unable to open drives

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Media Center has stopped working Hi, Since about the middle of last week I have been getting a pop-up the windows, Media Center Store Manager Update has stopped Working. Windows is checking for a solution. Also when I try to run Media Center it runs for 15 to 30 seconds and then I get pop-up saying Windows Media center has stopped Working. Window is checking for a solution. Have received no solution to either. My OS is Vista Home Premium 32bit. Any ideas? Thanks, Carol Tag: unable to open drives Tag: 172997
  - 2
    - Vista Media Centre won't sleep reliably My Vista Media Centre is set to sleep after 10 minutes; normally this works just fine when VMC isn't running. Every day I put the computer into standby mode at night. During the night it comes on automatically to download the Guide off the Internet; but it almost never goes back to sleep again; so the PC is always on when I come down in the morning. What is causing this? Why does VMC reliably go back to sleep again? NigelS Tag: unable to open drives Tag: 172996
  - 3
    - Media Centre and Live Messenger, incompatible Hi, I have Media Centre running on my PC: That is: Windows XP Media Centre Edition , version 2002 Service Pack 2 I have discovered that I cannot use "share Folder" and "Remote Assistance" associated with MSN Live Messenger. I this a limitation in Media Centre Edition or have I done something wrong with access rights? Thanks for all help... /Knut Tag: unable to open drives Tag: 172992
  - 4
    - how to get a small screen when I minimize? I have bought a Hauppauge WinTV single tuner for my laptop (Toshiba P100 laptop, Vista Home Premium 32bit). At present, if I minimize, the screen goes black then disappears altogether. After a few seconds the sound comes back, but there is no sign of Media Centre. I would to have the TV/radio showing in a window in the corner, so that I can maximize instantly when required. How can this be done? Tag: unable to open drives Tag: 172991
  - 5
    - GetErrMsg:CannotOpenWebPg-CookiesAreNotEnabled--ButMyCookiesAreEna i receive this message on certain web pgs: 'Error Message: Cannot Open Webpage Because Cookies Are Not Enabled'---i go to tools, int options, privacy, advanced where cookies are already enabled- i then re-enable cookies to be sure, yet, i, again, cannot open those same web pgs and receive the same message-----went to my isp and they say that microsoft has to be contacted----anyone have the remedy please, thank you -- ___things may not be as they seem...nor are they otherwise___ Tag: unable to open drives Tag: 172989
  - 6
    - media center black screen running premium home build 6000, 2.80 gig amd 64 x2 dual core, asus m2npv-vm1.xx bus clock 200 meg latest phoenix bios, 2014 meg mem installednvidia geforce 6150 display adaptor, acr 22" monitor with Creative sb Audigy 4 and Hauppauge win tv 350 card. When I enter windows media center, screen goes black. Mouse button present. I have tried clicking on mouse, nothing. I hit ctr alt del, and screen brings taskmaster screen, click on tasks, they appear but flicker, and screen stays black around them. Sometimes media player screen will then come up, but will dissapear again if I try to use system. All other video on system seems good, except when tuner card plays tv, movement stutters like slow refresh rate. I think this is from a lousy video card (chip), and I am installing a new card when it arrives. Help or suggestions for black screen. I reinstalled nvidia drivers and latest model, and that did not seem to help at all. -- Bill C Tag: unable to open drives Tag: 172988
  - 7
    - media center black screen -- Bill C Tag: unable to open drives Tag: 172987
  - 8
    - No Live TV Recently purchased two HP systems with Vista Home Premium, and couldn't receive a TV signal in Media Center on either. I replaced my spouse's tuner card with a Hauppauge card and it works fine (Cox cable transmits an HRC signal). On my system I have a ViXS PureTV-U 48B0 (NTSC/ATSC Combo) card which has (as far as I can tell) no configurable software. Is there a way to get this card to recognize the HRC signal? Thanks! Tag: unable to open drives Tag: 172986
  - 9
    - Media Centre - Create DVD I get a unsupported file message when I try to create a DVD from my recordings even though they are .dvr-ms files, would anyone be able to help with this? Tag: unable to open drives Tag: 172979
