUT WHEN I TRY TO PUT TITLE,TEX OR ESPECIAL EFFECTS THE PROGRAM JUST CLOSES AUTOMATYCALLY AND I HAVE TO REOPEN BUT THE SAME PROB AGAIN.I'M UNABLE TO MAKE THE PROGRAM ADD TILLE OR ANYTHING THE PROG CLOSE WITH NO WARNING
ANY HELP? Tag: Censored... Tag: 11754
audio in WMM
I try to lay tracks ontop of the video and it works but then an error message comes up and kciks me out of WMM. these error messages keep reappearing whenevert i get into WMM but when i delet the songs from it, it works fine... someone help me please!! Tag: Censored... Tag: 11751
Enter video effects and program shuts off
I cannot seem to get the movie maker to not crash when entering a video effect. eg I try to use the "older film" effect and the program just vanishes. Any tips on how to fix this? Tag: Censored... Tag: 11750
sony dvd cam
Just bought a sony dcr-dvd300 handycam and when I try to import in moviemaker, it gets to 99% and stops. Any help on what to do or use
Thanks Tag: Censored... Tag: 11749
changing brightness/contrast
I know that to change the brightness/contrast of a video I need to configure the capture device settings before I capture the video. The help file says that the first screen that should appear when I go to the video capture wizard is a list of devices and from here I can configure my camera to change the brightness and contrast settings. However, it detects my camera automatically and when I go to the video capture wizard it skips over the first dialog box where I can configure the capture device and goes straight to the place where I choose a location and file name! How do I get to these settings?? I have a Sony DV Camcorder. Tag: Censored... Tag: 11748
MICROMV SONY
I have a Sony DCR IP7E Handycam which runs on the new
MICRO MV micro cassettes.
Will Moviemaker 2 work with this format, and if so, how?
Advice please Tag: Censored... Tag: 11738
HELP! No titles or credits
Help! When I go to put in titles or credits in MM2
nothing happens. I get nothing in the preview window.
Titles I can type in the text box on Left, but will not be
placed into clip/slide. Credits option doesn't do
anything- you click on it and it just stays there at the
menu. Why is it doing this? HOw can I fix it? Tag: Censored... Tag: 11732
Capturing Profile not Found
Thank you for reading...
I'm trying to import (capture) a movie from a Sony Digital camcoder to my Sony PC RZ34. I'm using a digital D8mm and Hi8mm tapes and my camera is conneted via firewire to my pc.
When I turn on my camare to play function (VCR) Windows XP detecs the camera and the import wizard starts automatically. When I click next on the capture video wizard, I get an error message "Capturing profile not found"...
I have tryed everything. I can see my cam on windows explorer, I can capture video recording directly from my cam to my pc but some reason I can not capture the video from the tapes in my camcoder.."Capturing profile not found"
Any ideas?
Thank yo for your help Tag: Censored... Tag: 11730
Recording video and writing to DVD
I need some guidance, I'm pretty new at this. I will be recording video, about 20 to 30 hrs worth and ultimately I want to burn it to a dvd (multiple dvds) so that it can be played back either on a TV or a computer (the image has to be fairly large).
I'm not sure what the best process is but I'm thinking I can use MovieMaker to record AVI files, then I'm not sure if I should burn vcd files, or mp3 files (I don't fully understand the advantages/disadvantages of one over the other). I've never done either one before and I'm looking for the simplest process that maintains the audio/video streams in sync, and creates a large TV size (or nearly TV size) image on playback. I'd also like to be able to play back on either a TV screen or using a PC.
Thanks, Tag: Censored... Tag: 11729
can CompUSA help?
Can I bring my system down to CompUSA (where I bought it
1 yesr ago) and pay them to troubleshoot my WMM? I still
contiunue to get jagged, choppy video playback ... have
tried everything everyone's suggested, and also tried
ideas off of PapaJohna's site (hardware acc, codecs, etc.)
Has anyone brought a system to a place like CompUSA and
had them straighten it out?
Thanks for any feedback,
Michael
(Yes, I have already tried to contact them, but they
haven't gotten back to me for a few days now) Tag: Censored... Tag: 11716
import of mp2 format
I am having a problem importing a movie that is in mp2
format that I created with my ATI software. I can play
the movie back fine in the ATI player, but if I try and
play it in Windows Media Player or import into Movei
Maker it says File is empty. If I try and play it in WMP
then I get a error and asks me if I want to send a report
to Microsoft. I am thinking that possibly I need a
codec, but am not sure. I have checked to see that my
system is updated using the Windows Updates, but I have
everything. I also made sure the media player is up to
date as well.
