How do I get rid of windows search program?

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Media Center overrides sound card! Help! I just finished configuring Windows Media Center...and I think it has control of my sound card driver. Dolby Digital Live and DTS Interactive no longer work. (both output 2ch PCM) In fact, changing the system input settings on my sound card no longer stops the output of the current program, which it used to to do. I've played with every setting I can find. I tried rebooting. What am I missing? How do I get my sound card software back in control? I want DTS Interactive back. In fact, I want all my audio processing functions back. My card refuses to output anything but 2ch PCM, except when it's passing through 5.1. And none of it's processing functions work. Google was no help, neither was searching the site. Anyone got any ideas? My sound card is an HT Omega Claro. I'm running Vista Ultimate x64 with SP1 Tag: How do I get rid of windows search program? Tag: 180886
  - 2
    - Vista Media Center: "Tuner Unavailable" while Trying to Set Up New Satellite Box I am running an HP Pavilion m9077c with a ViXS PureTV-U 48B0 tuner (NTSC/ATSC) under Vista Home Premium. I just had my DirecTV service upgraded from standard to HD and now cannot reconfigure Media Center for the new box. Once I got the new satellite box installed, I reran the TV setup wizard, which worked fine until I needed to input the code for my satellite remote, when I ran up against the "you can't make more than 31 tries to get the right code" feature. Since then, every time I rerun the wizard, it runs for about 30 seconds then gives a "tuner unavailable" error when the it tries to get the necessary information for the Program Guide. I have tried everything I could think of--restarting the computer, resetting my Internet connections, power-cycling the satellite box, etc. I also followed every step HP recommended for "can't find tuner" on its help site, without success (I could neither install updated drivers for the tuner nor use System Restore). I've had no problems watching TV on Media Center until now. Any ideas as to what could be wrong? Is this related to the remote-code-tries limit? Tag: How do I get rid of windows search program? Tag: 180881
  - 3
    - Sony Computer and a Samsung TV??? Hi everyone, how can I hook up my Sony Vaio CR Series to my Samsung Slim Fit TXS TV? I wanted to download a movie and which it on my TV instead on my laptop. Thanks in Advance, Ethel Mertz Tag: How do I get rid of windows search program? Tag: 180879
  - 4
    - Wrong programing I'm at a loss as what to do about my TV programing. My McAfee had a gliche the other day and I had to uninstall it and then install it. About that time my media center programing started showing the program guide and hour ahead. I went into my control panel and made sure the clock and daylight savings time was right. I tried downloading the cable guide again in the media center. It is still wrong and won't record the right shows now. Does anyone have any other suggestions???? -- -- CDH Tag: How do I get rid of windows search program? Tag: 180878
  - 5
    - Vista x64 SP1, VMC stuttering with 4GB RAM I installed a "DNTV Dual Hybrid PCIe S2" digital TV tuner the other day on my Vista x64 machine. Hardware is E6600 on Gigabyte 965p-dq6, XFX 7900Gt extreme and 4x1GB RAM. I had issues with the TV stuttering in VMC. A reboot of the computer would always fix it. I contact the support people (for the tuner) and am told to remove some of my RAM and see how it goes. So I pull out 2GB of RAM (leaving 2GB) and try again. It fixed the problem. What is going on here? Tag: How do I get rid of windows search program? Tag: 180871
  - 6
    - Media Center wont launch using the remote control... Please Help Hey guys, I have an HP Pavilion DV9417ca Laptop with Vista Premium SP1. The problem I'm having is the remote control will not launch Media Center with the green button (the one that came with my laptop and is stored in a slot at the side of the laptop). The remote does work for everything else, QuickPlay, etc and will work with all the commands once Media Center is running. I installed MCE Customizer and was playing with some of the settings and this has caused the problem (it work before this time). I uninstalled MCE Customizer, however, Media Center still won't launch from the remote control. Thank you for any help. Cheers Paul btw, I also posted this at the Green Button forum but still no go... they are very helpful though. -- HP Pavilion DV9417ca Entertainment Laptop AMD Turion 64 x 2 core 1.8GHz 160GB/2GB/NVIDIA GeForce Go 6150 17"Wscreen/Wifi/BT/Built-in cam/RC Vista Premium x32-bit SP1 iPAQ 2490 WM5 Tag: How do I get rid of windows search program? Tag: 180870
