Can't capture resolution higher than 352x288

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Saving to DV-AVI loses 6 seconds of movie length Hi there. I am trying to overcome a bug in WMM2 with audio popping when saving to DV-AVI so please someone tell me if I am going about it the wrong way. (The popping apparently comes from the transitions and the audio being saved at the same time; so first I save the slideshow with no audio as an AVI. Then in a second project I use the first silent AVI as the video, add my WMA soundtrack, save as AVI again and voila, no skipping in the final AVI--but it loses 6 seconds). My main goal is to output 12 separate slideshows (with transitions and audio) as separate movies and then burn to DVD using MyDVD. But I do not get that far. An example project has 86 stills and 3 title/overlays with fade transitions in between. I have a WMA file that is 04:41 (4 mins 41 secs) long and I time the transitions using a trick I got from Rehan (thanks by the way) to synch perfectly. In the preview it is great and the audio stops on a dime. However, when I produce any AVI (either the 1st silent or through the 2 pass method) I end up with a shorter movie, namely 4:35 or 6 seconds shorter even though it shows 4:41 in the timeline. It is most obvious when I import the silent AVI into the timeline and it is noticeably shorter. I would not be so picky but the slides are supposed to sync with the music just so and If I just "fade out" early the effect is just not as clean. I use AVIs because of earlier problems I had with WMVs and MyDVD. And to make this more interesting, I do not lose 6 seconds if I save to WMV. Help, please if you can! Tag: Can't capture resolution higher than 352x288 Tag: 32082
  - 2
    - WMM only imports one clip at a time I have just returned from a month's holiday. Just before going away I used WMM and there were no problems. On return, I found that when I import a Video clip or mpeg, it removes any existing clips from the collection and only inserts the last clip in the selection to import. Wonder if this is perhaps a problem that is caused by Auto Update? Any ideas? Tag: Can't capture resolution higher than 352x288 Tag: 32081
  - 3
    - For my son Tony - Problem using MSMC(2004) and MCMM(2.0.3312.0) Hello Everyone, My son Tony has a large collection of VHS tapes (mostly animation cartoon type) that he has recorded himself over the years. I have also taught him how to use computers since he doesn't go to school. Knowing his VHS (and a few old Beta) tapes will get old and deteriorate, I decided to save up and get him a new computer to transfer the video tapes to DVD. Hopefully to edit also. Therefore, I purchased a Dell 8400 with the video capture card and MS Media Center 2004. (I'm having trouble getting the overseas customer support to assist me in upgrading to MSMC 2005). The media center will capture the video (we are using COAX cable for now), (also have s-video, RCA, and comp jacks if really necessary). However, once the videos are captured using the MSMC we are unable to get the Movie Maker (2.0.3312.0) to allow him to edit his captured video which is in "dvr.ms" format. Is there a better product to help him to capture the analog video from VHS and Beta, then edit/clean up to his pleasure, and finally burn to his double layered DVD writer? I'm willing to try and get better software if it is highly recommended and the cost is not prohibitive. But, If everyone suggests using what we have, could someone tell us how best we do that? We appreciate any assistance! Thank you for helping my son Tony get his Videos to DVD!! (his web site - http://www.tonysimaginationlab.com - in case your interested) Mac and Tony Tag: Can't capture resolution higher than 352x288 Tag: 32076
  - 4
    - Sony DCR-TRV520 and I.link/DV Any one have experience with this camera using it as a video capture source? I swear I had it working at one time, quite some time ago, but now MovieMaker says there is no device connected. I have gone round and round on this and am now at my wits end. Any help here woould be most appreciated. More info:: I am using a 4 to 4 pin FireWire cable to connect to a fully patched XP Home machine. Tag: Can't capture resolution higher than 352x288 Tag: 32075
  - 5