Can anyone give me a answer why this isn't working? I
can import if the format is mpg, but I need the better
compression rate.
Thanks! Tag: Censored... Tag: 11711
Novice question?
I would like to take boxes of old kids video's etc. and migrate all of them
to DVD. Could someone direct me to a good web site or provide some
information that will help me get started on this?
thank you... Tag: Censored... Tag: 11709
Sound OK but no Video displayed
Hi
I have imported a 30 sec MPG movie into MM2. When I play the movie the sound is fine but it does not display the video. I also get an error when I try to save it
Other mpegs are fine
Anyone got any idea
Cheer Tag: Censored... Tag: 11707
pictures does not appear on screen
I tried to insert a picture into my video but on the
timeline it looks all right, but in the preview screen,
it appeared as a black image. even when i exported it out.
I have turned off system restore.. is there anyother way? Tag: Censored... Tag: 11706
presario s3190uk digital video capture - doesn't
Hi, i have got a year old presario s3190uk pc. I also have a canon
mv300 digital camcorder. The computer has a firewire connection on the
back which i have connected to the appropriate port on the camera. It
don't werk! Any ideas? Do i need a video capture card? Bloody
technolgy! bring back 8mm cine!
many thanks... nick Tag: Censored... Tag: 11705
mm2 makes audio faster than pix after clips have been burnt to cd's. why?
i use movie maker to make a movie of various pictures and add music to the background. everything is perfect after i have saved the movie on the hard disc. When i burn to cd in vcd format, the audio becomes faster than the pix. why does this happen? Tag: Censored... Tag: 11698
What's the best fomat to burn DVDs?
A gentlemen asked this question a couple of days ago and
never got an answer. I have the same question. Is it
better to convert to an AVI format??
Thanks,
Joe Tag: Censored... Tag: 11696
Microsoft DV camera and VCR
Any resolution to this issue. Dozens of posts here, but no answers. XP is not recognizing my camcorder. The display on the unit (Sony TRV 350) reads "DV IN", but I get a capture error when trying to bring in the video through the 1394 port using Pinnacle Studio 8. ANy help out there? Tag: Censored... Tag: 11695
Device not detected by WMM
I have a "Pinnacle PCTV Deluxe" USB capture device attached to my note book. The unit works well under Studio 8 and I am impressed with it overall.. WMM say's that there is no capture device dected and this frustrates me. I am happy with studio 8 but would like to play around with WMM. Any ideas on solving this problem (if it can be solved that is)???? Tag: Censored... Tag: 11691
Dell Compatibility
I have been trying to figure out if i can buy a firewire port and i need to know if my computer is able to take it in. And where it goes into my computer...I have a Dell Dimension 4600 and i need to know where my port goes and if i am able to buy one for my computer that will be compatible. please please please help thanks alot Tag: Censored... Tag: 11690
I can't open up a MM2 project in Click to DVD
I have spent many hours trying to figure this one issue
out! I recorded a vhs tape in to the Sony Click to DVD
program and then sent it to Windows MM 2. I then saved a
rough version the correct way, evidentally. But I don't
know how I did it now. When I say I saved it correctly,
I have spent many hours trying to figure this one issue
out! I recorded a vhs tape in to the Sony Click to DVD
program and then sent it to Windows MM 2. I then saved a
rough version the correct way, evidentally. But I don't
know how I did it now. When I say I saved it correctly,
I can send this video from MM2 to Click to DVD and then I
click on, "import video files to the clip tray". And a
window opens and I can see this file is listed as; Video
Files (*.mpg, ".avi). However, unfortunately since this
isn't a finished product I have continued to work with
the video and have no idea how to save it in this "Video
file" section. The newer versions of the video I am
making and saving are called a "windows movie maker
project." And despite trying everything I can think of I
can not get it listed as a "video clip" and a video file
(mpg. avi...). So in essance I somehow I did it right
once and have no idea how I did it!
I would really appreciate your help on this one,
anyone!!! I hope this question makes sense.. Tag: Censored... Tag: 11687
Movie clips
Just curious if anyone might know this..