  - 7
    - Setting Folder Behaviour I don't know how I changed my folder settings, but I did and it drives me crazy, so I'm desperate for step-by-step instructions on how to get old settings back!! K, when I click Start- My Documents- Then any folder in the 'my documents' folder, ex. If I double click on My Pictures, a new window pops up titled Search Results, telling me that to start my search, follow directions in left pane...instead of opening my Folders Content. Thanks! Tag: How do I get rid of windows search program? Tag: 180869
  - 8
    - Burning recorded TV From what I'm reading I need sonicencoders.msi. to burn Video DVD with MCE 2005. I built the system and the files did not come with the OS. I Googled sonicencoders.msi. and cannot find a link. I searched Sonis's web site and could not find it. Can someone tell me how to get this or what to get in it's place? Microsoft has done it to me again. Thank You John Tag: How do I get rid of windows search program? Tag: 180866
  - 9
    - Picture "snowy" with Vista MCE The best way I can describe this is - remember when we used to have the video/tv switches for video gaming on the Atari? It looks like that - like you're trying to watch tv when it's switched to Video Games. TV Tuner is a Hauppauge WinTV HVR-1600. Any thoughts? Tag: How do I get rid of windows search program? Tag: 180864
  - 10
    - Media Center ehRecvr.exe and ehrec.exe My Vista Media Center started crashing two days ago. It won't record and starts choppy. Here is the report it generated: Problem signature Problem Event Name: CLR20r3 Problem Signature 01: ehrec.exe Problem Signature 02: 6.0.6001.18000 Problem Signature 03: 4791937d Problem Signature 04: ehepg Problem Signature 05: 6.0.6000.0 Problem Signature 06: 4791a67a Problem Signature 07: 3a6 Problem Signature 08: 0 Problem Signature 09: em.InvalidCastException.DCC1CDFA OS Version: 6.0.6001.2.1.0.768.3 Locale ID: 1033 Problem signature Problem Event Name: APPCRASH Application Name: ehRecvr.exe Application Version: 6.0.6001.18000 Application Timestamp: 47919381 Fault Module Name: StackHash_9f24 Fault Module Version: 6.0.6001.18000 Fault Module Timestamp: 4791a7a6 Exception Code: c0000374 Exception Offset: 000b015d OS Version: 6.0.6001.2.1.0.768.3 Locale ID: 1033 Additional Information 1: 9f24 Additional Information 2: d7ff9758c0b1515dc47ce938dc71bf5a Additional Information 3: e0f6 Additional Information 4: a97f2db5250aa5e9f918cb551d85cb17 Tag: How do I get rid of windows search program? Tag: 180863
  - 11
    - ehrecvr.exe error I keep getting an ehrecvr.exe error and it keeps poping up after I send an error report. this is what I get. I have not installed any thing new but I have had a problem watching Netflix on line. szAppName : ehrecvr.exe szAppVer : 5.1.2715.3011 szModName : Indiv01.key szModVer : 11.0.6000.7000 offset : 000af7f0 Any help would be great. Thank you. Tag: How do I get rid of windows search program? Tag: 180862
  - 12
    - Program Has Stopped Responding This is a multi-part message in MIME format. ------=_NextPart_000_041C_01C890DE.BE58A8C0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I get the above message when I click on certain items in Vista Media = Center. But, it doesn't do it with everything. For instance, I'll get that = message when I click on Mira World TV or FOX Sports. But I can get into Discovery or MovieLink. I'm running Media Center on Vista Ultimate (32) with NVIDIA 7300 LE and AverMedia M780 tuner. Does anyone know of why this occurs and if there = is a fix? Thanks. ------=_NextPart_000_041C_01C890DE.BE58A8C0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.6000.16609" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV>I get the above message when I click on certain items in Vista = Media=20 Center.<BR>But, it doesn't do it with everything.  For instance, = I'll get=20 that message<BR>when I click on Mira World TV or FOX Sports.  But I = can=20 get<BR>into Discovery or MovieLink.<BR><BR>I'm running Media Center on = Vista=20 Ultimate (32) with NVIDIA 7300 LE and<BR>AverMedia M780 tuner.  = Does anyone=20 know of why this occurs and if there is a<BR>fix?</DIV> <DIV><BR>Thanks. </DIV></BODY></HTML> ------=_NextPart_000_041C_01C890DE.BE58A8C0-- Tag: How do I get rid of windows search program? Tag: 180860
  - 13