    - John Kelly? How do you legally host / post videos that contain material with copy rights; movie clips, songs, etc? E.g., clips from James Bond movies, songs from 'Rush', etc? And, maybe it's just a coincidence, but after asking you this question in another thread it seems like I can no longer access your site. could you explain that as well? This was was in another thread, may be of intrest: Thanks for your comprehensive responses. I now have a better idea where the line is drawn. Perhaps there are a few experts out there that can give us some more information as to how they've secured the rights to post clips which contain copy written songs or clips from movies on the Internet, to be view publicly. After all, all material gained from other sources should be duly acknowledged and if copy rights exist they should be respected. No value is obtained by publishing in any format other peoples work without securing right to do so. "J. Daniel Smith" <J_Daniel_Smith@hotmail.com> wrote in message news:%23MyY%23KqEFHA.1524@TK2MSFTNGP09.phx.gbl... > I'm not a lawyer either. > > If you already own the CD, then using a track as background music for a > personal video would probably be considered "fair use". It's probably not > "fair use" if you download the MP3 from some file-sharing website, > regardless of how you use it (and it's questionable if all you use the MP3 > download for is to save yourself the hassle of ripping the track > yourself). > > Posting on the web might be OK as long as it wasn't at a publicly > accessible URL - i.e., you required a registration/login before viewing. > And even then, it should only be for your personal friends - not your > thousands of internet "friends". > > Dan > > "James E Middleton" <someone@microsoft.com> wrote in message > news:%23dfpK5nEFHA.732@TK2MSFTNGP12.phx.gbl... >> If I make a video in MM2 or Photo Story and use a famous song as the >> background music, is that OK? Does that fall under the 'Fair Use' clause >> of copyright laws, as long as I use it for my own 'entertainment'? Am I >> in violation of copyright laws if I cross the line and post it on the >> Web? Do I need permission from the copyright owner beforehand? Even if I >> don't make any money from showing it, there is some shade of gray there. >> It could be interpreted as being used as a means for personal gain. For >> example, generating traffic on my Web site. I could lure you to my site >> because you may like a particular song. Once there I could propagate my >> message or advertise some other product or service. Just wondering;. I've >> poured through the U.S. Copyright and not being a lawyer, it's all Greek >> to me. >> >> >> >> WHAT IS COPYRIGHT? >> Copyright is a form of protection provided by the laws of the United >> States (title 17, U.S. Code) to the authors of "original works of >> authorship," including literary, dramatic, musical, artistic, and certain >> other intellectual works. This protection is available to both published >> and unpublished works. Section 106 of the 1976 Copyright Act generally >> gives the owner of copyright the exclusive right to do and to authorize >> others to do the following: >> >> · To reproduce the work in copies or phonorecords; >> >> · To prepare derivative works based upon the work; >> >> · To distribute copies or phonorecords of the work to the public >> by sale or other transfer of ownership, or by rental, lease, or lending; >> >> · To perform the work publicly, in the case of literary, musical, >> dramatic, and choreographic works, pantomimes, and motion pictures and >> other audiovisual works; >> >> · To display the copyrighted work publicly, in the case of >> literary, musical, dramatic, and choreographic works, pantomimes, and >> pictorial, graphic, or sculptural works, including the individual images >> of a motion picture or other audiovisual work; and >> >> · In the case of sound recordings, to perform the work publicly >> by means of a digital audio transmission. >> >> In addition, certain authors of works of visual art have the rights of >> attribution and integrity as described in section 106A of the 1976 >> Copyright Act. For further information, request Circular 40, "Copyright >> Registration for Works of the Visual Arts." >> >> It is illegal for anyone to violate any of the rights provided by the >> copyright law to the owner of copyright. These rights, however, are not >> unlimited in scope. Sections 107 through 121 of the 1976 Copyright Act >> establish limitations on these rights. In some cases, these limitations >> are specified exemptions from copyright liability. One major limitation >> is the doctrine of "fair use," which is given a statutory basis in >> section 107 of the 1976 Copyright Act. In other instances, the limitation >> takes the form of a "compulsory license" under which certain