I'd like to take a short, 5 second clip from a DVD movie, like "Spaceballs" for use in a movie I'm creating. How can I capture a clip from a DVD
Thanks
Casey Tag: Censored... Tag: 11680
MM does not recognize capture card
I have a Pinnacle AV/DV capture card which I got with Studio Deluxe package. The card is a FireWire card that has a breakout box to capture analog video. This capture card works and is recognized in Studio 8 software as a valid capture device, but when I try to run MM2 and capture video with it, it does not show up in the list of available capture devices. The only thing MM2 sees as a capture device is my Veo webcam. Pinnacle Studio 8 is a great program and I like it a lot, but I thought I'd play around with MM2 a bit to see what it can do - maybe fix the audio/video synch problem with Studio. Tag: Censored... Tag: 11679
WMM does not see my USB capture Card
I am trying to use WMM to capture analogue video from my VCR through a Dazzle Digital Video Creator 150. WMM states a "video capture device was not detected".
Can anyone suggest a fix? Thanks Tag: Censored... Tag: 11678
What File Format should I save to in order to create a DVD?
At the risk of making people mad with another request to explain this...
I am using WMM2 to create a movie. WOW I love the program.
Now that I have my movie in a project file, ready to save, then to burn into
DVD format I just want to know what file format I should save to.
I have Roxio Easy CD/DVD creator which was bundled with my burner. My
capture device is a Dazzle USB, which though not totally compatible with
WINXP, does capture the video.
Should I shell out some bucks and get some other software? If so, please let
me know what to look for.
In any case, the WMM2 save to file format question is the most important
issue I'm facing right now.
Thanks for your help.
Fran
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.580 / Virus Database: 367 - Release Date: 2/6/04 Tag: Censored... Tag: 11672
Video Capture Plays Back Too Fast
I purchased a new Dell system several months back with a DVD burner and supposedly everything I needed to do video capture and editing. I am trying to use Windows Movie Maker 2, but I'm having a problem. WMM recognizes my camera (Canon ZR40 - Mini DV format) and when I start the capture, I can see the video footage through the camera's display. However, if I capture five minutes worth of video, when I play it back it plays as if it is in fast forward -- the five minutes of video takes just a few seconds to play.
I have been trying to research this problem for months. I found this in the Microsoft Knowledge base (http://support.microsoft.com/default.aspx?scid=kb;en-us;814837), but I don't think this is my problem. It says that this may occur if you have an outdated version of WinDVD -- I have no version of WinDVD. To me this also implies that any video clip plays back this way. I only have this problem playing back video I have captured -- other video clips play back fine. Also, if I save the clip I captured, it plays back in other programs at the accelerated speed.
I tried talking with Dell tech support, but they kept telling me this was my problem and I would have to purchase WinDVD in order to make Windows Movie Maker work correctly. It is hard for me to believe that Microsoft would make a software that depended on another company's software to work. If WinDVD is required for WMM to work, then it should be included with WMM. The system requirements for WMM make no mention of WinDVD.
Any ideas would be greatly appreciated. Tag: Censored... Tag: 11669
MM2 frequent lock up must be reactivated with Cntr/alt/del.
Is there some simple way to prevent the lockup of MM2 when editing video? I am using Windows XP with a 260 MH CPU and 512 Mb memory on a recently defragmented 105 Gb hard drive. Tag: Censored... Tag: 11668
How to capture video from a Sony DCR-DVD100 camcorder
I recently bought a Sony DCR-DVD100 camcorder. It connects to my computer through a USB port. I am able to watch the video in Windows media player, but when I try to edit it in Windows Movie Maker it only recognizes the sound and leaves the video blank. I tried capturing straight from the camcorder by connecting it to the USB port but Windows movie maker will give me a message that it does not detect a video capture device. Also, this camcorder does not work with a firewire port. What am I doing wrong or what do I need to do? Any help would be much appreciated. Tag: Censored... Tag: 11667
S.O.S b4 despair with VCD and MM2...
Hi, whoever is out there...
For nearly 10 days I've been trying to master finally the
technique of video capturing and editing via Movie Maker
2. I've finalised the project, saved it to my hard
drive....and now want to get it on a CD -R/RW to send to
friends, so they can watch it on their standalone DVD
player...
Well, that's where I am stuck as all burnt CDs so far do
not play on a DVD yet, what ever I do... I rendered it now
even in AVI format (10GB for 40 min film) and tried to
burn it via Nero (60 days trial version), but still no
luck and it comes out as a DAT file, which even movie or
media player can't read anymore...
Don't know, where the missing link is. My standalone DVD
is a Panasonic S35, which according to instructions plays
VCD,SVCD,DVDs etc...
Any Merlin Whizard around to save me from going insane...?