    - Need an Infinite Loop Fix? Could someone please tell me if Microsoft or anyone has ever come up with a SIMPLE repair or fix for the infinite loop so many folks has gotton over the years when attempting to run the windows update program? The green bar just continues to run left to right and nothing ever comes up. This has happenned to me at least 4 times over the years and I always forget what I did to fix the problem in the past. Windows XP Home Edition SP2 Thanks very much for any replys Tag: How do I get rid of windows search program? Tag: 180859
  - 14
    - Unable to play video on projector Using an Acer laptop with Media Center version of XP and a Viewsonic DLP Projector(vga cable), I have set the laptop to presentation mode and get the same image on the laptop screen and the projected image. When I try to play a DVD, I get the frame of Media Player (with controls) on the projector and the movie plays on the laptop screen. Projecting photos or PowerPoint works fine. I am just not getting the DVD playing on the projector. I have also tried reseting the Display Settings in Control Panel. Any suggestions? Thanks! Tag: How do I get rid of windows search program? Tag: 180858
  - 15
    - Xbox360 & Media Center Hello all, I have an HP Pavilion laptop with Media Center and an Xbox360. Previously, I was able to readily, easily, swiftly connect the two machines via Media Center. Now, after a recent repair that required a hard drive reformat and a hard reset of my wireless router, my PC cannot "find" the "extender" on my network...even though I can see it when I pull up the full network map. Xbox360/Microsoft's call center has been useless. I turn to you and your expertise. Please, if you can, help. The Xbox360 is connected via ethernet, the PC is wirelessly connected. Both machines are visible on the network. Resets do not help. My wife's PC which I did NOT set up suddenly appeared on the 360 as the machine from which to connect/stream. Don't know what else to say, just need some advice. Thank you. Tag: How do I get rid of windows search program? Tag: 180857
  - 16
    - EDITING/Create An Association In The Folders Options Control Panel First of all, would like to extend my 'thanks' to all those whom have assisted me in the past with 'minor' problems that, are 'major' to those like myself whom are currently learning on our own, the vast functionalities of home PC! Though frustrating at times, the fun in learning from others, is the reward. Thank You, All! Currently I am having problems EDITING anything in MY PICTURES/DOCUMENTS folders. When I point and right click, EDIT, a window appears with a 'small Red Ball enclosing a White 'X' on left/center side, with.."This file does not have a program associated with it for performing this action. Create an association in the Folders Options control panel." This is new to me as I've just recently began hobby with Photos, though this same warning that pops up when attempting to EDIT documents, such as a Resume. Would appreciate any help. Thank you all, again. -- Beto Tag: How do I get rid of windows search program? Tag: 180845
  - 17
    - display while watching recorded tv hi, i have been recording tv on my media centre for a long time now and all of a sudden, the buttons on the top and bottom of the screen will dissapear entirely and i can only control the recording with the remote. i then have to use task manager to end media centre. can anyone help please................. Tag: How do I get rid of windows search program? Tag: 180843
  - 18
    - ATI Driver Issue Solved I have seen in various places people having problems with ATI Catalyst driver installations which resulted in MOM.... and CLI... errors when the computer started up. After trying multiple clean XP installs I figured out that the problem was that it needs BOTH .NET 1.1 and .NET 2.0 installed for the driver to work correctly. Tag: How do I get rid of windows search program? Tag: 180835
  - 19
    - CANNOT VIEW PICTURES IN MEDIA CENTER MEDIA CENTER WILL NOT DISPLAY PICTURES FROM DVD OR FROM HARD DISK ANYMORE . I KNOW THAT THE DVD IS READABLE WITH MEDIA CENTER , TRIED IT ON A LAPTOP W/VISTA HOME PREMIUM. I AM RUNNING VISTA ULTIMATE. I CAN VIEW PICTURES THROUGH PHOTO GALLERY AND THEY ARE IN JPEG FORMAT. I RESET MY PICTURE LIBRARY AND STILL NO GOOD. IF I VIEW FOLDERS IN PICTURE LIBRARY THEY ARE EMPTY. IF I VIEW BY TAGS OR DATE TAKEN IT SHOWS ITEMS ARE THERE BUT IT WILL NOT DISPLAY PICTURE EVEN SAMPLE PICTURES THAT CAME WITH THE COMPUTER SOFTWARE. I HAD BOUGHT NERO 7 QUITE SOME TIME AGO AND TRIED TO INSTALL IT ON MY COMPUTER NOT KNOWING THAT IT WAS NOT COMPATIBLE WITH VISTA. THEN I BOUGHT NERO 8 , BUT COULD NOT INSTALL IT UNTIL I HAD 7 PROFESSIONALLY REMOVED. NOW I UNINSTALLED 8 AND STILL CANT VIEW PICTURES. I'M NOT SURE IF NERO IS CAUSING MY PROBLEM. I HAVE BEEN TOLD THAT THERE ARE COMPATIBILITY ISSUES WITH IT. TRIED TO RESTORE PREVIOUS VERSIONS OF MEDIA CENTER BUT THERE ARE NONE ON MY COMPUTER. ALSO RECENTLY HAD PROBLEM WITH A WINDOWS UPDATE THAT WAS NOT SUPPOSED TO BE RELEASED, SO I WAS TOLD BY MY IT GUY WHO HAD TO FIX IT BECAUSE IT GOT STUCK IN A LOOP WHEN I TURNED IT ON. I ALSO HAD HIM INSTALL ANOTHER HARD DRIVE WHILE HE WAS DEBUGGING EVERYTHING . SO MY PICTURE FILES WERE TRANSFERRED FROM MY "C" DRIVE TO MY "F" DRIVE. IS TIS MAYBE THE PROBLEM? ALSO MY PICTURES WERE ALL RATED THROUGH PHOTO GALLERY BEFORE I HAD IT FIXED. AND NOW SOME OF THEM DON'T HAVE RATINGS ANYMORE Tag: How do I get rid of windows search program? Tag: 180827