limited uses >> of copyrighted works are permitted upon payment of specified royalties >> and compliance with statutory conditions. For further information about >> the limitations of any of these rights, consult the copyright law or >> write to the Copyright Office. >> >> WHAT WORKS ARE PROTECTED? >> Copyright protects "original works of authorship" that are fixed in a >> tangible form of expression. The fixation need not be directly >> perceptible so long as it may be communicated with the aid of a machine >> or device. Copyrightable works include the following categories: >> >> 1. literary works; >> >> 2. musical works, including any accompanying words >> >> 3. dramatic works, including any accompanying music >> >> 4. pantomimes and choreographic works >> >> 5. pictorial, graphic, and sculptural works >> >> 6. motion pictures and other audiovisual works >> >> 7. sound recordings >> >> 8. architectural works >> >> Use of the notice may be important because it informs the public that the >> work is protected by copyright, identifies the copyright owner, and shows >> the year of first publication. Furthermore, in the event that a work is >> infringed, if a proper notice of copyright appears on the published copy >> or copies to which a defendant in a copyright infringement suit had >> access, then no weight shall be given to such a defendant's interposition >> of a defense based on innocent infringement in mitigation of actual or >> statutory damages, except as provided in section 504(c)(2) of the >> copyright law. Innocent infringement occurs when the infringer did not >> realize that the work was protected. >> >> The use of the copyright notice is the responsibility of the copyright >> owner and does not require advance permission from, or registration with, >> the Copyright Office. >> >> Form of Notice for Visually Perceptible Copies >> The notice for visually perceptible copies should contain all the >> following three elements: >> >> 1. The symbol © (the letter C in a circle), or the word "Copyright," or >> the abbreviation "Copr."; and >> >> 2. The year of first publication of the work. In the case of compilations >> or derivative works incorporating previously published material, the year >> date of first publication of the compilation or derivative work is >> sufficient. The year date may be omitted where a pictorial, graphic, or >> sculptural work, with accompanying textual matter, if any, is reproduced >> in or on greeting cards, postcards, stationery, jewelry, dolls, toys, or >> any useful article; and >> >> 3. The name of the owner of copyright in the work, or an abbreviation by >> which the name can be recognized, or a generally known alternative >> designation of the owner. >> >> Example: © 2002 John Doe >> >> The "C in a circle" notice is used only on "visually perceptible copies." >> Certain kinds of works--for example, musical, dramatic, and literary >> works--may be fixed not in "copies" but by means of sound in an audio >> recording. Since audio recordings such as audio tapes and phonograph >> disks are "phonorecords" and not "copies," the "C in a circle" notice is >> not used to indicate protection of the underlying musical, dramatic, or >> literary work that is recorded. >> >> Form of Notice for Phonorecords of Sound Recordings* >> * Sound recordings are defined in the law as "works that result from the >> fixation of a series of musical, spoken, or other sounds, but not >> including the sounds accompanying a motion picture or other audiovisual >> work." Common examples include recordings of music, drama, or lectures. A >> sound recording is not the same as a phonorecord. A phonorecord is the >> physical object in which works of authorship are embodied. The word >> "phonorecord" includes cassette tapes, CDs, LPs, 45 r. p. m. disks, as >> well as other formats. >> >> The notice for phonorecords embodying a sound recording should contain >> all the following three elements: >> >> 1. The symbol (the letter P in a circle); and >> >> 2. The year of first publication of the sound recording; and >> >> 3. The name of the owner of copyright in the sound recording, or an >> abbreviation by which the name can be recognized, or a generally known >> alternative designation of the owner. If the producer of the sound >> recording is named on the phonorecord label or container and if no other >> name appears in conjunction with the notice, the producer's name shall be >> considered a part of the notice. "John Kelly" <not@dot.com> wrote in message news:OJm%23XeTCFHA.3616@TK2MSFTNGP11.phx.gbl... > Hello