  - 10
    - Windows Explorer Colors Is it possible to change the color of selected folders in Windows Explorer? I am referring to the folders listed under C:\ It would be much easier to find a critical folder in a long list of folders if it could be color-coded. I am running XP Windows Media Center Edition on a 16 bit machine. Thanks for your help. Tag: unable to open drives Tag: 172972
  - 11
    - Computer locks when an application is waiting Hey folks! Problem with my computer: -Turion One-Core-cpu. with 2 GhZ/512 KB L2-Cache -HD: 60 GB; 5400 UPM; 8 MB Cache -Chipsatz: ATI Xpress 1100 -1 GB RAM; Pagefile disabled -OS: Windows XP SP2 with all updates 1.) When I put a disc into the drive; e.g. Nero or explorer locks up till the cd spinned up. 2.) When I open a website and play a flashvideo and minimize the window, the sounds stucks for one second. 3.) I just wanted to scroll the cover flow list in iTunes. It started to load data (I think the covers) from the hd. Parallel I wanted to chat - but what was that: The Miranda window locked up! :-O See the screenshot: http://www.easy-coding.de/index.php?page=Attachment&attachmentID=362&h=c65f2c5b5a4d2c1c7aa77e05b20f98342be20520 Thank you for your answers! Tag: unable to open drives Tag: 172969
  - 12
    - SP2 install from a CD Hello, I already have XP that came preloaded with the Compaq laptop. The system has SP1 and I am having problems downloading SP2. I have another XP disc with SP2 from a retired computer that has failed. Is ther a way to use the CD in the laptop to install SP2? I see the SP2 files but don't know how to load them since they are not executables. Thanks, Greg Tag: unable to open drives Tag: 172960
  - 13
    - security problem hi we have a laptop which is not connected to our domain and for some reason the local administrator account can access shared drives and say add new folders and stuff we also tested on another laptop logged on local and came up with the login prompt (which is what we want) when creating the new folder we found out the local administrator account on the server took owner ship of the folder as well (which i think is right) but i just need to understand why for some reason that this local admin account which is not on the domain can access shares which need user permissons. any ideas Tag: unable to open drives Tag: 172948
  - 14
    - Vista upgrade - OEM I have a Fujitsu-Siemens Scaleo P MCE 2005 PC, bought Dec 2005, which is used as the family PC (we also have a second) and also a Media Center PC. I'm quite happy upgrading software/hardware and supporting the family with using the PC. I were to upgrade to Vista, is there any reason (eg legal, technical, functional, support etc) why I shouldn't buy an OEM version of Vista Home premium upgrade rather than non-OEM when OEM is half the price? Tag: unable to open drives Tag: 172947
  - 15
    - Can't remove Mcafee virusscan-enterprise Running XP Home on a Dell Dimension 9150. I attempted to remove Mcafee 8.0 before upgrading to 8.5 and somehow my registry became corrupted and I cannot remove this program. Moreover McAfee is now disfunctional. On the McAfee web site they suggest a very convoluted procedure for removing this program which invloves some serious surgery on the registry. As an an alternative a colleague suggested that I run an OS upgrade to XP PRO and this might free up the registry. I have a slipstream CD for Pro but am loath to do this unless there is some chance that it will do the trick. Other than this problem my system seems to function fine. My question is: will this approach overcome the registry problem. If so, how shall I run the upgrade to PRO.....Many thanks -- CinciDave Tag: unable to open drives Tag: 172940
  - 16
    - screen resolution Hi Can someone please explain screen resolution to me? I understand when I'm using Photoshop the more pixels per inch the sharper an image will be. Does the same apply to screen resolution? If I increase it, will the text be sharper? Also, why do all the icons on my desktop get smaller with higher resolution? I've got it set to 1024x768 at the moment. -- Millie Tag: unable to open drives Tag: 172933
  - 17