Thanks a lot
xxx A. Tag: Censored... Tag: 11666
Better quality movie
I am connecting my Sony TRV38 to the computer via a USB2
port. It captures the video great. I save the movie to my
computer using dv-avi setting.I am burning the dvd with
sonics MyDVDle that came with the computer.I am not happy
with the final quality of the movie. Should I be using a
IEEE1394 cable to get better quality or do I need to
upgrade MyDVD. Tag: Censored... Tag: 11663
Program Crashes after any edit attempt
Movie maker crashes to desktop after any attempt to edit
the video. It connected and downloaded the video from the
cam-corder just fine, stored it, but whennever I attempt
to do any editing to it it crashes to the desktop.
I tried unistalling and reinstalling it, no difference.
Any suggestions, besides trying (buying) another program? Tag: Censored... Tag: 11656
MPG file editing and audio sync problem
I am having a problem with WMM 2 keeping sound in sync
with video in a large MPG file.
I am using a Hauppauge PVR-250 video capture card to
capture 24 minutes of video and audio. This equates to a
file about 1.5 GB in size. The file loads in WMM 2
without any issues and plays perfectly. I used WMM 2 to
cut off about 5 seconds from the end of the file (some
video I didn't want) and checked my playback...no
problems. The movie is how I want it and no sync
problems. When I save the movie as a WMV, the audio is
out of sync. It starts in sync but appears to lose a
second every 7-9 minutes. By that, I mean that by 7-9
minutes into the movie, the audio is playing about one
second or so off the scene the video displays the source
of the sound (eg. someone talking)...and this gets
progressively worse. I am not sure if I am skipping some
step in the process of saving or editing the movie but I
am having no luck finding anything indicating what I am
doing wrong.
Has anyone else seen this and, if so, what is the fix? Tag: Censored... Tag: 11654
Audio pop/hiss
When I make my movie via movie maker and play them back
all is fine sound wise. My problems occur when I convert
the file to avi or mpeg format and then I get a popping
sound similiar to the way an old vinyl record would sound
when recorded to cassette. Any ideas or suggestions as to
what the cause could be and/or any solutions? Thanks in
advance for any help.
Chris Tag: Censored... Tag: 11653
AVI files problems with sound
My AVI videos will have perfect sound until I drop them in
the storyboard and try to play them. There is either no
sound or a metallic piercing sound. I can import a music
file, and change the functions to have zero video audio
and all music, and that will play fine.
But if I want to creat movies that use my video's sound it
won't work. Please HELP me ... I have no idea why it is
doing this.
Thank you in advance.
-jt Tag: Censored... Tag: 11651
GREAT WAY TO MAKE MONEY- READ THIS!!!!!!!
HOW TO TURN $6 INTO $6,000!!!!!! READING THIS COULD CHANGE YOUR LIFE! I found
this on a bulletin board and decided to try it. A little while back, I was
browsing through newsgroups, just like you are now, and came across an article
similar to this that said you could make thousands of dollars within weeks
with only an initial investment of $6.00! So I thought, Yeah right, this
must be a scam,but like most of us, I was curious, so I kept reading. Anyway,
it said that you send $1.00 to each of the 6 names and address stated in
the article. You then place your own name and address in the bottom of the
list at #6, and post the article in at least 200 newsgroups. (There are thousands)
No catch, that was it. So after thinking it over, and talking to a few people
first, I thought about trying it. I figured: what have I got to lose except
6 stamps and $6.00, right? Then I invested the measly $6.00. Well GUESS WHAT!!...
within 7 days, I started getting money in the mail! I was shocked! I figured
it would end soon, but the money just kept coming in. In my first week, I
made about $25.00. By the end of the second week I had made a total of over
$1,000.00! In the third week I had over $10,000.00 and it's still growing.
This is now my fourth week and I have made a total of just over $42,000.00
and it's still coming in rapidly. It's certainly worth $6.00, and 6 stamps,
I have spent more than that on the lottery!! Let me tell you how this works
and most importantly, why it works....Also, make sure you print a copy of
this article NOW, so you can get the information off of it as you need it.
I promise you that if you follow the directions exactly, that you will start
making more money than you thought possible by doing something so easy! Suggestion:
Read this entire message carefully! (print it out or download it.) Follow
the simple directions and watch the money come in! It's easy. It's legal.
And, your investment is only $6.00 (Plus postage)
IMPORTANT: This is not a rip-off; it is not indecent; it is not illegal;
and it is virtually no risk - it really works!!!! If all of the following
instructions are adhered to, you will receive extraordinary dividends.