there, > > Some will be aware of the excellent video's made by Weave using Movie > Maker. He has done it again folks...the new video called FEAR is available > for viewing on The Kelly's website. He told me it would make the hair > stand > up on the back of my neck....he did not tell me what the video was > about...now that I have seen it I understand exactly what he meant....the > message in visual and audio form is well worth experiencing....I first > watched it using a surround system with the volume wound up.....it leaves > you feeling a little cold. A great video with masterfully use of Movie > Maker. > > -- > Best Wishes.....John Kelly > www.the-kellys.org > www.the-kellys.co.uk > Check out free video hosting at www.the-kellys.org > ---- > \|||/ > (oo) > ----------ooO-(_)-Ooo------------- > All material gained from other sources is duly acknowledged. No Value is > obtained by publishing in any format other peoples work Tag: Can't capture resolution higher than 352x288 Tag: 32073
  - 6
    - "Empty" Video File I tried to import a .mpg file from my harddrive into the movie maker and i keep getting an error message that says the file is "empty" i dont know how to get it into the movie maker and i really need to for a school project. I have tried converting it to several other different file types by re-saving it with windows media player and nothing seems to work does anyone have any clue on what i might be able to do to fix this so i can import the file for editing? Any help would be greatly appreciated. Thanks Tag: Can't capture resolution higher than 352x288 Tag: 32069
  - 7
    - Making my movie a DVD I am new to Movie Maker and made (in my opinon) a real good movie. I transferred it from my new Canon Zr80 onto my new Dell Notebook... and it was a breeze. The only thing I dont know how to do is save it/burn it to a dvd. Will someone please help me out here. I dont want this to go to waste and most of my family will only be able to view this if I can get it burned to a DVD. Thanks a million to whomever helps me out on this one !!! coastemac US Coast Guard Tag: Can't capture resolution higher than 352x288 Tag: 32066
  - 8
    - Video will not play in preview window I imported a video clip into WMM. A thumbnail of the video does not appear in the icon for that clip. When I play the clip, the audio plays just fine but the screen remains black. If I drag-n-drop the clip into the timeline, only the audio appears there. Furthermore, in the menu bar on the left side of the screen, if I click on Import Video, WMM freezes; this does not happen if I click on Import Audio or Pictures. The only way I can even bring in a video clip is via the File menu. I'm using Win XP on a Sony Vaio PC; this is WMM v.2.1. I've had this PC for a little over a year, and never had a problem with WMM before. Tag: Can't capture resolution higher than 352x288 Tag: 32059
  - 9
    - Is it possible to batch save a bunch of movies? I have edited a bunch of movies. Since saving takes awhile it's rather inefficient to edit, save, edit, save, etc. I'd rather edit a bunch and then batch the saves so that that time consuming operation can occur when I'm asleep or at work. Is this possible and if so, how? Thanks, Tag: Can't capture resolution higher than 352x288 Tag: 32057
  - 10
    - Can't get to play DVD on standalone player Once project is completed in wmm, what is best way to burn? If I open Nero and Add Video Files, the burning process takes 4 hours for a 40 minute video. If you open project in wmm, and right click on the media file, you can send to sonic which burns the DVD in 2 minutes! Why the difference? Saving the file as DV AVI makes the file 8.28 GB which won't fit on the disk. Saving it as High Quality Video makes the file 471 MB which burns fine. Either way, the disks will not play on a standalone player. When I transferred video from camcorder into wmm and let the defaults save the program as it wanted, it played on the standalone player but the quality was poor as the resolution was low. -- Garyd Tag: Can't capture resolution higher than 352x288 Tag: 32052
  - 11
    - MM2.1 Hi, can anybody tell me how to revert back to the movie maker that came with xp pro, prior to installing sp2 ? the reason i want to do this is that with the older one, imported movies were split up into several clips in the preview pane but they dont do this with sp2's 2.1 version. or can anybody tell me how to make 2.1 show the split clips ?? TIA Chris Tag: Can't capture resolution higher than 352x288 Tag: 32042
