S.O.S

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - my dvd deluxe 5 will not capture video i am using an analog cam hooked up to my computer running through hauppauge which will let me capture my video in mm2 but when i installed my dvd 5 it will allow me to get the movie from my video file and burn it but it will not let me capture video because it is not recognizing my capture device . tried everything i can think of any suggestions. Tag: S.O.S Tag: 9060
  - 2
    - file too big for dvd i capture my movie and edit it in mm2,saving it as a high quality video then when i am finished i save it to my computer as a dv-avi file and then when i go to my dvd deluxe 5 which i just purchased it cannot burn it to dvd because it is too big. it is a 2 hour movie of the kids when they were little. Should i only do an hour on one dvd or is their a way to do it so the whole thing will fit on help i'm not a computer wiz i'm just a beginner Tag: S.O.S Tag: 9059
  - 3
    - wmm keeps shutting down! hey there i used to edit my movies with wmm2 easily, no problems. but since a few weeks the program keeps shutting down as soon as i start editing - like entering a title for example.just disappears from my screen. checked my harddrive, scanned for viruses, called windows service center etc etc - noone can help. pleeeease any ideas? i dont know what to do anymore and i really need to edit this movie... thanks,frank Tag: S.O.S Tag: 9055
  - 4
    - No Fire in my Wire... Please help! I just got an Agere (FW323-06 Chip Set) 1394 Host Controller Card and I cant get my new WinXP (Emachines C2684) to recognize it at all. After installing it into the PCI slot (I have tried all 3) WinXP is suppose to recognize the Plug and Play card but nothing happened... as if no card/s installed. So... I tried using the "Add hardware" but it dose not recognize any new hardware and asks me if I have already installed it. - I choose "yes" then select "add new hardware device". - Again it finds nothing so... - I continue and select "IEEE 1394 Bus Host Controllers" and I get "(unable to find any drivers for this device)" Any suggestions?? Thanks in Advance, - R Tag: S.O.S Tag: 9053
  - 5
    - Lockup Part 2 Hey, Everyone, thanks for the responses so far. But alas, I'm wearing the "o-fer collar." I have adjusted the page settings and gone through, in desperation, and renamed every .ax file that I found. (I tried each one before I went to the next.) No luck. Any other ideas? Would a uninstall and reinstall help? Uninstall might be fun since it is not listed in my coontrol panel to remove. If all else fails, hate to ask, but any recomendations on other software? Thanks again! Andy Tag: S.O.S Tag: 9041
  - 6
    - MM2 audio buzzing When I create a DV_AVI file using MM2, with wav audio input, the output avi audio is very strange. It seems like someone knocked the peaks off of the base line or maybe smooshed them down. It creates a sort of metal buzzing noise when played back. The source wav file is fine. No other program has a problem. Tag: S.O.S Tag: 9038
  - 7
    - Playing timeline Whenever I try to play the full timeline back in MM2, it plays the sound but doesn't display the clips. However, it will play the sound and pictures for individual clips. The timeline only has a couple of very very short clips, so there shouldn't be a length/size of clip issue. The same computer also still has MM1 on but will successfully playback the timeline in that version. Any clues? Tag: S.O.S Tag: 9033
  - 8
    - virus who can i clen my computer from the virus (blaster) Tag: S.O.S Tag: 9032
  - 9
    - MM2 hangs and shutsdown When i try to change the video transition then it shutsdown without any error message. Is there any way of deinstalling, restarting and installing MM2 again? It has worked fine for some time and now suddely this problem happens. I have seen this error with several laptop's. Tag: S.O.S Tag: 9029
  - 10
    - PappaJohn? I see a reference to PappaJohn's web site. Could someone supply me witht he site addy as I am having problems with MM2. The main problem at the moment is saving a movie. When I click save and give film a name MM then starts to save the file and either gets a small pecentage done and then stops (MM freezes though computer is still workable) or the time indicated goes upwards and continues to do so until I bring up task manager to cancel MM. I have previously saved a larger movie, using virtually the same files. The last time I saved a movie was just prior to installing the latest IE accumlative update (issued just a few days ago) Could this be the reason for inabillity to now save? Ernie Tag: S.O.S Tag: 9028
