Audio

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Video Effects Cause moviemaker to Crash Clips load and save with no problem. There is no ability to use any video effects rendering the program worthless. Each time I apply video effects such is increasing brightness or any other video effect the program immediately shuts down. Anyone having a solution please help. Also, I've noticed clips over 200mb are often truncated indicating the limits of moviemakers abilities to perform. Tag: Audio Tag: 4201
  - 2
    - Video distorted previewing captured video Help please! Can't figure this one out. My computer is a Gateway 500SE 1.8 Ghz processor 512MB RAM. When I capture video with MM2 from my VCR through my capture card(AverEZ- DVD Maker) It captures the video and audio just fine but, when it's actually capturing the video the actual video in the preview window is distorted so I can't see what I'm capturing. But I can hear the audio just fine.I've checked all the settings and made sure there not in PAL mode. I would really like to see my video in the preview window when capturing. Any suggestions would be greatly appreciated. Thank-you! Tag: Audio Tag: 4199
  - 3
    - Manual capture problem Hello, I am able to cpture the entire tape in the cam, but the option to capture only a part of it doesn't work. I can contrle the cam and when clicking on "start capture" it starts the tape in the cam, but nothing is captured. When clicking "stop capture" an error messages says I should check the connections because nothing has been captured. Connections should be fine, as I could capture under the different settings before. any thoughts? Cheers Dan Tag: Audio Tag: 4196
  - 4
    - Moviemaker XP save movie issue I have 1h:47m movie worth of video clips that I put into a project. When I save the movie to my computer it only saves the first 28 minutes. I am saving in wmf 689kbps- I need 555mb of space ad I have over 15gig. Tag: Audio Tag: 4190
  - 5
    - Recording MM2 video back to Sony TRV-DCR340 When I try to export a movie back to tape, I put my camera VCR mode, the tape begins to run with a blue srceen and a little red dot at the top, but there is no > video streaming to the tape. The camcorder screen stays > blue for a least an hour (for a 2min video). When time > line is completed I click finish but I have no video. > When I rewind and view it, I have blue screen and every > once in a while a partial picture. No sound no video. > I have the latest FP for XP and latest MM2. > I would appreciate ANY help in getting my video to tape. > Thanks, > Tom Tag: Audio Tag: 4185
  - 6
    - Papa John.... Fire wire drivers any suggestions on where i can get the lates fire wire drivers? Eric, It seems like you are narrowing it down to a firewire card or driver issue (download/install the latest driver for starters), or a firewire cable issue (borrow and try a different one for starters) PapaJohn "Eric" <ef_7@hotmail.com> wrote in message news:01b001c36746$cc8e8610$a401280a@phx.gbl... > ok i tried that but every time i try to "send file to > camera" it says "DV10 MFC Application has encountered a > problem and needs to close. We are sorry for the > inconvenience." > Any help? > Also... JVC called back and said the problem might be > with the fire wire.... they said: "maybe incorrect > settings with the fire wire... time code - set dropframe > 29.97 sps" but i've been looking and so far i've found no > way of accessing my fire wire (Acoustic Research, IEEE > 1394, 4 pin to 6 pin) settings. Any help? Please! > > >-----Original Message----- > >Yes > > > >"Eric" <ef_7@hotmail.com> wrote in message > >news:056001c366ae$ce7dcf00$a601280a@phx.gbl... > >> Ok so I save the movie file to "My Computer" > >> and then use DVIO to send it to my camcorder. Is this > >> correct? > >> >-----Original Message----- > >> >The export to camera process is the most demanding on > >> your computer. Defrag > >> >your hard drive and turn off other apps as you do it. > >> > > >> >Or, maybe save it to a DV-AVI file on your hard drive > >> first, check to be > >> >sure the file isn't fragmented, and use the DVIO > utility > >> (Camcorders... > >> >General page of www.papajohn.org) to transfer it to > >> your camcorder. > >> > > >> >PapaJohn > >> > > >> > > >> >"Eric" <ef_7@hotmail.com> wrote in message > >> >news:048201c3669f$1b6b83d0$a401280a@phx.gbl... > >> >> Ok!!! Big Problem!!!! My friends and i recently got > >> >> together for a reunion, i recorded the events with > my > >> JVC > >> >> Digital camcorder, with MiniDV, model no. GR- > DVL320U. I > >> >> promised everyone that I'd edit the footage with my > >> >> computer, VAIO Windows XP Home, PCV-RX755. I > transfered > >> >> the files to my computer, with Movie Maker 2 Video > >> >> Capture Wizard, using AR Acoustic Research > proseries II > >> >> IEEE 1394 4 pin to 6 pin cable. I edited it using > Movie > >> >> Maker 2, but when i transfered the finished product > >> back > >> >> to my camcorder, the audio had breaks in some parts > >> >> making the quality really bad. We've experienced > this > >> >> problem before and were told to send it to get > cleaned, > >> >> but the problem was only temporarily fixed. We tried > >> >> contacting JVC, but they've been not very much help. > >> >> Someone please help! Tag: Audio Tag: 4184
  - 7
    - PapaJohn - I can't save :( Whenever i save a movie the progress bar always stays at 0% and the minutes are always climbing... it literally never stops increasing! HELP! Plaese :). Thanks... Tag: Audio Tag: 4181
  - 8
    - Re: Catastrophic Failure Animated Gifs arn't supported as video files, but are however accepted as picture files. Which means they can be accepted through the 'Import Pictures' function. As I have said in my previous statement, my other .gif files were accepted. When you equip them to the videostream/storyboard and hit play, they play out the animation of the animated gif. *Helpful Hint for those who want to make their own original Intro/Credits* The actual problem was that it wont accept the one certain larger .gif file. THE OTHERS WORK FINE. My question is; Is there a problem with the image importing portion, seeing all of the 'loss of quality' posts and if so, would that particular portion of the program have a limit to the size of files it accepts. >-----Original Message----- >Matthew, > >Animated gifs are not one of the video file types supported by MM2 > >PapaJohn > >"Matthew" <mega_matt@hotmail.com> wrote in message >news:021a01c3681d$cc583920$a601280a@phx.gbl... >> For some reason, whenever I try to import one of my .gif >> files into movie maker, it gives and error message >> saying "the file could not be imported. Catastrophic >> Failure." It only does it with the one file because it >> still accepts my other .gif files. I've tried resaving >> the animation, but it still gives the same error message. >> The only thing I can figure is that the file is too >> large, even though its only 3,876KB. But I have no Idea >> why that would be a problem seeing I have been able to >> import Video footage that was 5,215KB and audio files >> that went uo to 25.6MB. Please help me. Tag: Audio Tag: 4174
  - 9
    - Audio/Music tracks Hi - Movie Maker is great, but it's audio controls appear to be lacking. I want to have background music in my video, but I cannot see how to control things like fade in or out or volume with any kind of precision. There are no controls on the audio/music track in the storyboard that let's me visually see where volume changes or fade in and out occurs, so I cannot precisely synchronize with the video and audio track. Any tips about how better to control the audio settings? Are there any add-ons I can buy that will help with this? - Dylan Tag: Audio Tag: 4171
  - 10
    - Catastrphic Failure For some reason, whenever I try to import one of my .gif files into movie maker, it gives and error message saying "the file could not be imported. Catastrophic Failure." It only does it with the one file because it still accepts my other .gif files. I've tried resaving the animation, but it still gives the same error message. The only thing I can figure is that the file is too large, even though its only 3,876KB. But I have no Idea why that would be a problem seeing I have been able to import Video footage that was 5,215KB and audio files that went uo to 25.6MB. Please help me. Tag: Audio Tag: 4169
  - 11