  - 20
    - localhost does not resolve to 127.0.0.1 i am having weird results when trying to access local web server from browser when I type http://localhost - it hangs forever. 127.0.0.1 works fine. I checked my hosts file and 127.0.0.1 localhost is there. I tried to ping localhost and it does not seem to resolve to 127.0.0.1 - this is what I got. Any ideas? C:\WINDOWS>ping localhost Pinging DB-XPPC [::1] with 32 bytes of data: Reply from ::1: time<1ms Reply from ::1: time<1ms Reply from ::1: time<1ms Reply from ::1: time<1ms Ping statistics for ::1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms thanks dan Tag: How do I get rid of windows search program? Tag: 180825
  - 21
    - Cannot start Media Center Extender Service - Please Help! I just recently upgraded my desktop from Windows XP Media Center Edition to Vista Ultimate. Before the upgrade, I was able to access the media center via the Media Center function on my XBox 360 (both the desktop and the 360 are physically wired to my network). Since the upgrade, however, I have not been able to set up my 360 in vista ultimate as an extender. When I try to set up, I get a generic error message. I have gone into the event viewer and notice that the error was caused by the 'Windows Media Center Extender Service' not running. I've gone into the services area, and tried to start the Windows Media Center Extender Service, but keep getting an error message saying that it cannot start. I double clicked on this service and viewed the dependent services. One of the services, PnP-X IP Bus Enumerator is NOT running. When I go to try to start this service, the system tells me that it started and then immediately stopped. Any suggestions on why the desktop would keep stopping the PnP-X IP Bus Enumerator service? I'm assuming that this is my problem, but nothing seems to work. (I've verified that all of the dependent services for this service are running). Any help would be GREATLY appreciated. Thanks! Tag: How do I get rid of windows search program? Tag: 180824
  - 22
    - WMC disappeared... I use my computer on a daily basis for gaming and movies. I sat down today and pulled the dvd I was watching yesterday out and put another one in, but autoplay didn't work. So I searched for Windows Media Center, no results. I check autoplay settings and where WMC used to be for DVD's is now a blank program icon with no words next to it. I tried recovering with the disk but it was caught up on compatibility check. Is there anywhere I can go to to just get WMC back without having to run recovery? Tag: How do I get rid of windows search program? Tag: 180817
  - 23
    - Tuner Not Available After Recording Simultaneous HDTV/Analog Progr If Windows Media Center finishes recording an HDTV program while simultaneously recording an Analog program, the Analog recording fails. Media Center is then no longer able to display Live TV or record subsequent programs using either HDTV or Analog signals. It requires a PC reboot to restore functionality in Media Center. This problem does NOT occur if Media Center finishes recording an Analog program while simultaneously recording an HDTV program. The result is that any time Media Center is scheduled to record an HDTV program that ends before a simultaneously recorded Analog programs ends, all subsequent programs fail to record. This problem occurs when either manually recording programs or if Media Center is automatically recording scheduled programs. I am using a VisionTek/ATI TV Wonder 650 Combo USB tuner with Windows Vista Ultimate 64-bit. Steps to reproduce: 1. In Windows Media Center, start recording an HDTV program. 2. Start recording an Analog program. 3. Stop recording the HDTV program. 4. Stop playing the HDTV channel. 4. Windows Media Center displays the error "Recording Failed To Start: Windows Media Center has encountered an error and is unable to record <name of Analog program>. Please restart the computer and then reschedule the recording." 