    - Internet Explorer 7 has encountered an error and must close,!? ately I get this message regularly and aparty from switching to Firefox is there a solution that you know of?. I allways send the info to Microsoft as suggested. Thanks in advance for your help. Tag: unable to open drives Tag: 172928
  - 18
    - Slow - jumpy TV capture on MCE Ultimate I'm trying to setup a MCE using VIsta Ultimate, and configuration runs well and I have the system running. The problem is that when I try to see live TV, I get a jumpy TV capture. I started out with the Pinnacle Vista MCE kit (110iV). As this kit only runs on MCE and I couldn't try it out of MCE, I went back to the store and got an AverMedia card. Installed... and I got the same jumpy capture. This time I tried running it's own software, and... no jumps!!! Is their specific configuration that must be performed for the MCE? Also, I tried to run a DVD on MCE and could not get Dolby surround (even though I have MCE configured for 5.1). When I view the same dvd on another player, I get Dolby Surround. Also, when I try to run a Divx video, even though I can run it on Media Player 11, MCE insists that it does not have the codecs.... But I can't find any sepcific configuration for MCE besides that available on the Settings menu. I did note that the tv capture grew more jumpy as codecs were installed for Media Player. Can anyone provide more insight into this? I am running an AMD Athlon 2.4Ghz, w/ 1 Gb RAM, plenty of disc and a RAdeon 350. Thanks Tag: unable to open drives Tag: 172927
  - 19
    - DEP shuts down Windows Explorer Why would DEP shut down Explorer? Tag: unable to open drives Tag: 172926
  - 20
    - Red Screen instead of Video in Live/Recorded TV When I try to run Live TV or play an old Recording in my XP MCE 2005, it just shows a red screen while audio plays smoothly. The same recorded videos play properly in Windows Media Player. I think this happened after I installed an update which sounded something like KB089250 "Rollup for Update Rollup 2" on Nov 4. Once I got a weird error about ehshell.exe that I reported to Microsoft which suggested that it was due to Intel's Graphics Card. I did a system restore to an earlier date, but the problem persists. I have an Intel GMA 900 onboard graphics card on my 915GV motherboard. My TV Tuner is Hauppauge WinTV 88X. Now I am afraid of re-installing the updates. Help! Thanks... Tag: unable to open drives Tag: 172925
  - 21
    - Media Center 2005 Volume problem Hi, I have noticed that my TV recordings are now having trouble with consistant volume. i.e., normal sounds get quieter. I do not experience the same problem whild watching TV only when I record it. I have an Angel Luminate Tuner Card. I'm using the i/o jacks from my Digital Cable box. Has anybody else had this problem? It sounds like a 'limiter' or auto volume level 'compression' I turned down the volume on my digital cable box. Never had to do that before. I will see if THAT helps when I make my next recording... Dell Dimension 9150 / xps 4?0 Pentium D Dual Core @ 3.2 GHz 4 Gb RAM 500 Gb HD Soundblaster X-Fi Extreme Music ATI 256Mb Radeon (oem) CD & DVD writers Media Center 2005 - Win XP Pro -- peace :) br. patrick Tag: unable to open drives Tag: 172917
  - 22
    - Gaming Crashes. I'm an avid gamer, and my current system happens to be using Windows XP Media Center Edition. A few of my games, have randomly started Crashing upon loading. I've tried updating my Graphics/Sound drivers, and all the patches etc. are dl'd for the games i'm playing. And also, it's not just the games that crash, It's the entire windows system. Computer restarts and all. Any Suggestions? Tag: unable to open drives Tag: 172916
  - 23
    - No DVD Sound in Vista Media Center movieHi All, Recently purchased a new Quad HP 8120 Media Center PC. I can watch TV, record programs and listen to CD's. When I try to play a DVD however, I only get picture; no sound. Tried downloading a driver update from HP...then I had No Sound at all! Any suggestions what the problem is or how to fix it? -- always learning Tag: unable to open drives Tag: 172915
  - 24
    - Windows XP Media Center 2005 crashes upon entering My Videos I am running Windows XP Media Center 2005. Each time I choose My Videos, MC will crash. There is notihing in the event log under Media Center. The MRU referenced videos are all in the same folders as referenced and play properly with WMP. There are nine of them and the SortString is 9,8,7,6,5,4,3,2,1,0 Does anyone have any ideas? Tag: unable to open drives Tag: 172911