  - 11
    - winter fun pack install problem. When I try to install the winter fun pack for moviemaker2 I get an (Error 1721) a prog required for install could not be run. Any suggestions to fix this would be appriciated. I'm running XP, and I have the latest drivers for my radeon9800 video card. Tag: S.O.S Tag: 9026
  - 12
    - Show timeline Is it possible to have the timeline (date, time etc) show on the finished product(on a CD) when using Movie Maker 2? It shows at the top when working with Movie Maker but dissapears with the final movie. Tag: S.O.S Tag: 9025
  - 13
    - Movie maker save stops at 6% I've been trying all sorts of fixes here and Papa John's website, but it doesn't seem to work. Any movie I try to save hangs at 6% (always there for some odd reason). Help anyone? Tag: S.O.S Tag: 9024
  - 14
    - MM2 Website - New 'Thumbnail' Feature My website is sometimes... maybe often... difficult in that it has more words than you need, and is often inconclusive about a particular item as I don't have all the answers. I just started to add more words to make things easier. The first new 'Thumbnails' are on these 3 pages: CD Burning... Introduction Problem Solving... Audio Problem Solving... Video I'll be adding more as the world turns. PapaJohn Tag: S.O.S Tag: 9020
  - 15
    - How Can I change the file extension? I need some help! I had saved several video files of my wedding ceremony to a CD while I was reformatting my computer. Before I had went through with the formatting, I ensured that the files could play off of the CD (to which they could). So I formatted my hard drive, to which all the original files were deleted. Now, I have the files on CD (with file extensions as .MSWMM) and they now won't play on my Movie Maker. PLLLEEAAASE someone help me! In reading other posts, I have read that you need to save the file in .ASI or .wmv or other extensions. How can I convert these saved files to reflect a readable extension so that I can see my videos again? Is it even possible? Please someone respond to this! Thanks. Tag: S.O.S Tag: 9019
  - 16
    - Re-associate media files in MM2 If I have a 14GB media file that is part of an existing MM2 project and I wish to relocate the original media file. When I do that, MM2 just gives me a red X--it doesn't prompt me to tell it where the file has been moved to. Is there any way to do this thanks RobertJ Tag: S.O.S Tag: 9017
  - 17
    - Making a CD I have a Sony DRU-510A Combo Drive.I put a Sony CD-R to record Windows movie but it will not recognize the CD-R. Ian using Windows XP. Could you help me. Tag: S.O.S Tag: 9016
  - 18
    - Herewith MONEY $$$$$ For YOU Don't Cheat I found this on a bulletin board and decided to try it: A little while back, I was browsing through news groups and e-mails, just like you are now, and came across an article similar to this that said you can make thousands of dollars within weeks with only an initial investment of $6.00!! So, I thought, "Yeah right, this must be a scam," but like most of us, I was curious, so I KEPT reading. Anyway, it said that you send $1.00 to each of the six names and addresses stated in the article. You then place your own name and address in the bottom of the list at $6.00, and post the article in at least 200 people 0r news groups. (There are thousands) No catch, that was it. So after thinking it over, and talking to a few people first, I thought about trying it. I figured, "What have I got to lose; except six stamps and $6.00 right, right?" Then I invested the measly $6.00. WELL GUESS WHAT!!! Within seven days, I started getting money in the mail!! I was shocked!! I figured it would end soon, but the money just kept coming in. In my first week, I made about $25.00. By the end of the second week I had made a total of more than $1000.00!! In the third week I had more than $10,000.00 and it's still growing!! This is now my fourth week and I have made a total of $42,000.00 and it's still coming