    - MMI_XP- Clips from VHS obscured by white bar??? Some VHS video feeds to MM1 are obscured by a horizontal white bar filling the middle 1/3 of clip image. In one case this occurred with every second clip ; in another every third clip and in another all clips were clear. All clips 'run' ok with sound but the white bars obscure the clips for short while. Has anyoone any idea what may cause this intermittent problem? TIA Tag: Audio Tag: 4166
  - 12
    - Need PapaJohn on hang problem In MM2 I select capture and then after the window comes up I try to cancel the program hangs. If I go to the alt+ctrl+del and try to end mm2 I get the send err message and it goes back to alt+ctrl+del window, I must force a hard boot to get out of it....Jerry Tag: Audio Tag: 4164
  - 13
    - using cancel hangs computer In MM2 I select capture and then after the window comes up I try to cancel the program hangs. If I go to the alt+ctrl+del and try to end mm2 I get the send err message and it goes back to alt+ctrl+del window, I must force a hard boot to get out of it....Jerry Tag: Audio Tag: 4163
  - 14
    - Capturing Profiles Not Found Hello There, For posterity, I think its important that this fix be listed here. For some unknown reason, Windows Movie Maker started complaining that "Capturing Profiles Not Found". The capture had previously been working flawlessly for some 6-8 months. After finding no reference to this issue on the web, a little toying found that installation of Windows Media Player 9 codecs solved this issue. PHEEWW! Lotsa luck! Regards, Josh Tag: Audio Tag: 4162
  - 15
    - Audio After Project is made into a Movie I'm experiencing audio problems on all of my movies. After working on a project, and then converting it into a movie (DV-AVI) file, the audio clips in and out. I've tried increasing and decreasing the size of the music file, it seems that the audio is suffering during screen fades and transitions. I'm running a 2.2Gig processor, 512DDR Ram, off a 18.2GB SCSI drive. During the project to movie phase, the processor is running at 95%to 100%. Any suggestions Tag: Audio Tag: 4157
  - 16
    - Macros for Movie Maker? Is anyone aware of macros capable of segmenting clips into adjustable durations? I'm using Movie Maker to prepare footage for behavioral analysis and need to insert blank screens at regulat intervals. Since I anticipate over 300 hours of tape, I'd like to automate the process as much as possible. Help/suggestions offered is/are appreciated. Tag: Audio Tag: 4151
  - 17
    - Editing VCR and Digital videos to write on DVD disc I want to edit a video from both a digital camcorder and a VCR tape. I have them copied to my hard drive. I am using both Dazzle Video Creator 80 and Sony software to capture my videos. They are both MPEG files. I have an external DVD writer dvd 300e model. This product and all of the above are new items. The HP Arcsoft ShowBiz is what I use to edit the files. PROBLEM: When I move video icons into the program it give me a message "This file format is not supported" The files are opened with RealPlayer or Windows Media Audio/Video" Neither will open. .. I have been on telephone with HP and they have gone thru all the trouble shooting they know. My computer is Dell and I have spoke with them. My computer is okay. PLEASE HELP! THANK YOU, Mary Tag: Audio Tag: 4150
  - 18
    - DV-AVI format Having a bit of difficulty with this format... When saving to DV-AVI format, MM2 saves the file at 352 x 288, even though the source file is 640 x 480. This is bad enough for video footage, but even worse for any titles/graphics I have added as they look appalling at this resolution. The only way I can save a movie at a high res (640 or over) is in WMV format, which is fine until I convert to MPEG2 for SVCD creation. Any ideas? Craig Tag: Audio Tag: 4145
  - 19
    - Audio problems when recording back to tape Help!!!! I have a problem with the audio track (background music) I added to my movie. First I muted the audio from the video so only the background music I added is heard. The video is edited with various clips from a longer video. When I try to put my project back to tape (from computer onto DV Tape), the audio I added jumps (interrupts) for a second. I think the original video audio is causing the problem and have muted it and done everything else but the music track still jumps when the video changes to a different scene. I even recorded the entire video back to computer so there would be not breaks in it and used it in a new project with the audio track and it still jumps. I can't figure this one out, someone please help Tag: Audio Tag: 4144