5. Select any Analog channel in Live TV. 6. Windows Media Center displays the error "Tuner Not Available: The tuner is currently in use by another application or is not working. Please close all other applications, restart Windows Media Center, and then try again." 7. Select any HDTV channel in Live TV. 8. Windows Media Center displays the error "No TV Signal: There is currently no TV signal detected for this channel. The channel may be temporarily off-the-air, or you may need to adjust or reconnect your TV antenna." 5. Reboot PC. 6. Viewing Live TV and recording shows works normally in Windows Media Center for both Analog and HDTV signals (until the initial condition described above occurs again). This problem can be reliably reproduced every time the above steps are followed. The tuner's "ATI Unified AVStream Driver" listed in Device Manager reports it is working normally at all times. I am using an antenna for the HDTV signal and a cable signal for Analog. The cable signal is connected to the TV Wonder using S-Video from a cable box. Hardware Configuration: EVGA e-GeForce 8600 GTS video card EVGA nForce 680i SLI motherboard Intel Core 2 Quad Q6600 processor 2GB RAM (two 1GB Patriot memory sticks) VisionTek ATI TV Wonder 650 tuner Software Configuration: Microsoft Windows Vista Ultimate 64-bit Windows Media Center 6.0.6001.18000 (longhorn_rtm.080118-1840) ATI Catalyst 8.3 nVidia Forceware video driver 169.25 nVidia nForce chipset driver 15.08 I've pursued this issue with both ATI/AMD and VisionTek. ATI says the problem is with Windows Media Center. VisionTek has been unresponsive. This problem has persisted through several tuner driver upgrades and Vista updates. I am using the most recent drivers and Vista updates. Any suggestions for resolving this? Tag: How do I get rid of windows search program? Tag: 180812
  - 24
    - Protecting a single file/folder Hello, Just a general question here... but it's one I have searched all through the help files and cannot find the answer to. I need to know if there is any way to protect: 1.) password protect a single folder on the C drive of a computer? 2.) Protect the C drive from a user deleting/editing files on it. Basically, my problem is, I have one machine which is only allowed this one user account, but I must share it with another user. The other user tends to get "brilliant" and start playing around on the machine changing settings, etc. I have certain files/programs on the machine that I don't want all messed up from someone playing around... as innocent as it may be. I figure if I can at least protect my own folders (and maybe the C drive) that will help tremendously. Anyway, any advice on how to handle this would be great. Thanks! Tag: How do I get rid of windows search program? Tag: 180808
  - 25
    - Suitable video card for HDTV on mono-core system Thinking of upgrading my video card - this one was recommended to me; Sapphire ATI RADEON HD 3650 512MB DDR3 Dual DVI PCI-Express 2.0 Graphics Card Basically looking for a reasonable choice to upgrade by ATI Radeon x300 (non-hd) so that I can use my MCE to power an HDTV. I am not looking for the absolute best technology - MCE is a HP 3 GHZ hyper-thread intel and I only plan to spend about a grand on the HDTV (probably plasma). Tag: How do I get rid of windows search program? Tag: 180806
- Next
  - 1
    - One windows session and one RDP connection Hi Guys, I know how to have multiple rdp sessions but can't seem to figure out something. Every time i connect to the pc via rdp from network it logs off the user logged in currently on the machine and then allows rdp to connect. Is there anyway i can leave the user logged in on the pc and have another silent user through rdp? Thanks in advance... Tag: How do I get rid of windows search program? Tag: 180797
  - 2
    - WMC on Vista but can't see video on my admin profile but other admin profile works fine I have attached an earlier thread (see below) regarding this problem but I have since discovered that although sometimes I can get WMC or Windows Media Player to work (view video not just hear audio) on my profile (set as Admin) it works fine when I switch to my wife's profile (also Admin) without rebooting, however if I switch back to my profile neither WMC nor WMP will show video but as soon as I go to her profile both work fine. Any help is greatly appreciated I just tried that and I still have the same problem. I did notice that I also can't view .wmv files in Windows Media Player. Could it be a codec issue? "Bob" <bob@nowhere.net> wrote in message news:baGdnSi7dPEtR3fanZ2dnUVZ_sWdnZ2d@comcast.com... > Try