rapidly. It's certainly worth $6.00 and six stamps, and I have spent more than that on the lottery without ever winning!!! Let me tell you how this works and most important, why it works.......... also make sure you print this out NOW, so you can get the information off of it, as you will need it. I promise you that if you follow the directions exactly that you will start making more money than you thought possible by doing something so easy!! Suggestion: Read this entire message carefully!! (Print it out or download it) Follow the simple directions and watch the money come in!! It's easy. It's legal. And, your investment is only $6.00 (Plus postage)!!! IMPORTANT: This is not a rip-off, it is decent; it's legal; and it is virtually no risk - it really works!! If all the following instructions are adhered to, you will receive extraordinary dividends. PLEASE NOTE: Please follow the directions EXACTLY, and $50,000 or more can be yours in 20 to 60 days. This program remains successful because of the honesty and integrity of the participants. Please continue its success by carefully adhering to the instructions. You will now become apart of the Mail Order business. You are in the business of developing Mailing Lists. Many large corporations are happy to pay big bucks for quality lists. However, the money made from the mailing lists is secondary to income, which is made from people like you and me asking to be included in that list. Here are the four easy steps to success. STEP ONE: Get six separate pieces of paper and write the following on each piece of paper "PLEASE PUT ME ON YOUR MAILING LIST." Now get 6 U.S. $1.00 bills and place ONE inside of EACH of the six pieces of paper so the bill will not be seen through the envelope (to prevent thievery). Next, place one paper in each of the six envelopes and seal them. You now should have six sealed envelopes, each with a piece of paper stating the above phrase, your name and address, and a $1.00 bill. What you are doing is creating a service. THIS IS ABSOLUTELY LEGAL!!!!! You are requesting a legitimate service and you are paying for it!! Like most of us I was a little skeptical and little worried about the legal aspects of it all. So I checked it out with the U.S. Post Office (1-800-238-5355) and they confirmed that it is indeed legal!! Mail the six envelopes to the following addresses: 1) Andreas Swart Hoornschediep 11 9727 GA Groningen, The Netherlands 2) W. Edens 4829 Bud Ln Lexington, KY 40514 3) Richie Herminio Block F , Eastgate Office Park 24 South Boulevard, Bruma 2198 P.O.Box 10474 , Johannesburg 2000 4) J. Safian 6950 W. Forest Presrv. Dr., #115 Norridge, IL 60706-1324 5) G. Takla 690 Adelaide Avenue East Oshawa, Ontario, L1G 2A8 6) R. Changule 27 Julius Street Flat N0 2 Cosmopolitan View Lynmeyer Johannesburg 2000 South africa STEP TWO: Now take the #1 name off the list that you see above, move the other names up (six becomes 5, 5 becomes 4, and etc.) and add YOUR NAME as number 6 on the list. STEP THREE: Change anything you need to but try to keep this article as close to original as possible. Now post your amended article to at least 200 news groups. : (I think there are close to 24,000 groups) All you need is 200, but remember, the more you post, the more money you make!! This is perfectly legal!! If you have any doubts, refer to Title 18 Sec. 1302 & 1341 of the Postal Lottery laws. Keep a copy of these steps for yourself and whenever you need money, you can use it again, and again. PLEASE REMEMBER that this program remains successful because of the honesty and integrity of the participants and by their carefully adhering to directions. Look at it this way. If you were of integrity, the program will continue and the money that so many others have received will come your way. NOTE: You may want to retain every name and address sent to you, either on a computer or hard copy and keep the notes people send you. This VERIFIES that you are truly providing a service. (Also, it might be a good idea to wrap the $1 bill in dark paper to reduce the risk of mail theft). So, as each post is downloaded and the directions carefully followed, all members will be reimbursed for their participation as a List Developer with one dollar each. Your name will move up the list geometrically so that when your name reaches the #1 position you will be receiving thousands of dollars in CASH!!! What an opportunity for only $6.00 ($1.00 for each of the first six people listed above) Send it now, add your own name to the list and you're in business!!! *****DIRECTIONS FOR HOW TO POST TO NEWS GROUPS!!!