  - 25
    - Restore system point gone. I started having problems with computer on Oct 31. Lost msn email folders. Went to use restore system, which has mostly helped fix problems. All restore points are missing before Oct. 31st. Ofcourse, if I use Oct. 31, it give the same problems I had on that date. -- Gary Tag: unable to open drives Tag: 172910
- Next
  - 1
    - Does Vista Media Center Support Closed Captioning in Recorded TV? Does anyone know Media Center's recorded TV will still have closed captioning in it when you play it back? I guess Media Center supports closed captioning while watching live TV. That's great, but will the TV shows you record for time shifted viewing will still have closed captioning or not? If Media Center doesn't support closed captioning in recorded TV, does anyone know what the best option would be for having closed captioning in recorded television on the PC? Tag: unable to open drives Tag: 172909
  - 2
    - music files gone from media center. I still have files under my music in my documents. However, all the same files are gone from media center. I can not copy a cd any more, and all titles show as unknown artist and no name on tracks when i play a cd in media center. My wife side of media center is still functioning perfect. can anyone help me? -- Gary Tag: unable to open drives Tag: 172908
  - 3
    - Blank Screen Windows Media Center was working great. My 2 year old grabbed the remote and started pressing buttons and a blank screen popped up. No idea what she pushed and now I can't get the Media Center back. Any ideas? Tag: unable to open drives Tag: 172906
  - 4
    - FREE!!!CASH OR FREE!!! XBOX 360 ELITE!! Heres the deal http://www.360Elite4free.com/index.php?ref=4279609 this is a hacked refferal code that when activated gives you unlimited refferals. I hacked this site and found a way to get unlimited refferals. Do exactly as I explain 1.Use this link and onlythis link 2. Sign up but when it comes down to where it says postal code type 64392, you can change this later to get your stuff mailed to you, this is the second part to make the hack work. 3. Last but not least sign up for any instant offer and wait for it to credit, and then you will have unlimited refferals to get what you want. I recommend Stamps.com or yahoo success (stamps) because you can cancel at anytime and still get 5.00 in free stamps. When the offer is completed you will have unlimited refferals. I realy did hack this site and im sharing this imformation with whoever wants to get free stuff basicaly. Im sharing the rewards with you Tag: unable to open drives Tag: 172903
  - 5
    - IR Hardware not detected Here is my configuration: Dell 8400 MCE 2005 with Emuzed Angel dual tuner card Dish 322 (one box with 2 receivers) I have connected TV1 using S-Video with Video 1, and TV2 using Composit (plus a S-V to Composit convert) with Video 2. MCE recognized 2 tuner with 2 TV signals, but "IR Hardware not detected" Any help would be greatly appreciated. Tag: unable to open drives Tag: 172898
  - 6
    - Hard Drive Problem ? Ok, I have a eMachine with MC. Last night the hard drive light came on and the screen stick along with the sounds. I had to push the button to shut it down and start it again....and again within a minute or 2 the HD light came on....stayed on and the screen stick. I ran all the virus checkers etc and found no problems. I did a install of XP last nite and ran the disk checker that found no problems. right now the HD light is on for like 2 seconds and I can hear the clicking like its searching for something, then it stops and starts again. This just keeps happening and I cant get it to stop........it does not matter if I'm typing or just watching it....it keeps doing it. I'm thinking that because I reinstalled XP/MC and ran all the checkers I have that its the hard drive itself that must be bad.......somehow ! Any Ideas would be great...........going to set up my standby old computer in the mean time ! Thanks ! Tag: unable to open drives Tag: 172897
  - 7