getting the latest driver directly from HP or Hauppauge websites? > > "Brad S" <schluternospam@gmail.com> wrote in message > news:OKHqHZ5jIHA.3512@TK2MSFTNGP03.phx.gbl... >> Sorry for the long time delay. I tried both new video driver (now the >> most current version 2/25/08) and uninstalled the Hauppauge, which Vista >> then reinstalled after a reboot, but I still get the same problem as >> before . I even tried a newer Hauppauge driver than comes with Vista. >> Any other suggestions that I can try? >> Thanks again for your ideas >> >> "Bob" <nowhere@nowhere.net> wrote in message >> news:doidnRSb2oPsrknanZ2dnUVZ_t-nnZ2d@comcast.com... >>> Uninstall Hauppauge then reboot and let it reinstall. >>> >>> -- >>> *Report back, please* >>> >>> >>> "Brad S" <schluternospam@gmail.com> wrote in message >>> news:usLdAjfgIHA.5900@TK2MSFTNGP02.phx.gbl... >>>> No the unit came preloaded with a HP install "custom" install of Vista. >>>> No separate CD's >>>> "Bob" <nowhere@nowhere.net> wrote in message >>>> news:SqydndL2bdoyQU7anZ2dnUVZ_gednZ2d@comcast.com... >>>>> Do you have a Hauppauge CD? >>>>> >>>>> -- >>>>> *Report back, please* >>>>> >>>>> >>>>> "Brad S" <schluternospam@gmail.com> wrote in message >>>>> news:OPT5XubgIHA.484@TK2MSFTNGP06.phx.gbl... >>>>>>I have a fairly new HP desktop running Vista Home Premium. WMC worked >>>>>>fine but on several occasions I couldn't see video, it didn't matter >>>>>>if it was recorded or live or if I switched to Win Media player I >>>>>>could hear the audio but couldn't see the video. I could clear the >>>>>>problem with a reboot but now I can't get it to work regardless of >>>>>>rebooting. Any ideas would be appreciated. >>>>>> Thanks >>>>>> >>>>>> video card is Hauppauge WinTV HER-1800 (Model 78xxx, Combo ATSC/AM) >>>>>> display adapter is ATI Radeon HD 2600 PRO Tag: How do I get rid of windows search program? Tag: 180790
  - 3
    - Cannot download Microsoft Intaller 3.1 I checked this forum out and could not find the right answer. Please help me to fix the problem. I've tried manually also. Thank you in advance. -- games-lady Tag: How do I get rid of windows search program? Tag: 180788
  - 4
    - Certain Channel's TV Show Guide COMPLETELY wrong Recently I noticed that the TV show guide listings are wrong but only for certain channels. For example, in my DirecTV listing for NY channel 231 (Food Network) is just plain wrong. Not off by a couple of hours, the entire days' guide is wrong. I didn't fully research how many channels this also occured with but there were at least 2 other channel near 231 thta had the same problem. I tried downloading the guide a few times. I tried using the DirecTV guide for USA not just for NY. The problem persists. This gets annoying since the program info doesn't match what show I'm recording. It also messes up the 'search guide listings' factor. HELP! Tag: How do I get rid of windows search program? Tag: 180782
  - 5
    - Can i fix files with XP Professional? I have an error of a missing file or corrupt one in system32\hal.dll I can not boot at all, even in safe mode, but do have the options of boot menus but they dont work. I have found ways to fix my problem without using my system recovery disk and erasing everything but they all require the XP disk which doesn't come with our computers. So,ã??since it is just a file, can i buy a XP pro disk to boot fix the problem? If i can at least boot to get my files off i can do a restore. Sorry if this is a repost, i couldnt find the one i did yesterday.... Tag: How do I get rid of windows search program? Tag: 180780
  - 6
    - Best ext hard drive interface (USB or FireWire) for MCE recording Need a bigger HD for my MCE to record HDTV but there's no room internally. I know FireWire is faster then USB, but I'm concerned with waking up from sleep mode also. Anyone have any experience with this? Tag: How do I get rid of windows search program? Tag: 180771
  - 7
    - TV tuner for Media Center Once I upgraded to Vista my Media Center can not find the TV tuner card which worked before. I even bought a Hauppauge WinTV-HVR1600 media center kit and still the same problem, even though the card works with their software. How do you get Media Center to recognize the card? Tag: How do I get rid of windows search program? Tag: 180769
  - 8
    - Any good? => Sapphire ATI RADEON HD 3650 512MB DDR3 Dual DVI Thinking of upgrading my video card - this one was recommended to me; Sapphire ATI RADEON HD 3650 512MB DDR3 Dual DVI PCI-Express 2.0 Graphics Card Basically looking for a reasonable choice to upgrade by ATI Radeon x300 (non-hd) so that I can use my MCE to power an HDTV. I am not looking for the absolute best technology - MCE is a HP 3 GHZ hyper-thread intel and I only plan to spend about a grand on the HDTV (probably plasma). Tag: How do I get rid of windows search program? Tag: 180767