***** STEP ONE: You do not need to re-type this entire letter to do your own posting. Simply put your cursor at the beginning of this letter and drag your cursor to the bottom of this document, and select 'copy' from the edit menu. This will copy the entire letter into the computer's memory. STEP TWO: Open a blank 'notepad' file and place your cursor at the top of the blank page. From the 'edit' menu select 'paste'. This will paste a copy of the letter into the notepad so that you will add your name to the list. STEP THREE: Save your new notepad file as a text file. If you want to do your posting in different settings, you'll always have this file to go back to. STEP FOUR: You can use a program like "postXpert" to post to all the newsgroups at once. You can find this program at <http://www.download.com>. If you don't understand how it works you can email me at: mailto:andreass@orange.nl (this is only when my name is in the list, so send a copy of my address as well. put this in the header: make millions very easy + my full name) Use Netscape or Internet Explorer and try searching for various new groups (on- line forums, message boards, chat sites, discussions.) STEP FIVE: Visit message boards and post this article as a new message by highlighting the text of this letter and selecting paste from the edit menu. Fill in the subject, this will be the header that everyone sees as they scroll through the list of postings in a particular group, click the post message button. You're done. Congratulations!!!!!! THAT'S IT!! All you have to do, and It Really works!!! Best Wishes Tag: S.O.S Tag: 9007
  - 19
    - emm386.exe on XP I have a small DOS based program that was written for me by a local programmer. It makes use of a Microsoft file called emm386.exe. I used Windows 98 2nd edition and this worked well. I have now installed Windows XP, and the programme does not want to work. It comes up with a message "No EMS driver is installed". I need to use more memmory to get the small (2mb) programme to operate. What can I do with XP to activate the equavalent to emm386.exe, and which gives a DOS programme access to memeory in the PC above 1MB I would appreciate any help in solving this problem, as it seems that Microsoft SA dont have answers, or are too inexperienced with this. Kind regards Ralph Sorensen Omni Forest Products cc Tel 012-807 2580 Cell: 082 573 0710 Tag: S.O.S Tag: 9005
  - 20
    - Title not working?! I tried to put a title in. ALl I get is a gray screen. Anyone else encountering this problem? Tag: S.O.S Tag: 9004
  - 21
    - Program Hangs... All, I have just started using MM2 on a new computer. After many hangs and software restarts, I came here. I see I'm not alone. I went to Papa John's site for the fixes and started down the list. I'm wanting to edit a 45 minute video, by this Saturday. This is what I have done so far to no avail... 1) Did a search on divxaf.ax. Not found on my computer. Is this not good? 2) Changed Hardware Acceleration to 3, still locked up. I have Directx 9b installed. 3) The computer has a Nvidia Geforce MX 440 w/ 64 MB DDR Memory. I ran Windows Update for new drivers for it, but nothing there. (The computer came with XP Home. I believe it should look for these types of updates. I have not had a new computer in 5 years, so I have a lot of catching up...) 4) Ran GSpot v2.21. It shows that there were a couple Arcsoft files missing, but seems ok for MM2 5) The tweak for Nvidia/Xp... I was unable to find on the listed site. May have been moved or I was just missing it. I think that is about all...Any help would be greatly appreciated! Regards, Andy Tag: S.O.S Tag: 9003
  - 22
    - 16X9 I have a video clip that is in 16x9 format and when I capture it --- it changes to 4x3 I have found how to save my movie in 16x9 format but do not know how to capture my video that way Help? Tag: S.O.S Tag: 9001
  - 23
