Capturing sound with video using older style video 8 recorder

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Long conversion times Hello, I am new to the use of Windows Movie Maker. I capture a move from my DV camara or my video out card and it takes 210-260 mins to convert or "make movie", is this normal? Is there anyway to cut down on these times? I usually attempt to capture on a "high quality" setting. Thank you Steve Tag: Capturing sound with video using older style video 8 recorder Tag: 10104
  - 2
    - Burn to DVD I made my first movie in MM2. Easy and I liked it...the only problem I have is burning it to DVD. I have the MyDVD program version 4.5. I had to first save the MSWMM file that MM2 creates to a WMA file. I then open that file wity MyDVD and tried to burn the DVD. It was less than stellar..omly 30 seconds of my 7 minute video was burned and none of the audio. I wanted to use another program but cannot figure out if I can export the WMA file as an MPEG file. Is there a media converter that can do this???? Tag: Capturing sound with video using older style video 8 recorder Tag: 10103
  - 3
    - Burn to DVD Tag: Capturing sound with video using older style video 8 recorder Tag: 10102
  - 4
    - MPEG files When I load mpeg files into MM2 I can not save them as a movie file. The only message I get is that MM dose not respond and I an forced to exit program. All other types of files seem to work fine. Tag: Capturing sound with video using older style video 8 recorder Tag: 10096
  - 5
    - DVD Playback quality I am currently using a digital camcorder that only has DV-OUT. My intention is to use MM2 to edit my movies and then burn them to DVD using MyDVD5. Should the end qulaity of my DVD based movie be close to the original recording or will I notice a vast difference? I have read that the best option is to output back into the camera and then record off that, as my camera does not have DV-IN this is not possible, I have considered changing the camera but would prefer not too. As a novice, I enjoy using MM2 because of it's simplicity, how easy is MyDVD5 to use? should I just use this to burn the DVD and do all editing in MM2 still? Any advice greatly appreciated, thanks in advance. Tag: Capturing sound with video using older style video 8 recorder Tag: 10092
  - 6
    - Importing video into wmm2 I use a Sony Cybershot digital camera to capture short video. I used to be able to import in mm2 no problem. Now, every time I attempt to import a video clip, it shuts mm2 down and attempts to send a error report to Microsoft.com. Help! Tag: Capturing sound with video using older style video 8 recorder Tag: 10090
  - 7
    - Preview Monitor I am having problems with the play back of a movie project. When I saved it and then reopened it the preview monitor has a white screen. When I play the timeline it does not show the project just this white screen. Tag: Capturing sound with video using older style video 8 recorder Tag: 10088
  - 8
    - Canon ZR70MC not recognized by XP & system freezes Hi, I have trouble with the following configuration - ACER TM 233 LC notebook, Windows XP home OEM with ALL newest updates (clean installation - new DeLock CardBus Firewire 3Port (IEEE 1394 compilant hostadapter) for the PCMCIA slo - new Canon Camcorder ZR70M - new firewire cable 6- ------------------------------------ When plugging the Firewire adapter, the necessary drivers are automatically installed by device manager When plugging the camcorder, most of the times just nothing happens - eventhough I installed the XP patch Q329256 for correct firewire enumeration, the camcorder is almost never recognized. If the camcorder is detected (maybe one of 20 times), I start video capturing (MovieMaker 2) and suddenly the whole system freezes completely after a few seconds -> hardware reset is necessary WindowsXP automatically sets 4 times the same IRQ "17" for - Crystal WDM AC'97Driver for ICH4 (Audio-Controller - O2Micro OZ6912-CardBus-Controller (PCMCIA-Adapter - VIA OHCI-compilant IEEE 1394-hostcontrolle - driver for the internal AC'97 Link mode might this be a problem In the System-information program (msinfo32.exe) everything shows "OK" Please help me to resolve this ! Is there any WORKAROUND immeadetly available ?? I am a software engineer, but I really dont know what to do - after trying everything for 3 days now Is it necessary to change certain BIOS parameters like PCI IRQ Routing Many thanks in advance Constantin Coret Tag: Capturing sound with video using older style video 8 recorder Tag: 10087
  - 9
    - Locking/Snapping clips to timeline? Is there anyway to lock down or "snap" clips to the timeline?...I have music that I am using and want certain clips/transitions to occur at specific times during the music, but when I trim/edit any of the clips prior to the transition, then everything is offset from the music. Then I have to go back and sync up the clips to the music (becoming really annoying) If this is not possible in MM2, are there any other programs that support this function? Thanks for any help! Tag: Capturing sound with video using older style video 8 recorder Tag: 10085
  - 10