  - 9
    - Vista MC Error Code 13 Hi all! Been having a few problems with my Media centre guide since I upgraded my TV card. Since upgrading and scanning for new channels it has been unable to download the guide data, before it would just sit on the same screen with the progress bar and not move. Earlier tonight I tried it and its giving me error code 13. I have searched the net and their doesn't seem to be any solutions for Vista MC only XP MCE. Hopefully somebody on here will know :) Thanks -- Paul Tag: How do I get rid of windows search program? Tag: 180758
  - 10
    - Media Center - How to Sort music by Files Hi, does anybody know how to sort music by Files? There are only possibilies to Sort by Name, by Artist, by Album etc., but I can not find sort by files. Tag: How do I get rid of windows search program? Tag: 180750
  - 11
    - New Directv customer Any news on release date for HDPC20? This is supposed to be a cooperative venture between Direct TV and Microsoft with the capability of utilizing Media Center essentially as an HD DVR with other media interrelationship options. Anybody know anything about proposed implementation and release info. It sure would be nice to actually find a practical way to utilize Media Center more effectively with my home theater. olboatman Tag: How do I get rid of windows search program? Tag: 180745
  - 12
    - Service Pack 1 update KB110806 Microsoft Updates prompt me to install the above but it fails to do so. I block it but it still comes up as me blocking a critical update. Do I need this update as I have Service Pack 2. Iv'e tried to delete Service Pack 1 -- it tells me that some of my programs won't work without it. Any solution to this problem. Tag: How do I get rid of windows search program? Tag: 180744
  - 13
    - Live-TV on Media Center PC via Xbox360 extender stops when buffer I recently tried to watch TV with my Media Center Edition 2005 PC and PCI-TV tuner card, controlled via my Xbox360 as extender. It shows live TV alright, but it bluntly stops when the buffer is full. When that happens it shows a message that the buffer is full, but when I change channels it shows the new channel again until the buffer is full again. What do I do wrong? Tag: How do I get rid of windows search program? Tag: 180739
  - 14
    - USB Printing USB Bus goes idle (no Frames) when device issues too many NAK packets because it's receive buffer is nearing full. Device is ready to accept OUT packets from Host after about 500 ms, but host never issues any more OUT Tokens. Using usbprint.sys to deliver the data to the device (printer). Anyone have any information on this? -- Software and Firmware Developer Tag: How do I get rid of windows search program? Tag: 180733
  - 15
    - Can't import video from Windows MediaCenter recorded TV When I try to import video from the Windows Media Center recorded TV folder I get an error message like this: [K:\recorded tv\Breakfast.dvr-ms could not be imported. Unspecified error] I can import files with other extensions from the same folder e.g. .mpg, .avi but not .dvr-ms. Why? I know other people can do this but - why can't I? What am I doing wrong? Thanks for any help... Malcolm H Tag: How do I get rid of windows search program? Tag: 180724
  - 16
    - Antenna Signal: Computer vs. TV Does anyone have any idea why my TV can receive a digital channel but my computer cannot? It worked before, but now does not. Many of the digital channels still come in fine, but the local CBS and CW affiliates are all reading red in the signal strength setup screen. I did install a new VIX PureTV driver on my HP Vista PC, but I don't know if the problem started immediately after that or later. Thanks, Marc Tag: How do I get rid of windows search program? Tag: 180720
  - 17
    - Vista Media Center - RecordedTV Listing Style I have used MediaCenter for XP in the past and though the RecordedTV listings were less sexy, when going through a long list, it's actually a lot easier to use this style than to use the Vista MediaCenter default of large thumbnail images. Is there a way to switch the RecordedTV listings to a simpler, more "old-fashioned" style in Vista MediaCenter? Appreciate your help. Alex Tag: How do I get rid of windows search program? Tag: 180719
  - 18