    - Dual TV receiver and MCE I have Dish DVR 622 which allows me to control one HD and Standard television I have set up with HD going to my Projector in theater room and the 2nd cable going to my office. I'm trying to hook this up to media center and I'm not able to get any TV signal. On my receiver 2nd TV out put is set on Channel 73. When I scan for TV signal media center only show 4 channels. How do I switch it to 73 Wondering if Media Center does support this kind of set up I have tested by connecting the cable line to TV and it works. Any inputs greatly appreciated Thanks, <Ram/> Tag: unable to open drives Tag: 172896
  - 8
    - Power options changes by itself I just build a new mce to replace my old. Installed MCE (xp) since I already own a license i did not consider to buy vista. I have configured and made my new box work excactly as the old/as I want it to, except one little thing. In power options/power schemes I change monitor to never, hard drives 10 min and sleep 30 min. I push apply and OK, and that setting is working quite well until mce have done a recording (powering up by itself, record) - then the power options is changed back to the original monitor 20 min, hard drive never, sleep never. If I change it back it will stay so until next recording. If I reboot the system it still holds my settings - but as soon as it turns on by itself to record it changes my settings. I googled the issue and found 1 guy beliving it to be the latest ATI catalyst, but I'm not sure about that - uninstalled latest catalyst/driver and only installed driver after reboot - problem still there. I have a ANTEC vith VFD (and vfd application) but don't belive that is causing it either. Can I hard code something in the register to keep my settings? Any other solutions? -- MCE 2005 Gigabyte MA69GM-S2h, onboard x1300 ati graphics and HDMI, AMD dual 4400+ Hauppage 150mce, 2048 gb Ram, 2*500GB Samsung HD Tag: unable to open drives Tag: 172881
  - 9
    - trying to play a blu-ray disc dvd I am able to play "normal" dvds with windows media center on vista. However, trying to use a blu-ray disc dvd, nothings works. Media center keeps on telling that it cannot detect a video dvd in the dvd-rom drive. Is this a set up issue or can blu-ray disc dvds not been played here? -- Annette Tag: unable to open drives Tag: 172880
  - 10
    - media center unable to play fixed! i found a solution which will probably help most of the people here as i think even though peoples probs are slightly different, they are the same, it comes from the 64 bit vista, there are actually 2 instals of all your midea players,and each vid file actually selects which version to use,this is what casuse the problem, as even though you think you have the codec you need it could be the 32 bit version, but your vid file may have opened the 64 bit player, and that codec location would probably be empty, there is a simple fix, just search google or yahoo for vista codec pack 4.5.2 (for the 32 bit version) and then search for vista codec x64 components 1.3.3 (if you have a 64 bit machine) these will fix just about any codec problem in vista (the creator is shark007,many thanks to him and go give him a donation!) Tag: unable to open drives Tag: 172876
  - 11
    - Vista Media Center Red Recording dot missing I've noticed that sometimes the red dot is missing from the notification area when I'm recording a program. I have been through the settings and it is enabled. It's not just hidden. I have tried disabling the icon then re-enabling but this seems to be an intermittent problem. Any ideas out there? -- Dave in Glasgow, Scotland using Vista Home Premium Intel Core2 Duo E6300 2.5Gb ram Nvidia GeForce 7650GS (with DVB-T hdmi out) Tag: unable to open drives Tag: 172873
  - 12
    - Changing Names of Photographs How do I change the name of the photographs in My Pictures Media Center? Tag: unable to open drives Tag: 172872
  - 13
    - Burning Windows Movie Maker File I'm having an issue whereby I create a Movie Maker file (in wmv format), it saves to my hard drive without a problem and also seems to burn to disc properly also. However, when I try and play the disc on another computer, the file doesn't even show up. But if I play the disc on the computer I burned it from, the file is there. Is there a setting I need to adjust for it to play/show up on another computer when I burn it to CD? MM Tag: unable to open drives Tag: 172871
  - 14