    - Collections will not open I saved all of my movies and the collections come up but they will not play. When I click on any of the collections none of the scenes show. Also, the play/pause button will not highlight, what happened? Tag: Capturing sound with video using older style video 8 recorder Tag: 10081
  - 11
    - Locking/Snapping Clips to Timeline? Is there anyway to lock or snap specified clips to the timeline?...I have background music, and I have certain transitions that I want to keep with certain beats/music changes. Everytime I make any edits, this affects the rest of the timeline and I have to go back and spend additional time readjusting everything. Hopefully, I am overlooking something :) Thanks for the help! Tag: Capturing sound with video using older style video 8 recorder Tag: 10078
  - 12
    - credits and movie size my credits at the end of my movie cut short when i,ve only put 4 or 5 lines in it. it looks right in wmmii but when i record it back to my camcorder it is cut short, also what is the best file size for importing into wmmii and editing? any help would be great thanks gary Tag: Capturing sound with video using older style video 8 recorder Tag: 10076
  - 13
    - Plays only on CD-RW? I recently made my first movie with movie maker2. I saved the movie to my hard drive. Then burned the movie to my CD. When I tried to play the movie in my CD-R the drive would't recognize it. It kept requesting for a CD to be installed. But when I put it back in my CD-RW it work fine. I took the CD to a friends computer and his CD-R would'nt read it but his CD-RW would. What is the problem? Tag: Capturing sound with video using older style video 8 recorder Tag: 10072
  - 14
    - Playing files My WMM used to play fine. Now, it will play a clip or group of clips once. When I try to continue play after pressing stop or rewind, the clip will not play. Sometimes the counter will move but I always get a black screen. Also, I can no longer switch to full screen mode. Tag: Capturing sound with video using older style video 8 recorder Tag: 10066
  - 15
    - mm2 distorts sounds or won't play at all I have been working on a mm project for my family that is using strickly pictures (no movie clips) and sound. I was using .wav files and everything was working fine. When I came back to the project a few days later only 2 of the 20 sounds I used worked properly. The rest either played at 2-3x the speed or it just sound like a squelchy white noise. I found that the 2 sounds that did work were mp3's. Soooooooo, I changed my sounds to mp3s' but excluding the 2 mp3's that originally worked all the mp3's are doing the same thing. I have tried everything that I can think of. I have made no recent changed to MM and infact updated it to MM2 to see if it would solve the problem, which it didn't.......ANY HELP WOULD BE GREATLY APPRECIATED!!!! Tag: Capturing sound with video using older style video 8 recorder Tag: 10065
  - 16
    - Titles and Audio Sync I insert titles into footage using mm2. All seems OK and I burn the project to DVD using MY DVD. When I view the finished DVD, one of the titles has made the audio on all the following footage to be out of sync, the same time delay as the length of the title. Take this title out and the sync is fine. The other titles cause no problem. I have experimented with different ways of inserting titles and the sequence of adding footage afterward, but can't work out why the difference! What is the right way to insert titles into footage? It is a pity this is not covered in MM2 Help. Would appreciate some help before I lose the will to live. Thanks Peter Tag: Capturing sound with video using older style video 8 recorder Tag: 10064
  - 17
    - Freezing of project when saving I am not able to save a project as a movie nor save/record into dv. After about 20-25 minues the process freeze . How can I fix this problem? Only able to save files less than 300 MB. I have a 3.06gh / 60gb . If it is impossible to save larger files, how do I break up a project into smaller p.? Tag: Capturing sound with video using older style video 8 recorder Tag: 10062
  - 18
    - Deactivation of audio clips When I paste an audio clip in MovieMaker2 in same time with original audio of video clip made with a DV camera, it seems to be impossible deactivation of the original audio. In the storyboard the original audio track appears deactivated (a line) but it can be always heard together with the inserted audio cli Is that a fault of mine or a software bug Thanks for any hel Lenn Tag: Capturing sound with video using older style video 8 recorder Tag: 10060
  - 19
    - CANT SAVE!!! okay, instead of getting some lame stupid message saying i cant save.... nothing happens at all, i cant even access the options part of the menu, ive tried reinstalling, WHAT DO I DO! Tag: Capturing sound with video using older style video 8 recorder Tag: 10055
  - 20
    - Can only play my movie on a rewritable drive? I have made a movie of my girls in venice and would like to send it to them. But I can only replay it on my CDRW drive. When I tried it on my CD rom drive it would not recognize it. I took it to a friends house to see if he could play it on his CD rom player. But he also could only play it on his CDRW drive. What am I doing wrong or what is the problem? Tag: Capturing sound with video using older style video 8 recorder Tag: 10054