  - 20
    - microphone problems I was trying to test my microphone, but my system wasn't "hearing" me. I added voip; the program's wizard couldn't hear me either. I called my home phone, and I could hear me through my headphones, but I couldn't hear myself on the telephone.I ran the test wizard in Windows, but no sound registered. I can hear myself talking into my mic when I'm wearing my headset, so I think the hardware is OK. It seems like a software problem. I tried to create a wave sound from desktop, but no go there either. Any suggestions will be greatly appreciated. thanks! Tag: Audio Tag: 4143
  - 21
    - WMM2 crashes system Hello fellow hair pullers! Every time I load WMM2 and activate any function, my systme crashes, and I end up having to reset my computer. I can't even have task manager end the task. Nothing helps. Anybody have this problem? thanks! Tag: Audio Tag: 4142
  - 22
    - Emailing question I have a 1 minute movie that I would like to email. My question is, do I have to use the email function from Movie Maker? Can I send it it out as a MPeg using TEMPeg. That way anyone can watch it with whatever software they have ie qucktime, real player etc. What would be a good way to save it so it is small enough to email? I saved it to 'my computer', then used tempeg to create Mpeg file. It still appears to be large. Can someone enlighten me on the steps that would be best to email? Thanks Jim Tag: Audio Tag: 4132
  - 23
    - repeating error message Every time I open Windows Movie Maker on Windows XP, after I load my movie into movie maker it closes down and gives me an error message asking me if I want to send it to microsoft so they can help fix it. It happens every time. Tag: Audio Tag: 4126
  - 24
    - Saving to Sony DCR-TRV340 When I try to export a movie back to tape, my camera goes to record mode, the tape is running, but there is no video streaming to the tape. The camcorder screen stays blue for a least an hour (for a 2min video). When time line is completed I click finish but I have no video. When I rewind and view it, I have blue screen and every once in a while a partial picture. No sound no video. I have the latest FP for XP and latest MM2. I would appreciate ANY help in getting my video to tape. Thanks, Tom Tag: Audio Tag: 4123
  - 25
    - MOVIE MAKER 2 I downloded WMM2 from the download site, how do I know if its WMM or WMM2 on my computer. When I click help and properties what should it say? thanks Tag: Audio Tag: 4122
- Next
  - 1
    - Fade to black? PapaJohn said: Put a black still picture in the timeline and you can overlap it with the clip as long as you like. ---------------- Sounds like a plan. But where or how does one acquire a 'black still picture' and how does one 'overlap' a clip? I've been under the impression that dragging the left/right handles will not lengthen/shorten the timing of the clip. Tag: Audio Tag: 4121
  - 2
    - I can't send movies in E mails I installed a Samsung Digimax V4 camera and can send photos no problems in media. To start with everything worked fine, and I was able to send small video clips by e mail with movie maker. I now appear to be stuck on one particular movie, shot in may. Now, although I can load clips I've taken onto my own PC , any movies at all that I try to send, (even to myself) come out as this one particular movie dated back in May. I cant get rid of it. Even though the file properties show the new clips, when I send them , they still turn out to be this same one. The only possible explanation I can come up with is that in mid may, I got Movie maker updated to movie maker 2, I cant remember where from. I've a feeling the trouble stems from then. Is there a patch I need, or should I do a system restore back to may, as I dont know how else to remove Movie maker2. I'd prefer to uninstall MM2 rather than do a system restore. please advise me. Tag: Audio Tag: 4118
  - 3