    - system crash Please help...woke up this morning and computer not responding. Tried to restart and after f11 comes up with blue screen and stop error 0x0000000a(0xf760e04b,0x00000002,0x00000000,0x8043c402) Worked fine yesterday...will not start in any mode (safe, last configuration, normal) No new hardware or software installed.. worked yesterday, not working today. Was going to try to reinstall...but I have pictures I do not want to lose. Can anyone help please ????? Thanks -- rlmabbott Tag: unable to open drives Tag: 172870
  - 15
    - Problem with Windows Media Center in Vista - I'm hoping that someone in the group can assit. I have a new HP Pavilion laptop with Vista Home Premium, or at least I've had it for the past 6 weeks and have loved it, however WMC throws errors during repetitive tasks. This is frequent enough that it has rendered WMC unusuable. The specific error is: An unhandled exception ('.NullReferenceException.4313665F') occurred in ehrec.exe [3788]. My product version is: Windows Media Center Windows Vista Version 6.0.6000.16484 The only two pieces of software which I have installed recently are yahoo messenger and Microsoft Silverlight. I suspec that the latter may be the cause. Either that or WMC has just got itself in a twist. I have tried system restore to a point about a week ago with no success. My question is - how can I fix this without reinstalling Vista? MS in their wisdom seem to have made it impossible to uninstall and re- install WMC in Vista HP. Any assistance or guidance would be appreciated! Stewart Tag: unable to open drives Tag: 172868
  - 16
    - Re: Lagging analog TV in Vista MC Anybody? This is really getting on my nerves.. > No, we didn't mean that, at least I didn't. The sound and image lag, as if > you were watching a scratched DVD... > >> If all you mean is that the TV show displayed in Media Center is a few >> seconds behind what you see on a regular TV set this is perfectly normal. >> Media Center buffers the TV content onto the harddrive before playing. >> This allows use of the playback controls on the remote/keyboard, like >> skip, pause etc.. AFAIK you cannot turn off this buffering in MC. >> >> "Ben" <Ben@discussions.microsoft.com> wrote in message >> news:17186CFE-A7CE-49D5-900C-1354C90AF11D@microsoft.com... >>> Hello, >>> >>> When watching analog cable TV in Vista Media Center, the image and sound >>> lags horribly. I tried changing decoders (MS, MainConcept, nVidia), but >>> it >>> didn't really get better. >>> With another program, called ChrisTV, it works perfectly. >>> >>> I believe it's due to the processing power timeshifting requires. Is >>> there >>> any way to disable this? >>> >>> Thanks, >>> Ben >> >> > Tag: unable to open drives Tag: 172865
  - 17
    - Media Center shows a green screen, no TV I recently got a computer with Vista Ultimate and went into Media Center to watch some TV but it doesn't work. The screen shows either green or blank and there is no sound. My video card drivers are up-to-date (Nvidia 8800 Ultra) and DVDs play fine. My TV tuner is a Hauppauge PVR PCI II. Any help or steering in the right direction would be much appreciated. Thanks. Tag: unable to open drives Tag: 172864
  - 18
    - moving the media window I inadvertantly moved my media window to the top of my monitor screen and now cannot access the top bar to move it back down. I maximize and minimize but that top bar is still not availble to 'grab'. Any suggestions? Thanks.... Tag: unable to open drives Tag: 172862
  - 19
    - Windows Media Center does not pick up my TV Tuner I recntly bought my computer like 2 months ago and it came with a tv tuner. it was working fine intill windows vista did some kind of update and now Window Media center says that there is no Tv tuner installed when i try to watch tv. I have taken out the tv tuner card, restarted my computer and then pug it back in. the device manager says that the device is working properly. i also updated the driver for the turner. I think there is something wrong with Windows Media Center. Can anyone help me? the tv tuner is a Hauppauge WinTV HVR - 1600 NTSC/ATSC Combo Tag: unable to open drives Tag: 172861
  - 20