PLEASE NOTE: Please follow these directions EXACTLY, and $50,000 or more
can be yours in 20 to 60 days. This program remains successful because of
the honesty and integrity of the participants. Please continue its success
by carefully adhering to the instructions. You will now become part of the
Mail Order business. In this business your product is not solid and tangible,
it's a service. You are in the business of developing Mailing Lists. Many
large corporations are happy to pay big bucks for quality lists. However,
the money made from the mailing lists is secondary to the income which is
made from people like you and me asking to be included in that list. Here
are the 4 easy steps to success:
STEP 1: Get 6 separate pieces of paper and write the following on each piece
of paper;PLEASE PUT ME ON YOUR MAILING LIST. Now get 6 US $1.00 bills and
place ONE inside EACH of the 6 pieces of paper so the bill will not be seen
through the envelope (to prevent thievery). Next, place one paper in each
of the 6 envelopes and seal them. You should now have 6 sealed envelopes,
each with a piece of paper stating the above phrase, your name and address,
and a $1.00 bill. What you are doing is creating a service. THIS IS ABSOLUTELY
LEGAL! You are requesting a legitimate service and you are paying for it!
Like most of us I was a little skeptical and a little worried about the legal
aspects of it all. So I checked it out with the U.S. Post Office (1-800-725-2161)
and they confirmed that it is indeed legal! Mail the 6 envelopes to the following
addresses:
#1) Socorro Badar 6833 Louise Avenue Lake Balboa CA 91406
#2) Stephanie Hicks 1283 Evening Canyon Henderson NV 89014
#3) Matt Madracki P.O. Box 1529 Sutton West, Ontario L0E 1R0
#4) Corey Heck 1721 F St. Apt 3A South Sioux City Ne. 68776
#5) Reynaldo Villasenor P. O. Box 57632 Sherman Oaks CA 91413
#6) M. S. V. 20323 Via Medici Northridge CA 91326
STEP 2: Now take the #1 name off the list that you see above, move the other
names up (6 becomes 5, 5 becomes 4, etc...) and add YOUR Name as number 6
on the list.
STEP 3: Change anything you need to, but try to keep this article as close
to original as possible. Now, post your amended article to at least 200 newsgroups.
(I think there are close to 24,000 groups) All you need is 200, but remember,
the more you post, the more money you make! This is perfectly legal! If you
have any doubts, refer to Title 18 Sec. 1302 & 1341 of the Postal lottery
laws. Keep a copy of these steps for yourself and, whenever you need money,
you can use it again, and again.
PLEASE REMEMBER that this program remains successful because of the honesty
and integrity of the participants and by their carefully adhering to the
directions. Look at it this way. If you are of integrity, the program will
continue and the money that so many others have received will come your way.
NOTE: You may want to retain every name and address sent to you, either on
a computer or hard copy and keep the notes people send you. This VERIFIES
that you are truly providing a service. (Also, it might be a good idea to
wrap the $1 bill in dark paper to reduce the risk of mail theft.)
So, as each post is downloaded and the directions carefully followed, six
members will be reimbursed for their participation as a List Developer with
one dollar each. Your name will move up the list geometrically so that when
your name reaches the #1 position you will be receiving thousands of dollars
in CASH!!! What an opportunity for only $6.00 ($1.00 for each of the first
six people listed above) Send it now, add your own name to the list and you're
in business!
---DIRECTIONS ----- FOR HOW TO POST TO NEWSGROUPS------------ Step 1) You
do not need to re-type this entire letter to do your own posting. Simply
put your cursor at the beginning of this letter and drag your cursor to the
bottom of this document, and select 'copy' from the edit menu. This will
copy the entire letter into the computer's memory.
Step 2) Open a blank 'notepad' file and place your cursor at the top of the
blank page. From the 'edit' menu select 'paste'. This will paste a copy of
the letter into notepad so that you can add your name to the list.
Step 3) Save your new notepad file as a .txt file. If you want to do your
postings in different settings, you'll always have this file to go back to.
Step 4) Use Netscape or Internet explorer and try searching for various newsgroups
(on-line forums, message boards, chat sites, discussions.) I found that if
you go to Yahoo and register there you will find a ton of message boards
to post it.