  - 12
    - capturing video hi this is my first post im trying to capture video using sony picture package but all it will let me do is make a mini movie with music over please help its driving me nuts model is dcrhc18e thanks. peter Tag: Can't capture resolution higher than 352x288 Tag: 32033
  - 13
    - Problem getting finished video back to DV camera Hi all, I'm using MM2 on Win XP with SP2 Had no problem capture video with Firewire from my Canon ZR45 MC. Was able to edit, add music, etc. Was able to make an AVI and/or wmv. BUT, when I try to do File, Save Movie File and pick DV camera it doesn't work right. It records it back to the camera but the results are weird as follows: - 3 minute video ends up being 10 minutes on the DV tape - Video constantly cuts in and out (1 sec on 2 off or thereabouts) - The sounds doesn't really come through except in bits and pieces - Not sure if it is significant, but when I play back the original recorded video the screen says "12 bit", but when I try to play back the junk I get from uploading from MM2 it says "16 bit". I don't think it is my hardware. I have an Athlon XP 2200+ (1600 mhz) system with 768 MB ram. And again I had no problem capturing from the camera in the first place. Any thoughts or troubleshooting advice? Thanks, Peter Tag: Can't capture resolution higher than 352x288 Tag: 32030
  - 14
    - slide duration I have put a slideshow together, but I need to change the duration of each picture. Is there a way to do that with out having to start over? I already have the pictures in the order I want them and don't want to have to start over! Thanks! Tag: Can't capture resolution higher than 352x288 Tag: 32028
  - 15
    - Editing-contrast Is there a method when editing in MM2, where you can add contrast? Also, I am evaluating MM2 and Adobe Premiere Elements. Which is better and why? Thanks for your comments. Tag: Can't capture resolution higher than 352x288 Tag: 32020
  - 16
    - Distorted movie Connected Panasonic NV-GS70 Camcorder through Firewire Card & Cable. My XP Home SP2 Device manager shows firewire card and installed properly. To get imaging device recognised it wasn't easy, but i got it and device manager recognised it as Panasinic AV Device and installed corrrectly. I get Distorted movie preview in all formats. By defaults it goes to NTSC and not as PAL. No Automatic Capture window is seen in movie maker wizard. Is this a problem beacuse i have builtin dispaly of 32MB shared memory? I tried same card & cable and camera on another PC with XP Professional SP2 and works fine this too have builtin display. I dont know what to do. Please help. regards Tag: Can't capture resolution higher than 352x288 Tag: 32017
  - 17
    - unable to save in avi format Although I have successfully created DVDs before, I am having this problem with a movie I am creating now. I am able to save this movie in WMV format but when I go to save it as AVI, I get the following error. I know that have plenty of disk space. Movie maker cannot save the movie to the specified location. Verify that the original source files used in your movie are still available, that the saving location is still available, and there is enough disk space, available and then try again. Tag: Can't capture resolution higher than 352x288 Tag: 32013
  - 18
    - Skipping Audio & Video I captured some video from my camcorder and created a movie with video clips only (no photos). In attempting to create a movie that can be burned to a DVD (DV-AVI), the video and audio skip. Any ideas? -- Cathy Tag: Can't capture resolution higher than 352x288 Tag: 32011
  - 19
    - How do you convert DVR-MS? I have been looking all over, since ms doesn't support the new format. I have tried using the programs off of TGB and they do not work at all. Probably to show off. I just want to convert dvr-ms to mpeg files. There HAS to be a way (free preferably). Tag: Can't capture resolution higher than 352x288 Tag: 32008
  - 20
    - WMM 2.1 saved file for the web is not found. When creating a file for the web and then selecting DSL the program converts and saves, and indicates it has been saved successfully. on looking for the saved file it doesn't exist. It should hve bee saved as a WMV to use on the web. anyone know why it was not saved? Wat can I do to make it save or how can I findout why it didn't save. I've tried many times to get it to save, which it will say it did but no file is found. -- Gene Tag: Can't capture resolution higher than 352x288 Tag: 32007
  - 21