    - editing- video and audio not in sync Hi! I posted yesterday because I couldn`t pause while editing without crashing. Now I have since downloaded Direct X 9b, It seemed to better the situation although I still can`t slide the slider to a later part of the clip and have the video and audio in sync. If i move the slider I get the audio of the new location but not it`s image or just one still image. please help thank you luc Tag: Audio Tag: 4117
  - 4
    - To: Papa John (Re: Please Help... Soon!) ok i tried that but every time i try to "send file to camera" it says "DV10 MFC Application has encountered a problem and needs to close. We are sorry for the inconvenience." Any help? Also... JVC called back and said the problem might be with the fire wire.... they said: "maybe incorrect settings with the fire wire... time code - set dropframe 29.97 sps" but i've been looking and so far i've found no way of accessing my fire wire (Acoustic Research, IEEE 1394, 4 pin to 6 pin) settings. Any help? Please! >-----Original Message----- >Yes > >"Eric" <ef_7@hotmail.com> wrote in message >news:056001c366ae$ce7dcf00$a601280a@phx.gbl... >> Ok so I save the movie file to "My Computer" >> and then use DVIO to send it to my camcorder. Is this >> correct? >> >-----Original Message----- >> >The export to camera process is the most demanding on >> your computer. Defrag >> >your hard drive and turn off other apps as you do it. >> > >> >Or, maybe save it to a DV-AVI file on your hard drive >> first, check to be >> >sure the file isn't fragmented, and use the DVIO utility >> (Camcorders... >> >General page of www.papajohn.org) to transfer it to >> your camcorder. >> > >> >PapaJohn >> > >> > >> >"Eric" <ef_7@hotmail.com> wrote in message >> >news:048201c3669f$1b6b83d0$a401280a@phx.gbl... >> >> Ok!!! Big Problem!!!! My friends and i recently got >> >> together for a reunion, i recorded the events with my >> JVC >> >> Digital camcorder, with MiniDV, model no. GR- DVL320U. I >> >> promised everyone that I'd edit the footage with my >> >> computer, VAIO Windows XP Home, PCV-RX755. I transfered >> >> the files to my computer, with Movie Maker 2 Video >> >> Capture Wizard, using AR Acoustic Research proseries II >> >> IEEE 1394 4 pin to 6 pin cable. I edited it using Movie >> >> Maker 2, but when i transfered the finished product >> back >> >> to my camcorder, the audio had breaks in some parts >> >> making the quality really bad. We've experienced this >> >> problem before and were told to send it to get cleaned, >> >> but the problem was only temporarily fixed. We tried >> >> contacting JVC, but they've been not very much help. >> >> Someone please help! >> > >> > >> >. >> > > > >. > Tag: Audio Tag: 4115
  - 5
    - Terrible video output & green screens on clip library Hello, First, thanks to Papa John's fixes page, I was able to keep WMM2 from crashing constantly when trying to use an effect or transition. Thanks! Secondly, I have a huge problem. My video output is terrible. The only way I can describe it is to say it looks like a 3 year old went wild with fingerpaints. :> I have uninstalled codecs (Nimo Codec Pack), I have recompressed any clips I'm using into mpegs, I've defragged, upgraded to DirectX 9.0b, Windows Media 9, and still I cannot make WMM2 stop rendering my finished movies into... crap. Most of the time I can't even make out the difference between the scenery and the people in the clip (but the audio is just fine, which indicated to me that it was a video codec... which is why I uninstalled everything). As if that weren't enough, most of the clips in my clip library (which I have set to thumbnails) are green. They were green before I uninstalled the extra codecs, and after. I'm beginning to wonder if WMM2 is just designed to give you poor results if you're not using proprietary media from Microsoft. Tag: Audio Tag: 4114
  - 6
    - unable to install movie maker Hi, I have a problem installing windows movie maker. I used to have this program installed but somehow lost it on my computer. I've tried to install it again from Microsoft.com but failed. The file moviemk.exe is nowhere to be found on my computer. Does anybody have a suggestion on how to solve this problem? Thanks! Sandra Tag: Audio Tag: 4111
  - 7