  - 21
    - Break Down I have a large home movie file, approx. 900MB, that I have made. Each time I attempt to save as a movie file before burning to a DVD movie maker stops saving. The movie records approximately 20 minutes, or less, and then only records audio after that. The video freezes on a particular clip. Each time the clip is different and can be within minutes of the others. I have 512MB RAM with a 2.6 GHz processor...is this a problem with the movie maker program and if so how can I fix it? Tag: Capturing sound with video using older style video 8 recorder Tag: 10051
  - 22
    - No Audio I forgot to give my email address with post #1. When capturing to Windows Movie Maker, the audio will not record. I have another program (OHVIDEO) that does record audio, but it will not allow me to rercord to the camcorder. What do I need to do to correct this problem. Tag: Capturing sound with video using older style video 8 recorder Tag: 10047
  - 23
    - importing AVI clips Is there any way to take separate .avi file clips and import them into a single collection. so far, whenever I do this, i get a separate collection for each clip Tag: Capturing sound with video using older style video 8 recorder Tag: 10046
  - 24
    - Can't Import an MP2 file! Greetings When I try to import an MP2 file captured with my ATI card and ATI software I get this error from WMM2 "The file C:\Documents and Settings\Steve\My Documents\My Videos\Captured with ATI\movie.mp2 is an empty file" The file plays fine on the ATI software as well as NeoDVD. Even Windows Media Player will open and play the file although it plays a little jumpy I sure could use some help Thanks Stephen Tag: Capturing sound with video using older style video 8 recorder Tag: 10045
  - 25
    - Help! My Windows Movie Maker has the immensely frustrating habit of shutting itself off during editing. I tried slowing down the acceleration, but no joy. I read elsewhere that I may have a codec issue, but though I've tried messing about with Zoomplayer, I'm not entirely sure what I'm supposed to be doing. I'm slowly losing the will to live so any advice would be very welcome. Tag: Capturing sound with video using older style video 8 recorder Tag: 10042
- Next
  - 1
    - No Audio when playing back video I have my video camera connected to my computer via USB. I can record video fine but there is no audio associated with it even in playback. Is there something special that needs to be done to copy the audio along with the video? Tag: Capturing sound with video using older style video 8 recorder Tag: 10040
  - 2
    - movie maker help The FBI has been harassing and mentally torturing me for two and half years since around Oct 01. The FBI has installed gps tracking devices in my car, tracked me like an animal, wire tapped my phone and has been monitoring all my web surfing activities for 2.5yrs and completely dehumanized me. The FBI agents have been following me 24X7X60X60 everywhere including grocery stores, retail stores, malls, restaurants and movie theaters. The FBI agents who were following me have at times verbally and racially abused me in retail store and grocery store parking lots by shouting at me inanities. One FBI agent once tried to ram into my car from behind with a comcast van and came within one inch of hitting me from behind. There was no traffic altercation between us and there was no traffic on the road. The FBI agent in the comcast van never tried to overtake me and was very angry at me and hated me for no reason. I have been unemployed for close to 3 yrs and When I send resumes to potential employers, the sadistic FBI agents who were monitoring my email and websurfing, have been badmouthing and assasinating my character with recruiters and jeopardizing my job opportunities for the last 2.5 yrs. The FBI has been interfering in my personal life for no reason. The FBI has completely destroyed and denied me any sort of privacy for 2.5 yrs. Each and every word I type and post on the web is being monitored and each and every email tapped. The sadistic FBI has forced me to live like a virtual prisoner for 2.5 yrs with zero privacy and 24 hr real time video focused on me. I cant talk to friends, family members and prospective employers without the fear of being over heard and recorded. I am afraid of doing everything and anything without fear. I am not a terrorist. I am not even a muslim. I dont have any muslim friends. I am not a drug smuggler. I did not kill anybody. I did not threaten to kill anybody. I dont have a record like gottis or escobars. I do not have any prior criminal record. Why should I suffer all this harassment and constant loss of privacy for such an extended period of time. I feel completely naked infront of the world and it has been like that for a couple of years. I am not familiar with US legal system that much. Can somebody tell me why the sadistic FBI has such ridiculous amount of power to