    - Transition Maker 2 Patrick has spend many months developing a newer, better version 2 of Transition Maker 2 (not that there was anything found wrong with version 1)... it's now available for download... a free upgrade for those who have version 1.... and a 7 day free trial version for those who haven't tried it. Use the link on the main page of my website to get to the TM2 download page. The default installation will be to a different folder than version 1, and you can run both versions on your computer. Your TM2 project files are fully compatible with both versions. I'll be putting out more info about it over the weekend and updating the website online tutorial. -- PapaJohn Movie Maker 2 and Photo Story 3 - www.papajohn.org Photo Story 2 - www.photostory.papajohn.org . Tag: Can't capture resolution higher than 352x288 Tag: 32006
  - 22
    - Audio file length When I add and MP3 file to the audio track of my edited video even though the mp3 is 3min20secs long it shows in the timeline as over 7mins long. The wave form on the time line ends at 3min 20secs so I can cut it back but it is pretty annoying. Does anyone know what causes this and if it can be corrected. Tag: Can't capture resolution higher than 352x288 Tag: 31995
  - 23
    - weird codec issue I have an AVI encoded in XVID that I want to convert to .wmv using moviemaker. I can view this file in WMP so clearly I have the play codec. When I try and import that video into MM2.1 it says I don't have the codec. Confused... ~d d Tag: Can't capture resolution higher than 352x288 Tag: 31992
  - 24
    - Editing Video and Audio Is there anyway to add a second video line in the timeline when editting - so you can transition your video from the main piece with audio - to just some video of other things over the audio from the main clip - in other words - is there a way to separate the audio and the video. Also - I tried to get a piece of video to speed up - but it doesn't show that way when I play it in the timeline - how come? Thanks! Ted Tag: Can't capture resolution higher than 352x288 Tag: 31989
  - 25
    - removing and replacing scenes ,, keeping original sound track Good Day Need some urgent help please. I am busy editing a video (shot on 2 different dv cameras). I have started with the main camera (45 minutes) , and I have also put the second camera's footage on the time-line. I have dragged the video on to the music line ,, in order to be able to cut out scenes from first camera and replace with scenes from another camera ,, thereby keeping the original sound. I am having major problems in trying to replace exactly the same amount . For example I have removed a scene of 3:14 (3 seconds, 14) . On the other footage the closest I can get is 3:12. I have tried for hours. No matter what it is always .2 of a second out . In order to have the sound synchronized ,, I have to take out and replace exactly the same amount of video .. On the one the scene starts at 5:33.12 and end at 5:36:26 yet on the other it ends on 5:36:24 etc etc Awaiting your expert comments please ... Harold Johannesburg South Africa Tag: Can't capture resolution higher than 352x288 Tag: 31988
- Next
  - 1
    - My camera (Sony DSC-M1) creates "movies" using MPEG4 - I'd like to I'd like to use them in movie maker to create movies - is this possible? The posts I searched all seemed like it wouldn't work. Tag: Can't capture resolution higher than 352x288 Tag: 31987
  - 2
    - Video capture in DV AVI I have captured a short movie and when I played it back on the timeline the clips were slightly distorted when played. I rendered the movie to my computer and everything appeared fine. Is this normal ? Tag: Can't capture resolution higher than 352x288 Tag: 31986
  - 3
    - WMM2.1 When creating a file for the web and then selecting DSL the program converts and saves, and indicates it is saved succesfully. But I cannot find the saved file. I've repeated this several time but each time I cannot find the saved file. It should have been saved as a WMV to use on the web. I do not select the Microsoft suggested sites. Why is it not being saved even though it said it's been saved. Please help -- Gene Tag: Can't capture resolution higher than 352x288 Tag: 31985
  - 4
    - Audio from one clip with video from another! Is there any way to combine the audio from one video clip with the video from another? I want to overlay the audio from one clip with a title clip. BUT, the key is I don't want it in the "Audio/Music" line because I want to keep the music going. Know what I mean? Everytime I try it, the audio jumps to the "Audio/Music" line and interrupts the music. Any help would be appreciated. Thanks! Rachel Tag: Can't capture resolution higher than 352x288 Tag: 31984