    - How do I improve Picture Quality Someone please tell me if there is a way to improve picture quality in movie maker. I tried making a movie with pictures I had burned to a cd from a photo developing website. Looking at the photos they are beautiful, but when I import them into movie maker and play the movie on full screen they are of very poor quality. Is there a way to fix this? Tag: Audio Tag: 4110
  - 8
    - Movie Maker Sound Can i control the sound of an imported music file during the middle of a movie? ie: i have imported a video of a person talking and a music file into the timeline. when the person is talking in the middle of the movie clip, i want to fade out or lower the volume of the music file playing so you can hear what the person is saying and then raise the music volume back up after they are done talking. is there anyway to do that? thanks for your help Tag: Audio Tag: 4107
  - 9
    - MM2 projects Hi All-- I have saved multiple projects that I'd like to now combine into a final movie. Should I render each project to a final movie and then stitch them together, or is there a way within the "project" settings to do it a better way? Thanks. Ed Tag: Audio Tag: 4100
  - 10
    - Win XP Movie Maker 2.0 hangs when I'm editing every 1-2 mins....not responding. At first I thought it was this Mm20ex.inf problem and wasn't intstalled but I could not find the file..and I see that under "about movie maker" it's 2.0 SP1 update...so I'm not sure now! Any ideas?? Blueslady, Tag: Audio Tag: 4099
  - 11
    - moviemaker 2 fade in and out I need to be able to control the amount of time it takes for a fade in or out. Do's moviemaker 2 have the ability to control it. I need to be able to fade out very slowly Tag: Audio Tag: 4098
  - 12
    - Once I pause can`t restart in editing mode Hi! i import a video file. I put in the sequential table, start it and then pause it. Then try to restart. Won`t happen. Will crash or take a very long time. I tried to re-download the program from Microsoft. Still having same problem. Please help. Thank you Luc Tag: Audio Tag: 4097
  - 13
    - please help....soon Ok!!! Big Problem!!!! My friends and i recently got together for a reunion, i recorded the events with my JVC Digital camcorder, with MiniDV, model no. GR-DVL320U. I promised everyone that I'd edit the footage with my computer, VAIO Windows XP Home, PCV-RX755. I transfered the files to my computer, with Movie Maker 2 Video Capture Wizard, using AR Acoustic Research proseries II IEEE 1394 4 pin to 6 pin cable. I edited it using Movie Maker 2, but when i transfered the finished product back to my camcorder, the audio had breaks in some parts making the quality really bad. We've experienced this problem before and were told to send it to get cleaned, but the problem was only temporarily fixed. We tried contacting JVC, but they've been not very much help. Someone please help! Tag: Audio Tag: 4089
  - 14
    - Please Help Me, Papa! I desperately need to make copies of my presentation from windows xp movie maker, which can be played on older versions of windows. Please help me. Hunter Laizure Tag: Audio Tag: 4081
  - 15
    - QASF.DLL while trying to capture a movie with movie maker 2 i recieved an error that said mm had to close.When i looked in the event viewer the report it said Faulting module qasf.dll version 9.0. I also noticed i could not manually capture any video.the size of the file would stay at 3Kb but the minutes would pass. I had a look at papajohn.org bit it only said about updating the dll file om 6.0 to 9.0. Any help appreciated. Tag: Audio Tag: 4075
  - 16
    - White bar obscures clips - MM1_XP-VHS Some VHS video feeds to MM1 are obscured by a horizontal white bar filling the middle 1/3 of clip image. In one case this occurred with every second clip ; in another every third clip and in another all clips were clear. All clips 'run' ok with sound but the white bars obscure the clips for short while. Has anyoone any idea what may cause this intermittent problem? TIA Tag: Audio Tag: 4071
  - 17