harass and mentally torture me. WHy do the FBI has the right to think they are God and they are always right. WHy should my life depend on what the FBI thinks of me. Why should I be put through so much pain and suffering. Why do the FBI has the right to deny me privacy for so long. Who gave the FBI the right to interfere in my personal life and bad mouth and assasinate my character with potential employers. Why are the FBI agents telling employers not to hire me. As it is, it is very difficult to find a job in this economy and whatever few opportunities I get are being screwed by these fbi sadists. On what basis, the FBI installed a gps device in my car and tracking me like an animal. On what basis did the FBI wire tap my phone. On what basis did the FBI tap and monitor my web activities and email for 2.5 yrs. I feel as if I was put in a 6x6 cell with 24X7 video focused on me and fbi agents standing around the cell and constantly poking me with sticks. One undercover FBI agent sent an email and called me a dumbass. His email is sfrank9@aol.com and his ebay id is spodekmodek. Lot of FBI agents are harrassing me 24X7 in vehilces with michigan title plates UFX 210 (white SUV), XRA 155 (black car), BOGEY 27 (black car), PPL 587 (red car). Assume everything I said is true and somebody with legal knowledge and expertise help me out here. I do not have access to us.legal and misc.legal usenet news groups. I would appreciate if somebody can do a cut and paste this into us.legal and misc.legal news groups. Tag: Capturing sound with video using older style video 8 recorder Tag: 10038
  - 3
    - No Audio When capturing video to Windows Movie Maker from a camcorder it will not record the audio. My other software will, but it will not allow me to rerecord to the camera. What can I do to solve this problem? Tag: Capturing sound with video using older style video 8 recorder Tag: 10036
  - 4
    - PC will not recognise my camera Hi! I have a Panasonic DV camera that I want to hook up to my DELL Latitude. It has worked before, bit now suddenly it do not respond when attaching the FireWire cable. Usually it finds the camera emmediately. Anyone?? Fredrik Tag: Capturing sound with video using older style video 8 recorder Tag: 10030
  - 5
    - Burning to DVD I made my first movie last night. I went to burn it to DVD on my Sony Burner and it says something about invalid format or file extension? It also says it need to be in NTSC or PAL format. Do I need to convert it somewhere next from .WMA format? Thanks in Advance Mark T Tag: Capturing sound with video using older style video 8 recorder Tag: 10028
  - 6
    - Capturing Video After plugging the camera in & trying to capture video, it keeps coming up with the msg; "An interface has to many methods to fire events from" - what the hell does this mean? It wont let me do anything. Please someone help, i'm so frustrated! Tag: Capturing sound with video using older style video 8 recorder Tag: 10027
  - 7
    - CES Announcements and MM2 The annual tradition of making significant announcements at the Consumer Electronics Show (CES) continues... on Wednesday Bill Gates made the keynote address to the attendees, Press Releases have been streaming out, and some websites are overloaded with traffic. ... so what's in it for users of Movie Maker 2? - here's two things I see: 1... The first of a new boxed 2-disc set of movies is now available for purchase. The movie is Coral Reef Adventure which was made for IMAX Theatres. The first disc in the set isn't that newsworthy as it is a standard DVD. But the second disc is a new WMV-HD disc (High Definition), which has two copies of the movie in WMV format. The WMV files have over 6 times the resolution of the DVD version. And the movie is really great. One copy is 1280x720 and runs smoothly on my laptop, which meets the recommended minimum CPU of 2.4 GHz. The other copy is 1440x1080 and doesn't run smoothly for me.... it needs the recommended 3.0 GHz CPU. For Movie Maker 2 users, I studied the parameters of the 1280x720 file and made a custom profile so I can take my widescreen holiday videos and produce them at those settings... the only thing I had to compromise on was the audio... MM2 is limited to 2 channel stereo and the disc has 5.1 sound. I put a copy of my custom profile on the website and updated the Saving Movies > Custom WMV Profiles page with some info and a link to it... 2... DVD players that support the WMV format are on the horizon for April... I updated the CD Burning > HighMAT page of my website and included a few links... The error message when clicking on the Apex link seems due to '... the amount of traffic exceeds the Web site's configured capacity...' _________________ PapaJohn www.papajohn.org Tag: Capturing sound with video using older style video 8 recorder Tag: 10026
  - 8