  - 5
    - AUDIO / VIDEO SEPARATION I am in the process of turning camcorder video into a movie. I would like to SEPARATE the audio and video. Is there a way to do so? Tag: Can't capture resolution higher than 352x288 Tag: 31983
  - 6
    - Embedding clips How do you deliberately embed one clip inside the other? I've actually done this accidentally when fiddling with some of my clips and their effects, but I can't figure out how to do it on purpose.lol Thanks. Rachel Tag: Can't capture resolution higher than 352x288 Tag: 31978
  - 7
    - Why can't I import my MPEg4 file? I keep on getting the following error message! C:\Documents and Settings\Gary\My Documents\My Videos\Melville Castle.mpg could not be imported. An interface has too many methods to fire events from Tag: Can't capture resolution higher than 352x288 Tag: 31975
  - 8
    - HP dc5000 not recognized as Video Capture Device I have a VCR connected to my hp dvd movie writer dc5000 connected to my WinXP SP2 PC. VCR connected via s-video and audio (red & white). I can capture video & audio through the dc5000 with the ArcSoft ShowBiz software that came with the dc5000. I can capture video (no audio yet) through the dc5000 with Roxio Easy Media Creator 7. However, the dc5000 is not recognized as a Video Capture Device in Windows Movie Maker 2.1. >> How can I make sure Movie Maker recognizes the dc5000 device? << Tag: Can't capture resolution higher than 352x288 Tag: 31974
  - 9
    - Tip: Scan an Old Book Here's a new sample story - using an old book, a scanner.... and PS3.... and the neptune service. http://papajohn.neptune.com?selectedalbum=papajohn118478 -- PapaJohn Movie Maker 2 and Photo Story 3 - www.papajohn.org Photo Story 2 - www.photostory.papajohn.org PS... the heat and light of a scanning process can harm old paper... take appropriate care. . Tag: Can't capture resolution higher than 352x288 Tag: 31973
  - 10
    - Tip: New DVD Plug-in for Photo Story 3 Sonic Solutions released a DVD Plug-in for Photo Story 3. http://estore.sonic.com/enu/photostory/default.asp?lang=enu&rd=22782&MailID=msphoto2160501&MID= ... available in all photo story languages. The cost for the download: $19.99 The DVD Burn options become available from the save area of the Photo Story menu. -- PapaJohn Movie Maker 2 and Photo Story 3 - www.papajohn.org Photo Story 2 - www.photostory.papajohn.org . Tag: Can't capture resolution higher than 352x288 Tag: 31972
  - 11
    - no video capture ok,kids,I've seen this one before.I have a vaio pcvrs720g, brand new,jvc grd33us vid cam.Using wmm,u-lead ,dvgate,nero6,or roxio I get the same thing.Computer recognizes cam,any software will operate cam functions,up to and including capture.But,will not capture video.Different error messages with different softwares,but all basically say:no video capture,check source and computer configuration.Have connected with firewire and i-link cables and ports,same result.Have my old dell computer,it works fine.(just too slow).Camera even starts,shows vid on cam view screen,but nothing in preview window on computer,no counter action,and no capture.Anyone got a clue.By the way,talked to Sony,said it's under warranty,ship it to repair station.Biiig help! Thanks. -- ludingtont Tag: Can't capture resolution higher than 352x288 Tag: 31971
  - 12
    - "insufficient memory" error when saving While editing various video clips I ran into this "insufficient memory" error when trying to save my project. I don't know why I'm getting this message, and if it refers to my RAM or hard drive space. I have a gig of RAM and well over 25 gigs of storage on my hard drive, so I don't understand how it's insufficient. With movie maker open, the computer is only using about 550mb of RAM. Any ideas as to what it might mean, and how to fix it? Tag: Can't capture resolution higher than 352x288 Tag: 31964
  - 13
    - how to copy clip from dvd I have copyright permission to copy clips from an existing DVD into a movie maker presentation for a history project. But I can't figure out how to import the clip from the D drive to my project. This is my first time using movie maker. Tag: Can't capture resolution higher than 352x288 Tag: 31962
  - 14