    - Some VHS d/l clips obscured by horizontal bar in MM1 I have just got started and have d'l three VHS videos into MM1 - All works well EXCEPT - in one case a white horizontal bar obscures the middle 1/3 of every second clip and in the other case obscures every third clip.In the third case there is no bar at all and it works perfectly. When the "barred" clips are run they respond correctly with sound and motion and the white bar seems to disapear automatically after a moment of clip running. I have to experiment further; however has anyone experienced this phenomina??? TIA russ Tag: Audio Tag: 4070
  - 18
    - 1394 video capture with Sony MICROMV IP-55 I have just upgraded my Digital Video Camera from a Sony Handycam to a Sony MICROMV IP55. Neither movie-maker or the Sony supplied Pixel software recognises the 1394 connection. It is fine on both SW packages for the Handycam. When I look on the hardware profile the Handycam is recognised as an imaging device but the MICROMV is listed as a multifunction device in the Sound, Video games listing. Trouble shooting just asks question on audio Anyone know what could be wrong I have tried to re-install and on 2 computers but with same result Both are running Windows XP Richard Tag: Audio Tag: 4067
  - 19
    - mm2 stop responding When using mm2 it stops responding. Doesn't do it all the time and if I let it sit for awhile it will start running again. I talked to other people who have said that they have the same problem. Is there a fix for this problem? Tag: Audio Tag: 4065
  - 20
    - more info on my problem my camera is a sony dcr-pc100 when i try to finish/save movie to dv camera there is NO error message, nothing. the "next" button can be clicked over and over -- the window does not freeze. i have checked my task manager after clicking "next" and all that is going is system idle -- so i know nothing else is operating. i captured the video in dv-avi format. i also captured video in .wmv yet neither work to save back to my camera. though i can save both to my computer, not a problem. thanks, stephanie Tag: Audio Tag: 4063
  - 21
    - exporting movie back to DV camera i can save the movie to my computer -- not a problem, yet when i want to save the movie back to my camera nothing happens. i click on "next" and nothing. nothing freezes, it's as if that function is turned off, or something. this is the same camera that i capture video from without a problem. help? please. thanks, stephanie Tag: Audio Tag: 4061
  - 22
    - Movie Maker 2 When I burnt my movie to CD it played back on my external DVD player witch is connected to my TV, the movie played back OK but the sound was out of sinc about 10 seconds. My DVD is new and it can play back almost any format even WMA and Jpeg files. Can you help? where am I going wrong?. Kind regards Len. Tag: Audio Tag: 4054
  - 23
    - Weird .wav issue Hey there Papa John ... got one for ya: .wav files play fine in the player, from the Collections area, but when I drop 'em into the Audio track, they screech like wailing banshees! What gives? Which stupid .ax file makes that happen. Heeeeellllllpppppp! Tag: Audio Tag: 4053
  - 24
    - Re: Weird Freeze on Exporting to DV Hey, I try to export a movie I created on the moviemaker, and it begins to compile everything, and sets up the camcorder to record back to the DV, but after a few mins, everything just stops. The program doesnt freeze, and i always end up just cancelling the entire exporting process. After that, moviemaker shuts down, and brings up a weird error notice, but I only saw it once, cuz I realized that after the program shut down, I lost about 10 GB's worth of free disk space. I'm sure it disappeared while it was compiling the video...but I don't know where I go to delete this compiled video and get back my disk space. Can anyone help me out here? And what's wrong with my Moviemaker? Tag: Audio Tag: 4042
  - 25
    - moviemaker hangs using belkin usb 2 videobus I am using the belkin usb videobus 2 with a Panasonic PV- A206 video camera. The problem is that when I go to capture using moviemaker 2 it hangs and I have to reboot the computer. I do not get the video in the preview screen. Any help would be much appreciated. Thanks Wes. Tag: Audio Tag: 4041

I am having the same problem with my saved movie files.
The audio cuts in and out when the sceens change. I even
captured the video again with no editing breaks and the
audio still cuts in and out. HELP!!

Top