    - Movie file too big to copy from hard disk I have created an edited movie that is almost 15GB... my hard drive is a 30GB and I can't create enough temp file space to copy the movie over to a DVD or DV-Camera... My questions are these: 1. Is there a way to compress the original capture file to a smaller size than the 15GB? 2. The eidted master file for the movie is only 1.5GB (about 50 mins of content) ... is there someway to delete the original capture keep the edir file and then 'compress' the original capture. 3. I've tried freeing disk space but I don't have enough resident on the C: drive... I have an external drive E: that can hold 120GB. Can I use that as a temp storage swap drive? 4. I can't even copy the original capture to my external because it's just too big to come out of my laptop... any ideas will be greatly appreciated as this project took me 4 days of editing and I'd hate to start from scratch... P.S. - If I do have to start over what is the largest 'safe' file to work with? Tag: Capturing sound with video using older style video 8 recorder Tag: 10024
  - 9
    - "A video capture device was not detected...." why? Shiney new Sony PC-RS430G, everything works as advertised...save for MM2. When I select "Capture Video" MM2 simply responds that "A video capture device was not detected...". There aren't any controls (that I can find) that allow me to teach the darn software about the fact that I do have a video capture device... that works just fine with "Sony" applications (which generally suck badly). Tag: Capturing sound with video using older style video 8 recorder Tag: 10023
  - 10
    - Stupid question, annoying problem....help? Everytime I try and open files that I am editing in Windows Movie Maker, it will load the project but whenever I go to play the movie or do anything to it in any sense...Windows Movie Maker closes! It doesn't close when I play files that I've captured and have in my "collections" but it instantly closes whenever I attempt to do anything to an edited project. Argh! What am I doing wrong? Please help someone, this is so frustrating! Thanks very much = ) Tag: Capturing sound with video using older style video 8 recorder Tag: 10022
  - 11
    - CODEC - Where I can get it to play MPEG2? WMM won't import mpg video.. It says I don't have CODEC??? Tag: Capturing sound with video using older style video 8 recorder Tag: 10021
  - 12
    - movie Made a movie with windows movie maker how do transfer it to DVD form windows I have roxio DVD burner Tag: Capturing sound with video using older style video 8 recorder Tag: 10018
  - 13
    - Help with editing audio in mm2 needed - please I have created a project with a series of video clips (with audio) interspersed with the odd title page and still photo. What I now want to do, is to overlay some audio/music soundtracks that only play during the title pages or over selected stills, allowing the sound of the video to play when they come into view. Therefore, I'm looking at being able to set the audio/music to fade out when it comes to a selected point, the video/audio comes in at this point, then the music audio fades back in at the selected point, which would be at the end of a video section. However, I do not want to keep re-starting the same music/audio at the beginning, basically, I want to mute or pause the music at certain points for specific durations. It seems a basic requirement to me but this is the first time I've done anything like this and I can't find a way of doing it. Can it be done and how? Many Thanks Steve Tag: Capturing sound with video using older style video 8 recorder Tag: 10017
  - 14
    - CAPTURE PROBLEM I just purchased a new dell 8300 with movie maker. When I attempt to capture via my vcr, it says device is not responding, close down any application that may be using the device. I'm not using anything else. I have Prime Time on my computer was told to shut it down and reboot but that doesn't help. Tag: Capturing sound with video using older style video 8 recorder Tag: 10016
  - 15
    - Movie Maker crashes When I attempt to "Save Movie File", Movie Maker crashes, and it also crashes whenever I do anything with the storyboard / timeline Tag: Capturing sound with video using older style video 8 recorder Tag: 10015
  - 16
    - "Unspecified Error" when opening MM2 When I try to open Movie Maker 2 or Microsoft Producer 2003, I get an "Unspecified Error" message and the application fails to open. The problem seems to be specific to my Windows XP profile (i.e. when I'm logged on as someone else it works fine), but this presents a significant problem to me. Has anyone seen this problem? It must lie in some shared component between the two applications. Thanks. Tag: Capturing sound with video using older style video 8 recorder Tag: 10014
  - 17
    - movie maker in XP i downloaded some footage which i took with a SONY DIGI CAM ..and i success fully got them into my system which is PIV,128 MB RAM,60 GB hdd 1.7 ghz mpc... till now i have been taking experimental footage with creative web cam and just trying to learn how to edit movies etc which has never given me any problems...but the footage that came from the SONY DIGI CAM...i have multiple issues to report.. 1.the footage take's a whole lot of time to run. 2.the footage takes life time to get edited. and.. 3.when i finally get the footage edited and open choose the option save movie it give's me an error - to check if the source file location is valid (which it is )and check if there is enough disk space(60 GB'S!!) --I need to know if there id any thing wrong with my PC...AND IF i need to upgrade ram etc ... i am getting a handy cam soon so please guide me... rgrds iqbal yaqub Tag: Capturing sound with video using older style video 8 recorder Tag: 10012