    - Cannot make a movie I loaded my movie through 1394 into my laptop and then proceeded to edit it. After I edit it and tried to save it to a disc or my hard drive it continued to say "Cannot Complete the Save Movie Wizrd." Movie Make cannot save the movie to the specified location. Then I copied it through Roxio onto a disc and tried the same on my desktoip and it is copying it now. Any ideas out there as to why on my desktop which is older than my laptop. Tag: S.O.S Tag: 8997
  - 24
    - Having trouble saving? (Found Solution) Having re-read thru the excellent Papa John site.. i then went hunting for QASF.DLL I suggest if your getting a SA MOVIE (error) you visit this link as your first port of call.. and download the file relevant to your O I can happily report my MM2 is working like a treat again. Yippee http://support.microsoft.com/default.aspx?scid=kb;en-us;83041 Tag: S.O.S Tag: 8993
  - 25
    - No device indicated I have a Mini DV and a IX CIU computer with windows xp with movie maker . It came with no instructions and I feel i,m missing something. It says there is no device for video hookup. Could really use some help. Tag: S.O.S Tag: 8991
- Next
  - 1
    - REQUIRED: qasf.dll version 9.0 Has anyone got a copy i could have? Tag: S.O.S Tag: 8990
  - 2
    - Upgraded PC, now MM2 will NOT allow SAVING MOVIE Firstly I'd like to take this opportunity to thank Papa John for all his great work and input in this newsgroup and indeed his site. Totally invaluable. My problem, i've been using MM2 effectively since it first launched. My previous PC Spec was P4 1400mhz MMX Gef0rce 4 256 meg ram 2 HDD 180 & 60gig Made loads of films and never had a problem (that I couldn't resolve) Since upgraded to a new Motherboard P4 2600mhz 1 gig DDR Ram ATI Radeon 9800 Pro 256meg MM2 just will not allow me to save as per http://www.eicsoftware.com/pictures/PapaJohn/Website- MM2/MM2.html I'm totally stuffed now. Anyone got any solutions, as i've tried all the ones in the above link. No luck Any one got a work thru, the clock is ticking and I really need to get MM2 working again.. just like the good old days. Tag: S.O.S Tag: 8987
  - 3
    - no device Movie Maker tells me I have no device when I try to run program. Also when I got my computer I did 'nt recive instructions and am tired of going to help to learn more . Any suguestions Tag: S.O.S Tag: 8986
  - 4
    - Sound plays too fast when importing DV When importing my clips with sound (.avi), the sound is not syncronised with the video and is about 100 times too fast. Any help would be greatly appreciated Tag: S.O.S Tag: 8976
  - 5
    - Timing in Moviemaker Hello! I'd like to make a movie with several static images in it. Each static images should be displayed for about 5 seconds? Is this possible with the windows moviemaker? I hope you can help me. Doris Tag: S.O.S Tag: 8973
  - 6
    - the effects for movie maker is not enough the effects for movie maker is not enough.i don't find a lot of effects and trans.for example blaster,raining,lighting etc.please send me if you know how to find them.thank a lot! Tag: S.O.S Tag: 8972
  - 7
    - Final Render Video Stops - Audio Continues I have a project that I cannot seem to make into a movie. I've tried saving to PC, CD, and DV Camera. All indicate a final file size of around 85 meg. Movie is 12:45 (minutes) long I only get errors trying to go to DV camera, but no error reason. Saving to CD or PC, the software proceed normally. When viewing the final movie, video stops, audio continues, at about 50% point. No info in help talks about max file size, etc. Each save gets me a little further. Any suggestions? Tag: S.O.S Tag: 8971
  - 8
    - playing PAL video, Audio sounds like Chipmonks I can't convince my PC to play my home video taken from my Sony Cyber Shot Camera to play back on the StoryBoard like it does in the collections window, or when i play it in windows media play. It sounds like the Chipmonks. I know the videos are in PAL mode, I changed the Options setting to reflect PAL, and i tried NTSC to but i still here Alvin and his buddies. Can someone please help me! My ultimate goal is to convert the videos to NTSC. Thanks Tag: S.O.S Tag: 8966
  - 9
    - compatibility movie maker & media player Why in the name of God can't media player read the video project made with movie maker? I get a message that tells me that media player can't read the kinda file that movie make just made....they are both made by windows. What am i missing??? Tag: S.O.S Tag: 8962