Step 5) Visit these message boards and post this article as a new message
by highlighting the text of this letter and selecting paste from the edit
menu. Fill in the Subject, this will be the header that everyone sees as
they scroll through the list of postings in a particular group, click the
post message button. You're done with your first one! Congratulations...THAT'S
IT! All you have to do is jump to different newsgroups and post away, after
you get the hang of it, it will take about 30 seconds for each newsgroup!
**REMEMBER, THE MORE NEWSGROUPS YOU POST IN, THE MORE MONEY YOU WILL MAKE!!
BUT YOU HAVE TO POST A MINIMUM OF 200** That's it! You will begin receiving
money from around the world within days! You may eventually want to rent
a P.O.Box due to the large amount of mail you will receive. If you wish to
stay anonymous, you can invent a name to use, as long as the postman will
deliver it. **JUST MAKE SURE ALL THE ADDRESSES ARE CORRECT.**
Now the WHY part: Out of 200 postings, say I receive only 5 replies (a very
low example). So then I made $5.00 with my name at #6 on the letter. Now,
each of the 5 persons who just sent me $1.00 make the MINIMUM 200 postings,
each with my name at #5 and only 5 persons respond to each of the original
5, that is another $25.00 for me, now those 25 each make 200 MINIMUM posts
with my name at #4 and only 5 replies each, I will bring in an additional
$125.00! Now, those 125 persons turn around and post the MINIMUM 200 with
my name at #3 and only receive 5 replies each, I will make an additional
$626.00! OK, now here is the fun part, each of those 625 persons post a MINIMUM
200 letters with my name at #2 and they each only receive 5 replies, that
just made me $3,125.00!!! Those 3,125 persons will all deliver this message
to 200 newsgroups with my name at #1 and if still 5 persons per 200 newsgroups
react I will receive $15,625,00! With an original investment of only $6.00!
AMAZING! When your name is no longer on the list, you just take the latest
posting in the newsgroups, and send out another $6.00 to names on the list,
putting your name at number 6 again. And start posting again. The thing to
remember is: do you realize that thousands of people all over the world are
joining the internet and reading these articles everyday?, JUST LIKE YOU
are now!! So, can you afford $6.00 and see if it really works?? I think so...
People have said, "e;what if the plan is played out and no one sends
you the money? So what! What are the chances of that happening when there
are tons of new honest users and new honest people who are joining the internet
and newsgroups everyday and are willing to give it a try? Estimates are at
20,000 to 50,000 new users, every day, with thousands of those joining the
actual internet. Remember: play FAIRLY and HONESTLY and this will really
work.
----== Posted via Newsfeed.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeed.com The #1 Newsgroup Service in the World! >100,000 Newsgroups
---= 19 East/West-Coast Specialized Servers - Total Privacy via Encryption =--- Tag: Censored... Tag: 11644
Saving to video
Hi
Is there an add on which will let me use WMM to save a file to my VCR? I have a Pinnacle Studio AV/DV which has a composite video out to my VCR. I see that Sonic MyDVD will let me write DVDs. Anything like that for VHS Video Tape. Any help would be appreciated. Thanks. Tag: Censored... Tag: 11643
trying to upgrade movie maker to version 2- error
I get the following error: setup was unable to upgrade
the windows installer
I am running XP. I am able to install updates from
Microsoft. This is the first time I have encountered this
error. This occurs even when I went to safe mode. Tag: Censored... Tag: 11642
Condensing
I am very new to this. All I want to do is record a 30min video on to a CD, but it will only record 12min. How can I get round this??? Please help. Thanks Tag: Censored... Tag: 11641
still very bad video:
Am still getting very jagged and choppy video; I'm using Firewire, and have lots of speed, power and memory. (Sheesh, more thatn I got at 52!) please, any recommendations
am using Windows XP Hom
Sony TRV-19 mini-d
Thanks, Michael Tag: Censored... Tag: 11636
Inability to insert still photo in video.
Using Windows XP with Movie Maker 2, insertion of a still
photo failed. The Video clip to be displaced always ends
up in front of the still clip when video clip to be
replaced is dragged to the audio time line as instructed
and the audio track is missing below the still photo
inserted clip.
I am using a Pavillion a250y 120 gig HD and 512 memory
with a 260 GH CPU. Hard drive has been defragged and
software restored to time of hard drive restoration. I
find no instructions on still photo insertion in the
Windows Movie Maaker 2 Zero to Hero" book. Thanks in
advance. Tag: Censored... Tag: 11634
is it possible to get more bass ona particular bit of the movie
and is it also possible to get a censor bit on a bit of the movie??
please help??