  - 18
    - compressing the mpegs well first of all can mpegs be used to make movie in movie maker...the source is a sony digital camera... i have mpegs abt max 6 sec long and i will have closer to hundred such scenes... this would mean 600 mb or more than that... a five minute movie and i do not think i can get this across seven seas back to india in any way ... any ideas ??? Tag: Capturing sound with video using older style video 8 recorder Tag: 10011
  - 19
    - Flicking When looking at the TV using Windows Movie Maker there is a constant flicking on the screen and so recording is no good. Can you please help. Tag: Capturing sound with video using older style video 8 recorder Tag: 10005
  - 20
    - virus After I declared my e-mail in this newsgroups I receaved messages containing virus from: "MS Net Message Storage System" <emailrobot@freemail.com> "MS Net Message System" <masterdaemon@america.net> "MS Security Assistance" <ljrfrkjyjmdw@news.microsoft.com> "Microsoft Corporation Customer Assistance" <astwknciuebrxz@ltybu.com> At least it was what my e-mail provider have warned, and put those files in quarentine. Users, please be aware and I hope Microsoft would verify this trouble. Thanks Tag: Capturing sound with video using older style video 8 recorder Tag: 10004
  - 21
    - MovieMaker I am Unable To Save My Movie. After I completed My Movie I hit save to my computer all it does is mount up the time. This problem is the same on all the computer in my home.How do I go about uninstaling Moviemaker and reinstaling it. There isn't any error message it just freeze up. Tag: Capturing sound with video using older style video 8 recorder Tag: 9997
  - 22
    - MM2 movie skips during title pages on DVD, problem not present in preview Ok, I've made several movies in MM2, they look and sound great in preview on MM2. I am saving them as DV-AVI files and using Roxio ECDDVDC to burn to DVD. When I preview the movie in Roxio, it looks fine. However, the movie on the DVD stalls, and stutters (including audio cutout, dropped frames, etc.) during titles. If the titles are animated the problem is worse. I exported the movie back to my camcorder and it played just fine, however, when I re-imported the movie from the camcorder into a new MM2 project and burned the resulting movie, it had all the same problems the first dvd had. I have no problems with audio cutout or skipping during transitions, and again, everything looks fine, even when previewed in roxio. Tag: Capturing sound with video using older style video 8 recorder Tag: 9995
  - 23
    - Repackage MovieMaker 2 I have a problem repackaging MovieMaker 2 into MSI. When installing I get a logagent.exe error message. Is there any workaround for this? Tag: Capturing sound with video using older style video 8 recorder Tag: 9991
  - 24
    - DV capture freezes -Hotfix?- When trying to capture video VIA firewire from my Sony DCR-TRV230 to Movie Maker the video preview freezes after several seconds and it stops capturing, even though the camera rolls along as if it's still working. I've looked at Papajohn's pages, tried a few things to no avail. Here's the thing: MS has a "Hotfix" on this page: http://support.microsoft.com/default.aspx?scid=kb;EN- US;830363 This is reportedly a "confirmed problem" for XP with SP1 and DirectX 9- my configuration. But I have an OEM version of XP Home, so apparently they want to charge me money for this "Hotfix." Is there any way to aquire the hofix without shelling out more $$$ to MS? Any kind soul out there already download it and willing to share? Many thanks! Tag: Capturing sound with video using older style video 8 recorder Tag: 9990
  - 25
    - problem sending back to dv camera I edited a video clip with sound the size of the file is 37 meg , I'm using a 8mm digital camera. when doing a 5 minute video clip it transfers it ok no problem but when doing a 10 minute video clip it comes up saying it was not successfully recorded into the tape. any ideas? Tag: Capturing sound with video using older style video 8 recorder Tag: 9989

Thanks for the answer to my last question guys. I can sucessfully capture sound and video with my DV camera via firewire. The problem I am now faced with involves the transfer of older movies that were recoreded on my sony video 8 recoreder. I plug the "video" cable from my computer capture device to my video 8. I then connect one end of a "y adapter" to my sound card and the the other to the audio output on the camera. I then start up the Windows Movie Maker software and choose my audio setting. When I am creating the video with Windows Movie Maker I can see and hear my movie in the preview window. When I attempt to playback the newly created files I can see the video but cannot hear the audio. Can anyone help? The old tape is alreading starting to fall apart and I need to convert it ASAP.

Thanks in advance

Steve

Top