    - Help MCE + X360 Hi all, i'm in trouble trying to connect my Xbox 360 to Windows Media Center as an Extender... I have followed on-screen instructions a dozen times, but never come to a solution.. Searched on internet but found nothing... The network looks like this: One PC with WMCE 2005 hard-wired to a d-link hub X360 hard-wired to the same hub The hub connected to the router. I have also tried to leave the two connected trough the hub without internet connection, but nothing happened... When I try to connect the two, I take the security codes from the Xbox, then, followin the instructions, insert the codes when asked by the media center extender software, click next, then the Xbox starts the black WMC screen with loading circles, PC shows something like "connecting to Xbox 360" and, after some seconds, the xbox and the pc say that can't find the other... Searching in logs found this in DvcConn.log: 15.04.35 : Waiting for security codes exchange status. *********************************************************** ERROR *********************************************************** Security code exchange timed out. I've searched everywhere and I can't find a fix for me... Help plz! Michele. Tag: unable to open drives Tag: 172858
  - 21
    - cant play most codecs in wmc hello folks,hope there is a simple fix for this, i am using vista ultimate 64, i can play all vid formats fine in windows media player, checked that all codecs are there, so from what i gather you should then be able to play all these codecs in windows media center,but no! so far i have only been able to play avi that has not been compressed (i do a bit of hobby 3d modeling and animation) and tv that has been recorded by media center itself, it lists all other videos in the library, apart from mpeg4 but it just says cant find the codec? surely it should be able to play its own microsoft codecs!? Tag: unable to open drives Tag: 172851
  - 22
    - Media Center not working Everytime I open Media Center, I get the following message: ehshell.exe - Common Language Routine Debugging Service Application has generated an exception that could not be handled. Process id=0xf50(3920), Threadid=0x5a4(1444) Click OK to terminate application. Click CANCEL to debug application. I click CANCEL and get the following message: ehshel.exe - No debugger found Registerd JIT debugger is not available. An attempt to launch JIT debugger with following command resulted in error code of 0x2 (2). Please check settings. cordbg.exe ! a 0xf50 Someone please help me. I have done the required updates for the Windows XP Media Center 2005. I am truly stuck and don't know what to do. Tag: unable to open drives Tag: 172847
  - 23
    - after AdAware removal its still appears Ran the Ad-Aware SE scan found and deleted it. So it says but when I rescan it, Win32 AdWare.Cinmus still show up (either in Normal ot Safe mode). Its location CLSID \{385ABBC-FB22-4D17-8834-064E2BA0A6F0} which when I go to the registry/location and expand there are 2 items + InprocServer32 - hightlight and right pan shows default REG_SZ C:\DOC & SettING\ALL USERS\APPLICATION DATA\MICROSOFT\PCTOOLS\PCTOOLS.DLL Threading Model REG_SZ Apartment +TypeLib and hightlight and right pan shows the default REG_SZ {385ABBC-FB22-4D17-8834-064E2BA0A6F0} can some advice what shall I do here? On item 1 do I hightlight the Threading Model on the right pan and delete this item or instead of 'Apartment' leave it blank o Many thanks for your education. Tag: unable to open drives Tag: 172846
  - 24
    - Live TV not working I watch tv on my computer on the media center quite frequently with digital cable. The live TV is black with only the name of the show that should be playing. It was giving me a video error until I took out and put back in my video card and tuner card(???). I'm stuck and can't get it working, any ideas? Tag: unable to open drives Tag: 172845
  - 25
    - Turning off the "Current Frame, CPU Load..." display on WMP11 for I am trying to find a way to turn off the green message box that appears on my screen whenever I try to play a movie in Windows Media Player 11 for XP. I cannot find the tab, radio button or whatever to turn this feature off because it is really annoying. If anybody knows the solution, please email me or post it here for future reference for others. Thanks :) Tag: unable to open drives Tag: 172840

Hi,

Today I am unable to open my C: and E: drives when i double click on them,
it prompts me "choose the program you want to use to open the file ", I tried
to restrore but in vain ? i still can open the drives using explore but is
there a permanent solution to this problem ?

Thanks so much
Halim

Top