  - 10
    - Blurry photos When I review the video that I made using only photos from my digital camera, my photos are very blurry. It is even worse when I see it in full screen. When you click on the photo to view it on the screen before dragging it down to the timeline it is clear. Is there something that I am doing wrong or do I have a setting incorrect?? Tag: S.O.S Tag: 8961
  - 11
    - Windows I have a Windows Media audio/video file which when I open it in Media Player is 11 mins 3 secs long. But when I import it into WMM, it thinks it's only 16 seconds long. Is there a way to set the properties (or fool WMM) so that I can restore the duration to 11:3, which is right? Tag: S.O.S Tag: 8960
  - 12
    - i can't save project.why? i can't save project.why? and I MAKE IT LIKE HELP FILE Tag: S.O.S Tag: 8959
  - 13
    - No ones been able to help with this not even Intell ... Intell made my motherboard. It was manufacured in Sept of 2003 ... so it's new ... I'm running a P4 at 3.0 ghz and I have 1 GB of 400 DDR ram. I made a 13 minute slide show using WMM2 and although the final product was a WMV ... (I can't find any way to convert WMV to any other format) ... so I forced Roxio CD/DVD creator 6 basic to author this WMV to burn on a DVD-R ... after what was supposed to be a successful burn (took 45 minutes) I discoverd that I could not view any files on the DVD ... by R-clicking on properties ... and after careful observation I discoverd that I cannot view any files on any disks ...THATS ANY DISK not music, not images, not .exe or program disk ... I can't even do a reinsatll of my OS ... because it says my file system is RAW ...insert a disk ... how can one insert a disk when one is already inserted??? At the roxio forum someone suggested that I was full of ... it and that this could never have happened... intell never hear of it ... my DVD burner company say it's not them ... well anyway I've got 1100 bucks invested in my home built computer and after this failed burn cannot use any of my optical drives ... This RAW file format ... from a search at google suggests it's a non-formated hard drive ... YIKES ... when did my CD-roms become hard drives ... anyway I need some help ... if you can ... please I dont understand how this newgroup thinkg works ... I've been here two hours and hope this will post ...I've spent what seem hours looking but ..sure wish you could search posts for help ... if you've got an answere I really need the HELP ... FalconMcRi@cox.net ... oh ... btw ... I've checked out my DVD burner and my CD-rw and they work fine in my previous computer. Tag: S.O.S Tag: 8958
  - 14
    - partial import syndrome i can import most dv-avi files into MM2 with no problem. however, certain files only get 'partially' imported. case in point; i've captured some footage from my dvcam that's 1.2GB, and lasts 6:20. however, once imported that file is inexplicably reduced to only the first 20 secs! there's no way of adjusting the capture size limit - i've checked. and what's more, i've imported bigger files in the past. what gives??? any help greatly appreciated. Tag: S.O.S Tag: 8956
  - 15
    - divide and conquer I am wondering if it is possible to break up a large video project into smaller sections, edit them as needed and then when each is finished, combine them into the final finished project. Once a particular section is finished, it seems wasteful to have to re-render all that again just to see how the new section is coming along. Thanks, Phil Tag: S.O.S Tag: 8953
  - 16
    - export problems I am having trouble exporting my movie in any fashion. When i try to make a WMV file, or save it to a CD, it fails and then gives me a message: "check to make sure my source files are still availible, the destination location is still available and the destination location has enough space" -not in those words but that is what it says. I can open and play and edit my movie no problem-so the source files are still there and uncorrupted, and I even did a test where i made a project the same lenghth (just cutting and pasting)with the same source materials and it worked! I have a ton of room on my computer too. I am at a loss and desperately need help. thank you very much Tag: S.O.S Tag: 8948