    - Welcome screen change I recently did a destructive recovery on my HP desktop. In essence, it is an update from MCE 2004 to 2005. Everything is getting back to normal except for one thing: Welcome screen just says "welcome". It boots just fine. Before I go and do something stupid, how do I get into the Welcome screen setup? What I want back is the Welcome screen that shows the administrator icon and name. I know I can reconfigure in UserAccounts but not sure if this will actually change the welcome screen. Any advice? Tag: How do I get rid of windows search program? Tag: 180708
  - 19
    - Tv and Computer Hi all, I can see Media Center on my Tv (I used the configuration for that) but now I can't see it on my computer! Some time ago, I could see it on both devices, being computer's quality poor, but enough for controlling everything. Can someone help me configure everything the right way? Thnx in advance :) Tag: How do I get rid of windows search program? Tag: 180706
  - 20
    - hal.dll error. Need XP Media Center Ed disk to fix I have the <windows root>\system32\hal.dll error that will not let me boot at all, including any safemodes. According to Microsoft, i need an XP media center ed. disk to fix the problem, but i need the disk and my computer's mfg will not help. How do i get my computer to boot and fix the files. Reformating is not an option as i have some irreplaceable pictures on it that i was not able to backup. How do i get a disk? Tag: How do I get rid of windows search program? Tag: 180704
  - 21
    - Hardware problem My windows XP media ( HP Pavillion a1250n ) suddenly won't recognize my camera card readers, my flatbed scanner or my Lightscribe dvd burner. I'm so frustrated. I have tried updating the driver, reinstalling, unplugging, reinstalling, etc. Can anyone help me? I would appreciate any advice. -- TMM7 Tag: How do I get rid of windows search program? Tag: 180695
  - 22
    - LCD TV hook up to the Computer I just bought a 26 inch LCD HD TV and want to have the sound go threw my computer speakers.And also would like to record and that on my computer.My TV has DVI,VGA and HDMI hook up .What is the best connection or theres no difference. I have a Acer computer duel core with hook up for surround sound.But have no TV card.Also if I would buy another vedio card should I get one with the hook ups for HDMI or its not really no need.What connection would I need to get the sound coming from my computer speakers?And where would it hook up on my TV and computer?Hope you can help I have a small room and this is the way I have to do it. Tag: How do I get rid of windows search program? Tag: 180690
  - 23
    - ehrecvr.exe error Hi can anyone help with this one. appname: ehrecvr.exe appver: 5.1.2715.3011 modname: vp6dec.ax madver:6.4.2.0 offset: 00001b02 Tag: How do I get rid of windows search program? Tag: 180687
  - 24
    - Connection problem from Xbox 360 to Windows Premium PC I have a problem with connecting an Xbox 360 to a Windows Vista Premium PC I can get it connected but it takes several attempts before it connects First few attempts it comes up with the following error, The xbox 360 has experienced a failure and has been disconnected from the media centre based pc. You then have the option to try again, and normally after 3 or 4 attempts it will connect and works great. Its just this small issue with not immediately connecting . The PC and the Xbox are connected Via a Linksys Router, and my PC based Firewalls are off. Its just reall frustrating when 2 new products that are designed to connect just dont every time. -- iain murray Tag: How do I get rid of windows search program? Tag: 180678
  - 25
    - address tool bar missing my address tool bar is missing on my home page? Tag: How do I get rid of windows search program? Tag: 180669

I am running Win XP and my outlook express keeps locking up when I try to
retrieve emails. I have seen a small window popup with the windows search.exe
program involved somehow. Does anybody have this issue or know what is
happening here?

Top

Re: How do I get rid of windows search program? by CSM1

CSM1
Sat Mar 29 05:00:40 PDT 2008

"CapnZero" <CapnZero@discussions.microsoft.com> wrote in message
news:D9FE382F-EEE3-4D37-989E-F1D31ED8B1FC@microsoft.com...
>I am running Win XP and my outlook express keeps locking up when I try to
> retrieve emails. I have seen a small window popup with the windows
> search.exe
> program involved somehow. Does anybody have this issue or know what is
> happening here?

Have you scanned for malware?

I suppose you doe have file attachments enabled in Outlook Express.
I in Tools > Options on the Security tab. Uncheck the one that says "Do Not
allow attachment to be saved..."

--
CSM1
http://www.carlmcmillan.com
--

Top