    - Inverting video The easiest place to mount my camcorder in my race car (which is what I bought it for) means that it would be upside down... So ... do I get a separate bullet cam (and I bought a camera with an analogue input specifically for this), or is there a way of inverting the footage? -- "The road to Paradise is through Intercourse." [email me at huge [at] huge [dot] org [dot] uk] Tag: Can't capture resolution higher than 352x288 Tag: 31961
  - 15
    - Error during Import video or picture. How to solve problem on importing video or picture in movie maker. The error message is ".mpeg could not be imported. Unspecified error". Pls help. Thank you Tag: Can't capture resolution higher than 352x288 Tag: 31959
  - 16
    - Black video screen in Movie Maker 2.1.4026.0 / Windows XP Pro SP2 I was using Movie Maker to create videos and it is now displaying just black in the video window and maxing out CPU. Any ideas? Tag: Can't capture resolution higher than 352x288 Tag: 31957
  - 17
    - converting wmm files to powerpoint I can't play an edited windows movie maker in windows media player or get it into my powerpoint presentation. Someone please let me know how to do this. thanx Tag: Can't capture resolution higher than 352x288 Tag: 31947
  - 18
    - Capture to clips Hi I run the wizard to capture manually from a camara. I start and stop recording several times before hitting the finish button. The result is only one clip. Any idea of why. MM must have all the info it needs to create the clips ( yes the create clips check is active ). This happens since ver. 2.1 was installed. Thanx Tag: Can't capture resolution higher than 352x288 Tag: 31946
  - 19
    - AAC format compatability with MM Will I ever be able to use songs in AAC format? Movie Maker only excepts MP3? Is that correct or will I have to re-rip my collection of 4000 songs? Help? Tag: Can't capture resolution higher than 352x288 Tag: 31940
  - 20
    - Will Movie Maker ever allow me to move my songs in AAC over for us I can't use my songs ripped in iTunes (AAC format) to movie maker. I like movie maker, but my entire collection is AAC. Will there ever be compatability? Tag: Can't capture resolution higher than 352x288 Tag: 31939
  - 21
    - Stripping audio from imported video How do I remove the audio from imported video so I can replace it with my own soundtrack? At the moment, I'm getting both the music and the wind noise from the camera, which isn't quite what I intended. -- "The road to Paradise is through Intercourse." [email me at huge [at] huge [dot] org [dot] uk] Tag: Can't capture resolution higher than 352x288 Tag: 31938
  - 22
    - Title positioning Does anybody know a possibility to position the titles (on the lower part or in corners of the screen)? Tag: Can't capture resolution higher than 352x288 Tag: 31937
  - 23
    - chopping a bit off the end of a video If I recorded a .wmv using MM2.1 and then imported that file back into MM2.1 and split off the last minute of the video and saved the result using exactly the same video profile. Am I right in assuming that there would be no loss of quality whatsoever because the program would be intelligent enough to spot that it's simply doing a trim operation and doesn't need to re-encode (and degrade the quality further) ? I'm tempted to think this isn't the case because doing this operation can take 20 minutes on a 30 minute video recorded (and being re-saved) at 500kbps. If it was being intelligent it would simply figure out where to truncate the file. ~dd Tag: Can't capture resolution higher than 352x288 Tag: 31928
  - 24
    - wmv versions produced? Hi, I've been recording shows using MovieMaker for a couple of years. The last few months using version 2.1 of MM and previously version 2.0. Before that I used Windows Media Encoder 7 and then 8. I'm now looking at getting a portable media center and need to know the exact version of the files I've made. I don't know if they're wmv7, 8, 9 or 10. Am I right in assuming the following: WME7 makes wmv7 WME8 makes wmv8 MM2.0 makes wmv9 MM2.1 makes wmv10 That info will help me in my buying choice... thanks... ~dd Tag: Can't capture resolution higher than 352x288 Tag: 31927
  - 25
    - YIKES..sorry for the double post ! Sorry.. MSN said the first message did not go so I did it again.. thanks.. jan Tag: Can't capture resolution higher than 352x288 Tag: 31926

I use the Leadtek WinFast TV2000 XP capture device to capture analogue
(composite) video from my camcorder.

After I press the "next" button on the video setting window the following
error message appear:

"The video device is currently in use.
Close any other application that is using.................."

I can't find any other active device.

Pse help!!

Kobus

Top