  - 17
    - Making video tape of MM output Can anyone pleass advise how I can save my MM movies to a digital or Super VHS tape. I don't have a camera or VCR with 1394 but do have each with S-Video input. Thanks in advance, Al Gonzales Tag: S.O.S Tag: 8945
  - 18
    - Why does Auto Movie not work The Auto Movie feature seems to create another version of the storyboard without the selected background music and tack it onto the end of the existing storyboard. The Help led me to believe it would add background music and produce a finisked film. Tag: S.O.S Tag: 8943
  - 19
    - Conflict between Movie Maker 2 and WinFax It seems whenever I use Movie Maker I have to re download Direct X 9 in order to restore the Answer Calls as Fax option. I also find that Movie Maker needs a new download of Direct X fairly regularly otherwise the movie audio sounds strange. Tag: S.O.S Tag: 8942
  - 20
    - Ticking sound at clip transition I'm using mm2 to edit DV from my PC101. My finished video sounds fine on my computer. When I save the video back to DV tape on my camera I get a single tick noise at each clip transition. Anyone know what's causing the tick? thanks, Jeff Tag: S.O.S Tag: 8936
  - 21
    - "is not a valid date" When I changed the page to type a message ,I got a warning window-lexplorer "is not a valid date".If you don`t clear it you are locked up,don`t have a clue.HELP! Tag: S.O.S Tag: 8933
  - 22
    - Video effects dont work, please help. If i add "icrease brightness" to a clip the app just switches off. No history of it or anything. I am stumped. Please advise. Tag: S.O.S Tag: 8930
  - 23
    - MM2 limit on number of slides? I tried to create a movie with about 800 slides (~40 minutes with 5 sec/slide and transitions). I have a fast machine (2.8Ghz hyperthreaded P4, 1GB RAM, 200GB disk, 3GB swap), but once I added the transitions and music, MM2 slowed to a crawl. In an attempt to make it more reasonable, I split it into two shows of about 400 slides each. It helped, but not much. But here's real problem #1. When I tried to save the movie as avi, I got a "not enough disk space" message even though I have scads of available space and the swap is distributed across physical disks. I was able to save the movie as wmv. And here's problem #2. The first movie shows the first 238 slides and then gets "stuck" on the 238th slide even though the music continues. The second movie gets "stuck" after 134 slides and shows black (even though there isn't any black with the transitions I used). At first, I blamed the DVD burning software, but it's the wmv file itself--confirmed by using windows media player. Any ideas about what's going on? RobertJ Tag: S.O.S Tag: 8928
  - 24
    - Extend time on Volume Fades and Effects? Is it possible to extend or adjust the time on the Volume Fade-In or -Out? How about adjusting the time on the Video effects? Tag: S.O.S Tag: 8927
  - 25
    - Moviemaker 2, A followup To those of you who have been following my complaints regarding Moviemaker 2 since around 8 December, and have yourselves contributed suggstions, I offer this bit of information. Dump the freebee MIcrosoft Moviemaker program, I will bet that I alone have forwarded at least 50 of those automatic problem reports to Microsoft. Get out your wallet, brush away the moths, and Invest around $70.00, to get a boxed copy of ROXIO EASY CD CREATOR, rev 6 platinum. I tried it myself,you will be amazed at the results with transitions, titles and music. The operating controls are similar to the remote control on your television.Then when you are thru, a second portion of the program/package, allows you to drag and drop the video to CD. Another option at about the same price level, is PINNACLE STUDIO 8, And if you are willing to go up to the $100.00 range, there is Another ROXIO product called VIDEO STUDIO 7. Now if I can get Microsoft to fix an annoying fault in MONEY 2004, I will be a happy man. Merry Christmas, Chanukka, Feliz Navidad (which ever applies) to all. Don Taylor This is not a paid commercial. Tag: S.O.S Tag: 8921

NEED help I was messing around today doing a video, it works fine but I can't get it to go back to the original menu so I can just record voice, its movie maker 2.... help!!!! email me an leave de answer in here as well THANX so much for helpin!

Top